Enhanced tetracycline adsorption onto hydroxyapatite by Fe(III) incorporation

Magnetization and ZIF-67 modification of Aspergillus flavus biomass for tetracycline removal from aqueous solutions: A stable and efficient composite

In the present work, the biomass of Aspergillus flavus (AF) was modified using magnetic nanoparticles MnFe2O4 and metal-organic framework of ZIF-67, and its ability to remove tetracycline antibiotic (TCH) was investigated. With the help of physicochemical tests, AF biomass modification with ZIF-67 and MnFe2O4 magnetic nanoparticles was confirmed. Based on the BET value, AF-MnFe2O4-ZIF-67 (139.83 m2/g) has a higher surface value than AF (0.786 m2/g) and AF/MnFe2O4 (17.504 m2/g). Also, the magnetic saturation value revealed that the modified biomass can be isolated from the treated solution using a simple magnetic field. Maximum TCH elimination (99.04%) using AF-MnFe2O4-ZIF-67 was obtained at pH 7, adsorber mass of 1 g/L, adsorption time of 40 min, and TCH content of 10 mg/L. The thermodynamic study indicated that the TCH abatement using the desired composite is spontaneous and exothermic. The experimental results showed that the adsorption process is compatible with the pseudo-second-order kinetic and Freundlich model. The maximum adsorption capacity for AF, AF-MnFe2O4, and AF-MnFe2O4-ZIF-67 was quantified to be 9.75 mg/g, 25.59 mg/g, and 43.87 mg/g, respectively. The reusability of the desired adsorbers was examined in up to 8 steps. The outcomes showed that the adsorbers can be used several times in TCH elimination. The provided composite can remove TCH from hospital wastewater, so it can be suggested for use in water and wastewater treatment works.

Advanced applications of hydroxyapatite nanocomposite materials for heavy metals and organic pollutants removal by adsorption and photocatalytic degradation: A review

This comprehensive review delves into the forefront of scientific exploration, focusing on hydroxyapatite-based nanocomposites (HANCs) and their transformative role in the adsorption of heavy metals (HMs) and organic pollutants (OPs). Nanoscale properties, including high surface area and porous structure, contribute to the enhanced adsorption capabilities of HANCs. The nanocomposites' reactive sites facilitate efficient contaminant interactions, resulting in improved kinetics and capacities. HANCs exhibit selective adsorption properties, showcasing the ability to discriminate between different contaminants. The eco-friendly synthesis methods and potential for recyclability position the HANCs as environmentally friendly solutions for adsorption processes. The review acknowledges the dynamic nature of the field, which is characterized by continuous innovation and a robust focus on ongoing research endeavors. The paper highlights the HANCs' selective adsorption capabilities of various HMs and OPs through various interactions, including hydrogen and electrostatic bonding. These materials are also used for aquatic pollutants' photocatalytic degradation, where reactive hydroxyl radicals are generated to oxidize organic pollutants quickly. Future perspectives explore novel compositions, fabrication methods, and applications, driving the evolution of HANCs for improved adsorption performance. This review provides a comprehensive synthesis of the state-of-the-art HANCs, offering insights into their diverse applications, sustainability aspects, and pivotal role in advancing adsorption technologies for HMs and OPs.

Simultaneous removal of phosphate and tetracycline using LaFeO3 functionalised magnetic biochar by obtained ultrasound-assisted sol-gel pyrolysis: Mechanisms and characterisation

Excessive phosphate and tetracycline (TC) contaminants pose a serious risk to human health and the ecological environment. As such exploring the simultaneous adsorption of phosphate and TC is garnering increasing attention. In this study, an efficient lanthanum ferrate magnetic biochar (FLBC) was synthesised from crab shells using an ultrasound-assisted sol-gel method to study its performance and mechanisms for phosphate and TC adsorption in aqueous solutions in mono/bis systems. According to the Langmuir model, the developed exhibited a maximum adsorption capacity of 65.62 mg/g for phosphate and 234.1 mg/g for TC (pH:7.0 ± 0.1, and 25 °C). Further, it exhibited high resistance to interference and pH suitability. In practical swine wastewater applications, whereby the concentrations of phosphate and TC are 37 and 19.97 mg/L, respectively, the proposed material demonstrated excellent performance. In addition, electrostatic adsorption, chemical precipitation and ligand exchange were noted to be the main mechanisms for phosphate adsorption by FLBC, whereas hydrogen bonding and π-π interaction were the main adsorption mechanisms for TC adsorption. Therefore, this study successfully prepared a novel and efficient adsorbent for phosphate and TC.

Effects of Cr(VI) oxyanion, humic acid and solution chemistry on the aggregation and colloidal stability of green synthesized chlorapatite nanoparticles

Aggregation is a crucial process determining the fate, mobility and ecological risks of nanomaterials. Chlorapatite nanoparticles (nClAP) exhibit widely applications in environmental remediation and consequently will inevitably enter aquatic systems. However, the aggregation characteristics of nClAP are still mostly uncovered. This study investigated the aggregation kinetics and colloidal stability of nClAP as a function of pH, humic acid (HA), Cr(VI) oxyanions, monovalent and divalent electrolytes. Results showed that pH values from 5 to 9 had a notable impact on the aqueous behaviors of nClAP. The addition of HA made the zeta potential (ZP) of nClAP more negative and thus enhanced nClAP stability through electrostatic and steric effects. Similarly, the adsorption of Cr(VI) on the surface of nClAP created a physical barrier and negative charge, improving the stability of nClAP by inducing steric force. Lower ZP and hydrodynamic diameter (HDD) reflected that the enhanced stability of nClAP by HA was more significant than Cr(VI). In comparison, the presence of Ca2+ ions were more effective than monovalent Na + ions in promoting the aggregation of nClAP. The classical DLVO theory incorporating the steric repulsion were used to interpret the aggregation and dispersion of nClAP, making it was easier to overcome energy barriers and agglomerate. This study provides new mechanistic insights which could help better understand the effects of Cr(VI) oxyanions and HA on nClAP's colloidal stability.

Recent advances in luminescence and aptamer sensors based analytical determination, adsorptive removal, degradation of the tetracycline antibiotics, an overview and outlook

Tetracycline antibiotics (TCs), one of the important antibiotic groups, have been widely used in human and veterinary medicines. Their residues in foodstuff, soil and sewage have caused serious threats to food safety, ecological environment and human health. Here, we reviewed the potential harms of TCs residues to foodstuff, environment and human beings, discussed the luminescence and aptamer sensors based analytical determination, adsorptive removal, and degradation strategies of TCs residues from a recent 5-year period. The advantages and intrinsic limitations of these strategies have been compared and discussed, the potential challenges and opportunities in TCs residues degradation have also been deliberated and explored.

