Scale-up synthesis of zero-valent iron nanoparticles and their applications for synergistic degradation of pollutants with sodium borohydride

Iron nanoparticles prepared from South African acid mine drainage for the treatment of methylene blue in wastewater

In this study, three acid mine drainage (AMD) sources were investigated as potential sources of iron for the synthesis of iron nanoparticles using green tea extract (an environmentally friendly reductant) or sodium borohydride (a chemical reductant). Electrical conductivity (EC), total dissolved solids (TDS), dissolved oxygen (DO), oxidation-reduction potential (ORP), ion chromatography (IC), and inductively coupled plasma-mass spectroscopy (ICP-MS) techniques were used to characterize the AMD, and the most suitable AMD sample was selected based on availability. Additionally, three tea extracts were characterized using ferric-reducing antioxidant power (FRAP) and 2,2-diphenyl-1-picryl-hydrazine-hydrate (DPPH), and the most suitable environmentally friendly reductant was selected based on the highest FRAP (1152 µmol FeII/g) and DPPH (71%) values. The synthesized iron nanoparticles were characterized and compared using XRD, STEM, Image J, EDS, and FTIR analytical techniques. The study shows that the novel iron nanoparticles produced using the selected green tea (57 nm) and AMD were stable under air due to the surface modification by polyphenols contained in green tea extract, whereas the nanoparticles produced using sodium borohydride (67 nm) were unstable under air and produced a toxic supernatant. Both the AMD-based iron nanoparticles can be used as Fenton-like catalysts for the decoloration of methylene blue solution. While 99% decoloration was achieved by the borohydride-synthesized nanoparticles, 81% decoloration was achieved using green tea-synthesized nanoparticles.

Optimization of methyl orange decolorization by bismuth(0)-doped hydroxyapatite/reduced graphene oxide composite using RSM-CCD

In the current study, the catalyst for the decolorization of methyl orange (MO) was developed HAp-rGO by the aqueous precipitation approach. Then, bismuth(0) nanoparticles (Bi NPs), which expect to show high activity, were reduced on the surface of the support material (HAp-rGO). The obtained catalyst was characterized by scanning electron microscopy (SEM), energy-dispersive X-ray analysis (EDX), X-ray diffraction (XRD), and X-ray photoelectron spectroscopy (XPS) techniques. The parameters that remarkably affect the decolorization process (such as time, initial dye concentration, NaBH4 amount, and catalyst amount) have been examined by response surface methodology (RSM), an optimization method that has acquired increasing significance in recent years. In the decolorization of MO, the optimum conditions were identified as 2.91 min, Co: 18.85 mg/L, NaBH4 amount: 18.35 mM, and Bi/HAp-rGO dosage: 2.12 mg/mL with MO decolorization efficiency of 99.60%. The decolorization process of MO with Bi/HAp-rGO was examined in detail kinetically and thermodynamically. Additionally, the possible decolorization mechanism was clarified. The present work provides a new insight into the use of the optimization process for both the effective usage of Bi/HAp-rGO and the catalytic reduction of dyes.

Tailoring Fe0 Nanoparticles via Lattice Engineering for Environmental Remediation

Lattice engineering of nanomaterials holds promise in simultaneously regulating their geometric and electronic effects to promote their performance. However, local microenvironment engineering of Fe0 nanoparticles (nFe0) for efficient and selective environmental remediation is still in its infancy and lacks deep understanding. Here, we present the design principles and characterization techniques of lattice-doped nFe0 from the point of view of microenvironment chemistry at both atomic and elemental levels, revealing their crystalline structure, electronic effects, and physicochemical properties. We summarize the current knowledge about the impacts of doping nonmetal p-block elements, transition-metal d-block elements, and hybrid elements into nFe0 crystals on their local coordination environment, which largely determines their structure-property-activity relationships. The materials' reactivity-selectivity trade-off can be altered via facile and feasible approaches, e.g., controlling doping elements' amounts, types, and speciation. We also discuss the remaining challenges and future outlooks of using lattice-doped nFe0 materials in real applications. This perspective provides an intuitive interpretation for the rational design of lattice-doped nFe0, which is conducive to real practice for efficient and selective environmental remediation.

