Comparison of two functionalized fullerenes for antimicrobial photodynamic inactivation: Potentiation by potassium iodide and photochemical mechanisms

Sulfonamide Porphyrins as Potent Photosensitizers against Multidrug-Resistant Staphylococcus aureus (MRSA): The Role of Co-Adjuvants

Sulfonamides are a conventional class of antibiotics that are well-suited to combat infections. However, their overuse leads to antimicrobial resistance. Porphyrins and analogs have demonstrated excellent photosensitizing properties and have been used as antimicrobial agents to photoinactivate microorganisms, including multiresistant Staphylococcus aureus (MRSA) strains. It is well recognized that the combination of different therapeutic agents might improve the biological outcome. In this present work, a novel meso-arylporphyrin and its Zn(II) complex functionalized with sulfonamide groups were synthesized and characterized and the antibacterial activity towards MRSA with and without the presence of the adjuvant KI was evaluated. For comparison, the studies were also extended to the corresponding sulfonated porphyrin TPP(SO₃H)₄. Photodynamic studies revealed that all porphyrin derivatives were effective in photoinactivating MRSA (>99.9% of reduction) at a concentration of 5.0 μM upon white light radiation with an irradiance of 25 mW cm^-2 and a total light dose of 15 J cm^-2. The combination of the porphyrin photosensitizers with the co-adjuvant KI during the photodynamic treatment proved to be very promising allowing a significant reduction in the treatment time and photosensitizer concentration by six times and at least five times, respectively. The combined effect observed for TPP(SO₂NHEt)₄ and ZnTPP(SO₂NHEt)₄ with KI seems to be due to the formation of reactive iodine radicals. In the photodynamic studies with TPP(SO₃H)₄ plus KI, the cooperative action was mainly due to the formation of free iodine (I₂).

Antimicrobial Photodynamic Effect of Cross-Kingdom Microorganisms with Toluidine Blue O and Potassium Iodide

Streptococcus mutans (S. mutans) and Candida albicans (C. albicans) are prominent microbes associated with rapid and aggressive caries. In the present study, we investigated the antimicrobial efficacy, cytotoxicity, and mechanism of toluidine blue O (TBO)-mediated antimicrobial photodynamic therapy (aPDT) and potassium iodide (KI). The dependence of KI concentration, TBO concentration and light dose on the antimicrobial effect of aPDT plus KI was determined. The cytotoxicity of TBO-mediated aPDT plus KI was analyzed by cell counting kit-8 (CCK-8) assay. A singlet oxygen (1O2) probe test, time-resolved 1O2 detection, and a 1O2 quencher experiment were performed to evaluate the role of 1O2 during aPDT plus KI. The generation of iodine and hydrogen peroxide (H2O2) were analyzed by an iodine starch test and Amplex red assay. The anti-biofilm effect of TBO-mediated aPDT plus KI was also evaluated by counting forming unit (CFU) assay. KI could potentiate TBO-mediated aPDT against S. mutans and C. albicans in planktonic and biofilm states, which was safe for human dental pulp cells. 1O2 measurement showed that KI could quench 1O2 signals, implicating that 1O2 may act as a principal mediator to oxidize excess iodide ions to form iodine and H2O2. KI could highly potentiate TBO-mediated aPDT in eradicating S. mutans and C. albicans due to the synergistic effect of molecular iodine and H2O2.

