Microplastics abundance and characteristics in surface waters from the Northwest Pacific, the Bering Sea, and the Chukchi Sea

Quantitative tracking of the transformation of micro- and nanoplastics in simulated human body fluid

Micro- and nanoplastics (MNPs) are widespread in the environment and food, posing ingestion risks through various pathways. However, their transformation in human body fluids (SBFs), especially the formation of secondary nanoparticles (NPs), is not well understood due to inadequate quantification methods. This study proposed a robust method for quantifying eight common MNPs using pressurized liquid extraction (PLE) for pretreatment and pyrolysis gas chromatography-quadrupole time-of-flight mass spectrometry (Py-GC-QTOF-MS) for analysis. The method demonstrated high performance with recoveries over 90.9 % and a detection limit down to 0.01 mg/L. Most sample matrices did not interfere with MNP quantification, though poly(3-hydroxybutyrate) and polyethylene required background noise deduction. High recoveries in SBFs (>79.0 %) further confirmed the practicality of this method. Utilizing this method, it was found that only a few MPs were able to release secondary NPs within the simulated digestive system, with the maximum proportion of released NPs less than 2.1 %, suggesting a negligible health risk from secondary NPs. Besides, ester structure was found not to promote the formation of secondary NPs but did affect surface morphology and functional groups to a certain extent. We anticipate that this work will open opportunities for the health risk assessment of MNPs.

Microplastics in seawater and fish acquired from the corresponding fishing zones of the Baltic Sea

Microplastics in seawater and fish from the Baltic Sea were analyzed. The significant contribution of the study is due to extensive collection of fish and surface water samples from corresponding fishing zones. Microplastics were detected in 100 % of seawater and 61 % of fish samples. The abundances of microplastics were 19,984 ± 8858 items/m3 (seawater) and 3.3 items/fish in the fish organs. The average dimension was 1.08 ± 1.19 mm (seawater), and 0.77 ± 0.84 mm (fish). In 106 out of 178 specimens (61 %), MPs were found in the gills (46 %), digestive tract (38 %), or liver (16 %). Fiber was the most dominant shape found in seawater (91.7 %) and fish (68.3 %), while the dominant color of items was blue. Items were mostly composed of polyethylene (21 %), polypropylene (20 %), cellophane (16 %), polyamide (9 %), and polyacrylate (8 %).

Morphometric characteristics and spatiotemporal heterogeneity of microplastics on the north-east coast of India

The study analysed microplastics (MPs) in surface waters along the north-east coast of India and focused on the spatiotemporal distribution and morphometric characteristics of 800 particles for environmental insights. The MPs were consistently present in all water masses, with an average abundance of 0.67 ± 0.66 particles/m3 during the monsoon and 0.12 ± 0.08 particles/m3 post-monsoon. Fragments and fibers were dominant in both seasons, comprising over 83 % and 12 %, respectively. In terms of colours, blue was significantly dominant during the post-monsoon (H, χ2 (5) = 15.38, p < 0.01); however, such variation was absent during the monsoon. Spatially, significant variance in abundance (F4, 34 = 8.542; p < 0.01) and across colours and forms during the monsoon was correlated with land-based inputs from the Hooghly River. FTIR analysis revealed ten polymer types, predominantly polyethylene (44 %). SEM observations indicated that 80 % of particles exhibited polymer ageing from oxidative weathering. The size distribution of MPs varied notably, with a higher proportion of < 0.3 mm (16.7 %) during the monsoon, possibly due to increased particle disintegration. The study noted MPs had low to moderate circularity, with increased irregularity during the monsoon due to heavy precipitation and river flushing. An initial risk assessment of MP pollution in surface waters on the north-east coast revealed a low-risk state. Acrylonitrile butadiene styrene (ABS) was identified as the most hazardous MP polymer. A wide range of toxic trace elements were found in MPs in these waters. The findings from the study deepen our knowledge of MPs and their fate in the pelagic zone, which supports the development of science-based policies that effectively reduce MP pollution.

Microfibre pollution: An emerging contaminant, alarming threat to the global environment

Microfibres, mostly obtained from home laundry, textiles, industrial materials, sewage effluents, and sludge, are considered the main source of environmental pollution, which has become a prevalent threat to terrestrial and aquatic creatures. Global population growth and industrialization have led to a rise in fibre consumption and production, which spread its network in drinking water, beer, and seafood. Focusing on the alarming threat of microfibre towards the natural environment, we have penned an extensive review article about microfibre pollution. The manuscript is divided into various subparts, such as the introductory portion, which briefly summarizes the sources and presence of various hazardous pollutants in the environment, followed by a detailed discussion about microfibre. The second part elaborates on the sources and distribution of microfibreous pollutants and the third portion discloses the toxic chemicals utilized or produced from functionalization, as well as the negative implications of microfibre on the environment. The fourth part discloses the leading application strategies to diminish microfibre pollution by controlling the sources and the development of various remediations. The last portion deals with the future and critical aspects of microfibre contamination. The authors hope this review article will boost its domain in environmental chemistry, sustainable development and environmental engineering from academic to industrial level as it helps researchers in particular and academics in general.

A systematic review to assess current surface water and sediment microplastic sampling practices in seagrass and mangrove ecosystems

Global plastic production is estimated to be 400 million tonnes per annum, with ~ 5.25 trillion fragments floating in our oceans. Microplastics (< 5 mm) have the potential to disproportionately accumulate and become trapped in mangroves and seagrass meadows, creating plastic 'sinks'. This is concerning as these ecosystems are of great ecological and economic importance, with microplastics causing harm to inhabiting flora and fauna. However, accurately measuring microplastic abundance, comparing findings, and determining potential impacts are difficult due to a lack of standardised sampling protocols. Therefore, a systematic literature review was completed to review currently adopted microplastic sampling methods in surface water and sediment in seagrass and mangrove ecosystems. These were compared with recommendations from existing governmental and institutional groups as a first step to standardising methods for future sampling procedures in seagrasses and mangroves.

Natural sorting of sediments in the wave run-up zone works for microplastics as well

The distribution of plastic pollution in the marine environment is highly variable in time and space, making it difficult to assess pollution levels. This study shows that mixing and natural sorting of material in the wave run-up zone of a sandy beach results in a relatively stable abundance of microplastics in the size range 0.5-2 mm (S-MPs). Based on 175 samples collected over 14 months during 42 monitoring surveys at 6 stations along the shore of the Vistula Spit (Baltic Sea), the mean abundance of S-MPs was found to be 64 ± 36 items/kg DW (98.6 % fibers), with a coefficient of variation of only 56 % over more than one year. Statistical tests confirmed its independence from current wind speed, significant wave height, mean sediment grain size, sediment sorting, percentage of certain sand fractions, month, season, or location along the shore. It can therefore be used as a suitable indicator for long-term monitoring of increasing plastic pollution in the marine environment.

Microplastic characterization and assessment of removal efficiency in an urban and industrial wastewater treatment plant with submarine emission discharge

Wastewater treatment plants (WWTPs) are significant contributors to microplastic (MP) pollution in marine ecosystems when they are inefficient. This study aimed to evaluate the effectiveness of microplastic removal from the effluent of the Anza WWTP (Morocco), which processes industrial and urban wastewater using a lamellar decantation system combined with a submarine emissary for treated water discharge. Additionally, this study investigated the presence of microplastics in the Atlantic seawater where treatment plant effluent is released. Microplastics were collected and extracted from wastewater and seawater samples to assess their abundance, shape, size, polymer type, and removal rates in the treatment plant. The findings revealed an average MP concentration of 1114 ± 90 MPs/L in the influent and 607 ± 101 MPs/L in the effluent, indicating a removal efficiency of 46 %. Seasonal analysis revealed the highest MP concentrations during the summer, with 2181.33 MPs/L in the influent and 1209 MPs/L in the effluent. Seawater samples from the discharge zone of the submarine emissary had an average MP concentration of 1600 MPs/m3. Characterization of the MPs revealed that fibers were the most common form of MPs in all the samples. The 500-100 μm size fraction was predominant in the WWTP samples, while MPs smaller than 1 mm were more abundant in the seawater samples. Seven polymer types were identified using attenuated total reflection fourier transform infrared spectroscopy (ATR-FTIR), with PET, PE, PVC, PA, PS, PP, and EVA being the most prevalent. Scanning electron microscopy coupled with energy-dispersive X-ray spectroscopy (SEM/EDX) revealed various degrees of weathering and chemical elements adhering to the MP surfaces. The results of this study provide valuable insights into the effectiveness of conventional treatment systems in removing microplastics and offer a reference for developing management strategies to mitigate MP pollution in Morocco's marine ecosystems.

