Photocatalytic activity of ZnO-WO3 for diclofenac degradation under visible light irradiation

High photocatalytic efficiency of a ZnO nanoplate/Fe2O3 nanospindle hybrid using visible light for methylene blue degradation

In this work, ZnO nanoplates and Fe2O3 nanospindles were successfully fabricated via a simple hydrothermal method using inorganic salts as precursors. The ZnO/Fe2O3 hybrid was fabricated using a mechanical mixture of two different ZnO : Fe2O3 weight ratios to investigate the effect of weight ratio on catalytic properties. Scanning electron microscopy (SEM) and transmission electron microscopy (TEM) images showed that ZnO nanoplates (NPls) are about 20 nm thick with lateral dimensions of 100 × 200 nm, and Fe2O3 nanospindles (NSs) are about 500 nm long and 50 nm wide. X-ray diffraction (XRD) patterns revealed the successful formation of the ZnO, Fe2O3, and ZnO/Fe2O3 samples and indicated that their crystallite sizes varied from 20 to 29 nm depending on the ZnO : Fe2O3 weight ratio. Ultraviolet-visible (UV-vis) spectra showed that the bandgap energies of ZnO and Fe2O3 were 3.15 eV and 2.1 eV, respectively. Energy dispersive X-ray spectroscopy (EDS) results revealed the successful combination of ZnO and Fe2O3. Photocatalytic activity of the materials was evaluated through the degradation of methylene blue (MB) in aqueous solution under green light-emitting diode (GLED) irradiation. The results indicated that the ZnO/Fe2O3 composite showed a remarkable enhanced degradation capacity compared to bare ZnO NPls and Fe2O3 NSs. The ZnO : Fe2O3 = 3 : 2 sample demonstrated the best performance among all samples under identical conditions with a degradation efficiency of 99.3% for MB after 85 min. The optimum photocatalytic activity of the sample with ZnO : Fe2O3 = 3 : 2 was nearly 3.6% higher than that of the pure ZnO sample and 1.12 times more than that of the pristine Fe2O3 sample. Moreover, the highest photo-degradation was obtained at a photocatalyst dosage of 0.25 g l-1 in dye solution.

Efficient photocatalytic degradation of diclofenac drug using the Zn1-x-yPrxAlyO photocatalyst under UV light irradiation

Herein, we report the efficient photocatalytic degradation of the diclofenac drug using the Zn1-x-yPrxAlyO photocatalyst [x, y] = (0.00, 0.00), (0.03, 0.01), (0.03,0.03) under UV light irradiation. The analysis of the structure reveals that the Pr3+ and Al3+ cations insertion into the ZnO lattice leads to a decrease in the lattice constant (a and c), Zn-O bond length, strain lattice, and crystallite size. These alterations are linked to the high degree of atomic disorder triggered by the dopants, which produce stress and strain in the ZnO structure. The Raman measurements confirmed the structural phase and showed changes in the position and intensity of the E2High mode, associated with oxygen vibrations and material crystallinity. The presence of the dopants reduces the concentration of VZn and VO++ type defects while increasing the levels of VO, VO+, and Oi defects, as observed from the fitting of the Photoluminescence spectra. Furthermore, it was noted that de Pr3+ and Al3+ cations insertion into ZnO increases the optical band gap, which is associated with the Moss-Burstein effect. The micrograph images show that dopants transform the morphology from quasi-spherical particles to irregular cluster structures. The textural analysis indicated that an increase in the concentration of Al3+ in the ZnO lattice led to a higher surface area, likely enhancing photocatalytic activity. The sample containing 3% Pr3+ and 3% Al3+ showed the highest photocatalytic activity and degraded up to 71.42% of diclofenac. In addition, experiments with scavengers revealed that hydroxyl radicals are the main species involved in the drug's photodegradation mechanism. Finally, the Zn1-x-yPrxAlyO compound is highly recyclable and stable.

An oxygen vacancy-rich BiO2-x/COF heterojunction for photocatalytic degradation of diclofenac

A BiO2-x/COF composite was successfully synthesized by simple mechanical ball milling. Compared to pure BiO2-x and COFs, the BiO2-x/COF composite (1 : 9) showed superior photocatalytic capability. Under visible light irradiation for 90 min, the photocatalytic degradation rate of DCF reached 97%. In addition, the characterization results showed that the formation of heterojunctions and the increase in oxygen vacancy concentration were the reasons for the enhancement of the photocatalytic activity. It is confirmed by free radical capture experiments that ˙O2- and h+ are the main reactive substances in the photocatalytic process. The photocatalytic degradation mechanism of the composite and the photocatalytic degradation pathway of diclofenac were deduced.

