Immobilization of silver nanoparticle-decorated silica particles on polyamide thin film composite membranes for antibacterial properties

Sustainable Lignin-Based Nano Hybrid Biomaterials with High-Performance Antifungal Activity

Aspergillus flavus (A. flavus) and Aspergillus niger (A. niger) mainly spread through airborne fungal spores. An effective control to impede the dissemination of the spores of Aspergillus in the air affecting the environment and food was carried out. This study focuses on the sustainable rice husk-extracted lignin, nanolignin, lignin/n-lignin capped silver nanoparticles used for fungal growth inhibition. These biomaterials inhibit the growth of fungi by altering the permeability of cell membranes and influencing intracellular biosynthesis. The antifungal indexes for A. flavus and A. niger on day 5 at a concentration of 2000 μg/100 μL are 50.8 and 43.6%, respectively. The results demonstrate that the hybrid biomaterials effectively prevent the growth or generation of fungal spores. The findings of this research hold significant implications for future investigations focused on mitigating the dissemination of Aspergillus during the cultivation of agricultural products or in the process of assuring agricultural product management, such as peanuts and onions.

Enhanced Anti-Biofouling Properties of BWRO Membranes via the Deposition of Poly (Catechol/Polyamine) and Ag Nanoparticles

The surface modification of reverse osmosis (RO) membranes to improve their anti-biofouling properties is gaining increased attention. Here, we modified the polyamide brackish water reverse osmosis (BWRO) membrane via the biomimetic co-deposition of catechol (CA)/tetraethylenepentamine (TEPA) and in situ growth of Ag nanoparticles. Ag ions were reduced into Ag nanoparticles (AgNPs) without extraneous reducing agents. The hydrophilic property of the membrane was improved, and the zeta potential was also increased after the deposition of poly (catechol/polyamine) and AgNPs. Compared with the original RO membrane, the optimized PCPA3-Ag10 membrane showed a slight reduction in water flux, and the salt rejection declined, but enhanced anti-adhesion and anti-bacterial activities were observed. The FDR_t of the PCPA3-Ag10 membranes during the filtration of BSA, SA and DTAB solution were 5.63 ± 0.09%, 18.34 ± 0.33% and 34.12 ± 0.15%, respectively, much better than those of the original membrane. Moreover, the PCPA3-Ag10 membrane exhibited a 100% reduction in the number of viable bacteria (B. subtilis and E. coli) inoculated on the membrane. The stability of the AgNPs was also high enough, and these results verify the effectiveness of poly (catechol/polyamine) and the AgNP-based modification strategy for the control of fouling.

In-situ photoreduction strategy for synthesis of silver nanoparticle-loaded PVDF ultrafiltration membrane with high antibacterial performance and stability

Ultrafiltration (UF) technology using polyvinylidene fluoride (PVDF) membrane has been widely applied to water and wastewater treatment due to its low cost and simple operation process. However, PVDF-based UF membrane always encountered the issue of membrane biofouling that greatly impacted the filtration performance. In this study, we prepare a silver nanoparticle (AgNP)-loaded PVDF (Ag/PVDF) UF membrane by an in-situ photoreduction method to mitigate the membrane biofouling. Different from the previously reported method, AgNPs were synthesized in-situ by a UV photoreduction process, in which Ag⁺ ions were reduced to zero-valent Ag nanoparticles by the photo-induced reducing radicals. Antibacterial experiments showed that the inhibition efficiency of Ag/PVDF membrane to Escherichia coli reached up to ~ 99% after antibacterial treatment for 24 h. In comparison with the pristine PVDF membrane, Ag/PVDF membrane possessed a lower water contact angle (83.7° vs. 38.1°), and its pure water flux increased by 23.7%, and a high bovine serum albumin (BSA) rejection efficiency was maintained. In addition, the high stability of the Ag/PVDF composite membrane was confirmed by the extremely low releasing amount of Ag. This study provides a novel strategy for the preparation of metal nanoparticle-incorporated Ag/PVDF ultrafiltration composite membrane showing favorable antibacterial performance and stability.

