Characterization of coupling autotrophic denitrification with iron cycle bacterium Enterobacter sp. CC76 and its application of groundwater

Optimizing nitrogen removal in constructed wetlands for low C/N ratio wastewater treatment: Insights from fermentation liquid utilization

The inefficient nitrogen removal in constructed wetlands (CWs) can be attributed to insufficient carbon sources for low carbon-to-nitrogen (C/N) ratio wastewater. In this study, sugarcane bagasse fermentation liquid (SBFL) was used as a supplemental carbon source in intermittently aerated CWs to enhance nitrogen removal. The impact of different regulated influent C/N ratios on nitrogen removal and greenhouse gas (GHG) emissions was investigated. Results demonstrated that SBFL addition significantly enhanced the denitrification capacity, resulting in faster NO3--N removal compared to sucrose. Moreover, intermittently aerated CWs significantly improved NH4+-N removal efficiency compared to non-aerated CWs. The highest total nitrogen removal efficiency (98.3 %) was achieved at an influent C/N ratio of 5 in intermittently aerated CWs with SBFL addition. The addition of SBFL resulted in a reduction of N2O emissions by 17.8 %-43.7 % compared to sucrose. All CWs exhibited low CH4 emissions, with SBFL addition (0.035-0.066 mg·m-2h-1) resulting in lower emissions compared to sucrose. Additionally, higher abundance of denitrification (nirK, nirS and nosZ) genes as well as more abundant denitrifying bacteria were shown in CWs of SBFL inputs. The results of this study provide a feasible strategy for applying SBFL as a carbon source to improve nitrogen removal efficiency and mitigate GHG emissions in CWs.

Insight into the potentiality of nano zero-valent iron on enhancing the nitrite accumulation and phosphorus removal performance of endogenous partial denitrification systems

Endogenous partial denitrification (EPD) has drawn a lot of interest due to its abundant nitrite (NO2--N) accumulation capacity. However, the poor phosphate (PO43--P) removal rate of EPD restricts its promotion and application. In this study, the potentiality of various nano zero-valent iron (nZVI) concentrations (0, 20, 40, and 80 mg/L) on NO2--N accumulation and PO43--P removal in EPD systems had been investigated. Results showed that nZVI improved NO2--N accumulation and PO43--P removal, with the greatest nitrate-to-nitrite transformation ratio (NTR) and PO43--P removal rate of 97.74 % and 64.76 % respectively at the optimum nZVI level (80 mg/L). Microbial community analysis also proved that nZVI had a remarkable influence on the microbial community of EPD. Candidatus_Competibacter was contribute to NO2--N accumulation which was enriched from 24.74 % to 40.02 %. The enrichment of Thauera, Rhodobacteraceae, Pseudomonas were contributed to PO43--P removal. The chemistry of nZVI not only compensated for the deficiency of biological PO43--P removal, but also enhanced NO2--N enrichment. Therefore, nZVI had the huge potentiality to improve the operational performance of the EPD system.

Performance and mechanism of simultaneous nitrification and denitrification in zeolite spheres internal loop airlift reactor

An internal loop airlift reactor was constructed with zeolite spheres as biofilm carriers (ZS-ALR), and the performance and mechanism of nitrogen removal were investigated. The results indicated that the TN, NH₄⁺-N and TOC removal efficiencies of ZS-ALR reached 96.12%, 100% and 94.54% under appropriate conditions (HRT of 6-8 h, aeration rates of 80-120 mL/min, C/N ratios of 4-6), and the highest TN removal rate constant was 0.01156 min^-1. Further investigating the influence of ammonia-N concentrations on nitrogen removal and biofilm stability revealed that catabolism was important in TN removal, and the prominent genera for nitrogen removal included Sphaerotilus (42.20%), Flavobacterium (17.47%) and Fusibacter (6.14%). Meanwhile, the abundance of amoA, napA, narG and nosZ genes was markedly influenced by ammonia-N concentrations. The nitrogen removal of ZS-ALR was mainly through ammonia-N adsorption by zeolite spheres and simultaneous nitrification and denitrification by biofilm.

Iron mediated autotrophic denitrification for low C/N ratio wastewater: A review

In recent years, iron mediated autotrophic denitrification has been a concern because it overcomes the absence of organic carbon and has been successfully used in denitrification for low C/N ratio wastewater. However, there is currently a lack of a more systematic summary of iron-based materials that can be used for denitrification, and no detailed overview about the mechanism of iron mediated autotrophic denitrification has been reported. In this study, the iron materials with different valence states that can be used for denitrification were summarized, and emphasized, as well as the mechanism in different interaction systems were emphasize. In addition, the contribution of various microorganisms in nitrate reduction were analyzed and the effects of operating conditions and water quality were evaluated. Finally, the challenges and shortcomings of the denitrification process were discussed aiming to find better practical engineering applications of iron-based denitrification.

