Improved separation and antifouling performance of PVA thin film nanocomposite membranes incorporated with carboxylated TiO2 nanoparticles

A facile strategy to fabricate high-barrier, water- and oil-repellent paper with carboxymethyl cellulose/collagen fiber/modified polyvinyl alcohol

Due to the increasingly serious environmental and human health hazards brought by traditional food packaging materials, paper-based packaging materials have become increasingly popular among consumers in recent years. Currently, the fabrication of fluorine-free degradable water- and oil-repellent paper using low-cost bio-based polymers by a simple method is a hot subject in the field of food packaging. In this work, we used carboxymethyl cellulose (CMC), collagen fiber (CF), and modified polyvinyl alcohol (MPVA) to create coatings that were impervious to water and oil. The homogeneous mixture of CMC and CF generated electrostatic adsorption to impart excellent oil repellency to the paper. PVA was chemically modified by sodium tetraborate decahydrate, and the MPVA coating imparted excellent water-repellent properties to the paper. Finally, the water- and oil-proof paper showed excellent water repellency (Cobb value: 1.12 g/m²), oil repellency (kit rating: 12/12), low air permeability (0.3 μm/Pa·s), and stronger mechanical properties (4.19 kN/m). This non-fluorinated degradable water- and oil-repellent paper with high barrier properties prepared by a convenient method is expected to be in widespread use in the food packaging field.

Cellulose acetate in fabrication of polymeric membranes: A review

Developing biodegradable polymers to fabricate filtration membranes is one of the main challenges of membrane science and technology. Cellulose acetate (CA) membranes, due to their excellent film-forming property, high chemical and mechanical stability, high hydrophilicity, eco-friendly, and suitable cost, are extensively used in water and wastewater treatment, gas separation, and energy generation purposes. The CA is one of the first materials used to fabricate filtration membranes. However, in the last decade, the possibility of modification of CA to improve permeability and stability has attracted the researcher's attention again. This review is focused on the properties of cellulose derivatives and especially CA membranes in the fabrication of polymeric separation membranes in various applications such as filtration, gas separation, adsorption, and ion exchange membranes. Firstly, a brief introduction of CA properties and used molecular weights in the fabrication of membranes will be presented. After that, different configurations of CA membranes will be outlined, and the performance of CA membranes in several applications and configurations as the main polymer and as an additive in the fabrication of other polymer-based membranes will be discussed.

Surface-engineered polyethersulfone membranes with inherent Fe-Mn bimetallic oxides for improved permeability and antifouling capability

In recent years, bimetallic oxide nanoparticles have garnered significant attention owing to their salient advantages over monometallic nanoparticles. In this study, Fe₂O₃-Mn₂O₃ nanoparticles were synthesized and used as nanomodifiers for polyethersulfone (PES) ultrafiltration membranes. A NIPS was used to fabricate asymmetric membranes. The effect of nanoparticle concentration (0-1 wt.%) on the morphology, roughness, wettability, porosity, permeability, and protein filtration performance of the membranes was investigated. The membrane containing 0.25 wt% nanoparticles exhibited the lowest water contact angle (67°) and surface roughness (10.4 ± 2.8 nm) compared to the other membranes. Moreover, this membrane exhibited the highest porosity (74%) and the highest pure water flux (398 L/m² h), which was 16% and 1.9 times higher than that of the pristine PES membrane. The modified PES membranes showed an improved antifouling ability, especially against irreversible fouling. Bovine serum albumin protein-based dynamic five-cycle filtration tests showed a maximum flux recovery ratio of 77% (cycle-1), 67% (cycle-2), and 65.8% (cycle-5) for the PES membrane containing 0.25 wt% nanoparticles. Overall, the biphasic Fe₂O₃-Mn₂O₃ nanoparticles were found to be an effective nanomodifier for improving the permeability and antifouling ability of PES membranes in protein separation and water treatment applications.

