Spatial distribution of calcite and amorphous calcium carbonate in the cuticle of the terrestrial crustaceans Porcellio scaber and Armadillidium vulgare

Exoskeletal Trade-off between Claws and Carapace in Deep-sea Hydrothermal Vent Decapod Crustaceans

Limitations on energetic resources create evolutionary trade-offs, prompting us to investigate if investment in claw strength remains consistent across crustaceans living in diverse habitats. Decapod crustaceans living in deep-sea hydrothermal vents are ideal for this study due to their extreme environment. In this study, we investigated whether decapods (blind crab Austinograea sp. and the squat lobster Munidopsis lauensis) living in deep-sea hydrothermal vents prioritize investing in strong claws compared to the carapace, like coastal decapods. We analyzed exoskeleton morphology, mechanical properties, structures, and elemental composition in both the carapace and claws of four Decapoda species (two each from Brachyura and Anomura infraorders) in vent and coastal habitats. Coastal decapods had ∼4-9 times more teeth on their claw cutting edge than the vent species. Further, only the coastal species exhibited higher firmness in their claws than in their carapaces. Each infraorder controlled exoskeletal hardness differently: Brachyura changed the stacking height of the Bouligand structure, while Anomura regulated magnesium content in the exoskeleton. The vent decapods may prioritize strengthening their carapace over developing robust claws, allocating resources to adapt to the harsh conditions of deep-sea hydrothermal vents. This choice might enhance their survival in the extreme environment, where carapace strength is crucial for protecting internal organs from environmental factors, rather than relying on the powerful claws seen in coastal decapods for a competitive advantage.

Chitin-induced disease resistance in plants: A review

Chitin is composed of N-acetylglucosamine units. Chitin a polysaccharide found in the cell walls of fungi and exoskeletons of insects and crustaceans, can elicit a potent defense response in plants. Through the activation of defense genes, stimulation of defensive compound production, and reinforcement of physical barriers, chitin enhances the plant's ability to defend against pathogens. Chitin-based treatments have shown efficacy against various plant diseases caused by fungal, bacterial, viral, and nematode pathogens, and have been integrated into sustainable agricultural practices. Furthermore, chitin treatments have demonstrated additional benefits, such as promoting plant growth and improving tolerance to abiotic stresses. Further research is necessary to optimize treatment parameters, explore chitin derivatives, and conduct long-term field studies. Continued efforts in these areas will contribute to the development of innovative and sustainable strategies for disease management in agriculture, ultimately leading to improved crop productivity and reduced reliance on chemical pesticides.

Structural diversity of crustacean exoskeletons and its implications for biomimetics

The crustacean cuticle is a biological composite material consisting of chitin-protein fibres in a mineralized matrix. Recent research has revealed a surprising range of fibre architectures and mineral compositions of crustacean skeletal structures adapted to various mechanical demands. It is becoming increasingly clear that the organic fibres in the cuticle may be organized in patterns differing from the standard twisted plywood model. Observed fibre architectures in protruding skeletal structures include longitudinal and circular parallel fibre arrays. Skeletal minerals often include calcium phosphates in addition to calcium carbonates. Furthermore, skeletal properties are affected by protein cross-linking, which replaces mineralization as a stiffening mechanism in some structures. Several common structural motifs, such as the stiffening of the outer skeletal layers, the incorporation of non-mineralized cuticle in exposed structures, and interchanging layers of parallel fibres and the twisted plywood structure, can be identified in skeletal elements with similar functions. These evolutionary solutions have the potential for biomimetic applications, particularly as manufacturing technologies advance. To make use of this potential, we need to understand the processes behind the formation of the crustacean exoskeleton and determine which features are truly adaptive and worth mimicking.

Ligand-Directed Shape Reconfiguration in Inorganic Materials

Polymer elastomers with reversible shape-changing capability have led to significant development of artificial muscles, functional devices, and soft robots. By contrast, reversible shape transformation of inorganic nanoparticles is notoriously challenging due to their relatively rigid lattice structure. Here, the authors demonstrate the synthesis of shape-changing nanoparticles via an asymmetrical surface functionalization process. Various ligands are investigated, revealing the essential role of steric hindrance from the functional groups. By controlling the unbalanced structural hindrance on the surface, the as-prepared clay nanoparticles can transform their shape in a fast, facile, and reversible manner. In addition, such flexible morphology-controlled mechanism provides a platform for developing self-propelled shape-shifting nanocollectors. Owing to the ion-exchanging capability of clay, these self-propelled nanoswimmers (NS) are able to autonomously adsorb rare earth elements with ultralow concentration, indicating the feasibility of using naturally occurring materials for self-powered nanomachine.

The armoured cuticle of the black soldier fly Hermetia illucens

We characterise in detail the larval and pupal cuticle of the black soldier fly Hermetia illucens L. (Diptera: Stratiomyidae), a key insect species in circular economy. In particular, we focus on ultrastructure using scanning and transmission electron microscopy, material characterization and composition (elements and minerals) with confocal laser scanning microscope, energy dispersive X-ray microanalysis, powder X-ray diffraction and mechanical properties with nanoindentation measurements. Calcium carbonate crystallizes on the epicuticle as blocks of calcite in the pupal cuticle. Calcium carbonate granules are stored in two specialised Malpighian tubules. CaCO3 is already present in the cuticle of young larval instars, but it is mainly in the form of amorphous calcium carbonate while the amount of calcite increases during larval development. The presence of calcite leads to cuticle hardening. Larval and pupal cuticles contain large amounts of resilin which guarantee cuticle flexibility.