Effect of hydraulic retention time, ZVI concentration, and Fe2+ concentration on autotrophic denitrification efficiency with iron cycle bacterium strain CC76

The immobilized reactor of iron-reducing bacteria and zero-valent iron (ZVI) integrated system was established. This study has shown that the effects of hydraulic retention times (9, 11, 13 h), ZVI concentrations (2, 4, 6, 8 mg/L), and Fe²⁺ concentrations (5, 10, 15 mg/L) on the denitrification characteristics of iron cycle bacterium strain CC76. The results show that the longer the HRT is, the stronger ability of bacteria to remove nitrate. When ZVI concentration was 4 mg/L and the Fe²⁺ concentration is 15 mg/L, the removal efficiency of nitrate was the highest, reaching the maximum value of 93.02% (1.07 mg/L/h). Since increasing ZVI concentration in a certain range can not only promote chemical reduction but also make use of strain CC76 as an electron donor. Also, the abundance of strain CC76 decreased with the increase of ZVI concentration, which indicated that adding a low concentration of ZVI could reduce the inhibitory effect on bacteria. Hypothesis analysis of principal components showed that a low concentration of ZVI is beneficial to increase nitrate removal rate. Community structure analysis indicated that strain CC76 and related bacteria were the most abundant bacteria in the reactor.

Bioaugmentation of Moving Bed Biofilm Reactor (MBBR) with Achromobacter JL9 for enhanced sulfamethoxazole (SMX) degradation in aquaculture wastewater

This study investigated whether bioaugmentation improves sulfamethoxazole (SMX) degradation and nitrogen removal in the Moving Bed Biofilm Reactor (MBBR) system. The effects of the C/N ratio on SMX degradation and nitrogen removal were also evaluated. Using MBBR system operation experiments, the bioaugmented reactor was found to perform more effectively than the non-bioaugmentation reactor, with the highest SMX, nitrate-N, and ammonia-N removal efficiencies of 80.49, 94.70, and 96.09%, respectively. The changes in the sulfonamide resistance genes and bacterial communities were detected at various operating conditions. The results indicate that the diversity of the bacterial communities and the abundance of resistance genes were markedly influenced by bioaugmentation and the C/N ratio, with Achromobacter among the dominant genera in the MBBR system. The bio-toxicity of samples, calculated as the inhibition percentage (IP) toward Escherichia coli, was found to decrease to non-toxic ranges after treatment.

Application of biogenic iron precipitation by strain H117 for tetracycline removal: mechanism of adsorption and activation

To date, biogenic metals have opened up a window for new applications in adsorption of contaminants. But there is still little attention to be paid in the removal of tetracycline (TC) by biogenic iron precipitation (BIP). In this paper, the BIP, from iron-based mixotrophic denitrification batch reactor, was estimated for its adsorption property of TC under various parameters to simulate the behavior in aquatic environment. The maximum adsorption capacity for TC was 195.336 mg g^-1. Analyses of spectrum verified the existence of Fe₃O₄ and FeOOH in BIP, which was the main reason for the removal of TC. The adsorption kinetic and isotherm of TC were well fitted to Elovich and Langmuir isotherm models, respectively, indicating that the adsorption process was mainly controlled by chemical adsorption. Furthermore, we proposed a potential mechanism of adsorption: a combination of cation-π, hydrogen bonding (H-bonding), and electrostatic interaction. Additionally, the activation experiment showed that BIP could enhance the degradation of TC (more than 98.00% removal within 1.0 h) by advanced oxidation process (AOP), due to the existence of FeOOH and Fe₃O₄. Considering its effectiveness in both adsorption and activation performance, BIP is highlighted as an economical and eco-friendly material for TC removal and offers a promising method to resolve sludge disposal in biological treatment of iron-rich groundwater.

Isolation and characterization of an acid and metal tolerant Enterobacter cloacae NZS strain from former mining lake in Selangor, Malaysia

Background

Metal polluted environments have been found to harbor acid and metal tolerant bacterial communities. Metal oxidizing bacteria in particular are industrially important microorganisms that can be utilized for potential applications in biomining and bioremediation. However, some well-characterized strains are not readily culturable as they are obligate and fastidious chemolithotrophs requiring special techniques for their cultivation. Hence, this study was aimed at isolating, identifying, and characterizing indigenous metal tolerant heterotroph(s) from abandoned mines that can potentially be used for biomining or bioremediation processes in the future.

