Surface modification of UF membranes with functionalized MWCNTs to control membrane fouling by NOM fractions

Advances in Membrane Separation for Biomaterial Dewatering

Biomaterials often contain large quantities of water (50-98%), and with the current transition to a more biobased economy, drying these materials will become increasingly important. Contrary to the standard, thermodynamically inefficient chemical and thermal drying methods, dewatering by membrane separation will provide a sustainable and efficient alternative. However, biomaterials can easily foul membrane surfaces, which is detrimental to the performance of current membrane separations. Improving the antifouling properties of such membranes is a key challenge. Other recent research has been dedicated to enhancing the permeate flux and selectivity. In this review, we present a comprehensive overview of the design requirements for and recent advances in dewatering of biomaterials using membranes. These recent developments offer a viable solution to the challenges of fouling and suboptimal performances. We focus on two emerging development strategies, which are the use of electric-field-assisted dewatering and surface functionalizations, in particular with hydrogels. Our overview concludes with a critical mention of the remaining challenges and possible research directions within these subfields.

Designing sustainable membrane-based water treatment via fouling control through membrane interface engineering and process developments

Membrane-based water treatment processes have been established as a powerful approach for clean water production. However, despite the significant advances made in terms of rejection and flux, provision of sustainable and energy-efficient water production is restricted by the inevitable issue of membrane fouling, known to be the major contributor to the elevated operating costs due to frequent chemical cleaning, increased transmembrane resistance, and deterioration of permeate flux. This review provides an overview of fouling control strategies in different membrane processes, such as microfiltration, ultrafiltration, membrane bioreactors, and desalination via reverse osmosis and forward osmosis. Insights into the recent advancements are discussed and efforts made in terms of membrane development, modules arrangement, process optimization, feed pretreatment, and fouling monitoring are highlighted to evaluate their overall impact in energy- and cost-effective water treatment. Major findings in four key aspects are presented, including membrane surface modification, modules design, process integration, and fouling monitoring. Among the above mentioned anti-fouling strategies, a large part of research has been focused on membrane surface modifications using a number of anti-fouling materials whereas much less research has been devoted to membrane module advancements and in-situ fouling monitoring and control. At the end, a critical analysis is provided for each anti-fouling strategy and a rationale framework is provided for design of efficient membranes and process for water treatment.

Application of cellulose nanocrystals in water treatment membranes: A review

Nanomaterials have brought great changes to human society, and development has gradually shifted the focus to environmentally friendly applications. Cellulose nanocrystals (CNCs) are new one-dimensional nanomaterials that exhibit environmental friendliness and ensure the biological safety of water environment. CNCs have excellent physical and chemical properties, such as simple preparation process, nanoscale size, high specific surface area, high mechanical strength, good biocompatibility, high hydrophilicity and antifouling ability. Because of these characteristics, CNCs are widely used in ultrafiltration membranes, nanofiltration membranes and reverse osmosis membranes to solve the problems hindering development of membrane technology, such as insufficient interception and separation efficiency, low mechanical strength and poor antifouling performance. This review summarizes recent developments and uses of CNCs in water treatment membranes and discusses the challenges and development prospects of CNCs materials from the perspectives of ecological safety and human health by comparing them with traditional one-dimensional nanomaterials.

Rheological properties of wood/bacterial cellulose and chitin nano-hydrogels as a function of concentration and their nano-films properties

In this study, rheological properties of the Wood Cellulose NanoFibers (WCNF), Bacterial Cellulose NanoFibers (BCNF), and Chitin NanoFibers (ChNF) as well as physical properties of films prepared from each nano‐hydrogel were investigated. Each nano‐hydrogel was prepared in 2 concentrations of 0.5 and 1 wt% for rheological study. Rheological properties were measured using a rotational rheometer. The flow behaviour data were fitted with rheological models. Apparent viscosity was higher in higher concentrations of nano‐hydrogels. Herschel‐Bulkley model was the best model for flow behaviour data fitting. BCNF nano‐hydrogels had the highest hysteresis loop while WCNF nano‐hydrogels had the best structure recovery and lowest hysteresis loop. At LVE (Linear Viscoelastic Region), G′ (storage modulus) and G″ (loss modulus) had a constant value, but as strain increased their values decreased. Storage modulus was found to be greater than loss modulus in all samples during frequency sweep test. BCNF nano‐hydrogel showed the lowest frequency dependency. Chitin nanofilms had the highest elongation and stress value.