Performance and mechanism of phosphorus adsorption removal from wastewater by a Ce-Zr-Al composite adsorbent

With the increasingly serious eutrophication of global water bodies and the strict discharge standards of tail water in wastewater treatment plants (WWTPs), there is an urgent technology need for efficient deep phosphorus removal from wastewater. A composite cerium-based adsorbent (Ce-Zr-Al) was synthesized by coprecipitation method for the adsorption of low concentration phosphorus in water. The performance of the Ce-Zr-Al composite adsorbent was explored, and the mechanism was also revealed through the analyses including SEM, BET, XPS, and FT-IR. The results showed that the composite adsorbent had excellent phosphorus removal performance. The phosphorus removal rate reached up to 92.6%, and the phosphorus concentration in effluent was less than 0.074 mg/L. The phosphate adsorption capacity of saturation was 73.51 mg/g. The adsorption process of phosphate was in accordance with pseudo-second-order kinetic model and Langmuir model. In addition, the composite adsorbent had a high zero potential point (pH _PZC= 8) and a wide range of pH application. After the repeated desorption for 10 times in NaOH solution, the composite adsorbent still maintained good adsorbability (adsorption rate > 94%). The ligand exchange and electrostatic adsorption played the main role for the phosphorus removal from water using the composite adsorbent.

Adsorption behaviors and influencing factors of antibiotic norfloxacin on natural kaolinite-humic composite colloids in aquatic environment

Particles are ubiquitous and abundant in natural waters and play a crucial role in the fate and bioavailability of organic pollution. In the present study, natural mineral (kaolinites, KL), organic (humic/fulvic acid, HA/FA) and their composite particles were further separated into particles fractions (PFs, >1 μm) and colloidal fractions (CFs, 1 kDa-1 μm) by cross-flow ultrafiltration (CFUF). This research demonstrated the role of kaolinite-humic composite colloids on the adsorption of fluoroquinolone norfloxacin (NOR). The Freundlich model satisfactory described adsorption curves, showing strong affinity of NOR to CFs, with sorption capacity (K_F) between 8975.50 and 16638.13 for NOR. The adsorption capacities of NOR decreased with the particle size increasing from CFs to PFs. In addition, composite CFs showed excellent adsorption capacity, which was mainly attributed to the larger specific surface area of composite CFs and electronegativity and numerous oxygen-containing functional groups on the surfaces of the complexes, and electrostatic attraction, hydrogen bond and cation exchange could dominate the NOR adsorption onto the composite CFs. The best pH value under adsorption condition of composite CFs varied from weakly acidic to neutral with the increase of load amount of humic and fulvic acids on the surface of inorganic particles. The adsorption decreased with higher cation strength, larger cation radius and higher cation valence, which depended on the surface charge of colloids and the molecular shape of NOR. These results provided insight into the interfacial behaviors of NOR on the surfaces of natural colloids and promoted the understanding of the migration and transport of antibiotics in environmental systems.

Phosphorus recovery and reuse in water bodies with simple ball-milled Ca-loaded biochar

The demand to control eutrophication in water bodies and the risk of phosphorus scarcity have prompted the search for treatment technologies for phosphorus recovery. In this study, ball-milled Ca-loaded biochar (BMCa@BC) composites were prepared with CaO and corn stover biochar as raw materials by a new ball-milling method to recover phosphorus from water bodies. Experimental results demonstrated that BMCa@BC could efficiently adsorb phosphorus in water bodies with an excellent sorption capacity of 329 mg P/g. Hydrogen bonding, electrostatic attraction, complexation, and surface precipitation were involved in adsorption process. In addition, phosphorus recovered by BMCa@BC had high bioavailability (86.7 % of TP) and low loss (3.3 % of TP) and was a potential slow-release fertilizer. P-laden BMCa@BC significantly enhanced seed germination and growth in planting experiments, proving that it could be used as a substitute for P-based fertilizer. After five cycles of regeneration, BMCa@BC still showed good adsorption recovery and the P-enriched desorption solution could be recovered as Ca-P products with the fertilizer value. Overall, BMCa@BC has good cost-effectiveness and practical applicability in phosphorus recovery. This provides a new way to recover and reuse phosphorus effectively.

Efficiency Recycling and Utilization of Phosphate from Wastewater Using LDHs-Modified Biochar

The excessive application of phosphate fertilizers easily causes water eutrophication. Phosphorus recovery by adsorption is regarded as an effective and simple intervention to control water bodies' eutrophication. In this work, a series of new adsorbents, layered double hydroxides (LDHs)-modified biochar (BC) with different molar ratios of Mg2+ and Fe3+, were synthesized based on waste jute stalk and used for recycling phosphate from wastewater. The prepared LDHs-BC4 (the molar ratio of Mg/Fe is 4:1) has significantly high adsorption performance, and the recovery rate of phosphate is about 10 times higher than that of the pristine jute stalk BC. The maximum adsorption capacity of LDHs-BC4 for phosphate was 10.64 mg-P/g. The main mechanism of phosphate adsorption mainly includes electrostatic attraction, ion exchange, ligand exchange, and intragranular diffusion. Moreover, the phosphate-adsorbed LDHs-BC4 could promote mung bean growth, which indicated the recovery phosphate from wastewater could be used as a fertilizer.

Effects of Various Ripening Media on the Mesoporous Structure and Morphology of Hydroxyapatite Powders

Mesoporous hydroxyapatite (HA) materials demonstrate advantages as catalysts and as support systems for catalysis, as adsorbent materials for removing contamination from soil and water, and as nanocarriers of functional agents for bone-related therapies. The present research demonstrates the possibility of the enlargement of the Brunauer-Emmett-Teller specific surface area (SSA), pore volume, and average pore diameter via changing the synthesis medium and ripening the material in the mother solution after the precipitation processes have been completed. HA powders were investigated via chemical analysis, X-ray diffraction analysis, Fourier-transform IR spectroscopy, transmission electron microscopy (TEM), and scanning (SEM) electron microscopy. Their SSA, pore volume, and pore-size distributions were determined via low-temperature nitrogen adsorption measurements, the zeta potential was established, and electron paramagnetic resonance (EPR) spectroscopy was performed. When the materials were synthesized in water-ethanol and water-acetone media, the SSA and total pore volume were 52.1 m²g^-1 and 116.4 m²g^-1, and 0.231 and 0.286 cm³g^-1, respectively. After ripening for 21 days, the particle morphology changed, the length/width aspect ratio decreased, and looser and smaller powder agglomerates were obtained. These changes in their characteristics led to an increase in SSA for the water and water-ethanol samples, while pore volume demonstrated a multiplied increase for all samples, reaching 0.593 cm³g^-1 for the water-acetone sample.