Nano-Scale Zero Valent Iron (nZVI) Priming Enhances Yield, Alters Mineral Distribution and Grain Nutrient Content of Oryza sativa L. cv. Gobindobhog: A Field Study

In recent decades, nano-scale zero valent iron is reported to have plant growth enhancement capacity under laboratory conditions, but till date, there is no report to highlight its effect on the growth and yield of field-grown plants. In this study, we have evaluated the potential of nZVI priming on rice yield. A two-year field study has been conducted with different concentrations (10, 20, 40, and 80 mg l^-1) of nZVI for seed priming. The efficacy of nanopriming was compared with the hydroprimed control set. Seeds were treated for 72 h and sown in nursery beds and after 30 days seedlings were transplanted in the field. Root anatomy and morphology were studied in 7 days old seedlings where no changes were found. RAPD analysis also confirmed that low doses of nZVI were not genotoxic. Nanoprimed plants also had broader leaves, higher growth, biomass, and tiller number than control plants. Maximum yield was obtained from the 20 mg l^-1 nZVI primed set (3.8 fold higher than untreated control) which is achieved primarily because of the increase in fertile tiller numbers (two fold higher than untreated control). Higher values of other agronomic parameters like growth rate, net assimilation rate proved that nZVI priming enhanced photosynthetic efficiency and helped in the proper storage of photo-assimilates. All these attributed to increased accumulation of phytochemicals like starch, soluble sugar, protein, lipid, phenol, riboflavin, thiamine, and ascorbic acid in the grains. The elemental analysis confirmed that nZVI priming also promoted higher accumulations of macro and micronutrients in grains. Thus, nanoprimed seeds showed better crop performance compared to the traditional hydropimed seeds. Hence, nZVI can be considered as 'pro-fertilizer' and can be used commercially as a seed treatment agent which is capable of boosting plant growth and yield along with minimum interference to the soil ecosystem.

SUPPLEMENTARY INFORMATION

The online version contains supplementary material available at 10.1007/s00344-021-10335-0.

Adsorption and detoxification of pharmaceutical compounds from wastewater using nanomaterials: A review on mechanism, kinetics, valorization and circular economy

Antibiotics overuse, inappropriate conduct, and discharge have led to adverse effects on various ecosystems. The occurrence of antibiotics in surface and drinking water is a matter of global concern. It is responsible for multiple disorders, including disruption of endocrine hormones and high chronic toxicity. The hospitals, pharmaceutical industries, households, cattle farms, and aquaculture are the primary discharging sources of antibiotics into the environment. This review provides complete detail on applying different nanomaterials or nanoparticles for the efficient removal of antibiotics from the diverse ecosystem with a broader perspective. Efforts have been made to focus on the degradation pathways and mechanism of antibiotic degradation using nanomaterials. More light has been shed on applying nanostructures in photocatalysis, which would be an economical and efficient solution. The nanoscale material or nanoparticles have incredible potential for mineralizing pharmaceutical compounds in aqueous solutions at low cost, easy handling characteristics, and high efficacy. Furthermore, nanoparticles can absorb the pharmaceutical by-products and wastes at a minimum cost as they can be easily recycled. With the increasing number of research in this direction, the valorization of pharmaceutical wastes and by-products will continue to expand as we progress from old conventional approaches towards nanotechnology. The utilization of nanomaterials in pharmaceutical wastewater remediation is discussed with a major focus on valorization, energy generation, and minimization and its role in the circular economy creating sustainable development.

Interactions between natural organic matter fractions and nanoscale zero-valent iron

The presence of natural organic matter (NOM) in groundwater could play an important role in the removal of contaminants by nanoscale zero-valent iron (NZVI). NOM has a heterogeneous structure and can be divided into 6 fractions based on polarity and charges: hydrophobic acid (HPOA), hydrophobic base (HPOB), hydrophobic neutral (HPON), hydrophilic acid (HPIA), hydrophilic base (HPIB), and hydrophilic neutral (HPIN). The objective of this study was to evaluate the interactions between NOM fractions and NZVI using two approaches: 1) the interaction between NOM fraction isolates and NZVI and 2) bulk NOM fractionation before and after reaction with NZVI. Two sources of NOM-groundwater (GWNOM), Khon Kaen, Thailand and Suwannee River NOM (SRNOM), USA-were examined. The isolated NOM had more interactions with NZVI at pH 5 compared to pH 7 and 9 for both GWNOM and SRNOM. HPOA of GWNOM had the highest adsorption capacity (q_e) of 6.95 mg/g (pH 5), and that was also the case for HPIA of SRNOM (18.66 mg/g, pH 5). HPIN of both GWNOM and SRNOM yielded the lowest q_e among the six fractions. The adsorption capacities of NOM fractions were well correlated with specific ultraviolet absorbance. Fluorescence excitation-emission spectra revealed that protein-like components preferentially reacted with NZVI. The results of bulk NOM fractionation after reacting with NZVI indicated that NOM not only adsorbed on NZVI but also reacted with NZVI and transformed to become more hydrophilic and neutral. This study's findings suggest that different NOM fractions had varying interactions with NZVI. The acid fractions tended to interact more than the other fractions. This work provides a deeper understanding of the reactivity between NOM and NZVI.

