Green and eco-friendly nanocomposite for the removal of toxic Hg(II) metal ion from aqueous environment: Adsorption kinetics & isotherm modelling

Theory guided engineering of zeolite adsorbents for acaricide residue adsorption from the environment

CONTEXT

Zeolites have attracted attention for their potential in adsorbing environmental contaminants. However, contaminants, such as acaricides used extensively in livestock production to control ticks and mites, have received limited exploration regarding their adsorption onto zeolite surfaces. This study aimed to identify the most appropriate zeolite frameworks for the adsorption of acaricide residues, deduce the mechanism underlying the adsorption process, and evaluate the impact of surface modification on the adsorption capabilities of zeolites.

METHODS

Grand Canonical Monte Carlo (GCMC) was used to screen the entire zeolite database to analyze their adsorption properties, where the cloverite zeolite framework (CLO) exhibits the highest adsorption capacity (percentage weight, 54%). Machine learning was employed to rank structural feature importance on adsorption. Density and helium void fraction appeared to be the most important structural features. Thus, engineering these features is of utmost significance in harvesting the desired acaricides. The second step involved engineering the structural and electronic properties of the shortlisted zeolite frameworks via cation substitution with suitable atoms. DFT calculations involving natural bond orbital (NBO) analysis and quantum theory of atoms in molecules (QTAIM) have been done to understand the influence of cation substitution on the electronic structure.

Upcycling of sugar refining mud solid waste as a novel adsorbent for removing methylene blue and Congo red from wastewater

The feasibility of utilizing the mud solid waste (MSW) produced during the carbonation process of sugar refining as a cost-effective and environmentally friendly alternative for the water removal of methylene blue (MB) and Congo red (CR), being highly utilized organic dyes representing cationic and anionic species, respectively is presented. Prior to its use, the MSW was dried at 110 °C for 24 h and sieved through a 100-mesh screen. The chief constituent of the MSW utilized was CaCO3, with a point of zero charge (PZC) found at pH 8.4 and 7.96 m2 g-1 total surface area. XRD and FTIR data indicate the presence of interactions between the dyes and the MSW surface, indicating effective adsorption. Different variables, such as initial dye concentration, MSW weight, solution pH, contact time, and temperature, were all examined to determine the optimal dye removal conditions. A central composite design (CCD) approach based on response surface methodology (RSM) modeling was utilized to identify statistically significant parameters for MB and CR adsorption capacities onto the MSW adsorbent. The removal equilibrium was typically reached in 120 minutes, with the greatest removal efficiency of CR taking place at pH 2 and 328 K, while the highest MB removal efficiency was obtained at pH 12 and 296 K. Kinetic studies suggest the adsorption of both dyes on the MSW follow pseudo-second-order rates, as evident through the high correlations obtained. Linearized and non-linearized Langmuir models showed strong correlations indicating maximum adsorption capacities of 86.6 and 72.3 mg g-1 for MB and CR, respectively. High regeneration and reusability potential of the MSW was demonstrated especially for the adsorption of CR, where the removal efficiency was nearly constant throughout five adsorption cycles, ranging from 93 to 91%, while the reduction in the removal for MB was much more significantly impacted, diminishing from 95 to 79% after the five cycles.

Chitosan-based adsorptive membrane modified by carboxymethyl cellulose for heavy metal ion adsorption: Experimental and density functional theory investigations

Low adsorption capacity and weak mechanical stability are the main drawbacks of chitosan (CS)-based adsorptive membranes for heavy metal ion removal. Polyvinyl alcohol (PVA) has been used to improve the mechanical stability of CS membranes, but adsorption capacity is disregarded. In the current study, the surface of the chitosan/polyvinyl alcohol (CP) membrane was modified using carboxymethyl cellulose (CMC) to increase its heavy metal ion adsorption capacity. Experimental and density functional theory (DFT) calculations were used to evaluate the heavy metal ion (As3+ and Cr3+) adsorption capabilities of CP and carboxymethyl cellulose-functionalized CP (CMC-CP) membranes. The batch adsorption process presented a higher heavy metal adsorption capacity of the CMC-CP membrane (As3+/CMC-CP = 234.78 mg/g and Cr3+/CMC-CP = 230.12 mg/g) compared to the CP membrane (As3+/CP = 89.02 mg/g and Cr3+/CP = 75.61 mg/g). The heavy metal/CMC-CP complexes confirmed higher adsorption energies (As3+/CMC-CP = -23.62 kcal/mol and Cr3+/CMC-CP = -23.21 kcal/mol) than the heavy metal/CP complexes (As3+/CP = -3.47 kcal/mol and Cr3+/CP = -2.92 kcal/mol). The electronic band structure was higher for CMC-CP (5.42 eV) compared to CP (4.43 eV). Experimental and theoretical findings were close, implying that the CMC-CP membrane has superior heavy metal adsorption capability than the CP membrane.

