An amplified voltammetric sensor based on platinum nanoparticle/polyoxometalate/two-dimensional hexagonal boron nitride nanosheets composite and ionic liquid for determination of N-hydroxysuccinimide in water samples

Integration of Carboxylate Carbon Dot-Supported Gold Nanoparticles with Boron Nitride Nanosheets for Electrochemical Sensing of Prostate-Specific Antigen via Sandwich Immunoassays

An electrochemical sandwich immunoassay was fabricated to measure the prostate-specific antigen (PSA) biomarker. The PSA immunosensor was developed by altering the surface of a glassy carbon electrode (GCE) with a nanocomposite comprising carboxyl-functionalized carbon dots that support gold nanoparticles (AuNPs), which were then combined with hydroxylated boron nitride nanosheets (HO-BN). This construction possesses distinctive signal enhancement characteristics and was prepared via a facile method. Considering the high biological affinity of AuNPs for biomolecules, carbon dots (CDs) with carboxyl (COOH) groups make a suitable substrate for electrode modification. This alteration allows for the PSA antibody (Ab1) attachment, resulting in a sandwich-like configuration. Additionally, carbon dot-stabilized AuNPs integrated into HO-BN nanosheet nanocomposites considerably boost the electron transfer rate, leading to remarkable potential in sensor applications. By utilizing horseradish peroxidase (HRP)-conjugated antifree PSA antibody (Ab2), a reduction in hydrogen peroxide (H2O2) was achieved within the electrochemical cell. This reduction led to increased current, attributed to the increased PSA concentration, which is required for the biosensor analysis to perform properly. The developed immunosensor revealed a linear correlation with PSA concentrations ranging from 1.0 to 3500 pg mL-1, achieving a low detection limit of 0.136 pg mL-1. Furthermore, the PSA aptasensor demonstrates excellent selectivity, remarkable stability, and commendable reproducibility, indicating its significant potential for clinical research and diagnostic applications.

Hydrazine imprinted electrochemical sensor based on cobalt-barium stannate nanoparticles incorporated-functionalized MWCNTs nanocomposite for hydrazine determination in tap water samples

A hydrazine (HYD) detection method is presented based on molecularly imprinting polymers (MIPs) and cobalt-barium stannate nanoparticles incorporated-functionalized MWCNTs (CBSNPs/f-MWCNTs) nanocomposite. Firstly, co-precipitation and sonication techniques were applied to the preparations of CBSNPs and CBSNPs/f-MWCNTs nanocomposite, respectively. Since waste generation occurs at a minimum level in these techniques, an environmentally friendly nanocomposite was prepared. After the glassy carbon electrode modification with CBSNPs and CBSNPs/f-MWCNTs nanocomposite, HYD imprinted electrodes were fabricated using cyclic voltammetry (CV) with a dispersion containing 100.0 mM pyrrole (Py) monomer and 25.0 mM HYD molecule. The resulting electrochemical sensor demonstrated a detection span of 1.0 × 10-9 M to 1.0 × 10-8 M HYD and achieved a detection limit (LOD) of 3.0 × 10-10 M. Furthermore, the developed electrochemical sensor was used for actual tap water samples, and the obtained values close to 100.00% in recovery experiments showed the high accuracy of the developed sensor in real sample analysis. Finally, the selectivity, stability, and reproducibility of the created electrochemical sensor were investigated, and the developed sensor has been demonstrated to have high stability for at least 7 weeks, high reproducibility with a relative standard deviation (RSD) value of 0.14%, and high selectivity in real samples.

Determination of paclobutrazol using square wave voltammetry based on a molecularly imprinted polymer and boron-doped copper oxide/graphene nanocomposite

In the present study, a novel voltammetric sensor based on a boron-doped copper oxide/graphene (B-CuO-Gr) nanocomposite and molecularly imprinted polymer (MIP) was developed for the detection of paclobutrazol (PAC) in apple and orange juice samples. The B-CuO-Gr nanocomposite was prepared using sol-gel and calcination methods. After modifying glassy carbon electrodes with the B-CuO-Gr nanocomposite, PAC-imprinted electrodes were prepared in the presence of 100.0 mM pyrrole (Py) monomer and 25.0 mM PAC using cyclic voltammetry (CV). After elucidating the surface properties of the prepared B-CuO-Gr nanocomposite and PAC-imprinted electrodes using various characterization techniques, the PAC-imprinted sensor was successfully applied to apple and orange juice samples, demonstrating high recovery. A linear range of 1.0 × 10-9 to 1.0 × 10-8 M PAC (R2 = 0.9983) and a detection limit (LOD) of 3.30 × 10-10 M were observed, along with high selectivity, stability, and reproducibility for the MIP/B-CuO-Gr/GCE sensor.