A Mini-Review of Enhancing Ultrafiltration Membranes (UF) for Wastewater Treatment: Performance and Stability

The scarcity of freshwater resources in many regions of the world has contributed to the emergence of various technologies for treating and recovering wastewater for reuse in industry, agriculture, and households. Deep wastewater treatment from oils and petroleum products is one of the difficult tasks that must be solved. Among the known technologies, UF membranes have found wide industrial application with high efficiency in removing various pollutants from wastewater. It is shown that the search for and development of highly efficient, durable, and resistant to oil pollution UF membranes for the treatment of oily wastewater is an urgent research task. The key parameters to improve the performance of UF membranes are by enhancing wettability (hydrophilicity) and the antifouling behavior of membranes. In this review, we highlight the using of ultrafiltration (UF) membranes primarily to treat oily wastewater. Various methods of polymer alterations of the UF membrane were studied to improve hydrophilicity, the ability of antifouling the membrane, and oil rejection, including polymer blending, membrane surface modification, and the mixed membrane matrix. The influence of the type and composition of the hydrophilic additives of nanoparticles (e.g., Multiwall carbon nanotubes (MWCNT), graphene oxide (GO), zinc oxide (ZnO), and titanium dioxide (TiO2), etc.) was investigated. The review further provides an insight into the removal efficiency percent.

Ongoing progress on novel nanocomposite membranes for the separation of heavy metals from contaminated water

Membranes, as the primary separation element of membrane-based processes, have greatly attracted the attention of researchers in several water treatment applications, including wastewater treatment, water purification, water disinfection, toxic and non-toxic chemical molecules, heavy metals, among others. Today, the removal of heavy metals from water has become challenging, in which chemical engineers are approaching new materials in membrane technologies. Therefore, the current review elucidates the progress of using different concepts of membranes and potential novel materials for such separations, identifying that polymeric membranes can exhibit a removal efficiency from 77 up to 99%; while novel nanocomposite membranes are able to offer complete removal of heavy metals (up to 100%), together with unprecedented permeation rates (from 80 up to 1, 300 L m^-2 h^-1). Thereby, the review also addresses the highlighted literature survey of using polymeric and nanocomposite membranes for heavy metal removal, highlighting the relevant insights and denoted metal uptake mechanisms. Moreover, it gives up-to-date information related to those novel nanocomposite materials and their contribution to heavy metals separation. Finally, the concluding remarks, future perspectives, and strategies for new researchers in the field are given according to the recent findings of this comprehensive review.

Effect of Silica Sodalite Functionalization and PVA Coating on Performance of Sodalite Infused PSF Membrane during Treatment of Acid Mine Drainage

In this study, silica sodalite (SSOD) nanoparticles were synthesized by topotactic conversion and functionalized using HNO3/H2SO4 (1:3). The SSOD and functionalized SSOD (fSSOD) nanoparticles were infused into a Polysulfone (Psf) membrane to produce mixed matrix membranes. The membranes were fabricated via the phase inversion method. The membranes and the nanoparticles were characterized using Scanning Electron Microscopy (SEM) to check the morphology of the nanoparticles and the membranes and Fourier Transform Infrared to check the surface chemistry of the nanoparticles and the membranes. Thermal stability of the nanoparticles and the membranes was evaluated using Themogravimetry analysis (TGA) and the degree of hydrophilicity of the membranes was checked via contact angle measurements. The mechanical strength of the membranes and their surface nature (roughness) were checked using a nanotensile instrument and Atomic Force Microscopy (AFM), respectively. The textural property of the nanoparticles were checked by conducting N2 physisorption experiments on the nanoparticles at 77 K. AMD-treatment performance of the fabricated membranes was evaluated in a dead-end filtration cell using a synthetic acid mine drainage (AMD) solution prepared by dissolving a known amount of MgCl2, MnCl2·4H2O, Na2SO4, Al(NO3)3, Fe(NO3)3·9H2O, and Ca2OH2 in deionized water. Results from the N2 physisorption experiments on the nanoparticles at 77 K showed a reduction in surface area and increase in pore diameter of the nanoparticles after functionalization. Performance of the membranes during AMD treatment shows that, at 4 bar, a 10% fSSOD/Psf membrane displayed improved heavy metal rejection >50% for all heavy metals considered, expect the SSOD-loaded membrane that showed a rejection <13% (except for Al3+ 89%). In addition, coating the membranes with a PVA layer improved the antifouling property of the membranes. The effects of multiple PVA coating and behaviour of the membranes during real AMD are not reported in this study, these should be investigated in a future study. Therefore, the newly developed functionalized SSOD infused Psf membranes could find applications in the treatment of AMD or for the removal of heavy metals from wastewater.

