Sulfamethoxazole persistence in a river water ecosystem and its effects on the natural microbial community and Lemna minor plant

Effect of antibiotics on diverse aquatic plants in aquatic ecosystems

The widespread presence of antibiotics in aquatic ecosystems, mainly due to their use in medicine and veterinary practices, poses a significant environmental challenge. Aquatic plants play a vital role in maintaining ecosystem stability, but their responses to antibiotics vary by species, influenced by differences in their traits and interactions with environmental factors. However, the specific ways antibiotics affect these plants remain poorly understood. In this study, we conducted a meta-analysis of 167 peer-reviewed studies to investigate the mechanisms of antibiotic uptake and their effects on different types of aquatic plants-submerged, emergent, and floating. Our analysis shows that antibiotics, particularly common ones like sulfonamides, tetracyclines, and quinolones, impact aquatic plants through multiple pathways. Submerged and floating plants often face widespread, direct exposure, resulting in "full-coverage" impacts, while emergent plants experience mixed exposure patterns, affecting both submerged and aerial parts and leading to "partial-coverage" impacts. These findings provide a foundation for phytoremediation strategies, enabling the rational selection and management of aquatic plant types to mitigate antibiotic pollution. Our study underscores the ecological risks posed by antibiotic contamination in aquatic ecosystems and offers a theoretical framework for developing effective restoration strategies.

Microplastic and microfiber contamination in the Tiber River, Italy: Insights into their presence and chemical differentiation

Microplastics (MPs) are an emerging environmental concern, but studies on these contaminants, particularly in river ecosystems, remain scarce. Research has indicated that MPs in the environment are predominantly microfibers (MFs); however, a few studies suggest that the MFs encountered are chiefly of natural origin. In this study, we aimed to improve the understanding of MP/MFs (both plastic and natural), among microparticle (solid particles >10 μm to <5000 μm; mainly of plastic as well as natural origin) loads in the Tiber River, Italy, by analyzing the physicochemical properties of surface water and assessing the abundance and characteristics of MPs-MFs at three sites: Ponte Grillo, Aniene, and Magliana, along a 60 km stretch. MPs-MFs were visually inspected with a stereomicroscope and a fluorescence microscope and chemically characterized by FTIR. Interestingly, MP-MF concentrations were highest upstream at Ponte Grillo and lowest downstream at Magliana, an unconventional pattern likely related to atmospheric deposition and total suspended solids. Across sites, microparticles were mainly MFs, with MP fragments forming a minor fraction; at Ponte Grillo, Aniene, and Magliana, the MF abundances were 375.1, 58.1, and 28.8 items/L, respectively, while fragment abundances were 32.7, 14.4, and 4.8 items/L, respectively. At all sites, natural MFs (cellulose-based) were more prevalent than plastic ones (petroleum-based). The highest proportion of petroleum-based MFs, primarily PET, was observed at Magliana. Our findings indicate that although MPs-MFs in rivers stem from textile wear, laundry effluent, and WWTPs, atmospheric deposition is a dominant pathway, especially in remote, upstream, sparsely populated regions.

Mycoremediation of Sulfamethoxazole and metabolic pathway by Aspergillus tubingensis strain

Over the last few decades sulfonamides are being prescribed on a large scale for treating human beings and livestock. Contaminants of sulfonamide antibiotics are present in various environments and these residues can enter the food web, leading to health threat. The purpose of this study was to assess sulfamethoxazole degradation using a novel strain of Aspergillus sp. and demonstrates the degradation pathway of sulfamethoxazole. To the best of our knowledge, this marks the first detailed biodegradation pathway for Aspergillus sp. AJC4 proposed. The biodegradation pattern of sulfamethoxazole was assessed using High Performance Liquid Chromatography (UPLC) and validated through Gas Chromatography Mass Spectroscopy (GC-MS), Liquid Chromatography Mass Spectrometry (LC-MS) and Fourier Transform Infrared Spectroscopy (FTIR). The fungal isolate was able to degrade 99.42% of sulfamethoxazole at a concentration of 150 mg/l within 7 d. Three metabolic compounds were identified throughout the Sulfamethoxazole biodegradation process. The degradation pathway was shown to follow first order kinetics model according to the kinetics energy.

Environmental and toxicological aspects of sulfamethoxazole photodegradation in the presence of oxidizing agents

Sulfamethoxazole (SMX) is a popular active substance, which is extensively applied to treat bacterial infections in humans and animals. Due to its widespread use, SMX enters the natural environment, where it can undergo degradation. Similarly to other emerging contaminants, SMX photodegradation and the use of oxidants in wastewater treatment processes can lead to the formation of potentially adverse transformation products for ecosystems. This study investigated the efficiency of SMX photodegradation in the presence of oxidizing agents (H2O2 and Fenton reagent). The potential environmental consequences of degradation product formation were analyzed based on experimental toxicity characterization. Standardized tests employing diverse organisms were utilized: Alivibrio fischeri (Microtox®), Daphnia magna (Daphtoxkit F®), and Lemna minor (Lemna sp. GIT). The potential environmental impact of the products identified in the reaction mixtures was evaluated using parameters describing aqueous solubility, hydrophobicity, toxicity, bioconcentration, persistence, and mobility. The analysis revealed that photodegradation produces transformation products with higher toxicity than SMX, as confirmed by in vitro tests of the reaction mixtures. Most of the detected compounds were found to have low mobility potential. The formation rates of key environmentally relevant transformation products, such as 1,4-benzoquinone, aniline, and phenol, were also discussed. The changes in total organic carbon (TOC) affected by photodegradation under the influence of the considered oxidizing agents were characterized.