Synthesis, modifications, and applications of iron-based nanoparticles

Magnetic nanoparticles (MNPs) are appealing materials as assistant to resolve environmental pollution issues and as recyclable catalysts for the oxidative degradation of resistant contaminants. Moreover, they can significantly influence the advancement of medical applications for imaging, diagnostics, medication administration, and biosensing. On the other hand, due to unique features, excellent biocompatibility, high curie temperatures and low cytotoxicity of the Iron-based nanoparticles, they have received increasing attention in recent years. Using an external magnetic field, in which the ferrite magnetic nanoparticles (FMNPs) in the reaction mixtures can be easily removed, make them more efficient approach than the conventional method for separating the catalyst particles by centrifugation or filtration. Ferrite magnetic nanoparticles (FMNPs) provide various advantages in food processing, environmental issues, pharmaceutical industry, sample preparation, wastewater management, water purification, illness therapy, identification of disease, tissue engineering, and biosensor creation for healthcare monitoring. Modification of FMNPs with the proper functional groups and surface modification techniques play a significant role in boosting their capability. Due to flexibility of FMNPs in functionalization and synthesis, it is possible to make customized FMNPs that can be utilized in variety of applications. This review focuses on synthesis, modifications, and applications of Iron-based nanoparticles.

Advances in polyoxometalate-based electrochemical sensors in the last three years

As a famous subclass of metal-oxide cluster materials, polyoxometalates (POMs) feature variable architectures, reversible multi-electron transport capability, catalytic activity, and redox capacity. These attributes endow POMs with great potential as promising electrode materials in electrochemical sensors (ECSs). Up to now, POM-based ECSs have been passionately studied, and diverse POM-based redox ECSs, aptasensors and immunosensors have emerged. And these POM-based ECSs generally demonstrate fast response, low detection limit, strong selectivity and high antijamming capability. This review mainly focuses on the remarkable advancement of POM-based ECSs in environmental monitoring, food safety and biomedicine from 2021, aiming to furnish theoretical insights that inform the design and development of innovative sensors.

Hydrogels for Chemical Sensing and Biosensing

The development and synthesis of hydrogels for chemical and biosensing are of great value. Hydrogels can be tailored to its own physical structure, chemical properties, biocompatibility, and sensitivity to external stimuli when being used in a specific environment. Herein, hydrogels and their applications in chemical and biosensing are mainly covered. In particular, it is focused on the manner in which hydrogels serve as sensing materials to a specific analyte. Different types of responsive hydrogels are hence introduced and summarized. Researchers can modify different chemical groups on the skeleton of the hydrogels, which make them as good chemical and biosensing materials. Hydrogels have great application potential for chemical and biosensing in the biomedical field and some emerging fields, such as wearable devices.

Anti-proliferative, Morphological and Molecular Docking Studies of New Thiophene Derivatives and their Strategy in Ionic Liquids Immobilized Reactions

BACKGROUND

A number of research were conducted on the pyran and thiophene derivatives, which were attributed to have a wide range of biological activities, including anti-plasmodial, as well as acting as caspase, hepatitis C and cancer inhibitors.

OBJECTIVE

The multicomponent reactions of the 5-acetyl-2-amino-4-(phenylamino)-thiophene-3-carbonitrile produced biologically active target molecules like pyran and their fused derivatives. Comparison between regular catalytic multi-component reactions and solvent-free ionic liquids immobilized multicomponent was studied.

METHODS

The multicomponent reactions in this work were carried out not only under the reflux conditions using triethylamine as a catalyst but also in solvent-free ionic liquids immobilized magnetic nanoparticles (MNPs) catalysts.

RESULTS

Through this work, thirty-one new compounds were synthesized and characterized and were evaluated toward the six cancer cell lines, namely A549, HT-29, MKN-45, U87MG, and SMMC-7721 and H460. The most active compounds were further screened toward seventeen cancer cell lines classified according to the disease. In addition, the effect of compound 11e on the A549 cell line was selected to make further morphological changes in the cell line. The Molecular docking studies of 11e and 11f were carried and promising results were obtained.

CONCLUSION

The synthesis of heterocyclic compounds derived from thiophene derivatives has been receiving significant attention. After a detailed optimizing study, it has been found that the solvent-free ionic liquids immobilized multi-component syntheses afforded a high yield of compounds, opening a greener procedure for this synthetically relevant transformation. Many of the synthesized compounds can be considered anticancer agents, enhancing further studies.

Quinone-amine polymer nanospheres with enhanced redox activity for aqueous proton storage

One of the biggest obstacles to the development of aqueous proton batteries (APBs), despite numerous optimization techniques, is the preparation and use of high-performance electrode materials. In this work, to improve the high solubility, limited capacity and poor cycle life of small organic molecules in APBs, homogeneous dispersed quinone-amine polymer nanospheres (PQANS) (average diameter: 220 nm) were synthesized by a polymerization reaction based on 3,3'-diaminobenzidine (DAB) and benzoquinone (BQ), making them suitable for proton storage in aqueous systems. As an anode for APBs, the obtained PQANS exhibits an improved reversible capacity of 126.2 mAh/g at 1 A/g after 300 cycles. The durable stable measurement of PQANS at 10 A/g was also conducted with a specific capacity of 66.8 mAh/g after 12,000 cycles. A series of in situ or ex situ measurements were used to establish the superior H+ storage mechanism of PQANS. A novel reaction mechanism of redox enhancement was revealed due to the existence of more carbonyl groups after the first cycle. Theoretical calculations were conducted to help illustrate the principle of binding protons with functional groups in PQANS. Finally, a PQANS anode-based aqueous proton full battery was constructed to demonstrate its potential application, which exhibits a specific capacity of 50.6 mAh/g at 1 A/g (600 cycles). This work provides a reference for preparing high-performance polymer-based electrode materials in aqueous batteries.

