The mineralization effect on chitosan hydrogel structure containing collagen and alkaline phosphatase

Hydro-Sensitive, In Situ Ultrafast Physical Self-Gelatinizing, and Red Blood Cells Strengthened Hemostatic Adhesive Powder with Antibiosis and Immunoregulation for Wound Repair

Immediate and effective hemostatic treatments for complex bleeding wounds are an urgent clinical demand. Hemostatic materials with characteristics of adhesion, sealing, anti-infection, and concrescence promotion have drawn growing concerns. However, pure natural multifunctional hemostatic materials with in situ ultrafast self-gelation are rarely reported. In this study, a hydro-sensitive collagen/tannic acid (ColTA) natural hemostatic powder is developed that can in situ self-gel to form adhesive by the non-covalent crosslinking between tannic acid (TA) and collagen (Col) in liquids. The physical interactions endow ColTA adhesive with the characteristics of instantaneous formation and high adhesion at various substrate surfaces. Crucially, ColTA powder adhesive shows an enhanced adhesion performance in the presence of blood due to the electrostatic interactions between ColTA adhesive and red blood cells, conducive to effective in situ sealing and rapid hemostasis. The biocompatible and hemocompatible ColTA adhesive can effectively control bleeding and seal the wounds of the caudal vein, liver, heart, and femoral arteries in rats. Furthermore, the low-cost and ready-to-use ColTA adhesive powder also possesses good antibacterial and inhibiting biofilm formation ability, and can efficiently regulate immune response by the NF-κB pathway to promote wound repair, making it a highly promising hemostatic material with great potential for biomedical applications.

Design of Recyclable Carboxylic Metal-Organic Framework/Chitosan Aerogels for Oil Bleaching

Novel hierarchical metal-organic framework/chitosan aerogel composites were developed for oil bleaching. UiO-66-COOH-type metal organic frameworks (Zr-MOFs) were synthesized and integrated onto a chitosan matrix with different contents and named MOF-aerogel-1 and MOF-aerogel-2. Due to the compatibility of chitosan, the carboxylic zirconium MOF-aerogels not only maintained the inherent chemical accessibility of UiO-66-COOH, but the unique crystallization and structural characteristics of these MOF nanoparticles were also preserved. Through 3-dimensional reconstructed images, aggregation of the UiO-66-COOH particles was observed in MOF-aerogel-1, while the MOF was homogeneously distributed on the surface of the chitosan lamellae in MOF-aerogel-2. All aerogels, with or without immobilized MOF nanoparticles, were capable of removing carotenoids during oil bleaching. MOF-aerogel-2 showed the most satisfying removal proportions of 26.6%, 36.5%, and 47.2% at 50 °C, 75 °C, and 100 °C, respectively, and its performance was very similar to that of commercial activated clay. The reuse performance of MOF-aerogel-2 was tested, and the results showed its exceptional sustainability for carotenoid removal. These findings suggested the effectiveness of the MOFaerogel for potential utilization in oil bleaching treatments.

Intravitreal Injectable Hydrogels for Sustained Drug Delivery in Glaucoma Treatment and Therapy

Glaucoma is extensively treated with topical eye drops containing drugs. However, the retention time of the loaded drugs and the in vivo bioavailability of the drugs are highly influenced before reaching the targeted area sufficiently, due to physiological and anatomical barriers of the eye, such as rapid nasolacrimal drainage. Poor intraocular penetration and frequent administration may also cause ocular cytotoxicity. A novel approach to overcome these drawbacks is the use of injectable hydrogels administered intravitreously for sustained drug delivery to the target site. These injectable hydrogels are used as nanocarriers to intimately interact with specific diseased ocular tissues to increase the therapeutic efficacy and drug bioavailability of the anti-glaucomic drugs. The human eye is very delicate, and is sensitive to contact with any foreign body material. However, natural biopolymers are non-reactive, biocompatible, biodegradable, and lack immunogenic and inflammatory responses to the host whenever they are incorporated in drug delivery systems. These favorable biomaterial properties have made them widely applicable in biomedical applications, with minimal adversity. This review highlights the importance of using natural biopolymer-based intravitreal hydrogel drug delivery systems for glaucoma treatment over conventional methods.