Lignocellulosic Biomass-Derived Nanocellulose Crystals as Fillers in Membranes for Water and Wastewater Treatment: A Review

The improvement of membrane applications for wastewater treatment has been a focal point of research in recent times, with a wide variety of efforts being made to enhance the performance, integrity and environmental friendliness of the existing membrane materials. Cellulose nanocrystals (CNCs) are sustainable nanomaterials derived from microorganisms and plants with promising potential in wastewater treatment. Cellulose nanomaterials offer a satisfactory alternative to other environmentally harmful nanomaterials. However, only a few review articles on this important field are available in the open literature, especially in membrane applications for wastewater treatment. This review briefly highlights the circular economy of waste lignocellulosic biomass and the isolation of CNCs from waste lignocellulosic biomass for membrane applications. The surface chemical functionalization technique for the preparation of CNC-based materials with the desired functional groups and properties is outlined. Recent uses of CNC-based materials in membrane applications for wastewater treatment are presented. In addition, the assessment of the environmental impacts of CNCs, cellulose extraction, the production techniques of cellulose products, cellulose product utilization, and their end-of-life disposal are briefly discussed. Furthermore, the challenges and prospects for the development of CNC from waste biomass for application in wastewater treatment are discussed extensively. Finally, this review unraveled some important perceptions on the prospects of CNC-based materials, especially in membrane applications for the treatment of wastewater.

The nitrogen-doped multi-walled carbon nanotubes modified membrane activated peroxymonosulfate for enhanced degradation of organics and membrane fouling mitigation in natural waters treatment

The synthesized catalyst nitrogen-doped multi-walled carbon nanotubes (N-MWCNTs) were introduced into membrane technology for peroxymonosulfate (PMS) activation. The enhanced permeability of the N-MWCNTs-modified membrane might be attributed to the increase in hydrophilicity and membrane porosity. The catalytic degradation and membrane filtration performance for the N-MWCNTs-modified membrane/PMS system in treating different types of natural waters were evaluated. The removal of phenol by the N-MWCNTs-modified membrane was 83.67% in 2 min, which was greater than the phenol removal by the virgin membrane (3.39%) and N-MWCNT powder (41.42%), respectively. Moreover, the resultant membrane coupled with PMS activation exhibited outstanding removal effects on the fluorescent organics in the secondary effluent and Songhua River water. The combination effectively reduced the total membrane fouling caused by the secondary effluent, Songhua River water, and three typical model organics by 28.19-61.98%. Electron paramagnetic resonance and classical quenching tests presented that the active species (SO4·-, ·OH, and 1O2) and other non-radical processes generated by N-MWCNTs activated PMS decreased the foulants deposition on the membrane surface. Meanwhile, the membrane interception accelerated the aggregation of pollutants and PMS towards the membrane surface through applied pressure, facilitating their mass transfer to the N-MWCNTs surface for the catalysis exerted more effectively. This study demonstrated the potential application of the coupling of N-MWCNTs catalytic oxidation and the UF, which offers a promising prospect to improve the permeate quality and simultaneously overcome the membrane fouling barriers.

Removal of Humic Acid Using 3-Methacryloxypropyl Trimethoxysilane Functionalized MWCNT Loaded TiO2/PES Hybrid Membrane

In the present work, a highly efficient mixed matrix membrane (MMM) for humic acid (HA) removal was developed. Multiwalled carbon nanotubes (MWCNTs) were functionalized in the presence of 3-methacryloxypropyl trimethoxysilane using the co-condensation method and were subsequently loaded with TiO2 (prepared via the sol-gel route). The as-prepared material was then incorporated into a PES polymer solution to prepare a fMWCNT-TiO2/PES hybrid membrane via non-solvent induced phase inversion. The microstructure of the membrane was characterized using Fourier transform infrared spectroscopy, atomic force microscopy, scanning electron microscopy, water contact angle, thickness, porosity, and pore size. The fMWCNT-TiO2/PES hybrid membrane was tested for the removal of HA and antifouling performance. The results show that the surface hydrophilicity of the membranes was greatly improved upon the addition of the fMWCNT-TiO2 particles. The results show that 92% of HA was effectively removed after 1 h of filtration. In comparison with pristine membrane, the incorporation of fMWCNT-TiO2 nanoparticles led to enhanced pure water flux (99.05 L/m2 h), permeate flux (62.01 L/m2 h), higher HA rejection (92%), and antifouling improvement (RFR: 37.40%, FRR: 86.02%). Thus, the fMWCNT-TiO2/PES hybrid membrane is considered to be a great potential membrane for the improvement of ultrafiltration membranes.