Photocatalytic Degradation of Organic Pollutants-Nile Blue, Methylene Blue, and Bentazon Herbicide-Using NiO-ZnO Nanocomposite

Water pollution poses a significant threat to both human health and ecosystem integrity. Chemical pollutants such as dyes and pesticides affect the water quality and endanger aquatic life. Among the methods for water purification from organic pollutants, photodegradation is certainly a valid technique to decrease such contaminants. In this work, pristine NiO, ZnO, and NiO-ZnO photocatalysts were synthesized by the homogeneous co-precipitation method. X-ray diffraction confirms the formation of a photocatalyst consisting of ZnO (Hexagonal) and NiO (Cubic) structures. The crystalline size was calculated by the Scherrer formula, which is 19 nm for the NiO-ZnO photocatalyst. The band gap measurements of the prepared samples were obtained using the Tauc Plot, equation which is 2.93 eV, 3.35 eV and 2.63 eV for NiO, ZnO, and NiO-ZnO photocatalysts, respectively. The photocatalytic performance of NiO-ZnO nanocomposite was evaluated through the degradation of Methylene Blue and Nile Blue dyes under sunlight, and Bentazon herbicide under a UV light. Photocatalyst degradation efficiency was 95% and 97% for Methylene Blue and Nile Blue in 220 min under sunlight while a degradation of 70% for Bentazon after 100 min under UV light source was found.

Highly efficient ZnO/WO3 nanocomposites towards photocatalytic gold recovery from industrial cyanide-based gold plating wastewater

Discharging the gold-contained wastewater is an economic loss. In this work, a set of ZnO/WO3 was facile synthesized by hydrothermal method in order to recover gold from the industrial cyanide-based gold plating wastewater by photocatalytic process. Effect of ZnO contents coupled with WO3 was first explored. Then, effects of operating condition including initial pH of wastewater, type of hole scavenger, concentration of the best hole scavenger and photocatalyst dose were explored. A series of experimental results demonstrated that the ZnO/WO3 nanocomposite with 5 wt% ZnO (Z5.0/WO3) depicted the highest photocatalytic activity for gold recovery due to the synergetic effect of oxygen vacancies, a well-constructed ZnO/WO3 heterostructure and an appropriate band position alignment with respect to the redox potentials of [Au(CN)2]- and hole scavengers. Via this ZnO/WO3 nanocomposite, approximately 99.5% of gold ions was recovered within 5 h using light intensity of 3.57 mW/cm2, catalyst dose of 2.0 g/L, ethanol concentration of 20 vol% and initial pH of wastewater of 11.2. In addition, high stability and reusability were observed with the best nanocomposite even at the 5th reuse. This work provides the guidance and pave the way for designing the ZnO/WO3 nanocomposite for precious metal recovery from a real industrial wastewater.

Optimal Architecture of a Dual S-Scheme ZnIn2S4-ZnO-Al2O3 Heterosystem with High H2 Evolution Rate under Visible Light

In this study, dual S-scheme ZnIn₂S₄-Al₂O₃-ZnO (ZIS-Al-Zn) heterojunctions were produced by a facile, low cost, and rapid combustion technique. These heterojunctions accelerated the photocatalytic hydrogen production due to the multi-channel-promoted separation of photocarriers. By optimizing the content of the components, the synthesized ZIS-Al-Zn composite with 20 wt% of ZnIn₂S₄ and 30 wt% of Al₂O₃ in the ZIS-Al-Zn composite demonstrated the highest hydrogen production rate of 54.2 mmol g^-1 h^-1, which was nearly 11 and 8.30 times better than ZnO-Al₂O₃ and ZnO-ZnIn₂S₄ composites, respectively. The results of DRS, PL, EIS, LSV, and CV techniques showed the highest shift in the light absorption, rapid interfacial transfer, and quenched recombination of photocarriers over the ternary ZIS-Al-Zn composite than single and binary catalysts. The obtained results revealed the formation of a dual S-scheme mechanism of transfer of photocarriers in ZIS-Al-Zn heterojunctions, contributing to better hydrogen production efficiency. The optimized ZIS-Al-Zn composite also exhibited good stability and reusability.

