Single step natural poly(tannic acid) particle preparation as multitalented biomaterial

Use of carboxymethyl cellulose as binder for the production of water-soluble catalysts

Bio-based polymers are materials of high interest given the harmful environmental impact that involves the use of non-biodegradable fossil products for industrial applications. These materials are also particularly interesting as bio-based ligands for the preparation of metal nanoparticles (MNPs), employed as catalysts for the synthesis of high value chemicals. In the present study, Ru (0) and Rh(0) Metal Nanoparticles supported on Sodium Carboxymethyl cellulose (MNP(0)s-CMCNa) were prepared by simply mixing RhCl3x3H2O or RuCl3 with an aqueous solution of CMCNa, followed by NaBH4 reduction. The formation of MNP(0)s-CMCNa was confirmed by FT-IR and XRD, and their size estimated to be around 1.5 and 2.2 nm by TEM analysis. MNP(0)s-CMCNa were employed for the hydrogenation of (E)-cinnamic aldehyde, furfural and levulinic acid. Hydrogenation experiments revealed that CMCNa is an excellent ligand for the stabilization of Rh(0) and Ru(0) nanoparticles allowing to obtain high conversions (>90 %) and selectivities (>98 %) with all substrates tested. Easy recovery by liquid/liquid extraction allowed to separate the catalyst from the reaction products, and recycling experiments demonstrated that MNPs-CS were highly efficiency up to three times in best hydrogenation conditions.

Seconds Timescale Synthesis of Highly Stretchable Antibacterial Hydrogel for Skin Wound Closure and Epidermal Strain Sensor

Effective wound healing is critical for patient care, and the development of novel wound dressing materials that promote healing, prevent infection, and are user-friendly is of great importance, particularly in the context of point-of-care testing (POCT). This study reports the synthesis of a hydrogel material that can be produced in less than 10 s and possesses antibacterial activity against both gram-negative and gram-positive microorganisms, as well as the ability to inhibit the growth of eukaryotic cells, such as yeast. The hydrogel is formed wholly based on covalent-like hydrogen bonding interactions and exhibits excellent mechanical properties, with the ability to stretch up to more than 600% of its initial length. Furthermore, the hydrogel demonstrates ultra-fast self-healing properties, with fractures capable of being repaired within 10 s. This hydrogel can promote skin wound healing, with the added advantage of functioning as a strain sensor that generates an electrical signal in response to physical deformation. The strain sensor composed of a rubber shell realizes fast and responsive strain sensing. The findings suggest that this hydrogel has promising applications in the field of POCT for wound care, providing a new avenue for improved patient outcomes.

Progress on green crosslinking of polysaccharide hydrogels for drug delivery and tissue engineering applications

Natural polysaccharides are being studied for their biocompatibility, biodegradability, low toxicity, and low cost in the fabrication of various hydrogel devices. However, due to their insufficient physicochemical and mechanical qualities, polysaccharide hydrogels alone are not acceptable for biological applications. Various synthetic crosslinkers have been tested to overcome the drawbacks of standalone polysaccharide hydrogels; however, the presence of toxic residual crosslinkers, the generation of toxic by-products following biodegradation, and the requirement of toxic organic solvents for processing pose challenges in achieving the desired non-toxic biomaterials. Natural crosslinkers such as citric acid, tannic acid, vanillin, gallic acid, ferulic acid, proanthocyanidins, phytic acid, squaric acid, and epigallocatechin have been used to generate polysaccharide-based hydrogels in recent years. Various polysaccharides, including cellulose, alginate, pectin, hyaluronic acid, and chitosan, have been hydrogelized and investigated for their potential in drug delivery and tissue engineering applications using natural crosslinkers. We attempted to provide an overview of the synthesis of polysaccharide-based hydrogel systems (films, complex nanoparticles, microspheres, and porous scaffolds) based on green crosslinkers, as well as a description of the mechanism of crosslinking and properties with a special emphasis on drug delivery, and tissue engineering applications.