Spatial distribution of small microplastics in the Norwegian Coastal Current

High concentrations of microplastic (MP) particles have been reported in the Arctic Ocean. However, studies on the high-resolution lateral and vertical transport of MPs from the European waters to the Arctic are still scarce. Here, we provide information about the concentrations and compositions of MPs in surface, subsurface, and deeper waters (< 1 m, ∼ 4 m, and 17-1679 m) collected at 18 stations on six transects along the Norwegian Coastal Current (NCC) using an improved Neuston Catamaran, the COntinuos MicroPlastic Automatic Sampling System (COMPASS), and in situ pumps, respectively. FTIR microscopy and spectroscopy were applied to measure MP concentration, polymer composition, and size distribution. Results indicate that the concentrations of small microplastics (SMPs, <300 μm) varied considerably (0-1240 MP m-3) within the water column, with significantly higher concentrations in the surface (189 MP m-3) and subsurface (38 MP m-3) waters compared to deeper waters (16 MP m-3). Furthermore, the average concentration of SMPs in surface water samples was four orders of magnitude higher than the abundance of large microplastics (LMPs, >300 μm), and overall, SMPs <50 μm account for >80 % of all detected MPs. However, no statistically significant geographical patterns were observed in SMP concentrations in surface/subsurface seawaters between the six sampling transects, suggesting a relatively homogeneous horizontal distribution of SMPs in the upper ocean within the NCC/Norwegian Atlantic Current (NwAC) interface. The Lagrangian particle dispersal simulation model further enabled us to assess the large-scale transport of MPs from the Northern European waters to the Arctic.

A review of plastic debris in the South American Atlantic Ocean coast - Distribution, characteristics, policies and legal aspects

The presence of plastics in the oceans has already become a pervasive phenomenon. Marine pollution by plastics surpasses the status of an emerging threat to become a well-established environmental problem, boosting research on this topic. However, despite many studies on the main seas and oceans, it is necessary to compile information on the South American Atlantic Ocean Coast to identify the lack of research and expand knowledge on marine plastic pollution in this region. Accordingly, this paper conducted an in-depth review of monitoring methods, sampling, and identification of macroplastics and microplastics (MPs) in water, sediments, and biota, including information on legal requirements from different countries as well as non-governmental initiatives. Brazil was the country with the highest number of published papers, followed by Argentina. MPs accounted for 75 % of the papers selected, with blue microfibers being the most common morphology, whereas PE and PP were the most abundant polymers. Also, a lack of standardization in the methodologies used was identified; however, the sites with the highest concentrations of MPs were the Bahía Blanca Estuary (Argentina), Guanabara Bay (Brazil), and Todos os Santos Bay (Brazil), regardless of the method applied. Regarding legislation, Uruguay and Argentina have the most advanced policies in the region against marine plastic pollution due to their emphasis on the life cycle and the national ban on certain single-use plastics. Therefore, considering its content, this expert review can be useful to assist researchers dealing with plastic pollution along the South American Atlantic Ocean Coast.

Does the microplastics ingestion patterns and polymer composition vary across the oceanic zones? A case study from the Indian coast

This study explores microplastic (MP) presence in the gastrointestinal tracts of deep-sea fish from the Central Indian Ocean, off the Indian coast. Among the 27 species examined, 19 showed MP contamination, averaging 2.68 ± 0.30 (±SE) MPs per individual. Polymer analysis via FTIR and micro-Raman identified several types, including polyethylene terephthalate (PET), polyvinyl alcohol (PVA), polypropelene (PP), polyvinyl acetate (PVC), polyurethane (PU), polytetrafluoroethylene (PTFE), polyaniline (PANI), polymethyl methacrylate (PMMA), and polyethersulfone (PES), with PET being the most prevalent (33.33 %). MP ingestion was higher in benthopelagic fish and those at higher trophic levels, as indicated by comparisons across oceanic zones. Niche partitioning analysis suggests feeding behaviour as a primary influencer of MP ingestion in deep-sea fish rather than habitat or trophic level. The study proposes the potential use of deep-sea fish as indicators for assessing microplastic pollution across oceanic zones and deep-sea regions through bycatch monitoring.

Emerging pollutant in surface water bodies: a review on monitoring, analysis, mitigation measures and removal technologies of micro-plastics

Water bodies play a crucial role in supporting life, maintaining the environment, and preserving the ecology for the people of India. However, in recent decades, human activities have led to various alterations in aquatic environments, resulting in environmental degradation through pollution. The safety of utilizing surface water sources for drinking and other purposes has come under intense scrutiny due to rapid population growth and industrial expansion. Surface water pollution due to micro-plastics (MPs) (plastics < 5 mm in size) is one of the emerging pollutants in metropolitan cities of developing countries because of its utmost resilience and synthetic nature. Recent studies on the surface water bodies (river, pond, Lake etc.) portrait the correlation between the MPs level with different parameters of pollution such as specific conductivity, total phosphate, and biological oxygen demand. Fibers represent the predominant form of MPs discovered in surface water bodies, exhibiting fluctuations across seasons. Consequently, present study prioritizes understanding the adaptation, prevalence, attributes, fluctuations, and spatial dispersion of MPs in both sediment and surface water environments. Furthermore, the study aims to identify existing gaps in the current understanding and underscore opportunities for future investigation. From the present study, it has been reported that, the concentration of MPs in the range of 0.2-45.2 items/L at the Xisha Islands in the south China sea, whereas in India it was found in the range of 96 items/L in water samples and 259 items/kg in sediment samples. This would certainly assist the urban planners in achieving sustainable development goals to mitigate the increasing amount of emergent pollutant load.

Understanding microplastic pollution of marine ecosystem: a review

Microplastics are emerging as prominent pollutants across the globe. Oceans are becoming major sinks for these pollutants, and their presence is widespread in coastal regions, oceanic surface waters, water column, and sediments. Studies have revealed that microplastics cause serious threats to the marine ecosystem as well as human beings. In the past few years, many research efforts have focused on studying different aspects relating to microplastic pollution of the oceans. This review summarizes sources, migration routes, and ill effects of marine microplastic pollution along with various conventional as well as advanced methods for microplastics analysis and control. However, various knowledge gaps in detection and analysis require attention in order to understand the sources and transport of microplastics, which is critical to deploying mitigation strategies at appropriate locations. Advanced removal methods and an integrated approach are necessary, including government policies and stringent regulations to control the release of plastics.

The Effects of Rainfall Events on the Composition and Diversity of Microplastics on Beaches in Xiamen City on a Short-Term Scale

Coastal beaches are vulnerable to microplastic pollution originating primarily from terrestrial and marine sources or the in situ weathering of plastic waste. The present study investigates the effects of rainfall events on the composition and diversity of microplastics on beaches in Xiamen City on a short-term scale. In the results, the quantity of microplastics in beach sediments was 245.83 ± 11.61 items·kg-1 (mean ± standard error). The abundance of microplastics did not differ after each rainfall event but significantly decreased after multiple rainfall events. When the diversity of microplastics in the coastal area was evaluated, the Shannon-Wiener index and Pielou's index also decreased from 3.12 and 0.64 to 2.99 and 0.62, respectively, after multiple rainfall events. Rainfall had varying effects on microplastics depending on their size and shape, with particles smaller than 500 μm experiencing pronounced reductions. There was a significant negative correlation between the abundance of microplastics and the grain size of sand, but a positive correlation with sediment moisture content. We encourage the consideration of the potential impact of rainfall events during sample collection to ensure the reliability of the data. We also recommend using diversity indexes to help in understanding the influence of physical processes on microplastic distribution and their mechanisms.