Experimental and computational study of metal oxide nanoparticles for the photocatalytic degradation of organic pollutants: a review

Photocatalysis is a more proficient technique that involves the breakdown or decomposition of different organic contaminants, various dyes, and harmful viruses and fungi using UV or visible light solar spectrum. Metal oxides are considered promising candidate photocatalysts owing to their low cost, efficiency, simple fabricating method, sufficient availability, and environment-friendliness for photocatalytic applications. Among metal oxides, TiO2 is the most studied photocatalyst and is highly applied in wastewater treatment and hydrogen production. However, TiO2 is relatively active only under ultraviolet light due to its wide bandgap, which limits its applicability because the production of ultraviolet is expensive. At present, the discovery of a photocatalyst of suitable bandgap with visible light or modification of the existing photocatalyst is becoming very attractive for photocatalysis technology. However, the major drawbacks of photocatalysts are the high recombination rate of photogenerated electron-hole pairs, the ultraviolet light activity limitations, and low surface coverage. In this review, the most commonly used synthesis method for metal oxide nanoparticles, photocatalytic applications of metal oxides, and applications and toxicity of different dyes are comprehensively highlighted. In addition, the challenges in the photocatalytic applications of metal oxides, strategies to suppress these challenges, and metal oxide studied by density functional theory for photocatalytic applications are described in detail.

Removal of Pharmaceuticals and Personal Care Products (PPCPs) by Free Radicals in Advanced Oxidation Processes

As emerging pollutants, pharmaceutical and personal care products (PPCPs) have received extensive attention due to their high detection frequency (with concentrations ranging from ng/L to μg/L) and potential risk to aqueous environments and human health. Advanced oxidation processes (AOPs) are effective techniques for the removal of PPCPs from water environments. In AOPs, different types of free radicals (HO·, SO₄·^-, O₂·^-, etc.) are generated to decompose PPCPs into non-toxic and small-molecule compounds, finally leading to the decomposition of PPCPs. This review systematically summarizes the features of various AOPs and the removal of PPCPs by different free radicals. The operation conditions and comprehensive performance of different types of free radicals are summarized, and the reaction mechanisms are further revealed. This review will provide a quick understanding of AOPs for later researchers.

Visible Light-Driven Advanced Oxidation Processes to Remove Emerging Contaminants from Water and Wastewater: a Review

The scientific data review shows that advanced oxidation processes based on the hydroxyl or sulfate radicals are of great interest among the currently conventional water and wastewater treatment methods. Different advanced treatment processes such as photocatalysis, Fenton's reagent, ozonation, and persulfate-based processes were investigated to degrade contaminants of emerging concern (CECs) such as pesticides, personal care products, pharmaceuticals, disinfectants, dyes, and estrogenic substances. This article presents a general overview of visible light-driven advanced oxidation processes for the removal of chlorfenvinphos (organophosphorus insecticide), methylene blue (azo dye), and diclofenac (non-steroidal anti-inflammatory drug). The following visible light-driven treatment methods were reviewed: photocatalysis, sulfate radical oxidation, and photoelectrocatalysis. Visible light, among other sources of energy, is a renewable energy source and an excellent substitute for ultraviolet radiation used in advanced oxidation processes. It creates a high application potential for solar-assisted advanced oxidation processes in water and wastewater technology. Despite numerous publications of advanced oxidation processes (AOPs), more extensive research is needed to investigate the mechanisms of contaminant degradation in the presence of visible light. Therefore, this paper provides an important source of information on the degradation mechanism of emerging contaminants. An important aspect in the work is the analysis of process parameters affecting the degradation process. The initial concentration of CECs, pH, reaction time, and catalyst dosage are discussed and analyzed. Based on a comprehensive survey of previous studies, opportunities for applications of AOPs are presented, highlighting the need for further efforts to address dominant barriers to knowledge acquisition.

Levofloxacin degradation under visible-LED photo-catalyzing by a novel ternary Fe-ZnO/WO3 nanocomposite