Enhanced adsorption capacity of tetracycline on porous graphitic biochar with an ultra-large surface area†

Excessive tetracycline in the water environment may lead to the harming of human and ecosystem health. Removing tetracycline antibiotics from aqueous solution is currently a most urgent issue. Porous graphitic biochar with an ultra-large surface area was successfully prepared by a one-step method. The effects of activation temperature, activation time, and activator dosage on the structural changes of biochar were investigated by scanning electron microscopy, Brunauer–Emmett–Teller, X-ray powder diffraction, and Raman spectroscopy. The effect of the structure change, adsorption time, temperature, initial pH, and co-existing ions on the tetracycline removal efficiency was also investigated. The results show that temperature had the most potent effect on the specific surface area, pore structure, and extent of graphitization. The ultra-large surface area and pore structure of biochar are critical to the removal of tetracycline. The q_e of porous graphitic biochar could reach 1122.2 mg g⁻¹ at room temperature. The calculations of density functional theory indicate that π–π stacking interaction and p–π stacking interaction can enhance the tetracycline adsorption on the ultra-large surface area of graphitic biochar.

1. A ultra-large surface area of porous graphitic biochar was successfully using corn starch and ZnCl₂ by a one-step method. 2. The adsorption capacity of tetracycline on the biochar could get 1122.2 mg g⁻¹ at room temperature.

Environmental Hazards of Nanobiomaterials (Hydroxyapatite-Based NMs)-A Case Study with Folsomia candida-Effects from Long Term Exposure

Hydroxyapatite (HA) is a calcium phosphate used in many fields, including biomedical applications. In particular, ion-doped HA nanomaterials (nHA) are developed for their increased bioactivity, particularly in the fields of regenerative medicine and nanomedicine. In this study, we assessed the ecotoxicological impact of five nHA materials: a synthesized calcium hydroxyapatite (CaP-HA), superparamagnetic iron-doped hydroxyapatite (Fe-HA), titanium-doped hydroxyapatite (Ti-HA), alginate/titanium-doped hydroxyapatite hybrid composite (Ti-HA-Alg), and a commercial HA. The soil ecotoxicology model species Folsomia candida (Collembola) was used, and besides the standard reproduction test (28 days), an extension to the standard for one more generation was performed (56 days). Assessed endpoints included the standard survival and reproduction, and additionally, growth. Exposure via the standard (28 days) did not cause toxicity, but reproduction increased in commercial HA (significantly at 320 mg HA/kg) whereas via the extension (56 days) it decreased in all tested concentrations. Juveniles' size (56 days) was reduced in all tested nHA materials, except commercial HA. nHA materials seem to trigger a compromise between reproduction and growth. Long-term effects could not be predicted based on the standard shorter exposure; hence, the testing of at least two generations (56 days) is recommended to assess the toxicity of nanomaterials, particularly in F. candida. Further, we found that the inclusion of size as additional endpoint is highly relevant.

Sustainable use of Ca(OH)2 modified biochar for phosphorus recovery and tetracycline removal from water

To prevent possible secondary pollution from phosphorus-loaded biochar (BC) in agricultural systems, this study investigated the sustainable use of Ca(OH)₂ modified wood biochars (Ca-BCs) for P recovery while significantly lowering the tetracycline (TC) adsorption onto Ca-BCs. Ca-BCs were prepared via calcination of mixtures of Ca(OH)₂ and wood BC under 100-500 °C for removing P and TC from water. Compared to the pristine BC (without Ca(OH)₂ modification), Ca-BC100 (Ca-BC prepared at 100 °C) showed a significant increase of P adsorption capacity from 4.00 to 138.70 mg/g due to reactive interaction between P and Ca(OH)₂ on Ca-BC while decrease of TC adsorption capacity from 62.17 to 20.86 mg/g owing to decrease of surface area from 260.50 to 120.26 m²/g. Batch adsorption tests implied that the P adsorption on Ca-BC100 would occur mainly via electrostatic attraction (pH > 2.1) and formation of hydroxylapatite (Ca₅(PO₄)₃(OH)) between phosphate and Ca(OH)₂. In addition, Ca-BC100 reacted with TC via electrostatic attraction (pH > 7.6), complexation, hydrogen bond, and π-π interactions. P and TC adsorption onto Ca-BC100 was a chemical, endothermic, and spontaneous process. The dynamic adsorption experiments using a fixed bed column filled with Ca-BC100 indicated that Ca-BC100 could continuously and effectively remove P and TC from water. Ca-BC100 also effectively lowered P and COD in the dairy wastewater. Under the environmentally relevant conditions, continuous treatment of water containing P and TC using the pristine BC followed by Ca-BC100 showed the pristine BC removed 96% of TC and only 6% of P from water while Ca-BC100 made high recovery of P (94% of P) with negligible TC. Therefore, Ca-BC100 could be used for effective recovery of P with negligible TC from wastewater, and then applied to agricultural systems as a sustainable and safe P-rich biofertilizer.

Production and characterization of cost-effective magnetic pine bark biochar and its application to remove tetracycline from water

Low-cost adsorbent, pine bark biochar (PBB) from the forest residue, was produced and applied to remove tetracycline (TC) from aqueous solution via adsorption pathway. The PBB, hence obtained, was modified using aqueous ferric and ferrous ion solutions to obtain magnetic pine bark biochar (M-PBB). Batch adsorption experiments were conducted to examine the adsorption of TC by PBB and M-PBB in the variation of pH, contact time, dosage, and temperature. The adsorbents were characterized by SEM/EDX, TGA, and pH_pzc. The adsorption mechanism was evaluated by fitting Langmuir, Freundlich, Temkin, and Dubinin-Radushkevich (D-R) isotherms model. Also, the experimental data were analyzed by kinetics models (pseudo-first-order, pseudo-second-order, intra-particle diffusion, and Elovich) and thermodynamics. The maximum adsorption capacity (q_m) of M-PBB was 15.3 mg/g from the experiment at pH 6. A high correlation coefficient (R² ≈ 0.9) of Freundlich isotherm postulated multi-layer adsorption of TC on M-PBB at pH 6. The kinetic studies showed that the pseudo-first-order was more suitable for representing the adsorption of TC molecules on the surface. The thermodynamic analysis was showed that the adsorption process is favorable, spontaneous, and endothermic at studied temperatures. M-PBB demonstrated a potential for removal of TC from water as a low-cost and convenient adsorbent.