Cellulose acetate-polyvinyl alcohol blend hemodialysis membranes integrated with dialysis performance and high biocompatibility

Hemodialysis considered as therapy of end-stage renal disease (ESRD) for the separation of protein and uremic toxins based on their molecular weights using semi-permeable membranes. Cellulose Acetate (CA) hemodialysis membrane has been widely used in the biomedical field particularly for hemodialysis applications. The main issue of CA membrane is less selectivity and hemocompatibility. In this study, to enhance the filtration capability and biocompatibility of CA hemodialysis membrane modified by using Polyvinyl Alcohol (PVA) and Polyethylene Glycol (PEG) as additives. CA-PVA flat sheet membranes were cast by phase inversion method, and separation was done by dead-end filtration cell. The synthesized membranes were described in terms of chemical structure using Fourier Transform Infrared Spectroscopy (FTIR) and morphology by Scanning Electron Microscopy (SEM), Atomic Force Microscopy (AFM), pure water flux, solute permeation, and protein retention. Biocompatibility of the membranes was tested by the platelet adherence, hemolysis ratio, thrombus formation, and plasma recalcification time. SEM images exposed that the CA-PVA membrane has a uniform porous structure. 42.484 L/m² h is the maximum pure water flux obtained. The CA-PVA rejected up to 95% of bovine serum albumin (BSA). A similar membrane separated 93% of urea and 89% of creatinine. Platelet adhesion and hemolysis ratio of casted membranes were less than the pure CA membrane. Increased clotting time and less thrombus formation on the membrane's surface showed that the fabricated membrane is biocompatible. CA-PVA hemodialysis membranes are more efficient than conventional reported hemodialysis membranes. It revealed that CA-PVA is high performing biocompatible hemodialysis membrane.

Chitosan-Based Nanocomposite Polymeric Membranes for Water Purification-A Review

During the past few years, researchers have focused their attention on developing innovative nanocomposite polymeric membranes with applications in water purification. Natural and synthetic polymers were considered, and it was proven that chitosan-based materials presented important features. This review presents an overview regarding diverse materials used in developing innovative chitosan-based nanocomposite polymeric membranes for water purification. The first part of the review presents a detailed introduction about chitosan, highlighting the fact that is a biocompatible, biodegradable, low-cost, nontoxic biopolymer, having unique structure and interesting properties, and also antibacterial and antioxidant activities, reasons for using it in water treatment applications. To use chitosan-based materials for developing nanocomposite polymeric membranes for wastewater purification applications must enhance their performance by using different materials. In the second part of the review, the performance's features will be presented as a consequence of adding different nanoparticles, also showing the effect that those nanoparticles could bring on other polymeric membranes. Among these features, pollutant's retention and enhancing thermo-mechanical properties will be mentioned. The focus of the third section of the review will illustrate chitosan-based nanocomposite as polymeric membranes for water purification. Over the last few years, researchers have demonstrated that adsorbent nanocomposite polymeric membranes are powerful, important, and potential instruments in separation or removal of pollutants, such as heavy metals, dyes, and other toxic compounds presented in water systems. Lastly, we conclude this review with a summary of the most important applications of chitosan-based nanocomposite polymeric membranes and their perspectives in water purification.