Physicochemical investigation of mercury sorption on mesoporous thioacetamide/chitosan from wastewater

Mercury is a toxic environmental element, so it was necessary to prepare a new, highly efficient, cheap sorbent to remove it. A mesoporous thioacetamide/chitosan (MTA/CS) was manufactured via a simplistic strategy; the chitin deacetylation to gain chitosan (CS) and the addition of thioacetamide. The as-prepared MTA/CS was characterized using X-ray diffraction, EDX, SEM, FTIR, and BET surface analysis. According to the findings, the MTA/CS was effectively synthesized. The removal behaviors of Hg2+ onto MTA/CS composite were inspected, which suggested that the MTA/CS composite exhibited great sorption properties for Hg2+ in liquid solutions. The maximal Hg2+ sorption capacity was 195 mg/g. The effects of temperature, Hg2+ concentration, contacting time, and MTA/CS concentration on sorption were analyzed. The 2nd-order model and Langmuir isotherm were suitable for the physicochemical adsorption processes. Thermodynamic analysis showed that the Hg2+ adsorption process onto the MTA/CS composite is exothermic and occurred spontaneously. The desorption condition of Hg2+ from its loaded MTA/CS was also gained. Likewise, the MTA/CS sorbent was undoubtedly regenerated by 0.8 M NaNO3 80 min contacting and 1:50 S:L ratio. The versatility and durability of MTA/CS sorbent were investigated via nine sorption-extraction cycles. The optimum parameters were applied to wastewater. Based on the result, the as-prepared MTA/CS might be a potential sorbent for removing Hg2+ from liquid solutions.

Utilization of electron beam irradiated carboxymethyl cellulose/polyvinyl alcohol/banana peels composite film for remediation of dyes from wastewater

In this work, polymeric composite films were fabricated utilizing stable, non-toxic, soluble, low-cost, good mechanical, and biocompatible polymers such as CMC and PVA with the waste of one of the most current fruits consumed worldwide banana peel waste (BP) as a filler. Sequences of carboxymethyl cellulose/polyvinyl alcohol/banana peel (CMC/PVA/BP) composite films with various amounts of BP utilizing eco-friendly technique (electron beam) (EB) irradiation were prepared to eliminate common hazardous organic pollutants such as methylene blue (MB) dye from its solutions. Physical characteristics like; swelling and gel % were examined. The chemical structure, thermal stability, and surface morphology were examined utilizing FT-IR, TGA, DSC, XRD, EDX, and SEM. Additionally, the UV/Vis spectroscopy study was investigated to study the impact of the various parameters such as irradiation, contact time, pH, temperature, adsorbent dosage, and initial concentration on removal efficiency % of MB dye onto the prepared composite films. The adsorption process fitted with the Langmuir model, pseudo-second-order kinetic model, endothermic, favorable, and spontaneous. The adsorption capacity of MB dye onto the CMC/PVA/BP composite film was 19.6 mg/g at the optimum conditions: irradiation dose = 20 kGy, contact time = 120 min, pH = 10, temperature = 25 °C, adsorbent dosage = 0.1 g and initial conc. = 10 mg/L.

Green and Sustainable Membranes: A review

Membranes are ubiquitous tools for modern water treatment technology that critically eliminate hazardous materials such as organic, inorganic, heavy metals, and biomedical pollutants. Nowadays, nano-membranes are of particular interest for myriad applications such as water treatment, desalination, ion exchange, ion concentration control, and several kinds of biomedical applications. However, this state-of-the-art technology suffers from some drawbacks, e.g., toxicity and fouling of contaminants, which makes the synthesis of green and sustainable membranes indeed safety-threatening. Typically, sustainability, non-toxicity, performance optimization, and commercialization are concerns centered on manufacturing green synthesized membranes. Thus, critical issues related to toxicity, biosafety, and mechanistic aspects of green-synthesized nano-membranes have to be systematically and comprehensively reviewed and discussed. Herein we evaluate various aspects of green nano-membranes in terms of their synthesis, characterization, recycling, and commercialization aspects. Nanomaterials intended for nano-membrane development are classified in view of their chemistry/synthesis, advantages, and limitations. Indeed, attaining prominent adsorption capacity and selectivity in green-synthesized nano-membranes requires multi-objective optimization of a number of materials and manufacturing parameters. In addition, the efficacy and removal performance of green nano-membranes are analyzed theoretically and experimentally to provide researchers and manufacturers with a comprehensive image of green nano-membrane efficiency under real environmental conditions.