Identifying the fouling behavior of forward osmosis membranes exposed to different inorganic components with high ionic strength

Functionalized multiwalled carbon nanotube (f-MWCNT) mixed matrix forward osmosis (FO) membranes were fabricated by phase inversion, and the mechanism of sodium alginate (SA) membrane fouling in the presence of various inorganic components with high ionic strength was thoroughly investigated. The membrane incorporated with 0.5% f-MWCNTs (M-0.5) exhibited enhanced performance, which was attributed to the hydrophilicity of the modified nanoparticles and their good compatibility with the cellulose acetate (CA) substrate. Moreover, it was found that the initial permeate flux decline rate for all FO membranes investigated followed the order Na⁺ + Ca²⁺ + Mg²⁺ > Na⁺ + Ca²⁺ > Na⁺ + Mg²⁺ > Na⁺, which was attributed to the particle size of SA macromolecules in the corresponding solutions. However, the gradual change in attenuation was consistent with adhesion force observations made for the SA-fouled FO membrane in the later steady-state stage, and there was little difference among M-0 (without f-MWCNTs), M-0.5, and M-1 (with 1% f-MWCNTs). Furthermore, the SA adsorption layer was most compact in the presence of Ca²⁺, and the flux recovery rate (FRR) was the lowest after simple hydraulic cleaning, but the overall FRRs for FO membranes were greater than 85%. This implies that although a decrease in electrostatic repulsion leads to the formation of a compact fouling layer, an increase in hydration repulsion of hydrated salt ions plays a major role in membrane fouling under high ionic strength conditions.

Fabrication of a hybrid ultrafiltration membrane based on MoS2 modified with dopamine and polyethyleneimine

The hydrophobicity of ultrafiltration membranes is the main cause of membrane fouling and reduced permeability, so it is necessary to improve the hydrophilicity and anti-fouling performance of ultrafiltration membrane materials. MoS₂ nanoparticles that were modified with polydopamine (PDA) and polyethyleneimine (PEI), named MoS₂-PDA-PEI, were added to fabricate a polyethersulfone ultrafiltration membrane (PES/MoS₂-PDA-PEI) for the first time. The effects of modified MoS₂ nanoparticles on membrane performance were clarified. The results indicated that the permeability, rejection, and anti-fouling capability of the hybrid PES/MoS₂-PDA-PEI membrane have been improved compared with the pristine PES membrane. When the content of MoS₂-PDA-PEI nanoparticles in the membrane is 0.5%, the pure water flux of the hybrid membrane reaches 364.03 L m⁻² h⁻¹, and the rejection rate of bovine serum albumin (BSA) and humic acid (HA) is 96.5% and 93.2% respectively. The flux recovery rate of HA reached 97.06%. As expected, the addition of MoS₂-PDA-PEI nanoparticles promotes the formation of the porous structure and improves the hydrophilicity of the membrane, thereby improving its antifouling performance.

The hydrophobicity of ultrafiltration membranes is the main cause of membrane fouling and reduced permeability, so it is necessary to improve the hydrophilicity and anti-fouling performance of ultrafiltration membrane materials.