Ball milling sulfur-doped nano zero-valent iron @biochar composite for the efficient removal of phosphorus from water: Performance and mechanisms

This study successfully prepared a novel sulfur-doped nano zero-valent iron @biochar (BM-SnZVI@BC) by modifying corn stover biochar with Fe⁰ and S⁰ using a mechanical ball milling method for effective phosphorus (P) adsorption in the waterbody. Batch experiments revealed that BM-SnZVI@BC (BC/S⁰/Fe⁰ = 3:1:1) reached a Q_max of 25.00 mg P/g and followed PFO and Langmuir models. This work had shown that electrostatic attraction, surface chemical precipitation, hydrogen bonding, and ligand effects all contributed to P removal. Since the FeS layer mitigated the oxidation-induced surface passivation of nZVI, sulfidation significantly extended the lifetime of BM-SnZVI@BC, removing 84.4% of P even after 60 d aging in air. The regeneration experiments of composites showed that re-ball milling destroyed the surface iron oxide layer to improve the properties of the recovered material. This is an essential step in the design of P-removal agents to implement anti-aging and commercialization of adsorbents for engineering applications.

Magnetic MnFe2O4/ZnFe-LDH for Enhanced Phosphate and Cr (VI) Removal from Water

Due to the layered structure and recycling characteristics, magnetic MnFe2O4/ZnFe-LDH was prepared by co-precipitation. In this study, we intensively explored MnFe2O4/ZnFe-LDH for water purification compared with the ZnFe-LDH. The morphological and structural characteristics of the obtained products were systematically characterized. MnFe2O4/ZnFe-LDH exhibits the maximum adsorption capacity of 94.52 mg/g for phosphate and 49.03 mg/g for Cr (VI), respectively, which is superior to that of the ZnFe-LDH, indicating that the magnetic MnFe2O4 effectively enhanced adsorption performance. Meanwhile, the mechanism of adsorption of phosphate and Cr (VI) was briefly studied, where the metal center ion in MnFe2O4/ZnFe-LDH and between layers of SO42- serves as capture sites for phosphate and Cr (VI) removal. Furthermore, the MnFe2O4/ZnFe-LDH can be used for magnetic recycled and still maintained excellent removal efficiency (70%) for phosphate and Cr (VI) after five adsorption-desorption cycles. This work could open a new vista of designing magnetic novel adsorbents in environmental remediation.

The potential application of bio-based ceramic/organic xerogel derived from the plant sources: A new green adsorbent for removal of antibiotics from pharmaceutical wastewater

A bio-based ceramic/organic xerogel (BCO-xerogel) was obtained from the combination of sugarcane bagasse ash, polyvinyl alcohol, and pine cone-derived tannin extract, which are abundant, non-toxic, and renewable sources. The as-prepared BCO-xerogel was used as a low-cost green adsorbent for the eliminate of four types of the most widely used antibiotics, including amoxicillin (AMX), tetracycline (TC), cefalexin (CLX), and penicillin G (PEN G) residuals from contaminated water. The simultaneous effects conventional variables including adsorbent dosage, antibiotic concentrations, solution pH, and contact time were studied and optimized by central composite design (CCD) under response surface methodology (RSM). Analysis of variance (ANOVA) was employed as a statistical formula to determine the significance of operating environmental conditions and their interactions with 95% confidence limits. Under optimized conditions, the experimental removal efficiencies for AMX, TC, CLX, and PEN G were 98.78 ± 3.25, 99.12 ± 2.52, 98.02 ± 1.98, and 98.42 ± 2.19, respectively. The adsorption isotherms and kinetics were better fitted with Langmuir and pseudo-second-order models, respectively. Thermodynamic studies showed that the adsorption process was endothermic, spontaneous, and occurred by combination of physical and chemical mechanisms. Also, evaluating the ability of BCO-xerogel to adsorptive removal of AMX, TC, CLX, and PEN G antibiotics in real wastewaters showed about 97.4-98.6% adsorption efficiency in river water and about 67.1-71.3% in three hospital effluents. After the adsorption process, the antibiotic-loaded adsorbent was regenerated by NaOH (0.01 mol L^-1), and the reusability tests showed that the removal efficiencies of the antibiotics in the four recovery steps were still above 90%. This work explored the development of green, efficient, and economical bio-adsorbent that can be utilized for the removal of antibiotics from contaminated wastewaters.

Enhancing Cd(II) adsorption on rice straw biochar by modification of iron and manganese oxides

Metal oxide-modified biochar showed excellent adsorption performance in wastewater treatment. Iron nitrate and potassium permanganate were oxidative modifiers through which oxygen-containing groups and iron-manganese oxides could be introduced into biochar. In this study, iron-manganese (Fe-Mn) oxide-modified biochar (BC-FM) was synthesized using rice straw biochar, and the adsorption process, removal effect, and the mechanism of cadmium (Cd) adsorption on BC-FM in wastewater treatment were explored through batch adsorption experiments and characterization (SEM, BET, FTIR, XRD, and XPS). Adsorption kinetics showed that the maximum adsorption capacity of BC-FM for Cd(II) was 120.77 mg/g at 298 K, which was approximately 1.5-10 times the amount of adsorption capacity for Cd(II) by potassium-modified or manganese-modified biochar as mentioned in the literature. The Cd(II) adsorption of BC-FM was well fit by the pseudo-second-order adsorption and Langmuir models, and it was a spontaneous and endothermic process. Adsorption was mainly controlled via a chemical adsorption mechanism. Moreover, BC-FM could maintain a Cd removal rate of approximately 50% even when reused three times. Cd(II) capture by BC-FM was facilitated by coprecipitation, surface complexation, electrostatic attraction, and cation-π interaction. Additionally, the loaded Fe-Mn oxides also played an important role in the removal of Cd(II) by redox reaction and ion exchange in BC-FM. The results suggested that BC-FM could be used as an efficient adsorbent for treating Cd-contaminated wastewater.