Facile fabrication of Eu-based metal-organic frameworks for highly efficient capture of tetracycline hydrochloride from aqueous solutions

The tetracycline hydrochloride (TCH) removal from wastewater is important for the environment and human health yet challenging. Herein, the Eu-based MOF, Eu(BTC) (BTC represents 1,3,5-trimesic acid) was prepared by an efficient and environmental-friendly strategy, and then was used for the TCH capture for the first time. The Eu(BTC) was characterized by different methods such as X-ray diffraction, scanning electron microscopy and Fourier-transform infrared spectroscopy. The TCH uptake of Eu(BTC) was investigated systematically. The influences of experiment conditions such as solution pH value, adsorption time and initial concentration on TCH capacity of Eu(BTC) were also studied. The Eu(BTC) obtained exhibited remarkable TCH uptake (q_m was up to 397.65 mg/g), which was much higher than those of most materials such as UiO-66/PDA/BC (184.30 mg/g), PDA-NFsM (161.30 mg/g) and many carbon-based materials reported till now. Besides, the TCH adsorption behavior on Eu(BTC) was explored by Freundlich and Langmuir equations, and the adsorption mechanism was further analyzed. The experimental results suggested that the TCH adsorption mechanism of Eu(BTC) included the π-π interaction, electrostatic interaction and coordinate bonds. The excellent TCH adsorption performance and the efficient fabrication strategy make the Eu(BTC) prepared promising in TCH removal.

Purification and thermodynamic characterization of acid protease with novel properties from Melilotus indicus leaves

A thermostable acid protease from M. indicus leaves was purified 10-fold using a 4-step protocol. We were able to isolate a purified protease fraction with a molecular weight of 50 kDa and exhibited maximal protease activity at pH 4.0 and 40 °C. Structural analysis revealed that the protease is monomeric and non-glycosylated. The addition of epoxy monocarboxylic acid, iodoacetic acid, and dimethyl sulfoxide significantly reduced protease activity while dramatically increasing the inhibition of Mn²⁺, Fe²⁺, and Cu²⁺. The activation energy of the hydrolysis reaction (33.33 kJ mol^-1) and activation energy (E_d = 105 kJ mol^-1), the standard enthalpy variation of reversible protease unfolding (2.58 kJ/mol) were calculated after activity measurements at various temperatures. Thermal inactivation of the pure enzyme followed first-order kinetics. The half-life (t_1/2) of the pure enzyme at 50 °C, 60 °C, and 70 °C was 385, 231, and 154 min, respectively. Thermodynamic parameters (entropy and enthalpy) suggested that the protease was highly thermostable. This is the first report on the thermodynamic parameters of proteases produced by M. indicus. The novel protease appears to be particularly thermostable and may be important for industrial applications based on these thermodynamic properties.

Spatiotemporal based response for methylene blue removal using surface modified calcium carbonate microspheres coated with Bacillus sp

Calcium carbonate microspheres are attractive for their biocompatibility, high loading capacity and easy preparation. They can be used in biomedicine and catalytic applications. In the present work, calcium carbonate microspheres were surface modified with polyvinylpyrrolidone (PVP) followed by irradiation at 5 kGy prior to coating with Bacillus sp. cells. To provide cell protection and internal energy storage, polyhydroxybutyrate (PHB) was induced using 3 factors 2 levels factorial design where the order of effect on PHB% was pH > incubation time > glucose concentration. The highest production was 81.68 PHB% at pH 9, 20 g L^-1 glucose and 4 days incubation time. Bacillus sp. cells grown under PHB optimal conditions were used to coat the surface modified calcium carbonate microspheres. Characterization was performed using X-ray diffraction, Fourier Transform Infrared Spectroscopy, Dynamic light Scattering, Zeta potential and Scanning Electron Microscopy. The results obtained confirm the formation and coating of microspheres of 2.34 μm and -16 mV. The prepared microspheres were used in bioremoval of methylene blue dye, the results showed spatiotemporal response for MB-microsphere interaction, where PHB induced Bacillus sp. coated microspheres initially adsorb MB to its outer surface within 1 h but decolorization takes place when the incubation time extends to 18 h. The microspheres can be reused up to 3 times with the same efficiency and with no desorption. These results suggest that the surface modified calcium carbonate can be tailored according to the requirement which can be delivery of biomaterial, bioadsorption or bioremediation.

Application of magnetic carbon nanocomposite from agro-waste for the removal of pollutants from water and wastewater

Water pollution has significant impact on water usage, and various contaminants, such as organic and inorganic compounds, heavy metals, dyes, pharmaceuticals compounds, pathogens and radioactive compounds, are implicated. The quest for globalisation, structural developments and other related anthropogenic activities promote the release of contaminants that induce water pollution. Hence, treatment and remediation options that can remove pollutants from watercourses and wastewater have been developed. Applied nanotechnology using carbon nanocomposites has recently drawn attention because it has the advantages of low preparation cost, high surface area, pore volume and environmental stability. Magnetic carbon nanocomposites usually exhibit excellent performance in adsorbing contaminants from aqueous solutions, and thus expanding the use of nanotechnology in water treatment is of great importance. Therefore, this review explores the geographical outlook of water pollution, sources of water pollution and types of contaminants found in water and discusses the use of carbon nanocomposites as an emerging sustainable technology for water pollutant removal. The various properties of carbon-based composites influence the extent of pollutant adsorption during water treatment processes. Most carbon-based nanocomposites are generated from biomass produced by agro-waste materials. Magnetic activated carbon nanocomposites produced from walnut shells and rice husk waste can remove 78% of Cd(II) from contaminated aqueous systems. Magnetic nanocomposites from peanut shell, tea waste, curcumin nanoparticles, sunflower head waste, rice husk, hydrophyte biomass, palm waste and sugarcane bagasse facilitate hydrothermal carbonisation, chemical precipitation, co-precipitation, chemical activation, calcination and fast pyrolysis. These nanocomposites have benefitted wastewater treatment by increasing efficiency in removing pharmaceutical, dye and organic contaminants, such as promazine, ciprofloxacin, amoxicillin, rhodamine 6G, methyl blue, phenol and phenanthrene. Hence, this review discusses the relatively low costs, good biocompatibility, large surface-to-volume ratio, magnetic separation capability and reusability carbon materials and highlights the advantages of using magnetic carbon nanocomposites in the removal of contaminants from water or wastewater through adsorption mechanisms.