The mechanism of metal-based antibacterial materials and the progress of food packaging applications: A review

Food packages have been detected carrying novel coronavirus in multi-locations since the outbreak of COVID-19, causing major concern in the field of food safety. Metal-based supported materials are widely used for sterilization due to their excellent antibacterial properties as well as low biological resistance. As the principal part of antibacterial materials, the active component, commonly referred to Ag, Cu, Zn, etc., plays the main role in inhibiting and killing pathogenic microorganisms by destroying the structure of cells. As another composition of metal-based antibacterial materials, the carrier could support and disperse the active component, which on one hand, could effectively decrease the usage amount of active component, on the other hand, could be processed into various forms to broaden the application range of antibacterial materials. Different from other metal-based antibacterial reviews, in order to highlight the detailed function of various carriers, we divided the carriers into biocompatible and adsorptable types and discussed their different antibacterial effects. Moreover, a novel substitution antibacterial mechanism was proposed. The coating and shaping techniques of metal-based antibacterial materials as well as their applications in food storage at ambient and low temperatures are also comprehensively summarized. This review aims to provide a theoretical basis and reference for researchers in this field to develop new metal-based antibacterial materials.

Inhibition of biofouling on reverse osmosis membrane surfaces by germicidal ultraviolet light side-emitting optical fibers

Biofouling of membrane surfaces poses significant operational challenges and costs for desalination and wastewater reuse applications. Ultraviolet (UV) light can control biofilms while reducing chemical usage and disinfection by-products, but light deliveries to membrane surfaces in spiral wound geometries has been a daunting challenge. Thin and flexible nano-enabled side-emitting optical fibers (SEOFs) are novel light delivery devices that enable disinfection or photocatalytic oxidation by radiating UV light from light-emitting diodes (LEDs). We envision SEOFs as an active membrane spacer to mitigate biofilm formation on reverse osmosis (RO) membranes. A lab-scale RO membrane apparatus equipped with SEOFs allowed comparison of UV-A (photocatalysis-enabled) versus UV-C (direct photolysis disinfection). Compared against systems without any light exposure, systems with UV-C light formed thinner-but denser-biofilms, prevented permeate flux declines due to biofouling, and maintained the highest salt rejection. Results were corroborated by in-situ optical coherence tomography and ex-situ measurements of biofilm growth on the membranes. Transcriptomic analysis showed that UV-C SEOFs down-regulated quorum sensing and surface attachment genes. In contrast, UV-A SEOFs upregulated quorum sensing, surface attachment, and oxidative stress genes, resulting in higher extracellular polymeric substances (EPS) accumulation on membrane surfaces. Overall, SEOFs that deliver a low fluence of UV-C light onto membrane surfaces are a promising non-chemical approach for mitigating biofouling formation on RO membranes.

Purifying water with silver nanoparticles (AgNPs)-incorporated membranes: Recent advancements and critical challenges

In the face of the growing global water crisis, membrane technology is a promising means of purifying water and wastewater. Silver nanoparticles (AgNPs) have been widely used to improve membrane performance, for antibiofouling, and to aid in photocatalytic degradation, thermal response, and electro-conductivity. However, several critical issues such as short antimicrobial periods, trade-off effects and silver inactivation seriously restrict the engineering application of AgNPs-incorporated membranes. In addition, there is controversy around the use of AgNPs given the toxic preparation process and environmental/biological risks. Hence, it is of great significance to summarize and analyze the recent developments and critical challenges in the use of AgNPs-incorporated membranes in water and wastewater treatment, and to propose potential solutions. We reviewed the different properties and functions of AgNPs and their corresponding applications in AgNPs-incorporated membranes. Recently, multifunctional, novel AgNP-incorporated membranes combined with other functional materials have been developed with high-performance. We further clarified the synergistic mechanisms between AgNPs and these novel nanomaterials and/or polymers, and elucidated their functions and roles in membrane separation. Finally, the critical challenges of AgNPs-incorporated membranes and the proposed solutions were outlined: i) Prolonging the antimicrobial cycle through long-term and controlled AgNPs release; ii) Overcoming the trade-off effect and organic fouling of the AgNPs-incorporated membranes; iii) Preparation of sustainable AgNPs-incorporated membranes; iv) Addressing biotoxicity induced by AgNPs; and v) Deactivation of AgNPs-incorporated membrane. Overall, this review provides a comprehensive discussion of the advancements and challenges of AgNPs-incorporated membranes and guides the development of more robust, multi-functional and sustainable AgNPs-incorporated membranes.