Microplastic and mesoplastic pollution in surface waters and beaches of the Canary Islands: A review

The Canary Archipelago is a group of volcanic islands located in the North Atlantic Ocean with high marine biodiversity. This archipelago intercepts the Canary Current, the easternmost branch of the Azores Current in the North Atlantic Subtropical Gyre, which brings large amounts of litter from remote sources via oceanic transportation. It is, therefore, particularly vulnerable to marine plastic pollution. Here, we present a review of the available studies on mesoplastics and microplastics in the Canary Islands over the last decade to evaluate the level and distribution of plastic pollution in this archipelago. Specifically, we focused on data from beaches and surface waters to assess the pollution level among the different islands as well as between windward and leeward zones, and the main characteristics (size, type, colour, and polymer) of the plastics found in the Canary Islands. The concentrations of meso- and MPs on beaches ranged from 1.5 to 2972 items/m2 with a mean of 381 ± 721 items/m2. The concentration of MPs (>200 μm) in surface waters was highly variable with mean values of 998 × 103 ± 3364 × 103 items/km2 and 10 ± 31 items/m3. Plastic pollution in windward beaches was one order of magnitude significantly higher than in leeward beaches. The accumulation of MPs in surface waters was higher in the leeward zones of the high-elevation islands, corresponding to the Special Areas of Conservation (ZECs) and where the presence of marine litter windrows (MLW) has been reported. Microplastic fragments of polyethylene of the colour category "white/clear/uncoloured" were the most common type of plastic reported in both beaches and surface waters. More studies on the occurrence of MLW in ZECS and plastic pollution in the water column and sediments, including small-size fractions (<200 μm), are needed to better assess the level of plastic pollution and its fate in the Canary Islands. Overall, this review confirms that the Canary Archipelago is a hotspot of oceanic plastic pollution, with concentrations of MPs in surface waters in the highest range reported for oceanic islands and one of the highest recorded mean concentrations of beached meso- and microplastics in the world.

Hotspots of Floating Plastic Particles across the North Pacific Ocean

The pollution of the marine environment with plastic debris is expected to increase, where ocean currents and winds cause their accumulation in convergence zones like the North Pacific Subtropical Gyre (NPSG). Surface-floating plastic (>330 μm) was collected in the North Pacific Ocean between Vancouver (Canada) and Singapore using a neuston catamaran and identified by Fourier-transform infrared spectroscopy (FT-IR). Baseline concentrations of 41,600-102,700 items km-2 were found, dominated by polyethylene and polypropylene. Higher concentrations (factors 4-10) of plastic items occurred not only in the NPSG (452,800 items km-2) but also in a second area, the Papaha̅naumokua̅kea Marine National Monument (PMNM, 285,200 items km-2). This second maximum was neither reported previously nor predicted by the applied ocean current model. Visual observations of floating debris (>5 cm; 8-2565 items km-2 and 34-4941 items km-2 including smaller "white bits") yielded similar patterns of baseline pollution (34-3265 items km-2) and elevated concentrations of plastic debris in the NPSG (67-4941 items km-2) and the PMNM (295-3748 items km-2). These findings suggest that ocean currents are not the only factor provoking plastic debris accumulation in the ocean. Visual observations may be useful to increase our knowledge of large-scale (micro)plastic pollution in the global oceans.

Abundance and characterization of microplastic pollution in the wildlife reserve, Ramsar site, recreational areas, and national park in northern Jakarta and Kepulauan Seribu, Indonesia

This is the first study to evaluate the presence and distribution of microplastics in sediments in the regions with a unique degree of complexity, such as wildlife reserve areas, a Ramsar site that connects directly to Greater Jakarta's mainland, recreational islands, and a marine national park. Microplastics of varying sizes and shapes are found in all places, with an increase trend in the abundance toward areas near to the epicenter of human activity. Comparatively to other marine protected areas, the amount of microplastics discovered is comparable; however, there is an upward trend. Season influences microplastic accumulation, with the dry season causing the greater accumulation. Small-sized microplastics and microplastics resulting from large plastic fragments were predominantly discovered. The properties of microplastics in the study region are dominated by polyethylene, polypropylene, polystyrene, polyvinyl chloride, and nylon. Additional in-depth research and waste reduction from all sources that involve all stakeholders are required to reduce the amount of contaminants entering the protected area.

Analysis of microplastics in ships ballast water and its ecological risk assessment studies from the Persian Gulf

Transport of ballast water is considered a significant vector for dispersion of different pollutants, including microplastics (MPs), throughout the world's oceans. However, there is limited information on MPs in ballast water. Size distribution, polymer type, and ecological risks of MPs in ballast water were investigated for the first time in this study. The mean levels of MPs in ballast water and seawater samples were 12.53 and 11.80 items/L, respectively. MPs with a size category of 50-300 μm was the most abundant. Fiber, black, and polycarbonate (PC) were the predominant shape, color, and polymer type of identified MPs in ballast water and seawater, respectively. The pollution load index (PLI), hazard index (HI), and risk quotient (RQ) indicated high levels of MP pollution, potentially indicating an ecological risk. These findings increase our understanding of the major sources (such as ballast water), transportation routes, and related ecological risks of MPs to marine ecosystems.

Research progress on occurrence characteristics and source analysis of microfibers in the marine environment

Synthetic microfiber pollution is a growing concern in the marine environment. However, critical issues associated with microfiber origins in marine environments have not been resolved. Herein, the potential sources of marine microfibers are systematically reviewed. The obtained results indicate that surface runoffs are primary contributors that transport land-based microfibers to oceans, and the breakdown of larger fiber plastic waste due to weathering processes is also a notable secondary source of marine microfibers. Additionally, there are three main approaches for marine microplastic source apportionment, namely, anthropogenic source classification, statistical analysis, and numerical simulations based on the Lagrangian particle tracking method. These methods establish the connections between characteristics, transport pathways and sources of microplastics, which provides new insights to further conduct microfiber source apportionment. This study helps to better understand sources analysis and transport pathways of microfibers into oceans and presents a scientific basis to further control microfiber pollution in marine environments.

Spatiotemporal profile and ecological impacts of major and trace elements in surface sediments of marginal seas of the Arctic and Northern Pacific Oceans

The status and ecological impacts of sedimentary elements of the marginal seas of Arctic and Northern Pacific Oceans was investigated during 2016 to 2018 by using inductively coupled plasma mass spectrometry. Industrial (0.006 mg kg-1-64.6 g kg-1), precious (0.003-43.8 mg kg-1), rare earth (0.006-112.9 mg kg-1), and heavy metal (0.009-398.9 mg kg-1) elements showed spatial variation, and temporal uniformity. The results indicated ΣREEs and light REEs enrichment compared to chondrite and heavy REEs, respectively, while nonsignificant positive and negative δCe and δEu anomalies existed, respectively. High contamination and extreme enrichment of priority control, industrial (As, Mo, Re, Sb), precious (Au, Ir, Pd, Pt, and Ru) and RE elements indicated potential moderate to high ecological and biological risks. The study highlighted the ecological importance and fragile nature of these ecosystems and calls for an urgent action to ensure sustainability of these ecosystems.