Efficient mercury removal from aqueous solutions using carboxylated Ti3C2Tx MXene

Water supplies contaminated with heavy metals are a worldwide concern. MXenes have properties that make them attractive for the removal of metal ions from water. This work presents a simple one-step method of Ti₃C₂T_x carboxylation that involves the use of a chelating agent with a linear structure, providing strong carboxylic acid groups with high mobility. The carboxylation decreases the zeta-potential of Ti₃C₂T_x by ~16 to ~18 mV over a pH range of 2.0-8.5 and improves Ti₃C₂T_x stability in the presence of molecular oxygen. pH in the range of 2-6 has a negligible effect on the adsorption capacity of Ti₃C₂T_x and COOH-Ti₃C₂T_x. Compared to Ti₃C₂T_x, COOH-Ti₃C₂T_x has a slightly higher and much faster mercury uptake, and the concentration of mercury ions leached out from COOH-Ti₃C₂T_x is lower. For both Ti₃C₂T_x and COOH-Ti₃C₂T_x, the leached mercury ion concentration is far below the U.S.-EPA maximum level. At an initial Hg²⁺ concentration of 50 ppm and pH of 6, COOH-Ti₃C₂T_x has the equilibrium adsorption capacity of 499.7 mg/g and removes 95% of Hg²⁺ in less than 1 min. Moreover, it has an equilibrium time of 5 min, which is significantly shorter than that of Ti₃C₂T_x (~ 60 min). Finally, its mercury-ion uptake capacity is higher than commercially available adsorbents reported in the literature. Its mercury removal is mainly via chemisorption and monolayer adsorption.

Recent advances on botanical biosynthesis of nanoparticles for catalytic, water treatment and agricultural applications: A review

Green synthesis of nanoparticles using plant extracts minimizes the usage of toxic chemicals or energy. Here, we concentrate on the green synthesis of nanoparticles using natural compounds from plant extracts and their applications in catalysis, water treatment and agriculture. Polyphenols, flavonoid, rutin, quercetin, myricetin, kaempferol, coumarin, and gallic acid in the plant extracts engage in the reduction and stabilization of green nanoparticles. Ten types of nanoparticles involving Ag, Au, Cu, Pt, CuO, ZnO, MgO, TiO₂, Fe₃O₄, and ZrO₂ with emphasis on their formation mechanism are illuminated. We find that green nanoparticles serve as excellent, and recyclable catalysts for reduction of nitrophenols and synthesis of organic compounds with high yields of 83-100% and at least 5 recycles. Many emerging pollutants such as synthetic dyes, antibiotics, heavy metal and oils are effectively mitigated (90-100%) using green nanoparticles. In agriculture, green nanoparticles efficiently immobilize toxic compounds in soil. They are also sufficient nanopesticides to kill harmful larvae, and nanoinsecticides against dangerous vectors of pathogens. As potential nanofertilizers and nanoagrochemicals, green nanoparticles will open a revolution in green agriculture for sustainable development.

New approach for starch dialdehyde preparation using microwave irradiation for removal of heavy metal ions from water

This work presents a new and simple approach to prepare Dialdehyde Starch (DAS) in one step under microwave irradiations and using, a mild and safer oxidizing agent, potassium iodate. Aldehyde content was evaluated to compare the synthesis results with DAS prepared using potassium periodate as an oxidizing agent for starch. To optimize the synthesis parameters of the new approach, the effect of the quantity of oxidizing agent and the effect of reaction time on the content of aldehyde in DAS were evaluated. According to the results, the optimized time was 10 min at the power of 300 W, and the number of moles of oxidizing agent was 0.014 mol per 2 g of starch. After that, DAS was used to prepare two Schiff bases by reaction with urea (DASU) and thiourea (DASTU), respectively. DAS, DASU and DASTU were characterized by FTIR, XRD, and SEM. Furthermore, DAS, DASU and DASTU were investigated for removing Cu(II), Pb(II), Hg(II), Cd(II), and Cr(III) ions from water. DAS showed the highest removal efficiency towards Pb(II) ions, whereas DASTU exhibited excellent ability for removing the Hg(II) ions. The removal efficiencies of DAS for Pb(II) ions and DASTU for Hg(II) ions are 95.25% and 89.45%, respectively from aqueous solutions containing 100 ppm of respective ions. Adsorption isotherm study suggests that adsorption follows Langmuir isotherm model, (correlation factors (R2) for Langmuir and Freundlich models for DAS/Pb are equal to 0.984 and 0.799, respectively, and for DASTU/Hg they are 0.995 and 0.813, respectively). The theoretical maximum adsorption capacity for DAS/Pb and DASTU/Hg are 245.09 and 180.83 mg/g, respectively.