Recent progress in nanomaterial-functionalized membranes for removal of pollutants

Membrane technology has gained tremendous attention for removing pollutants from wastewater, mainly due to their affordable capital cost, miniature equipment size, low energy consumption, and high efficiency even for the pollutants present in lower concentrations. In this paper, we review the literature to summarize the progress of nanomaterial-modified membranes for wastewater treatment applications. Introduction of nanomaterial in the polymeric matrix influences membrane properties such as surface roughness, hydrophobicity, porosity, and fouling resistance. This review also covers the importance of functionalization strategies to prepare thin-film nanocomposite hybrid membranes and their effect on eliminating pollutants. Systematic discussion regarding the impact of the nanomaterials incorporated within membrane, toward the recovery of various pollutants such as metal ions, organic compounds, dyes, and microbes. Successful examples are provided to show the potential of nanomaterial-functionalized membranes for regeneration of wastewater. In the end, future prospects are discussed to develop nanomaterial-based membrane technology.

The antimicrobial effect of silver nanoparticles coated with silica against human pathogenic bacteria and fungi

The antibacterial property of silver (Ag) has been known since ancient time. It is reported in the literature that silver nanoparticles (AgNPs) exhibit improved antibacterial and antifungal properties in comparison to silver ions of equivalent metallic Ag concentration.A simple method has been used based on solenoid soles for the synthesis of nanoparticles of silver coated on silica. AgNPs were compared positively with silver nitrate solution and ampicillin standard antibiotics at a concentration of 50μg / mL (Table 1 and 2). AgNPs mentioned in the silica activity exhibited more than standard silver nitrate and antibiotics. AgNPs were fairly toxic to Salmonella sp., Neisseria sp., Klebsiella sp., and Pseudomonas sp. with an inhibition zone 21, 24, 16, 23 mm respectively. AgNPs exhibited strong antifungal activity against fungal strains (Candida sp., Aspergillus fumigatus and Aspergillus flavus) in different concentrations such as 30-50 and 60 μg/ml were examined for antifungal activity. AgNPs revealed the highest antifungal activity with the inhibition zone 26, 25 and 22 mm respectively. Results of the present study prevealed that AgNPs have a remarkable potential as antimicrobial agent in treating infectious diseases.

Comparison of the Antimicrobial and Hemolytic Activities of Various Forms of Silver (Ions, Nanoparticles, Bioconjugates) Stabilized in a Zeolite Matrix

A quantitative and qualitative comparison of the antimicrobial and hemolytic activities of silver in various states, in the form of ions, nanoparticles, and bioconjugates with the antimicrobial protein lysozyme stabilized in an inert zeolite matrix, has been carried out. A synthetic zeolite with a β structure was chosen as a zeolite matrix. Using the ion-exchange method, the method of chemical reduction, and treating the matrix with a silver hydrosol with specified characteristics, samples of zeolites with the same silver content in various forms (Ag⁺, Ag° - Ag°/Lyz) in the amounts of 0.8 and 5 wt % have been synthesized. The samples obtained were studied by a complex of physicochemical research methods: X-ray diffraction, UV absorption spectroscopy, low-temperature nitrogen adsorption, electron microscopy, and atomic absorption. Antimicrobial activity was assessed against antibiotic-resistant Gram-negative microbe (e.g., Escherichia coli ML-35, Pseudomonas aeruginosa 522/17 MDR, Klebsiella pneumoniae ESBL 344) and Gram-positive microbe (e.g., Staphylococcus aureus 1399/17). The hemolytic activity in relation to human erythrocytes was estimated. The results obtained showed significant antimicrobial activity with a simultaneously high hemolytic activity of ionic silver. Silver nanoparticles have a lower level of antimicrobial activity and toxicity. Bioconjugates of silver nanoparticles and lysozyme showed an optimal combination of antimicrobial properties and lack of hemolytic activity.