Preparation of structured biochar, its adsorption capacity of N and P and its characterization

Structured biochar (SC) was prepared by biochar from cattail-sludge mixture (CS) and high-density polyethylene (HDPE) and treated as an adsorbent, and the KH₂PO₄ and NH₄Cl solution were treated as adsorbates, to explore the adsorption capacity of phosphorus (P) and nitrogen (N) on SC in water. A single factor experimental method was employed to determine the optimal parameters for SC. The results showed that: 60% sizing amount, 5 N (cm²)^-1 molding pressure, 160 °C molding temperature and 95 min molding time were optimal parameters for SC preparation. The adsorption of P and N on SC conforms to the Langmuir model, with the distribution of adsorption sites on the surface tending to be even. The adsorption of P and N on SC is favorable and spontaneous, and the adsorption tends to be monolayer adsorption with a major role for chemical adsorption. The higher the temperature, the higher the adsorption capacity of P and N on SC is, and the affinity of SC with P is higher than that with N. The pseudo-second-order kinetic model for the adsorption of N and P by SC has a high degree of fit. The pH_pzc value of SC was 8.57. The hydrophobicity and stability of SC are rather high, with the surface particles closely bonded and increased roughness and pore diameter. The adsorption mechanism of P and N on SC can be attributed to pore filling, electrostatic attraction and hydrogen bonding. The results can provide a new technology for the resource utilization of cattails and sludge, a new idea for the recycling and reuse of biochar, and a basis for the selection of materials for the treatment of eutrophic water bodies.

Facile construction of high-performance 3D Co2C-doped CoAl2O4 fiber composites for capturing and decomposing tetracycline from aqueous solution

Herein, novel 3D hollow-carved Co₂C-doped CoAl₂O₄ fiber composites (3D-CA-FC) were successfully synthesized via a simple-green pyrolysis method and exhibited remarkably outstanding elimination performance for tetracycline (TC) by adsorption and degradation. The results indicated that the TC adsorption process of the samples could be accurately described by the pseudo-second-order and Langmuir isothermal model, and the maximum TC uptake reached up to 1889.63 mg/g under neutral conditions. Meanwhile, 3D-CA-FC showed good affinity for TC and its adsorption capacity was greatly promoted due to the presence of humic acid, CO₃^2- ion and weakly alkaline environment. About complete degradation of TC could be completed within 60 min under suitable conditions. A significant improvement of catalyst rate was observed after the addition of CO₃^2- ion, because of the selective degradation of CO₃^•- to TC. BET, XPS and FT-IR analysis indicated that the mechanisms of TC uptake can be ascribed to pore-filling, H-bonds and complexation. Radical trapping experiments showed that ¹O₂ should serve as predominant contributions, and SO₄^•- and •OH also played a role in the degradation process. This study provides some inspiration for the construction of 3D-CA-FC as a novel and promising bifunctional material for the elimination of contaminants in water treatment.

Porous multifunctional phenylcarbamoylated-β-cyclodextrin polymers for rapid removal of aromatic organic pollutants

In this work, polymers containing a large number of benzene rings and multiple functional groups were designed to remove aromatic organic pollutants. Using tetrafluoroterephthalonitrile (TFTPN) as a rigid crosslinking agent to crosslink different functionalized phenylcarbamoylated-β-cyclodextrin derivatives to prepare a series of porous multifunctional cyclodextrin (CD) polymerizations, including three preliminary polymerized adsorption materials and a mix β-cyclodextrin polymer (X-CDP) prepared via a secondary crosslinking procedure of the above three materials. The X-CDP preparation process connects the pre-formed nanoparticles and increases the presence of linkers inside the particles. At the same time, X-CDP exhibited porous structure with various functional groups such as nitro, chlorine, fluorine, and hydroxyl. Those special characteristics render this material with good adsorption ability towards various aromatic organic pollutants in water, including tetracycline, ibuprofen, dichlorophenol, norfloxacin, bisphenol A, and naphthol. Especially, the maximum adsorption capacity for tetracycline at equilibrium reached 110.56 mg·g^-1, which is competitive with the adsorption capacities of other polysaccharide adsorbents. X-CDP removed organic contaminants much more quickly than other adsorbents, reaching almost ~95% of its equilibrium in only 30 s, and the rate constant reaches 2.32 g·mg^-1·min^-1. The main adsorption process of the pollutants by X-CDP fitted the pseudo-second-order kinetic and Langmuir isotherm well, indicating that the adsorption process is monolayer adsorption. Moreover, X-CDP possessed the good reusability where the pollutant removal rate was only reduced 8.3% after five cycles. Such advantages render the polymer great potential in the rapid treatment of organic pollutants in water bodies.

High-performance biochar derived from the residue of Chaga mushroom (Inonotus obliquus) for pollutants removal

A high-performance biochar derived from the residue of Chaga mushroom (Inonotus obliquus) was reported in this study. Inonotus obliquus residues were used to prepare biochar, and the optimal synthesis conditions were obtained by response surface methodology. The specific surface area, pore volume, and average pore size of the optimal biochar (Zn-IORBC) was 1676.78 m²/g, 1.87 cm³/g, and 3.88 nm, respectively. Methylene blue (MB) and tetracycline (TC) were selected to estimate the adsorption performance of Zn-IORBC. The adsorption process was suitable for the pseudo-second-order model and Langmuir model. Zn-IORBC could maintained a large amount of TC adsorption (the lowest value was 686.20 mg/g in mountain spring water) in different natural water. The maximum adsorption capacity of TC and MB was 947.42 and 1033.66 mg/g. The adsorption mechanism was contributed to the electrostatic attraction, hydrogen bonding, π-π interactions, and pore-filling. Zn-IORBC is an effective adsorbent for high-performance pollutants removal.

Nanocomposites of zero-valent iron@biochar derived from agricultural wastes for adsorptive removal of tetracyclines

Tetracycline antibiotics as the emerging pollutants had been drawn abroad increasing concerns. An agricultural waste, the lignocellulosic hazelnut shell, was used as the carbon source to prepare the nanocomposites of zero-valent iron@biochar by pyrolytic reduction method at 1123 K for 2 h in N₂ atmosphere. The adsorptive removal of tetracycline, oxytetracycline and chlortetracycline by the zero-valent iron@biochar from aqueous solution was investigated by batch method. The optimal experimental conditions were found to be at pH 6-7 with a contact time of 40 min. The adsorbed amounts of oxytetracycline, chlortetracycline and tetracycline at 298 K were 52.7, 42.5 and 39.1 mg g^-1, respectively. Adsorption process of three antibiotics by the nanocomposite pursued Langmuir and pseudo-second-order equations. Thermodynamic parameters illustrated that the adsorption was spontaneous and endothermic intrinsically. The high removal efficiencies up to 95% of the zero-valent iron@biochar for oxytetracycline and chlortetracycline from the culture wastewaters had opened the potential applications for the removal of the antibiotics.

