Effect of different drying methods on total bioactive compounds, phenolic profile, in vitro bioaccessibility of phenolic and HMF formation of persimmon

Unlocking the potential of persimmons: A comprehensive review on emerging technologies for post-harvest challenges, processing innovations, and prospective applications

Persimmons are widely acknowledged as a valuable source of both medicinal and nutritional components, providing a diverse spectrum of nutrients and phytochemicals. Despite these benefits, biases against persimmons persists due to their characteristic astringent flavor that sets them apart from other fruits. Although several studies have explored various aspects of persimmons, a comprehensive review that addresses post-harvest challenges, processing innovations, and potential applications is notably absent in the literature. This review aims to fill this gap by discussing a range of topics, including emerging preservation technologies, methods for detecting and eliminating astringency, identification of functional elements, health-promoting prospects, and advancements in processed persimmon products. The primary objective is to enhance the utilization of persimmons and promote the development of diverse, customized products, thereby fostering the emergence of functional and futuristic foods.

Insight into the changes in active metabolite profiles of noni (Morinda citrifolia L.) fruit subjected to different drying treatments

Noni fruit is renowned for its abundance of bioactive compounds. Drying is an important method for processing functional products derived from noni. However, limited information exists on how drying methods affect the active metabolite profiles of noni fruit. This study investigated the impact of four common drying methods, including hot-air drying (HAD), vacuum freeze drying (VFD), microwave drying (MWD), and far infrared drying (FID), on the physicochemical indexes, bioactive components, and functional properties of dried noni fruit slices using targeted and untargeted metabonomics analysis. The results showed significant variations in appearance, water migration, and microstructure of dried noni fruit slices subjected to the four drying methods. VFD treatment yielded better dried noni fruit products when compared to other drying methods. The superiority of VFD treatment was due to its uniform stratification, reduced collapse, better retention of bioactive components and antioxidants, and higher enzyme inhibitory rates. These findings suggest that VFD method is ideal for obtaining premium bioactive profiles and maintaining the biological activity of noni fruit.

Effect of the ripening stage on the pulsed vacuum drying behavior of goji berry (Lycium barbarum L.): Ultrastructure, drying characteristics, and browning mechanism

In current work, the effect of ripening stages (I, II, and III) on pulsed vacuum drying (PVD) behavior of goji berry was explored. The shortest drying time of goji berry was observed at stage I (6.99 h) which was 13.95 %, and 28.85 % shorter than those at stages II, and III, respectively. This phenomenon was closely associated with the ripening stage, as contributed by the initial physiochemical differences, ultrastructure alterations, and moisture distribution. In addition, lower maturity suffered more severe browning, primarily due to the enzymatic and non-enzymatic reactions of phenolics, followed by pigment degradation and the Maillard reaction. Additionally, the PVD process promoted the rupture and transformation of the pectin fractions, also causing browning either directly or indirectly through participation in other chemical reactions. These findings suggest that the appropriate ripening stage of goji berry should be considered as having a significant impact on drying behaviors and quality attributes.

Comparative elucidation of bioactive and antioxidant properties of red dragon fruit peel as affected by electromagnetic and conventional drying approaches

The effects of near-infrared (NIRD), mid-infrared (MIRD), far-infrared (FIRD), microwave (MWD), and hot air drying (HAD) on drying kinetic, colour, phytochemical composition, and antioxidant activity of red dragon fruit peel (RDFP) was evaluated. Results indicated that drying methods induced varying microstructural and chemical changes on RDFP, significantly influencing moisture removal rates and phytochemical retention. The lowest drying time was observed for MWD, while MIRD presented the highest drying time. FIRD drying was more favourable for retaining TPC, TFC, betacyanin and betaxanthin, while the ascorbic acid content was better retained during MIRD and NIRD. Enhancements in ABTS, CUPRAC and reducing power were associated with FIRD, and NIRD and MIRD enhanced DPPH and HRSA. Overall, chemical modifications induced by drying improved the phytochemical and antioxidant properties but presented adversative effects on ascorbic acid and DPPH. The study presented an essential background for the optimal drying of RDFP.

Effects of Different Drying Methods on Drying Characteristics, Microstructure, Quality, and Energy Consumption of Apricot Slices

An appropriate drying method is crucial for producing high-quality dried apricots. In this study, the effects of four drying methods, hot air drying (HAD), infrared drying (IRD), pulse vacuum drying (PVD), and vacuum freeze-drying (VFD), on the drying kinetics and physical and nutritional characteristics of apricot slices were evaluated. PVD required the shortest time (16.25 h), followed by IRD (17.54 h), HAD (21.39 h), and VFD (34.64 h). VFD resulted in the best quality of apricot slices, with the smallest color difference (ΔE = 13.64), lowest water activity (0.312 ± 0.015) and browning degree (0.35), highest color saturation (62.84), lowest hardness (8.35 ± 0.47 N) and shrinkage (9.13 ± 0.65%), strongest rehydration ability (3.58 ± 0.11 g/g), a good microstructure, and high nutrient-retention rates (ascorbic acid content: 53.31 ± 0.58 mg/100 g, total phenolic content: 12.64 ± 0.50 mg GAE/g, and carotenoid content: 24.23 ± 0.58 mg/100 g) and antioxidant activity (DPPH: 21.10 ± 0.99 mmol Trolox/g and FRAP: 34.10 ± 0.81 mmol Trolox/g). The quality of PVD-treated apricot slices was second-best, and the quality of HAD-treated apricot slices was the worst. However, the energy consumption required for VFD was relatively high, while that required for PVD was lower. The results of this study provide a scientific basis for the large-scale industrial production of dried apricots.