Immobilization of green-synthesized silver nanoparticles for micro- and nano-spectroscopic applications: What is the role of used short amino- and thio-linkers and immobilization procedure on the SERS spectra?

Immobilization of nanoparticles (NPs) is a technique suitable for the preparation of large-scale substrates for surface-enhanced vibrational spectroscopy including micro- and nano-spectroscopic applications. The developed immobilization method provides the enhancing properties of the roughened substrate surface to be maintained for techniques like surface-enhanced Raman scattering (SERS) spectroscopy, however, at the same time the morphology is not limiting for related near-field (scanning probe) techniques. The study is focused on the comparison of different immobilization procedures of Ag nanoparticles and finding the relationship between preparation procedures leading to convenient surface morphology and the quality of the observed signal of the model analyte (riboflavin) using SERS. Amino-linker (3-aminopropyl)trimethoxysilane (APTMS) and four thio-linkers (cysteine, 3-mercaptopropanoic acid, 2-mercaptoethanol, and 2,2'-oxydiethanthiol) using five immobilization procedures at three different temperatures (23 °C, 40 °C, and 70 °C) were compared. Surface morphology was monitored by scanning electron microscopy and atomic force microscopy. The SERS spectra of riboflavin were evaluated in terms of the intensity and the resolution of individual bands. The spectral dataset was inspected by multivariate statistical methods - principal component analysis and discriminant analysis. The evaluation of spectra and statistical models show the influence of the used linker and AgNPs immobilization procedure on the spectral output. APTMS linker is less suitable; much more appropriate are thio-linkers deposited on an evaporated Au layer on a glass slide. The best spectral parameters were obtained for 2,2'-oxydiethanthiol and 23 °C.

Antibacterial behaviour of surface modified composite polyamide nanofiltration (NF) membrane by immobilizing Ag-doped TiO2 nanoparticles

Modification of active membrane surface is an auspicious way to enhance the membrane performance. In our study, a commercially available composite polyamide Nanofiltration (NF) membrane was modified by immobilizing silver doped TiO₂ (Ag-TiO₂) nanoparticles. Ag-TiO₂ with different nanoparticles concentration (0.05, 0.1, and 0.5 wt. %) were coated on the surface of the membrane by a dip coating method. The evidence of successful coating was evaluated by Scanning Electron Microscopy coupled with Energy Dispersive Spectroscopy and Atomic Force Microscopy images. Moreover, the Attenuated Total Reflectance Fourier Transform Infrared Spectroscopy (ATR-FTIR), contact angle measurement and permeation tests were carried out in order to evaluate the membrane performance after coating. The antifouling property of the modified membrane was evaluated for Gram-positive (Bacillus subtilis) and Gram-negative (Escherichia coli) bacteria by colony counting method. The results indicated that the modified membranes keep efficient antibacterial efficacy against both types of bacteria. The bacterial growth reduced approximately 93% and 91% on the modified membrane as compared to the unmodified membrane for E.coli and B.subtilis, respectively. Ag-TiO₂ nanoparticles imbedded nanofiltration membranes inhibit the biofilm formation and facilitate in cleaning membrane surface without using excessive chemical agents.