Organic Controls over Biomineral Ca-Mg Carbonate Compositions and Morphologies

Calcium carbonate minerals, such as aragonite and calcite, are widespread in biomineral skeletons, shells, exoskeletons, and more. With rapidly increasing pCO₂ levels linked to anthropogenic climate change, carbonate minerals face the threat of dissolution, especially in an acidifying ocean. Given the right conditions, Ca-Mg carbonates (especially disordered dolomite and dolomite) are alternative minerals for organisms to utilize, with the added benefit of being harder and more resistant to dissolution. Ca-Mg carbonate also holds greater potential for carbon sequestration due to both Ca and Mg cations being available to bond with the carbonate group (CO₃^2-). However, Mg-bearing carbonates are relatively rare biominerals because the high kinetic energy barrier for the dehydration of the Mg²⁺-water complex severely restricts Mg incorporation in carbonates at Earth surface conditions. This work presents the first overview of the effects of the physiochemical properties of amino acids and chitins on the mineralogy, composition, and morphology of Ca-Mg carbonates in solutions and on solid surfaces. We discovered that acidic, negatively charged, hydrophilic amino acids (aspartic and glutamic) and chitins could induce the precipitation of high-magnesium calcite (HMC) and disordered dolomite in solution and on solid surfaces with these adsorbed biosubstrates via in vitro experiments. Thus, we expect that acidic amino acids and chitins are among the controlling factors in biomineralization used in different combinations to control the mineral phases, compositions, and morphologies of Ca-Mg carbonate biomineral crystals.

Bioinspired Stabilization of Amorphous Calcium Carbonate by Carboxylated Nanocellulose Enables Mechanically Robust, Healable, and Sensing Biocomposites

Nature builds numerous structurally complex composites with fascinating mechanical robustness and functionalities by harnessing biopolymers and amorphous calcium carbonate (ACC). The key to successfully mimicking these natural designs is efficiently stabilizing ACC, but developing highly efficient, biodegradable, biocompatible, and sustainable stabilizing agents remains a grand challenge since anhydrous ACC is inherently unstable toward crystallization in the wet state. Inspired by the stabilized ACC in crustacean cuticles, we report the efficient stabilization ability of the most abundant biopolymer-cellulose nanofibrils (CNFs) for ACC. Through the cooperative stabilizing effect of surface carboxyl groups and a rigid segregated network, the CNFs exhibit long-term stability (more than one month) and achieved a stabilization efficiency of 3.6 and 4.4 times that of carboxymethyl cellulose (CMC) and alginate, respectively, even higher than poly(acrylic acid). The resulting CNF/ACC dispersions can be constructed into transparent composite films with the high strength of 286 MPa and toughness up to 28.5 MJ/m³, which surpass those of the so far reported synthetic biopolymer-calcium carbonate/phosphate composites. The dynamic interfacial interaction between nanocomponents also provides the composite films with good self-healing properties. Owing to their good wet stability, the composite films present high humidity sensitivity for monitoring respiration and finger contact.

Bioinspired Chiral Template Guided Mineralization for Biophotonic Structural Materials

Nature provides numerous biomineral design inspirations for constructing structural materials with desired functionalities. However, large-scale production of damage-tolerant Bouligand structural materials with biologically comparable photonics remains a longstanding challenge. Here, an efficient and scalable artificial molting strategy, based on self-assembly of cellulose nanocrystals and subsequent mineralization of amorphous calcium carbonate, is developed to produce biomimetic materials with an exceptional combination of mechanical and photonic properties that are usually mutually exclusive in synthetic materials. These biomimetic composites exhibit tunable mechanics from "strong and flexible", which exceeds the benchmark of natural chiral materials, to "stiff and hard", which is comparable to natural and synthetic counterparts. Especially, the biomimetic composites possess ultrahigh stiffness of 2 GPa in their fully water-swollen state-a value well beyond hydrated crab exoskeleton, cartilage, tendon, and stiffest synthetic hydrogels, combined with exceptional strength and resilience. Additionally, these composites are distinguished by the tunable chiral structural color and water-triggered switchable photonics that are absent in most artificial mineralized materials, as well as unique hydroplastic properties. This study opens the door for a scalable synthesis of resilient biophotonic structural materials in practical bulk form.