Synergistic removal of As(V) from aqueous solution by nanozero valent iron loaded with zeolite 5A synthesized from fly ash

Nanozero valent iron (NZVI) loaded on zeolite 5A can efficiently remove As(V) in water through the synergism of zeolite 5A and NZVI. In this study, zeolite 5A was first obtained by ion exchange using zeolite 4A synthesized from fly ash and CaCl₂, and then NZVI-5A zeolite was synthesized by a reduction method to load NZVI on zeolite 5 A. NZVI-5A zeolite had a specific surface area of 238 m²/g. The As(V) removal capacity by NZVI-5A zeolite was 72.09 mg/g by the Langmuir model fitting, and the removal capacity was almost not affected by solution pH in the pH range of 4-12. As(V) was removed by the precipitation of Ca²⁺ in zeolite 5A with As(V), Ca²⁺ and NZVI with As(V), and the reduction and inner ball complex reaction of NZVI. The As(V) removal efficiency by NZVI-5A zeolite was almost unaffected by the coexistence of CO₃^2-, SO₄^2-, NO^3- and Cl^- but decreased with high concentrations of PO₄^3- in solution. The NZVI-5A zeolite could efficiently remove metal ions coexisting with As(V) in solution. The As(V) removal efficiency by the NZVI-5A zeolite was 84.0% after 5 cycles, and the NZVI-5A zeolite could be separated from the solution with an external magnetic field.

Industrial lignins: the potential for efficient removal of Cr(VI) from wastewater

Cr(VI), a serious threat to human health, widely exists in the effluents of various industrial processes. In this paper, the potential of industrial lignin for efficient removal of Cr(VI) from wastewater was systematically investigated, including pulping black liquor lignin (BLN), enzymolysis lignin (ELN), and SPORL pretreatment spent liquor (FS). The structure characterizations of three lignins were investigated by thermogravimetry (TG), Fourier transform infrared (FTIR) spectroscopy, Brunauer-Emmett-Teller (BET) surface area measurement, scanning electron microscope (SEM), and X-ray photoelectron spectroscopy (XPS). Among these three lignins, BLN showed the highest adsorption amount of Cr(VI) and good selectivity in wastewater simulation. According to the Langmuir model, the calculated maximum adsorption amount of Cr(VI) on ELN, BLN, and FS was 801.57, 864.30, and 642.26 mg g^-1, respectively. The adsorption of Cr(VI) by industrial lignins was a chemisorption process, during which Cr(VI) was reduced to low-toxic Cr(III). This paper provided a promising application for the effective utilization of industrial lignins.

Study on the Adsorption Performance of Casein/Graphene Oxide Aerogel for Methylene Blue

Casein (CS) and graphene oxide (GO) were employed for the fabrication of a casein/graphene oxide (CS/GO) aerogel by vacuum freeze drying. Fourier transform infrared spectroscopy, scanning electron microscopy, surface area and micropore analysis (BET), and thermogravimetric analysis were used to characterize the specific surface area, structure, thermal stability, and morphology of the CS/GO aerogel. The influence of experimental parameters such as the GO mass fraction in the aerogel, metering of the adsorbent, pH, contact time, and temperature on the adsorption capacity of the CS/GO aerogel on methylene blue (MB) was also investigated. According to Langmuir isotherm determination, the maximum removal rate of MB from the CS/GO aerogel was 437.29 mg/g when the temperature was 293 K and pH was 8. Through kinetic and thermodynamic studies, it is found that adsorption follows a pseudo-second-order reaction model and is also an exothermic and spontaneous process.

Simultaneous adsorption of mercury species from aquatic environments using magnetic nanoparticles coated with nanomeric silver functionalized with l-Cysteine

We introduce a novel, efficient and fast method for the total and simultaneous removal of monomethylmercury, dimethylmercury, ethylmercury and Hg (II) from aquatic environments using magnetic core nanoparticles, coated with metallic nanomeric silver and functionalized with l-Cysteine. As far as the authors know, simultaneous removal has not been achieved previously. The experimental design was based on exploring a wide range of experimental conditions, including pH of the medium (2-12), contact time (up to 20 min), adsorbent dose (50-800 μL) and temperature (293-323 K), in order to achieve the highest adsorption efficiency. The results show that, for a pH equal to 6.2 at room temperature, 400 μL of nanoparticles is sufficient to achieve 100% adsorption efficiency for all the studied Hg species after a contact time of 30 s. The adsorbent was characterized by means of Scanning Electron Microscopy, Energy Dispersive X-ray Analysis, Fourier-Transform Infrared Spectroscopy and a BET test. Moreover, the procedure allows the total recovery and recycling of the nanoparticles using 50 μL of 0.01 M KI. As regards reuse, the adsorbent exhibits no loss of adsorption capacity during the first three adsorption cycles. Thermodynamics reveals that adsorption is of a physicochemical nature, the equilibrium isotherms being described by a Langmuir model for all the Hg species. The ability of the method to simultaneously adsorb all species of mercury present in water, achieving full adsorption in just a few seconds, along with the simple experimental conditions and its cost-effectiveness, strongly support the approach as an alternative to current procedures.