Influence of Multidimensional Graphene Oxide (GO) Sheets on Anti-Biofouling and Desalination Performance of Thin-Film Composite Membranes: Effects of GO Lateral Sizes and Oxidation Degree

The influence of the lateral size and the content of graphene oxide (GO) flakes in specific oxygenate functional groups on the anti-biofouling properties and performance of thin-film composite membrane (TFC) was studied. Three different multidimensional GO samples were prepared with small (500-1200 nm), medium (1200-2300 nm), and large (2300-3600 nm) size distribution, and with different degrees of oxidation (GO3 > GO2 > GO1), varying the concentration of the hydrogen peroxide amount during GO synthesis. GO1 sheets' length have a heterogeneous size distribution containing all size groups, whilst GO2 is contained in a medium-size group, and GO3 is totally contained within a small-size group. Moreover, GO oxygenate groups were controlled. GO2 and GO3 have hydroxyl and epoxy groups at the basal plane of their sheets. Meanwhile, GO1 presented only hydroxyl groups. GO sheets were incorporated into the polyamide (PA) layer of the TFC membrane during the interfacial polymerization reaction. The incorporation of GO1 produced a modified membrane with excellent bactericidal properties and anti-adhesion capacity, as well as superior desalination performance with high water flow (133% as compared with the unmodified membrane). For GO2 and GO3, despite the significant anti-biofouling effect, a detrimental impact on desalination performance was observed. The high content of large sheets in GO2 and small sheet stacking in GO3 produced an unfavorable impact on the water flow. Therefore, the synergistic effect due to the presence of large- and small-sized GO sheets and high content of OH-functional groups (GO1) made it possible to balance the performance of the membrane.

Polyurethane/Nanosilver-Doped Halloysite Nanocomposites: Thermal, Mechanical Properties, and Antibacterial Properties

In this study, the researchers successfully embellished the surface of halloysite (Ag/HNTs) with silver using halloysite, silver nitrate (AgNO₃), and polyvinylpyrrolidone (PVP). The researchers then prepared polyurethane that contained pyridine ring by using 4,4′-diphenylmethane diisocyanate (MDI) and polytetramethylene glycol (PTMG) as the hard chain segment and the soft chain segment of polyurethane (PU), as well as 2,6-pyridinedimethanol (2,6-PDM) as the chain extension agent. This was followed by the preparation of Ag/HNTs/PUs nanocomposite thin films, achieved by mixing Ag/HNTs with different ratios into polyurethane that contains pyridine ring. First, the Ag/HNTs powders were analyzed using energy-dispersive X-ray spectroscopy, X-ray diffraction, and transmission electron microscopy. Subsequently, Fourier-transform infrared spectroscopy was used to examine the dispersibility of Ag/HNTs in PU, whereas the thermal stability and the viscoelasticity of Ag/HNTs/PU were examined using thermal gravimetric analysis, differential scanning calorimetry, and dynamic mechanical analysis. When the mechanical properties of Ag/HNTs/PU were tested using a universal strength tester, the results indicated a maximum increase of 109.5% in tensile strength. The researchers then examined the surface roughness and the hydrophobic ability of the Ag/HNTs/PU thin films by using atomic force microscopy and water contact angle. Lastly, antibacterial testing on Escherichia coli revealed that when the additive of Ag/HNTs reached 2.0 wt%, 99.3% of the E. coli were eliminated. These results indicated that the addition of Ag/HNTs into PU could enhance the thermal stability, mechanical properties, and antibacterial properties of PU, implying the potential of Ag/HNTs-02 as biomedicine material.

A Review of CFD Modelling and Performance Metrics for Osmotic Membrane Processes

Simulation via Computational Fluid Dynamics (CFD) offers a convenient way for visualising hydrodynamics and mass transport in spacer-filled membrane channels, facilitating further developments in spiral wound membrane (SWM) modules for desalination processes. This paper provides a review on the use of CFD modelling for the development of novel spacers used in the SWM modules for three types of osmotic membrane processes: reverse osmosis (RO), forward osmosis (FO) and pressure retarded osmosis (PRO). Currently, the modelling of mass transfer and fouling for complex spacer geometries is still limited. Compared with RO, CFD modelling for PRO is very rare owing to the relative infancy of this osmotically driven membrane process. Despite the rising popularity of multi-scale modelling of osmotic membrane processes, CFD can only be used for predicting process performance in the absence of fouling. This paper also reviews the most common metrics used for evaluating membrane module performance at the small and large scales.