Elucidating ROS signaling networks and physiological changes involved in nanoscale zero valent iron primed rice seed germination sensu stricto

Reactive oxygen species (ROS) play pivotal roles during seed dormancy and germination. Metabolically active cells of seeds generate ROS and successful germination is governed by internal ROS contents, maintained within an optimum "oxidative window" by several ROS scavengers. Although ROS was previously considered hazardous, optimum ROS generation in seeds can mediate early seed germination by acting as messengers for cell signaling involved in endosperm weakening, stored food mobilization, etc. Recent reports suggest that nanopriming can expedite seed germination rates and enhance seed quality and crop performances. However, nanoparticle-driven signal cascades involved during seed germination are still unknown. The present study is aimed to explore molecular mechanisms for promoting germination in nanoprimed seeds and to investigate the plausible role of nanoparticle-mediated ROS generation in this process. Here rice seeds were primed with 20 mg L ^-1nanoscale zero valent iron (nZVI) for 72 h and several biochemical and physiological changes were monitored at different time points (5, 10, 20, 40, 60, and 80 h). To gain insight into roles of ROS in germination rate enhancement, intercellular ROS inhibitor, diphenyleneiodonium (DPI) was taken as another priming agent. Seed priming with DPI impaired seed germination percentage, hydrolytic enzyme activities due to ROS imbalance. On the contrary, seeds primed with both DPI and nZVI could recover from deleterious consequences of DPI treatment. Although DPI impaired intercellular ROS generation, nZVI can generate ROS independently which was confirmed from ROS localization assay. In both nZVI and the DPI and nZVI co-primed sets, significant up-regulation in genes like OsGA3Ox2, OsGAMYB were observed which are responsible for regulating the activity of several hydrolases and mediates efficient mobilization of storage food reserves of seeds. Thus, nZVI priming has potential to regulate intracellular ROS levels and orchestrate all the metabolic activities which eventually up-regulates seed germination rate and seed vigour.

Differential growth and metabolic responses induced by nano-scale zero valent iron in germinating seeds and seedlings of Oryza sativa L. cv. Swarna

Since development of antioxidant defence system is high energy demanding event, innate defence system and stress tolerance of plant is strictly governed by plant age. This study is aimed towards evaluating variation of tolerance in germinating seeds and seedlings of Oryza sativa L. cv. Swarna against nano-scale zero valent iron (nZVI). A comparative study of several physiological and biochemical parameters have been carried out among 2 distinct plant groups, Group I treated with variable concentrations of nZVI (50, 100, 150 and 200 mg L^-1) during germination and Group II treated with similar nZVI doses on 7th day after germination. Upon treatment with higher nZVI concentrations, Group I seedlings showed susceptibility towards oxidative stress while Group II seedlings showed tolerance against these higher doses of nZVI. Significant growth enhancement was observed upon treatment with 50-150 mg L^-1 nZVI, since up-regulation of plant's endogenous antioxidant system protected relatively aged Group II seedlings from oxidative damages. Hierarchical clustering based on overall physiological, biochemical and stress parameters confirmed that in Group I seedlings 100-200 mg L^-1 nZVI treatments were toxic where as in Group II seedlings 50-150 mg L^-1 nZVI treatments showed growth promoting effects. This differential response is due to developmental stage related resistance in plants.

Tetracycline removal using green synthesized bimetallic nZVI-Cu and bentonite supported green nZVI-Cu nanocomposite: A comparative study

Antibiotics, one of the most abundant contaminants in the natural water systems possess various difficulties to remediate through conventional water treatment methods. Tetracycline (TC) remains one of the most widely used antibiotics for human and veterinary applications because of its broad-spectrum antibacterial activity. In the current study, we have employed nano zero-valent technology-based antibiotic remediation. In a first of its kind work, we applied bimetallic nZVI-Cu nanoparticles synthesized using pomegranate rind extract for remediation. TC removal of 72 ± 0.5% (initial TC concentration 10 mg/L) was obtained with the nZVI-Cu concentration of 750 mg/L at pH 7. To overcome the colloidal instability and enhance TC removal further, the bimetallic nanoparticles were formed in-situ over bentonite. The bentonite supported composite (B/nZVI-Cu) was used to treat TC an initial concentration of 10 mg/L and the results confirmed significant enhancement in removal with a substantially decreased nanoparticle loading. Using only 150 mg/L of B/nZVI-Cu at pH 7, 95 ± 0.05% of TC could be removed. The nanoparticles and the composites were characterized by SEM, FT-IR, and XRD analyses. The removal process was followed by UV-Visible analyses in conjunction with TOC, ORP and LCMS measurements. For treatment using B/nZVI-Cu, the reusability of the composite was established up to three cycles of operation, and the process was validated in the real water systems. Substantially decreased residual toxicity of the composite treated TC solution lends credence to the environmental sustainability of the process.

