Characterization, swelling and slow-release properties of a new controlled release fertilizer based on wheat straw cellulose hydrogel

A biodegradable multifunctional pectin-montmorillonite fertilizer coating: Controlled-release, water-retention and soil-cementation

Coated fertilizers have been widely used to improve fertility in barren land. However, improving soil structure and water-retention capacity is also essential for arid and semi-arid areas with sandy soils to promote crop growth. Most currently available coated fertilizers rarely meet these requirements, limiting their application scope. Therefore, this study "tailored" pectin-montmorillonite (PM) multifunctional coatings for arid areas, featuring intercalation reactions and nanoscale entanglement between pectin and montmorillonite via hydrogen bonding and electrostatic and van der Waals forces. Notably, PM coatings have demonstrated an effective "relay" model of action. First, the PM-50 coating could act as a "shield" to protect urea pills, increasing the mechanical strength (82.12 %). Second, this coating prolonged the release longevity of urea (<0.5 h to 15 days). Further, the remaining coating performed a water-retention function. Subsequently, the degraded coating improved the soil properties. Thus, this coating facilitated the growth of wheat seedlings in a simulated arid environment. Moreover, the cytotoxicity test, life cycle assessment, and soil biodegradation experiment showed that the PM coating exhibited minimal environmental impact. Overall, the "relay" model of PM coating overcomes the application limitations of traditional coated fertilizers and provides a sustainable strategy for developing coating materials in soil degradation areas.

Biodegradable Cassava Starch/Phosphorite/Citric Acid Based Hydrogel for Slow Release of Phosphorus: In Vitro Study

Phosphorous (P) is one the most important elements in several biological cycles, and is a fundamental component of soil, plants and living organisms. P has a low mobility and is quickly adsorbed on clayey soils, limiting its availability and absorption by plants. Here, biodegradable hydrogels based on Cassava starch crosslinked with citric acid (CA) were made and loaded with KH2PO4 and phosphorite to promote the slow release of phosphorus, the storing of water, and the reduction in P requirements during fertilization operations. Crosslinking as a function of CA concentrations was investigated by ATR-FTIR and TGA. The water absorption capacity (WAC) and P release, under different humic acid concentration regimens, were studied by in vitro tests. It is concluded that hydrogel formed from 10% w/w of CA showed the lowest WAC because of a high crosslinking degree. Hydrogel containing 10% w/w of phosphorite was shown to be useful to encouraging the slow release of P, its release behavior being fitted to the Higuchi kinetics model. In addition, P release increased as humic acid contents were increased. These findings suggest that these hydrogels could be used for encouraging P slow release during crop production.

Agriculture 4.0: Polymer Hydrogels as Delivery Agents of Active Ingredients

The evolution from conventional to modern agricultural practices, characterized by Agriculture 4.0 principles such as the application of innovative materials, smart water, and nutrition management, addresses the present-day challenges of food supply. In this context, polymer hydrogels have become a promising material for enhancing agricultural productivity due to their ability to retain and then release water, which can help alleviate the need for frequent irrigation in dryland environments. Furthermore, the controlled release of fertilizers by the hydrogels decreases chemical overdosing risks and the environmental impact associated with the use of agrochemicals. The potential of polymer hydrogels in sustainable agriculture and farming and their impact on soil quality is revealed by their ability to deliver nutritional and protective active ingredients. Thus, the impact of hydrogels on plant growth, development, and yield was discussed. The question of which hydrogels are more suitable for agriculture-natural or synthetic-is debatable, as both have their merits and drawbacks. An analysis of polymer hydrogel life cycles in terms of their initial material has shown the advantage of bio-based hydrogels, such as cellulose, lignin, starch, alginate, chitosan, and their derivatives and hybrids, aligning with sustainable practices and reducing dependence on non-renewable resources.

An MXene-Grafted Terpolymer Hydrogel for Adsorptive Immobilization of Toxic Pb(II) and Post-Adsorption Application of Metal Ion Hydrogel

Toxic metal ions present in industrial waste, such as Pb(II), introduce deleterious effects on the environment. Though the adsorptive removal of Pb(II) is widely reported, there is a dearth of research on the suitable utilization and disposal of the Pb(II)-adsorbed adsorbent. In this work, an MXene-grafted terpolymer (MXTP) hydrogel has been designed for the adsorption of Pb(II) under ambient conditions of pH and temperature. The hydrogel MXTP was synthesized by facile one-pot polymerization in aqueous solvent, and the detailed structural characterization of terpolymer (TP), MXTP, and Pb(II)-loaded MXTP, i.e., Pb(II)-MXTP, was carried out by a combination of proton nuclear magnetic resonance (1H NMR), Fourier-transform infrared (FTIR), X-ray photoelectron spectroscopy (XPS), X-ray diffractometric (XRD), thermogravimetric/differential thermogravimetric (TG/ DTG), and field emission scanning electron microscopic (FESEM) analyses. The specific capacitance and conductivities of Pb(II)-MXTP were studied with cyclic voltammetry (CV) and electrical impedance spectroscopy (EIS), which unambiguously indicate successful post-adsorption application. The specific capacitance of MXTP decreased after Pb(II) adsorption, whereas the conductivity increased significantly after Pb(II) adsorption, showing that MXTP can be successfully deployed as a solid electrolyte/anode after Pb(II) adsorption. This study covers the synthesis of a novel MXene-grafted terpolymer hydrogel for adsorptive exclusion of Pb(II) and assessment of the as-adsorbed Pb(II)-loaded hydrogel as a solid electrolyte/anode material and is the first demonstration of such post-adsorptive application.