Assessment of freeze, continuous, and intermittent infrared drying methods for sliced persimmon

Persimmons contribute positively to human health. Although off-season utilization typically presents a challenge due to permissions' perishable nature, it may become feasible through the implementation of appropriate drying methods. In this study, round sliced samples were dried to assess drying kinetics, modeling potential, color attributes, rehydration capacity, energy consumption (EC), cost index, and thermal properties. The fruits were subjected to distinct drying methodologies including freeze-drying, continuous infrared drying (300, 400, and 500 W), and intermittent infrared drying (PR = 1 [continuous], PR = 2 [30 s on-30 s off], and PR = 3 [20 s on-40 s off]). The duration of the drying process ranged from 40 to 390 min. It was determined that the most suitable models for depicting continuous and infrared drying kinetics of persimmon fruit were the Midilli et al. and Page models, whereas the Logarithmic model was identified as the optimal choice for characterization of freeze-drying kinetics. Assessment of EC revealed that both intermittent and continuous infrared drying methods incurred lower energy expenditure in comparison to the freeze-drying technique. Remarkably, throughout the course of the infrared drying processes, product surface temperatures varied between 106.33 and 22.65°C across different treatments. Despite its high EC, it has been found that high-quality products are produced by freeze-drying. However, infrared and intermittent infrared applications can be a low energy cost and feasible method for drying persimmon with a shorter duration. PRACTICAL APPLICATION: Persimmon is an important fruit with high nutritional value. However, as with many fresh products, they have a short shelf life. Within the scope of this research, three different drying methodologies were employed in the desiccation of persimmon specimens, and the impact of these methodologies on the overall qualitative attributes of the persimmon product was investigated. Despite its elevated energy consumption, the freeze-drying approach was found to yield high-quality products. Moreover, it was discerned that infrared drying represented a viable and expeditious alternative for drying the fruit, particularly when executed intermittently.

The Effects of Different Drying Methods on the In Vitro Bioaccessibility of Phenolics, Antioxidant Capacity, and Morphology of European Plums (Prunes domestica L.)

Four different drying methods, hot-air-drying (HAD), vacuum-drying (VD), ultrasound-assisted vacuum-drying (US-VD), and freeze-drying (FD), were used to obtain dried plums (Prunes domesticaL.). These prunes were evaluated for their physical properties (such as color, rehydration ratio, and microstructural properties), phenolic compounds, and antioxidant activities before and after being subjected to in vitro digestion. TPC (total phenolic content) of plums ranged from 196.84 to 919.58 mg of GAE (gallic acid equivalent)/100 g of dw, and neochlorogenic acid was the most abundant phenolic compound. FD prunes had the highest levels of phenolics, whereas US-VD caused the most significant loss. During in vitro digestion, the phenolics were present at higher levels at the gastric medium but failed to maintain their stability at the small intestinal stage. Among the samples, FD along with HAD prunes exhibited a higher bioaccessibility index for most of the phenolic compounds. The ratios of TPC, TFC (total flavonoid content), and individual phenolics determined in the digested residues to the initial values of the undigested samples ranged from 0.23 to 31.03%. It could be concluded that the majority of the phenolics were extracted during digestion. Our findings showed that the different drying methods would alter the microstructure, which would affect the extractability and release of phenolics in the simulated digestion model.

Comparison of different drying methods for bergamot peel: Chemical and physicochemical properties

This study examines the effectiveness of seven drying methods applied to bergamot peels, encompassing hot air, microwave, infrared-assisted microwave, freeze, infrared, sun, and oven drying. All samples exhibited moisture content and water activity levels within the acceptable range for dry foods. All methods effectively transformed the peels into powdered form, yielding comparable results. Each method offers distinct advantages and disadvantages, and the choice of method should be based on the desired properties of the final product. The highest ascorbic acid content was found in freeze-dried and hot air-dried samples (>400 mg/100 g), whereas sun-dried samples had the lowest (89.58 mg/100 g). Infrared-dried samples exhibited the highest levels of total phenolics and flavonoids (193.40 and 530.14 mg/100 g, respectively), attributed to reactions induced by elevated temperatures. The total carotenoids were higher in freeze-dried samples (54.12 mg/100 g) compared to other drying methods (<27 mg/100 g). Microwave-dried samples had the highest 5-hydroxymethylfurfural content (73.06 mg/100 g), and freeze-dried samples had the highest naringin content (1568.70 mg/100 g). Although infrared drying had good particle density, porosity, and fluidity, freeze-drying was the most effective, retaining the highest levels of bioactive compounds. Among the methods studied, freeze-drying is recommended due to its superior ability to preserve bioactive compounds. Infrared and infrared-assisted drying methods were suitable for recovering phenolics from bergamot waste, offering lower energy consumption and practical preservation of physicochemical properties. This study emphasizes the importance of selecting the appropriate drying method to ensure high-quality dried food and producing value-added products from bergamot waste, contributing to sustainable agriculture and waste reduction. PRACTICAL APPLICATION: This study demonstrates that infrared and freeze-drying are the most effective methods for producing high-quality bergamot peel samples with enhanced antioxidant properties. These findings hold promising implications for the food industry, offering a viable approach to preserve bergamot peels and their valuable attributes.