Development of a Polymeric Film Entrapping Rose Bengal and Iodide Anion for the Light-Induced Generation and Release of Bactericidal Hydrogen Peroxide

A series of poly(2-hydroxyethyl methacrylate) (PHEMA) thin films entrapping photosensitizer Rose Bengal (RB) and tetrabutylammonium iodide (TBAI) have been synthetized. The materials have been characterized by means of Thermogravimetric Analysis (TGA), Attenuated Total Reflectance Fourier Transform Infrared Spectroscopy (ATR-FTIR) and UV-vis Absorption spectroscopy. Irradiation of the materials with white light led to the generation of several bactericidal species, including singlet oxygen (¹O₂), triiodide anion (I₃^-) and hydrogen peroxide (H₂O₂). ¹O₂ production was demonstrated spectroscopically by reaction with the chemical trap 2,2'-(anthracene-9,10-diylbis(methylene))dimalonic acid (ABDA). In addition, the reaction of iodide anion with ¹O₂ yielded I₃^- inside the polymeric matrix. This reaction is accompanied by the formation of H₂O₂, which diffuses out the polymeric matrix. Generation of both I₃^- and H₂O₂ was demonstrated spectroscopically (directly in the case of triiodide by the absorption at 360 nm and indirectly for H₂O₂ using the xylenol orange test). A series of photodynamic inactivation assays were conducted with the synthesized polymers against Gram-negative bacteria Escherichia coli and Pseudomonas aeruginosa. Complete eradication (7 log₁₀ CFU/mL) of both bacteria occurred after only 5 min of white light irradiation (400-700 nm; total energy dose 24 J/cm²) of the polymer containing both RB and TBAI. The control polymer without embedded iodide (only RB) showed only marginal reductions of ca. 0.5 log₁₀ CFU/mL. The main novelty of the present investigation is the generation of three bactericidal species (¹O₂, I₃^- and H₂O₂) at the same time using a single polymeric material containing all the elements needed to produce such a bactericidal cocktail, although the most relevant antimicrobial activity is shown by H₂O₂. This experimental approach avoids multistep protocols involving a final step of addition of I^-, as described previously for other assays in solution.

The Overlooked Photochemistry of Iodine in Aqueous Suspensions of Fullerene Derivatives

Fullerene's low water solubility was a serious challenge to researchers aiming to harness their excellent photochemical properties for aqueous applications. Cationic functionalization of the fullerene cage provided the most effective approach to increase water solubility, but common synthesis practices inadvertently complicated the photochemistry of these systems by introducing iodide as a counterion. This problem was overlooked until recent work noted a potentiation effect which occurred when photosensitizers were used to inactivate microorganisms with added potassium iodide. In this work, several photochemical pathways were explored to determine the extent and underlying mechanisms of iodide's interference in the photosensitization of singlet oxygen by cationic fulleropyrrolidinium ions and rose bengal. Triplet excited state sensitizer lifetimes were measured via laser flash photolysis to probe the role of I^- in triplet sensitizer quenching. Singlet oxygen production rates were compared across sensitizers in the presence or absence of I^-, SO₄^2-, and other anions. 3,5-Dimethyl-1H-pyrazole was employed as a chemical probe for iodine radical species, such as I·, but none were observed in the photochemical systems. Molecular iodine and triiodide, however, were found in significant quantities when photosensitizers were irradiated in the presence of I^- and O₂. The formation of I₂ in these photochemical systems calls into question the interpretations of prior studies that used I^- as a counterion for photosensitizer materials. As an example, MS2 bacteriophages were inactivated here by cationic fullerenes with and without I^- present, showing that I^- moderately accelerated the MS2 deactivation, likely by producing I₂. Production of I₂ did not appear to be directly correlated with estimates of ¹O₂ concentration, suggesting that the relevant photochemical pathways are more complex than direct reactions between ¹O₂ and I^- in the bulk solution. On the basis of the results here, iodine photochemistry may be underappreciated and misunderstood in other environmental systems.