Progress in the Preparation of Stimulus-Responsive Cellulose Hydrogels and Their Application in Slow-Release Fertilizers

Agriculture is facing challenges such as water scarcity, low fertilizer utilization, food security and environmental sustainability. Therefore, the development of slow-release fertilizer (SRF) with controlled water retention and release is particularly important. Slow-release fertilizer hydrogel (SRFH) has a three-dimensional (3D) network structure combined with fertilizer processing, displaying excellent hydrophilicity, biocompatibility and controllability. Cellulose has abundant hydroxyl groups as well as outstanding biodegradability and special mechanical properties, which make it a potential candidate material for the fabrication of hydrogels. This work would analyze and discuss various methods for preparing stimulus-responsive cellulose hydrogels and their combinations with different fertilizers. Moreover, the application and release mechanism of stimulus-responsive cellulose hydrogels in SRF have been summarized as well. Finally, we would explore the potential issues of stimulus-responsive cellulose hydrogels serving as an SRF, propose reasonable solutions and give an outlook of the future research directions.

A Comprehensive Review of Polysaccharide-Based Hydrogels as Promising Biomaterials

Polysaccharides have emerged as a promising material for hydrogel preparation due to their biocompatibility, biodegradability, and low cost. This review focuses on polysaccharide-based hydrogels' synthesis, characterization, and applications. The various synthetic methods used to prepare polysaccharide-based hydrogels are discussed. The characterization techniques are also highlighted to evaluate the physical and chemical properties of polysaccharide-based hydrogels. Finally, the applications of SAPs in various fields are discussed, along with their potential benefits and limitations. Due to environmental concerns, this review shows a growing interest in developing bio-sourced hydrogels made from natural materials such as polysaccharides. SAPs have many beneficial properties, including good mechanical and morphological properties, thermal stability, biocompatibility, biodegradability, non-toxicity, abundance, economic viability, and good swelling ability. However, some challenges remain to be overcome, such as limiting the formulation complexity of some SAPs and establishing a general protocol for calculating their water absorption and retention capacity. Furthermore, the development of SAPs requires a multidisciplinary approach and research should focus on improving their synthesis, modification, and characterization as well as exploring their potential applications. Biocompatibility, biodegradation, and the regulatory approval pathway of SAPs should be carefully evaluated to ensure their safety and efficacy.

Renewable Poly(Lactic Acid)Lignocellulose Biocomposites for the Enhancement of the Water Retention Capacity of the Soil

This manuscript details the preparation and characterization of a renewable biocomposite material intended as a soil conditioner based on low-molecular-weight poly(lactic acid) (PLA) and residual biomass (wheat straw and wood sawdust). The swelling properties and biodegradability of the PLA-lignocellulose composite under environmental conditions were evaluated as indicators of its potential for applications in soil. Its mechanical and structural properties were characterized by differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), Fourier-transform infrared spectroscopy (FTIR), and scanning electron microscopy (SEM). Results showed that the incorporation of lignocellulose waste material into PLA increased the swelling ratio of the biocomposite by up to 300%. The application of the biocomposite of 2 wt% in soil enhanced its capacity for water retention by 10%. In addition, the cross-linked structure of the material proved to be capable of swelling and deswelling repeatedly, indicating its good reusability. Incorporating lignocellulose waste in the PLA enhanced its stability in the soil environment. After 50 days of the experiment, almost 50% of the sample had degraded in the soil.

Preparation and properties of Sanxan gel based fertilizer for water retention and slow-release

The advent of gel fertilizers has benefited agriculture and the environment. This study utilized sanxan, a novel polysaccharide, as a carrier and loaded it with urea to create sanxan gel fertilizer (SGF), thus creating a new, effective gel fertilizer. Water retention and sustained release ability of SGF were evaluated, and crop experiments were carried out. The results showed that, SGF that content 2.0 % solution of sanxan and loaded 20 g g^-1 of urea were prepared by heating-cooling method. The water-retention ratio of SGF was attained at 56.4 g g^-1 for 10 h. The urea releases of SGF in water have a more significant persistence than pure urea. In addition, wheat growth was promoted by SGF, compared with pure urea, the biomass of wheat shoot and root increased 27.4 % and 62.2 % during 20 days, respectively. Consequently, SGF has the ability to retain water and slowly release nutrition, which was an ideal carrier for managing water and urea. The SGF developed in this study provides data support and theoretical basis for the application of sanxan gel in agriculture and the environment.

Bioresource Upgrade for Sustainable Energy, Environment, and Biomedicine

We conceptualize bioresource upgrade for sustainable energy, environment, and biomedicine with a focus on circular economy, sustainability, and carbon neutrality using high availability and low utilization biomass (HALUB). We acme energy-efficient technologies for sustainable energy and material recovery and applications. The technologies of thermochemical conversion (TC), biochemical conversion (BC), electrochemical conversion (EC), and photochemical conversion (PTC) are summarized for HALUB. Microalgal biomass could contribute to a biofuel HHV of 35.72 MJ Kg-1 and total benefit of 749 $/ton biomass via TC. Specific surface area of biochar reached 3000 m2 g-1 via pyrolytic carbonization of waste bean dregs. Lignocellulosic biomass can be effectively converted into bio-stimulants and biofertilizers via BC with a high conversion efficiency of more than 90%. Besides, lignocellulosic biomass can contribute to a current density of 672 mA m-2 via EC. Bioresource can be 100% selectively synthesized via electrocatalysis through EC and PTC. Machine learning, techno-economic analysis, and life cycle analysis are essential to various upgrading approaches of HALUB. Sustainable biomaterials, sustainable living materials and technologies for biomedical and multifunctional applications like nano-catalysis, microfluidic and micro/nanomotors beyond are also highlighted. New techniques and systems for the complete conversion and utilization of HALUB for new energy and materials are further discussed.

