Fe-based MOFs for photocatalytic N2 reduction: Key role of transition metal iron in nitrogen activation

Molecular Engineering of Metal-Organic Frameworks for Boosting Photocatalytic Hydrogen Peroxide Production

The development of novel metal-organic frameworks (MOFs) as efficient photocatalysts for hydrogen peroxide production from water and oxygen is particularly interesting, yet remains a challenge. Herein, we have prepared four cyclic trinuclear units (CTUs) based MOFs, exhibiting good light absorption ability and suitable band gaps for photosynthesis of H2O2. However, Cu-CTU-based MOFs are not able to photocatalyzed the formation of H2O2, while the alteration of metal nodes from Cu-CTU to Ag-CTU dramatically enhances the photocatalytic performance for H2O2 production and the production rates can reach as high as 17476 μmol g-1 h-1 with an apparent quantum yield of 4.72 %, at 420 nm, which is much higher than most reported MOFs. The photocatalytic mechanism is comprehensively studied by combining the isotope labeling experiments and DFT calculation. This study provides new insights into the preparation of MOF photocatalysts with high activity for H2O2 production through molecular engineering.

Efficient photocatalytic nitrogen fixation via oxygen vacancies in Zr-MOFs at ambient conditions

Photocatalytic nitrogen fixation is seen to be a potential technology for nitrogen reduction due to its eco-friendliness, low energy consumption, and environmental protection. In this study, photocatalysts with abundant oxygen vacancies (Zr-naphthalene dicarboxylic acid (Zr-NDC) and Zr-phthalic acid (Zr-BDC)) were designed using 1,4-naphthalene dicarboxylic acid (H2NDC) and 1,4-phthalic acid (H2BDC) as ligands. Since the structure of H2NDC includes one extra benzene ring than H2BDC, the charge density differential of the organic ligand is probably altered. The hypothesis is proved by density function theory (DFT) calculation. The abundant oxygen vacancies of the catalyst offer numerous active sites for nitrogen fixation. Concurrently, the process of ligand-metal charge transfer facilitates photo-electron transfer, creating an active center for nitrogen reduction. Additionally, the functionalization of ligand amplifies another pathway for charge transfer, broadening the light absorption range of Metal-organic framework (MOF) and increasing its capacity for nitrogen reduction. In contrast to H2BDC, the benzene ring added in H2NDC structure acts as an electron energy storage tank with a stronger electron density difference favorable for photogenerated electron-hole separation resulting in higher photocatalytic activity in Zr-NDC. The experimental results show that the nitrogen fixation efficiency of Zr-NDC is 163.7 µmol g-1h-1, which is significantly better than that of Zr-BDC (29.3 µmol g-1h-1). This work utilizes cost-effective and non-toxic ingredients to design highly efficient photocatalysts, thereby significantly contributing to the practical implementation of green chemistry principles.

Tunable optical properties of isoreticular UiO-67 MOFs for photocatalysis: a theoretical study

A theoretical study of the reported photocatalytic systems based on Zr-based MOF (UiO-67) with biphenyl-4,4'-dicarboxylic acid (bpdc) and 2,2'-bipyridine-5,5'-dicarboxylic acid (bpydc) as linkers was performed. Quantum chemical calculations were carried out to understand the optical properties of the materials and to facilitate the rational design of new UiO-67 derivatives with potentially improved features as photocatalysts under ambient conditions. Hence, the effect of the structural modifications on the optical properties was studied considering different designs based on the nature of the linkers: in 1 only the bpdc linker was considered, or the mixture 1 : 1 between bpdc and bpydc linkers (labeled as 1A). Also, substituents R, -NH2, and -SH, were included in the 1A MOF only over the bpdc linker (labeled as 1A-bpdc-R) and on both bpdc and bpydc linkers (labeled as 1A-R). Thus a family of six isoreticular UiO-67 derivatives was theoretically characterized using Density Functional Theory (DFT) calculations on the ground singlet (S0) and first excited states (singlet and triplet) using Time-Dependent Density Functional Theory (TD-DFT), multiconfigurational post-Hartree-Fock method via Complete Active Space Self-Consistent Field (CASSCF). In addition, the use of periodic DFT calculations suggest that the energy transfer (ET) channel between bpdc and bpydc linkers might generate more luminescence quenching of 1A when compare to 1. Besides, the results suggest that the 1A-R (R: -SH and NH2) can be used under ambient conditions; however, the ET exhibited by 1A, cannot take place in the same magnitude in these systems. These ET can favor the photocatalytic reduction of a potential metal ion, that can coordinate with the bpydc ligand, via LMCT transition. Consequently, the MOF might be photocatalytically active against molecules of interest (such as H2, N2, CO2, among others) with photo-reduced metal ions. These theoretical results serve as a useful tool to guide experimental efforts in the design of new photocatalytic MOF-based systems.