Fasting durations of Steller sea lion pups vary among subpopulations-evidence from two plasma metabolites

Geographic differences in population growth trends are well-documented in Steller sea lions (Eumetopias jubatus), a species of North Pacific pinniped listed under the U.S. Endangered Species Act in 1990 following a marked decline in population abundance that began during the 1970s. As population growth is intrinsically linked to pup production and survival, examining factors related to pup physiological condition provides useful information to management authorities regarding potential drivers of regional differences. During dam foraging trips, pups predictably transition among three fasting phases, distinguished by the changes in the predominant metabolic byproduct. We used standardized ranges of two plasma metabolites (blood urea nitrogen and β-hydroxybutyrate) to assign pups to fasting categories (n = 1528, 1990-2016, 12 subpopulations): Recently Fed-Phase I (digestion/assimilation-expected hepatic/muscle glycogen usage), Phase II (expected lipid utilization), transitioning between Phases II-III (expected lipid utilization with increased protein reliance), or Phase III (expected protein catabolism). As anticipated, the majority of pups were classified as Recently Fed-Phase I (overall mean proportion = 0.72) and few pups as Phase III (overall mean proportion = 0.04). By further comparing pups in Short (Recently Fed-Phase II) and Long (all other pups) duration fasts, we identified three subpopulations with significantly (P < 0.03) greater proportions of pups dependent upon endogenous sources of energy for extended periods, during a life stage of somatic growth and development: the 1) central (0.27 ± 0.09) and 2) western (0.36 ± 0.13) Aleutian Island (declining population trend) and 3) southern Southeast Alaska (0.32 ± 0.06; increasing population trend) subpopulations had greater Long fast proportions than the eastern Aleutian Islands (0.10 ± 0.05; stabilized population). Due to contrasting population growth trends among these highlighted subpopulations over the past 50+ years, both density-independent and density-dependent factors likely influence the dam foraging trip duration, contributing to longer fasting durations for pups at some rookeries.

Distribution Characteristics of Microplastics in Surface Seawater off the Yangtze River Estuary Section and Analysis of Ecological Risk Assessment

Microplastics are widespread in the oceans as a new type of pollutant. Due to the special geographical environment characteristics, the Yangtze River estuary region become hotspot for microplastics research. In 2017 and 2019, surface seawater microplastics samples were collected from five stations off the Yangtze River estuary during four seasons (spring, summer, autumn, and winter). The abundance and characteristics of microplastics in seawater were researched. The results showed that microplastics widely existed in surface seawater; the average abundance of microplastics in seawater was (0.17 ± 0.14) items/m3 (0.00561 ± 0.00462) mg/m3; and accounting for 80% of the total plastic debris, the abundance of microplastics was at moderately low levels compared to national and international studies. The particle size of most microplastics was between 1 mm to 2 mm, accounting for 36.1% of the total microplastics. The main shapes of microplastics were fiber, flake, and line, accounting for 39.5%, 28.4%, and 20.8%, respectively. Polypropylene, polyethylene terephthalate, and polyethylene were the main components of microplastics, accounting for 41.0%, 25.1%, and 24.9%, respectively. Yellow, green, black, and transparent were the most common colors, accounting for 21.9%, 19.6%, 16.5%, and 15.7%, respectively. This study shows that the spatial distribution of microplastics in the surface waters off the Yangtze River estuary shows a decreasing trend from nearshore to farshore due to the influence of land-based inputs, hydrodynamics, and human activities; the distribution of microplastics has obvious seasonal changes, and the level of microplastic pollution is higher in summer. The potential ecological risk of microplastics in the surface waters off the Yangtze River estuary is relatively small.

Microplastic contamination in the dominant crabs at the intertidal zone of Chongming Island, Yangtze Estuary

Crabs are one of the most critical and dominant species of the intertidal zone. Their feeding, burrowing, and other bioturbation activities are common and intense. However, baseline data on microplastic contamination in wild intertidal crabs are still lacking. In this study, we investigated the contamination of microplastics in the dominant crabs, Chiromantes dehaani, of the intertidal zone in Chongming Island, Yangtze Estuary, and explored their probable relationship with the microplastic composition in sediments. A total of 592 microplastic particles were observed in the crab tissues, with an abundance of 1.90 ± 0.53 items·g-1 (1.48 ± 0.45 items·ind-1). The microplastic contamination in the tissues of C. dehaani varied significantly among different sampling sites, organs, and size groups, but not among different sexes. Microplastics in C. dehaani were mainly rayon fibers with small sizes (<1000 μm). Their colors were mostly dark, which is consistent with the sediments samples. A linear regression showed significant correlations between the composition of microplastics in the crabs and that in sediments, although they differed in various crab organs and sediment layers. The target group index identified the feeding preference of C. dehaani on the microplastics with specific shapes, colors, sizes, and polymer types. In general, the microplastic contamination in crabs is affected by both objective environmental conditions and subjective feeding habits of crabs. In the future, more potential sources should be considered to completely distinguish the relationship between the microplastic contamination in crabs and adjacent environment.

Microplastics in stomach contents of juvenile Patagonian blennies (Eleginops maclovinus)

Microplastics are one of the major environmental issues that need to be addressed because they are starting to impact food chains and are also affecting human populations. The size, colour, form, and abundance of microplastics in young blennies of the species Eleginops maclovinus were examined in the current study. While the stomach contents of 70 % of the studied individuals contained microplastics, 95 % of them included fibres. Individual size and the largest particle size that can be eaten, which ranges between 0.09 and 1.5 mm present no statistical correlation. The quantity of particles taken in by each individual does not change with size. The most present microfibers colours were blue and red. Sampled fibres were analysed with FT-IR and no natural fibres were detected, proving the synthetic origin of the detected particles. These findings suggest that protected coastlines create conditions that favour the encounter of microplastics increasing local wildlife exposure to microplastics, raising the danger of their ingestion with potential physiological, ecological, economical and human health consequences.

Microplastics Distribution within Western Arctic Seawater and Sea Ice

Microplastic pollution has emerged as a global environmental concern, exhibiting wide distribution within marine ecosystems, including the Arctic Ocean. Limited Arctic microplastic data exist from beached plastics, seabed sediments, floating plastics, and sea ice. However, no studies have examined microplastics in the sea ice of the Canadian Arctic Archipelago and Tallurutiup Imanga National Marine Conservation Area, and few have explored Arctic marginal seas' water column. The majority of the microplastic data originates from the Eurasian Arctic, with limited data available from other regions of the Arctic Ocean. This study presents data from two distinct campaigns in the Canadian Arctic Archipelago and Western Arctic marginal seas in 2019 and 2020. These campaigns involved sampling from different regions and matrices, making direct comparisons inappropriate. The study's primary objective is to provide insights into the spatial and vertical distribution of microplastics. The results reveal elevated microplastic concentrations within the upper 50 m of the water column and significant accumulation in the sea ice, providing evidence to support the designation of sea ice as a microplastic sink. Surface seawater exhibits a gradient of microplastic counts, decreasing from the Chukchi Sea towards the Beaufort Sea. Polyvinyl chloride polymer (~60%) dominated microplastic composition in both sea ice and seawater. This study highlights the need for further investigations in this region to enhance our understanding of microplastic sources, distribution, and transport.

Evaluation of vertical distribution characteristics of microplastics under 20 μm in lake and river waters in South Korea

Following the alarming reports of microplastic pollution in the marine environment, increased attention has been given to microplastics in other environmental media. Despite the attention, there is limited research available on the depth-distribution of microplastics in freshwater. Specifically, in the case of water sources used for drinking or tap, the height of intake facilities varies, and it is highly likely that there is a correlation between the vertical distribution of microplastics and these water intake structures. Further, because the size of microplastics varies widely in the environment, the commonly used sampling devices are not suitable for selectively extracting microplastics without causing cross-contamination. Thus, we developed a suitable device for microplastics of size 5-20 µm and studied microplastic distribution in freshwater at various depths by considering various types of microplastics and aqueous systems. Lake and river, two major water sources, were selected for the study of microplastics distribution in water system. The microplastic distribution characteristics in both water systems showed that polypropylene and polyethylene were the most abundant across all depths because of their production volume. Plastic types with higher density were found only at the lower layers, and polystyrene was found in the upper layers because of the environmental effects on its buoyancy caused pore diameter and surface area. The lake and river had higher microplastic distribution in the lower layer and upper layer, respectively. This was because the flow rate in river was higher than that of lake. The higher flow rate reduced the settling velocity in river. Thus, hydrodynamic stability influences the vertical distribution and concentrations of microplastics in the water systems. These results are expected to be used for understanding the behavioral characteristics of microplastics in water systems and to manage water sources.