Microstructure, mechanical properties and elemental composition of the terrestrial isopod Armadillidium vulgare cuticle

The exoskeletons of crustaceans are essential for providing protection from predators and other environmental threats. Understanding the structure and mechanical behavior of their natural armor could inspire the design of lightweight and high toughness synthetic materials. Most published work has focused on marine crustacea rather than their terrestrial counterparts, which are exposed to a multitude of unique threats. The interest in the terrestrial isopod Armadillidium vulgare (A. vulgare) has grown but the interrelationship between the microstructure, chemical composition, and mechanical properties has not been thoroughly investigated. Thus, this study aims to elucidate missing details concerning this biological mineralized composite. Exoskeleton specimens were fixated to preserve the intrinsic protein structure. We utilize scanning electron microscopy for microstructure analysis, Raman spectroscopy for elemental analysis, and nanoindentation property mapping to achieve mechanical characterization. The naturally fractured A. vulgare exoskeleton cross-section reveals four subregions with the repeating helicoidal 'Bouligand' arrangement most prominent in the endocuticle. The hardness and reduced modulus distributions exhibit a through-thickness exponential gradient with decreasing magnitudes from the outermost to the innermost layers of the exoskeleton. The Raman spectra show a graded spatial distribution of key constituents such as calcium carbonate across the thickness, some of which are consistent with the mechanical property gradient. Potential microstructure, elemental composition, and mechanical property relationships are discussed to explain how the hierarchical structure of this nanolaminate armor protects this species.

Formation and remodelling of septate junctions in the epidermis of isopod Porcellioscaber during development

Septate junctions (SJs) perform an occluding function in invertebrate epithelia and consist of parallel septa extending across the intercellular space between neighbouring cells. In addition, they are required for several morphogenetic processes in arthropods. The biogenesis of SJs during development is inadequately studied and it was characterised in detail only for various epithelia of Drosophilamelanogaster. This paper provides a detailed analysis of the ultrastructural differentiation of SJs in the epidermis of the terrestrial isopod Porcellioscaber during embryonic and postembryonic development. In this study, mid-stage embryo S13 was the earliest stage in which single septa were observed basally to the adherens junction (AJ). Differentiation of SJs during further development includes gradual elongation of septa arrays and formation of continuous arrays of septa. The enlargement of SJs in the epidermis is most pronounced at the transition from embryonic to postembryonic development and after the release of mancae from the marsupium. SJs of postmarsupial mancae are similar to those of adults, but are not yet as extensive. Comparison of the differentiation of SJs in the epidermis and hindgut of P.scaber, reveals a similar sequence of events. In addition, remodelling of SJs was observed in the epidermis of late marsupial mancae, the stage of cuticle renewal. Common features of SJs' biogenesis in P.scaber and D.melanogaster ectodermal epithelia are indicated.

The epidermis cells of mandible teeth in the terrestrial isopod Porcellio scaber: Differentiations for mineralisation with calcium phosphate and carbonate

Generally, the mineralisation of the crustacean cuticle occurs when the cuticle has expanded after moulting. However, in the partes incisivae of Porcellio scaber, cuticle mineralisation with calcium phosphate already occurs before the moult. We investigated the ultrastructure and distribution of organelles within the epidermis cells and searched for calcium-containing organelles using EDX and EFTEM analysis. We found two different cell types. Calcium carbonate-secreting C-cells, which resemble the epithelial cells of the general integument, and the P-cells, which, as an unusual feature, have cell extensions up to 400 μm long. During secretion of the partes incisivae, these extensions end at the unmineralised tip and the phosphate-containing middle region. Their cell bodies contain most of the mitochondria located in basal folds and a high amount of endoplasmic reticulum. The cell extensions contain many microtubules, endoplasmic reticulum, large and small vesicles and densely stained rod-shaped cisternae. The rod-shaped cisternae and the endoplasmic reticulum contain calcium. During cuticle mineralisation, vesicles, which probably belong to the endo-lysosomal system, contain calcium and phosphorus. They occur at some distance and close to the cuticle. The mineral in these vesicles has a similar composition to that within the cuticle, suggesting that they play a role in cuticle mineralisation.

The dorsal tergite cuticle of Helleria brevicornis: Ultrastructure, mineral distribution, calcite microstructure and texture

Among the terrestrial Crustacea, isopods have most successfully established themselves in a large variety of terrestrial habitats. As in most Crustacea, their cuticle consists of a hierarchically organised organic phase of chitin-protein fibrils, containing calcium carbonate and some calcium phosphate. In previous studies, we examined the tergite cuticle of Tylos europaeus, which lives on seashores and burrows into moist sand. In this study, we investigate the closely related species Helleria brevicornis, which is completely terrestrial and lives in leaf litter and humus and burrows into the soil. To get deeper insights in relation between the structure of the organic and mineral phase in species living in diverse habitats, we have investigated the structure, and the chemical and crystallographic properties of the tergite cuticle using various preparation techniques, and microscopic and analytical methods. The results reveal long and short epicuticular sensilla with brushed tips on the tergite surface that do not occur in T. europaeus. As in T. europaeus a distal exocuticle, which contains a low number of organic fibres, contains calcite while the subjacent layers of the exo- and endocuticle contain amorphous calcium carbonate. The distal exocuticle contains a polygonal pattern of mineral initiation sites that correspond to interprismatic septa described for decapod crabs. The shape and position of calcite units do not follow the polygonal pattern of the septa. The results indicate that the calcite units form by crystallisation from an amorphous phase that progresses from both margins of the septa to the centres of the polygons.

Structure of a hinge joint with textured sliding surfaces in terrestrial isopods (Crustacea: Isopoda: Oniscidea)

BACKGROUND

The study of joints in terrestrial arthropods can provide insights into the evolutionary optimization of contacting surfaces that slide without lubrication. This work reports on the structure of the joint between the propodus and the dactylus in terrestrial isopods, the most successful group of crustaceans on land, focusing on the woodlouse Porcellio scaber.