Recent progress in tannic acid based approaches as a natural polyphenolic biomaterial for cancer therapy: A review

Significant advancements have been noticed in cancer therapy for decades. Despite this, there are still many critical challenges ahead, including multidrug resistance, drug instability, and side effects. To overcome obstacles of these problems, various types of materials in biomedical research have been explored. Chief among them, the applications of natural compounds have grown rapidly due to their superb biological activities. Natural compounds, especially polyphenolic compounds, play a positive and great role in cancer therapy. Tannic acid (TA), one of the most famous polyphenols, has attracted widespread attention in the field of cancer treatment with unique structural, physicochemical, pharmaceutical, anticancer, antiviral, antioxidant and other strong biological features. This review concentrated on the basic structure along with the important role of TA in tuning oncological signal pathways firstly, and then focused on the use of TA in chemotherapy and preparation of delivery systems including nanoparticles and hydrogels for cancer therapy. Besides, the application of TA/Fe3+ complex coating in photothermal therapy, chemodynamic therapy, combined therapy and theranostics is discussed.

Nanoassemblies from the aqueous extract of roasted coffee beans modulate the behavioral and molecular effects of smoking withdrawal-induced anxiety in female rats

Antioxidant-rich plant extracts have demonstrated tremendous value as inflammatory modulators and as nanomaterial precursors. Chronic cigarette smoking alters neurotransmitter systems, particularly the glutamatergic system, and produces neuroinflammation. This study aimed to investigate the behavioral and molecular correlates of cigarette smoking withdrawal-induced anxiety-like behavior in rats, and whether these effects could be mitigated by the administration of antioxidant nanoassemblies prepared by spontaneous oxidation of dark-roasted Arabica coffee bean aqueous extracts. Four experimental groups of female Sprague-Dawley rats were randomly assigned to: (i) a control group that was only exposed to room air, (ii) a COF group that was administered 20 mg/kg of the coffee nanoassemblies by oral gavage, (iii) a SMOK group that was exposed to cigarette smoke and was given an oral gavage of distilled water, (iv) and a SMOK + COF group that was exposed to cigarette smoke and administered 20 mg/kg of the coffee nanoassemblies. Animals were exposed to cigarette smoke for 2 h per day, five days per week, with a 2-day withdrawal period each week. At the end of the 4th week, rats began receiving either distilled water or the coffee nanoassemblies before being exposed to cigarette smoke for 21 additional days. Weekly behavioral tests revealed that cigarette smoking withdrawal exacerbated anxiety, while the administration of the coffee nanoassemblies reduced this effect. The effect of cigarette smoking on astroglial glutamate transporters and nuclear factor kappa B (NF-κB) expression in brain subregions was also measured. Smoking reduced the relative mRNA and protein levels of the glutamate transporter 1 (GLT-1) and the cystine/glutamate antiporter (xCT), and increased the levels of NF-κB, but these effects were attenuated by the coffee nanoassemblies. Thus, administration of the antioxidant nanoassemblies decreased the negative effects of cigarette smoke, which included neuroinflammation, changes in glutamate transporters' expression, and a rise in anxiety-like behavior.

Extraction, characterization of polyphenols from certain medicinal plants and evaluation of their antioxidant, antitumor, antidiabetic, antimicrobial properties, and potential use in human nutrition

Introduction

Dietary medicinal plants are among the most sought-after topics in alternative medicine today due to their preventive and healing properties against many diseases.

Aim

This study aimed to extract and determine the polyphenols from indigenous plants extracts, i.e., Mentha longifolia, M. arvensis, Tinospora cordifolia, Cymbopogon citratus, Foeniculum vulgare, Cassia absus, Camellia sinensis, Trachyspermum ammi, C. sinensis and M. arvensis, then evaluate the antioxidant, cytotoxicity, and antimicrobial properties, besides enzyme inhibition of isolated polyphenols.