Review on characteristics of biomaterial and nanomaterials based polymeric nanocomposite membranes for seawater treatment application

Membrane technology, especially nanofiltration (NF) has great attention to provide an imperative solution for water issues. The membrane is considered to be the heart in the separation plant. Understanding the membrane characteristics could allow predicting and optimizing the membrane performance namely flux, rejection and reduced fouling. The membrane development using biomaterials and nanomaterials provides a remarkable opportunity in the water application. This review focuses on the membrane characteristics of biomaterials and nanomaterials based nanofiltration. In this review, recent researches based on biomaterials and nanomaterials loaded membrane for salt rejection have been analyzed. Membrane fouling depends on the membrane characteristics and this review defined fouling as a ubiquitous bottleneck challenge that hampers the NF blooming applications. Fouling mitigation strategies via membrane modification using biomaterial (chitosan, curcumin and vanillin) and various other nanomaterials are critically reviewed. This review also highlights the membrane cleaning and focuses on concentrates disposal methods with zero liquid discharge system for resource recovery. Finally, the conclusion and future prospects of membrane technology are discussed. From this current review, it is apparent that the biomaterial and various other nanomaterials acquire exclusive properties that facilitate membrane advancement with improved capability for water treatment. Regardless of membrane material developments, still exist considerable difficulties in membrane commercialization. Thus, additional studies related to this field are needed to produce membranes with better performance for large‒scale applications.

Preparation of Ultrafiltration Membrane by Polyethylene Glycol Non-Covalent Functionalized Multi-Walled Carbon Nanotubes: Application for HA Removal and Fouling Control

Polyethylene glycol (PEG) non-covalent-functionalized multi-walled carbon nanotubes (MWCNT) membrane were prepared by vacuum filtration. The dispersion and stability of MWCNT non-covalent functionalized with PEG were all improved. TEM characterization and XPS quantitative analysis proved that the use of PEG to non-covalent functionalize MWCNT was successful. SEM image analysis confirmed that the pore size of PEG–MWCNT membrane was more concentrated and distributed in a narrower range of diameter. Contact angle measurement demonstrated that PEG non-covalent functionalization greatly enhanced the hydrophilicity of MWCNT membranes. The results of pure water flux showed that the PEG–MWCNT membranes could be categorized into low pressure membrane. PEG-MWCNT membrane had a better effect on the removal of humic acid (HA) and a lower TMP growth rate compared with a commercial 0.01-μm PVDF ultrafiltration membrane. During the filtration of bovine serum albumin (BSA), the antifouling ability of PEG-MWCNT membranes were obviously better than the raw MWCNT membranes. The TMP recovery rate of PEG–MWCNT membrane after cross flushing was 79.4%, while that of raw MWCNT–_COOH and MWCNT membrane were only 14.9% and 28.3%, respectively. PEG non-covalent functionalization improved the antifouling ability of the raw MWCNT membranes and reduced the irreversible fouling, which effectively prolonged the service life of MWCNT membrane.

Aerobic granular sludge (AGS) scouring to mitigate membrane fouling: Performance, hydrodynamic mechanism and contribution quantification model

Aerobic granular sludge (AGS) has been proven to have a low fouling potential in membrane bioreactor (MBR). Nevertheless, AGS scouring effect on mitigating membrane fouling remains poorly investigated. The main objective of this study is to examine AGS-MBR performance, to reveal the AGS scouring mechanism and quantify its contribution rate to membrane fouling mitigation, from the views of theory and experiment. Above all, AGS-MBR exhibited a low fouling rate ((transmembrane pressure (TMP) kept below 20 kPa) without membrane cleaning and a higher removal of organics and nutrients than conventional MBR during 80 days' sludge granulation process. Then, flocculent sludge (FS) with various AGS ratios was applied to simulate the sludge granulation phase. When AGS ratio increased from 0% to 100%, the permeate flux gradually elevated from 40.0 L m^-2h^-1 to 92.9 L m^-2h^-1, and fouling resistance decreased from 9.0 × 10^-12m^-1 to 3.9 × 10^-12m^-1 benefiting from the loose structure and high porosity of AGS fouling layer. Meanwhile, the scouring effect produced by AGS on the membrane fouling mitigation was investigated. Based on the momentum conservation, a new hydrodynamic model was developed to explain the scouring mechanism of AGS. The scouring stress, proportional to the total amount of AGS depositing on the membrane surface, effectively reinforced the collision between AGS and FS, and reduced their deposition on the membrane surface by friction with the membrane; thus it was further conducive to membrane fouling mitigation. Moreover, a novel contribution quantification model was proposed for analyzing the contribution rate of AGS scouring effect to mitigate membrane fouling. AGS scouring possessed a significant contribution rate (39.9%) for fouling mitigation, compared with AGS structure (50.3%) and hydraulic stress (9.7%). In final, this study provides an in-depth understanding to mitigate the MBR membrane fouling by the unique advantages of sludge granulation.