Tailoring the Effects of Titanium Dioxide (TiO2) and Polyvinyl Alcohol (PVA) in the Separation and Antifouling Performance of Thin-Film Composite Polyvinylidene Fluoride (PVDF) Membrane

In this study, thin-film composite (TFC) polyvinylidene fluoride (PVDF) membranes were synthesized by coating with titanium dioxide (TiO₂)/polyvinyl alcohol (PVA) solution by a dip coating method and cross-linked with glutaraldehyde. Glutaraldehyde (GA) acted as a cross-linking agent to improve the thermal and chemical stability of the thin film coating. The incorporation of TiO₂ in the film enhanced the hydrophilicity of the membrane and the rejection of dyes during filtration. The layer of TiO₂ nanoparticles on the PVDF membranes have mitigated the fouling effects compared to the plain PVDF membrane. The photocatalytic performance was studied at different TiO₂ loading for the photodegradation of dyes (reactive blue (RB) and methyl orange (MO)). The results indicated that the thin film coating of TiO₂/PVA enhanced photocatalytic performance and showed good reusability under UV irradiation. This study showed that nearly 78% MO and 47% RB were removed using the TFC membrane. This work provides a new vision in the fabrication of TFC polymeric membranes as an efficient wastewater treatment tool.

Bioinspired antibacterial PVA/Melanin-TiO2 hybrid nanoparticles: the role of poly-vinyl-alcohol on their self-assembly and biocide activity

Hybrid Melanin-TiO₂ nanoparticles are promising bioinspired antibacterial agents for biomedical coatings and food-packaging fields. However, due to a very low colloidal stability, they showed a high tendency to self-aggregate and rapidly precipitate, making not easy their use in aqueous medium to produce homogeneous antimicrobial coatings or nanocomposites. A valid strategy to improve their dispersion is the combination with a hydrophilic water-soluble polymer such as poly-vinyl-alcohol (PVA), which is a good choice to improve the colloidal stability of nanoparticles and to modulate their agglomeration. In this work, we propose an in-situ synthetic approach based on the hydrothermal route, by which the hybrid Melanin-TiO₂ nanoparticles were prepared starting from the inorganic and organic precursors in the presence of PVA. Combined approach of TEM, XRD, TG/DSC, EPR and DLS techniques allows for assessing the PVA role in the formation of hybrids and on their morphological features as well as colloidal stability and aqueous dispersion. Antibacterial tests demonstrated the biocide activity of PVA/Melanin-TiO₂ nanoparticles against Escherichia coli bacterial cultures, which resulted partially influenced by the PVA content. This study provides key information on the mutual influence of organic/inorganic components on the functional properties of the final hybrid nanocomposites, contributing to define a much more far-reaching implementation in the synthesis of bioinspired polymer-based nanocomposites.

Evaluation of polyvinyl alcohol (PVA) loading in the PVA/titanium dioxide (TiO2) thin film coating on polyvinylidene fluoride (PVDF) membrane for the removal of textile dyes

Polyvinylidene fluoride (PVDF) membrane was coated with polyvinyl alcohol (PVA)/titanium dioxide (TiO₂) solution using dip-coating method. The effect of PVA loading (0-12 wt%) at a fixed TiO₂ concentration (1 wt%) was investigated through physical and morphological characterization of the membranes. The experimental results showed that increasing the PVA content from 0 to 12 wt% in the coating solution increased the hydrophilicity and tensile strength as well as the young's modulus of the coated membranes. It also increased the thickness of the thin film coating which enhanced the removal of dyes but affected the permeate flux adversely. Larger the molecular weight of the dye, higher the rejection and lower the permeate flux obtained. The antifouling performance of the membrane was studied using Bovine Serum Albumin (BSA) solution and the fouling was measured using the irreversible fouling factor. The results indicated that the PVA/TiO₂ coated PVDF membrane had lower irreversible fouling factors compared to plain PVDF membrane. The PVDF membrane with a thin film coating containing 3 wt% of PVA and 1 wt% of TiO₂ showed high photocatalytic degradation for the three dyes studied under UV irradiation due to uniform dispersion of TiO₂ nanoparticles over the membrane surface. Further, smaller the molecular weight of the dye, larger the photodegradation that was observed.