Synthesis of porous carbon xerogel adsorbents with tailored hierarchical porosity and morphology for the selective removal of sulfamethoxazole from water

In this work, pellet-type carbon xerogel adsorbents (CXCs) were synthesized through sol-gel polymerization of resorcinol (R) and formaldehyde (F) using Cs2CO3 (Cs) as a catalyst for the removal of sulfamethoxazole (SMX), a hazardous water pollutant. The R/Cs ratio was varied at 100, 500, 1000, and 2000 (denoted CXCs100, CXCs500, CXCs1000, and CXCs2000), resulting in CXCs with a well-defined hierarchical porous structure composed of interconnected spherical particles. Increasing the R/Cs ratio led to larger spherical particle sizes, with pore diameters ranging from 60.7 to 126.6 nm, providing accessible and low flow resistance macroporosity. The maximum adsorption capacity was achieved in the CXCs100 sample (87.8 mg/g), which decreased with increasing R/Cs ratios due to a reduction in total pore volume and meso and macropore areas, indicating that adsorption occurred in macropores and wide mesopores, driven by π-π dispersive interactions. CXCs500 emerged as the optimal adsorbent, with a favorable adsorption capacity (72.0 mg/g) and adequate rigidity (315.9 MPa) to prevent adsorbent breakdown. The adsorption capacity decreased with increasing pH due to electrostatic interactions, and increased with temperature, indicating an endothermic process.

Adsorption performance of g-C3N4/graphene, and MIL-101(Fe)/graphene for the removal of pharmaceutical contaminants: a molecular dynamics simulation study

The rising presence of drug-related contaminants in water sources is a major environmental and public health concern. Several studies have addressed the hazardous influence of these pollutants on the lives of over 400 million people worldwide. In this study, we used molecular dynamics simulations to evaluate the efficacy of two promising composite materials for the removal of pharmaceutical contaminants by using the adsorption technique. Graphitic carbon nitride/graphene (g-C3N4/graphene) and metal-organic framework (MIL-101(Fe))/graphene have been simulated for the first time for the removal of three of the most common pollutants (acetaminophen (AC), caffeine (CAF), and sulfamethoxazole (SMZ)). The nanocomposite structure has been created and optimized using the geometry optimization task in the DFTB Modules in the Amsterdam Modeling Suite. We summarized the condition of the essential parameters (Temperature, pressure, and density) of the simulation box during the MD-simulation to ensure the accuracy of our MD-simulation results. The adsorption process, van der Waals interactions, and the adsorption capacity have been calculated by using the Reactive Forcefield (ReaxFF) software. We found that the combination of MIL-101(Fe)/graphene had a higher adsorption capacity for the removal of pharmaceutical contaminants than g-C3N4/graphene. At 40 Picosecond (Ps), 80 molecules of each pharmaceutical contaminants (AC, CAF and SMZ) have been adsorbed by MIL-101(Fe)/graphene with higher exothermic energy equated to (-1174, -1630, and - 2347) MJ/mol respectively. While for g-C3N4/graphene at 40 Ps, 70 molecules of each pharmaceutical contaminants have been adsorbed with exothermic energy equated to (-924, -966, and - 1268) MJ/mol respectively. Also, our results showed that the combination of g-C₃N₄/graphene and MIL-101(Fe)/graphene both have remarkable properties that make them effective at resisting surface clogging. Finally, the results showed that the adsorption kinetics followed a pseudo-first order model, while the adsorption isotherms for AC, CAF and SMZ adhered to Freundlich model.

Insights on aggregation-algae consortium based removal of sulfamethoxazole: Unraveling removal effect, enhanced method and toxicological evaluation

The escalating occurrence of the antibiotic Sulfamethoxazole (SMX) in the environment presents a significant global threat to ecological systems and human health. Despite the growing interest in using microalgae for antibiotic biodegradation, strategies to enhance SMX elimination remain underexplored. In this study, we isolated a novel aggregation-algae consortium (AAC) from a municipal wastewater treatment plant (WWTP) and examined its potential for SMX removal, optimized culture conditions, SMX metabolite fate and the physicochemical impact on microalgal cells. The findings revealed that the AAC demonstrated remarkable resistance to SMX, even at concentrations as high as 10 mg/L, and could degrade SMX via free radical reactions. Although ion repulsion limited the biodegradation of AAC, the addition of peptone and yeast extract resulted in a significant enhancement, increased by 16.71%, 39.12% and 46.77% of three SMX groups. Moreover, AAC exhibited exceptional adaptability in real wastewater, achieving removal of 87.05%, 97.39% and 20.80% for total dissolved nitrogen, total dissolved phosphorus and SMX, respectively. The decreased degradation toxicity of SMX following AAC treatment was further validated by ECOSAR software and in vitro tests using Caenorhabditis elegans. This study advanced our understanding of SMX biodegradation and provided a novel approach for treating wastewater contaminated with SMX.