Novel strategy for membrane biofouling control in MBR with CdS/MIL-101 modified PVDF membrane by in situ visible light irradiation

Novel control strategies for membrane biofouling with eco-friendly photocatalytic technology are critically needed in practical operation of membrane bioreactors (MBRs). In this study, a metal-organic frameworks (MOF) based photocatalytic membrane was firstly applied in an anammox MBR for a long-term biofouling control, where bacteria were inactivated and foulants were degraded simultaneously, with environmentally friendly and renewable visible light energy. By physicochemical characterization, the synthesized photocatalyst of CdS/MIL-101 showed superior visible-light photocatalytic ability, and the 1 wt% CdS/MIL-101 modified membrane C2 showed enhanced hydrophilicity and water permeability compared with the pristine membrane C0. In the long-term operation of anammox MBRs under waterproof lights irradiation, the filtration cycles of C2 (25-26 d) were obviously extended compared with C0 (10-14 d), while their average total nitrogen removal efficiencies were comparable up to 84%, indicating an excellent biofouling alleviation effect by using C2 with a satisfactory nitrogen removal performance maintained. By analysis of the biofilm on the fouled membranes, the organic foulants (especially extracellular polymeric substances) were degraded, and the live bacteria were inactivated effectively by the photocatalytic reactions of CdS/MIL-101 on C2. In the antimicrobial tests against model bacteria, C2 exhibited remarkable antimicrobial effect against both Gram-negative and Gram-positive bacteria with visible light irradiation by destruction of cell integrity with the inhibition rate of 92% for Escherichia coli and 95% for Staphylococcus aureus, respectively. In the model foulants (bovine serum albumin, sodium alginate, and humic acid) filtration tests, C2 showed higher antifouling capabilities, lower flux declining rates, and higher foulants rejection rates under visible light irradiation compared with C0. The reactive species of ·OH, e^- and h⁺ generated on C2 were verified to play the predominant role in the anti-biofouling processes by simultaneous bacteria inactivation and foulants degradation. The findings offer a novel insight into the biofouling controlling in MBRs by simultaneous bacteria inactivation and foulants degradation with an eco-friendly method.

Microfiltration Membranes Modified with Silver Oxide by Plasma Treatment

Microfiltration (MF) membranes have been widely used for the separation and concentration of various components in food processing, biotechnology and wastewater treatment. The deposition of components from the feed solution and accumulation of bacteria on the surface and in the membrane matrix greatly reduce the effectiveness of MF. This is due to a decrease in the separation efficiency of the membrane, which contributes to a significant increase in operating costs and the cost of exploitative parts. In recent years, significant interest has arisen in the field of membrane modifications to make their surfaces resistant to the deposition of components from the feed solution and the accumulation of bacteria. The aim of this work was to develop appropriate process parameters for the plasma surface deposition of silver oxide (AgO) on MF polyamide membranes, which enables the fabrication of filtration materials with high permeability and antibacterial properties.

Tailored CNTs Buckypaper Membranes for the Removal of Humic Acid and Separation of Oil-in-Water Emulsions

Carbon nanotubes (CNTs) are a robust material and proven as a promising candidate for a wide range of electronic, optoelectronic and environmental applications. In this work, two different methods were utilized for the preparation of CNTs exhibiting different aspect ratios via chemical vapor deposition (CVD). The as-prepared CNTs were analyzed using scanning electron microscopy (SEM), transmission electron microscopy (TEM), N₂adsorption isotherms, thermogravimetric analysis and Raman spectroscopy in order to investigate their morphological and structural properties. Free-standing CNTs "buckypaper" membranes were fabricated, characterized and tailored to meet the requirements of two applications, i.e., (1) the removal of humic acid (HA) from water and (2) separation of oil-in-water emulsions. It was revealed that the hydrophobic buckypapers showed high separation performance for Shell oil-in-water emulsions filtration, with up to 98% through the accumulation of oil droplets onto the membrane surface. The absorption capacity of buckypaper membranes for various organic liquids (oil, chloroform and toluene) was evaluated over 10 absorption cycles to investigate their recyclability and robustness. Moreover, surface modification was introduced to the pristine CNTs to increase their surface hydrophilicity and improve the pure water permeability of buckypapers. These modified buckypapers showed high flux for HA solutions and excellent HA rejection efficiency up to 95%via size exclusion and electrostatic repulsion mechanisms.