In Vivo Potentiation of Antimicrobial Photodynamic Therapy in a Mouse Model of Fungal Infection by Addition of Potassium Iodide

Antimicrobial photodynamic inactivation (aPDI) involves the use of a nontoxic dye or photosensitizer excited with visible light to produce reactive oxygen species that can kill all classes of microorganisms. Antimicrobial photodynamic therapy (aPDT) can be used in vivo as an alternative therapeutic strategy to treat localized infections due to its ability to selectively kill microbes while preserving host mammalian cells. aPDI can be potentiated by the addition of the nontoxic inorganic salt potassium iodide (KI). KI is an approved drug for antifungal therapy. The mechanism of potentiation with iodide is likely to be singlet oxygen addition to iodide to form iodine radicals, hydrogen peroxide, and molecular iodine. A previous chapter in this volume described potentiation of aPDI in vitro by addition of KI, while in this chapter we address the ability of KI to potentiate aPDT in vivo using an animal model of localized fungal infection. We employed oral candidiasis in immunosuppressed mice caused by a bioluminescent strain of Candida albicans and monitored by bioluminescence imaging.

Potentiation Effect of Iodine Species on the Antimicrobial Capability of Surfaces Coated with Electroactive Phthalocyanines

The spreading of different infections can occur through direct contact with glass surfaces in commonly used areas. Incorporating the use of alternative therapies in these materials seems essential to reduce and also avoid bacterial resistance. In this work, the capability to kill microbes of glass surfaces coated with two electroactive metalated phthalocyanines (ZnPc-EDOT and CuPc-EDOT) is assessed. The results show that both of these materials are capable of producing reactive oxygen species; however, the polymer with Zn(II) (ZnPc-PEDOT) has a singlet oxygen quantum yield 8-fold higher than that of the Cu(II) containing analogue. This was reflected in the in vitro experiments where the effectiveness of the surfaces was tested in bacterial suspensions, monitoring single microbe inactivation upon attachment to the polymers, and eliminating mature biofilms. Furthermore, we evaluated the use of an inorganic salt (KI) to potentiate the photodynamic inactivation mediated by an electropolymerized surface. The addition of the salt improved the efficiency of phototherapy at least two times for both polymers; nevertheless, the material coated with ZnPc-PEDOT was the only one capable of eliminating >99.98% of the initial microbes loading under different circumstances.

Antimicrobial Photodynamic Approach in the Inactivation of Viruses in Wastewater: Influence of Alternative Adjuvants

Pathogenic viruses are frequently present in marine and estuarine waters, due to poor wastewater (WW) treatments, which consequently affect water quality and human health. Chlorination, one of the most common methods used to ensure microbiological safety in tertiarily treated effluents, may lead to the formation of toxic chemical disinfection by-products on reaction with organic matter present in the effluents. Antimicrobial photodynamic therapy (aPDT) can be a promising disinfecting approach for the inactivation of pathogens, without the formation of known toxic by-products. Additionally, some studies have reported the potentiator effect on aPDT of some compounds, such as potassium iodide (KI) and hydrogen peroxide (H2O2). In the present study, the aPDT efficiency of a PS formulation constituted of five cationic porphyrins (Form) in the inactivation of E. coli T4-like bacteriophage, a model of mammalian viruses, in different aqueous matrices with different organic matter content, was evaluated. Photoinactivation studies were performed at different concentrations of Form and in the presence of the adjuvants KI and H2O2. The results showed that the efficiency of bacteriophage photoinactivation is correlated with the Form concentration, the amount of the organic matter in WW, and the adjuvant type. Form can be an effective alternative to controlling viruses in WW, particularly if combined with H2O2, allowing to significantly reduce PS concentration and treatment time. When combined with KI, the Form is less effective in inactivating T4-like bacteriophage in WW.

Tuning the Polarity of Fullerene C60 Derivatives for Enhanced Photodynamic Inactivation†