Tetracycline removal from aqueous solution by biochar derived from algae and modified with MnMoO4: effects of operating parameters, isotherm, kinetic, and thermodynamic study

The aim of the present study is to improve the adsorption of tetracycline (TC) onto biochar of microalgae modified by nanocomposite of MnMoO₄ (MM40BC60). The synthesized nanocomposite was characterized by Scanning electron microscopy (SEM), Brunauer-Emmett-Teller (BET) surface area, Fourier transforms infrared (FTIR) spectroscopy to investigate the morphology, surface area, pores and the functional groups of MM40BC60, respectively. The effect of various parameters including initial pH, TC concentration, and temperature on the adsorption performance of TC to the adsorbent was evaluated with considering kinetics, isotherms, and thermodynamics models. The adsorption of TC on MM40BC60 shows good agreement with the pseudo-second-order kinetic and the Langmuir isotherm models. Results of the thermodynamic study showed that the adsorption process was a spontaneous and endothermic reaction in nature.

Chemical and computational strategy for design of "switchable" sorbent based on hydroxyapatite nanoparticles for dispersive micro-solid phase extraction of tetracyclines

A challenging task in analytical chemistry is an application of renewable and natural materials for isolation of hazardous substances such as antimicrobial drugs from environmental samples. The energy-efficient scalable hydrothermal procedure to fabricate the eco-friendly "switchable" sorbent based on hydroxyapatite nanoparticles with in situ modified surface using a small amount of capping agents was developed. Sorbents characterization including the surface composition investigation via quantum-chemical calculation based on the original approach was provided. The sorbents demonstrated well expressed controllable surface switching and high values of the sorption and elution efficiency for tetracycline, oxytetracycline, and chlortetracycline achieved by simple change of the medium pH. These processes were thoroughly discussed based on the results of chemical and computational experiments. A simple and universal strategy for choosing a suitable sorbent for solid phase extraction of target analytes was proposed for the first time. It was shown that the developed eco-friendly sample preparation procedure with use of biocompatible sorbents could be applied both for removal of target analytes from sample matrix (water samples) as well as for the quantitative analytes determination after elution step. It is believed that the presented research is significant for the determination of different amphoteric analytes in wide variety of samples.

A series of novel carbohydrate-based carbon adsorbents were synthesized by self-propagating combustion for tetracycline removal

Herein, a series of novel adsorbents derived from glucose, maltose, and starch zinc oxide (ZnO) loaded carbohydrate-based carbon materials (Zn-Cs) were synthesized by a fast and efficient self-propagating combustion synthesis method (SCS). The experimental results show that Zn-Cs exhibits excellent adsorption performance (>375 mg/g) to tetracycline, and the pseudo-second-order model and Freundlich model can better describe the adsorption data. The adsorption capacities of Zn-Cs were over 300 mg/g throughout the wide pH range (6-9), while various coexisting ions in the concentration range of 0-10 mg/L and the presence of humic acid had nearly no impact on the adsorption of tetracycline. Moreover, the adsorption experiment of simulated hospital wastewater shows that the adsorption capacity of Zn-Cs for tetracycline exceeds 185 mg/g. The adsorption mechanism of tetracycline are H-bond, complexation, and conjugation effect. This work provides an efficient, excellent versatility and time-saving strategy for preparing high-performance carbohydrate-based carbon materials for adsorbents.

Mesoporous Iron(III)-Doped Hydroxyapatite Nanopowders Obtained via Iron Oxalate

Mesoporous hydroxyapatite (HA) and iron(III)-doped HA (Fe-HA) are attractive materials for biomedical, catalytic, and environmental applications. In the present study, the nanopowders of HA and Fe-HA with a specific surface area up to 194.5 m²/g were synthesized by a simple precipitation route using iron oxalate as a source of Fe³⁺ cations. The influence of Fe³⁺ amount on the phase composition, powders morphology, Brunauer–Emmett–Teller (BET) specific surface area (S), and pore size distribution were investigated, as well as electron paramagnetic resonance and Mössbauer spectroscopy analysis were performed. According to obtained data, the Fe³⁺ ions were incorporated in the HA lattice, and also amorphous Fe oxides were formed contributed to the gradual increase in the S and pore volume of the powders. The Density Functional Theory calculations supported these findings and revealed Fe³⁺ inclusion in the crystalline region with the hybridization among Fe-3d and O-2p orbitals and a partly covalent bond formation, whilst the inclusion of Fe oxides assumed crystallinity damage and rather occurred in amorphous regions of HA nanomaterial. In vitro tests based on the MG-63 cell line demonstrated that the introduction of Fe³⁺ does not cause cytotoxicity and led to the enhanced cytocompatibility of HA.

Biomaterial-Based Nanocomposite for Osteogenic Repurposing of Doxycycline

Background

Besides its antimicrobial action, doxycycline (DX) has lately been repurposed as a small-molecule drug for osteogenic purposes. However, osteogenic DX application is impeded by its dose-dependent cytotoxicity. Further, high-dose DX impairs cell differentiation and mineralization.

Purpose

Integrating DX into a biomaterial-based delivery system that can control its release would not only ameliorate its cytotoxic actions but also augment its osteogenic activity. In this work, we managed to engineer novel composite DX–hydroxyapatite–polycaprolactone nanoparticles (DX/HAp/PCL) to modify DX osteogenic potential.

Methods

Employing a 2³-factorial design, we first optimized HApN for surface-area attributes to maximize DX loading. Composite DX/HAp/PCL were then realized using a simple emulsification technique, characterized using various in vitro methods, and evaluated for in vitro osteogenesis.

Results

The developed HApN exhibited a favorable crystalline structure, Ca:P elemental ratio (1.67), mesoporous nature, and large surface area. DX/HAp/PCL achieved the highest reported entrapment efficiency (94.77%±1.23%) of DX in PCL-based particles. The developed composite system achieved controlled release of the water-soluble DX over 24 days. Moreover, the novel composite nanosystem managed to significantly ameliorate DX cytotoxicity on bone-marrow stem cells, as well as enhance its overall proliferation potential. Alkaline phosphatase and mineralization assays revealed superior osteodifferentiation potential of the composite system. Quantification of gene expression demonstrated that while DX solution was able to drive bone-marrow stem cells down the osteogenic lineage into immature osteoblasts after 10-day culture, the innovative composite system allowed maturation of osteodifferentiated cells. To the best of our knowledge, this is the first work to elaborate the impact of DX on the expression of osteogenic genes: RUNX2, OSP, and BSP. Further, the osteogenicity of a DX-loaded particulate-delivery system has not been previously investigated.

Conclusion

Our findings indicate that repurposing low-dose DX in complementary biomaterial-based nanosystems can offer a prominent osteogenic candidate for bone-regeneration purposes.