The MIL100(Fe)/BaTi0.85Zr0.15O3 nanocomposite with the photocatalytic capability for study of tetracycline photodegradation kinetics

The visible light-active nanocomposite with the photocatalytic capability was facile one-pot solvothermal method successfully synthesized. X-ray diffraction (XRD), Thermogravimetry and Derivative Thermogravimetry (TG-DTG), Scanning Electron Microscopy with Energy Dispersive X-ray Analysis (SEM-EDX), Diffuse Reflectance Spectroscopy (UV-Vis DRS), and Fourier Transform Infra-Red (FT-IR) analysis were employed to characterize the synthetized BaTi_0.85Zr_0.15O3, MIL-100(Fe), and the MIL-100(Fe)/BaTi_0.85Zr_0.15O₃ samples. As a result of the Scherrer equations, the size of grains for MIL-100(Fe), BaTi_0.85Zr_0.15O₃, and MIL-100(Fe)/BaTi_0.85Zr_0.15O₃ was estimated to be 40.81, 12.00, and 22.70 nm, respectively. MIL-100(Fe), BaTi_0.85Zr_0.15O₃, and MIL-100(Fe)/BaTi_0.85Zr_0.15O₃ samples showed bandgap values of 1.77, 3.02, and 2.56 determined from their absorption edge wavelengths. In the photodegraded solutions, chemical oxygen demand (COD) data and tetracycline (TC) absorbencies were used to obtain the rate constants of 0.032 min^-1 and 0.030 min^-1, respectively. This corresponds to t_1/2-values of 27.7 min and 21.7 min, respectively, for the degradation and mineralization of TC molecules during photodegradation process.

Application of the C-C3N4/Li2CoMn3O8//IL nanocomposite for design a sensitive electrochemical sensor inorder to detection of cetirizine, acetaminophen and phenylephrine in biological and pharmaceuticals samples

Due to the side effects of cetirizine overdose and the need to monitor its concentration in the human body, in this work, an electrochemical sensor has been prepared by utilizing a carbon paste electrode modified with Li₂CoMn₃O₈/CC₃N₄ nanocomposite and ethyl-3-methyl-imidazolium chloride ionic liquid ([EMIM][Cl]) to determine cetirizine in the human blood serum sample and urine as well as drug samples. Li₂CoMn₃O₈/CC₃N₄ nanocomposite was characterized by Fourier transform infrared (FT-IR), field emission scanning electron microscope (FESEM), and X-ray diffraction (XRD) analysis. The investigation of the influence of each modifier component showed that the existence of all components in modification has a synergistic effect. Li₂CoMn₃O₈/CC₃N₄/IL nanocomposite has a larger surface area relative to the components alone, thus providing a more fine-grained media to facilitate electron transfer during the reaction between analyte and electrode. Determination of cetirizine was performed in phosphate buffer solution with pH 7.0 and detection limits obtained in the concentration ranges of 0.03-0.9 and 3-300 μM was 11.8 × 10^-9 M. The diffusion coefficient (D = 9.2 × 10^-6 cm²s^-1) of cetirizine at the surface of the modified electrode was determined by chronoamperometry. Finally, simultaneous detection of cetirizine, phenylephrine and acetaminophen was performed using the suggested sensor without any interference.

An ultra-sensitive rifampicin electrochemical sensor based on Fe3O4 nanoparticles anchored Multiwalled Carbon nanotube modified glassy carbon electrode

This study aimed to guide future sensor studies against other pharmaceutical drugs by synthesizing Fe₃O₄NPs@MWCNT metallic nanoparticles (NPs). Side damage caused by excessive accumulation of tuberculosis drugs in the body can cause clots in the organs, and cause serious damage such as heart attack and respiratory failure, and threaten human life. Therefore, the development of sensors sensitive to various antibiotics in this study is important for human health. In this study, the sensitivity of Fe₃O₄ NPs to tuberculosis drug (rifampicin) was evaluated by catalytic reaction using bare/GCE, MWCNT/GCE, and Fe₃O₄NPs@MWCNT/GCE electrodes. First of all, Fe₃O₄ NPs were successfully synthesized for the study and MWCNT/GCE and Fe₃O₄ NPs@MWCNT/GCE electrodes were formed with the modification of the MWCNT support material. It was observed that the Fe₃O₄ NPs@MWCNT/GCE electrode gave the highest signal against the other electrodes. The morphological structure of Fe₃O₄ NPs was determined by various characterization techniques such as Transmission Electron Microscopy (TEM), Fourier Transmission Infrared Spectroscopy (FTIR), ultraviolet-visible (UV-Vis), and X-ray differential (XRD) and the obtained NPs were used for sensor studies, and it was observed that the current intensity increased as the scanning speed of each electrode increased in CV and DPV measurements. The average size of Fe₃O₄ NPs was found to be 7.32 ± 3.2 nm. Anodic current peaks occurred in the linear range of 2-25 μM. According to the results obtained from the measurements, the limit of detection (LOD) value was calculated as 0.64 μM limit of quantification (LOQ) 1.92 μM.