Modelling Photocatalytic N2 Reduction to Ammonia: Where We Stand and Where We Are Going

Artificial ammonia synthesis via the Haber-Bosch process is environmentally problematic due to the high energy consumption and corresponding CO2 ${_2 }$ emissions, produced during the reaction and before hand in hydrogen production upon methane steam reforming. Photocatalytic nitrogen fixation as a greener alternative to the conventional Haber-Bosch process enables us to perform nitrogen reduction reaction (NRR) under mild conditions, harnessing light as the energy source. Herein, we systematically review first-principles calculations used to determine the electronic/optical properties of photocatalysts, N2 adsorption and to expound possible NRR mechanisms. The most commonly studied photocatalysts for nitrogen fixation are usually modified with dopants, defects, co-catalysts and Z-scheme heterojunctions to prevent charge carrier recombination, improve charge separation efficiency and adjust a band gap to for utilizing a broader light spectrum. Most studies at the atomistic level of modeling are grounded upon density functional theory (DFT) calculations, wholly foregoing excitation effects paramount in photocatalysis. Hence, there is a dire need to consider methods beyond DFT to study the excited state properties more accurately. Furthermore, a few studies have been examined, which include higher level kinetics and macroscale simulations. Ultimately, we show there is still ample room for improvement with regard to first principles calculations and their integration in multiscale models.

Application of Fe-MOFs in Photodegradation and Removal of Air and Water Pollutants: A Review

Photocatalytic technology has received increasing attention in recent years. A pivotal facet of photocatalytic technology lies in the development of photocatalysts. Porous metal-organic framework (MOF) materials, distinguished by their unique properties and structural characteristics, have emerged as a focal point of research in the field, finding widespread application in the photo-treatment and conversion of various substances. Fe-based MOFs have attained particular prominence. This review explores recent advances in the photocatalytic degradation of aqueous and gaseous substances. Furthermore, it delves into the interaction between the active sites of Fe-MOFs and pollutants, offering deeper insights into their mechanism of action. Fe-MOFs, as photocatalysts, predominantly facilitate pollutant removal through redox processes, interaction with acid sites, the formation of complexes with composite metal elements, binding to unsaturated metal ligands (CUSs), and hydrogen bonding to modulate their respiratory behavior. This review also highlights the focal points of future research, elucidating the challenges and opportunities that lie ahead in harnessing the characteristics and advantages of Fe-MOF composite catalysts. In essence, this review provides a comprehensive summary of research progress on Fe-MOF-based catalysts, aiming to serve as a guiding reference for other catalytic processes.

Metal-Organic Framework Materials for Production and Distribution of Ammonia

The efficient production of ammonia (NH₃) from dinitrogen (N₂) and water (H₂O) using renewable energy is an important step on the roadmap to the ammonia economy. The productivity of this conversion hinges on the design and development of new active catalysts. In the wide scope of materials that have been examined as catalysts for the photo- and electro-driven reduction of N₂ to NH₃, functional metal-organic framework (MOF) catalysts exhibit unique properties and appealing features. By elucidating their structural and spectroscopic properties and linking this to the observed activity of MOF-based catalysts, valuable information can be gathered to inspire new generations of advanced catalysts to produce green NH₃. NH₃ is also a surrogate for the hydrogen (H₂) economy, and the potential application of MOFs for the practical and effective capture, safe storage, and transport of NH₃ is also discussed. This Perspective analyzes the contribution that MOFs can make toward the ammonia economy.

High-Performance Photocatalytic Reduction of Nitrogen to Ammonia Driven by Oxygen Vacancy and Ferroelectric Polarization Field of SrBi4 Ti4 O15 Nanosheets

Photo-responsive semiconductors can facilitate nitrogen activation and ammonia production, but the high recombination rate of photogenerated carriers represents a significant barrier. Ferroelectric photocatalysts show great promise in overcoming this challenge. Herein, by adopting a low-temperature hydrothermal procedure with varying concentrations of glyoxal as the reducing agent, oxygen vacancies (Vo) are effectively produced on the surface of ferroelectric SrBi₄ Ti₄ O₁₅ (SBTO) nanosheets, which leads to a considerable increase in photocatalytic activity toward nitrogen fixation under simulated solar light with an ammonia production rate of 53.41 µmol g^-1 h^-1 , without the need of sacrificial agents or photosensitizers. This is ascribed to oxygen vacancies that markedly enhance the self-polarization and internal electric field of ferroelectric SBTO, and hence, facilitate the separation of photogenerated charge carriers and light trapping as well as N₂ adsorption and activation, as compared to pristine SBTO. Consistent results are obtained in theoretical studies. Results from this study highlight the significance of surface oxygen vacancies in enhancing the performance of photocatalytic nitrogen fixation by ferroelectric catalysts.