Dehydration-rehydration vegetables: Evaluation and future challenges

In this review, the rehydration kinetics model, the quality factors affecting of vegetables during rehydration process, the future challenges and development direction of rehydration process were comprehensively analyzed. Based on the fitting equation for the change in moisture content during rehydration, a suitable rehydration model can be selected to describe the rehydration process of vegetables. Optimal pre-treatment, drying and rehydration methods were selected by considering quality, energy consumption and environmental aspects, and new technologies were developed to improve the quality characteristics of rehydrated vegetables. It is necessary to classify vegetables according to their shape and type to establish the criteria of rehydration processing through mathematical modeling. Industrial production from pre-treatment to product packaging will be precisely adjusted through process parameters. Furthermore, improvements the quality of rehydrated vegetables can be considered in terms of the structural and compositional aspects of the cell wall and cell membrane.

The impact of different drying methods on the physical properties, bioactive components, antioxidant capacity, volatile components and industrial application of coffee peel

This study evaluated the effects of hot air drying (HAD), microwave drying (MD), vacuum drying (VD), sun drying (SD) and vacuum freeze drying (VFD) on the physical properties, bioactive components, antioxidant capacity, volatile components and industrial application of coffee peel. The results showed VFD could retain the appearance color, total phenolics (19.49 mg GAE/g DW), total flavonoids (9.65 mg CE/g DW), caffeine (3.15 mg/g DW), trigonelline (2.71 mg/g DW), and antioxidant capacities of fresh sample to the greatest extent, but its operating cost was significantly higher than other treatments and total volatile components were in the minimum levels. HAD and SD exhibited the highest loss rates of total phenols and antioxidant capacities, exceeding 50%. MD offered the lowest operating cost, superior retention of bioactive components, and the richest variety and quantity of volatile compounds. Therefore, it is recommended to use MD to dehydrate the coffee peel in actual production.

Effect of Extraction Methods on the Antioxidant Potential and Cytotoxicity of the Combined Ethanolic Extracts of Daucus carota L., Beta vulgaris L., Phyllanthus emblica L. and Lycopersicon esculentum against Gastric Adenocarcinoma Cells

Frequent consumption of fruits and vegetables in the daily diet may alleviate the risk of developing chronic diseases. Daucus carota L. (carrot), Beta vulgaris L. (beetroot) Phyllanthus emblica L. (amla), and Lycopersicon esculentum M (tomatoes) are traditionally consumed functional foods that contain a high concentration of antioxidants, ascorbic acid, polyphenols, and numerous phytochemicals. This study assessed how three distinct preparation methods affect the phenolic, flavonoid, carotenoid, and ascorbic acid contents, antioxidant level, and cytotoxicity of the combined fruit extract. The fruit samples were taken in the ratio of carrot (6): beetroot (2): tomato (1.5): amla (0.5) and processed into a lyophilized slurry (LS) extract, lyophilized juice (LJ) extract, and hot-air oven-dried (HAO) extract samples. The sample extracts were assessed for their phytoconstituent concentrations and antioxidant and cytotoxic potential. The total phenolic content in LS, LJ, and HAO extracts was 171.20 ± 0.02, 120.73 ± 0.02, and 72.05 ± 0.01 mg gallic acid equivalent/100 g, respectively and the total flavonoid content was 23.635 ± 0.003, 20.754 ± 0.005, and 18.635 ± 0.005 mg quercetin equivalent/100 g, respectively. Similarly, total ascorbic acid content, carotenoids, and antioxidant potential were higher in the LS and LJ extracts than in HAO. Overall, the LS extract had a substantially higher concentration of phytochemicals and antioxidants, as well as higher cytotoxic potential, compared to the LJ and HAO extracts. The LS extract was tested in the MKN-45 human gastric cancer cell line to demonstrate its effective antioxidant potential and cytotoxicity. Hence, lyophilization (freezing) based techniques are more effective than heat-based techniques in preserving the phytoconstituents and their antioxidant and cytotoxic potential.