METHODS

The joints were studied using fluorescence microscopy, 3D reconstruction, scanning electron microscopy and transmission electron microscopy. The obtained results were functionally interpreted using high-speed video recordings by analyzing the use of the joint during locomotion.

RESULTS

In the joint, which allows the dactylus to move in a single plain, a semicircular process on the propodus fits into a groove on the dactylus and guides its movement. The sliding surfaces of the propodal process are textured in the form of parallel epicuticular ridges a few hundred nanometers thick. This texturing is selective: while the less heavily loaded surfaces are textured, the surfaces that support the isopod during standing and walking are smooth. In contrast, the groove on the dactylus is completely smooth. We found a similar surface texture in several other species of terrestrial isopods and one aquatic isopod.

CONCLUSIONS

The selective texturing of the joint may reduce wear by eliminating small particles. This effect of the ridges was confirmed using electron microscopy. The absence of ridges on heavily loaded surfaces may enhance the dissipation of forces in these regions.

Prey acceptance and metabolic specialisations in some Canarian Dysdera spiders

Spiders of the genus Dysdera are peculiar for their preying on terrestrial isopods though the preference for this prey type varies between species. We tested prey acceptance of two isopod and two non-isopod prey in 8 species endemic to the Canary Islands, and analyzed growth and metabolic parameters (growth efficiency; dry mass, lipid and N extraction efficiency; lipid:protein consumption ratio) of 6 of these species when fed either house flies (Musca domestica) or isopods (Porcellio scaber) in the laboratory. The species represented four morphological types (unmodified chelicerae, slightly elongated chelicerae, concave chelicerae, flattened fang), supposedly reflecting different specializations to isopod prey. The results showed reduced relative acceptance of non-isopod and increased acceptance of isopod prey in species groups with specialised morphologies compared to the unmodified species group. All species had similar or lower growth and growth efficiency when feeding on isopods than on flies. Extraction efficiency of dry mass and lipid were higher for flies than for isopods, while extraction efficiency of protein was higher for isopods than for flies. All species also utilized isopod protein equally well, but protein utilization of flies was lower in the presumed specialist compared to generalist species, indicating a possible metabolic trade-off from isopod specialisation. Thus, morphological adaptations were associated with increased behavioural preferences for isopods and reduced metabolic ability to handle 'generalist' prey.

The Impact Behaviour of Crab Carapaces in Relation to Morphology

Brachyuran crab carapaces are protective, impact-resistant exoskeletons with elaborate material microstructures. Though several research efforts have been made to characterise the physical, material and mechanical properties of the crab carapace, there are no studies detailing how crab morphologies might influence impact resistance. The purpose of this paper is to characterise and compare Brachyuran crab carapace morphologies in relation to their impact properties, using opto-digital, experimental and numerical methods. We find that crab carapaces with both extended carapace arc-lengths and deep carapace grooves lose stiffness rapidly under cyclic impact loading, and fail in a brittle manner. Contrarily, carapaces with smaller arc lengths and shallower, more broadly distributed carapace grooves are more effective in dissipating stresses caused by impact throughout the carapace structure. This allows them to retain stiffness for longer, and influences their failure mode, which is ductile (denting), rather than brittle fracture. The findings in this paper provide new bioinspired approaches for the geometrical designs by which means material failure under cyclic impact can be controlled and manipulated.

Intracellular calcium phosphate deposits contribute to transcellular calcium transport within the hepatopancreas of Porcellio scaber

Like in most Crustacea, the cuticle of terrestrial isopods is hardened by a calcareous mineral phase. This rigid cuticle is frequently shed during a process called moulting. To reduce calcium loss, Porcellio scaber eats the shed cuticle, the exuviae, and absorb the calcium from it through large tubular diverticula of the intestine, called the mid gut glands or hepatopancreas. After moulting the absorbed calcium should be transported immediately into the hemolymph from which it is used to rapidly mineralize the new cuticle. This suggests that the hepatopancreas epithelium transports calcium from the lumen to the hemolymph. We used TEM, energy-filtered TEM and electron-probe X-ray microanalysis to analyse the distribution of elevated calcium within the hepatopancreas cells of P. scaber. We used animals in the postmoult stage that have eaten their exuviae and, as a control, those that have not ingested the exuviae. To minimize calcium loss within the samples, we used high pressure frozen and freeze substituted samples and propane-1-3-diol as floatation medium for thin-sectioning. The results reveal intracellular dense deposits containing calcium, phosphorus and oxygen at the apical microvillus membrane, within the cytoplasm, attached to vesicles and to the basolateral membrane, as well as extracellular between cells and the basal lamina. Control animals were devoid of these deposits. The results indicate that calcium from the exuviae is absorbed and transported across the epithelium into the hemolymph. We propose that during transport, intracellular calcium is bound to phosphate avoiding toxic effects of high concentrations of ionized calcium.