Results

Seventeen bacteria from former mining lakes were isolated and identified using 16S rRNA. Minimal inhibition concentration (MIC) and growth study of isolated bacteria carried out in Luria-Bertani media containing three different metals ions, zinc (II), copper (II), and iron (II), showed that a particular isolate termed Enterobacter cloacae NZS was found to exhibit better growth and tolerance for copper (up to 90 mM), zinc (up to 200 mM), and iron (up to 170 mM). Growth of the strain was notably well in the presence of iron (II). Compared to all the isolates, only E. cloacae NZS was able to be enumerated at pH lower than 5 while other strains were culturable only at pH 7. Its capability in iron (II) oxidation was preliminary assessed based on the pH, cell count, glucose consumption, and amount of iron oxidized throughout incubation in 9K media. E. cloacae NZS strain was found to be capable of oxidizing iron (II) supplied in 9K media to iron (III).

Conclusion

As preliminary investigation showed that E. cloacae NZS was able to oxidize iron (II) in 9K media at pH2, further optimization on the strain, medium, and culture conditions in future may be able to provide a better insight on this strain to be possibly used as an iron oxidizer for various applications.

Simultaneous sulfamethoxazole biodegradation and nitrogen conversion by Achromobacter sp. JL9 using with different carbon and nitrogen sources

This study investigated sulfamethoxazole (SMX) biodegradation and nitrogen conversion by Achromobacter sp. JL9 using different carbon and nitrogen sources. Results showed that SMX and sodium acetate could be co-metabolized as carbon sources for bacterial growth and nitrogen conversion with highest removal efficiencies of 82.44%, 80.2%, and 79.45% for NH₄⁺-N, NO₃^--N, and SMX, respectively. Strain JL9 was able to utilize SMX as its sole nitrogen source for growth, with an SMX biodegradation efficiency of 63.10%. In addition, carbon and nitrogen balance analyses showed that approximately 35.31% and 63.22% of carbon and nitrogen, respectively, were lost as gaseous products. Finally, medium toxicity gradually decreased during the carbon and nitrogen dependence experiments. This study, thus, suggests that carbon and nitrogen play vital roles in SMX biodegradation and biotoxicity reduction.

Characterization of Aerobic Denitrifying Bacterium Pseudomonas mendocina Strain GL6 and Its Potential Application in Wastewater Treatment Plant Effluent

To remove nitrate in wastewater treatment plant effluent, an aerobic denitrifier was newly isolated from the surface flow constructed wetland and identified as Pseudomonas mendocina strain GL6. It exhibited efficient aerobic denitrification ability, with the nitrate removal rate of 6.61 mg (N)·L⁻¹·h⁻¹. Sequence amplification indicated that the denitrification genes napA, nirK, norB, and nosZ were present in strain GL6. Nitrogen balance analysis revealed that approximately 74.5% of the initial nitrogen was removed as gas products. In addition, the response surface methodology experiments showed that the maximum removal of total nitrogen occurred at pH 7.76, C/N ratio of 11.2, temperature of 27.8 °C, and with shaking at 133 rpm. Furthermore, under the optimized cultivation condition, strain GL6 was added into wastewater treatment plant effluent and the removal rates of nitrate nitrogen and total nitrogen reached 95.6% and 73.6%, respectively. Thus, P. mendocina strain GL6 has high denitrification potential for deep improvement of effluent quality.

Performance of the dominant bacterial species and microbial community in autotrophic denitrification coupled with iron cycle in immobilized systems

We used three stable reactors to investigate the rates of nitrate removal coupled with iron cycle and the subsequent influence of the reaction on bacterial communities. The iron-reducing bacterium Klebsiella sp. FC61 was immobilized on the reactor columns of the experimental groups B (only Klebsiella) and C (Klebsiella+magnetite). With the fluctuation of Fe²⁺ to Fe3⁺ (iron cycle), the average nitrate removal efficiency increased from 73.22% to 93.91% and 86.92% to 97.84% in groups B and C, respectively, as the influent nitrate concentration decreased from 40 to 10mg/L. However, the average rate of nitrate removal showed the opposite trend (from 2.08mg/L/h to 0.67mg/L/h and 2.41mg/L/h to 0.69mg/L/h in groups B and C, respectively) as the influent nitrate concentration decreased. Analysis of microbial distribution and community structures indicated that the population of Klebsiella sp. increased in groups B (from 18.21% to 41.21%) and C (from 25.43% to 46.80%) and contributed to the effective removal of nitrate in the reactors.