As semiconductor photocatalysts showing their efficient redox ability upon illumination, new development of materials to enhance the pollution degradation is gaining popularity, especially on their oxidation ability. In this study, a highly stable ternary Fe-ZnO/WO₃ nanocomposite photocatalyst has been synthesized in order to improve charge transfer of photocatalytic oxidation under 30W LED light (425-470 nm) to efficiency degrade the Levofloxacin (LVF) in the solution. This catalyst was characterized and analyzed by XRD, FE-SEM, HR-TEM, X-ray XPS, UPS, PL, TRPL, LSV, EIS, and Photocurrent. Various important factors for the photodegradation were investigated, including Fe content, initial LVF concentration, catalyst dosage, and solution pH. The optimal conditions were Fe 1.0 wt%, LVF 10 mg L^-1, Fe-ZnO/WO₃ dosage 0.5 g L^-1, and pH 7 for LVF photodegradation up to 96% with a kinetic rate constant of 0.0342 min^-1 and were stable in photodegradation efficiency (90%) after five test cycles. In the visible LED light, the activation bandgap was estimated to be 2.75 eV with high electron-hole pair separation and charge transfer from Fe-ZnO to WO₃ that could enhance the generation of active species of ^•OH. Moreover, the more effective charge separation of Fe-ZnO/WO₃ were confirmed by lower PL intensity and longer charge carrier lifetime. Fe-ZnO/WO₃ also demonstrated the excellent electrochemical properties with high photocurrent and small resistance. For the LVF degradation, 3 possible pathways were proposed with 12 intermediate products. This study demonstrated that the synthesized Fe-ZnO/WO₃ could serve as a reliable visible-light responsive photocatalysts with the potential for degrading antibiotics in solution.

Nanohybrids-assisted photocatalytic removal of pharmaceutical pollutants to abate their toxicological effects - A review

Advancement in medication by health care sector has undoubtedly improved our life but at the same time increased the chemical burden on our natural ecosystem. The residuals of pharmaceutical products become part of wastewater streams by different sources such as excretion after their usage, inappropriate way of their disposal during production etc. Hence, they are serious health hazards for human, animal, and aquatic lives. Due to rapid urbanization, the increased demand for clean drinking water is a burning global issue. In this regard it is need of the present era to explore efficient materials which could act as photocatalyst for mitigation of pharmaceuticals in wastewater. Nanohybrid as photocatalyst is one of the widely explored class of materials in photocatalytic degradation of such harmful pollutants. Among these nanohybrids; metal based nanohybrids (metals/metal oxides) and carbon based nanohybrids (carbon nanotubes, graphene, fullerenes etc.) have been explored to remove pharmaceutical drugs. Keeping in view the increasing harmful impacts of pharmaceuticals; the sources of pharmaceuticals in wastewater, their health risk factors and their mitigation using efficient nanohybrids as photocatalysts have been discussed in this review.

Degradation of diclofenac sodium using Fenton-like technology based on nano-calcium peroxide

A nano-calcium peroxide (nCaO₂) powder with a purity of 89.1% was prepared using an improved traditional method. Then, the as-prepared nCaO₂ was used as the source of hydrogen peroxide (H₂O₂) for the Fenton-like degradation of diclofenac sodium (DCF). The results showed that nCaO₂ performed better for DCF removal when compared to nCaO₂ prepared by a conventional method and commercial calcium peroxide (CaO₂). Further experimental results indicated that 97.5% of DCF could be removed in 180 min at a nCaO₂/Fe²⁺-EDTA/DCF molar ratio of 16/8-8/1, which was more efficient than in the H₂O₂/EDTA-Fe²⁺/DCF and nCaO₂/Fe²⁺/DCF systems. The best removal rate of DCF was at pH 6.0, unlike previous claims that stated that the lower the pH in the buffer system, the better the degradation of DCF. In addition, the influence of water quality parameters, such as Cl^-, NO₃^-, SO₄^2-, HCO₃^-, and humic acid (HA), on DCF removal were evaluated. A free radical masking experiment revealed the existence of hydroxyl radical (OH), superoxide radical (O₂^-) and singlet oxygen (¹O₂), and indicated that the degradation of DCF was mainly due to oxidation caused by OH. Electron paramagnetic resonance (EPR) studies for different systems and different active oxygen species were carried out, and it was further confirmed that OH radicals have high intensity in the Fenton-like system based on nCaO₂. EPR results also showed that the addition of EDTA can promote the production of OH. According to the identification of the dominant reactive species and GC-MS, the possible theoretical DCF degradation pathways were proposed.