A review of graphene-based semiconductors for photocatalytic degradation of pollutants in wastewater

Water is the lifeblood of all living things; we often overlook the fact that the water cycle and the life cycle are inextricably linked. However, it has become contaminated as a result of industrialization, which has impacted the ecosystem by emitting numerous dyes, organic solvents, petroleum products, heavy metals, chemicals, diseases, and solid wastes. The absence of treatment in reusing wastewater is the root of the issues. Hence it is essential to treat the water to preserve the ecosystem and also for human health. In recent years, graphene-based photocatalysts are attracted much in the waste water treatment process due to their outstanding physical, chemical, and mechanical properties. Since in the graphene-based photocatalyst, graphene has exceptional electron conductivity, a broad range of light absorption, a large surface area, and a high adsorption capacity. When it is integrated into metals, metal-containing nanocomposites, semiconductor nanocomposites, polymers, MXene, and other compounds, it can greatly boost the photocatalytic activity towards the photo destruction of contaminants. Hence in this review, water pollution, methods of waste water treatment, fundamental principles of photocatalysis, the photocatalytic activity of other materials in wastewater treatment, and how the photocatalytic efficiency against the removal of organic dyes can be enhanced when coalesced with graphene are detailed.

The role of MOF based nanocomposites in the detection of phenolic compounds for environmental remediation- A review

Phenolic compounds would be the emerging pollutant by 2050, because of their wide spread applicability in daily life and therefore the adoption of suitable detection methods in which identification and separation of isomers is highly desirable. Owing to the fascinating features, Metal-organic framework (MOF), a class of reticular materials holds a large surface area with tunable shape and adjustable porosity will provide strong interaction with analytes through abundant functional groups resulting in high selectivity towards electrochemical determination of phenolic isomers. Nevertheless, the sensing performance can still be further improved by building MOF network (intrinsic resistance) with functional (conducting) materials, resulting in MOF based nanocomposite. Herein, this review provides the summary of MOF based nanocomposites for electrochemical sensing of phenolic compounds developed from 2015. In this review, we discussed the demerits of pristine MOF as electrode materials, and the requirement of new class of MOF with functional materials such as nanomaterials, carbon nanotubes, graphene and MXene. The history and evolution of MOF nanocomposite-based materials are discussed and also featured the impressive physical and chemical properties. Besides this review discusses the factors influencing the conducting pathway and mass transport of MOF based nanocomposite for enhanced sensing performance of phenolic compounds with suitable mechanistic illustrations. Finally, the major challenges governing the determination of phenolic compounds and the future advancements required for the development of MOF based electrodes for various applications are highlighted.

Magnetic nanoparticles based on cerium MOF supported on the MWCNT as a fluorescence quenching sensor for determination of 6-mercaptopurine

In this study, a new magnetic nanocomposite was developed as an efficient and fast-response fluorescence quenching sensor for determination of anticancer drug 6-mercaptopurine (6-MP). For this purpose, the needle-shape fluorescence metal-organic framework of cerium (Ce-MOF) were successfully synthesized on the surface of multiwalled carbon nanotubes using 1,3,5-benzenetricarboxylic acid ligand via a facile solvothermal assisted route and magnetized. The accuracy of the proposed synthesis was confirmed using the FT-IR, FE-SEM, XRD, and VSM methods. The obtained product as presented the fluorescence emission in 331 nm by excitation of 293 nm in excitation/emission slit widths of 10.0 nm. The operation of suggested method is based on quenching the fluorescence signal in accordance with increasing the 6-MP concentration. The proposed assay effectively detected the trace amount of 6-MP in the linear range of 1.0 × 10^-6 to 7 × 10^-5 M. The limit of detection and limit of quantification were obtained as 8.6 × 10^-7 and 2.86 × 10^-6 M, respectively. The analyte molecule was determined in real samples with satisfactory recoveries between 98.75 and 105.33.

Potentiometric Performance of Ion-Selective Electrodes Based on Polyaniline and Chelating Agents: Detection of Fe2+ or Fe3+ Ions

We constructed a sensor for the determination of Fe²⁺ and/or Fe³⁺ ions that consists of a polyaniline layer as an ion-to-electron transducer; on top of it, chelating molecules are deposited (which can selectively chelate specific ions) and protected with a non-biofouling poly(2-methyl-2-oxazoline)s layer. We have shown that our potentiometric sensing layers show a rapid response to the presence of Fe²⁺ or Fe³⁺ ions, do not experience interference with other ions (such as Cu²⁺), and work in a biological environment in the presence of bovine serum albumin (as a model serum protein). The sensing layers detect iron ions in the concentration range from 5 nM to 50 µM.

Polyoxometalate-based materials in extraction, and electrochemical and optical detection methods: A review

Polyoxometalates (POMs) as metal-oxide anions have exceptional properties like high negative charges, remarkable redox abilities, unique ligand properties and availability of organic grafting. Moreover, the amenability of POMs to modification with different materials makes them suitable as precursors to further obtain new composites. Due to their unique attributes, POMs and their composites have been utilized as adsorbents, electrodes and catalysts in extraction, and electrochemical and optical detection methods, respectively. A survey of the recent progress and developments of POM-based materials in these methods is therefore desirable, and should be of great interest. In this review article, POM-based materials, their properties as well as their identification methods, and analytical applications as adsorbents, electrodes and catalysts, and corresponding mechanisms of action, where relevant, are reviewed. Some current issues of the utilization of these materials and their future prospects in analytical chemistry are discussed.

