Photocatalytic degradation of pesticide monocrotophos in water using W-TiO2 in slurry and fixed bed recirculating reactor

Photocatalytic Degradation of Carbofuran in Water Using Laser-Treated TiO2: Parameters Influence Study, Cyto- and Phytotoxicity Assessment

This study investigates the impact of changing parameters on the photocatalytic degradation of carbofuran (CBF) using laser-treated TiO2 nanotube arrays on a Ti mesh under simulated sunlight irradiation and assessing toxicity during photocatalytic degradation. Various parameters, including the stirring effect, light intensity, initial CBF concentration, and variation in the active surface area of laser-treated TiO2 photocatalysts, were examined to determine their impact on degradation efficiency. The photodegradation kinetics were monitored using ultra-performance liquid chromatography with a PDA detector (UPLC-PDA) and UV-Vis spectrophotometry, while mineralization was assessed by a total organic carbon (TOC) analyzer. The photocatalytic degradation of CBF is enhanced by an increase in the active surface area of the TiO2 photocatalyst, light intensity, and the introduction of stirring, but it decreases with an increase in the initial concentration of CBF. The toxicity assessments revealed that the cytotoxicity of CBF initially increased during the degradation process but decreased after further treatment, indicating the formation and subsequent breakdown of toxic intermediates. The phytotoxicity test showed that longer degradation times resulted in higher toxicity to plant growth. This study provides new insights into the photocatalytic degradation of CBF with TiO2, the importance of parameter optimization for more efficient treatment, and the use of toxicity tests to confirm the success of the photocatalytic process.

Studies on photocatalytic mineralization of organic pesticides by bimetallic Cu-Zn nanoparticles derived from Zingiber officinale Roscoe (ginger) using green chemistry approach

Compared to monometallic nanoparticles, bimetallic nanoparticle synthesis and characterization have attracted more attention due to their superior environmental protection properties. In this study, we discuss the preparation and characterization of Cu-Zn bimetallic nanoparticles using Zinger extract, as well as their potential role in photocatalytic degradation of carbendazim, chlorpyrifos, monocrotophos, and cypermethrin. Surface properties were assessed with SEM and TEM, while UV-VIS, XRD, FTIR, and fluorescence spectroscopy were used to characterize the materials. It was observed that higher pH conditions were more conducive to the development of stable Cu-Zn BMNPs with diameters ranging from 60 to 100 nm. UV-VIS spectroscopy showed that the Cu-Zn bimetallic nanoparticles photodegraded 53-95% of the pesticides, monocrotophos, chlorpyrifos, and carbendazim during the 24-72-h incubation period. A number of pesticides may be photocatalytically degraded by primary reactive radicals produced by nanoparticles. We propose that the use of bimetallic nanoparticles could be one alternative strategy for pesticide mineralization.

Recent updates on remediation approaches of environmentally occurring pollutants using visible light-active nano-photocatalysts

Photocatalysis emerges as a potential remedy for the issue of an unreliable light source. Recognized as the most dependable and potent energy source sustaining life on Earth, sunlight offers a promising solution. Sunlight is abundant and free, operational costs associated with running photocatalytic system using nanoparticles are often lower compared to system relying on artificial light source. The escalating problem of water pollution, particularly in highly industrialized nations, necessitates effective wastewater treatment methods. These methods aim to combat elevated pollution levels, encompassing pharmaceuticals, dyes, flame retardants, and pesticide components. Advanced oxidation processes within photocatalytic wastewater treatment exhibit substantial promise for removing complex organic pollutants. Doped nanomaterials, with their enhanced properties, enable efficient utilization of light. Coupled nanomaterials present significant potential in addressing both water and energy challenges by proficiently eliminating persistent pollutants from environment. Photocatalysis when exposed to sunlight can absorb photons and generate e- h + pairs. This discussion briefly outlines the wastewater treatment facilitated by interconnected nanomaterials, emphasizing their role in water-energy nexus. In exploring the capabilities of components within a functional photocatalyst, a comprehensive analysis of both simple photocatalysts and integrated photocatalytic systems is undertaken. Review aims to provide detailed explanation of the impact of light source on photon generation and significance of solar light on reaction kinetics, considering various parameters such as catalyst dosage, pH, temperature, and types of oxidants. By shedding light on these aspects, this review seeks to enhance our understanding of intricate processes involved in photocatalysis and its potential applications in addressing contemporary environmental challenges.

Advancements in TiO2-based photocatalysis for environmental remediation: Strategies for enhancing visible-light-driven activity

Researchers have focused on efficient techniques for degrading hazardous organic pollutants due to their negative impacts on ecological systems, necessitating immediate remediation. Specifically, TiO2-based photocatalysts, a wide-bandgap semiconductor material, have been extensively studied for their application in environmental remediation. However, the extensive band gap energy and speedy reattachment of electron (e-) and hole (h+) pairs in bare TiO2 are considered major disadvantages for photocatalysis. This review extensively focuses on the combination of semiconducting photocatalysts for commercial outcomes to develop efficient heterojunctions with high photocatalytic activity by minimizing the e-/h+ recombination rate. The improved activity of these heterojunctions is due to their greater surface area, rich active sites, narrow band gap, and high light-harvesting tendency. In this context, strategies for increasing visible light activity, including doping with metals and non-metals, surface modifications, morphology control, composite formation, heterojunction formation, bandgap engineering, surface plasmon resonance, and optimizing reaction conditions are discussed. Furthermore, this review critically assesses the latest developments in TiO2 photocatalysts for the efficient decomposition of various organic contaminants from wastewater, such as pharmaceutical waste, dyes, pesticides, aromatic hydrocarbons, and halo compounds. This review implies that doping is an effective, economical, and simple process for TiO2 nanostructures and that a heterogeneous photocatalytic mechanism is an eco-friendly substitute for the removal of various pollutants. This review provides valuable insights for researchers involved in the development of efficient photocatalysts for environmental remediation.

A Brief Review of Photocatalytic Reactors Used for Persistent Pesticides Degradation

Pesticide pollution is a major issue, given their intensive use in the 20th century, which led to their accumulation in the environment. At the international level, strict regulations are imposed on the use of pesticides, simultaneously with the increasing interest of researchers from all over the world to find methods of neutralizing them. Photocatalytic degradation is an intensively studied method to be applied for the degradation of pesticides, especially through the use of solar energy. The mechanisms of photocatalysis are studied and implemented in pilot and semi-pilot installations on experimental platforms, in order to be able to make this method more efficient and to identify the equipment that can achieve the photodegradation of pesticides with the highest possible yields. This paper proposes a brief review of the impact of pesticides on the environment and some techniques for their degradation, with the main emphasis on different photoreactor configurations, using slurry or immobilized photocatalysts. This review highlights the efforts of researchers to harmonize the main elements of photocatalysis: choice of the photocatalyst, and the way of photocatalyst integration within photoreaction configuration, in order to make the transfer of momentum, mass, and energy as efficient as possible for optimal excitation of the photocatalyst.