Cellulose/nanocellulose superabsorbent hydrogels as a sustainable platform for materials applications: A mini-review and perspective

Superabsorbent hydrogels (SAH) are crosslinked three-dimensional networks distinguished by their super capacity to stabilize a large quantity of water without dissolving. Such behavior enables them to engage in various applications. Cellulose and its derived nanocellulose can become SAHs as an appealing, versatile, and sustainable platform because of abundance, biodegradability, and renewability compared to petroleum-based materials. In this review, a synthetic strategy that reflects starting cellulosic resources to their associated synthons, crosslinking types, and synthetic controlling factors was highlighted. Representative examples of cellulose and nanocellulose SAH and an in-depth discussion of structure-absorption relationships were listed. Finally, various applications of cellulose and nanocellulose SAH, challenges and existing problems, and proposed future research pathways were listed.

Environmentally friendly hydrogel: A review of classification, preparation and application in agriculture

Superabsorbent hydrogel (SH) is three-dimensional (3D) cross-linked hydrophilic polymer that can absorb and retain large quantities of water or other aqueous solutions. SH is made of water-affinity monomers and is widely used in biomedicine, wastewater treatment, hygiene and slow-release fertilizers (SRFs). This article focused on the preparation methods of SH, superabsorbent hydrogel composite and the application of SH in agriculture. By selecting various synthetic technologies and cross-linking agents, a series of chemical cross-linking or physical networks can be designed and tailored to meet specific applications. In view of the excellent characteristics of water absorption, biodegradability, water retention and slow-release capacity, SH occupies a dominant position in the SRFs market. In this work, the agricultural application of SH in double coated SRFs and nutrients carriers is also discussed. Some mechanisms related to the nutrient release were analyzed by mathematical models. In addition, some agronomic benefits of using superabsorbent hydrogels in improving water absorption, water holding capacity and increasing crop yields were also discussed. Although SH has certain shortcomings, from the perspective of long-term development, it will further show great potential in sustainable agriculture.

Improvement of bio-based polyurethane and its optimal application in controlled release fertilizer

In the past decades, polyurethane has emerged as a new material that has been widely developed and applied in coated controlled release fertilizers (CRFs). Particularly in recent years, the excessive consumption of petroleum resources and increasing demand for sustainable development have resulted in considerable interest in bio-based polyurethane coated controlled-release fertilizers. This review article focuses on the application and progress of environmentally friendly bio-based materials in the polyurethane-coated CRF industry. We also explore prospects for the green and sustainable development of coated CRFs. Using animal and plant oils, starch, lignin, and cellulose as raw materials, polyols can be produced by physical, chemical, and biological means to replace petroleum-based materials and polyurethane film coating for CRFs can be prepared. Various modifications can also improve the hydrophobicity and degradability of polyurethane film. A growing body of research on bio-based polyurethane has revealed its great potential in the production and application of coated CRFs. The purpose of this review is to highlight the practicality of bio-based materials in the application of polyurethane-coated CRFs and to clarify their current limitations.

Controlled release fertilizers (CRFs) for climate-smart agriculture practices: a comprehensive review on release mechanism, materials, methods of preparation, and effect on environmental parameters

Fertilizers play an essential role in increasing crop yield, maintaining soil fertility, and provide a steady supply of nutrients for plant requirements. The excessive use of conventional fertilizers can cause environmental problems associated with nutrient loss through volatilization in the atmosphere, leaching to groundwater, surface run-off, and denitrification. To mitigate environmental issues and improve the longevity of fertilizer in soil, controlled release fertilizers (CRFs) have been developed. The application of CRFs can reduce the loss of nutrients, provide higher nutrient use efficiency, and improve soil health simultaneously to achieve the goals of climate-smart agricultural (CSA) practices. The major findings of this review paper are (1) CRFs can prevent direct exposure of fertilizer granule to soil and prevent loss of nutrients such as nitrate and nitrous oxide emissions; (2) CRFs are less affected by the change in environmental parameters, and that can increase longevity in soil compared to conventional fertilizers; and (3) CRFs can maintain required soil nitrogen levels, increase water retention, reduce GHG emissions, lead to optimum pH for plant growth, and increase soil organic matter content. This paper could give good insights into the ongoing development and future perspectives of CRFs for CSA practices.

Hydrogel Application in Urban Farming: Potentials and Limitations—A Review

Urban agriculture plays a vital role in ensuring the self-sufficiency of a great variety of fresh vegetables and nutrients. It promotes a sustainable food system as well as reducing the dependency on imports for the growing population. Urban farming has made it possible for agriculture practices to be implemented anywhere at any time in a sophisticated way. Hydrogel has been introduced in urban agriculture in the past few decades. However, the application of hydrogel in urban agriculture is still being explored in terms of hydrogel types, structure, physical and chemical properties, change due to external factors, and its suitability for different plant species. This review discusses the potentials and limitations of hydrogel in different application conditions. We present the state of knowledge on hydrogel production and crosslinking methods, hydrogel characteristics, water absorption and release mechanisms of hydrogel, hydrogel advantages and limitations, and current and future applications in urban farming.