Methods

The antioxidant activity was evaluated by DPPH, Superoxide radical, Hydroxyl radical (OH.), and Nitric oxide (NO.) scavenging activity; the antidiabetic activity was evaluated by enzymatic methods, and anticancer activity using MTT assay, while the antibacterial activity.

Results

The results showed that tested medicinal plants' polyphenolic extracts (MPPE) exhibited the most significant antioxidant activity in DPPH, hydroxyl, nitric oxide, and superoxide radical scavenging methods because of the considerable amounts of total polyphenol and flavonoid contents. UHPLC profile showed twenty-five polyphenol complexes in eight medicinal plant extracts, categorized into phenolic acids, flavonoids, and alkaloids. The main polyphenol was 3-Feroylquinic acid (1,302 mg/L), also found in M. longifolia, C. absus, and C. sinensis, has a higher phenolic content, i.e., rosmarinic acid, vanillic acid, chlorogenic acid, p-coumaric acid, ferulic acid, gallic acid, catechin, luteolin, 7-O-neohesperideside, quercetin 3,7-O-glucoside, hesperidin, rutin, quercetin, and caffeine in the range of (560-780 mg/L). At the same time, other compounds are of medium content (99-312 mg/L). The phenolics in C. sinensis were 20-116% more abundant than those in M. longifolia, C. absus, and other medicinal plants. While T. cordifolia is rich in alkaloids, T. ammi has a lower content. The MTT assay against Caco-2 cells showed that polyphenolic extracts of T. ammi and C. citratus had maximum cytotoxicity. While M. arvensis, C. sinensis, and F. vulgare extracts showed significant enzyme inhibition activity, C. sinensis showed minor inhibition activity against α-amylase. Furthermore, F. vulgare and C. sinensis polyphenolic extracts showed considerable antibacterial activity against S. aureus, B. cereus, E. coli, and S. enterica.

Discussion

The principal component analysis demonstrated clear separation among medicinal plants' extracts based on their functional properties. These findings prove the therapeutic effectiveness of indigenous plants and highlight their importance as natural reserves of phytogenic compounds with untapped potential that needs to be discovered through advanced analytical methods.

Amphotericin B-Loaded Plant-Inspired Polyphenol Nanoparticles Enhance Its Antifungal Activity and Biocompatibility

Amphotericin B (AmB) is one of the first-line treatments for systemic fungal infections, yet it suffers from dose-limiting systemic toxicity and high cost of less toxic lipid-based formulations. Here, we report on a facile approach to synthesize an AmB-loaded nanomedicine by leveraging plant-inspired oxidative self-polymerization of the ubiquitous polyphenol quercetin (QCT). Polymerized QCT nanoparticles (pQCT NPs) were formed, loaded with AmB, and functionalized with poly(ethylene glycol) (PEG) to impart steric stability in a simple procedure that relied on mixing followed by dialysis. The AmB-loaded NPs (AmB@pQCT-PEG NPs) were characterized by a drug loading efficiency of more than 90%, a particle size of around 160 nm, a polydispersity index of 0.07, and a partially negative surface charge. AmB release from the NPs was sustained over several days and followed the Korsmeyer-Peppas model with a release exponent (n) value >0.85, denoting drug release by polymer relaxation and swelling. A hemolysis assay revealed the NPs to be highly biocompatible, with negligible hemolytic activity and 30-60% hemolysis after 1 and 24 h of incubation with erythrocytes, respectively, across a wide concentration range (6.25-100.00 μg/mL). Conversely, equivalent concentrations of free AmB caused 90-100% hemolysis within the same timeframe. Importantly, AmB@pQCT-PEG NPs outperformed free AmB in microbial susceptibility assays on Candida albicans, achieving a minimum inhibitory concentration of 62.5 ng/mL after 48 h of incubation, which was 2-fold lower than the free drug. Our results demonstrate that pQCT NPs may serve as a viable AmB delivery platform for the treatment of fungal infections and potentially other AmB-susceptible pathogens.