Enhanced Cr(VI) removal from water using a green synthesized nanocrystalline chlorapatite: Physicochemical interpretations and fixed-bed column mathematical model study

Apatite-based minerals have attracted much attention in the remediation of heavy metal-contaminated environment. However, exploring apatite with efficient adsorption performance for inorganic oxyanions such as Cr(VI) remains a challenge. Herein, a novel nanocrystalline chlorapatite (ClAP) was promptly prepared by a green method using eggshell wastes as calcium source with the purpose to enhance Cr(VI) adsorption capability. The generated ClAP was characterized by XRD, SEM-EPMA, TEM, FTIR, and BET analyses. Batch and column experiments were subsequently carried out to explore the influencing factors, adsorption capacity and removal mechanism. Results showed that ClAP exhibited excellent stability and adsorption performance for Cr(VI) (63.47 mg g^-1), which was much greater than that of hydroxyapatite and most reported materials. The adsorption process was fitted well by the pseudo-second-order model and the Langmuir model. In fixed bed column experiments, a novel time-fractional derivative model exhibited much better suitability in interpreting the observed breakthrough curves of Cr(VI) than traditional models. Furthermore, the reusability of ClAP in column was evaluated. Results showed that the adsorption capacity maintained well after consecutively reused for five cycles. Studies of the effect of pH, as well as FTIR and XPS investigations indicated that Cr(VI) adsorption was mainly ascribed to electrostatic interactions and surface complexation, while the reduction of Cr(VI) to the low-toxicity Cr(III) also existed in the adsorption process. The ClAP adsorbent was also successfully used for Cr(VI) remediation from real wastewater. Hence, nanocrystalline ClAP can be a promising material for enhancing the elimination of oxyanion contaminants such as Cr(VI) from water.

Prediction and optimization of adsorption properties for Cs+on NiSiO@NiAlFe LDHs hollow spheres from aqueous solution: Kinetics, isotherms, and BBD model

In this work, novel NiSiO@NiAlFe layered double hydroxides (LDHs) hollow spheres were prepared by hydrothermal method. It was worth noting that LDHs' grafting towards NiSiO hollow spheres could avoid the LDHs' aggregation, and thus enhanced the material's adsorption capacity. Furthermore, adsorption kinetics, adsorption isotherms, and Box-Behnken Design (BBD) model were conducted. Results indicated that NiSiO@NiAlFe LDHs hollow spheres had sufficient adsorption capability towards Cs⁺. The adsorption kinetics satisfied the pseudo-second-order adsorption model, Temkin model and Langmuir isotherm model. The adsorption process was efficient at the alkaline condition (pH = 10). The adsorption kinetics indicated that the adsorption process could reach the equilibrium in only 20 min. The maximum adsorption capacity of Cs⁺ towards NiSiO@NiAlFe LDHs hollow spheres was estimated to be 61.5 mg g^-1. Moreover, the adsorption thermodynamics indicated that the adsorption process was exothermal, feasible and spontaneous. Thus, NiSiO@NiAlFe LDHs hollow spheres presented a broad potential for treating cesium containing wastewater.

Application of biogenic iron precipitation by strain H117 for tetracycline removal: mechanism of adsorption and activation

To date, biogenic metals have opened up a window for new applications in adsorption of contaminants. But there is still little attention to be paid in the removal of tetracycline (TC) by biogenic iron precipitation (BIP). In this paper, the BIP, from iron-based mixotrophic denitrification batch reactor, was estimated for its adsorption property of TC under various parameters to simulate the behavior in aquatic environment. The maximum adsorption capacity for TC was 195.336 mg g^-1. Analyses of spectrum verified the existence of Fe₃O₄ and FeOOH in BIP, which was the main reason for the removal of TC. The adsorption kinetic and isotherm of TC were well fitted to Elovich and Langmuir isotherm models, respectively, indicating that the adsorption process was mainly controlled by chemical adsorption. Furthermore, we proposed a potential mechanism of adsorption: a combination of cation-π, hydrogen bonding (H-bonding), and electrostatic interaction. Additionally, the activation experiment showed that BIP could enhance the degradation of TC (more than 98.00% removal within 1.0 h) by advanced oxidation process (AOP), due to the existence of FeOOH and Fe₃O₄. Considering its effectiveness in both adsorption and activation performance, BIP is highlighted as an economical and eco-friendly material for TC removal and offers a promising method to resolve sludge disposal in biological treatment of iron-rich groundwater.

Facile and Economical Functionalized Hay Biochar with Dairy Effluent for Adsorption of Tetracycline

The present study reports a novel hay biochar functionalized with dairy effluent for enhanced tetracycline (TC) adsorption in the aqueous phase for the first time. The enrichment of hay (i.e., alfalfa) with dairy effluent led to significant accumulation of cationic metals during biochar production. The dairy effluent-functionalized alfalfa biochar (DEAF-BC) possessed strong crystallization (i.e., CaCO3), functional groups (i.e., CO3 2-, C-O stretching), and high surface area (334 m2/g) related to TC adsorption. Therefore, DEAF-BC showed higher TC adsorption capacity (835.7 mg/g) than that of the alfalfa biochar (94.5 mg/g). The adsorption isotherm and kinetic results for the DEAF-BC were correlated with the Freundlich, pseudo-second-order, and intraparticle diffusion models for TC. For the TC adsorption onto DEAF-BC, the thermodynamic analysis implied a spontaneous and endothermic process. Possible mechanisms would include metal complexation, hydrogen bonding, van der Waals forces, and π-π interaction.

Adsorption behavior of tetracycline onto Spirulina sp. (microalgae)-derived biochars produced at different temperatures

We evaluated the production of Spirulina sp. (microalgae)-derived biochars (SPAL-BCs) at different pyrolysis temperatures for the removal of an emerging water contaminant, tetracycline (TC). Physicochemical properties of SPAL-BCs were characterized and related with their capacity to adsorb TC. Increasing pyrolysis temperatures led to higher aromaticity, higher hydrophobicity, and higher specific surface area. In particular, SPAL-BC750 possessed the highest hydrophobicity, various strong crystallizations (i.e., calcite, hydroxyapatite, and rhenanite) and functional groups (i.e., CH₂, CN, CO, and CO₃^2-), which may be associated with high TC adsorption. SPAL-BC750 also presented the highest TC adsorption capacity (132.8 mg TC/g biochar) via batch experimentation because of hydrophobic, π-π interactions, functional groups, and metal complexation. The best fitting isotherm and kinetic models of TC adsorption by SPAL-BC750 were the Langmuir and pseudo-first order models, respectively. SPAL-BCs obtained as a by-product of pyrolysis may be an economical and potentially valuable adsorbent for aqueous antibiotic removal.