Influence of Different Drying Methods on Anthocyanins Composition and Antioxidant Activities of Mangosteen (Garcinia mangostana L.) Pericarps and LC-MS Analysis of the Active Extract

Mangosteen pericarps (MP) often end up as agricultural waste despite being rich in powerful natural antioxidants such as anthocyanins and xanthones. This study compared the effect of different drying processes and times on phenolic compounds and antioxidant activities of MP. Fresh MP were subjected to 36 and 48 h of freeze-drying (-44 ± 1 °C) and oven-drying (45 ± 1 °C), and 30 and 40 h of sun-drying (31 ± 3 °C). The samples were analyzed for anthocyanins composition, total phenolic content (TPC), total flavonoid content (TFC), antioxidant activities, and color characteristics. Analysis of liquid chromatography-mass spectrometry (LC-MS) with electrospray ionization identified two anthocyanins in MP: cyanidin-3-O-sophoroside and cyanidin-3-O-glucoside. Overall, the drying process, time, and their interactions significantly (p < 0.05) influenced the phenolic compounds, antioxidant activities, and color in MP extracts. Both freeze-drying after 36 h (FD36) and 48 h (FD48) possessed significantly (p < 0.05) higher total anthocyanins (2.1-2.2 mg/g) than other samples. However, FD36 was associated with significantly (p < 0.05) higher TPC (~94.05 mg GAE/g), TFC (~621.00 mg CE/g), and reducing power (~1154.50 μmol TE/g) compared to FD48. Moreover, FD36 is more efficient for industrial applications due to less time and energy consumption. Subsequently, obtained dried MP extracts could be further utilized as an alternative to synthetic food colorants.

Development and characterization of a novel sodium alginate based active film supplemented with Lactiplantibacillus plantarum postbiotic

In this study, sodium alginate based biodegradable films were prepared by the supplementation with postbiotics of Lactiplantibacillus plantarum subsp. plantarum (L. plantarum) W2 strain and the effect of probiotics (probiotic-SA film) and postbiotics (postbiotic-SA film) incorporation on physical, mechanical (tensile strength and elongation at break), barrier (oxygen and water vapor permeability), thermal and antimicrobial properties of the films were investigated. The pH, titratable acidity and brix of the postbiotic was 4.02, 1.24 % and 8.37, respectively while gallic acid, protocatechuic acid, myricetin and catechin were the major phenolic compounds. Mechanical and barrier properties of the alginate-based films were improved by probiotic or postbiotic supplementation while postbiotic showed a more pronounced (P < 0.05) effect. Thermal analysis showed that postbiotics supplementation increased thermal stability of the films. In FTIR spectra, the absorption peaks at 2341 and 2317 cm^-1 for probiotic-SA and postbiotic-SA edible films confirmed the incorporation of probiotics/postbiotics of L. plantarum W2 strain. Postbiotic supplemented films showed strong antibacterial activity against gram-positive (L. monocytogenes, S. aureus and B. cereus) and one gram-negative bacterial strain (E. coli O157:H7) while probiotic incorporation did not add an antibacterial effect to the films. SEM images revealed that the supplementation of postbiotics provided a rougher and rigid film surface. Overall, this paper brought a new perspective for development of novel active biodegradable films by incorporation of postbiotics with improved performance.

Capsaicin Rich Low-Fat Salad Dressing: Improvement of Rheological and Sensory Properties and Emulsion and Oxidative Stability

This study aimed to investigate the potential use of cold-pressed hot pepper seed oil by-product (HPOB) in a low-fat salad dressing to improve its rheological properties, emulsion, and oxidative stability. The total phenolic content (TPC), the 2,2-Diphenyl-1-picrylhydrazyl (DPPH) radical scavenging activity, and CUPRIC reducing antioxidant capacity (CUPRAC) values were 317.4 mg GAE/100 g, 81.87%, and 6952.8 mg Trolox/100 g, respectively. The capsaicin, dihydrocapsaicin, and total carotenoid content were 175.8 mg/100 g, 71.01 mg/100 g, and 106.3 µg/g, respectively. All emulsions indicated shear-thinning, viscoelastic solid-like behavior, and recoverable characteristics, which were improved via enrichment with HPOB. The thermal loop test showed that the low-fat sample formulated with 3% HPOB indicated little change in the G* value, showing that it exhibited high emulsion stability. The induction period values (IP) of the salad dressing samples containing HPOB (between 6.33 h and 8.33 h) were higher than the IP values of the control samples (3.20 h and 2.58 h). The enrichment with HPOB retarded the formation of oxidative volatile compounds of hexanal, nonanal, and 1-octene-3-ol. According to the results presented in this study, HPOB could be effectively used in a low-fat salad dressing to enhance its rheological characteristics and oxidative stability.

In vitro and in vivo bioaccessibility, antioxidant activity, and color of red radish anthocyanins as influenced by different drying methods

This study aims to examine the effects of various drying methods, namely vacuum freeze drying (VFD), vacuum drying (VD), hot air drying (HAD), sun drying (SD), and air-impingement jet drying (AIJD), on in vitro and in vivo bioaccessibility of red radish anthocyanins. By color parameters, VFD- and AIJD-dried red radish showed redder color to HAD-, SD-, and VD-dried red radish. SEM images of dried red radish showed multiple holes and loose interior structure. Forty-six anthocyanins were identified in red radish. Original, in vitro and in vivo digestive samples from VFD-dried red radish contained more anthocyanins and were more bioaccessibility than fresh and other dried red radishes. In vitro and in vivo research revealed that dried red radish showed weaker and stronger FRAP and ABTS^·+ scavenging activities than fresh red radish. Colon content of mice had significantly higher FRAP and ABTS^·+ scavenging activities than the stomach, small intestine, and cecum contents.