Biochar and slow-releasing nitrogen fertilizers improved growth, nitrogen use, yield, and fiber quality of cotton under arid climatic conditions

The efficiency of nitrogenous fertilizers in South Asia is on a declining trajectory due to increased losses. Biochar (BC) and slow-releasing nitrogen fertilizers (SRNF) have been found to improve nitrogen use efficiency (NUE) in certain cases. However, field-scale studies to explore the potential of BC and SRNF in south Asian arid climate are lacking. Here we conducted a field experiment in the arid environment to demonstrate the response of BC and SRNF on cotton growth and yield quality. The treatments were comprised of two factors, (A) nitrogen sources, (i) simple urea, (ii)neem-coated urea, (iii)sulfur-coated urea, (iv) bacterial coated urea, and cotton stalks biochar impregnated with simple urea, and (B) nitrogen application rates, N₁=160 kg ha^-1, N₂ = 120 kg ha^-1, and N₃ = 80 kg ha^-1. Different SRNF differentially affected cotton growth, morphological and physiological attributes, and seed cotton yield (SCY). The bacterial coated urea at the highest rate of N application (160 kg ha^-1) resulted in a higher net leaf photosynthetic rate (32.8 μmol m^-2 s^-1), leaf transpiration rate (8.10 mmol s^-1), and stomatal conductance (0.502 mol m^-2 s^-1), while leaf area index (LAI), crop growth rate (CGR), and seed cotton yield (4513 kg ha^-1) were increased by bacterial coated urea at 120 kg ha^-1 than simple urea. However, low rate N application (80 kg ha^-1) of bacterial coated urea showed higher nitrogen use efficiency (39.6 kg SCY kg^-1 N). The fiber quality (fiber length, fiber strength, ginning outturn, fiber index, and seed index) was also increased with the high N application rates than N2 and N3 application. To summarize, the bacterial coated urea with recommended N (160 kg ha^-1) and 75% of recommended N application (120 kg ha^-1) may be recommended for farmers in the arid climatic conditions of Punjab to enhance the seed cotton yield, thereby reducing nitrogen losses.

A TEMPO-oxidized cellulose nanofibers/MOFs hydrogel with temperature and pH responsiveness for fertilizers slow-release

In this work, a kind of MOF MIL-100(Fe)@CNFs hydrogel (MC) based on TEMPO-oxidized cellulose nanofibers (CNFs) for fertilizers slow-release was prepared by free-radical polymerization, where N-vinyl caprolactam (NVCL) and CNFs were involved to exhibit temperature and pH response, respectively. Particularly, porous MIL-100(Fe), a kind of metal organic frameworks (MOFs), was introduced to optimize the load and slow-release capabilities. The Fourier transform infrared spectroscopy, X-ray diffraction, scanning electron microscopy, and thermogravimetric analysis were used to characterize. The swelling behaviors and water-retention capabilities of hydrogels were evaluated. Using urea as the model fertilizer, the slow-release mechanism was revealed. Wheat was used as the model crop to evaluate the practical growth status. Compared with MC-0% hydrogels, the MC-10% hydrogels exhibited a better swelling capacity (37 g/g), water-retention (22.78%) and slow-release performance (40.84%). It also exhibited sensitivities to temperature and pH for regulating urea release. Besides, the number of tillers and leaves of wheat fertilized with MC hydrogels significantly increased, as did the photosynthetic rate. In conclusion, the MC-0% hydrogels had a positive influence on crops growth, and promoted the possible utilization of hydrogels in slow-release fertilizers.

Microfluidic encapsulation for controlled release and its potential for nanofertilisers

Nanotechnology is increasingly being utilized to create advanced materials with improved or new functional attributes. Converting fertilizers into a nanoparticle-form has been shown to improve their efficacy but the current procedures used to fabricate nanofertilisers often have poor reproducibility and flexibility. Microfluidic systems, on the other hand, have advantages over traditional nanoparticle fabrication methods in terms of energy and materials consumption, versatility, and controllability. The increased controllability can result in the formation of nanoparticles with precise and complex morphologies (e.g., tuneable sizes, low polydispersity, and multi-core structures). As a result, their functional performance can be tailored to specific applications. This paper reviews the principles, formation, and applications of nano-enabled delivery systems fabricated using microfluidic approaches for the encapsulation, protection, and release of fertilizers. Controlled release can be achieved using two main routes: (i) nutrients adsorbed on nanosupports and (ii) nutrients encapsulated inside nanostructures. We aim to highlight the opportunities for preparing a new generation of highly versatile nanofertilisers using microfluidic systems. We will explore several main characteristics of microfluidically prepared nanofertilisers, including droplet formation, shell fine-tuning, adsorbate fine-tuning, and sustained/triggered release behavior.

Materials diversity of hydrogel: Synthesis, polymerization process and soil conditioning properties in agricultural field

BACKGROUND

The cumulative influence of global warming, climate abrupt changes, growing population, topsoil erosion is becoming a threatening alarm for facing food challenges and upcoming global water issues. It ultimately affects the production of food in a water-stressed environment and slows down the production with more consumption of fertilizers by plants. The superabsorbent hydrogels (SAHs) have extensive applications in the agricultural field and proved very beneficial for plant growth and soil health. These polymeric materials are remarkably distinct from hygroscopic materials owing to their multidimensional network structure. It retains a lot of water in its 3D network and releases it slowly along with nutrients to plant in stressed environment.