Pre-deposited dynamic membrane filtration - A review

A dynamic membrane (DM) is a layer of particles deposited via permeation drag onto a conventional membrane, such that the deposited particles act as a secondary membrane that minimizes fouling of the primary membrane to lower transmembrane pressures (TMP) and enable higher permeate fluxes. Since the first DM was created in 1966 at the Oak Ridge National Laboratory, numerous studies have reported synthesis of DMs using various materials and explored their abilities to perform reverse osmosis (RO), nanofiltration (NF), ultrafiltration (UF) and microfiltration (MF). DMs are classified into two categories, namely, (i) self-formed, whereby the feed constituents form the DM; and (ii) pre-deposited, whereby the DM is formed by a layer of particles other than the feed prior to introduction of the feed. This paper endeavors to present a comprehensive review of the state-of-the-art on the latter. Key materials used as DMs, their formation and various factors influencing it, regeneration of DMs and modifications to DM systems for performance enhancement are discussed. The role of DMs in preventing fouling in the primary membrane (PM) is explained. The applications of DMs in four major areas, namely, salt and organic solute rejection, treatment of industrial effluents, treatment of water and wastewater, and oily-wastewater treatment are reviewed. Furthermore, technical and economic advantages of DMs over conventional processes are considered, and challenges in current DM research are discussed. Finally, directions for future research are suggested.

Recent advances in mitigating membrane biofouling using carbon-based materials

Biofouling is the Achilles Heel of membrane processes. The accumulation of organic foulants and growth of microorganisms on the membrane surface reduce the permeability, shorten the membrane life, and increase the energy consumption. Advancements in novel carbon-based materials (CBMs) present significant opportunities in mitigating biofouling of membrane processes. This article provides a comprehensive review of the recent progress in the application of CBMs in antibiofouling membrane. It starts with a detailed summary of the different antibiofouling mechanisms of CBM-containing membrane systems. Next, developments in membrane modification using CBMs, especially carbon nanotubes and graphene family materials, are critically reviewed. Further, the antibiofouling potential of next-generation carbon-based membranes is surveyed. Finally, the current problems and future opportunities of applying CBMs for antibiofouling membranes are discussed.

High-Flux, Antifouling Hydrophilized Ultrafiltration Membranes with Tunable Charge Density Combining Sulfonated Poly(ether sulfone) and Aminated Graphene Oxide Nanohybrid

In this work, a new protocol was developed for creating charge-tuned, hydrophilic hybrid ultrafiltration (UF) membranes with high flux, rejection rate, and fouling resistance. The membranes were fabricated using a combination of sulfonated poly(ether sulfone) (SPES) and aminated graphene (GO-SiO₂-NH₂) nanohybrid via the non-solvent-induced phase separation (NIPS) method. The GO-SiO₂-NH₂ nanohybrid was first synthesized using GO nanosheets and 3-aminopropyl triethoxysilane (APTES) through the covalent condensation reaction at 80 °C and was thoroughly characterized. Then, 2-8 wt% of the nanohybrid was incorporated into the matrix of SPES for the fabrication of the hybrid membranes. The resulting membranes were characterized using an electrokinetic analyzer, a contact angle goniometer, and Raman, field emission scanning electron microscopy-energy-dispersive X-ray spectrometry (FESEM-EDX), and atomic force microscopy experiments. The porosity, charge density, and surface morphology were altered, and the hybrid membranes became more hydrophilic after the incorporation of the nanohybrid. The pure water flux of the hybrid membranes systematically increased with the loading amount of the nanohybrid. The pure water flux of the hybrid membrane containing 6 wt% GO-SiO₂-NH₂ nanohybrid at a 2 bar feed pressure was 537 L m^-2 h^-1, about 3-fold that of pristine membrane (186 L m^-2 h^-1). The fouling resistance of the hybrid membranes was evaluated and confirmed using several representative foulants, including bovine serum albumin, humic acid, sodium alginate, and a synthetic solution of natural organic matter (NOM). The fabricated membranes were capable of removing more than 97% of NOM, without a compromise of their rejection rate.