High-Axial-Aspect Tannic Acid Microparticles Facilitate Gelation and Injectability of Collagen-Based Hydrogels

Injectable collagen-based hydrogels offer great promise for tissue engineering and regeneration, but their use is limited by poor mechanical strength. Herein, we incorporate tannic acid (TA) to tailor the rheology of the corresponding hydrogels while simultaneously adding the therapeutic benefits inherent to this polyphenolic component. TA in the solution form and needle-shaped TA microparticles are combined with collagen and the respective systems studied for their time-dependent sol-gel transitions (from storage to body temperatures, 4-37 °C) as a function of TA concentration. Compared to systems incorporating TA microparticles, those with dissolved TA, applied at a similar concentration, generate a less significant enhancement of the elastic modulus. Premature gelation at a low temperature and associated colloidal arrest of the system are proposed as a main factor explaining this limited performance. A higher yield stress (elastic stress method) is determined for systems loaded with TA microparticles compared to the system with dissolved TA. These results are interpreted in terms of the underlying interactions of TA with collagen, as probed by spectroscopy and isothermal titration calorimetry. Importantly, hydrogels containing TA microparticles show high cell viability (human dermal fibroblasts) and comparative cellular activity relative to the collagen-only hydrogel. Overall, composite hydrogels incorporating TA microparticles demonstrate a new, simple, and better-performance alternative to cell culturing and difficult implantation scenarios.

Tannic acid: a versatile polyphenol for design of biomedical hydrogels

Tannic acid (TA), a natural polyphenol, is a hydrolysable amphiphilic tannin derivative of gallic acid with several galloyl groups in its structure. Tannic acid interacts with various organic, inorganic, hydrophilic, and hydrophobic materials such as proteins and polysaccharides via hydrogen bonding, electrostatic, coordinative bonding, and hydrophobic interactions. Tannic acid has been studied for various biomedical applications as a natural crosslinker with anti-inflammatory, antibacterial, and anticancer activities. In this review, we focus on TA-based hydrogels for biomaterials engineering to help biomaterials scientists and engineers better realize TA's potential in the design and fabrication of novel hydrogel biomaterials. The interactions of TA with various natural or synthetic compounds are deliberated, discussing parameters that affect TA-material interactions thus providing a fundamental set of criteria for utilizing TA in hydrogels for tissue healing and regeneration. The review also discusses the merits and demerits of using TA in developing hydrogels either through direct incorporation in the hydrogel formulation or indirectly via immersing the final product in a TA solution. In general, TA is a natural bioactive molecule with diverse potential for engineering biomedical hydrogels.

A novel and highly efficient Zr-containing catalyst supported by biomass-derived sodium carboxymethyl cellulose for hydrogenation of furfural

Functional use of biomass based on its structural properties is an efficient approach for the valuable utilization of biomass resources. In this work, carboxymethyl cellulose zirconium-based catalyst (Zr-CMC) was constructed by the coordination between the carboxylic groups in sodium carboxymethyl cellulose (CMC-Na) with transition metal Zr4+. The prepared catalyst was applied into the synthesis of furfuryl alcohol (FAL) by catalytic transfer hydrogenation of biomass-derived furfural (FF) using isopropanol as hydrogen donor. Both the preparation conditions and the reaction conditions of Zr-CMC catalyst were investigated and optimized. The results showed that Zr-CMC was efficient for the reaction with the FF conversion, FAL yield and selectivity reaching to 92.5%, 91.5 %, and 99.0%, respectively, under the mild conditions (90°C). Meanwhile, the Zr-CMC catalyst could be reused at least for five times without obvious decrease in efficiency, indicating the catalyst had excellent stability. With the advantages of sustainable raw materials, high efficiency, and excellent stability, the prepared catalyst is potential for application in the field of biomass conversion.