Microplastic abundance, distribution, and diversity in water and sediments along a subtropical river system

Microplastic pollution in aquatic environments has been a ubiquitous concern in recent years, owing to their rapid production combined with poor waste management practices. However, information on freshwater microplastics in the Global South is still scarce, despite growing research on freshwater microplastics in recent years, particularly within the Global North. To help address this knowledge gap, we studied water and sediment microplastic dynamics along a subtropical river system, i.e. Crocodile River around the Nelspruit City area (South Africa), across three different seasons (i.e. cool-dry, hot-dry, hot-wet) using a combination of diversity indices and multivariate analyses. Microplastics were more abundant during the cool-dry season in the surface water samples (mean 1058 particles m-3) and high during the hot-dry season (mean 568 particles kg-1 dwt) in the sediment samples. The hot-wet season had a low particle density in both surface water (mean 625 particles m-3) and sediments (mean 86 particles kg-1 dwt) samples. Microplastic shapes were dominated by fibres and fragments, with the colour scheme dominated by transparent, blue, and black. The abundance of microplastics was positively correlated with pH and resistivity, and negatively with river flow. Wastewater was attributed as a primary source of microplastics, particularly because of the observed dominant fibre microplastics, usually released during laundry. Our results suggest that Crocodile River and its tributaries are temporary sinks of microplastics during periods of low rainfall. Implications of this pollution are far-reaching, including effects on residents who are dependent on the Crocodile River as a source of drinking water and aquatic biota which may be exposed to these pollutants.

Elder fish means more microplastics? Alaska pollock microplastic story in the Bering Sea

Marine microplastics are an increasingly big concern. We analyze the occurrence of microplastics in Alaska pollock (Gadus chalcogrammus) across 2+ to 12+ ages sampled from the Bering Sea. Results show that 85% of the fish have ingested microplastics and elder fish ingest more with over a third of microplastics in the 100- to 500-micrometer size range, indicating the prevalence of microplastics in Alaska pollock distributed in the Bering Sea. A positive linear relationship is obtained between fish age and microplastic size. Meanwhile, the number of polymer types increases in elder fish. The link between microplastic characteristics in Alaska pollock and the surrounding seawater suggests an extended spatial impact of microplastics. The impact of age-related microplastic ingestion on the population quality of Alaska pollock is still unknown. Therefore, we need to further investigate the potential impact of microplastics on marine organisms and the marine ecosystem, taking age as an important factor.

Arctic Ocean sediments as important current and future sinks for marine microplastics missing in the global microplastic budget

To better understand unexpectedly low plastic loads at the ocean's surface compared with inputs, unidentified sinks must be located. Here, we present the microplastic (MP) budget for multi-compartments in the western Arctic Ocean (WAO) and demonstrate that Arctic sediments serve as important current and future sinks for MPs missing from the global budget. We identified an increase of 3% year^-1 in MP deposition from sediment core observations. Relatively elevated MP abundances were found in seawater and surface sediments around the summer sea ice retreat region, implying enhanced MP accumulation and deposition facilitated by the ice barrier. We estimate 15.7 ± 2.30 × 10¹⁶ N and 0.21 ± 0.14 MT as total MP loads in the WAO with 90% (by mass) buried in the post-1930 sediments, which exceeds the global average of the current marine MP load. The slower increase in plastic burial versus production implies a lag in plastic delivery to the Arctic, indicating more pollution in the future.

Seasonal distribution of microplastics in surface waters of the Northern Indian Ocean

Seven expeditions were carried out during pre-monsoon, monsoon and post monsoon in 2018-2019 for marine plastic collection in surface waters of Northern Indian Ocean. PE and PP (83 %) is the dominant type of polymer found in the surface waters. Colored particles account for 67 % of all particles, with fibre/line accounting for 86 %. The average (Mean ± SD) microplastics concentration in the Northern Indian Ocean during pre-monsoon is 15,200 ± 7999 no./km², Monsoon is 18,223 ± 14,725 no./km² and post monsoon is 72,381 ± 77,692 no./km². BoB during pre-monsoon and post monsoon the microplastic concentration remains same except in the northern BoB this change is caused due to weak winds. Microplastics concentration varied both spatially, temporal and heterogeneity in nature. These differences are caused by effect of wind and seasonal reversal of currents. Microplastics collected in the anticyclonic eddy are 129,000 no./km².

A mixed method assessment of research productivity on microplastics in various compartments in the environment

Microplastic distribution and pollution as emerging contaminants have become a leading environmental issue globally, owing to their ecological and health implications on biota and humans. Although several bibliometric studies have been reported on microplastics, they are mostly restricted to selected environmental media. As a result, the present study aimed at assessing the literature growth trend of microplastics-related research and their distribution in the environment using a bibliometric approach. The Web of Science Core Collection was explored to retrieve published articles on microplastics from 2006 to 2021, and the data were analysed using the Biblioshiny package of RStudio. This study also highlighted filtration, separation, coagulation, membrane technology, flotation, bionanomaterials, bubble barrier devices, and sedimentation as MP remediation techniques. In the present study, a total of 1118 documents were collected from the literature search; the documents/author and authors/document were 0.308 and 3.25, respectively. A significant growth rate of 65.36% was recorded with notable progress between 2018 and 2021. China, the USA, Germany, the UK, and Italy recorded the highest number of publications within the period under consideration. A collaboration index of 3.32 was also relatively high, with the Netherlands, Malaysia, Iran, France, and Mexico having the highest MCP ratios, respectively. It is anticipated that findings from this study will help the policymakers in addressing issues concerning microplastic pollution assist the researchers in identifying areas to concentrate their studies, and where to seek collaboration in their future research plans.

Supplementary Information

The online version contains supplementary material available at 10.1007/s13762-023-04916-7.

Exploration of occurrence and sources of microplastics (>10 μm) in Danish marine waters

Microplastics (MPs) were quantified in Danish marine waters of the Kattegat and the southernmost part of Skagerrak bordering to it. Kattegat is a waterbody between Denmark and Sweden that receives inflow from the Baltic Sea and direct urban runoff from the metropolitan area of Copenhagen and Malmö. MPs were measured in 14 continuous transects while steaming between monitoring stations. MP levels tended to be highest close to the Copenhagen-Malmö area, albeit this was more obvious from the abundance of particles rather than mass. The outcome of the measurements allowed a rough MP budget in the Danish Straits region, suggesting that urban waste- and stormwater discharges could not be neglected as potential MP source in these waters. The marine samples were collected by pumping and filtering water over 10 μm steel filters, hereby sampling a total of 19.3 m³. They were prepared and analyzed by FPA-μFTIR imaging, and the scans interpreted to yield MP size, shape, polymer type, and estimated mass. The average concentration was 103 ± 86 items m^-3, corresponding to 23.3 ± 28.3 μg m^-3 (17-286 items m^-3; 0.6-84.1 μg m^-3). Most MPs were smaller than 100 μm and fragments dominated the samples. The carbonyl index was assessed for polyolefins, showing that oxidation increased with decreasing MP size, but did not correlate with distance to urban areas. A rough budget of MP in the Danish Straits region suggested that MPs discharged from urban waste- and stormwaters were an import source of MPs.