Ultrathin Thin-Film Composite Polyamide Membranes Constructed on Hydrophilic Poly(vinyl alcohol) Decorated Support Toward Enhanced Nanofiltration Performance

Traditional polyamide-based interfacial polymerized nanofiltration (NF) membranes exhibit upper bound features between water permeance and salt selectivity. Breaking the limits of the permeability and rejections of these composite NF membranes are highly desirable for water desalination. Herein, a high-performance NF membrane (TFC-P) was fabricated via interfacial polymerization on the poly(vinyl alcohol) (PVA) interlayered poly(ether sulfone) (PES) ultrafiltration support. Owing to the large surface area, great hydrophilicity, and high porosity of the PES-PVA support, a highly cross-linked polyamide separating layer was formed with a thickness of 9.6 nm, which was almost 90% thinner than that of the control membrane (TFC-C). In addition, the TFC-P possessed lower ζ-potential, smaller pore size, and greater surface area compared to that of the TFC-C, achieving an ultrahigh water permeance of 31.4 L m^-2 h^-1 bar^-1 and a 99.4% Na₂SO₄ rejection. Importantly, the PVA interlayer strategy was further applied to a pilot NF production line and the fabricated membranes presented stable water flux and salt rejections as comparable to the lab-scaled membranes. The outstanding properties of the PVA-interlayered NF membranes highlight the feasibility of the fabrication method for practical applications, which provides a new avenue to develop robust polyamide-based NF desalination membranes for environmental water treatment.

Experimental Investigation of the Effect of Implanting TiO2-NPs on PVC for Long-Term UF Membrane Performance to Treat Refinery Wastewater

This study investigated the impact of implanting TiO2-NPs within a membrane to minimize the influence of long-term operation on the membrane characteristics. Four poly vinyle chloride-titanium oxide (PVC-TiO2-NPs) membranes were prepared to create an ultrafiltration membrane (UF) that would effectively treat actual refinery wastewater. The hypothesis of this work was that TiO2-NPs would function as a hydrophilic modification of the PVC membrane and excellent self-cleaning material, which in turn would greatly extend the membrane's lifetime. The membranes were characterized via Fourier transforms infrared spectroscopy (FTIR), X-ray diffraction (XRD), energy dispersive X-ray (EDX), atomic force microscope (AFM), and scanning electron microscope (SEM). The removal efficiency of turbidity, total suspended solid (TSS), oil and grease, heavy metals and chemical oxygen demand (COD) were investigated. Contact angle (CA) reduced by 12.7% and 27.5% on the top and bottom surfaces, respectively. The PVC membrane with TiO2-NPs had larger mean pore size on its surface and more holes with larger size inside the membrane structure. The addition of TiO2-NPs could remarkably enhance the antifouling property of the PVC membrane. The pure water permeability (PWP) of the membrane was enhanced by 95.3% with an increase of TiO2 to 1.5 gm/100gm. The PWP after backwashing was reduced from 22.3% for PVC to 10.1% with 1.5 gm TiO2-NPs. The long-term performance was improved from five days for PVC to 23 d with an increase in TiO2-NPs to 1.5 gm. The improvements of PVC-TiO2-NPs long-term were related to the enhancement of the hydrophilic character of the membrane and increase tensile strength due to the reinforcement effect of TiO2-NPs. These results clearly identify the impact of the TiO2-NPs content on the long-term PVC/TiO2-NPs performance and confirm our hypothesis that it is possible to use TiO2-NPs to effectively enhance the lifetime of membranes during their long-term operation.