Crystalline and amorphous calcium carbonate as structural components of the Calappa granulata exoskeleton

The exoskeleton of crustaceans consists of chitin biopolymers where the embedded inorganic biominerals, mainly CaCO₃, affect strongly its mechanical properties. Raman and Near Edge X-ray Absorption Fine Structure (NEXAFS) spectroscopies and Transmission Electron Microscopy (TEM) are applied to investigate the CaCO₃ structure in various parts of the Calappa granulata crab exoskeleton. The shape of the main Raman peak of CaCO₃ reveals the presence of two phases which are identified as calcite and amorphous calcium carbonate (ACC). The relative concentration of the two phases in various parts of the exoskeleton is determined from the area ratio under the corresponding peaks. The results of the Ca L_3,2-edge NEXAFS analysis are in line with the Raman findings, since the energy separation of peaks that appear in the lower frequency region of the main L₂ and L₃ peaks due to crystal field splitting, is directly related to the percentage of the ACC phase in the total CaCO₃ mineral content. The C K-edge spectra are used for the determination of the extent of calcification of the exoskeleton. Furthermore, dark and bright field TEM images reveal the presence of nanocrystallites with an average size of 20 nm. The structure of the nanocrystallites, as derived from the Selected Area Electron Diffraction patterns, is calcite. The results suggest that ACC plays a structural role in the exoskeleton of Calappa granulata.

Functional adaptations in the tergite cuticle of the desert isopod Hemilepistus reaumuri (Milne-Edwards, 1840)

To survive in its extreme habitat, the cuticle of the burrowing desert isopod Hemilepistus reaumuri requires properties distinct from isopods living in moist or mesic habitats. In particular, the anterior tergites are exposed to high mechanical loads and temperatures when individuals guard the entrance of their burrow. We have, therefore, investigated the architecture, composition, calcite texture and local mechanical properties of the tergite cuticle, with particular emphasis on large anterior cuticle tubercles and differences between the anterior and posterior tergite. Unexpectedly, structure and thickness of the epicuticle resemble those in mesic isopod species. The anterior tergite has a thicker endocuticle and a higher local stiffness than the posterior tergite. Calcite distribution in the cuticle is unusual, because in addition to the exocuticle the endocuticle distally also contains calcite. The calcite consists of a distal layer of dense and highly co-oriented crystal-units, followed proximally by irregularly distributed and, with respect to each other, misoriented calcite crystallites. The calcite layer at the tip of the tubercle is thicker relative to the tubercle slopes, and its crystallites are more misoriented to each other. A steep decrease of local stiffness and hardness is observed within a distal region of the cuticle, likely caused by a successive increase in the ACC/calcite ratio rather than changes in the degree of mineralisation. Comparison of the results with other isopods reveals a much lower ACC/calcite ratio in H. reaumuri and a correlation between the degree of terrestriality of isopod species and the magnesium content of the cuticle.

In vivo characterization of bivalve larval shells: a confocal Raman microscopy study

In vivo confocal Raman microscopy (CRM), polarized light microscopy and Fourier transform infrared spectroscopy (FTIR) were used to determine if a significant amount of amorphous calcium carbonate (ACC) exists within larval shells of Baltic mytilid mussels (Mytilus edulis-like) and whether the amount of ACC varies during larval development. No evidence for ACC was found from the onset of shell deposition at 21 h post-fertilization (hpf) until 48 hpf. Larval Mytilus shells were crystalline from 21 hpf onwards and exhibited CRM and FTIR peaks characteristic of aragonite. Prior to shell deposition at 21 hpf, no evidence for carbonates was observed through in vivo CRM. We further analysed the composition of larval shells in three other bivalve species, Mercenaria mercenaria, Crassostrea gigas and Crassostrea virginica and observed no evidence for ACC, which is in contrast to previous work on the same species. Our findings indicate that larval bivalve shells are composed of crystalline aragonite and we demonstrate that conflicting results are related to sub-optimal measurements and misinterpretation of CRM spectra. Our results demonstrate that the common perception that ACC generally occurs as a stable and abundant precursor during larval bivalve calcification needs to be critically reviewed.

Ultrastructure and cuticle formation of the carapace in the myodocopan ostracod exemplified by Euphilomedes japonica (Crustacea: Ostracoda)

The ultrastructure and formation of the cuticle of a myodocopan ostracod, Euphilomedes japonica, are investigated utilizing scanning and transmission electron microscopy. The outer lamella cuticle consists of four layers; epicuticle, exocuticle, endocuticle, and membranous layer like in the cuticle of other arthropods. The exocuticle and endocuticle are well-calcified and the organic matrix develops within the both cuticles. The outermost layer of new cuticle (epicuticle) is secreted first and the inner layers (exocuticle, endocuticle and membranous layer) are added proximally in the pre-, and postmoult stages. The calcification takes place in the whole area of carapace at the same time together with the synthesis of organic matrix within the endocuticle. This study demonstrates that the ultrastructure and formation of the cuticle in myodocopans are different from those in podocopans, and that the myodocopan carapaces have achieved a structural diversity for adaptation to different lifestyles.