Utilization of a double-cross-linked amino-functionalized three-dimensional graphene networks as a monolithic adsorbent for methyl orange removal: Equilibrium, kinetics, thermodynamics and artificial neural network modeling

Herein, it is aimed to develop a high-performance monolithic adsorbent to be utilized in methyl orange (MO) adsorption. Therefore, amino-functionalized three-dimensional graphene networks (3D-GN_f) fulfilling the requirements of reusability and high capacity have been fabricated via hydrothermal self-assembly approach followed by a double-crosslinking strategy. The potential utilization of 3D-GN_f as an adsorbent for removal MO has been assessed using both batch-adsorption studies and an artificial neural network (ANN) approach. Graphene oxide sheets have been amino-functionalized and cross-linked, by ethylenediamine (EDA) during hydrothermal treatment, following the glutaraldehyde has used as a double-crosslinking agent to facilitate the crosslinking of architecture. The successful fabrication of 3D-GN_f has been confirmed by field-emission scanning electron microscopy (FESEM), Fourier transform infrared (FT-IR), Raman and X-ray photoelectron spectroscopy (XPS). Moreover, N₂ adsorption/desorption isotherms have revealed the high specific surface area (1015 m² g^-1) with high pore volume (1.054 cm³ g^-1) and hierarchical porous structure of 3D-GN_f. The effect of initial concentration, contact time, and temperature on adsorption capacity have been thoroughly studied, and the kinetics, isotherms, and thermodynamics of MO adsorption have been modelled. The MO adsorption has been well defined by the pseudo-second-order kinetic model and Langmuir isotherm model with a monolayer adsorption capacity of 270.27 mg g^-1 at 25 °C. The thermodynamic findings have revealed MO adsorption has occurred spontaneously with an endothermic process. The Levenberg-Marquardt backpropagation algorithm has been implemented to train the ANN model, which has used the activation functions of tansig and purelin functions at the hidden and output layers, respectively. An optimum ANN model with high-performance metrics (coefficient of determination, R² = 0.9995; mean squared error, MSE = 0.0008) composed of three hidden layers with 5 neurons in each layer was constructed to forecast MO adsorption. The findings have shown that experimental results are consistent with ANN-based data, implying that the suggested ANN model may be used to forecast cationic dye adsorption.

Electrochemical sensors based on carbon nanostructures for the analysis of bisphenol A-A review

Overuse of Bisphenol A (BPA), a proven endocrine disruptor, has become a serious public health problem across the world. It has the potential to harm both the environment and human health, notably reproductive disorders, heart disease, and diabetes. Accordingly, much attention has been paid to the detection of BPA to promote food safety and environmental health. Carbon based nanostructures have proven themselves well in a variety of applications, such as energy storage, catalysis and sensors, due to their remarkable properties. Therefore, researchers have recently focused on fabricating electrochemical BPA sensors based on carbon nanostructures due to their unique advantages, such as real-time monitoring, simplicity, high selectivity, high sensitivity and easy operation. The purpose of the current review was to summarize the recent findings on carbon nanostructures for electrochemically sensing the BPA, as well as relevant future prospects and ongoing challenges.

Environmental protection based on the nanobiosensing of bacterial lipopolysaccharides (LPSs): material and method overview

Lipopolysaccharide (LPS) or endotoxin control is critical for environmental and healthcare issues. LPSs are responsible for several infections, including septic and shock sepsis, and are found in water samples. Accurate and specific diagnosis of endotoxin is one of the most challenging issues in medical bacteriology. Enzyme-linked immunosorbent assay (ELISA), plating and culture-based methods, and Limulus amebocyte lysate (LAL) assay are the conventional techniques in quantifying LPS in research and medical laboratories. However, these methods have been restricted due to their disadvantages, such as low sensitivity and time-consuming and complicated procedures. Therefore, the development of new and advanced methods is demanding, particularly in the biological and medical fields. Biosensor technology is an innovative method that developed extensively in the past decade. Biosensors are classified based on the type of transducer and bioreceptor. So in this review, various types of biosensors, such as optical (fluorescence, SERS, FRET, and SPR), electrochemical, photoelectrochemical, and electrochemiluminescence, on the biosensing of LPs were investigated. Also, the critical role of advanced nanomaterials on the performance of the above-mentioned biosensors is discussed. In addition, the application of different labels on the efficient usage of biosensors for LPS is surveyed comprehensively. Also, various bio-elements (aptamer, DNA, miRNA, peptide, enzyme, antibody, etc.) on the structure of the LPS biosensor are investigated. Finally, bio-analytical parameters that affect the performance of LPS biosensors are surveyed.

Polyoxometalate Functionalized Sensors: A Review

Polyoxometalates (POMs) are a class of metal oxide complexes with a large structural diversity. Effective control of the final chemical and physical properties of POMs could be provided by fine-tuning chemical modifications, such as the inclusion of other metals or non-metal ions. In addition, the nature and type of the counterion can also impact POM properties, like solubility. Besides, POMs may combine with carbon materials as graphene oxide, reduced graphene oxide or carbon nanotubes to enhance electronic conductivity, with noble metal nanoparticles to increase catalytic and functional sites, be introduced into metal-organic frameworks to increase surface area and expose more active sites, and embedded into conducting polymers. The possibility to design POMs to match properties adequate for specific sensing applications turns them into highly desirable chemicals for sensor sensitive layers. This review intends to provide an overview of POM structures used in sensors (electrochemical, optical, and piezoelectric), highlighting their main functional features. Furthermore, this review aims to summarize the reported applications of POMs in sensors for detecting and determining analytes in different matrices, many of them with biochemical and clinical relevance, along with analytical figures of merit and main virtues and problems of such devices. Special emphasis is given to the stability of POMs sensitive layers, detection limits, selectivity, the pH working range and throughput.