Improving ultrafiltration membrane performance with pre-deposited carbon nanotubes/nanofibers layers for drinking water treatment

To efficiently improve the performance of ultrafiltration (UF) membrane for drinking water treatment, carbon nanotubes (CNTs) and carbon nanofibers (CNFs) were utilized as pre-deposited coating layers on membrane surface. A comparative study between these two carbon nanomaterials for enhancing pollutants removal and mitigating membrane fouling induced by natural organic matter (NOM) was carried out. The surface morphologies were characterized by scanning electron microscopy, and the results indicated that the CNTs coating layer was more dense and homogeneous with a smaller pore size than that of CNFs. The removal and antifouling performance of CNTs/CNFs coated membranes were investigated with typical NOM, i.e., humic acid, bovine serum albumin, sodium alginate, as well as natural surface water. The results showed that the presence of coating layers was very effective to improve the rejection rate of NOM, among which CNTs exhibited significant better performance than CNFs. The fouling control performance was influenced by the NOM fraction and coating mass (6-50 g/m²). Generally, CNTs coating layer was more efficient in alleviating both reversible and irreversible membrane fouling, while CNFs exhibited limited effect on irreversible fouling control. Both pre-adsorption and size exclusion contributed to the rejection of membrane foulants, thus reducing the organics directly contacted with the underlying membrane. In natural surface water treatment, the pre-deposited coating layers significantly delayed the transition of fouling mechanisms from pore blocking to cake filtration. The experimental results were expected to illustrate the feasibility of pre-deposited CNTs/CNFs layers for enhancing membrane performance during drinking water treatment.

Modular Molecular Nanoplastics

In view of their facile fabrication and recycling, functional materials that are built from small molecules ("molecular plastics") may represent a cost-efficient and sustainable alternative to conventional covalent materials. We show how molecular plastics can be made robust and how their (nano)structure can be tuned via modular construction. For this purpose, we employed binary composites of organic nanocrystals based on a perylene diimide derivative, with graphene oxide (GO), bentonite nanoclay (NC), or hydroxyethyl cellulose (HEC), that both reinforce and enable tailoring the properties of the membranes. The hybrids are prepared via a simple aqueous deposition method, exhibit enhanced mechanical robustness, and can be recycled. We utilized these properties to create separation membranes with tunable porosity that are easy to fabricate and recycle. Hybrids 1/HEC and 1/NC are capable of ultrafiltration, and 1/NC removes heavy metals from water with high efficiency. Hybrid 1/GO shows mechanical properties akin to covalent materials with just 2-10% (by weight) of GO. This hybrid was used as a membrane for immobilizing β-galactosidase that demonstrated long and stable biocatalytic activity. Our findings demonstrate the utility of modular molecular nanoplastics as robust and sustainable materials that enable efficient tuning of structure and function and are based on self-assembly of readily available inexpensive components.

Surface coating of UF membranes to improve antifouling properties: A comparison study between cellulose nanocrystals (CNCs) and cellulose nanofibrils (CNFs)

The inherent properties of hydrophilicity and environmental preferability of cellulose nanocrystals (CNCs) and cellulose nanofibers (CNFs) make them great candidates for application in water-treatment membranes. In this study, the antifouling properties of CNCs and CNFs, modified ultrafiltration (UF) membranes, were directly compared. A facile modification method was conducted by coating CNCs and CNFs on the surface of polyethersulfone (PES) membranes to prepare CNC-coating membranes and the CNF-coating membranes. Membrane surface morphology was characterized by atomic force microscopy (AFM), and the results showed that the CNF-coating membranes exhibited greater surface roughness than the CNC-coating membranes. Pure water flux measurements demonstrated that the flux of the CNC-coating membranes was slightly lower than that of the CNF-coating membranes. Antifouling properties were evaluated and compared for the two types of membranes by filtration of NOM foulant models, humic acid (HA) and bovine serum albumin (BSA). The results showed that the antifouling properties of the modified membranes were enhanced through the coating of either CNCs or CNFs to a control PES membrane. The CNC-coating membranes outperformed the CNF-coating membranes in alleviating both reversible fouling and irreversible fouling caused by HA and BSA. In addition, the antifouling performance of the coating membranes was enhanced with increased coating content.