Effect of aeration rate on the anti-biofouling properties of cellulose acetate nanocomposite membranes in a membrane bioreactor system for the treatment of pharmaceutical wastewater

In this study, the effect of aeration rate in terms of specific aeration demand per membrane area (SADm) on the anti-biofouling properties of cellulose acetate (CA) nanocomposite membranes (CA/ND-NH₂) in a membrane bioreactor system was investigated. The amount of EPS and soluble EPS under high aeration rate conditions was observed to be higher than under low aeration rate conditions. The results obtained showed that either lower or higher aeration rates had a negative impact on membrane permeability. The high aeration rate resulted in a severe breakage of sludge flocs, and promoted the release of soluble EPS from the microbial flocs to the bioreactor tank. By increasing the aeration rate, the COD removal increased and decreased respectively for the membranes and the activated sludge. It was finally concluded that higher anti-biofouling properties of neat CA and nanocomposite membranes were obtained under optimal aeration rate conditions (SADm = 1 m³ m^-2 h^-1).

In Situ Assembly of a Zeolite Imidazolate Framework Hybrid Thin-Film Nanocomposite Membrane with Enhanced Desalination Performance Induced by Noria-Polyethyleneimine Codeposition

Zeolite imidazolate framework-8 (ZIF-8) has emerged as an excellent candidate for the preparation of thin-film nanocomposite (TFN) membranes. Nevertheless, it still remains a great challenge to make the effective incorporation of ZIF-8 into the resulting TFN membrane feasible for facile application. Herein, we propose an in situ strategy to fabricate a ZIF-8 nanocrystal hybrid reverse osmosis membrane induced by the ultrafast surface modification of Noria-polyethyleneimine codeposition. By this method, ZIF-8 nanocubes with monodispersity were first formed on a modified support through the step-by-step deposition of precursor solutions. Afterward, a TFN membrane was fabricated by interfacial polymerization (IP) on a ZIF-8 loaded support. Due to the significantly altered IP process induced by the coexistence of Noria and ZIF-8 on the support surface, the TFN membrane depicts a distinct nanostrand-nanoparticle hybrid morphology, which endows the TFN membrane with excellent antifouling ability. Moreover, the permeance of the as-fabricated TFN membrane is up to 3.64 L·m^-2·h^-1·bar^-1, nearly 2.7-fold higher than that of the nascent membrane, while it still maintains a high rejection toward NaCl. The in situ assembly strategy reported here could also pave a promising way for the fabrication of TFN membranes with other nanomaterials in future.

Chitosan functionalization of titanium and Ti6Al4V alloy with chloroacetic acid as linker agent

In this work, a new covalent grafting of chitosan on titanium and Ti6Al4V alloy surfaces is reported using chloroacetic acid as linker agent. Good results were obtained both on titanium and on Ti6Al4V alloy. The effect of the surface acid pretreatments on the subsequent functionalization with chitosan is evaluated. The morphological aspect of acid etched metal surfaces before chitosan grafting has been characterized by scanning electron microscopy (SEM). The presence of carboxylic groups on metal surfaces and then the efficiency of chitosan covalent immobilization were detected by Fourier transformed infrared-Attenuated Total Reflectance (FTIR-ATR) and X-Ray photoelectron spectroscopy (XPS). Cyclic voltammetry tests, using the functionalized titanium and Ti6Al4V samples as electrodes, were conducted in different aqueous solutions, to detect the presence of the homogeneous overlayer of chitosan on the surface, and to evaluate the importance of the carboxyl groups as linker agent.

Progress of Nanocomposite Membranes for Water Treatment

The use of membrane-based technologies has been applied for water treatment applications; however, the limitations of conventional polymeric membranes have led to the addition of inorganic fillers to enhance their performance. In recent years, nanocomposite membranes have greatly attracted the attention of scientists for water treatment applications such as wastewater treatment, water purification, removal of microorganisms, chemical compounds, heavy metals, etc. The incorporation of different nanofillers, such as carbon nanotubes, zinc oxide, graphene oxide, silver and copper nanoparticles, titanium dioxide, 2D materials, and some other novel nano-scale materials into polymeric membranes have provided great advances, e.g., enhancing on hydrophilicity, suppressing the accumulation of pollutants and foulants, enhancing rejection efficiencies and improving mechanical properties and thermal stabilities. Thereby, the aim of this work is to provide up-to-date information related to those novel nanocomposite membranes and their contribution for water treatment applications.