Tungsten-Based Catalysts for Environmental Applications

This review aims to give a general overview of the recent use of tungsten-based catalysts for wide environmental applications, with first some useful background information about tungsten oxides. Tungsten oxide materials exhibit suitable behaviors for surface reactions and catalysis such as acidic properties (mainly Brønsted sites), redox and adsorption properties (due to the presence of oxygen vacancies) and a photostimulation response under visible light (2.6–2.8 eV bandgap). Depending on the operating condition of the catalytic process, each of these behaviors is tunable by controlling structure and morphology (e.g., nanoplates, nanosheets, nanorods, nanowires, nanomesh, microflowers, hollow nanospheres) and/or interactions with other compounds such as conductors (carbon), semiconductors or other oxides (e.g., TiO2) and precious metals. WOx particles can be also dispersed on high specific surface area supports. Based on these behaviors, WO3-based catalysts were developed for numerous environmental applications. This review is divided into five main parts: structure of tungsten-based catalysts, acidity of supported tungsten oxide catalysts, WO3 catalysts for DeNOx applications, total oxidation of volatile organic compounds in gas phase and gas sensors and pollutant remediation in liquid phase (photocatalysis).

Eco-friendly synthesis of chromeno[4,3-b]chromenes with a new photosensitized WO3/ZnO@NH2-EY nanocatalyst

A new heterogeneous photoredox nanocatalyst WO₃/ZnO@NH₂-EY (EY: eosin Y) was fabricated and characterized employing some instrumental techniques such as XRD, FT-IR, ICP, TGA, and SEM. The photocatalytic efficiency of the prepared material was investigated in the preparation of various chromeno[4,3-b]chromenes via a simple and practical method. The chromene derivatives were prepared through the condensation of aromatic aldehydes, dimedone, and coumarin under an open-air atmosphere in the presence of a green LED under solventless conditions. The significant advantages of this new method include low reaction time, easy work-up, cost-effective, wide substrate scope, excellent yield, and complete atom economy of the final products. Moreover, the prepared photocatalyst could be frequently recovered up to four times with only a little decrease in the catalytic activity. Furthermore, the progress of the condensation reaction is demonstrated to occur via a radical mechanism, which shows that reactive species such as ˙O₂⁻ and OH˙ together with h⁺ would be involved in the photocatalytic process. Stability and reusability studies also warranty good reproducibility of the nanocatalyst for at least 4 runs. Eventually, a hot filtration test ensured that the nanohybrid catalyst is stable in the reaction medium and its catalytic activity originates from the whole undecomposed conjugated composite.

WO₃/ZnO@NH₂-EY is disclosed in the preparation of chromenes under air in the presence of a green LED. ˙O₂⁻, OH˙, and h⁺ are proposed as reactive species and hot filtration test assured stability and reusability of the nanocatalyst.

Photocatalytic degradation of diclofenac using TiO2-CdS heterojunction catalysts under visible light irradiation

The present study reports the photocatalytic degradation of analgesic drug diclofenac using the hydrothermally prepared TiO₂-CdS heterojunction catalyst. The results suggest that the prepared catalysts exhibited excellent photocatalytic activity under visible light irradiation. The photodegradation kinetics were well fitted to the pseudo-first-order reaction. The apparent reaction rate constant for TC5 catalyst in the diclofenac degradation was 0.02316 min^-1. Mineralisation of diclofenac using TC5 photocatalyst was around 86% within 4 h of irradiation time. The operating parameters such as optimal catalyst dosage, apparent solution pH and the effect of initial diclofenac concentration were also studied using the TC5 catalyst. The role of active species in the degradation mechanism was elucidated and it was found that the hydroxyl radical is the main active species in the diclofenac degradation mechanism. The charge transfer between heterojunction catalysts is facilitated by direct Z-scheme heterojunction structure. The coupled photocatalysts also showed good photochemical stability and reusability over five successive reaction cycles. The tentative degradation pathway has been devised based on LC-MS peaks, and it is found that only m/z 224, m/z 178 and m/z 124 were persisted at the end of the reaction.

F-doped ZnO nano- and meso-crystals with enhanced photocatalytic activity in diclofenac degradation

Diclofenac (DCF), a non-steroidal anti-inflammatory drug, is considered one of the most widespread emerging contaminants. Its incidence in water can favor the growth of drug-resistant bacteria and harm aquatic organisms endangering both the human health and the ecosystem. Advanced oxidation processes (AOPs) based on the action of reactive oxygen species are very effective technologies for the removal of this contaminant from water. In this context, ZnO is one of the most studied semiconductors for photocatalytic water treatment. In this work, the photocatalytic activity of fluorine-doped ZnO nano- and meso-crystals synthesized by a hydrothermal approach is reported, exploring the role of a low F atomic concentration (0.25, 0.5 and 1 at. %) on the degradation of DCF in comparison with bare ZnO. All doped samples show high rates of DCF degradation and mineralization, which were realized primarily thanks to their high efficiency in the generation of hydroxyl radicals (OH). The property-structure-function relationships of the materials are investigated by complementary techniques, such as SEM, XRD, EPR, UV-vis DRS and PL, with the aim to evaluate the role of fluorine in determining their morphological, electronic and optical properties.