Evaluation of poly(ethylene diamine-trimesoyl chloride)-modified diatomite as efficient adsorbent for removal of rhodamine B from wastewater samples

Diatomite (D) as a low-cost and eco-friendly clay was modified by ethylene diamine (EDA)-trimesoyl chloride (TMC) polymer to achieve a novel adsorbent for efficient removal of rhodamine B dye (RB) from wastewater samples. The EDA-TMC polymer was grafted to the surface of diatomite by in situ interfacial polymerization. The prepared p(EDA-TMC)/D adsorbent was characterized by XRD, FTIR, and SEM/EDX techniques. The effective experimental parameters on the adsorption performance were optimized with factorial design analysis. The equilibrium data were better correlated by non-linear Langmuir model compared to non-linear Freundlich model. The Langmuir monolayer adsorption capacity of the p(EDA-TMC)/D adsorbent was determined as 371.8 mg g^-1. The key adsorption parameters were optimized by experimental design analysis. The kinetic findings showed the adsorption mechanism of RB onto p(EDA-TMC)/D adsorbent was well designated by the pseudo-second-order kinetic model. The thermodynamic results indicate that the RB adsorption had an exothermic character in thermal nature and was less favorable with increasing temperature from 20 to 60 °C. Furthermore, the adsorption/desorption yield of p(EDA-TMC)/D was still 80%/70% after 5^th cycle and reduced to 60%/52% at the end of 8^th cycle. Thus, the present study revealed that the developed p(EDA-TMC)/D composite had great adsorption potential for removal of RB from wastewater samples compared to that of different kinds of adsorbents reported in the literature.

Achieving highly efficient and selective cesium extraction using 1,3-di-octyloxycalix[4]arene-crown-6 in n-octanol based solvent system: experimental and DFT investigation

Due to the long half-life of ¹³⁷Cs (t_1/2 ∼ 30 years), the selective extraction of cesium (Cs) from high level liquid waste is of paramount importance in the back end of the nuclear fuel cycle to avoid long term surveillance of high radiotoxic waste. As 1,3-di-octyloxycalix[4]arene-crown-6 (CC6) is suggested to be a promising candidate for selective Cs extraction, the improvement in the Cs extraction efficiency by CC6 has been investigated through the optimization of the effect of dielectric media on the extraction process. The effects of the feed acid (HNO₃, HCl, and HClO₄) and the composition of the diluents for the ligand in the organic phase on the extraction efficiency of Cs have been investigated systematically. In 100% n-octanol medium, Cs is found to form a 1 : 1 ion-pair complex with CC6 (0.03 M) providing a very high distribution ratio of D_Cs ∼ 22, suggesting n-octanol as the most suitable diluent for Cs extraction. No significant interference of other relevant cations such as Na, Mg and Sr was observed on the D_Cs value in the optimized solvent system. Density functional theory (DFT) based calculations have been carried out to elucidate the reason of ionic selectivity and enhanced Cs extraction efficiency of CC6 in the studied diluent systems. In addition to the ionic size-based selectivity of the crown-6 cavity, the polarity of the organic solvent system, the hydration energy of the ion, and the relative reorganization of CC6 upon complexation with Cs are understood to have roles in achieving the enhanced efficiency for the extraction of Cs by the CC6 extractant in nitrobenzene medium.

Separation scheme was developed for selective extraction of long-lived fission product ¹³⁷Cs using substituted calix crown 6 ether from aqueous acidic solution.

Corn bracts loading copper sulfide for rapid adsorption of Hg(II) and sequential efficient reuse as a photocatalyst

Hg(II) ions in wastewater are highly toxic to the environment and human health, yet many materials to remove the ions exhibit lower adsorption efficiency, and few studies report the reuse of Hg(II)-loaded waste materials. Here, a cheap and efficient adsorbent was prepared for the removal of Hg(II) based on corn bracts (CB) loading copper sulfide (CuS), and the Hg(II)-adsorbed material was reused as a photocatalyst. By changing the adsorption variables such as pH, adsorbent dosage, Hg(II) concentration, contact time and coexisting ions, the optimum adsorption conditions were obtained. The study indicated the adsorption capacity and removal rate of CB/CuS reached 249.58 mg/g and 99.83% at pH 6 with 20 mg CB/CuS, 50 mL Hg(II) concentration (100 mg/L) and 60 min, and coexisting ions did not affect the uptake of Hg(II). The adsorption behavior of CB/CuS toward Hg(II) followed pseudo-second-order and Langmuir models, with the theoretical maximum adsorption capacity of 316.46 mg/g. Finally, we explored an alternative strategy to dispose of spent adsorbents by converting the CB/CuS/HgS into a photocatalyst for the degradation of rhodamine B, with a removal rate of 98%. Overall, this work not only develops a promising material for the treatment of Hg(II)-containing wastewater, but opens up a new approach for the use of the waste adsorbent.