Comparative ultrastructure of cells and cuticle in the anterior chamber and papillate region of Porcellioscaber (Crustacea, Isopoda) hindgut

Isopod hindgut consists of two anatomical and functional parts, the anterior chamber, and the papillate region. This study provides a detailed ultrastructural comparison of epithelial cells in the anterior chamber and the papillate region with focus on cuticle ultrastructure, apical and basal plasma membrane labyrinths, and cell junctions. Na⁺/K⁺-ATPase activity in the hindgut epithelial cells was demonstrated by cytochemical localisation. The main difference in cuticle ultrastructure is in the thickness of epicuticle which is almost as thick as the procuticle in the papillate region and only about one sixth of the thickness of procuticle in the anterior chamber. The apical plasma membrane in both hindgut regions forms an apical plasma membrane labyrinth of cytoplasmic strands and extracellular spaces. In the papillate region the membranous infoldings are deeper and the extracellular spaces are wider. The basal plasma membrane is extensively infolded and associated with numerous mitochondria in the papillate region, while it forms relatively scarce basal infoldings in the anterior chamber. The junctional complex in both hindgut regions consists of adherens and septate junctions. Septate junctions are more extensive in the papillate region. Na⁺/K⁺-ATPase was located mostly in the apical plasma membranes in both hindgut regions. The ultrastructural features of hindgut cuticle are discussed in comparison to exoskeletal cuticle and to cuticles of other arthropod transporting epithelia from the perspective of their mechanical properties and permeability. The morphology of apical and basal plasma membranes and localisation of Na⁺/K⁺-ATPase are compared with other arthropod-transporting epithelia according to different functions of the anterior chamber and the papillate region.

Diversity and evolution of sex determination systems in terrestrial isopods

Sex determination systems are highly variable in many taxa, sometimes even between closely related species. Yet the number and direction of transitions between these systems have seldom been characterized, and the underlying mechanisms are still poorly understood. Here we generated transcriptomes for 19 species of terrestrial isopod crustaceans, many of which are infected by Wolbachia bacterial endosymbionts. Using 88 single-copy orthologous genes, we reconstructed a fully resolved and dated phylogeny of terrestrial isopods. An original approach involving crossings of sex-reversed individuals allowed us to characterize the heterogametic systems of five species (one XY/XX and four ZW/ZZ). Mapping of these and previously known heterogametic systems onto the terrestrial isopod phylogeny revealed between 3 and 13 transitions of sex determination systems during the evolution of these taxa, most frequently from female to male heterogamety. Our results support that WW individuals are viable in many species, suggesting sex chromosomes are at an incipient stage of their evolution. Together, these data are consistent with the hypothesis that nucleo-cytoplasmic conflicts generated by Wolbachia endosymbionts triggered recurrent turnovers of sex determination systems in terrestrial isopods. They further establish terrestrial isopods as a model to study evolutionary transitions in sex determination systems and pave the way to molecularly characterize these systems.

Exoskeletal cuticle of cavernicolous and epigean terrestrial isopods: A review and perspectives

Comparative ultrastructural studies of the integument in terrestrial isopod crustaceans show that specific environmental adaptations of different eco-morphotypes are reflected in cuticle structure. The biphasic molting in isopods is a valuable experimental model for studies of cuticular matrix secretion and degradation in the same animal. The aim of this review is to show structural and functional adaptations of the tergal cuticle in terrestrial isopods inhabiting cave habitats. Exoskeletal cuticle thickness, the number of cuticular layers, epicuticle structure, mineralization, pigmentation and complexity of sensory structures are compared, with greater focus on the well-studied cave trichoniscid Titanethes albus. A large number of thinner cuticular layers in cave isopods compared to fewer thicker cuticular layers in related epigean species of similar body-sizes is explained as a specific adaptation to the cavernicolous life style. The epicuticle structure and composition are compared in relation to their potential waterproofing capacity in different environments. Cuticle mineralization is described from the functional point of view as well as from the aspect of different calcium storage sites and calcium dynamics during the molt cycle. We also discuss the nature and reduction of pigmentation in the cave environment and outline perspectives for future research.

Mineral in skeletal elements of the terrestrial crustacean Porcellio scaber: SRμCT of function related distribution and changes during the moult cycle

Terrestrial isopods moult first the posterior and then the anterior half of the body, allowing for storage and recycling of CaCO₃. We used synchrotron-radiation microtomography to estimate mineral content within skeletal segments in sequential moulting stages of Porcellio scaber. The results suggest that all examined cuticular segments contribute to storage and recycling, however, to varying extents. The mineral within the hepatopancreas after moult suggests an uptake of mineral from the ingested exuviae. The total maximum loss of mineral was 46% for the anterior and 43% for the posterior cuticle. The time course of resorption of mineral and mineralisation of the new cuticle suggests storage and recycling of mineral in the posterior and anterior cuticle. The mineral in the anterior pereiopods decreases by 25% only. P. scaber has long legs and can run fast; therefore, a less mineralised and thus lightweight cuticle in pereiopods likely serves to lower energy consumption during escape behaviour. Differential demineralisation occurs in the head cuticle, in which the cornea of the complex eyes remains completely mineralised. The partes incisivae of the mandibles are mineralised before the old cuticle is demineralised and shed. Probably, this enables the animal to ingest the old exuviae after each half moult.