Microplastic intrusion into the zooplankton, the base of the marine food chain: Evidence from the Arabian Sea, Indian Ocean

Microplastics (MPs) are ubiquitous in the marine environment, yet information regarding their occurrence in the food web is limited. We investigated the concentration and composition of MPs in water and diverse zooplankton groups from the Arabian Sea basin. Forty-one zooplankton tows were collected with a bongo net (330 μm mesh) from the Arabian Sea in January 2019. MPs in the surface water varied between 0 and 0.055 particles/m³, with a relatively higher concentration (0.013 ± 0.002 particles/m³) in the central Arabian Sea. Though fibrous MPs were most abundant in the seawater (77.14 %), zooplankton prefers small fragments (55.3 %). The size of MPs was distinctly smaller (277.1 ± 46.74 μm) in zooplankton than that in seawater (864.32 ± 73.72 μm), and MPs bioaccumulation was observed in almost all the zooplankton functional groups. Polymer composition revealed polyamide, polyethylene, polypropylene, and PVC were abundant in water and zooplankton, suggesting that the textile, fishing, shipping, and packaging industries are significant sources. The prevailing northeasterly winds, strong West India Coastal Current, and conducive westward radiated Rossby wave during January 2019 have carried the microplastic contaminated water mass away from the coast, posing a threat to the open ocean ecosystems. These results demand further attention to investigate the state of plastic pollution in the Arabian Sea basin.

Floating plastic accumulation and distribution around Kuroshio Current, western North Pacific

The distribution of floating plastic debris around the Kuroshio Current which transports plastics from the coastal waters of Asian countries to North Pacific subtropical gyre, was investigated in 2014. The mean abundance and weight of plastic debris on the sea surface were 100,376 counts/km² and 446.16 g/km², respectively. Intensive plastic accumulation was observed in the frontal area between the northern edge of the Kuroshio and coastal waters off Shikoku, while a relatively higher abundance in the south of Kuroshio was generally associated with anticyclonic mesoscale eddies. Such an accumulation resulted from the eddy-Kuroshio interactions which are specifically associated with the offshore non-large meandering Kuroshio path. Overall, white, fragmented, small-sized (≤1 mm) particles with polyethylene and polypropylene polymers were dominant. In the southern area of Kuroshio, the contribution of polystyrene and larger-sized plastic was higher, suggesting a rapid influx of fresh particles from western Japan to offshore by the northwest monsoon.

First Evidence of Microplastic Occurrence in the Marine and Freshwater Environments in a Remote Polar Region of the Kola Peninsula and a Correlation with Human Presence

Microplastics (MPs) have even been detected in remote environments, including high-latitude regions, where human activities are restricted or strongly limited. We investigated the surface water of the bays of the Barents Sea and the freshwater lakes that are located close to and several kilometers from a year-round resident field station in the remote tundra region of the Kola Peninsula. The microplastics' presence in aquatic environments in this region has not been indicated yet. Microplastics were detected in all samples collected from the Barents Sea (<4800 items·m^-3) and the lakes (<3900 items·m^-3). Fibers made from polyethylene terephthalate (PET)-the most common thermoplastic polymer of the polyester family-and semi-synthetic cellulosic rayon were the most dominant. This indicated that the source of fiber contamination may come from protective clothes, ropes, ship equipment, and fishing nets. Small microplastics can spread through current and atmospheric transport. The Norwegian Current is likely responsible for the lack of correlations found between MP contamination and the distance from the field station between the studied bays of the Barents Sea. On the contrary, a significant correlation with human presence was observed in the concentration of microfibers in the water of the tundra lakes. The number of MP fibers decreased with an increase in the distance from the field station. This is the first study, to the best of our knowledge, that reports such a correlation in a remote region. We also discuss implications for animals. Our results show that even the most isolated ecosystems are not free from microplastic pollution.

Microplastic pollution threats coastal resilience and sustainability in Xiamen City, China

Microplastics have raised growing awareness due to their ubiquity and menaces to coastal resilience and sustainability. The abundance, distribution, and characteristics of microplastics in water and organisms in Xiamen were evaluated. Results showed that the average abundance of microplastics in the surface water of Xiamen Bay was 1.55 ± 1.94 items/m³. The dominant color, size, shape, and polymer type were white, 1.0-2.5 mm, and fragments and lines, and polyethylene and polypropylene, respectively. The average abundance of microplastics in the fish in Xiamen was 2.44 ± 1.56 items/g wet weight. They were dominated by fibers of blue polyethersulfone and polyethylene terephthalate, and sizes <2.5 mm. There was a negative correlation between the polymer type in fish and that in water, while a positive correlation between shapes of microplastics of both fish species. Results will aid in formulating management measures for preventing microplastic pollution in Xiamen, ultimately promoting coastal resilience and sustainability of coastal communities.

Horizontal distribution of surface microplastic concentrations and water-column microplastic inventories in the Chukchi Sea, western Arctic Ocean

The recent influx of microplastics into the Arctic Ocean may increase environmental stress on the western Arctic marine ecosystem, which is experiencing significant sea-ice loss due to global warming. Quantitative data on microplastics in the western Arctic Ocean are very limited, and the microplastic budget of the water column is completely unknown. To fill in gaps in our knowledge of Arctic microplastics, we observed surface concentrations (number of particles per unit volume of seawater) of meso- and microplastics using a neuston net, and we observed wind speeds and significant wave heights in the Chukchi Sea, Bering Strait, and Bering Sea. From these observations, we estimated the total number (particle inventory) and mass (mass inventory) of microplastics in the entire water column by taking into account the effect of vertical mixing. The particle inventory of microplastics in the Chukchi Sea ranged from 0 to 18,815 pieces km^-2 with a mean and standard deviation of 5236 ± 6127 pieces km^-2. The mass inventory ranged from 0 to 445 g km^-2 with a mean and standard deviation of 124 ± 145 g km^-2. Mean particle inventories for the Chukchi Sea were one-thirtieth of those for the Arctic Ocean on the Atlantic side and less than one-tenth of the average for the global ocean, suggesting that the Chukchi Sea is less polluted. However, the annual flux of microplastics from the Pacific Ocean into the Chukchi Sea, estimated from microplastic concentrations in the Bering Strait, was about 5.5 times greater than the total amount of microplastic in the entire Chukchi Sea water. This suggests that microplastic inflows from the Pacific Ocean are accumulating in large amounts in reservoirs other than the Chukchi Sea water (e.g., sea ice and seafloor sediments) or in the downstream regions of the Pacific-origin water.

Assessment of manta trawling and two newly-developed surface water microplastic monitoring techniques in the open sea

The ubiquitous microplastic (MP) pollution across the waterways, sediments, biota, and atmosphere has amplified concerns at a global scale. Unfortunately, harmonized MP monitoring protocols are absent for accurate evaluation on MP pollution. Few large-scale MP sampling programs involving different designs have been implemented in the open sea. In this study, a manta trawling and two newly custom-built pump filtration systems, namely, a trawl-underway pump combination system coupled in conjunction with an in-situ filtration device (Y-shaped filter, New Type I) and a stationary onboard pumping coupled to Y-shaped filter (New Type II), were evaluated for MP pollution in the mid-North Pacific Ocean. The trawling-based systems (manta trawl and New Type I) collected samples covering a large area, whereas New Type II operated at a fixed site. The new systems achieved fractionated filtration of MPs on site and prevented airborne contamination. The electronic fuel meter installed in the New Type II yielded a more accurate volume. Results showed that the average MP abundance of the aforementioned sampling techniques were 0.65, 2.56, and 7.48 items m^-3, respectively. The abundances in the same particle size range (0.3-5.0 mm) from the new systems were higher. The recovered MPs from all systems were mainly white and polypropylene. Note that the MPs from the manta trawl were primarily fragments; however, they were mainly fibers from the new systems. This corroborated the capability of new systems in harvesting small items (0.1-0.3 mm) and fibers. The cost analysis showed that the new systems beat the manta trawl concerning price performance. The study results provide alternatives for future MP sampling, which will ultimately aid in the method harmonization and standardization of MP sampling.

Distribution characteristics of microplastics in surface and subsurface Antarctic seawater

Microplastics have attracted worldwide attention due to their potential threat to the marine ecosystem, with such pollutants even detected in the polar seas. Although in-depth research on microplastics has increased in recent years, studies in Antarctic waters remain relatively scarce compared with coastal waters and open oceans. In this study, microplastics in surface and subsurface Antarctic waters were investigated. The average microplastic abundance in the surface water was 0.10 ± 0.14 items/m³, with highest abundance in the Ross Sea, and the average microplastic abundance in the subsurface water was 1.66 ± 1.20 items/m³, with highest abundance in the Dumont d'Urville Sea. Polyester was the main microplastic in the surface waters (87.3%), while polypropylene (33.1%), polyester (28.7%), and polyethylene (22.8%) were the dominant microplastics in the subsurface waters. Results indicate that microplastic pollution in Antarctic waters may come from the Antarctic continent as well as southward transport from the ocean at mid- and low latitudes.