Assessing ecological responses to exposure to the antibiotic sulfamethoxazole in freshwater mesocosms

Antibiotics are a contaminant class of worldwide concern as they are frequently detected in aquatic ecosystems. To better understand the impacts of antibiotics on aquatic ecosystems, we conducted an outdoor mesocosm experiment in which aquatic communities were exposed to different concentrations of the antibiotic sulfamethoxazole (0, 0.15, 1.5, 15 and 150 μg/L). These concentrations include mean (0.15 μg/L) and maximum detected concentrations (15 and 150 μg/L) in aquatic ecosystems worldwide. Sulfamethoxazole was applied once a week for eight consecutive weeks to 1530 L outdoor mesocosms in the Netherlands, followed by an eight-week recovery period. We evaluated phytoplankton-, bacterial- and invertebrate responses during and after sulfamethoxazole exposure and assessed impacts on organic matter decomposition. Contrary to our expectations, consistent treatment-related effects on algal and bacterial communities could not be demonstrated. In addition, sulfamethoxazole did not significantly affect zooplankton and macroinvertebrate communities. However, some effects on specific taxa were observed, with an increase in Mesostoma flatworm abundance (NOEC of <0.15 μg/L). In addition, eDNA analyses indicated negative impacts on the insects Odonata at a sulfamethoxazole concentration of 15 μg/L. Overall, environmentally relevant sulfamethoxazole concentration did not result in direct or indirect impairment of entire aquatic communities and ecological processes in our mesocosms. However, several specific macroinvertebrate taxa demonstrated significant (in)direct effects from sulfamethoxazole. Comparison of the results with the literature showed inconsistent results between studies using comparable, environmentally relevant, concentrations. Therefore, our study highlights the importance of testing the ecological impacts of pharmaceuticals (such as sulfamethoxazole) across multiple trophic levels spanning multiple aquatic communities, to fully understand its potential ecological threats.

Comparative Phytotoxicity of Metallic Elements on Duckweed Lemna gibba L. Using Growth- and Chlorophyll Fluorescence Induction-Based Endpoints

In this study, we exposed a commonly used duckweed species-Lemna gibba L.-to twelve environmentally relevant metals and metalloids under laboratory conditions. The phytotoxic effects were evaluated in a multi-well-plate-based experimental setup by means of the chlorophyll fluorescence imaging method. This technique allowed the simultaneous measuring of the growth and photosynthetic parameters in the same samples. The inhibition of relative growth rates (based on frond number and area) and photochemical efficiency (Fv/Fo and Y(II)) were both calculated from the obtained chlorophyll fluorescence images. In the applied test system, growth-inhibition-based phytotoxicity endpoints proved to be more sensitive than chlorophyll-fluorescence-based ones. Frond area growth inhibition was the most responsive parameter with a median EC50 of 1.75 mg L-1, while Fv/Fo, the more responsive chlorophyll-fluorescence-based endpoint, resulted in a 5.34 mg L-1 median EC50 for the tested metals. Ag (EC50 0.005-1.27 mg L-1), Hg (EC50 0.24-4.87 mg L-1) and Cu (EC50 0.37-1.86 mg L-1) were the most toxic elements among the tested ones, while As(V) (EC50 47.15-132.18 mg L-1), Cr(III) (EC50 6.22-19.92 mg L-1), Se(VI) (EC50 1.73-10.39 mg L-1) and Zn (EC50 3.88-350.56 mg L-1) were the least toxic ones. The results highlighted that multi-well-plate-based duckweed phytotoxicity assays may reduce space, time and sample volume requirements compared to the standard duckweed growth inhibition tests. These benefits, however, come with lowered test sensitivity. Our multi-well-plate-based test setup resulted in considerably higher median EC50 (3.21 mg L-1) for frond-number-based growth inhibition than the 0.683 mg L-1 median EC50 derived from corresponding data from the literature with standardized Lemna-tests. Under strong acute phytotoxicity, frond parts with impaired photochemical functionality may become undetectable by chlorophyll fluorometers. Consequently, the plant parts that are still detectable display a virtually higher average photosynthetic performance, leading to an underestimation of phytotoxicity. Nevertheless, multi-well-plate-based duckweed phytotoxicity assays, combined with chlorophyll fluorescence imaging, offer definite advantages in the rapid screening of large sample series or multiple species/clones. As chlorophyll fluorescence images provide information both on the photochemical performance of the test plants and their morphology, a joint analysis of the two endpoint groups is recommended in multi-well-plate-based duckweed phytotoxicity assays to maximize the information gained from the tests.

Assessing the Ecotoxicity of Eight Widely Used Antibiotics on River Microbial Communities

Global prevalence of antibiotic residues (ABX) in rivers requires ecotoxicological impact assessment. River microbial communities serve as effective bioindicators for this purpose. We quantified the effects of eight commonly used ABXs on a freshwater river microbial community using Biolog EcoPlates™, enabling the assessment of growth and physiological profile changes. Microbial community characterization involved 16S rRNA gene sequencing. The river community structure was representative of aquatic ecosystems, with the prevalence of Cyanobacteria, Proteobacteria, Actinobacteria, and Bacteroidetes. Our findings reveal that all ABXs at 100 µg/mL reduced microbial community growth and metabolic capacity, particularly for polymers, carbohydrates, carboxylic, and ketonic acids. Chloramphenicol, erythromycin, and gentamicin exhibited the highest toxicity, with chloramphenicol notably impairing the metabolism of all studied metabolite groups. At lower concentrations (1 µg/mL), some ABXs slightly enhanced growth and the capacity to metabolize substrates, such as carbohydrates, carboxylic, and ketonic acids, and amines, except for amoxicillin, which decreased the metabolic capacity across all metabolites. We explored potential correlations between physicochemical parameters and drug mechanisms to understand drug bioavailability. Acute toxicity effects at the river-detected low concentrations (ng/L) are unlikely. However, they may disrupt microbial communities in aquatic ecosystems. The utilization of a wide array of genetically characterized microbial communities, as opposed to a single species, enables a better understanding of the impact of ABXs on complex river ecosystems.