Methylene Blue Dye Adsorption from Wastewater Using Hydroxyapatite/Gold Nanocomposite: Kinetic and Thermodynamics Studies

The present work demonstrates the development of hydroxyapatite (HA)/gold (Au) nanocomposites to increase the adsorption of methylene blue (MB) dye from the wastewater. HA nanopowder was prepared via a wet chemical precipitation method by means of Ca(OH)₂ and H₃PO₄ as starting materials. The biosynthesis of gold nanoparticles (AuNPs) has been reported for the first time by using the plant extract of Acrocarpus fraxinifolius. Finally, the as-prepared HA nanopowder was mixed with an optimized AuNPs solution to produce HA/Au nanocomposite. The prepared HA/Au nanocomposite was studied by using Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), and Scanning Electron Microscopy (SEM) with Energy Dispersive X-Ray Analysis (EDX) analysis. Adsorption studies were executed by batch experiments on the synthesized composite. The effect of the amount of adsorbent, pH, dye concentration and temperature was studied. Pseudo-first-order and pseudo-second-order models were used to fit the kinetic data and the kinetic modeling results reflected that the experimental data is perfectly matched with the pseudo-first-order kinetic model. The dye adsorbed waste materials have also been investigated against Pseudomonas aeruginosa, Micrococcus luteus, and Staphylococcus aureus bacteria by the agar well diffusion method. The inhibition zones of dye adsorbed samples are more or less the same as compared to as-prepared samples. The results so obtained indicates the suitability of the synthesized sample to be exploited as an adsorbent for effective treatment of MB dye from wastewater and dye adsorbed waste as an effective antibacterial agent from an economic point of view.

Selenium functionalized magnetic nanocomposite as an effective mercury (II) ion scavenger from environmental water and industrial wastewater samples

A novel core-shell magnetic-selenium nanocomposite (Fe₃O₄@SiO₂@Se) was synthesized for fast and effective removal of Hg (II) ions from various industrial and environmental water samples. The composition, property, and structure of Fe₃O₄@SiO₂@Se were characterized by spectral and microscopic techniques. The key parameters affecting the removal were evaluated and optimized. The concentration of residual Hg (II) ions in the solution was measured using a cold vapor atomic absorption spectrometer. At pH = 3.0, Fe₃O₄@SiO₂@Se was capable to remove Hg (II) ions ranged from 100 μg L^-1 to 10 mg L^-1 within 20 min with the efficiency of approximately 99% in a way that residual concentration levels matched international standards. This level of removal efficiency was well maintained up to salinity of 25 g L^-1. Kinetic investigations revealed compliance with a second-order kinetic model. The linear regression coefficient suggested the adsorption of Hg (II) ions by the adsorbent followed the Langmuir isotherm model (R² > 0.997). The maximum capacity of the adsorbent obtained through investigating the isotherms was 70.42 mg g^-1. The Fe₃O₄@SiO₂@Se adsorbent effectively removed the Hg (II) ions spiked to different samples, including tap water, river water, seawater, and industrial wastewater. Therefore, this nano-adsorbent can be used as a good alternative for Hg (II) removal, in practical applications.

Adsorption Behaviors of Palladium Ion from Nitric Acid Solution by a Silica-based Hybrid Donor Adsorbent

The adsorption behaviors of a silica-based hybrid donor adsorbent (TAMIA-EH+1-dodecanol)/SiO2-P towards Pd(II) were investigated under the effect of the contact time, temperature etc. in simulated high-level liquid waste. The adsorption rates of Pd(II) and Re(VII) were fairly fast and could reach the equilibrium state in only 1 h compared with other co-existing metal ions. The adsorption kinetics of Pd(II) was found to fit well with the pseudo-first order model. Even though with increasing the concentration of HNO3 above 1 M, the adsorption performance of (TAMIA-EH+1-dodecanol)/SiO2-P decreased gradually; it still exhibited a better selectivity towards Pd(II) when [HNO3] > 0.5 M. The adsorption isotherms of Pd(II) and Re(VII) were well-described by the Langmuir isotherm model, while the Freundlich isotherm model was considered to be more suitable for the adsorption of Ru(III), Zr(IV) and Mo(VI). A high temperature of an aqueous solution was not good for the effective recovery of Pd(II). The calculated thermodynamic parameters revealed that the adsorption of Pd(II) was exothermic in nature.