Biomedical applications of tannic acid

Tannic Acid (TA) is a naturally occurring antioxidant polyphenol that has gained popularity over the past decade in the field of biomedical research for its unique biochemical properties. Tannic acid, typically extracted from oak tree galls, has been used in many important historical applications. TA is a key component in vegetable tanning of leather, iron gall ink, red wines, and as a traditional medicine to treat a variety of maladies. The basis of TA utility is derived from its many hydroxyl groups and its affinity for forming hydrogen bonds with proteins and other biomolecules. Today, the study of TA has led to the development of many new pharmaceutical and biomedical applications. TA has been shown to reduce inflammation as an antioxidant, act as an antibiotic in common pathogenic bacterium, and induce apoptosis in several cancer types. TA has also displayed antiviral and antifungal activity. At certain concentrations, TA can be used to treat gastrointestinal disorders such as hemorrhoids and diarrhea, severe burns, and protect against neurodegenerative diseases. TA has also been utilized in biomaterials research as a natural crosslinking agent to improve mechanical properties of natural and synthetic hydrogels and polymers, while also imparting anti-inflammatory, antibacterial, and anticancer activity to the materials. TA has also been used to develop thin film coatings and nanoparticles for drug delivery. In all, TA is fascinating molecule with a wide variety of potential uses in pharmaceuticals, biomaterials applications, and drug delivery strategies.

Curcumin-tannic acid-poloxamer nanoassemblies enhance curcumin's uptake and bioactivity against cancer cells in vitro

Curcumin (CUR) is a bioactive natural compound with potent antioxidant and anticancer properties. However, its poor water solubility has been a major limitation against its widespread clinical use. The aim of this study was to develop a nanoscale formulation for CUR to improve its solubility and potentially enhance its bioactivity, by leveraging the self-assembly behavior of tannic acid (TA) and amphiphilic poloxamers to form CUR-entrapped nanoassemblies. To optimize drug loading, formulation variables included the CUR: TA ratio and the type of amphiphilic polymer (Pluronic® F-127 or Pluronic® P-123). The optimal CUR nanoparticles (NPs) were around 200 nm in size with a high degree of monodispersity and 56% entrapment efficiency. Infrared spectroscopy confirmed the presence of intermolecular interactions between CUR and the NP formulation components. X-ray diffraction revealed that CUR was entrapped in the NPs in an amorphous state. The NPs maintained excellent colloidal stability under various conditions. In vitro release of CUR from the NPs showed a biphasic controlled release pattern up to 72 h. Antioxidant and antiproliferative assays against a panel of human cancer cell lines revealed significantly higher activity for CUR NPs compared to free CUR, particularly in MCF-7 and MDA-MB-231 breast cancer cells. This was attributed to greater cellular uptake of the NPs compared to the free drug as verified by confocal microscopy imaging and flow cytometry measurements. Our findings present a highly promising NP delivery platform for CUR prepared via a simple self-assembly process with the ability to potentiate its bioactivity in cancer and other diseases where oxidative stress is implicated.

Highly Structured 3D Electrospun Conical Scaffold: A Tool for Dental Pulp Regeneration

New procedures envisioned for dental pulp regeneration after pulpectomy include cell homing strategy. It involves host endogenous stem cell recruitment and activation. To meet this cell-free approach, we need to design a relevant scaffold to support cell migration from tissues surrounding the dental root canal. A composite membrane made of electrospun poly(lactic acid) nanofibers and electrosprayed polycaprolactone with tannic acid (TA) microparticles which mimics the architecture of the extracellular matrix was first fabricated. After rolling the membrane in the form of a 3D conical scaffold and subsequently coating it with gelatin, it can be directly inserted into the root canal. The porous morphology of the construct was characterized by SEM at different length scales. It was shown that TA was released from the 3D conical scaffold after 2 days in PBS at 37 °C. Biocompatibility studies were first assessed by seeding human dental pulp stem cells (DPSCs) on planar membranes coated or not coated with gelatin to compare the surfaces. After 24 h, the results highlighted that the gelatin-coating increased the membrane biocompatibility and cell viability. Similar DPSC morphology and proliferation on both membrane surfaces were observed. The culture of DPSCs on conical scaffolds showed cell colonization in the whole cone volume, proving that the architecture of the conical scaffold was suitable for cell migration.