Based on quality, energy consumption selecting optimal drying methods of mango slices and kinetics modelling

Mangoes have a short shelf life because of their high-water content. This study aimed to compare the effect of three drying methods (HAD, FIRD and VFD) on mango slices to improve product quality and reduce costs. Mangoes were dried at various temperatures (50, 60, 70 °C) with different slice thicknesses (3, 5, 7, 10 mm). Results indicated that FIRD was the most cost-effective with the dried mango containing the highest sugar-acid ratio, and when the mango slices thickness was 7 mm and drying at 70 °C, the ascorbic acid content, rehydration ratio, sugar-acid ratio, and energy consumption per unit volume reached 56.84 ± 2.38 mg/100 g, 2.41 ± 0.05, 83.87 ± 2.14, and 0.53 kWh/L. Among three mathematical models, the Page model described the most satisfactory drying behaviour of mango slices in FIRD. This study provides useful information in mango processing industry and FIRD is supposed to be a promising drying method.

Revealing color change and drying mechanisms of pulsed vacuum steamed Cistanche deserticola through bioactive components, microstructural and starch gelatinization properties

Cistanche deserticola is a famous herbal medicine and has been used worldwide for its kidney-tonifying and anti-aging values. This study investigated the effects of pulsed vacuum steaming (PVS) on bioactive phenylethanoid glycosides (PhGs), total soluble sugars, polysaccharides, color, drying characteristics, microstructure, and starch gelatinization properties of Cistanche deserticola. PVS pretreatment significantly increased PhGs and soluble sugar content while reduced the polysaccharides content. And increasing the material core temperature to 75 °C at the largest diameter was proposed as the optimal steaming condition and the PhGs content was increased by 1.11 times compared with that by atmospheric steaming. The color of steamed samples changed to oily black due to Maillard reaction. PhGs content was significantly (P < 0.05) positively correlated with total color difference (ΔE). Steaming until the ΔE value of 15.95 could achieve the maximum accumulation of PhGs, corresponding to the highest increasing ratio of echinacoside and acteoside. Starch was completely gelatinized and formed a barrier layer adhering to the cell surface when the material core temperature reached 75 °C at the largest diameter, explaining why after steaming the Cistanche deserticola drying time was prolonged by 85.71 %. The study can provide an innovative steaming technology and optimal process parameters for obtaining high-quality Cistanche deserticola decoction pieces, as well as propose a non-destructive testing method to quickly predict PhGs content based on color parameters during the steaming process.

Thermoultrasound and microwave-assisted freeze-thaw pretreatments for improving infrared drying and quality characteristics of red dragon fruit slices

The effects of thermoultrasound (US-FT), microwave (MW-FT), and room temperature (RT-FT) freeze-thaw pretreatments were evaluated for improving drying kinetics and quality during infrared drying (IRD) of red dragon fruit slices (RDFS). Results indicated that microstructural alterations induced by the different pretreatments improved the moisture removal rate and effective diffusivity, and significantly reduced the drying time. US-FT pretreatments prompted more efficient drying and presented an overall enhancement in the quality of RDFS, particularly at low temperatures of 25 and 50 ℃, while enhancements in TFC, FRAP, and CUPRAC were associated with RT-FT. High-power (500 W) MW-FT pretreatments improved colour and structural properties, while low-power (100, 300 W) improved TPC, TFC, ascorbic acid, betalains, and antioxidant activity. Overall, cellular and chemical alterations prompted by pretreatments improved the drying process but presented adverse effects on betaxanthin. The study presented the fundamental background for improving the IRD of foods from the use of improved thawing approaches during freeze-thaw pretreatments.

Interaction of Different Drying Methods and Storage on Appearance, Surface Structure, Energy, and Quality of Berberis vulgaris var. asperma

Seedless barberry fruit is native small fruit in Iran. To examine the impact of various drying methods and storage on the biochemical attributes (Vitamin C, Anthocyanin, Phenol, pH, TA), color index (a*, b*, L*, ab, and Chroma), drying time, and fruit microstructure (by SEM) of seedless barberry (Berberis vulgaris var. asperma), and effective moisture diffusivity coefficient (D_eff), specific energy consumption (SEC), energy efficiency (EE) of the dryers, this experiment was performed. Drying treatments include microwave (100, 170, and 270 W), oven (60 and 70 °C), cabinet (50 and 70 °C), shade, sun, and fresh samples (control) and storage 6 months after drying (in polyethylene packaging and at a temperature of 5–10 °C). Results showed minimum and maximum drying times (50 min and 696 h), were related to microwave (270 W) and shade methods, respectively. The highest color values were observed in fruits treated with control, shade and sun treatments and the lowest values were observed in cabinet (70 °C) methods. According to the SEM results, microwave significantly affected surface structure of the dried sample compared to others. The findings indicated that the use of artificial drying methods than natural methods (sun and shade) cause a more significant reduction in color indexes, while vitamin C, soluble solids, and anthocyanin were significantly maintained at a high level. Storage reduced anthocyanin content of fruits almost 12%. Moreover, it was discovered EE and SEC values varied in the range of 1.16–25.26% and 12.20–1182 MJ/kg, respectively. D_eff values were higher in microwave 270 W.