AIM OF REVIEW

A soil conditioner boosts up the topology, compactness, and mechanical properties (swelling, water retention, and slow nutrient release) of soil. The superabsorbent hydrogel plays an astonishing role in preventing the loss of nutrients during the heavy flow of rainwater from the upper surface of soil because these SAHs absorb water and get swollen to keep water for longer time. The SAHs facilitate the growth of plants with limited use of water and fertilizers. Beyond, it improves the soil health and makes it fertile in horticulture and drought areas.

KEY SCIENTIFIC CONCEPT OF REVIEW

The SAHs can be synthesized through grafting and cross-linking polymerization to introduce value-added features and extended network structure. The structure of superabsorbent hydrogel entirely based on cross-linking that prompts its use in the agricultural field as a soil conditioner. The properties of a SAHs vary due to its nature of constituents, polymerization process (grafting or cross-linking), and other parameters. The use of SAHs in agricultural field comparatively enhances the swelling rate up to 60-80%, maximum water retaining, and slowly nutrient release to plants for a longer time.

Regenerated Cellulose Products for Agricultural and Their Potential: A Review

Cellulose is one of the most abundant natural polymers with excellent biocompatibility, non-toxicity, flexibility, and renewable source. Regenerated cellulose (RC) products result from the dissolution-regeneration process risen from solvent and anti-solvent reagents, respectively. The regeneration process changes the cellulose chain conformation from cellulose I to cellulose II, leads the structure to have more amorphous regions with improved crystallinity, and inclines towards extensive modification on the RC products such as hydrogel, aerogel, cryogel, xerogel, fibers, membrane, and thin film. Recently, RC products are accentuated to be used in the agriculture field to develop future sustainable agriculture as alternatives to conventional agriculture systems. However, different solvent types and production techniques have great influences on the end properties of RC products. Besides, the fabrication of RC products from solely RC lacks excellent mechanical characteristics. Thus, the flexibility of RC has allowed it to be homogenously blended with other materials to enhance the final products' properties. This review will summarize the properties and preparation of potential RC-based products that reflect its application to replace soil the plantation medium, govern the release of the fertilizer, provide protection on crops and act as biosensors.

Activated-carbon-filled agarose hydrogel as a natural medium for seed germination and seedling growth

An activated-carbon-filled agarose (Agar-AC) hydrogel containing various concentrations of activated carbon (AC) was successfully fabricated through a simple solvent cast technique. Compared to pure agarose hydrogels, Agar-AC hydrogels exhibited excellent mechanical properties, good thermal stability and a highly developed pore structure. The Agar-AC hydrogels also showed a certain degree of improvement in water retention performance, while their swelling ratio decreased with the addition of AC. The incorporation of AC did not influence the crystallinity of the agarose hydrogel, and no chemical modification occurred according to XRD and FTIR. In rapeseed seed germination experiments, the growth indexes of rapeseed, including the germination percentage, root length, stem length, fresh weight and dry weight, were enhanced by the incorporation of a suitable amount of AC. These results indicated that AC has great potential to enhance the properties of agarose hydrogels and improve seed germination and plant growth, which implies that Agar-AC hydrogels can be used as natural materials for agricultural applications.

Guar gum based hydrogel as controlled micronutrient delivery system: Mechanism and kinetics of boron release for agricultural applications

A boron loaded super-absorbent hydrogel (BLSAH) was developed through in situ incorporation of boron (B) in a guar gum-based hydrogel and characterized with FTIR, thermo-gravimetric analysis (TGA), scanning electron microscopy (SEM), and swelling studies, showing maximum absorption up to 356 g/g. The release pattern of B from the BLSAH and its kinetics was studied in water as well as soil. The B release pattern of the BLSAH was also compared with the commercial B fertilizer, boronated single super phosphate (bSSP). The BLSAH, following the Fickian mechanism, released 38% B, as compared with 51% of the bSSP, during the incubation period of 30 days in soil. The half-life period for the BLSAH (96.25 days) in soil was almost triple that of the bSSP's half-life (33.32 days), which is indicative of the slow and controlled release of B from the BLSAH. Thus, owing to its sustained nutrient release ability, the synthesized BLSAH exhibited wide potential for applications in agriculture sector.

Determination of the Best Controlled-Release Potassium Chloride and Fulvic Acid Rates for an Optimum Cotton Yield and Soil Available Potassium

Potassium and fulvic acid (FA) fertilizer applications are two important measures for improving cotton growth. However, there are few studies on the application interactive effects of controlled-release potassium chloride (CRK) in combination with FA on cotton production. To explore the effects of CRK combined with FA on cotton, field experiments were conducted in 2018 and 2019 using a split-plot design. The main plots were assigned to two types of potassium fertilizer - controlled-release potassium chloride (CRK) and potassium sulfate (KS) - while low, moderate, and high FA application rates (90, 180, and 270 kg ha^-1) were assigned to the subplots. The cotton yield, fiber quality, net profit, soil available potassium concentration, potassium use efficiency, and leaf photosynthesis were markedly affected by potassium fertilizer and FA. The cotton boll number and boll weight in the 2 years and the yield in 2019 were all affected by the interaction between potassium fertilizer and FA. Compared to the other potassium treatments, the CRK × FA180 treatment increased the seed yield and net profit by 4.29-14.92% and 13.72-62.30%, respectively, over the 2 years. The potassium agronomy efficiency and potassium recovery efficiency (KRE) of the CRK × FA180 treatment were also improved by 6.25-30.77% and 3.82-12.78% compared to those of the other potassium treatments. Overall, the FA180 treatment resulted in better cotton growth than that in the FA90 and FA270 treatments. The release period of CRK in the field during the growth period of cotton was longer than that detected by 25°C static water extraction, which increased the soil available potassium content and met the potassium demands over the whole cotton growth period. Therefore, the application of CRK in combination with 180 kg ha^-1 FA is the best choice for cotton fertilization.