Photocatalytic Applications of Metal Oxides for Sustainable Environmental Remediation

Along with industrialization and rapid urbanization, environmental remediation is globally a perpetual concept to deliver a sustainable environment. Various organic and inorganic wastes from industries and domestic homes are released into water systems. These wastes carry contaminants with detrimental effects on the environment. Consequently, there is an urgent need for an appropriate wastewater treatment technology for the effective decontamination of our water systems. One promising approach is employing nanoparticles of metal oxides as photocatalysts for the degradation of these water pollutants. Transition metal oxides and their composites exhibit excellent photocatalytic activities and along show favorable characteristics like non-toxicity and stability that also make them useful in a wide range of applications. This study discusses some characteristics of metal oxides and briefly outlined their various applications. It focuses on the metal oxides TiO2, ZnO, WO3, CuO, and Cu2O, which are the most common and recognized to be cost-effective, stable, efficient, and most of all, environmentally friendly for a sustainable approach for environmental remediation. Meanwhile, this study highlights the photocatalytic activities of these metal oxides, recent developments, challenges, and modifications made on these metal oxides to overcome their limitations and maximize their performance in the photodegradation of pollutants.

Incorporating W cations into ZnO nanosheets: an efficient method towards ZnO/ZnWO4 photocatalysts for highly effective degradation of organic compounds under UV and visible-light irradiation

Novel ZnO/ZnWO₄ photocatalysts were synthesized for the removal of RhB dye with an excellent photocatalytic performance.

Immobilizing a visible light-responsive photocatalyst on a recyclable polymeric composite for floating and suspended applications in water treatment

A visible light responsive TiO2/Ag3PO4 (10 : 1) nanocomposite was prepared and successfully immobilized (12 wt%) in a spherical polymeric matrix consisting of polysulfone and alginate (10 : 6). The resulted beads featured a sponge-like structure with interconnected macrovoids and micropores, and showed high adsorption and visible-light photocatalytic activity towards various wastewater pollutants, including the widely used dye - methylene blue (k = 0.0321 min-1), and two emerging pharmaceutical contaminants - diclofenac (k = 0.018 min-1) and triclosan (k = 0.052 min-1). As determined, the ˙OH radical and h+ are the primary reactive oxygen species responsible for the photodegradation. The composite photocatalytic beads are also effective in bacterial inactivation and degradation of acyl-homoserine lactones (AHLs), the bacterial quorum sensing autoinducers triggering biofilms, thus exhibiting a promising future in wastewater disinfection and biofilm retardation. Additionally, these beads could be used in inter-switchable suspended or buoyant forms, and be effectively regenerated by H2O2 treatment, and used for multiple cycles without any significant loss in photoactivity. With these unique features, the prepared visible-light photocatalytic beads could be easily applied in large-scale water and wastewater treatment systems.

Photocatalytic degradation of acetaminophen and codeine medicines using a novel zeolite-supported TiO2 and ZnO under UV and sunlight irradiation

Pharmaceutical compounds are considered as emerging contaminants in the aquatic environments that are not easily eliminated by conventional treatment processes. In the present study, the photocatalytic oxidation of acetaminophen and codeine medicines under UV and solar irradiation was investigated in the aqueous solutions using a novel synthesized zeolite from stone cutting sludge as a support for TiO₂ and ZnO. The effect of photocatalyst synthesis conditions including catalyst dose, mixing time, calcination time, and temperature on the efficiency of the pharmaceutical removal were optimized using Taguchi process optimization method. The prepared photocatalysts were characterized using X-ray diffractometer, field emission scanning electron microscopy, energy-dispersive X-ray, the BET surface area, and the Fourier transformation infrared. The results indicated that the performance of ZnO-zeolite for the removal of acetaminophen-codeine under UV and solar radiation with 58.7% and 45.7% was better than that of TiO₂-zeolite with 44.3% and 39.2% efficiency, respectively. Removal efficiency under UV and solar radiation was comparable, suggesting that sunlight could be a promising source for treatment of contaminated water by acetaminophen and codeine using photocatalytic degradation. Regeneration of the prepared photocatalysts after 4 cycles revealed a slight decrease in their efficiency. Overall, photocatalytic degradation of the medicines in the water and wastewater using the ZnO-zeolite and TiO₂-zeolite could be developed as an efficient treatment process.