The beauty of biocatalysis: sustainable synthesis of ingredients in cosmetics

Covering: 2015 up to July 2021The market for cosmetics is consumer driven and the desire for green, sustainable and natural ingredients is increasing. The use of isolated enzymes and whole-cell organisms to synthesise these products is congruent with these values, especially when combined with the use of renewable, recyclable or waste feedstocks. The literature of biocatalysis for the synthesis of ingredients in cosmetics in the past five years is herein reviewed.

Dual antioxidant-photosensitizing hydrogel system: Cross-linking of chitosan with tannic acid for enhanced photodynamic efficacy

Herein, a new antioxidant-photosensitizing hydrogel based on chitosan has been developed to control photodynamic therapy (PDT) activity in cancer treatment. In PDT, photosensitizers generate reactive oxygen species (ROS) during photochemical reactions, leading oxidative damage to cancer cells. However, high ROS levels are lethal to non-target healthy cells and tissues such as endothelial cells and blood cells. To mediate these drawbacks, we improved PDT with a natural polyphenolic antioxidant, Tannic acid (TA), to control the ROS level and minimize side effects through singlet oxygen (¹O₂) scavenging. In this work, chitosan-based hydrogels were designed using tannic acid as an antioxidant cross-linker and loaded with water-soluble N, N'-di-(l-alanine)-3,4,9,10-perylene tetracarboxylic diimide (PDI-Ala) as a photosensitizer. Our results showed that the hydrogel formed a three-dimensional (3D) microstructure with good mechanical strength and significant singlet oxygen production and antioxidant activity. In addition, the behavior of human melanoma cell line A375 and dental pulp stem cells (as normal cells) was compared and studied during an in vitro photodynamic treatment. Normal cells had a higher viability than cancer cells, indicating that the PDT is more effective on cancer cells than on normal cells. The new hydrogels could be applied as an effective new drug to control PDT performance.

Dual role of tannic acid and pyrogallol incorporated in plaster of Paris: Morphology modification and release for antimicrobial properties

The design of bioactive plasters is of major interest for the amelioration of dental and bone cements. In this article, a one pot and environmentally friendly strategy based on the addition of a cheap polyphenol-tannic acid (TA) or the main phenolic constituent of TA, namely pyrogallol (PY)- able to interact with calcium sulfate is proposed. Tannic acid and pyrogallol not only modify the morphology of the obtained plaster+TA/PY composites but a part of it is released and provides strong-up to twenty fold- antibacterial effect against Staphylococcus aureus. It is shown that the higher antibacterial efficiency of PY is related to a greater release compared to TA even if in solution the antibacterial effect of PY is lower than that of TA when reported on the basis of the molar concentration in PY units.

Elkasabgy N, Shao P, A. Farag M. Recent Advances in Tannic Acid (Gallotannin) Anticancer Activities and Drug Delivery Systems for Efficacy Improvement; A Comprehensive Review

Tannic acid is a chief gallo-tannin belonging to the hydrolysable tannins extracted from gall nuts and other plant sources. A myriad of pharmaceutical and biological applications in the medical field has been well recognized to tannic acid. Among these effects, potential anticancer activities against several solid malignancies such as liver, breast, lung, pancreatic, colorectal and ovarian cancers have been reported. Tannic acid was found to play a maestro-role in tuning several oncological signaling pathways including JAK/STAT, RAS/RAF/mTOR, TGF-β1/TGF-β1R axis, VEGF/VEGFR and CXCL12/CXCR4 axes. The combinational beneficial effects of tannic acid with other conventional chemotherapeutic drugs have been clearly demonstrated in literature such as a synergistic anticancer effect and enhancement of the chemo-sensitivity in several resistant cases. Yet, clinical applications of tannic acid have been limited owing to its poor lipid solubility, low bioavailability, off-taste, and short half-life. To overcome such obstacles, novel drug delivery systems have been employed to deliver tannic acid with the aim of improving its applications and/or efficacy against cancer cells. Among these drug delivery systems are several types of organic and metallic nanoparticles. In this review, the authors focus on the molecular mechanisms of tannic acid in tuning several neoplastic diseases as well as novel drug delivery systems that can be used for its clinical applications with an attempt to provide a systemic reference to promote the development of tannic acid as a cheap drug and/or drug delivery system in cancer management.