Biochar bound urea boosts plant growth and reduces nitrogen leaching

Over use of N fertilizers, most commonly as urea, had been seriously concerned as a major source of radiative N (Nr) for severe environment impacts through leaching, volatilization, and N₂O emission from fertilized croplands. It had been well known that biochar could enhance N retention and use efficiency by crops in amended croplands. In this study, a granular biochar-mineral urea composite (Bio-MUC) was obtained by blending urea with green waste biochar supplemented with clay minerals of bentonite and sepiolite. This Bio-MUC material was firstly characterized by microscopic analyses with FTIR, SEM-EDS and STEM, subsequently tested for N leaching in water in column experiment and for N supply for maize in pot culture, compared to conventional urea fertilizer (UF). Microscopic analyses indicated binding of urea N to particle surfaces of biochar and clay minerals in the Bio-MUC composite. In the leaching experiment over 30 days, cumulative N release as NH₄⁺-N and of dissolved organic carbon (DOC) was significantly smaller by >70% and by 8% from the Bio-MUC than from UF. In pot culture with maize growing for 50 days, total fresh shoot was enhanced by 14% but fresh root by 25% under Bio-MUC compared to UF. This study suggested that N in the Bio-MUC was shown slow releasing in water but maize growth promoting in soil, relative to conventional urea. Such effect could be related mainly to N retention by binding to biochar/mineral surfaces and partly by carbon bonds of urea to biochar in the Bio-MUC. Therefore, biochar from agro-wastes could be used for blending urea as combined organo/mineral urea to replace mineral urea so as to reduce N use and impacts on global Nr. Of course, how such biochar combined urea would impact N process in soil-plant systems deserve further field studies.

Modification of Collagen Derivatives with Water-Soluble Polymers for the Development of Cross-Linked Hydrogels for Controlled Release

Novel cross-linked hydrogels were synthesized as potential materials for the development of smart biofertilizers. For this purpose, hydrogels were prepared using collagen hydrolysate recovered from tannery waste. The water-soluble polymer poly(sodium 4-styrenesulfonate-co-glycidyl methacrylate) (P(SSNa-co-GMAx)) was among others used for the cross-linking reaction that combined hydrophilic nature with epoxide groups. The synthetic procedure was thoroughly investigated in order to ensure high percentage of epoxide groups in combination with water-soluble behavior. The copolymer did not show cytotoxicity against normal lung, skin fibroblasts, or nasal polyps fibroblasts. Through the present work, we also present the ability to control the properties of cross-linked hydrogels by altering copolymer's composition and cross-linking parameters (curing temperature and time). Hydrogels were then studied in terms of water-uptake capacity for a period up to six days. The techniques Proton Nuclear Magnetic Resonance (1H NMR), Thermogravimetric Analysis (TGA), Size Exclusion Chromatography (SEC), and Attenuated Total Reflection Fourier Transform Infrared Spectroscopy (ATR-FTIR) were applied for the characterization of the synthesized copolymers and the cross-linked hydrogels. Three samples of biofertilizers based on collagen hydrolysate functionalized with P(SSNa-co-GMAx) and starch and having nutrients encapsulated (N, P, K) were prepared and characterized by physical-chemical analysis and Energy Dispersive X-ray analysis-Scanning Electron Microscope (EDAX-SEM) in terms of microstructure. Preliminary tests for application as fertilizers were performed including the release degree of oxidable organic compounds.

Cellulose based materials for controlled release formulations of agrochemicals: A review of modifications and applications

Controlled release formulations (CRFs) of agrochemicals have been attracted considerable attention due to their friendliness to environment. The commercial supporting materials for CRFs of agrochemicals are non-degradable, leading to secondary pollution issue. Cellulose, as the most abundant natural materials in the world, is regarded as one of the most ideal substitutes for non-degradable supporting materials thanks to its good biocompatibility and biodegradability. As raw cellulose materials suffer several problems, such as poor mechanical strength, fast release rate, etc., chemical modifications are commonly performed to improve their properties. In this review, modification methods of cellulose materials for CRFs of agrochemicals were introduced. The relationships between release rate and cellulose based materials were discussed in detail. The applications of cellulose materials for CRFs of agrochemicals were also expounded.