Floating microplastics pollution in the Central Atlantic Ocean of Morocco: Insights into the occurrence, characterization, and fate

This work presents preliminary results about abundance, distribution, characteristics, sources, and fate of microplastics (MPs) in the Central Atlantic Ocean (CAO) of Morocco. The investigation was conducted into three subsections, each characterized by different types of human activities and covering rural, village, and urban areas. MPs were detected in 100 % of the sampling sites. The abundances varied from 0.048 to 3.305 items/m³, with a mean abundance of 0.987 ± 1.081 items/m³. MPs abundance was higher in surface seawater linked to urban areas compared to village and rural areas. The dominant polymer type was polyester (PET-53.8 %) followed by polypropylene (PP-24.36 %), polyamide (PA-7.56 %), polystyrene (PS-6.88 %), polyvinyl chloride (PVC-2.64 %), ethylene vinyl acetate (EVA-2.60 %), polyetherurethane (PUR-1.36 %), and acrylic (AC-0.8 %). Fibers were the most dominant shapes accounting for over 50 %. MPs were mainly smaller than 2 mm in size (71 %) and characterized by colorful aspects. These findings suggested that wastewater treatment plant (WWTP) effluents and anthropogenic activities (industry, tourism, sanitation, and fishing) are the major pollution sources of MPs in the study area. SEM/EDX micrographs showed different weathering degrees and chemical elements adhered to the MPs surface.

Environmentally relevant concentrations of microplastics modulated the immune response and swimming activity, and impaired the development of marine medaka Oryzias melastigma larvae

Microplastics (MPs), due to their impacts on the ecosystem and their integration into the food web either through trophic transfer or ingestion directly from the ambient environment, are an emerging class of environmental contaminants posing a great threat to marine organisms. Most reports on the toxic effects of MPs exclusively focus on bioaccumulation, oxidative stress, pathological damage, and metabolic disturbance in fish. However, the collected information on fish immunity in response to MPs is poorly defined. In particular, little is known regarding mucosal immunity and the role of mucins. In this study, marine medaka (Oryzias melastigma) larvae were exposed to 6.0 µm beads of polystyrene microplastics (PS-MPs) at three environmentally relevant concentrations (10² particles/L, 10⁴ particles/L, and 10⁶ particles/L) for 14 days. The experiment was carried out to explore the developmental and behavioural indices, the transcriptional profiles of mucins, pro-inflammatory, immune, metabolism and antioxidant responses related genes, as well as the accumulation of PS-MPs in larvae. The results revealed that PS-MPs were observed in the gastrointestinal tract, with a concentration- and exposure time-dependent manner. No significant difference in the larval mortality was found between the treatment groups and the control, whereas the body length of larvae demonstrated a significant reduction at 10⁶ particles/L on 14 days post-hatching. The swimming behaviour of the larvae became hyperactive under exposure to 10⁴ and 10⁶ particles/L PS-MPs. In addition, PS-MP exposure significantly up-regulated the mucin gene transcriptional levels of muc7-like and muc13-like, however down-regulated the mucin gene expression levels of heg1, muc2, muc5AC-like and muc13. The immune- and inflammation and metabolism-relevant genes (jak, stat-3, il-6, il-1β, tnf-а, ccl-11, nf-κb, and sod) were significantly induced by PS-MPs at 10⁴ and 10⁶ particles/L compared to the control. Taken together, this study suggests that PS-MPs induced inflammation response and might obstruct the immune functions and retarded the growth of the marine medaka larvae even at environmentally relevant concentrations.

Methodology for removing microplastics and other anthropogenic microparticles from sludge dewatering system

Anthropogenic microparticles (e.g., microplastics) are present in sewage plants, especially in sludge streams. However, the lack of standardized protocols to scrutinize the presence of anthropogenic microparticles in sludge makes the comparison between studies unfeasible. To tackle the knowledge gap regarding the efficiency of methodologies on the extraction of anthropogenic microparticles from the complex organic matrix, dewatered sludge, and digested sludge was treated with peroxidation and density separation, and the recovery of microparticles from these samples was investigated. The results showed that with the use of a higher density solution (NaI, 1.5 g/cm³) a much better recovery of anthropogenic microparticles from sludge samples (approximately 1000 microparticles/g-dw and 2000 microparticles/g-dw, from dewatered and digested sludge, respectively) was achieved in comparison with the use of a lower density solution (NaCl, 1.2 g/cm³) (200 microparticles/g-dw and 600 microparticles/g-dw from dewatered and digested sludge, respectively). Moreover, although the use of peroxidation is an essential step to break down the sludge structure and to release microparticles to the liquid phase, the use of peroxidation after or before density separation did not affect the overall recovery of microparticles. Polyethylene, polypropylene, and copolymer ethylene-ethyl-acrylate were the main microplastic fragments identified in digested sludge and dewatered sludge. However, no relation was observed between the method applied and the polymer recovered. Regarding the presence of anthropogenic microparticle in centrifuge effluent, 450 ± 212 microparticles/L were counted, and although little is known about this stream, in can be a relevant source of anthropogenic microparticles.

Mangrove forest: An important coastal ecosystem to intercept river microplastics

The research on transportation of river microplastics (MPs) mainly focuses on the estimations of the total contents of river MPs entering the ocean, while the related transportation processes and influence factors were still largely unknown. In our study, the role of mangrove forest, a special tropical ecosystem in the estuary, on the transportations of MPs from rivers to ocean was explored. Except for the ND river with the absence of mangrove forest, the MPs collected from the water sample of the river upstream were much higher than their corresponding downstream (p < 0.05), with the interception rate of riverine MPs by mangrove forests ranging from 12.86% to 56% in dry season and 10.57%-42% in rainy season. The MPs with the characteristics of high density, larger size and regular shape were more easily intercepted. Furthermore, the combined effects of ecological indicators, the properties of mangrove and the hydrodynamic factors jointly determined the interception rates of MPs. This study provides a new perspective and data support for quantifying mangrove forests intercepting MPs in rivers as a factor of MPs retention in global rivers.

Mechanical recycling of plastic waste as a point source of microplastic pollution

Plastic pollution has become one of the most pressing environmental issues. Recycling is a potential means of reducing plastic pollution in the environment. However, plastic fragments are still likely released to the aquatic environment during mechanical recycling processes. Here, we examined the plastic inputs and effluent outputs of three mechanical recycling facilities in Vietnam dealing with electronic, bottle, and household plastic waste, and we found that large quantities of microplastics (plastics <5 mm in length) are generated and released to the aquatic environment during mechanical recycling without proper treatment. Comparisons with literature data for microplastics in wastewater treatment plant effluents and surface water indicated that mechanical recycling of plastic waste is likely a major point source of microplastics pollution. Although there is a mismatch between the size of the microplastics examined in the present study and the predicted no-effect concentration reported, it is still possible that microplastics generated at facilities pose risks to the aquatic environment because there might be many plastic particulates smaller than 315 μm, as suggested by our obtained size distributions. With mechanical recycling likely to increase as we move to a circular plastics economy, greater microplastics emissions can be expected. It is therefore an urgent need to fully understand not only the scale of microplastic generation and release from plastic mechanical recycling but also the environmental risk posed by microplastics in the aquatic environment.