Potential Use of Silica Nanoparticles for the Microbial Stabilisation of Wine: An In Vitro Study Using Oenococcus oeni as a Model

The emerging trend towards the reduction of SO2 in winemaking has created a need to look for alternative methods to ensure the protection of wine against the growth of undesired species of microorganisms and to safely remove wine microorganisms. This study describes the possible application of silica nanospheres as a wine stabilisation agent, with Oenococcus oeni (DSM7008) as a model strain. The experiment was conducted firstly on model solutions of phosphate-buffered saline and 1% glucose. Their neutralising effect was tested under stirring with the addition of SiO2 (0.1, 0.25, and 0.5 mg/mL). Overall, the highest concentration of nanospheres under continuous stirring resulted in the greatest decrease in cell counts. Transmission electron microscope (TEM) and scanning electron microscopy (SEM) analyses showed extensive damage to the bacterial cells after stirring with silica nanomaterials. Then, the neutralising effect of 0.5 mg/mL SiO2 was tested in young red wine under stirring, where cell counts were reduced by over 50%. The obtained results suggest that silica nanospheres can serve as an alternative way to reduce or substitute the use of sulphur dioxide in the microbial stabilisation of wine. In addition, further aspects of following investigations should focus on the protection against enzymatic and chemical oxidation of wine.

Surface Grafting of Reverse Osmosis Membrane with Chlorhexidine Using Biopolymer Alginate Dialdehyde as a Facile Green Platform for In Situ Biofouling Control

We report a new robust and green facile platform for nonoxidizing chemical grafting to simultaneously improve antifouling and antibacterial properties of thin film composite (TFC) polyamide (PA) reverse osmosis (RO) membranes. In this work, alginate dialdehyde (ADA) was used as a green platform to graft chlorhexidine (CH), a nonoxidizing chemical, on TFC-RO membrane surface. A synergistic effect due to ADA and CH grafting was revealed. The modified membrane surfaces were characterized using XPS, FT-IR, AFM, SEM-EDS, contact angle, and zeta potential analysis. A simple two-step Schiff base reaction was performed. Improved salt rejection performances were observed for the grafted PA membranes at the expense of negligible flux drop for the CH-ADA-PA membranes (38 to 42 L m^-2 h^-1) compared with the pristine PA membrane (45 L m^-2 h^-1). All the CH-ADA-PA membranes had excellent antibacterial activity against E. coli along with a highly superior resistance to the formation of biofilms. Organic fouling behaviors with a protein (bovine serum albumin, BSA) and a surfactant (dodecyl trimethylammonium bromide, DTAB) were investigated as typical foulants for the grafted PA membranes. The results indicated that the CH-ADA-PA membranes showed the best antifouling performance followed by the ADA-PA membranes, the pristine membrane being the most inferior. Hence, these results pave the way for a new robust and green bioinspired route for practical application in RO membrane fouling control.

Facile Fabrication of High-Performance Thin Film Nanocomposite Desalination Membranes Imbedded with Alkyl Group-Capped Silica Nanoparticles

The advantages of thin film nanocomposite reverse osmosis (TFN-RO) membranes have been demonstrated by numerous studies within the last decade. This study proposes a facile and novel method to tune the microscale and nanoscale structures, which has good potential to fabricate high-performance TFN-RO membranes. This method involves the addition of alkyl capped silica nanoparticles (alkyl-silica NPs) into the organic phase during interfacial polymerization (IP). We discovered for the first time that the high concentration alkyl-silica NPs in organic solvent isopar-G can limit the diffusion of MPD molecules at the interface, therefore shaping the intrinsic thickness and microstructures of the PA layer. Moreover, the alkyl group modification greatly reduces the NPs agglomeration and increases the compatibility between the NPs and the PA matrix. We further demonstrate that the doping of alkyl-silica NPs impacts the performance of the TFN-RO membrane by affecting intrinsic thickness, higher surface area, hydrophobic plugging effect, and higher surface charge by a series of characterization. At brackish water desalination conditions (2000 ppm NaCl, 1.55 MPa), the optimal brackish water flux was 55.3 L/m²∙h, and the rejection was maintained at 99.6%, or even exceeded this baseline. At seawater desalination conditions (32,000 ppm NaCl, 5.5 MPa), the optimized seawater flux reached 67.7 L/m²∙h, and the rejection was sustained at 99.4%. Moreover, the boron rejection was elevated by 11%, which benefits from a hydrophobic plugging effect of the alkyl groups.