Antimicrobial Transformation Products in the Aquatic Environment: Global Occurrence, Ecotoxicological Risks, and Potential of Antibiotic Resistance

The global spread of antimicrobial resistance (AMR) is concerning for the health of humans, animals, and the environment in a One Health perspective. Assessments of AMR and associated environmental hazards mostly focus on antimicrobial parent compounds, while largely overlooking their transformation products (TPs). This review lists antimicrobial TPs identified in surface water environments and examines their potential for AMR promotion, ecological risk, as well as human health and environmental hazards using in silico models. Our review also summarizes the key transformation compartments of TPs, related pathways for TPs reaching surface waters and methodologies for studying the fate of TPs. The 56 antimicrobial TPs covered by the review were prioritized via scoring and ranking of various risk and hazard parameters. Most data on occurrences to date have been reported in Europe, while little is known about antibiotic TPs in Africa, Central and South America, Asia, and Oceania. Occurrence data on antiviral TPs and other antibacterial TPs are even scarcer. We propose evaluation of structural similarity between parent compounds and TPs for TP risk assessment. We predicted a risk of AMR for 13 TPs, especially TPs of tetracyclines and macrolides. We estimated the ecotoxicological effect concentrations of TPs from the experimental effect data of the parent chemical for bacteria, algae and water fleas, scaled by potency differences predicted by quantitative structure-activity relationships (QSARs) for baseline toxicity and a scaling factor for structural similarity. Inclusion of TPs in mixtures with their parent increased the ecological risk quotient over the threshold of one for 7 of the 24 antimicrobials included in this analysis, while only one parent had a risk quotient above one. Thirteen TPs, from which 6 were macrolide TPs, posed a risk to at least one of the three tested species. There were 12/21 TPs identified that are likely to exhibit a similar or higher level of mutagenicity/carcinogenicity, respectively, than their parent compound, with tetracycline TPs often showing increased mutagenicity. Most TPs with increased carcinogenicity belonged to sulfonamides. Most of the TPs were predicted to be mobile but not bioaccumulative, and 14 were predicted to be persistent. The six highest-priority TPs originated from the tetracycline antibiotic family and antivirals. This review, and in particular our ranking of antimicrobial TPs of concern, can support authorities in planning related intervention strategies and source mitigation of antimicrobials toward a sustainable future.

Spatio-temporal variation of the microbiome and resistome repertoire along an anthropogenically dynamic segment of the Ganges River, India

Aquatic ecosystems are regarded as a hub of antibiotic and metal resistance genes. River Ganges is a unique riverine system in India with socio-cultural and economic significance. However, it remains underexplored for its microbiome and associated resistomes along its anthropogenically impacted course. The present study utilized a nanopore sequencing approach to depict the microbial community structure in the sediments of the river Ganges harboring antibiotic and metal resistance genes (A/MRGs) in lower stretches known for anthropogenic impact. Comprehensive microbiome analyses revealed resistance genes against 23 different types of metals and 28 classes of antibiotics. The most dominant ARG category was multidrug resistance, while the most prevalent MRGs conferred resistance against copper and zinc. Seasonal differences dismally affected the microbiota of the Ganges. However, resistance genes for fosmidomycin and tetracycline varied with season ANOVA, p < 0.05. Interestingly, 333 and 334 ARG subtypes were observed at all the locations in pre-monsoon and post-monsoon, respectively. The taxa associated with the dominant ARGs and MRGs were Pseudomonas and Burkholderia, which are important nosocomial pathogens. A substantial phage diversity for pathogenic and putrefying bacteria at all locations attracts attention for its use to tackle the dissemination of antibiotic and metal-resistant bacteria. This study suggests the accumulation of antibiotics and metals as the driving force for the emergence of resistance genes and the affiliated bacteria trafficking them. The present metagenomic assessment highlights the need for comprehensive, long-term biological and physicochemical monitoring and mitigation strategies toward the contaminants associated with ARGs and MRGs in this nationally important river.

A step forward on site-specific environmental risk assessment and insight into the main influencing factors of CECs removal from wastewater

The presence of Contaminants of Emerging Concern (CECs) in water systems has been recognized as a potential source of risk for human health and the ecosystem. The present paper aims at evaluating the effects of different characteristics of full-scale Wastewater Treatment Plants (WWTPs) on the removal of 14 selected CECs belonging to the classes of caffeine, illicit drugs and pharmaceuticals. Particularly, the investigated plants differed because of the treatment lay-out, the type of biological process, the value of the operating parameters, the fate of the treated effluent (i.e. release into surface water or reuse), and the treatment capacity. The activity consisted of measuring concentrations of the selected CECs and also traditional water quality parameters (i.e. COD, phosphorous, nitrogen species and TSS) in the influent and effluent of 8 plants. The study highlights that biodegradable CECs (cocaine, methamphetamine, amphetamine, benzoylecgonine, 11-nor-9carboxy-Δ9-THC, lincomycin, trimethoprim, sulfamethoxazole, sulfadiazine, sulfadimethoxine, carbamazepine, ketoprofen, warfarin and caffeine) were well removed by all the WWTPs, with the best performance achieved by the MBR for antibiotics. Carbamazepine was removed at the lowest extent by all the WWTPs. The environmental risk assessed by using the site-specific value of the dilution factor resulted to be high in 3 out of 8 WWTPs for carbamazepine and less frequently for caffeine. However, the risk was reduced when the dilution factor was assumed equal to the default value of 10 as proposed by EU guidelines. Therefore, a specific determination of this factor is needed taking into account the hydraulic characteristics of the receiving water body.