Design and evaluation of chitosan-amino acid thermosensitive hydrogel

Chitosan/glycerophosphate thermosensitive hydrogel crosslinked physically was a potential drug delivery carrier; however, long gelation time limits its application. Here, chitosan-amino acid (AA) thermosensitive hydrogels were prepared from chitosan (CS), αβ-glycerophosphate (GP), and l-lysine (Lys) or l-glutamic acid (Glu). The prepared CS-Lys/GP and CS-Glu/GP hydrogel showed good thermosensitivity and could form gels in a short time. The optimal parameters of CS-Lys/GP hydrogel were that the concentration of CS-Lys was 2.5%, the ratio of CS/Lys was 3.5/1.0, the ratio of CS-Lys/GP was 4.5/1.0. The optimal parameters of CS-Glu/GP hydrogel were that the concentration of CS-Glu was 3.0%, the ratio of CS/Glu was 2.0/1.0, and the ratio of CS-Glu/GP was 4.0/1.5. Chitosan-amino acid (CS-AA) thermosensitive hydrogel had a three-dimensional network structure. The addition of model drug tinidazole (TNZ) had no obvious effect on the structure of hydrogel. The results of infrared spectroscopy showed that there were hydrogen bonds between amino acids and chitosan. In vitro release results showed that CS-Lys/GP and CS-Glu/GP thermosensitive hydrogels had sustained release effects. Thus, the chitosan-amino acid thermosensitive hydrogels hold great potential as a sustained release drug delivery system.

Biomimetic Mineralization of Tannic Acid-Supplemented HEMA/SBMA Nanocomposite Hydrogels

This study developed a tannic acid (TA)-supplemented 2-hydroxyethyl methacrylate-co-sulfobetaine methacrylate (HEMA-co-SBMA) nanocomposite hydrogel with mineralization and antibacterial functions. Initially, hybrid hydrogels were synthesized by incorporating SBMA into the HEMA network and the influence of SBMA on the chemical structure, water content, mechanical properties, and antibacterial characteristics of the hybrid HEMA/SBMA hydrogels was examined. Then, nanoclay (Laponite XLG) was introduced into the hybrid HEMA/SBMA hydrogels and the effects evaluated of the nanoclay on the chemical structure, water content, and mechanical properties of these supplemented hydrogels. The 50/50 hybrid HEMA/SBMA hydrogel with 30 mg/mL nanoclay showed outstanding mechanical properties (3 MPa) and water content (60%) compared to pure polyHEMA hydrogels. TA then went on to be incorporated into these hybrid nanocomposite hydrogels and its effects investigated on biomimetic mineralization. Scanning electron microscopy (SEM) and energy-dispersive X-ray spectroscopy (EDX) showed that bone-like spheroidal precipitates with a Ca/P ratio of 1.67% were observed after 28 days within these mineralized hydrogels. These mineralized hydrogels demonstrated an almost 1.5-fold increase in compressive moduli compared to the hydrogels without mineralization. These multifunctional hydrogels display good mechanical and biomimetic properties and may have applications in bone regeneration therapies.

Preparation of ion-imprinted montmorillonite nanosheets/chitosan gel beads for selective recovery of Cu(Ⅱ) from wastewater

The novel ion-imprinted montmorillonite nanosheets/chitosan (IIMNC) gel beads were prepared for selective adsorption of Cu²⁺. The IIMNC gel beads were characterized by scanning electron microscope (SEM), Fourier transform infrared spectroscopy (FTIR), and X-ray photoelectron spectroscopy (XPS). The results showed that IIMNC was successfully assembled and rich in honeycombed pores, which performed well in the removal of Cu²⁺ through the synergistic effect of montmorillonite nanosheets and chitosan. The elimination of copper was followed by pseudo-second-order model and was enhanced by introduced montmorillonite nanosheets (MMTNS) because MMTNS attracted Cu(Ⅱ) by its negative charge and provided active adsorption sites through its high performance of cation exchange. This composite gel also showed excellent reusability, performing well in the removal of Cu²⁺ after undergoing adsorption-desorption in five cycles, because the adsorption sites of MMTNS can be continually reactivated by NaOH solution. More importantly, its high selectivity for Cu²⁺ provides a feasible way to recover Cu²⁺ from wastewater containing various cations.