Cuticle morphogenesis in crustacean embryonic and postembryonic stages

The crustacean cuticle is a chitin-based extracellular matrix, produced in general by epidermal cells and ectodermally derived epithelial cells of the digestive tract. Cuticle morphogenesis is an integrative part of embryonic and postembryonic development and it was studied in several groups of crustaceans, but mainly with a focus on one selected aspect of morphogenesis. Early studies were focused mainly on in vivo or histological observations of embryonic or larval molt cycles and more recently, some ultrastructural studies of the cuticle differentiation during development were performed. The aim of this paper is to review data on exoskeletal and gut cuticle formation during embryonic and postembryonic development in crustaceans, obtained in different developmental stages of different species and to bring together and discuss different aspects of cuticle morphogenesis, namely data on the morphology, ultrastructure, composition, connections to muscles and molt cycles in relation to cuticle differentiation. Based on the comparative evaluation of microscopic analyses of cuticle in crustacean embryonic and postembryonic stages, common principles of cuticle morphogenesis during development are discussed. Additional studies are suggested to further clarify this topic and to connect the new knowledge to related fields.

High-resolution structural and elemental analyses of calcium storage structures synthesized by the noble crayfish Astacus astacus

During premolt, crayfish develop deposits of calcium ions, called gastroliths, in their stomach wall. The stored calcium is used for the calcification of parts of the skeleton regularly renewed for allowing growth. Structural and molecular analyses of gastroliths have been primarily performed on three crayfish species, Orconectes virilis, Procambarus clarkii, and more recently, Cherax quadricarinatus. We have performed high-resolution analyses of gastroliths from the native noble crayfish, Astacus astacus, focusing on the microstructure, the mineralogical and elemental composition and distribution in a comparative perspective. Field emission scanning electron microscopy (FESEM) and atomic force microscopy (AFM) observations showed a classical layered microstructure composed of 200-nm diameter granules aligned along fibers. These granules are themselves composed of agglomerated nanogranules of 50nm-mean diameters. Denser regions of bigger fused granules are also present. Micro-Raman spectroscopy show that if A. astacus gastroliths, similarly to the other analyzed gastroliths, are mainly composed of amorphous calcium carbonate (ACC), they are also rich in amorphous calcium phosphate (ACP). The presence of a carotenoid pigment is also observed in A. astacus gastrolith contrary to C. quadricarinatus. Energy-dispersive X-ray spectroscopy (EDX) analyses demonstrate the presence of minor elements such as Mg, Sr, Si and P. The distribution of this last element is particularly heterogeneous. X-ray absorption near edge structure spectroscopy (XANES) reveals an alternation of layers more or less rich in phosphorus evidenced in the mineral phase as well as in the organic matrix in different molecular forms. Putative functions of the different P-comprising molecules are discussed.

Functional adaptation of crustacean exoskeletal elements through structural and compositional diversity: a combined experimental and theoretical study

The crustacean cuticle is a composite material that covers the whole animal and forms the continuous exoskeleton. Nano-fibers composed of chitin and protein molecules form most of the organic matrix of the cuticle that, at the macroscale, is organized in up to eight hierarchical levels. At least two of them, the exo- and endocuticle, contain a mineral phase of mainly Mg-calcite, amorphous calcium carbonate and phosphate. The high number of hierarchical levels and the compositional diversity provide a high degree of freedom for varying the physical, in particular mechanical, properties of the material. This makes the cuticle a versatile material ideally suited to form a variety of skeletal elements that are adapted to different functions and the eco-physiological strains of individual species. This review presents our recent analytical, experimental and theoretical studies on the cuticle, summarising at which hierarchical levels structure and composition are modified to achieve the required physical properties. We describe our multi-scale hierarchical modeling approach based on the results from these studies, aiming at systematically predicting the structure-composition-property relations of cuticle composites from the molecular level to the macro-scale. This modeling approach provides a tool to facilitate the development of optimized biomimetic materials within a knowledge-based design approach.

The structure and dynamics of chitin nanofibrils in an aqueous environment revealed by molecular dynamics simulations

The structure–property relations reveal the typical size of chitin nanofibrils observed in natural systems.

Natural Composite Systems for Bioinspired Materials

From a relatively limited selection of base materials, nature has steered the development of truly remarkable materials. The simplest and often overlooked organisms have demonstrated the ability to manufacture multi-faceted, molecular-level hierarchical structures that combine mechanical properties rarely seen in synthetic materials. Indeed, these natural composite systems, composed of an array of intricately arranged and functionally relevant organic and inorganic substances serve as inspiration for materials design. A better understanding of these composite systems, specifically at the interface of the hetero-assemblies, would encourage faster development of environmentally friendly "green" materials with molecular level specificities.