Antibiotic resistance genes in Chishui River, a tributary of the Yangtze River, China: Occurrence, seasonal variation and its relationships with antibiotics, heavy metals and microbial communities

The large-scale use and release of antibiotics may create selective pressure on antibiotic resistance genes (ARGs), causing potential harm to human health. River ecosystems have long been considered repositories of antibiotics and ARGs. Therefore, the distribution characteristics and seasonal variation in antibiotics and ARGs in the surface water of the main stream and tributaries of the Chishui River were studied. The concentrations of antibiotics in the dry season and rainy season were 54.18-425.74 ng/L and 66.57-256.40 ng/L, respectively, gradually decreasing along the river direction. The results of antibiotics in the dry season and rainy season showed that livestock and poultry breeding were the main sources in the surface water of the Chishui River basin. Risk assessments indicated high risk levels of OFL in both seasons. In addition, analysis of ARGs and microbial community diversity showed that sul1 and sul3 were the main ARGs in the two seasons. The highest abundance of ARGs was 7.70 × 10⁷ copies/L, and intl1 was significantly positively correlated with all resistance genes (p< 0.01), indicating that it can significantly promote the transmission of ARGs. Proteobacteria were the dominant microorganisms in surface water, with a higher average abundance in the dry season (60.64 %) than in the rainy season (39.53 %). Finally, correlation analyses were performed between ARGs and antibiotics, microbial communities and heavy metals. The results showed that there was a significant positive correlation between ARGs and most microorganisms and heavy metals (p< 0.01), indicating that occurrence and transmission in the environment are influenced by various environmental factors and cross-selection. In conclusion, the persistent residue and transmission of ARGs and their transfer to pathogens are a great threat to human health and deserve further study and attention.

Application of duckweed (Lemna sp.) and water fern (Azolla sp.) in the removal of pharmaceutical residues in water: State of art focus on antibiotics

In recent decades, antibiotic residues in the environment have increased, affecting components of biological communities, from bacteria to plants and animals. Different methods have been used to remove these compounds, including phytoremediation with floating aquatic species such as duckweed and aquatic fern, with positive results. This study analyses information about the removal efficiency of drugs, with a focus on antibiotics, using Lemna and Azolla, which will allow a better understanding of phytoremediation processes from the perspective of plant physiology. The physiological processes of macrophytes in an environment with this type of pollutant and the phytotoxic effects on plants at high concentrations are also analysed. The metabolization of toxic compounds occurs in three phases: phase I begins with the absorption of antibiotics and the secretion of reactive oxygen species (ROS); in phase II, the effects of ROS are neutralized and minimized by conjugation with enzymes such as glutathione transferase or metabolites such as glutathione; and phase III culminates with the storage of the assimilated compounds in the vacuoles, apoplast and cell wall. In this way, plants contribute to the removal of toxic compounds. In summary, there is sufficient scientific evidence on the efficiency of the elimination of pharmaceutical compounds by these floating macrophytes at the laboratory scale, which indicates that their application under real conditions can have good results.

Sodium alginate/magnetic hydrogel microspheres from sugarcane bagasse for removal of sulfamethoxazole from sewage water: Batch and column modeling

Magnetic carbon were synthesized from sugarcane bagasse using hydrothermal carbonization followed by thermal activation was converted to solid state as beads (hydrogels SACFe) using sodium alginate and applied as adsorbent in removal sulfamethoxazole in batch and column mode. From adsorption parameter analysis it was confirmed that 0.6 g L^-1 SACFe was effective in removing 50 mg L^-1 of SMX at pH 6.2. Sorption of SMX on SACFe beads followed Elovich kinetics and Freundlich isotherm. It was further confirmed that sorption occurred on heterogeneous surface of SACFe beads with chemisorption as rate limiting step. Maximum adsorption capacity was obtained as 58.439 mg g^-1 pH studies revealed that charged assisted hydrogen bonding, EDA interactions are some of the mechanism that favoured removal of SMX. From column studies it was found that bead height of 2 cm and flow rate of 1.5 mL min^-1 found to be best in removing pollutant. Thomas model fitted better the experimental data stating that improved interaction between adsorbent and adsorbate act as major driving force tool in obtaining maximum sorption capacity. Breakthrough curve was completely affected by varied flow rate and bed height. Column adsorption was effective in reducing COD and BOD levels of sewage which are affected by toxic pollutants and miscellaneous compounds. Feasibility analysis showed that SACFe beads could be employed for real-time applications as it is cost, energy effective and easy recovery.