Plastic Interactions with Pollutants and Consequences to Aquatic Ecosystems: What We Know and What We Do Not Know

Plastics are a group of synthetic materials made of organic polymers and some additives with special characteristics. Plastics have become part of our daily life due to their many applications and uses. However, inappropriately managed plastic waste has raised concern regarding their ecotoxicological and human health risks in the long term. Due to the non-biodegradable nature of plastics, their waste may take several thousands of years to partially degrade in natural environments. Plastic fragments/particles can be very minute in size and are mistaken easily for prey or food by aquatic organisms (e.g., invertebrates, fishes). The surface properties of plastic particles, including large surface area, functional groups, surface topography, point zero charge, influence the sorption of various contaminants, including heavy metals, oil spills, PAHs, PCBs and DDT. Despite the fact that the number of studies on the biological effects of plastic particles on biota and humans has been increasing in recent years, studies on mixtures of plastics and other chemical contaminants in the aquatic environment are still limited. This review aims to gather information about the main characteristics of plastic particles that allow different types of contaminants to adsorb on their surfaces, the consequences of this adsorption, and the interactions of plastic particles with aquatic biota. Additionally, some missing links and potential solutions are presented to boost more research on this topic and achieve a holistic view on the effects of micro- and nanoplastics to biological systems in aquatic environments. It is urgent to implement measures to deal with plastic pollution that include improving waste management, monitoring key plastic particles, their hotspots, and developing their assessment techniques, using alternative products, determining concentrations of micro- and nanoplastics and the contaminants in freshwater and marine food-species consumed by humans, applying clean-up and remediation strategies, and biodegradation strategies.

Microplastics in Kenya's marine nearshore surface waters: Current status

Microplastics (MPs) were collected at six locations along Kenya's marine nearshore surface waters using a 300 μm mesh-size manta net. The samples were washed over a 125-μm mesh size sieve No.120 into a glass jar and preserved in 70% ethanol. MPs were sorted, counted visually under a dissecting microscope then identified using attenuated total reflection Fourier transform infrared (ATR-FTIR) spectroscopy. A total of 1473 particles with an overall mean concentration of 0.58 ± 1.29 MPs m^-3, were collected. Fragments were the most common types representing 55% of the total MPs, followed by films (40%) and fibers (2%). Polypropylene (PP) was dominant (52%), high-density polyethylene (HDPE) comprised 38% and low density polyethylene (LDPE) 10% of the total MPs. This study provided baseline information, in which Malindi was identified as a hot spot for MPs pollution. Furthermore, the outcomes will assist policy formulations and management strategies aimed at controlling marine plastics.

Residual additives in marine microplastics and their risk assessment - A critical review

This review summarizes the current state of knowledge regarding the risk assessment of plastic-associated residual additives, i.e. residual monomers, degradation products and additives, in the marine environment, also considering effects of weathering and bioavailability. Experimental studies have found a number of organic and metal additive compounds in leachates from plastics, and the analysis of weathered plastic particles, such as polyethylene, polypropylene and polystyrene particles sampled on beaches and shorelines, has identified residual additives, such as flame retardants, plasticizers, UV stabilizers and antioxidants. While the transfer of e.g. PBDEs to organisms upon ingestion has been demonstrated, studies on uptake and bioaccumulation of plastic-associated chemicals are inconclusive. Studies on hazard and risk assessments are few, and focus on monomers and/or a limited number of high concentration additives, such as phthalates and flame retardants. The risk assessment results vary between low, moderate and high risks of specific additives, and are not necessarily consistent for the same compound. Given the large number of chemicals potentially introduced into the marine environment with plastic particles and the challenges associated with the correct quantification of exposure concentrations and toxicity thresholds, the question arises whether new risk assessment concepts may be needed.

Systematical insights into distribution and characteristics of microplastics in near-surface waters from the East Asian Seas to the Arctic Central Basin

The spatial distribution and composition of microplastics in near-surface water (8 m) was investigated from the East Asian Seas to the Arctic Central Basin. Microplastics were detected in 93.9% of the sampling sites. Abundances ranged from 0.48 to 7.62 items/m³, with an average abundance of 2.91 ± 1.93 items/m³. The highest average abundance was observed in the Arctic Central Basin. Polyester (PET) was the dominant type, accounting for 71.3% of total microplastics, followed by rayon or cellophane and polytetrafluoroethylene (PTFE). Microplastics < 2 mm accounted for 81.9% of total particles. Its distribution peaked in the 1-2 mm size range. The 0.30-2 mm fibers were the most abundant. In the East Asian Seas, the abundance was significantly negatively correlated with longitude, whereas the accumulation of microplastics was not observed in the northeastern sector of Japan Sea. Abundances of microplastics at sites located in the sub-Arctic and Arctic Oceans showed a significant positive relationship with latitude, indicating that the Arctic Ocean is a potential accumulation zone of microplastics. The findings of this study will provide systematical insights into distribution of microplastics and basic information for understanding the accumulation mechanism of microplastics in near-surface waters from the East Asian Seas to the Arctic Central Basin.

Spatio-temporal variation of microplastic pollution in the sediment from the Chukchi Sea over five years

Sediment has been considered as an important sink for microplastics (MPs), but there are limited reports about the spatial and temporal variability of MPs in sediment from the Arctic Ocean. Furthermore, understanding is lacking on the correlation between Arctic sea ice variation and MP abundance in sediment. This study aimed to assess the MP contamination in the sediment from the Chukchi Sea over five years through three voyages (in 2016, 2018, and 2020). The MP abundances in the sediments from the Chukchi Plateau and Chukchi Shelf over five years ranged from 33.66 ± 15.08 to 104.54 ± 28.07 items kg^-1 dry weight (DW) and 20.63 ± 6.71 to 55.64 ± 22.61 items kg^-1 DW, respectively. The MP levels from the Chukchi Sea were lower than those from the Eastern Arctic Ocean. Our findings suggest that the Chukchi Plateau is an accumulation zone for fibers related to fishing gear and textiles under the dual influence of the Pacific and Atlantic Ocean currents. However, the reduction of these fibers in the sediment from the Chukchi Shelf might be related to bottom currents, sediment resuspension, and biomass. Moreover, the MP abundance in the sediment from the Chukchi Sea was positively correlated with the reduction of Arctic sea ice, suggesting that the melting sea ice contributes to the increase in MP levels in the sediment. The increase in blue MPs from the Chukchi Plateau over time might be attributed to melting sea ice or intense fishing activity, whereas the increase of the smallest MPs in this region could be owing to the breakdown of larger plastics during long-distance transport or the easier settlement of smaller MPs. Further time-series investigations are urgently required to improve the understanding of the environmental fate and transport of MPs among the different Arctic environmental compartments.

Occurrence and Seasonal Variation of Microplastics in the Effluent from Wastewater Treatment Plants in Qingdao, China

Wastewater treatment plants (WWTPs) are considered as one of the important sources of microplastics (MPs) in the marine environment. In this paper, the characteristics of MPs in the effluent discharged from five WWTPs in Qingdao, China, in winter and summer were analyzed. The results showed that only fibers and fragments were observed, with fibers as a dominant part. Rayon was the most domain polymer type, followed by Polyethylene terephthalate (PET) and chlorinated polyethylene (CPE). The average sizes of fiber MPs were 1010 ± 924 µm and 610 ± 691 µm in winter and summer, respectively. The contents of rayon were higher in summer than in winter. More small and transparent MPs were observed in summer. Rayon abundances ranged from 4.1 to 19.9 items/L and 33.3 to 116.7 items/L, with 12.3 ± 5.6 items/L and 67.6 ± 30.6 items/L as the average value in winter and in summer, respectively. The abundances of other polymer type MPs were 7.23~19.65 items/L with average value of 12.7 ± 4.7 items/L in winter and 12.0~20.0 items/L with 16.8 ± 4.7 items/L in summer. The daily emissions were estimated as 8.38 × 109~4.25 × 1010 items (9.2~27.8 kg) for rayon and 8.0 × 109~1.2 × 1010 items (7.6~5.3 kg) discharged for the other polymer type MPs from the five WWTPs. The results indicated that the seasonal variation of characteristics and emission of MPs in the effluent from WWTPs was mainly caused by increasing discharge of rayon, which may relate to people’s living habits and tourism activities.