Recent advances in the highly sensitive determination of zearalenone residues in water and environmental resources with electrochemical biosensors

Zearalenone (ZEN), a significant class of mycotoxin which is considered as a xenoestrogen, permits, similar to natural estrogens, it's binding to the receptors of estrogen resulting in various reproductive diseases especially, hormonal misbalance. ZEN has toxic effects on human and animal health as a result of its teratogenicity, carcinogenicity, mutagenicity, nephrotoxicity, genotoxicity, and immunotoxicity. To ensure water and environmental resources safety, precise, rapid, sensitive, and reliable analytical and conventional methods can be progressed for the determination of toxins such as ZEN. Different selective nanomaterial-based compounds are used in conjunction with different analytical detection approaches to achieve this goal. The current review demonstrates the state-of-the-art advances of nanomaterial-based electrochemical sensing assays including various sensing, apta-sensing and, immunosensing studies to the highly sensitive determination of various ZEN families. At first, a concise study of the occurrence, structure, toxicity, legislations, and distribution of ZEN in monitoring has been performed. Then, different conventional and clinical techniques and procedures to sensitive and selective sensing techniques have been reviewed and the efficient comparison of them has been thoroughly discussed. This study has also summarized the salient features and the requirements for applying various sensing and biosensing platforms and diverse immobilization techniques in ZEN detection. Finally, we have defined the performance of several electrochemical sensors applying diverse recognition elements couples with nanomaterials fabricated using various recognition elements coupled with nanomaterials (metal NPs, metal oxide nanoparticles (NPs), graphene, and CNT) the issues limiting development, and the forthcoming tasks in successful construction with the applied nanomaterials.

Application of Solid-state Electrochemical Analysis in Ancient Ceramic Identification and Characterization: A Review

Background:

Ceramics can reflect ancient technology and art, therefore, it has a very important position in archaeology. However, it is far from enough just to study the shape of pottery and porcelain. It is necessary to use advanced scientific and technological means to conduct a comprehensive analysis of pottery and porcelain, so as to study the information hidden deep in the remains of ceramic objects.

Methods:

The solid voltammetric method can be used to obtain information about the composition of materials used in ancient ceramics. This new method can be applied to insoluble solids for example, providing qualitative and quantitative information and structural information with little soluble solids. The method requires only ng-μg sample.

Results:

In this review, we first describe the development of solid-state voltammetric method and our work in this field. Then, we describe in detail the application of this method in archaeology, especially in the analysis of ceramics. Finally, we describe the analytical applications of other electrochemical techniques for ceramics analysis.

Conclusion:

Due to the low demand for samples and the high-cost performance of analytical instruments, this method has been widely studied in Europe. To sum up, we propose to establish a microsampling method for ancient ceramics. A new method for the protection of fine ancient ceramics by the suitable carrier and the fixation on the surface of the electrode. These improvements can enable solid-state electroanalytical chemistry technology to achieve more comprehensive and accurate quantitative analysis of ancient ceramics particles. We also propose the current challenges and future directions of solid-state electroanalytical chemistry.

Determination of Salicylic Acid Using a Highly Sensitive and New Electroanalytical Sensor

Background:

A drug sensor (salicylic acid, in this case) was designed and made up of this research. The senor was made by modification of paste electrode (MPE) with CuO-SWCNTs and 1-hexyl-3-methylimidazolium chloride (HMICl). The MPE/CuO-SWCNTs/HMICl showed catalytic activity for the oxidation signal of salicylic acid in phosphate buffer solution.

Methods:

Electrochemical methods were used as a powerful strategy for the determination of salicylic acid in pharmaceutical samples. Aiming at this goal, carbon paste electrode was amplified with conductive materials and used as a working electrode.

Results:

The MPE/CuO-SWCNTs/HMICl was used for the determination of salicylic acid in the concentration range of 1.0 nM – 230 µM using differential pulse voltammetric (DPV) method. At pH=7.0, as optimum condition, the MPE/CuOSWCNTs/HMICl displayed a high-quality ability for the determination of salicylic acid in urine, pharmaceutical serum, and water samples.

Conclusion:

The MPE/CuO-SWCNTs/HMICl was successfully used as a new and high performance working electrode for the determination of salicylic acid at a nanomolar level and in real samples.

Properties and Recent Advantages of N,N’-dialkylimidazolium-ion Liquids Application in Electrochemistry

:

N,Nʹ-dialkylimidazolium-ion liquids is one of the important ionic liquids with a wide range of application as conductive electrolyte and in electrochemistry. The modified electrodes create a new view in fabrication of electroanalytical sensors. Many modifiers have beeen suggested for modification of electroanalytical sensor since many years ago. Over these years, ionic liquids and especially room temperature ionic liquids have attracted more attention due to their wide range of electrochemical windows and high electrical conductivity. N,Nʹ-dialkylimidazolium-ion liquids are one of the main important ionic liquids suggested for modification of bare electrodes and especially carbon paste electrodes. Although many review articles have reported onthe use of ionic liquids in electrochemical sensors, no review article has been specifically introduced so far on the review of the advantages of N,Nʹ-dialkylimidazolium ionic liquid. Therefore, in this review paper we focused on the introduction of recent advantages of N,Nʹ-dialkyl imidazolium ionic liquid in electrochemistry.