Metal-Organic Framework-Based Photocatalysis for Solar Fuel Production

Metal-organic frameworks (MOFs) represent a novel class of crystalline inorganic-organic hybrid materials with tunable semiconducting behavior. MOFs have potential for application in photocatalysis to produce sustainable solar fuels, owing to their unique structural advantages (such as clarity and modifiability) that can facilitate a deeper understanding of the structure-activity relationship in photocatalysis. This review takes the photocatalytic active sites as a particular perspective, summarizing the progress of MOF-based photocatalysis for solar fuel production; mainly including three categories of solar-chemical conversions, photocatalytic water splitting to hydrogen fuel, photocatalytic carbon dioxide reduction to hydrocarbon fuels, and photocatalytic nitrogen fixation to high-energy fuel carriers such as ammonia. This review focuses on the types of active sites in MOF-based photocatalysts and discusses their enhanced activity based on the well-defined structure of MOFs, offering deep insights into MOF-based photocatalysis.

Advances in Titanium Carbide (Ti3C2T x ) MXenes and Their Metal-Organic Framework (MOF)-Based Nanotextures for Solar Energy Applications: A Review

Introducing new materials with low cost and superior solar harvesting efficiency requires urgent attention to solve energy and environmental challenges. Titanium carbide (Ti₃C₂T _x ) MXene, a 2D layered material, is a promising solution to solve the issues of existing materials due to their promising conductivity with low cost to function as a cocatalyst/support. On the other hand, metal-organic frameworks (MOFs) are emerging materials due to their high surface area and semiconducting characteristics. Therefore, coupling them would be promising to form composites with higher solar harvesting efficiency. Thus, the main objective of this work to disclose recent development in Ti₃C₂T _x -based MOF nanocomposites for energy conversion applications to produce renewable fuels. MOFs can generate photoinduced electron/hole pairs, followed by transfer of electrons to MXenes through Schottky junctions for photoredox reactions. Currently, the principles, fundamentals, and mechanism of photocatalytic systems with construction of Schottky junctions are critically discussed. Then the basics of MOFs are discussed thoroughly in terms of their physical properties, morphologies, optical properties, and derivatives. The synthesis of Ti₃C₂T _x MXenes and their composites with the formation of surface functionals is systematically illustrated. Next, critical discussions are conducted on design considerations and strategies to engineer the morphology of Ti₃C₂T _x MXenes and MOFs. The interfacial/heterojunction modification strategies of Ti₃C₂T _x MXenes and MOFs are then deeply discussed to understand the roles of both materials. Following that, the applications of MXene-mediated MOF nanotextures in view of CO₂ reduction and water splitting for solar fuel production are critically analyzed. Finally, the challenges and a perspective toward the future research of MXene-based MOF composites are disclosed.

Achievements and Perspectives in Metal–Organic Framework-Based Materials for Photocatalytic Nitrogen Reduction

Metal–organic frameworks (MOFs) are coordination polymers with high porosity that are constructed from molecular engineering. Constructing MOFs as photocatalysts for the reduction of nitrogen to ammonia is a newly emerging but fast-growing field, owing to MOFs’ large pore volumes, adjustable pore sizes, controllable structures, wide light harvesting ranges, and high densities of exposed catalytic sites. They are also growing in popularity because of the pristine MOFs that can easily be transformed into advanced composites and derivatives, with enhanced catalytic performance. In this review, we firstly summarized and compared the ammonia detection methods and the synthetic methods of MOF-based materials. Then we highlighted the recent achievements in state-of-the-art MOF-based materials for photocatalytic nitrogen fixation. Finally, the summary and perspectives of MOF-based materials for photocatalytic nitrogen fixation were presented. This review aims to provide up-to-date developments in MOF-based materials for nitrogen fixation that are beneficial to researchers who are interested or involved in this field.