Effects of divalent copper on tetracycline degradation and the proposed transformation pathway

To reveal the characteristics of tetracycline (TC) photocatalytic degradation under Cu(II) coexistence, effects of Cu(II) on TC photocatalytic degradation by ZnO nanoparticles (ZnO NPs) as a function of pH, humic acid (HA), and initial Cu(II) concentration were investigated. Interaction of TC with Cu(II) in the treatment process was analyzed by circular dichroism (CD) spectroscopy, while TC degradation pathway was investigated by high-performance liquid chromatography-mass spectrometry. Sixty-five percent and ninety-one percent TC degradation within 60 min in the absence and presence of Cu(II), respectively, was reported. Both adsorption and photocatalytic degradation of TC under Cu(II) coexistence increased with increasing pH from 3 to 6, while decreased with further increase in pH. HA inhibited the degradation of TC by ZnO NPs both in the presence as well absence of Cu(II), while TC degradation decreased from 91 to 73% and from 73 to 37% in the presence and absence of Cu(II), respectively. TC degradation by ZnO NPs first increased then decreased with increasing Cu(II). Maximum TC degradation (about 94%) was obtained in the optimum concentration range of Cu(II) (0.05-0.15 mmol/L). In addition, there was a lag effect between TC adsorption and degradation on ZnO NPs. TC degradation was improved via Cu(II)-TC surface complexation and followed N-demethylation and hydroxylation routes. This study could be of potential importance in extrapolating the transformation of TC or other antibiotics under the coexistence of heavy metals in water.

Mechanism study of metal ion adsorption on porous hydroxyapatite: experiments and modeling

In this study, low-cost biomaterial hydroxyapatite (N-Hap) prepared from bovine bones was tested for its potential to sorb copper Cu2+ and Fe3+ from aqueous solution and was compared with commercial hydroxyapatite (C-Hap). The structural characterization of N-Hap and C-Hap were carried out by Fourier transform infrared (FTIR) analysis, textural analysis (BET), morphology, and elemental analysis via scanning electron microscopy (SEM-EDX). The results obtained show that SEM images confirmed the formation of porous N-Hap with various morphologies and the average particle size ranges from 50 to 100 nm and the CaP ratio is 1.657. The presence of functional groups on N-Hap surface was confirmed by FTIR analysis. The specific surface areas of N-Hap and C-Hap are found to be 46.87 and 40.98 m2/g, respectively. Adsorption of two metals Cu2+ and Fe3+ was fast, with equilibrium attained within 30 min. Copper ions exhibited the greatest adsorption on both adsorbents because of their size and pH conditions. Metallic ion removal efficiency was favored at a slightly acidic solution pH and low temperature. The equilibrium and kinetic data were found to fit well the Langmuir model and the pseudo second order model with intraparticle diffusion. Thermodynamic parameters (ΔHads < 0 and ΔGads < 0) involved the exothermic, spontaneous, and physical adsorption process. The adsorption interaction of Cu2+ and Fe3+ with Hap surface was investigated by theoretical density functional theory (DFT) calculations. Therefore, the porous hydroxyapatite N-Hap displays potential as a new biocompatible adsorbent, and its use seems to be an interesting solution for the treatment of industrial wastewater.

Amino-functionalized mesoporous silica-magnetic graphene oxide nanocomposites as water-dispersible adsorbents for the removal of the oxytetracycline antibiotic from aqueous solutions: adsorption performance, effects of coexisting ions, and natural organic matter

The amino-functionalized mesoporous silica-magnetic graphene oxide nanocomposite (A-mGO-Si) was synthesized and used for oxytetracycline (OTC) removal from water. Various factors like the effects of initial concentration, contact time, and influence of pH were investigated. Selective adsorption experiments in connection with coexisting ions and dissolved organic matter (DOM) were also investigated. In this study, humic acid (HA) and tannic acid (TA) were representative of both hydrophobic and hydrophilic DOM, respectively. Results indicated that A-mGO-Si had an adsorption ability for OTC that was relatively greater than that of virgin magnetic graphene oxide (mGO), graphene oxide (GO), Fe₃O₄ particles, and SBA-15 mesoporous silica and also showed a better uptake removal capacity for OTC at low initial concentration in comparison with the other adsorbents. The adsorption behavior of OTC onto A-mGO-Si could be described by the pseudo-second-order kinetic model and the Freundlich isotherm model. The electrostatic interaction has no influence on the OTC absorbed when the OTC is in an aqueous medium in its zwitterion form (3.22 < pH < 7.46). At high pH, the weak π-π EDA interactions and hydrogen bonding may manifest themselves, hence causing a lower adsorption capacity. The main adsorption mechanisms were plausibly activated by H-bonding, and π-π EDA interactions, while the electrostatic interaction (cation-π interaction) might be the minor adsorption mechanism. Addition of individually exogenous ions (Na⁺, Mg²⁺, NO^-, and CO₃^2-) resulted in a decrease of OTC adsorption due to the emergence of a competitive effect. Considering the presence of HA and TA in mixed solute systems, the DOM was likely to form a stronger interaction system with mGO-Si, thereby resulting in an adsorption level which was more competitive in the process at low aqueous phase concentration of OTC. In contrast to the high aqueous phase, the coexistence of DOM could promote OTC adsorption. The phenomenon may reflect the result that a surface complexation mechanism could achieve in adsorptions.

A review on tetracycline removal from aqueous systems by advanced treatment techniques

Tetracycline occurrence and advanced treatment techniques.

A novel Biochar modified by Chitosan-Fe/S for tetracycline adsorption and studies on site energy distribution

A novel wasted sludge-based Biochar modified by Chitosan and Fe/S (BCFe/S) was prepared for tetracycline (TC) removal from water. To investigate the similarities and differences in adsorption behaviors between Biochar and BCFe/S, characterization, kinetics, isotherms and thermodynamics were discussed. The studies on site energy distribution (SED) were also presented. The results showed that the maximum TC adsorption amount was 51.78 mg/g for Biochar, while it was 183.01 mg/g for BCFe/S-4. Meanwhile, electrostatic attraction, π-π stacking, pore filling, silicate bonding and hydrogen bonding were the main adsorption mechanisms for TC removal by Biochar. Besides above mechanisms, chelating and ion exchange were also accounted for adsorption mechanisms for TC uptake by BCFe/S-4. Moreover, SED results revealed that the surface of Biochar was more homogeneous while the surface of BCFe/S-4 was more heterogeneous at higher temperature. Findings of this work could offer valuable information in designing adsorbents and investigating adsorption mechanisms.