Pulsed Vacuum Drying of Persimmon Slices: Drying Kinetics, Physicochemical Properties, Microstructure and Antioxidant Capacity

In order to explore an alternative drying method to enhance the drying process and quality of persimmon slices, pulsed vacuum drying (PVD) was employed and the effects of different drying temperatures (60, 65, 70, and 75 °C) on drying kinetics, color, rehydration ratio (RR), microstructure, bioactive compounds, and the antioxidant capacity of sliced persimmons were investigated in the current work. Results showed that the rehydration ratio (RR) of the samples under PVD was significantly higher than that of the traditional hot air-dried ones. Compared to the fresh samples, the dried persimmon slices indicated a decrease in the bioactive compounds and antioxidant capacity. The total phenolic content (TPC) of PVD samples at 70 °C was 87.96% higher than that of the hot air-dried persimmon slices at 65 °C. Interestingly, at 70 °C, the soluble tannin content and TPC of the PVD samples reached the maximum values of 6.09 and 6.97 mg GAE/g, respectively. The findings in the current work indicate that PVD is a promising drying method for persimmon slices as it not only enhances the drying process but also the quality attributes.

Effects of cutting and drying method (vacuum freezing, catalytic infrared, and hot air drying) on rehydration kinetics and physicochemical characteristics of ginger (Zingiber officinale Roscoe)

The purpose of this study was to discuss the effects of cutting methods (transverse cutting [TC] and longitudinal cutting [LC]) and drying methods (vacuum freeze-drying [FD], hot air drying [HD], catalytic infrared drying [CID]) on rehydration kinetics and physical and chemical characteristics of rehydrated ginger. The research results showed that the rehydration rate and equilibrium moisture content increased with an increase in temperature. LC samples had a higher rehydration rate, while TC samples showed higher equilibrium moisture. Peleg model can fit the rehydration curve of the sample well. The highest coefficient of determination (R2 ) was 0.99, while the sum of squares error and lowest chi-square (χ2 ) was close to zero. Compared with fresh samples, the rehydrated ginger slices had lower gingerol content, total phenol content (TPC), total flavonoid content (TFC), and higher antioxidant activity. The different cutting methods had no significant effect on the physical and chemical properties of rehydrated ginger. In conclusion, TC-CID rehydrated products have better retention of gingerol, TPC, TFC, and antioxidant properties, which was similar to the principal component analysis. PRACTICAL APPLICATION: The results of this study show that transverse cutting combined with catalytic infrared drying is a unique processing technology. Due to the short xylem of transverse cutting ginger, the xylem diameter can be restored during rehydration, the balanced water content was high, and the quality of dried ginger can be restored to the greatest extent. This makes food processors competitive in the operation process and provides better services to consumers.

Newly generated and increased bound phenolic in lychee pulp during heat-pump drying detected by UPLC-ESI-triple-TOF-MS/MS

BACKGROUND

During the thermal processing of fruit, it has been observed for phenolic compounds to either degrade, polymerize, or transfer into macromolecules. In this study, the bound and free phenolic compound composition, content, and phenolic-related enzyme activity of lychee pulp were investigated to determine whether the free phenolic had converted to bound phenolic during heat-pump drying (HPD).

RESULTS

It was found that after HPD, when compared with the fresh lychee pulp (control), the content of bound phenolics of dried lychee pulp had increased by 62.69%, whereas the content of free phenolics of dried lychee pulp decreased by 22.26%. It was also found that the antioxidant activity of bound phenolics had also increased after drying. With the use of high-performance liquid chromatography-tandem mass spectrometry, it was identified that (+)-gallocatechin, protocatechuic aldehyde, isorhamnetin-3-O-rutoside, 3,4-dihydroxybenzeneacetic acid, and 4-hydroxybenzoic acid were newly generated during HPD, when compared with the control sample. After drying, the contents of gallic acid, catechin, 4-hydroxybenzoic acid, vanillin, syringic acid, and quercetin in bound phenolics had also increased, and polyphenol oxidase and peroxidase still showed enzyme activity, which could be related to the conversion of free phenolics to bound phenolics.

CONCLUSION

Overall, during the thermal processing of lychee pulp, the free phenolics weres found to be converted into bound phenolics, new substances were generated, and antioxidant activity was increased. Hence, it was concluded that HPD improved the bound phenolics content of lychee pulp, thus providing theoretical support for the lychee processing industry. © 2021 Society of Chemical Industry.