In this article, four novel fulleropyrrolidines derivatives were synthesized to study how the effect of polarity and positive charge distribution can influence the efficacy of photodynamic inactivation treatments to kill bacteria. The design of the photosensitizers was based on DFT calculations that allowed us to estimate the dipolar moment of the molecules. Neutral compounds bearing N-methyl bis-acetoxy-ethyl (1) and bis-hydroxyethyl (2) amine were the starting material to obtain the dicationic analogs N,N-dimethyl bis-methoxyethyl (3), and bis-acetoxy-ethyl) (4) methylammonio. As expected from fullerene C₆₀ derivatives, compounds 1-4 absorb in the UV region, with a peak at 430 nm, a broader range of absorption up to 710 nm, and exhibit weak fluorescence emission in toluene and reverse micelles. In the biomimetic AOT micellar system, the highest singlet oxygen photosensitization was found for compounds 1, followed by 3, 2, and 4. Whereas 4 was the most effective reducing nitro blue tetrazolium in the presence of β-NADH. The influence of type I and type II mechanism on the photodynamic activity of compounds 3 and 4 was further examined in the presence of L-tryptophan and two reactive oxygen species scavengers. In vitro experiments indicated that the compounds with the highest dipolar moments, 3 (37.19 D) and 4 (38.46 D), inactivated methicillin-resistant Staphylococcus aureus and Escherichia coli bacteria using an energy dose <2.4 J cm^-2 . No inactivation was observed for the neutral analogs with the lowest dipolar moments. These findings help to optimize sensitizer structures to improve photodynamic inactivation.

Antimicrobial photodynamic therapy for oral Candida infection in adult AIDS patients: A pilot clinical trial

BACKGROUND

Antimicrobial photodynamic therapy (aPDT) using methylene blue (MB) plus potassium iodide (KI) has been shown to be effective in killing Candida albicans in many in vitro and in vivo studies, however, there are limited reports of clinical investigations. This study aimed to explore the clinical application of aPDT with MB plus KI for the treatment of oral infection caused by C. albicans in adult acquired immune deficiency syndrome (AIDS) patients.

METHODS

A total of 21 adult AIDS patients with C. albicans oral candidiasis were divided into two groups according to MB concentration and received two consecutive aPDT treatments. Immediately before and after the aPDT treatments, C. albicans yeast isolates were recovered to measure the colony-forming units per mL (CFU/mL), biofilm formation, and to analyze the 25S rDNA genotype. Patients were assessed for the clinical recovery of oral lesions and improvement of symptoms.

RESULTS

The Log₁₀ CFU/mL of C. albicans decreased significantly after the second aPDT but not the first aPDT. There was no significant difference between the two MB concentrations. Both aPDT protocols decreased the oral lesions and clinical symptoms with no significant difference after 2-fraction aPDT. The biofilm formation of C. albicans isolates did not change before and after aPDT. The killing efficiency of 2-fraction-aPDT was not associated with either biofilm formation or 25S rDNA genotype.

CONCLUSIONS

Two-fraction-aPDT with MB plus KI could reduce the number of viable C. albicans fungal cells and improve the clinical symptoms of oral candidiasis in adult AIDS patients, regardless of the biofilm formation or 25S rDNA genotype of infected C. albicans isolates.

Carbon nanomaterials against pathogens; the antimicrobial activity of carbon nanotubes, graphene/graphene oxide, fullerenes, and their nanocomposites

Recently, antibiotic resistance of pathogens has grown given the excessive and inappropriate usage of common antimicrobial agents. Hence, producing novel antimicrobial compounds is a necessity. Carbon nanomaterials (CNMs) such as carbon nanotubes, graphene/graphene oxide, and fullerenes, as an emerging class of novel materials, can exhibit a considerable antimicrobial activity, especially in the nanocomposite forms suitable for different fields including biomedical and food applications. These nanomaterials have attracted a great deal of interest due to their broad efficiency and novel features. The most important factor affecting the antimicrobial activity of CNMs is their size. Smaller particles with a higher surface to volume ratio can easily attach onto the microbial cells and affect their cell membrane integrity, metabolic procedures, and structural components. As these unique characteristics are found in CNMs, a wide range of possibilities have raised in terms of antimicrobial applications. This study aims to cover the antimicrobial activities of CNMs (both as individual forms and in nanocomposites) and comprehensively explain their mechanisms of action. The results of this review will present a broad perspective, summarizes the most remarkable findings, and provides an outlook regarding the antimicrobial properties of CNMs and their potential applications.