Fabrication of Electrochemical Sensor for Epinine Determination Amplified with MgO/CNTs Nanocomposite and Ionic Liquid

Background:

Catecholamines are a large group of pharmacological and biological compounds that are widely used in biological systems. These compounds are prepared both naturally and synthetically with many key roles in the human body and its activities. Therefore, many researchers focused on the identification and determination of catecholamines in biological samples.

Methods:

MgO/SWCNTs were synthesized through the chemical precipitation method. In addition, cyclic voltammetry, differential pulse voltammetry, and chronoamperometric methods were used for the electro-oxidation reaction study of epinine at the surface of the modified electrode.

Results:

Carbon paste electrode (CPE) modified with MgO/SWCNTs nanocomposite and 1-butyl- 3-methylimidazolium methanesulfonate (BMMS) was used as an electrochemical sensor for the determination of epinine. The results showed a linear dynamic range of 5.0 nM-250 μM with a detection limit of 0.1 nM for epinine determination using MgO/SWCNTs/BMMS/CPE as a sensor.

Conclusion:

In the present study, a highly sensitive electrochemical sensor was designed and fabricated as an analytical tool for the determination of epinine. MgO/SWCNTs/BMMS/CPE was successfully used for the determination of epinine in water and dextrose saline with an acceptable recovery range of 98.7%-102.72%.

Sorbent extraction behavior of cesium and strontium from nitric acid solutions using a new high thermal stability material

In this study a new low-cost carbonaceous material was prepared from husks of opuntia-ficus-indica as a starting material (precursor) which was accomplished by chemical activation route using H₃PO₄ impregnation. The material has been identified by different analytical tools. The sorption performance of Cs(I) and Sr(II) from HNO₃ solutions was examined through batch system. Variations of the distribution coefficients (K_d) as a function of HNO₃ concentration in the range 0.001-5.0 M were presented. Some of separation probabilities were suggested. The results attained signals that the Sr(II) selectivity is higher than that of Cs(I) at high molarities. The retention capacity (q_e) of Cs(I) and Sr(II) ions increased with growing temperature. The capacities at 0.001 M HNO₃ are 34 and 108 mg/g for Cs(I) and Sr(II), respectively. Whereas, at 2.0 M HNO₃ capacities were about 4 and 37 mg/g for each of Cs(I) and Sr (II), respectively. This studies demonstrates that the prepared carbonaceous sorbent is an economically effective sorbent for retention of Cs(I) and Sr(II) species from HNO₃ solutions. Cs(I) and Sr(II) removal potential was tested from simulated low- and intermediate-level radioactive waste samples.

Firstly Electrochemical Examination of Myosmine at Glassy Carbon Electrode: Sensitive Determination in Tobacco Leaves by Differential Pulse Voltammetry

In this study, the electrochemical properties of myosmine, one of the tobacco alkaloids, were investigated for the first time using cyclic voltammetry (CV) and differential pulse voltammetry (DPV) techniques on glassy carbon electrode (GCE). Using GCE with CV technique, it gave an irreversible reduction peak with diffusion control at about −1.38 V in Britton‐Robinson (BR, pH 12.0) medium. A good linear relationship between concentration and current in the range of 0.5 μM–3.5 μM in BR (pH 12.0) medium on GCE with DPV technique [Ip(μA)=0.847 C(μM)+0.114, r=0.995, n=7] has been observed. The proposed method has been successfully applied to tobacco leaves.

Visible light driven exotic p (CuO) - n (TiO2) heterojunction for the photodegradation of 4-chlorophenol and antibacterial activity

The treatment of industrial waste and harmful bacteria is an important topic due to the release of toxins from the industrial pollutants that damage the water resources. These harmful sources frighten the life of every organism which was later developed as the carcinogenic and mutagenic agents. Therefore, the current study focuses on the breakdown or degradation of 4-chlorophenol and the antibacterial activity against Escherichia coli (E. coli). As a well-known catalyst, pure titanium-di-oxide (TiO₂) had not shown the photocatalytic activity in the visible light region. Hence, band position of TiO₂ need to be shifted to bring out the absorption in the visible light region. For this purpose, the n-type TiO₂ nanocrystalline material's band gap got varied by adding different ratios of p-type CuO. The result had appeared in the formation of p (CuO) - n (TiO₂) junction synthesized from sol-gel followed by chemical precipitation methods. The optical band gap value was determined by Kubelka-Munk (K-M) plot through UV-Vis diffusive reflectance spectroscopy (DRS). Further, the comprehensive mechanism and the results of photocatalytic and antibacterial activities were discussed in detail. These investigations are made for tuning the TiO₂ catalyst towards improving or eliminating the existing various environmental damages.