Novel Semi-IPN Nanocomposites with Functions of both Nutrient Slow-Release and Water Retention. 2. Effects on Soil Fertility and Tomato Quality

So far, the effects of the semi-interpenetrating polymer network (semi-IPN) composites with functions of both nutrient slow-release and water retention on soil physicochemical properties, yield, and quality of crops have not been studied. In Part 1 of this paper ( Song, J.; Zhao, H.; Zhao, G.; Xiang, Y.; Liu, Y. J. Agric. Food Chem. 2019 , DOI: 10.1021/acs.jafc.9b00888 ), superabsorbent polymers SAP_WS (grafting wheat straw (WS) to poly(acrylic-co-acrylamide), which is WS-g-P(AA-co-AM)) and SAP_HEC (HEC (hydroxyethyl cellulose)-g-P(AA-co-AM)), and their semi-IPN nanocomposites SI-PSRF/SAP_WS and SI-PSRF/SAP_HEC (formed by chemical bonding of SAP_WS or SAP_HEC with PSRF (NPK-containing polymeric slow-release fertilizer)) were prepared, and their microstructures and degradation performances were systematically studied. In this study, effects of these two nanocomposites on soil physicochemical properties, crop yield, and quality as well as soil fertility, especially the relationships between these effects and the degradation performances of the materials themselves, were investigated by a pot experiment of the tomato. Results show that SI-PSRF/SAP nanocomposites can regulate the pH values of weak alkaline soils close to 7.0. The changes of soil pH values, in our study, are basically synchronized with the degradation rates of SI-PSRF/SAP, the higher the degradation rate of SI-PSRF/SAP, the lower the pH value of the alkaline soil treated. Compared with PSRF+SAP (the simple physically mixed system of PSRF and SAP) and PSRF, during the whole growth period of the tomato, SI-PSRF/SAP treatments have the lowest nitrogen release amounts, 4.74 g for SI-PSRF/SAP_WS and 4.88 g for SI-PSRF/SAP_HEC, the highest nitrogen contents of soils after day 40, and the highest nitrogen contents of plants on day 100, 1.16 and 1.68 g for SI-PSRF/SAP_WS and 1.26 and 1.86 g for SI-PSRF/SAP_HEC. While for PSRF+SAP_WS, PSRF+SAP_HEC, and PSRF, they are 5.16 g, 0.81 g, 0.63 g and 5.26 g, 0.87 g, 0.66 g and 5.17 g, 0.63 g, 0.52 g, respectively. There is a significant positive correlation between the material degradation rates and their nitrogen release amounts in this study, while SI-PSRF/SAP systems have the highest correlation coefficient, 0.950. In addition, compared to the control blank, the SI-PSRF/SAP system significantly increases tomato yield, 270.1% for SI-PSRF/SAP_WS and 301.7% for SI-PSRF/SAP_HEC. Compared with PSRF+SAP, the SI-PSRF/SAP system can make the soil treated become a high-quality soil by influencing the soil pH value, conductivity, cation exchange capacity, and the contents of nitrogen, phosphorus, organic carbon, and active organic carbon, which have significant impact on the soil quality. The chemical-bonded functional nanocomposites with a semi-IPN three-dimensional network structures formed by hydrogen-bonding interactions among functional groups of their components can more efficiently improve soil fertility, increase soil nutrient supply capacity, and promote plants growth and development as well as solve the environmental pollution caused by traditional fertilizers. The technology reported in this paper is simple and feasible for large-scale production of fertilizer with both water retention and nutrient slow-release, even nanofertilizer, which has great application potential.

Novel Semi-IPN Nanocomposites with Functions of both Nutrient Slow-Release and Water Retention. 1. Microscopic Structure, Water Absorbency, and Degradation Performance

Few studies have been conducted on the use of general nanotechnology-based principles for providing nutrients to crops. Water and fertilizer are the most important inputs in determining crop yield and profit. In this paper, super-absorbent polymers SAP_WS (grafting wheat straw (WS) to poly(acrylic-co-acrylamide), which is WS-g-P(AA-co-AM)) and SAP_HEC (HEC (hydroxyethyl cellulose)-g-P(AA-co-AM)) and their semi-interpenetrating polymer network (semi-IPN) nanocomposites SI-PSRF/SAP_WS and SI-PSRF/SAP_HEC (formed by chemical bonding of SAP_WS or SAP_HEC with PSRF (NPK-containing polymeric slow-release fertilizer)) were prepared. Due to the differences between activity and number of functional groups in WS and HEC, the water absorption properties and degradation performances of SAP_WS and SAP_HEC and their chemically bonded function nanocomposites SI-PSRF/SAP_WS and SI-PSRF/SAP_HEC are different. The maximum water absorption ratios of SAP_WS, SAP_HEC, SI-PSRF/SAP_WS, and SI-PSRF/SAP_HEC can reach 200.00 g/g, 240.00 g/g, 119.91g/g, and 127.43 g/g, respectively. Effects of the structures of these four materials on their degradation performances were studied via a tomato pot experiment. The changes in microstructures of these materials during the degradation processes were characterized by TEM, SEM, FTIR, XRD, XPS, and other techniques. Results show that the degradation rate of the chemically bonded functional nanocomposites with a semi-IPN structure SI-PSRF/SAP system is higher than that of SAP+PSRF (the simple physically mixed system of PSRF and SAP). Due to the differences among the activities and quantities of functional groups in WS and HEC, the water absorption properties of SI-PSRF/SAP_WS and SI-PSRF/SAP_HEC are different, and there are different degradation rates for these two functional nanocomposites.