In Vitro and In Vivo Digestion of Persimmon and Derived Products: A Review

The link between nutrition and health has focused on the strategy of diet-based programs to deal with various physiological threats, such as cardiovascular disease, oxidative stress, and diabetes. Therefore, the consumption of fruits and vegetables as a safeguard for human health is increasingly important. Among fruits, the intake of persimmon is of great interest because several studies have associated its consumption with health benefits due to its high content of bioactive compounds, fiber, minerals, and vitamins. However, during digestion, some changes take place in persimmon nutritional compounds that condition their subsequent use by the human body. In vitro studies indicate different rates of recovery and bioaccessibility depending on the bioactive compound and the matrix in which they are found. In vivo studies show that the pharmacological application of persimmon or its functional components, such as proanthocyanidins, can help to prevent hyperlipidemia and hyperglycemia. Thus, persimmon and persimmon derived products have the potential to be a fruit recommended for diet therapy. This review aims to compile an updated review of the benefits of persimmon and its derived products, focusing on the in vitro and in vivo digestibility of the main nutrients and bioactive compounds.

The retention and bioavailability of phytochemicals in the manufacturing of baked snacks

There is a growing body of evidence supporting the role that phytochemicals play in reducing the risk of various chronic diseases. Although there has been a rise in health products marketed as being "supergrains," "superfood," or advertising their abundance in antioxidants, these food items are often limited to powdered blends, dried fruit, nuts, or seeds, rarely intercepting the market of baked snacks. This is in part due to the still limited understanding of the impact that different industrial processes have on phytochemicals in a complex food matrix and their corresponding bioavailability. This review brings together the current data on how various industrial dehydration processes influence the retention and bioaccessibility of phytochemicals in baked snacks. It considers the interplay of molecules in an intricate snack matrix, limitations of conventional technologies, and constraints with consumer acceptance preventing wider utilization of novel technologies. Furthermore, the review takes a holistic approach, encompassing each stage of production-discussing the potential for inclusion of by-products to promote a circular economy and the proposal for a shift in agriculture toward biofortification or tailored growing of crops for their nutritional and post-harvest attributes.

The roles of soluble poly and insoluble tannin in the enzymatic browning during storage of dried persimmon

The roles of total soluble polyphenols (TSP) and insoluble tannins (IST) in the enzymatic browning during the storage of dried persimmon slices packaged by different methods was studied. The color evolution was comprehensively evaluated within 18 weeks of storage, as well as determination the content variation of TSP, IST, and carotenoids. A series of simulated reactions were conducted to investigate the involvement of TSP and IST in PPO-catalyzed reaction. The results showed that N₂-opaque packaging was a good way to alleviate this browning issue. The IST contributed preponderantly to the browning during the whole storage, while the contribution of TSP was little. And the degradation of carotenoids might be related to the color deterioration in the early storage. The IST participated in PPO-catalyzed reaction directly with the insoluble state. By contrast, only a small amount of TSP participated in PPO-catalyzed browning reaction, since it preferentially interacted with IST.

Infrared Drying Trends Applied to Fruit

Aims: This article seeks to identify the main products to which drying is applied, mainly by infrared, as well as the mathematical models used to evaluate a product.

Background: The drying of agro-industrial products is a very important unitary operation to avoid post-harvest losses.

Objective: This article looks to respond to the following questions: Which raw materials are subjected to far-infrared drying? What are the mathematical models used in the application of far-infrared?

Method: To identify the most focused articles on the topic, we worked with the search equation “TITLE-ABS-KEY (‘infrared drying’) AND fruits AND [LIMIT-TO (SUBJAREA, ‘AGRI’) OR LIMIT-TO (SUBJAREA, ‘ENGI’)],” which was run in the Scopus database for scientific articles.

Result: After knowing the different technologies, more than 23 applications in agro-industrial products were identified. In these applications, it is observed how quality is one of the most important factors in the preservation of dehydrated products; far-infrared drying helps retain sensory quality in products such as sweet potatoes, grapes, Cordyceps militaris, and mangoes.

Conclusion: A common factor that could be found from the articles and patents was the application of this infrared drying technique in fruits and vegetables with high water content, such as kiwi, chives, and mushroom varieties. These articles and patents based their studies on optimizing the technique by varying drying times, temperatures, and pressures, even sometimes combining different drying techniques—all to preserve the organoleptic characteristics of the product, avoiding damage to thermolabile compounds and obtaining a dry food of very good quality, performance, and characteristics.

Combined Hot Air, Microwave, and Infrared Drying of Hawthorn Fruit: Effects of Ultrasonic Pretreatment on Drying Time, Energy, Qualitative, and Bioactive Compounds' Properties

The present study aimed to examine the effect of ultrasonic pretreatment and hot air, microwave–hot-air, infrared–hot air, and freeze-drying on the drying time, specific energy (SE), qualitative properties (i.e., color, shrinkage, and rehydration ratio), and bioactive compounds’ properties (i.e., antioxidant activity, phenolic, and flavonoid contents) of hawthorn fruit. Drying of hawthorn was conducted from 45 min for the ultrasonic + microwave–hot-air drying to 1280 min for the freeze-drying method. The lowest amount of SE was obtained using the ultrasonic-microwave–hot-air drying method, which was 47.57 MJ/kg. The lowest values in color changes (12.25) and shrinkage (17.21%) were recorded for the freeze-drying method, while the highest amounts for these traits were 45.57% and 66.75% in the HA drying, respectively. In general, the use of different drying methods reduces the antioxidant capacity (AC), total phenolic content (TPC), and total flavonoid content (TFC) during processing compared to fresh samples. The highest values for AC, TPC, TFC, and the rehydration ratio were 30.69%, 73.07 mg-GAE/gdw, 65.93 mg-QE/gdw, and 2.02 for the freeze-drying method, respectively.