Conductive Hydrogel-Based Electrochemical Sensor: A Soft Platform for Capturing Analyte

Electrode modifications for electrochemical sensors attract a lot of attention every year. Among them, hydrogels are a relatively special class of electrode modifier. Since hydrogels often contain polymers, even though they are conductive polymers, they are not ideal electrode modifiers because of their poor conductivity. However, the micro-aqueous environment and the three-dimensional structure of hydrogels are an excellent platform for immobilizing bioactive molecules and maintaining their activity. This gives the hydrogel-modified electrochemical sensor the potential to perform specific recognition. At the same time, the rapid development of nanomaterials also makes the composite hydrogel have good electrical conductivity. This has led many scientists to become interested in hydrogel-based electrochemical sensors. In this review, we summarize the development process of hydrogel-based electrochemical sensors, starting from 2000. Hydrogel-based electrochemical sensors were initially used only as a carrier for biomolecules, mostly for loading enzymes and for specific recognition. With the widespread use of noble metal nanoparticles and carbon materials, hydrogels can now be used to prepare enzyme-free sensors. Although there are some sporadic studies on the use of hydrogels for practical applications, the vast majority of reports are still limited to the detection of common model molecules, such as glucose and H2O2. In the review, we classify hydrogels according to their different conducting strategies, and present the current status of the application of different hydrogels in electrochemical sensors. We also summarize the advantages and shortcomings of hydrogel-based electrochemical sensors. In addition, future prospects regarding hydrogel for electrochemical sensor use have been provided at the end.

Effective water/wastewater treatment methodologies for toxic pollutants removal: Processes and applications towards sustainable development

Release of pollutants due to inflating anthropogenic activities has a conspicuous effect on the environment. As water is uniquely vulnerable to pollution, water pollution control has received a considerable attention among the most critical environmental challenges. Diverse sources such as heavy metals, dyes, pathogenic and organic compounds lead to deterioration in water quality. Demand for the pollutant free water has created a greater concern in water treatment technologies. The pollutants can be mitigated through physical, chemical and biological methodologies thereby alleviating the health and environmental effects caused. Diverse technologies for wastewater treatment with an accentuation on pre-treatment of feedstock and post treatment are concisely summed up. Pollutants present in the water can be removed by processes some of which include filtration, reverse osmosis, degasification, sedimentation, flocculation, precipitation and adsorption. Membrane separation and adsorption methodologies utilized to control water pollution and are found to be more effective than conventional methods and established recovery processes. This audit relatively features different methodologies that show remarkable power of eliminating pollutants from wastewater. This review describes recent research development on wastewater treatment and its respective benefits/applications in field scale were discussed. Finally, the difficulties in the enhancement of treatment methodologies for pragmatic commercial application are recognized and the future viewpoints are introduced.

Annealing temperature effect on cobalt ferrite nanoparticles for photocatalytic degradation

In this work, cobalt ferrite nanomaterials was prepared employing simple co-precipitation technique and annealed at 300, 400 and 600 °C. XRD study revealed the formation of cubic structure of CoFe₂O₄ nanoparticles and confirmed by high intense peak at 2θ value of 35.3°. The creation of ferrite phase was further confirmed by the studies such as FTIR, Raman and PL spectra. FTIR spectra confirmed the occurrence of Fe-O and Co-O metal oxygen vibrations and the lattice defects and oxygen vacancies of the CoFe₂O₄ nanoparticles were explored by PL spectra. No other signals were detected in Raman spectra, which explored pure spinal ferrites. The energy band gap values are obtained by using Tauc plot and the obtained band gap values for all the cobalt ferrite nanoparticles were 2.84, 2.75 and 2.89 eV respectively. The morphology of synthesized cobalt ferrite nanomaterials were observed from the SEM and TEM images. The product annealed at 400 °C showed the better morphology with least amount of agglomeration in comparison to other SEM images. In addition, SAED pattern of magnetic nanoparticles confirmed the existence of polycrystalline nature of the CoFe₂O₄ nanoparticles. The obtained surface area of CF2 sample was 5.082 m² g^-1 and pore volume and diameter of CF2 sample was found to be 0.013 cc/g and 3.937 nm respectively. Then, the product annealed at 400 °C exhibited most excellent activity and degraded 74% of cationic dye in 80 min, and it also exhibited excellent stability even maintain in three cycles.

CuO-ZnO-PANI a lethal p-n-p combination in degradation of 4-chlorophenol under visible light

Recent interest and responsibility to retain the water resources rose among people. Scientists have been engaged to develop the mechanism that involves the freely available sunlight - a sustainable resource - to remove the pollutants from water to make it again suitable for life. Ample research was reported in the removal of dye pollutants present in water. For this they have utilized p type and n type semiconductors or combination of both (p-n type) under the excitation of a wide range of electromagnetic band energy. Most of the interest lies in emerging out of the mechanism with hybrid semiconductors to remove the previously reported flaws. Toward this regard, this manuscript aims to develop unique material using the underlying p-n-p model for harnessing visible light in catalysis. Initially, p-n structure was developed with copper oxide (p-type) and zinc oxide (n-type), then polyaniline (p-type) conjugated at different concentrations (0.5 M, 0.7 M & 1.0 M), to yield p-n-p models, using precipitation followed by sonication techniques. Detailed physicochemical investigations were conducted on the resultant p-n-p material to elucidate its characteristics. Furthermore, the mechanism was advocated for the best photocatalytic activity under visible light excitation for the degradation of 4-chlorophenol and compared with the performance of a standard p-n (CuO/ZnO) combination.