Effects of Rose Bengal- and Methylene Blue-Mediated Potassium Iodide-Potentiated Photodynamic Therapy on Enterococcus faecalis: A Comparative Study

BACKGROUND AND OBJECTIVES

This study was performed to compare the use of methylene blue (MB) and rose bengal (RB) in antimicrobial photodynamic therapy (PDT) targeting Enterococcus faecalis (E. faecalis) bacteria in planktonic and biofilm forms with potassium iodide (KI) potentiation.

STUDY DESIGN/MATERIALS AND METHODS

E. faecalis bacteria in planktonic form were exposed to antimicrobial PDT protocols activating MB and RB, with or without KI potentiation, following laser irradiation with different exposure times, 60 mW/cm² laser power, and different photosensitizer agent (PS)/potentiator concentrations to observe relationships among the variables. Two continuous-wave diode lasers were used for irradiation (red light: λ = 660 nm and green light: λ = 565 nm). The pre-irradiation time was 10 minutes. The vitality of E. faecalis biofilm was assessed by confocal laser scanning microscopy, and the morphology was determined by scanning electron microscopy. The effects on the proliferation of stem cells from the apical papilla (SCAPs) were analyzed by cell counting kit-8 assay. The staining effect of antimicrobial PDT on dentin slices was investigated. Statistical analysis using a one-way analysis of variance was done.

RESULTS

KI-potentiated RB and MB antimicrobial PDT both effectively eradicated E. faecalis bacteria in planktonic and biofilm forms. The minimum bactericidal concentrations of PSs (±100 mM KI) were obtained through PDT on planktonic E. faecalis, and the optimal light parameters were 60 mW/cm² , 6 J/cm² for 100 seconds. KI-potentiated PDT effectively strengthened the ability to inhibit E. faecalis biofilm with 86.50 ± 5.78% for MB (P = 0.0015 < 0.01) and 91.50 ± 1.75% for RB (P = 0.0418 < 0.05) of bactericidal rate, with less toxicity for SCAPs (P < 0.001) and less staining. KI could reduce the staining induced by antimicrobial PDT on dentin slices.

CONCLUSION

A combination of KI and antimicrobial PDT may be a useful alternative to conventional disinfection methods in endodontic treatment. MB and RB antimicrobial PDT at much lower concentrations with KI could hopefully achieve disinfection effects comparable with those of 1.5% NaClO while causing few adverse effects on SCAPs. KI helps to avoid staining problems associated with high concentrations of photosensitizer agents. Lasers Surg. Med. © 2020 Wiley Periodicals, LLC.

Efficient photodynamic inactivation of Candida albicans by porphyrin and potassium iodide co-encapsulation in micelles

Photodynamic inactivation of bacterial and fungal pathogens is a promising alternative to the extensive use of conventional single-target antibiotics and antifungal agents. The combination of photosensitizers and adjuvants can improve the photodynamic inactivation efficiency. In this regard, it has been shown that the use of potassium iodide (KI) as adjuvant increases pathogen killing. Following our interest in this topic, we performed the co-encapsulation of a neutral porphyrin photosensitizer (designated as P1) and KI into micelles and tested the obtained nanoformulations against the human pathogenic fungus Candida albicans. The results of this study showed that the micelles containing P1 and KI displayed a better photodynamic performance towards C. albicans than P1 and KI in solution. It is noteworthy that higher concentrations of KI within the micelles resulted in increased killing of C. albicans. Subcellular localization studies by confocal fluorescence microscopy revealed that P1 was localized in the cell cytoplasm, but not in the nuclei or mitochondria. Overall, our results show that a nanoformulation containing a photosensitizer plus an adjuvant is a promising approach for increasing the efficiency of photodynamic treatment. Actually, the use of this strategy allows a considerable decrease in the amount of both photosensitizer and adjuvant required to achieve pathogen killing.