Keggin-type SiW12 encapsulated in MIL-101(Cr) as efficient heterogeneous photocatalysts for nitrogen fixation reaction

The incorporation of polyoxometalates (POMs) in metal-organic frameworks (MOFs) with host-guest structure have proven to be effective strategy to rational design of heterogeneous catalysis. In this study, the Keggin-type POM@MIL-101(Cr) composite catalysts (PMo₁₂, PW₁₂ and SiW₁₂) are synthesized for nitrogen fixation reaction without sacrificial agents at room temperature in the first time. The SiW₁₂ molecules are encapsulated in smaller cavities of MIL-101(Cr) by solvothermal method and in larger cavities by impregnation method, respectively. Solvothermal synthesized catalyst has a performance of 75.56 μmol·h^-1·g^-1_cat and TOF value of 1.95 h^-1, which are about 10 and 88 times than that of Na₄SiW₁₂O₄₀. The excellent performance is ascribed to the synergistic effect of SiW₁₂ and MIL-101(Cr). The MIL-101(Cr) adsorbs a large amount of N₂ and generates sufficiently photogenerated electrons under sunlight irradiation, and electrons quickly transfer to the SiW₁₂ through hydrogen bonds. Moreover, the agglomeration effect of the homogeneous catalyst SiW₁₂ is weakened due to encapsulation with more exposed active sites. This work provides a feasible route to design and synthesize nanocomposite materials with exceptional performance for photocatalytic nitrogen fixation.

Dehydrated UiO-66(SH)2 : The Zr-O Cluster and Its Photocatalytic Role Mimicking the Biological Nitrogen Fixation

This work reports the dehydrated Zr-based MOF UiO-66(SH)₂ as a visible-light-driven photocatalyst to mimic the biological N₂ fixation process. The ¹⁵ N₂ and other control experiments demonstrated that the new photocatalyst is highly efficient in converting N₂ to ammonia. In-situ TGA, XPS, and EXAFS as well as first-principles simulations were used to demonstrate the role of the thermal treatment and the changes of the local structures around Zr due to the dehydration. It was shown that the dehydration opened a gate for the entry of N₂ molecules into the [Zr₆ O₆ ] cluster where the strong N≡N bond was broken stepwise by μ-N-Zr type interactions driven by the photoelectrons aided by the protonation. This mechanism was discussed in comparison with the Lowe-Thorneley mechanism proposed for the MoFe nitrogenase, and with emphasis on the [Zr₆ O₆ ] cluster effect and the leading role of photoelectrons over the protonation. The results shed new light on understanding the catalytic mechanism of biological N₂ fixation and open a new way to fix N₂ under mild conditions.

Interstitial Water Improves Structural Stability of Iron Hexacyanoferrate for High-Performance Sodium-Ion Batteries

Prussian blue analogues (PBAs) are considered one of the promising cathodes for sodium-ion batteries because of their low cost and tunable structure. As an intrinsic characteristic, the influence of structured water in PBAs on the electrochemical properties is still controversial. Herein, low-vacancy iron hexacyanoferrate with different interstitial water contents is synthesized through the citric acid-assisted single iron source method. Ex situ Fourier transform infrared and X-ray diffraction characterization reveals that the interstitial water can stably exist in the Prussian blue framework during repeated cycling. The long-standing interstitial water can reduce the volume change during the Na⁺ insertion/extraction process, resulting in improved cycling stability. Thanks to the low Fe(CN)₆^4- vacancies and pillar role of interstitial water in the crystal framework, the HW-PB exhibits a high reversible capacity of 117 mAh g^-1 and excellent long cycle performance with a capacity retention of 91% after 1380 cycles. This work broadens the understanding of the relationship between the interstitial water in PBAs and Na-storage performances, providing guidance for the precise synthesis of high-quality PBAs.

A minireview on catalysts for photocatalytic N2 fixation to synthesize ammonia

Ammonia (NH3) is an important feedstock in chemical industry. Nowadays NH3 is mainly produced via the industrialized Haber-Bosch process, which requires substantial energy input, since it operates at high temperatures (400-650 °C) and high pressures (20-40 Mpa). From the energy conservation point of view, it is of great significance to explore an alternative avenue to synthesize NH3, which is in line with the concept of sustainable development. Very recently, photocatalytic N2 fixation (PNF) has been discovered as a safe and green approach to synthesize NH3, as it utilizes the inexhaustible solar energy and the abundant N2 in nature to synthesize NH3 under mild conditions. A highly efficient catalyst is the core of PNF. Up to now, extensive studies have been conducted to design efficient catalysts for PNF. Summarizing the catalysts reported for PNF and unraveling their reaction mechanisms could provide guidance for the design of better catalysts. In this review, we will illustrate the development of catalysts for PNF, including semiconductors, plasmonic metal-based catalysts, iron-based catalysts, ruthenium-based catalysts and several other catalysts, point out the remaining challenges and outline the future opportunities, with the aim to contribute to the development of PNF.