Emerging thin-film nanocomposite (TFN) membranes for reverse osmosis: A review

Thin-film composite (TFC) membranes are the heart of reverse osmosis (RO) processes for desalination and water reuse. In recent years, nanomaterials with high permeability, selectivity and chemical resistance, and low fouling tendency have begun to emerge and be applied in many other fields. This has stimulated the research on novel RO membranes consisting of nanomaterials (non-porous and porous) in their selective layers. Encouraging results have been demonstrated. Herein, the state-of-the-art developments of polyamide thin-film nanocomposite (TFN) membranes for RO processes are summarized since the concept of TFN was introduced in 2007. While it is obvious that nanomaterials could impart exclusive properties, it should also be noted that significant challenges still exist for research and commercialization of TFN membranes, such as selection of proper nanomaterials, prevention of leaching of nanoparticles, and performance and cost analysis before large-scale RO membrane manufacturing. Future research directions are outlined to offer insights for the fabrication of much advanced TFN membranes with optimal interface morphology and separation performance.

Enhanced dispersibility of metal–organic frameworks (MOFs) in the organic phase via surface modification for TFN nanofiltration membrane preparation

The nanosized UiO-66-NH₂ metal–organic framework (MOF) material was synthesized and modified by palmitoyl chloride to enhance the dispersibility and restrain the aggregation of MOF particles in the organic phase. Then the above nanomaterial was introduced into interfacial polymerization to prepare thin film nanocomposite (TFN) nanofiltration membranes. The prepared membranes displayed “ridge-valley” shaped Turing structure surface morphology with membrane thickness around 380 nm. The FE-SEM, ATR-FTIR and XPS characterization showed the polyamide layer was fabricated on the substrate surface. The TFN membranes showed higher hydrophobicity, zeta potential and roughness than TFC membranes. Due to the introduction of MOF and the formation of MOF/polyamide interfacial passageways, the TFN membranes showed higher water permeability but slightly lower rejection properties than TFC membranes. Compared with the TFN membranes prepared from pristine UiO-66 and UiO-66-NH₂, the TFN membrane prepared from modified UiO-66-NH₂ showed better rejection properties because of its superior dispersibility in the organic phase.

The nanosized UiO-66-NH₂ metal–organic framework (MOF) material was synthesized and modified by palmitoyl chloride to enhance the dispersibility and restrain the aggregation of MOF particles in the organic phase.

Zwitterion-Ag Complexes That Simultaneously Enhance Biofouling Resistance and Silver Binding Capability of Thin Film Composite Membranes

Biofouling can be overcome with zwitterion grafts and antimicrobial, metallic nanoparticles. However, the mechanism underpinning this effective approach remains unclear. To elucidate the role of each component in this system while maximizing membrane antifouling and antimicrobial properties, here we performed a comparative study to investigate the impact of zwitterion type and their interactions with Ag of various states. Two different zwitterions (SO₃^--based and COO^--based) were employed to modify polyamide (PA) thin film composite (TFC) membranes, and the metallized and mineralized membranes were developed via in situ formation of silver (Ag) nanoparticles and deposition of silver chloride (AgCl) particles on the zwitterion-modified TFC membranes. The presence of zwitterions was key to enhance Ag content, resulting in significantly improved antimicrobial and antifouling properties without compromising the nanofiltration separation performance. COO^--based zwitterions were found more favorable toward Ag metallization and mineralization compared to SO₃^--based zwitterions. The underlying mechanisms underpinning this discovery were further revealed using density functional theory (DFT) to reveal Gibbs free energy of the binding between zwitterions and Ag⁺ ions. This fundamental knowledge is crucial for designing next-generation antibiofouling strategies.