The Remarkable Effect of Potassium Iodide in Eosin and Rose Bengal Photodynamic Action against Salmonella Typhimurium and Staphylococcus aureus

Antimicrobial photodynamic therapy (aPDT) has been shown as a promising technique to inactivate foodborne bacteria, without inducing the development of bacterial resistance. Knowing that addition of inorganic salts, such as potassium iodide (KI), can modulate the photodynamic action of the photosensitizer (PS), we report in this study the antimicrobial effect of eosin (EOS) and rose bengal (RB) combined with KI against Salmonella enterica serovar Typhimurium and Staphylococcus aureus. Additionally, the possible development of bacterial resistance after this combined aPDT protocol was evaluated. The combination of EOS or RB, at all tested concentrations, with KI at 100 mM, was able to efficiently inactivate S. Typhimurium and S. aureus. This combined approach allows a reduction in the PS concentration up to 1000 times, even against one of the most common foodborne pathogenics, S. Typhimurium, a gram-negative bacterium which is not so prone to inactivation with xanthene dyes when used alone. The photoinactivation of S. Typhimurium and S. aureus by both xanthenes with KI did not induce the development of resistance. The low price of the xanthene dyes, the non-toxic nature of KI, and the possibility of reducing the PS concentration show that this technology has potential to be easily transposed to the food industry.

Novel nanomaterial-based antibacterial photodynamic therapies to combat oral bacterial biofilms and infectious diseases

Oral diseases such as tooth caries, periodontal diseases, endodontic infections, etc., are prevalent worldwide. The heavy burden of oral infectious diseases and their consequences on the patients' quality of life indicates a strong need for developing effective therapies. Advanced understandings of such oral diseases, e.g., inflammatory periodontal lesions, have raised the demand for antibacterial therapeutic strategies, because these diseases are caused by viruses and bacteria. The application of antimicrobial photodynamic therapy (aPDT) on oral infectious diseases has attracted tremendous interest in the past decade. However, aPDT had a minimal effect on the viability of organized biofilms due to the hydrophobic nature of the majority of the photosensitizers (PSs). Therefore, novel nanotechnologies were rapidly developed to target the delivery of hydrophobic PSs into microorganisms for the antimicrobial performance improvement of aPDT. This review focuses on the state-of-the-art of nanomaterials applications in aPDT against oral infectious diseases. The first part of this article focuses on the cutting-edge research on the synthesis, toxicity, and therapeutic effects of various forms of nanomaterials serving as PS carriers for aPDT applications. The second part discusses nanomaterials applications for aPDT in treatments of oral diseases. These novel bioactive nanomaterials have demonstrated great potential to serve as carriers for PSs to substantially enhance the PDT therapeutic effects. Furthermore, the novel aPDT applications not only have exciting therapeutic potential to inhibit bacterial plaque-initiated oral diseases, but also have a wide applicability to other biomedical and tissue engineering applications.

Advances in aPDT based on the combination of a porphyrinic formulation with potassium iodide: Effectiveness on bacteria and fungi planktonic/biofilm forms and viruses

The increasing world-wide rate of antibiotic resistance as well as the capacity of microorganisms to form biofilms, have led to a higher incidence of mortal infections that require alternative methods for their control. Antimicrobial photodynamic therapy (aPDT) emerged as an effective solution against resistant strains. The present work aims to evaluate the aPDT efficiency of a photosensitizer (PS) based on a low-cost formulation constituted by five cationic porphyrins (FORM) and its potentiation effect by KI on a broad spectrum of microorganisms under white light (380–700 nm, 25 W/m[Formula: see text]. The aPDT assays were performed with different concentrations of FORM (0.1 to 5.0 [Formula: see text]M) and 100 mM of KI on planktonic and biofilm forms of gram-positive (methicillin resistant Staphylococcus aureus–MRSA) and gram-negative (Escherichia coli resistant to chloramphenicol and ampicillin) bacteria, of the fungi Candida albicans and on a T4-like bacteriophage as a mammalian virus model. The results indicate that the FORM alone is an efficient PS to photoinactivate not only gram-negative and gram-positive bacteria, but also C. albicans, in planktonic and biofilm forms, and T4-like phage at low concentrations (<5.0 [Formula: see text]M). The presence of KI enhanced the photodynamic effect of this FORM for all microorganisms on the planktonic form, allowing the reduction of PS concentration and treatment time. The results also show that the combination FORM/KI is highly efficient in the elimination of already well-established biofilms of E. coli,S. aureus and C. albicans. This effect is probably associated with longer-lived iodine reactive species produced during the aPDT treatment.