Incorporation of Cellulose Nanocrystals (CNCs) into the Polyamide Layer of Thin-Film Composite (TFC) Nanofiltration Membranes for Enhanced Separation Performance and Antifouling Properties

To achieve greater separation performance and antifouling properties in a thin-film composite (TFC) nanofiltration membrane, cellulose nanocrystals (CNCs) were incorporated into the polyamide layer of a TFC membrane for the first time. The results of Fourier transform infrared spectroscopy and X-ray photoelectron spectroscopy (XPS) confirmed the successful formation of the CNC-polyamide composite layer. Surface characterization results revealed differences in the morphologies of the CNC-TFC membranes compared with a control membrane (CNC-TFC-0). Streaming potential measurements and molecular weight cutoff (MWCO) characterizations showed that the CNC-TFC membranes exhibited a greater negative surface charge and a smaller MWCO as the CNC content increased. The CNC-TFC membranes showed enhanced hydrophilicity and increased permeability. With the incorporation of only 0.020 wt % CNCs, the permeability of the CNC-TFC membrane increased by 60.0% over that of the polyamide TFC without CNC. Rejection of Na₂SO₄ and MgSO₄ by the CNC-TFC membranes was similar to that observed for the CNC-TFC-0 membrane, at values of approximately 98.7% and 98.8%, respectively, indicating that divalent salt rejection was not sacrificed. The monovalent ion rejection tended to increase as the CNC content increased. In addition, the CNC-TFC membranes exhibited enhanced antifouling properties due to their increased hydrophilicity and more negatively charged surfaces.

Stable Superhydrophobic Ceramic-Based Carbon Nanotube Composite Desalination Membranes

Membrane distillation (MD) is a promising process for the treatment of highly saline wastewaters. The central component of MD is a stable porous hydrophobic membrane with a large liquid-vapor interface for efficient water vapor transport. A key challenge for current polymeric or hydrophobically modified inorganic membranes is insufficient operating stability, resulting in some issues such as wetting, fouling, flux, and rejection decline. This study presents an overall conceptual design and application strategy for a superhydrophobic ceramic-based carbon nanotube (CNT) desalination membrane having specially designed membrane structures with unprecedented operating stability and MD performance. Superporous and superhydrophobic surface structures with CNT networks are created after quantitative regulation of in situ grown CNT. The fully covered CNT layers (FC-CNT) exhibit significantly improved thermally and superhydrophobically stable properties under an accelerated stability test. Due to the distinctive structure of the superporous surface network, providing a large liquid-vapor superhydrophobic interface and interior finger-like macrovoids, the FC-CNT membrane exhibits a stable high flux with a 99.9% rejection of Na⁺, outperforming existing inorganic membranes. Under simple and nondestructive electrochemically assisted direct contact MD (e-DCMD), enhanced antifouling performance is observed. The design strategy is broadly applicable to be extended toward fabrication of high performance membranes derived from other ceramic or inorganic substrates and additional applications in wastewater and gas treatment.

A One-Step Rapid Assembly of Thin Film Coating Using Green Coordination Complexes for Enhanced Removal of Trace Organic Contaminants by Membranes

We report a fast, simple, and green coating method using the coordination complex of tannic acid (TA) and ferric ion (Fe³⁺) to enhance the removal of trace organic contaminants (TrOCs) by polyamide membranes. The entire coating process can be completed in less than 2 min; quartz crystal microbalance characterization revealed that a TA-Fe thin film formed in merely 10-20 s. Coating this TA-Fe thin film on a commercial nanofiltration membrane (NF270) reduced its effective pore size from 0.44 to 0.40 nm. The TA-Fe-coated NF270 showed significantly increased rejection of both NaCl and trace organic contaminants. In comparison with the more-time-consuming polydopamine coating (e.g., 0.5 h), the TA-Fe coating presented greater resistance to TrOC permeation (i.e., lower permeability of TrOCs). The advantages of the fast coating process, greatly improved rejection performance, and use of green accessible materials make TA-Fe a highly promising coating material for large-scale applications.