Tunable Band Gaps in MUV-10(M): A Family of Photoredox-Active MOFs with Earth-Abundant Open Metal Sites

Titanium-based metal-organic frameworks (Ti-MOFs) have attracted intense research attention because they can store charges in the form of Ti³⁺ and they serve as photosensitizers to cocatalysts through heterogeneous photoredox reactions at the MOF-liquid interface. Both the charge storage and charge transfer depend on the redox potentials of the MOF and the molecular substrate, but the factors controlling these energetic aspects are not well understood. Additionally, photocatalysis involving Ti-MOFs relies on cocatalysts rather than the intrinsic Ti reactivity, in part because Ti-MOFs with open metal sites are rare. Here, we report that the class of Ti-MOFs known as MUV-10 can be synthetically modified to include a range of redox-inactive ions with flexible coordination environments that control the energies of the photoactive orbitals. Lewis acidic cations installed in the MOF cluster (Cd²⁺, Sr²⁺, and Ba²⁺) or introduced to the pores (H⁺, Li⁺, Na⁺, K⁺) tune the electronic structure and band gaps of the MOFs. Through the use of optical redox indicators, we report the first direct measurement of the Fermi levels (redox potentials) of photoexcited MOFs in situ. Taken together, these results explain the ability of Ti-MOFs to store charges and provide design principles for achieving heterogeneous photoredox chemistry with electrostatic control.

Atomically Dispersed Iron Metal Site in a Porphyrin-Based Metal-Organic Framework for Photocatalytic Nitrogen Fixation

The rational design of photocatalysts for efficient nitrogen (N₂) fixation at ambient conditions is important for revolutionizing ammonia production and quite challenging because the great difficulty lies in the adsorption and activation of the inert N₂. Inspired by a biological molecule, chlorophyll, featuring a porphyrin structure as the photosensitizer and enzyme nitrogenase featuring an iron (Fe) atom as a favorable binding site for N₂via π-backbonding, here we developed a porphyrin-based metal-organic framework (PMOF) with Fe as the active center as an artificial photocatalyst for N₂ reduction reaction (NRR) under ambient conditions. The PMOF features aluminum (Al) as metal node imparting high stability and Fe incorporated and atomically dispersed by residing at each porphyrin ring promoting the adsorption and the activation of N₂, termed Al-PMOF(Fe). Compared with the pristine Al-PMOF, Al-PMOF(Fe) exhibits a substantial enhancement in NH₃ yield (635 μg g^-1_cat.) and production rate (127 μg h^-1 g^-1_cat.) of 82% and 50%, respectively, on par with the best-performing MOF-based NRR catalysts. Three cycles of photocatalytic NRR experimental results corroborate a stable photocatalytic activity of Al-PMOF(Fe). The combined experimental and theoretical results reveal that the Fe-N site in Al-PMOF(Fe) is the active photocatalytic center that can mitigate the difficulty of the rate-determining step in photocatalytic NRR. The possible reaction pathways of NRR on Al-PMOF(Fe) were established. Our study of porphyrin-based MOF for the photocatalytic NRR will provide insight into the rational design of catalysts for artificial photosynthesis.

Application of sand particles modified with NH2-MIL-101(Fe) as an efficient visible-light photocatalyst for Cr(VI) reduction

This study presented chemical immobilization of an iron(III)-based metal-organic framework [NH₂-MIL-101(Fe)] on the surface of sand particles and its application for Cr(VI) photocatalytic reduction using visible light. The surface of sand particles was functionalized with (3-chloropropyl)trimethoxy silane to provide the active sites for bond formation with MOF particles. Using a heat treatment step, MOF particles were bonded on the surface of sand particles, thereby providing a photocatalyst more applicable in real environments. The presence of amino-functional groups in MOF was influential in bond formation. Furthermore, they are effective in the activation of the photocatalyst under visible-light irradiation. The photocatalyst properties were investigated by FESEM, FTIR, XPS, EDS, and DRS analysis. The impact of various parameters, such as light power, irradiation and contact time, TDS impact, and pH, was examined. The composite produced by immobilization of NH₂-101(Fe) on the surface of sand-Cl showed the high Cr(VI) removal efficiency (80% at 20 mg L^-1) as a result of the strong chemical bond formation through the suitable functional groups incorporated in materials. Under the optimum conditions, the reduction rate reached more than 99% using irradiation by 1000 W visible light for 30 min.

Nano-MOF@defected film C3N4 Z-scheme composite for visible-light photocatalytic nitrogen fixation

Photocatalytic nitrogen fixation has attracted extensive attention in recent years.