Novel Technology for the Removal of Brilliant Green from Water: Influence of Post-Oxidation, Environmental Conditions, and Capping

Chemical dyes are used in a wide range of anthropogenic activities and are generally not biodegradable. Hence, sustainable recycling processes are needed to avoid their accumulation in the environment. A one-step synthesis of Fe_core-maghemite_shell (Fe-MM) for facile, instantaneous, cost-effective, sustainable, and efficient removal of brilliant green (BG) dye from water has been reported here. The homogenous and monolayer type of adsorption is, to our knowledge, the most efficient, with a maximum uptake capacity of 1000 mg·g^-1, for BG on Fe-MM. This adsorbent was shown to be efficient in occurring in time-scales of seconds and to be readily recyclable (ca. 91%). As iron/iron oxide possesses magnetic behavior, a strong magnet could be used to separate Fe-MM coated with BG. Thus, the recycling process required a minimum amount of energy. Capping Fe-MM by hydrophilic clay minerals further enhanced the BG uptake capacity, by reducing unwanted aggregation. Interestingly, capping the adsorbent by hydrophobic plastic (low-density polyethylene) had a completely inverse effect on clay minerals. BG removal using this method is found to be quite selective among the five common industrial dyes tested in this study. To shed light on the life cycle analysis of the composite in the environment, the influence of selected physicochemical factors (T, pH, hν, O₃, and NO₂) was examined, along with four types of water samples (melted snow, rain, river, and tap water). To evaluate the potential limitations of this technique, because of likely competitive reactions with metal ion contaminants in aquatic systems, additional experiments with 13 metal ions were performed. To decipher the adsorption mechanism, we deployed four reducing agents (NaBH₄, hydrazine, LiAlH₄, and polyphenols in green tea) and NaBH₄, exclusively, favored the generation of an efficient adsorbent via aerial oxidation. The drift of electron density from electron-rich Fe_core to maghemite shells was attributed to be responsible for the electrostatic adsorption of N⁺ in BG toward Fe-MM. This technology is deemed to be environmentally sustainable in environmental remediation, namely, in waste management protocol.

Removal of antibiotics from aqueous solutions by nanoparticles: a systematic review and meta-analysis

Antibiotics, as one of the emerging pollutants, are non-biodegradable compounds and long-term exposure to them may affect endocrine, hormonal, and genetic systems of human beings, representing a potential risk for both the environment and human health. The presence of antibiotics in surface waters and drinking water causes a global health concern. Many researches have stated that conventional methods used for wastewater treatment cannot fully remove antibiotic residues, and they may be detected in receiving waters. It is reported that nanoparticles could remove these compounds even at low concentration and under varied conditions of pH. The current study aimed to review the most relevant publications reporting the use of different nanoparticles to remove antibiotics from aqueous solutions. Moreover, meta-analysis was conducted on the results of some articles. Results of meta-analysis proved that different nanoparticles could remove antibiotics with an acceptable efficiency of 61%. Finally, this review revealed that nanoparticles are promising and efficient materials for degradation and removal of antibiotics from water and wastewater solutions. Furthermore, future perspectives of the new generation nanostructure adsorbents were discussed in this study.

Nanopriming with zero valent iron (nZVI) enhances germination and growth in aromatic rice cultivar (Oryza sativa cv. Gobindabhog L.)

Engineered nanoparticles are utilized in agriculture for various purposes. They can be used as fertilizer, carrier for macro/micro nutrients or priming agents. Various nanoparticles are reported to have toxicity at very high doses, but at optimum concentration, they can be beneficial for plant growth and development. In the present study, low concentrations of nZVI nanoparticles were evaluated for their growth enhancement potential as seed priming agent in an aromatic rice cultivar, Oryza sativa cv. Gobindabhog. Seeds were primed with different concentrations (10, 20, 40, 80, 160 mg L^-1) of nZVI and allowed to grow for 14 days. Seed germination and seedling growth were studied by assessing physiological, biochemical, and structural parameters at different time points. Maximum activities of hydrolytic and antioxidant enzymes, along with root dehydrogenase enzyme were observed in 20 mg L^-1 nZVI primed seeds. Priming with low doses of nZVI increased seedling vigour, as expressed by increased root and shoot length, biomass and photosynthetic pigment content. Our study also confirmed that after 14 days growth, the seedling showed absence of membrane damage, reduction in proline level and anti-oxidant enzyme activities. However, seedlings primed with 160 mg L^-1 nZVI suffered oxidative stress. SEM micrographs also revealed damage in root tissue at that concentration. AAS study confirmed uptake of nZVI by the rice plants as maximum level of iron was found in the plants treated with highest concentration (i.e. 160 mg L^-1 nZVI). Thus, nZVI at low concentrations can be considered as priming agent of rice seeds for increasing plant vigour.