Enhanced removal efficiency of sulfamethoxazole by acclimated microalgae: Tolerant mechanism, and transformation products and pathways

This study utilized sulfamethoxazole (SMX) acclimatization to enhance the tolerance and biodegradation capacity of Chlorella vulgaris. Compared to wild C. vulgaris, the growth inhibition and oxidative damage induced by SMX evidently decreased in acclimated C. vulgaris, and meanwhile photosynthetic and antioxidant activities were significantly promoted. The physiological analyses with the aid of principal component analysis revealed the increase of catalase and glutathione reductase activities was the critical tolerant mechanism of acclimated C. vulgaris. As the consequence, the acclimated C. vulgaris exhibited enhanced efficiency and (pseudo-first-order) kinetic rate for removal of SMX. The distribution analysis of residual SMX demonstrated the biodegradation was the major removal mechanism of SMX by C. vulgaris, while bioadsorption and bioaccumulation made pimping contributions. During the degradation process of SMX, nine transformation products (TPs) were identified. Based on the identified TPs, a possible transformation pathway was proposed.

Antimicrobial Resistance in Rivers: A Review of the Genes Detected and New Challenges

River ecosystems are very important parts of the water cycle and an excellent habitat, food, and drinking water source for many organisms, including humans. Antibiotics are emerging contaminants which can enter rivers from various sources. Several antibiotics and their related antibiotic resistance genes (ARGs) have been detected in these ecosystems by various research programs and could constitute a substantial problem. The presence of antibiotics and other resistance cofactors can boost the development of ARGs in the chromosomes or mobile genetic elements of natural bacteria in rivers. The ARGs in environmental bacteria can also be transferred to clinically important pathogens. However, antibiotics and their resistance genes are both not currently monitored by national or international authorities responsible for controlling the quality of water bodies. For example, they are not included in the contaminant list in the European Water Framework Directive or in the US list of Water-Quality Benchmarks for Contaminants. Although ARGs are naturally present in the environment, very few studies have focused on non-impacted rivers to assess the background ARG levels in rivers, which could provide some useful indications for future environmental regulation and legislation. The present study reviews the antibiotics and associated ARGs most commonly measured and detected in rivers, including the primary analysis tools used for their assessment. In addition, other factors that could enhance antibiotic resistance, such as the effects of chemical mixtures, the effects of climate change, and the potential effects of the coronavirus disease 2019 pandemic, are discussed. Environ Toxicol Chem 2022;41:687-714. © 2022 SETAC.

Environmental heterogeneity determines the response patterns of microbially mediated N-reduction processes to sulfamethoxazole in river sediments

The widespread occurrence of antibiotics in aquatic ecosystems leads to potential ecological risks to organisms, in turn affecting microbially mediated processes. Here, we investigated the response of dominant N-reduction processes to the frequently detected antibiotic sulfamethoxazole (SMX) along the Chaobai River with regional environmental heterogeneity, including denitrification, anaerobic ammonium oxidation (anammox), dissimilatory nitrate reduction to ammonium (DNRA), and nitrous oxide (N₂O) release. We found two divergent SMX response patterns for denitrification in contrasting scenarios of geochemical properties. In the context of low nitrate and carbon, SMX weakened denitrification with a slightly stimulation first. Whereas SMX directly inhibited denitrification when nitrate and carbon were sufficient. High SMX concentration suppressed anammox (26-72%) and DNRA activities (48-84%) via restraining the activities of anammox and DNRA bacteria. Notably, SMX increased the contribution of denitrification to N-reduction at the expense of DNRA to N-reduction, leading to a shift in nitrogen conversion towards denitrification. Additionally, SMX stimulated N₂O emission (up to 91%) due to superior restraint on process of N₂O reduction to N₂ and an incline for N-reduction towards denitrification, thereby exacerbating greenhouse effect. Our results advance the understanding of how nitrogen cycling is affected by SMX in aquatic ecosystems with environmental heterogeneity.

Chlorophyll Fluorescence Imaging-Based Duckweed Phenotyping to Assess Acute Phytotoxic Effects

Duckweeds (Lemnaceae species) are extensively used models in ecotoxicology, and chlorophyll fluorescence imaging offers a sensitive and high throughput platform for phytotoxicity assays with these tiny plants. However, the vast number of potentially applicable chlorophyll fluorescence-based test endpoints makes comparison and generalization of results hard among different studies. The present study aimed to jointly measure and compare the sensitivity of various chlorophyll fluorescence parameters in Spirodela polyrhiza (giant duckweed) plants exposed to nickel, chromate (hexavalent chromium) and sodium chloride for 72 h, respectively. The photochemistry of Photosystem II in both dark- and light-adapted states of plants was assessed via in vivo chlorophyll fluorescence imaging method. Our results indicated that the studied parameters responded with very divergent sensitivity, highlighting the importance of parallelly assessing several chlorophyll fluorescence parameters. Generally, the light-adapted parameters were more sensitive than the dark-adapted ones. Thus, the former ones might be the preferred endpoints in phytotoxicity assays. Fv/Fm, i.e., the most extensively reported parameter literature-wise, proved to be the least sensitive endpoint; therefore, future studies might also consider reporting Fv/Fo, as its more responsive analogue. The tested toxicants induced different trends in the basic chlorophyll fluorescence parameters and, at least partly, in relative proportions of different quenching processes, suggesting that a basic distinction of water pollutants with different modes of action might be achievable by this method. We found definite hormetic patterns in responses to several endpoints. Hormesis occurred in the concentration ranges where the applied toxicants resulted in strong growth inhibition in longer-term exposures of the same duckweed clone in previous studies. These findings indicate that changes in the photochemical efficiency of plants do not necessarily go hand in hand with growth responses, and care should be taken when one exclusively interprets chlorophyll fluorescence-based endpoints as general proxies for phytotoxic effects.