Complexation with C60 Fullerene Increases Doxorubicin Efficiency against Leukemic Cells In Vitro

Conventional anticancer chemotherapy is limited because of severe side effects as well as a quickly evolving multidrug resistance of the tumor cells. To address this problem, we have explored a C₆₀ fullerene-based nanosized system as a carrier for anticancer drugs for an optimized drug delivery to leukemic cells.Here, we studied the physicochemical properties and anticancer activity of C₆₀ fullerene noncovalent complexes with the commonly used anticancer drug doxorubicin. C₆₀-Doxorubicin complexes in a ratio 1:1 and 2:1 were characterized with UV/Vis spectrometry, dynamic light scattering, and high-performance liquid chromatography-tandem mass spectrometry (HPLC-MS/MS). The obtained analytical data indicated that the 140-nm complexes were stable and could be used for biological applications. In leukemic cell lines (CCRF-CEM, Jurkat, THP1 and Molt-16), the nanocomplexes revealed ≤ 3.5 higher cytotoxic potential in comparison with the free drug in a range of nanomolar concentrations. Also, the intracellular drug's level evidenced C₆₀ fullerene considerable nanocarrier function.The results of this study indicated that C₆₀ fullerene-based delivery nanocomplexes had a potential value for optimization of doxorubicin efficiency against leukemic cells.

An Insight Into the Potentiation Effect of Potassium Iodide on aPDT Efficacy

Antimicrobial photodynamic therapy (aPDT) is gaining a special importance as an effective approach against multidrug-resistant strains responsible of fatal infections. The addition of potassium iodide (KI), a non-toxic salt, is recognized to increase the aPDT efficiency of some photosensitizers (PSs) on a broad-spectrum of microorganisms. As the reported cases only refer positive aPDT potentiation results, in this work we selected a broad range of porphyrinic and non-porphyrinic PSs in order to gain a more comprehensive knowledge about this aPDT potentiation by KI. For this evaluation were selected a series of meso-tetraarylporphyrins positively charged at meso positions or at β-pyrrolic positions and the non-porphyrinic dyes Methylene blue, Rose Bengal, Toluidine Blue O, Malachite Green and Crystal Violet; the assays were performed using a bioluminescent E. coli strain as a model. The results indicate that KI has also the ability to potentiate the aPDT process mediated by some of the cationic PSs [Tri-Py(+)-Me, Tetra-Py(+)-Me, Form, RB, MB, Mono-Py(+)-Me, β-ImiPhTPP, β-ImiPyTPP, and β-BrImiPyTPP] allowing a drastic reduction of the treatment time as well as of the PS concentration. However, the efficacy of some porphyrinic and non-porphyrinic PSs [Di-Py(+)-Me opp , Di-Py(+)-Me adj , Tetra-Py, TBO, CV, and MG] was not improved by the presence of the coadjuvant. For the PSs tested in this study, the ones capable to decompose the peroxyiodide into iodine (easily detectable by spectroscopy or by the visual appearance of a blue color in the presence of amylose) were the most promising ones to be used in combination with KI. Although these studies confirmed that the generation of 1O2 is an important fact in this process, the PS structure (charge number and charge position), aggregation behavior and affinity for the cell membrane are also important features to be taken in account.