Thermo and pH-responsive methylcellulose and hydroxypropyl methylcellulose hydrogels containing K2SO4 for water retention and a controlled-release water-soluble fertilizer

Hydrogel as commercial soil conditioner has the potential to improve soil properties and reduce water scarcity in growing plants. However, use of polyacrylamide-based hydrogel in agriculture pose potential human health hazards. Hydrogel systems were prepared from temperature-responsive methylcellulose (MC) and hydroxypropyl methylcellulose (HPMC) blended with potassium sulfate (K₂SO₄, K-containing fertilizer). Blended K₂SO₄ in hydrogels affects the hydrophobic interaction of MC and HPMC, and hydrogels prepared in 0.25 M K₂SO₄ decrease the gelation temperatures of MC and HPMC from 55.6 and 67.4 °C to 27.8 and 35.1 °C, respectively. The equilibrium swelling ratio (St) of MC and HPMC hydrogels was increased 15 times and hydrogels maintained a steady appearance. The swelling kinetics of the MC and HPMC hydrogels followed Schott's second-order model and kinetic parameters indicated that adding K₂SO₄ can improve the initial swelling rate. K₂SO₄ decreases the pore size of the MC and HPMC hydrogel from 26.8 and 21.5 μm to 14.7 and 14.2 μm. A plant growth assessment indicated inhibition in plant growth occurred without the application of the hydrogels. Adding K₂SO₄ increases mechanical properties of the hydrogels. Treatment with 0.5% hydrogel considerably improves the water-holding and water-retention capacities of sandy soil. The 20-20-20 fertilizer release results revealed at that at 35 °C and a pH below 7, the hydrogel systems reduce the release rate of the fertilizer. The best result was observed with the Korsmeyer-Peppas model, indicating that the fertilizer transport mechanism involves Fickian diffusion and swelling-controlled release. This study discovered that environmentally responsive cellulose-based hydrogels have potential for use as soil conditioners and as controlled release devices in horticulture and agriculture.

Slow release fertilizer hydrogels: a review

Slow release fertilizer hydrogels combine fertilizer and hydrogel into one system.

Lignin linked to slow biodegradability of urea-crosslinked starch in an anaerobic soil environment

For slowing fast solubility and increasing the period of urea’s release in soil, urea-crosslinked starch (UcS) was prepared and applied as a slow release fertilizer. The higher environmental biodegradability of UcS is a major drawback for slow release of urea yet it provides an important challenge for large scale production and application on anaerobic farm lands. Hence, in order to reduce biodegradability of UcS, impregnation of UcS with 5–20 wt% of lignin is proposed. Lignin impregnated UcS was buried for a maximum period of 28–64 days under a constructed anaerobic soil environment. Hill’s model predicted that mineralization of UcS by lignin would be reduced by 5.48%. Microbial growth on UcS was inhibited by lignin at the rate of 0.84 day−1. The α-amylase activity was retarded in response to UcS impregnation with lignin at the rate of 810.94 μg h−1 g−1 soil. Lignin also showed improvement in half-life of UcS up to 0.51 days. This work concluded that lignin impregnation was an efficient approach for improvement of UcS through increasing resistance against natural biodegraders.

Granular, Slow-Release Fertilizer from Urea-formaldehyde, Ammonium Polyphosphate, and Amorphous Silica Gel: A New Strategy Using Cold Extrusion

A new granular, slow-release fertilizer prepared by a cold-extrusion strategy (GSRFEx) based on urea-formaldehyde (UF), ammonium polyphosphate (APP), and amorphous silica gel (ASG) was presented. Characterizations showed that there were strong hydrogen-bond interactions and good compatibility among UF, APP, and ASG in GSRFEx. The mechanical properties as well as the slow-release properties of GSRFEx were greatly enhanced after the addition of APP and ASG to UF. Rape pot experiments indicated that GSRFEx could improve N-use efficiency dramatically and thereby facilitate the growth of rape. Importantly, as an economical, effective, and environment-friendly technology, cold extrusion has great potential to be applied in horticulture and agriculture. We hope that our work can offer an alternative method for the design of slow-release fertilizers with desirable properties.

Recent Advances in Edible Polymer Based Hydrogels as a Sustainable Alternative to Conventional Polymers

The over increasing demand of eco-friendly materials to counter various problems, such as environmental issues, economics, sustainability, biodegradability, and biocompatibility, open up new fields of research highly focusing on nature-based products. Edible polymer based materials mainly consisting of polysaccharides, proteins, and lipids could be a prospective contender to handle such problems. Hydrogels based on edible polymer offer many valuable properties compared to their synthetic counterparts. Edible polymers can contribute to the reduction of environmental contamination, advance recyclability, provide sustainability, and thereby increase its applicability along with providing environmentally benign products. This review is highly emphasizing on toward the development of hydrogels from edible polymer, their classification, properties, chemical modification, and their potential applications. The application of edible polymer hydrogels covers many areas including the food industry, agricultural applications, drug delivery to tissue engineering in the biomedical field and provide more safe and attractive products in the pharmaceutical, agricultural, and environmental fields, etc.

Slow-release NPK fertilizer encapsulated by carboxymethyl cellulose-based nanocomposite with the function of water retention in soil

In this study, new slow release fertilizer encapsulated by superabsorbent nanocomposite was prepared by in-situ graft polymerization of sulfonated-carboxymethyl cellulose (SCMC) with acrylic acid (AA) in the presence of polyvinylpyrrolidone (PVP), silica nanoparticles and nitrogen (N), phosphorous (P), and potassium (K) (NPK) fertilizer compound. The prepared materials were characterized by FT-IR, XRD and scanning electron microscopy (SEM) techniques. The incorporation of NPK fertilizer into hydrogel nanocomposite network was verified by results of these analyses. Also, the swelling behavior in various pH and saline solutions as well as water retention capability of the prepared hydrogel nanocomposite was evaluated. The fertilizer release behavior of the NPK loaded hydrogel nanocomposite was in good agreement with the standard of Committee of European Normalization (CEN), indicating its excellent slow release property. These good characteristics revealed that the hydrogel nanocomposite fertilizer formulation can be practically used in agricultural and horticultural applications.