Application of UHPLC-MS/MS method to study occurrence and fate of sulfonamide antibiotics and their transformation products in surface water in highly urbanized areas

Sulfonamide antibiotics (SAs) are used on a large scale in human and veterinary medicine. The main goal of this study was to develop a method for the detection of selected SAs (sulfamethoxazole, sulfadiazine, sulfamethazine, sulfathiazole, sulfapyridine, sulfamerazine, sulfamethiazole, and sulfisoxazole) in aqueous samples (targeted analysis), and then conduct a non-targeted analysis to determine the transformation products to elucidate their degradation pathways. These analyses were performed using ultra-high-performance liquid chromatography coupled to tandem mass spectrometry. The procedure was used to detect selected antibiotics in water samples collected throughout a highly urbanized area. Among the studied compounds, sulfamethoxazole (max. 78.88 ng L^-1) and sulfapyridine (max. 38.88 ng L ^-1) were the most common pollutants identified in surface waters. Trace amounts of sulfadiazine (below LOQ = 0.40 ng L^-1) were also detected. Next, the samples were screened to detect the transformation products. Several sulfadiazine and sulfamethoxazole transformation products were detected and confirmed in the environmental samples.

Impact of sulfamethoxazole on a riverine microbiome

The continued emergence of bacterial pathogens presenting antimicrobial resistance is widely recognised as a global health threat and recent attention focused on potential environmental reservoirs of antibiotic resistance genes (ARGs). Freshwater environments such as rivers represent a potential hotspot for ARGs and antibiotic resistant bacteria as they are receiving systems for effluent discharges from wastewater treatment plants (WWTPs). Effluent also contains low levels of different antimicrobials including antibiotics and biocides. Sulfonamides are antibacterial chemicals widely used in clinical, veterinary and agricultural settings and are frequently detected in sewage sludge and manure in addition to riverine ecosystems. The impact of such exposure on ARG prevalence and diversity is unknown, so the aim of this study was to investigate the release of a sub-lethal concentration of the sulfonamide compound sulfamethoxazole (SMX) on the river bacterial microbiome using a flume system. This system was a semi-natural in vitro flume using river water (30 L) and sediment (6 kg) with circulation to mimic river flow. A combination of 'omics' approaches were conducted to study the impact of SMX exposure on the microbiomes within the flumes. Metagenomic analysis showed that the addition of low concentrations of SMX (<4 μg L^-1) had a limited effect on the bacterial resistome in the water fraction only, with no impact observed in the sediment. Metaproteomics did not show differences in ARGs expression with SMX exposure in water. Overall, the river bacterial community was resilient to short term exposure to sub-lethal concentrations of SMX which mimics the exposure such communities experience downstream of WWTPs throughout the year.

Nanoadsorbents in focus for the remediation of environmentally-related contaminants with rising toxicity concerns

Modern lifestyle demands high-end commodities, for instance, cosmetics, detergents, shampoos, household cleaning, sanitary items, medicines, and so forth. In recent years, these products' consumption has increased considerably, being antibiotics and some other pharmaceutical and personal care products (PPCPs). Several antibiotics and PPCPs represent a wide range of emerging contaminants with a straight ingress into aquatic systems, given their high persistence in seawater, effluent treatment plants, and even drinking water. Under these considerations, the necessity of developing new and affordable technologies for the treatment and sustainable mitigation of pollutants is highly requisite for a safer and cleaner environment. One possible mitigation solution is an effective deployment of nanotechnological cues as promising matrices that can contribute by attending issues and improving the current strategies to detect, prevent, and mitigate hazardous pollutants in water. Focused on nanoparticles' distinctive physical and chemical properties, such as high surface area, small size, and shape, metallic nanoparticles (MNPs) have been investigated for water remediation. MNPs gained increasing interest among research groups due to their superior efficiency, stability, and high catalyst activity compared with conventional systems. This review summarizes the occurrence of antibiotics and PPCPs and the application of MNPs as pollutant mitigators in the aquatic environment. The work also focuses on transportation fate, toxicity, and current regulations for environmental safety.

Sulfamethoxazole-Altered Transcriptomein Green Alga Raphidocelis subcapitata Suggests Inhibition of Translation and DNA Damage Repair