Nutricosmetic effects of Asparagus officinalis: a potent matrix metalloproteinase-1 inhibitor

This study aimed to investigate the nutricosmetic effect of Asparagus officinalis extracts. The tip and spear of A. officinalis were successively extracted with 95% ethanol. The rutin, phenolic, and flavonoid contents of A. officinalis extracts were investigated. The antioxidant activities were determined by 2,2-azinobis (3-ethylbenzothiazoline-6-sulphonic acid) and a ferric reducing antioxidant power assay. Matrix metalloproteinase-1 (MMP-1), elastase, and hyaluronidase inhibition were determined by in vitro enzyme reaction assay. The cytotoxicity was analyzed on peripheral blood mononuclear cellss. Findings revealed that drying temperature and drying duration had significant effects on the chemical composition and biological activity of A. officinalis extract. A. officinalis tips dried at 50 °C for 24 h contained the (significantly) highest flavonoid and rutin content. The most potent extract was from A. officinalis spears since it possessed the (significantly) highest MMP-1, elastase, and hyaluronidase inhibition rates of 83.4 ± 1.5%, 70.4 ± 4.1%, and 75.2 ± 1.0%, respectively. Interestingly, at the same concentration, the A. officinalis spear extract was more potent in MMP-1 inhibition than oleanolic acid and epigallocatechin gallate, the well-known natural MMP-1 inhibitors. The results show that A. officinalis extract is an attractive source of natural anti-skin-wrinkle ingredients.

Effects of air-impingement jet drying on drying kinetics, color, polyphenol compounds, and antioxidant activities of Boletus aereus slices

The aim of the study is to interpret the effects of air-impingement jet drying (AIJD) on drying kinetics, color, polyphenols, and antioxidation ability of Boletus aereus slices. Page model was most suitable for expressing and predicting AIJD curves of B. aereus slices. The moisture-effective diffusion coefficient of AIJD ranged from 7.8876 × 10^-10 to 2.1426 × 10^-9 m² /s, and AIJD also showed high efficiency due to its low activation energy (45.37 kJ/mol). AIJD is better for B. aereus slices than hot air drying (HAD) in accelerating the drying rate (DR) and shortening drying time, and maintaining color. p-hydroxybenzoic acid, protocatechuic acid, and rutin were identified in B. aereus slices by ultra high-performance liquid chromatography coupled with triple quadrupole mass spectrometry (UHPLC-QqQ-MS). Total polyphenols, flavanone, phenolic acids, and antioxidant activities were significantly lower in dried B. aereus slices than those in fresh B. aereus slices. In AIJD, drying temperature had the greatest effect on the quality of B. aereus slices, and AIJD at 50 °C is the optimum drying condition for B. aereus slices. PRACTICAL APPLICATION: Boletus aereus occurs in many countries all over the world. In this paper, the effect of AIJD on color, polyphenols, and antioxidation ability in B. aereus slices and its drying kinetics were studied. AIJD is an efficient drying method for B. aereus by decreasing its drying time, increasing DR, and protecting the color of B. aereus. These findings have provided important reference basis for people to have a better understanding of AIJD method, which was used to dry B. aereus. This study also provides a new technique for drying B. aereus, which could improve dry efficiency and reduce drying cost.

Effect of drying methods on the gastrointestinal fate and bioactivity of phytochemicals from cocoa pod husk: In vitro and in silico approaches

Cocoa pod husk (CPH) contains many nutraceutical phytochemicals whose gastrointestinal fate and bioactivity can be affected by drying methods. Microwave (MW), forced-air drying (AF), and AF plus extrusion (AF-E) dried CPH samples were chemically characterized, and their phenolic and theobromine (THB) contents were evaluated under oral-gastric-intestinal (in vitro) and colonic fermentation (ex vivo). Absorption, distribution, metabolism, excretion, and toxicity (ADEMT) properties of CPH's small molecules were evaluated in silico. The chemical composition of CPH [mostly carbohydrates/insoluble dietary fiber], polyphenol [total polyphenols > condensed tannin (CT) > monomeric flavonoids] differed minimally among samples, except for THB content (AF/AF-E > MW) and antioxidant capacity (MW > AF/AF-E). Time- trend gastrointestinal (X³ behavior) and colonic bioaccessibility were AF/AF-E > MW, but phenolic acids, procyanidins, and THB fluctuated in a sample-specific fashion. In silico modeling showed that bioactives of CPH easily crossed the intestinal epithelium illustrating their bioaccessibility and, permeability. These bioactives can act as receptor ligands in a structure-dependent manner, suggesting their use as a functional ingredient.