Formation of the hindgut cuticular lining during embryonic development of Porcellioscaber (Crustacea, Isopoda)

The hindgut and foregut in terrestrial isopod crustaceans are ectodermal parts of the digestive system and are lined by cuticle, an apical extracellular matrix secreted by epithelial cells. Morphogenesis of the digestive system was reported in previous studies, but differentiation of the gut cuticle was not followed in detail. This study is focused on ultrastructural analyses of hindgut apical matrices and cuticle in selected intramarsupial developmental stages of the terrestrial isopod Porcellioscaber in comparison to adult animals to obtain data on the hindgut cuticular lining differentiation. Our results show that in late embryos of stages 16 and 18 the apical matrix in the hindgut consists of loose material overlaid by a thin intensely ruffled electron dense lamina facing the lumen. The ultrastructural resemblance to the embryonic epidermal matrices described in several arthropods suggests a common principle in chitinous matrix differentiation. The hindgut matrix in the prehatching embryo of stage 19 shows characteristics of the hindgut cuticle, specifically alignment to the apical epithelial surface and a prominent electron dense layer of epicuticle. In the preceding embryonic stage – stage 18 – an electron dense lamina, closely apposed to the apical cell membrane, is evident and is considered as the first epicuticle formation. In marsupial mancae the advanced features of the hindgut cuticle and epithelium are evident: a more prominent epicuticular layer, formation of cuticular spines and an extensive apical labyrinth. In comparison to the hindgut cuticle of adults, the hindgut cuticle of marsupial manca and in particular the electron dense epicuticular layer are much thinner and the difference between cuticle architecture in the anterior chamber and in the papillate region is not yet distinguishable. Differences from the hindgut cuticle in adults imply not fully developed structure and function of the hindgut cuticle in marsupial manca, possibly related also to different environments, as mancae develop in marsupial fluid. Bacteria, evenly distributed within the homogenous electron dense material in the hindgut lumen, were observed only in one specimen of early marsupial manca. The morphological features of gut cuticle renewal are evident in the late marsupial mancae, and are similar to those observed in the exoskeleton.

Exoskeletal cuticle differentiation during intramarsupial development of Porcellio scaber (Crustacea: Isopoda)

Exoskeletal crustacean cuticle is a calcified apical extracellular matrix of epidermal cells, illustrating the chitin-based organic scaffold for biomineralization. Studies of cuticle formation during molting reveal significant dynamics and complexity of the assembly processes, while cuticle formation during embryogenesis is poorly investigated. This study reveals in the terrestrial isopod Porcellio scaber, the ultrastructural organization of the differentiating precuticular matrices and exoskeletal cuticles during embryonic and larval intramarsupial development. The composition of the epidermal matrices was obtained by WGA lectin labelling and EDXS analysis. At least two precuticular matrices, consisting of loosely arranged material with overlying electron dense lamina, are secreted by the epidermis in the mid-stage embryo. The prehatching embryo is the earliest developmental stage with a cuticular matrix consisting of an epicuticle and a procuticle, displaying WGA binding and forming cuticular scales. In newly hatched marsupial larva manca, a new cuticle is formed and calcium sequestration in the cuticle is evident. Progression of larval development leads to the cuticle thickening, structural differentiation of cuticular layers and prominent cuticle calcification. Morphological characteristics of exoskeleton renewal in marsupial manca are described. Elaborated cuticle in marsupial larvae indicates the importance of the exoskeleton in protection and support of the larval body in the marsupium and during the release of larvae in the external environment.

Sorption on eggshell waste--a review on ultrastructure, biomineralization and other applications

The structure, adsorption behavior and applications of eggshell waste materials have been reviewed. The ultrastructure of eggshell particles has been discussed to understand the pore structure as well as the surface geometry of the materials leading to its multifarious applicability. Besides, the ultrastructure studies give full information regarding the chemical constituents of egghell particles as well as eggshell membranes. The process of biomineralization in living organisms, their consequent effect of controlling the formation of inorganic-organic composites propelling their application in biomimetic designing of advanced composites with optimized novel properties leading to advances in materials design have been discussed. Utilization of eggshell waste materials for the removal of organic dyes and heavy inorganic ions has been reviewed with suitable models for understanding their adsorption quality and capacity. The applications of these materials in various fields of research have been extensively discussed.

Mineral deposition in bacteria-filled and bacteria-free calcium bodies in the crustacean Hyloniscus riparius (Isopoda: Oniscidea)

Crustacean calcium bodies are epithelial sacs which contain a mineralized matrix. The objectives of this study were to describe the microscopic anatomy of calcium bodies in the terrestrial isopod Hyloniscus riparius and to establish whether they undergo molt-related structural changes. We performed 3D reconstruction of the calcium bodies from paraffin sections and analyzed their structure with light and electron microscopy. In addition, we analyzed the chemical composition of their mineralized matrices with micro-Raman spectroscopy. Two pairs of these organs are present in H. riparius. One pair is filled with bacteria while the other pair is not. In non-molting animals, the bacteria-filled calcium bodies contain apatite crystals and the bacteria-free calcium bodies enclose CaCO₃-containing concretions with little organic matrix. During preparation for molt, an additional matrix layer is deposited in both pairs of calcium bodies. In the bacteria-filled calcium bodies it contains a mixture of calcium carbonate and calcium phosphate, whereas only calcium carbonate is present in bacteria-free calcium bodies. After ecdysis, all mineral components in bacteria-free calcium bodies and the additional matrix layer in bacteria-filled calcium bodies are completely resorbed. During calcium resorption, the apical surface of the calcium body epithelium is deeply folded and electron dense granules are present in spaces between epithelial cells. Our results indicate that the presence of bacteria might be linked to calcium phosphate mineralization. Calcium bodies likely provide a source of calcium and potentially phosphate for the mineralization of the new cuticle after molt. Unlike other terrestrial isopods, H. riparius does not form sternal CaCO₃ deposits and the bacteria-free calcium bodies might functionally replace them in this species.