Fabrication of Highly Porous Polymeric Nanocomposite for the Removal of Radioactive U(VI) and Eu(III) Ions from Aqueous Solution

In the present study, a polymeric nanocomposite, CoFe2O4@DHBF, was fabricated using 2,4 dihydroxybenzaldehyde and formaldehyde in basic medium with CoFe2O4 nanoparticles. The fabricated nanocomposite was characterized using FTIR, TGA, XRD, SEM, TEM, and XPS analyses. The analytical results revealed that the magnetic nanocomposite was fabricated successfully with high surface area 370.24 m2/g. The fabricated CoFe2O4@DHBF was used as an efficient adsorbent for the adsorption of U(VI) and Eu(III) ions from contaminated water. pH, initial concentration, adsorption time, and the temperature of the contaminated water solution affecting the adsorption ability of the nanocomposites were studied. The batch adsorption results exposed that the adsorption capacity for the removal of U(VI) and Eu(III) was found to be 237.5 and 225.5 mg/g. The adsorption kinetics support that both the metal ions follow second order adsorption kinetics. The adsorption isotherm well fits with the Langmuir adsorption isotherm and the correlation coefficient (R2) values were found to be 0.9920 and 0.9913 for the adsorption of U(VI) and Eu(III), respectively. It was noticed that the fabricated nanocomposites show excellent regeneration ability and about 220.1 and 211.3 mg/g adsorption capacity remains with U(VI) and Eu(III) under optimum conditions.

Fabrication of starch-salicylaldehyde based polymer nanocomposite (PNC) for the removal of pollutants from contaminated water

In the present study, we have fabricated magnetic nanocomposite based on the starch and salicylaldehyde resin embedded with magnetic Fe₃O₄ nanoparticles (SS@Fe₃O₄). The fabricated nanocomposite was characterized using various analytical methods including XRD, SEM, FTIR, TGA, TEM, BET and XPS. As-fabricated nanocomposite was used for the adsorption of Pb(II) and Cd(II) from aqueous solution. The adsorption results revealed that the maximum adsorption capacity was found to be 265.4 and 247.2 mg/g for Pb(II) and Cd(II) respectively at pH 6 and room temperature. The adsorption kinetic results support that the adsorption of both the toxic metals was carried out via second order reaction and the rate constants were found to be 6.31 × 10^-5 and 7.18 × 10^-5 g·mg^-1·min^-1 for Pb(II) and Cd(II) respectively. The adsorption isotherm displays the Langmuir adsorption isotherm and supports the monolayer and mainly chemisorption with poor physisorption. Additionally, the thermodynamic parameters were evaluated and the adsorption came true in exothermically and spontaneously with both Pb(II) and Cd(II). As-fabricated starch based magnetic nanocomposite displays excellent adsorption as well as outstanding reusability. Therefore, these outcomes support that the SS@Fe₃O₄ nanocomposite can be used as a promising adsorbent for industrial application.

Surface functionalization of recycled polyacrylonitrile fibers with ethylenediamine for highly effective adsorption of Hg(II) from contaminated waters

In this research, recycled polyacrylonitrile fibers (PANFs) acquired from the textile recycling process were amino-functionalized in one simple step by means of ethylenediamine (EDA). The amino-functionalized polyacrylonitrile fibers (AF-PANFs) were utilized for adsorption of Hg(II) ions from aquatic media. Temperature and contact time during the synthesis were optimized by the Central Composite Design (CCD) method. FE-SEM, EDS, BET, and FT-IR analysis, and pH_ZPC measurement were conducted to characterize the features of the AF-PANFs. The average diameter of raw fiber was 20 μm, which increased 20 percent after functionalizing. The impact of independent parameters on the adsorption process was investigated using the Box-Behnken Design (BBD) method during the batch experiments. The column tests were conducted in a semi-continuous system with the removal efficiency of over 99% for various initial concentrations after specific cycles. Freundlich, Langmuir, UT, Redlich-Peterson, and Temkin isotherm models were employed to analyze the relation between the final concentration of Hg(II) (C_o) and the equilibrium adsorption capacity (q_e) of the AF-PANFs. According to the isotherm models and experimental results, the maximum q_e of the AF-PANFs was 1116 mg g^-1 at initial Hg(II) concentration of 850 mg L^-1, contact time of 120 min, solution pH of 6, and at 40 °C. Kinetic and thermodynamic studies illustrated the approximate equilibrium time and endothermicity or exothermicity of the process. Regeneration of the AF-PANFs was accomplished for seven times without efficiency drop. The superb performance of the AF-PANFs in the presence of co-existing ions did not decline.

Adsorption Processing for the Removal of Toxic Hg(II) from Liquid Effluents: Advances in the 2019 Year

Mercury is a toxic metal, thus, it is an element which has more and more restrictions in its uses, but despite the above, the removal of this metal, from whatever the form in which it is encountered (zero valent metal, inorganic, or organic compounds), and from different sources, is of a widespread interest. In the case of Hg(II), or Hg2+, the investigations about the treatment of Hg(II)-bearing liquid effluents (real or in most cases synthetic solutions) appear not to end, and from the various separation technologies, adsorption is the most popular among researchers. In this topic, and in the 2019 year, more than 100 publications had been devoted to this field: Hg(II)-removal-adsorption. This work examined all of them.