Occurrence of sulfonamide antibiotics has been reported in surface waters with the exposures ranging from < 1 ng L^–1 to approximately 11 μg L^–1, which may exert adverse effects on non-target algal species, inhibiting algal growth and further hindering the delivery of several ecosystem services. Yet the molecular mechanisms of sulfonamide in algae remain undetermined. The aims of the present work are: (1) to test the hypothesis whether sulfamethoxazole (SMX) inhibits the folate biosynthesis in a model green alga Raphidocelis subcapitata; and (2) to explore the effects of SMX at an environmentally relevant concentration on algal health. Here, transcriptomic analysis was applied to investigate the changes at the molecular levels in R. subcapitata treated with SMX at the concentrations of 5 and 300 μg L^–1. After 7-day exposure, the algal density in the 5 μg L^–1 group was not different from that in the controls, whereas a marked reduction of 63% in the high SMX group was identified. Using the adj p < 0.05 and absolute log₂ fold change > 1 as a cutoff, we identified 1 (0 up- and 1 downregulated) and 1,103 (696 up- and 407 downregulated) differentially expressed genes (DEGs) in the 5 and 300 μg L^–1 treatment groups, respectively. This result suggested that SMX at an environmentally relevant exposure may not damage algal health. In the 300 μg L^–1 group, DEGs were primarily enriched in the DNA replication and repair, photosynthesis, and translation pathways. Particularly, the downregulation of base and nucleotide excision repair pathways suggested that SMX may be genotoxic and cause DNA damage in alga. However, the folate biosynthesis pathway was not enriched, suggesting that SMX does not necessarily inhibit the algal growth via its mode of action in bacteria. Taken together, this study revealed the molecular mechanism of action of SMX in algal growth inhibition.

Effects of Sulfamethoxazole on Growth and Antibiotic Resistance of A Natural Microbial Community

Diffuse environmental antibiotic and antibiotic resistance gene contamination is increasing human and animal exposure to these emerging compounds with a consequent risk of reduction in antibiotic effectiveness. The present work investigated the effect of the antibiotic sulfamethoxazole (SMX) on growth and antibiotic resistance genes of a microbial community collected from an anaerobic digestion plant fed with cattle manure. Digestate samples were used as inoculum for concentration-dependent experiments using SMX at various concentrations. The antibiotic concentrations affecting the mixed microbial community in terms of growth and spread of resistant genes (sul1, sul2) were investigated through OD (Optical Density) measures and qPCR assays. Moreover, SMX biodegradation was assessed by LC-MS/MS analysis. The overall results showed that SMX concentrations in the range of those found in the environment did not affect the microbial community growth and did not select for antibiotic-resistant gene (ARG) maintenance or spread. Furthermore, the microorganisms tested were able to degrade SMX in only 24 h. This study confirms the complexity of antibiotic resistance spread in real matrices where different microorganisms coexist and suggests that antibiotic biodegradation needs to be included for fully understanding the resistance phenomena among bacteria.

Antimicrobial resistance screening and profiles: a glimpse from the South African perspective

According to the Centre for Disease Dynamics Economics and Policy, South Africa represents a paradox of antibiotic management similar to other developing countries, with both overuse and underuse (resulting from lack of access) of antibiotics. In addition, wastewater reuse may contribute towards antibiotic resistance through selective pressure that increases resistance in native bacteria and on clinically relevant bacteria, increasing resistance profiles of the common pathogens. Sediments of surface water bodies and wastewater sludge provide a place where antibiotic resistance genes are transferred to other bacteria. Crop irrigation is thought to be a potential source of exposure to antibiotic-resistant bacteria through the transfer from the water or sludge into crops. The objectives of this study were to examine the antibiotic-resistance profiles of Escherishia coli from three agricultural locations in the Western Cape, South Africa. Using a classical microbiology culture approach, the resistance profiles of E. coli species isolated from river water and sediments, farm dams and their sediments and a passive algal wastewater treatment ponds and sediment used for crop irrigation were assessed for resistance to 13 commonly used antibiotics. Randomly selected E. coli isolates from the sediment and water were tested for resistance. 100% of E. coli isolates were resistant to sulphamethoxazole, highlighting its relevance in the South African context. In river water and farm dam samples, only the E. coli isolated from sediment were found to be resistant to fluoroquinolone or fluorifenicol. In the wastewater treatment ponds, the resistance profiles of E. coli isolated from sediments differed from those isolated from effluent, with 90% of the effluent isolates being resistant to ampicillin. Isolates from the sediment were less resistant (40%) to ampicillin, whereas all the isolates from the pond water and sediment samples were resistant to sulphamethoxazole. These results illustrate the importance of developing a better understanding of antibiotic resistance in agriculture and wastewater scenarios to ensure remedial measures take place where the greatest benefit can be realised especially in countries with limited financial and infrastructural resources. Moreover, the potential for passive algal treatment as an effective, feasible alternative for wastewater treatment is highlighted, with comparable resistance profiles and a reducing overall resistance in the sediment samples.

Influence of Sulfonamide Contamination Derived from Veterinary Antibiotics on Plant Growth and Development

Veterinary antibiotics such as sulfonamides are widely used to increase feed efficiency and to protect against disease in livestock production. The sulfonamide antimicrobial mechanism involves the blocking of folate biosynthesis by inhibiting bacterial dihydropteroate synthase (DHPS) activity competitively. Interestingly, most treatment antibiotics can be released into the environment via manure and result in significant diffuse pollution in the environment. However, the physiological effects of sulfonamide during plant growth and development remain elusive because the plant response is dependent on folate biosynthesis and the concentration of antibiotics. Here, we present a chemical interaction docking model between Napa cabbage (Brassica campestris) DHPS and sulfamethoxazole and sulfamethazine, which are the most abundant sulfonamides detected in the environment. Furthermore, seedling growth inhibition was observed in lentil bean (Lens culinaris), rice (Oryza sativa), and Napa cabbage plants upon sulfonamide exposure. The results revealed that sulfonamide antibiotics target plant DHPS in a module similar to bacterial DHPS and affect early growth and the development of crop seedlings. Taking these results together, we suggest that sulfonamides act as pollutants in crop fields.