Copper Tannic Acid-Coordinated Metal-Organic Nanosheets for Synergistic Antimicrobial and Antifouling Coatings

The copper tannic acid (CuTA) nanosheets with an excellent antibacterial activity were successfully prepared, which showed fine antibacterial and antifouling performance after hybridization with acrylic resin. The morphology and structure characterization of CuTA nanosheets were studied by transmission electron microscopy, scanning electron microscopy, X-ray diffraction, X-ray photoelectron spectroscopy, Fourier transform infrared spectroscopy, thermogravimetric analysis, etc. The plate counting method, zone of inhibition test, and minimum inhibitory concentration (MIC) method were used to detect the antibacterial activity of the prepared samples against Gram-positive Bacillus subtilis (B. subtilis) and Gram-negative Escherichia coli (E. coli). The results showed that the killing rates of 2 and 0.5 mg/mL of CuTA powder were close to 100% after 24 h. The MIC values of E. coli and B. subtilis were 0.25 and 0.5 mg/mL, respectively. The results of morphology and element distribution of bacteria, after treating with CuTA powder, revealed that Cu²⁺ and TA destroyed their cell walls and inhibited the proliferation and growth of the bacteria. Furthermore, the hybrid coating of CuTA nanosheets and acrylic resin showed brilliant antimicrobial performance for E. coli and B. subtilis and antialgae properties under a lower CuTA load (≤5%). The CuTA nanosheets with a low copper content (30.9 wt %) and low pollution have promising applications in marine antifouling coatings.

Targeting the "Sweet Side" of Tumor with Glycan-Binding Molecules Conjugated-Nanoparticles: Implications in Cancer Therapy and Diagnosis

Nanotechnology is in the spotlight of therapeutic innovation, with numerous advantages for tumor visualization and eradication. The end goal of the therapeutic use of nanoparticles, however, remains distant due to the limitations of nanoparticles to target cancer tissue. The functionalization of nanosystem surfaces with biological ligands is a major strategy for directing the actions of nanomaterials specifically to tumor cells. Cancer formation and metastasis are accompanied by profound alterations in protein glycosylation. Hence, the detection and targeting of aberrant glycans are of great value in cancer diagnosis and therapy. In this review, we provide a brief update on recent progress targeting aberrant glycosylation by functionalizing nanoparticles with glycan-binding molecules (with a special focus on lectins and anti-glycan antibodies) to improve the efficacy of nanoparticles in cancer targeting, diagnosis, and therapy and outline the challenges and limitations in implementing this approach. We envision that the combination of nanotechnological strategies and cancer-associated glycan targeting could remodel the field of cancer diagnosis and therapy, including immunotherapy.

Phytochemical screening and determination of phenolics and flavonoids in Dillenia pentagyna using UV-vis and FTIR spectroscopy

Here, we report an ultrasonic-assisted extraction (UAE) of phytochemicals from bark, leaves, sepals, fruits, and seeds of Dillenia pentagyna (Roxb) using different organic solvents such as chloroform, ethanol, and n-hexane. The preliminary phytochemical screening results showed that the ethanolic extract is enriched with phenolics, flavonoids, tannin, saponin, alkaloid, and terpenoids. The profiling of phytochemicals is carried out employing UV-Vis and Fourier-transform infrared (FTIR) spectroscopy analyses. The higher amount of phenolic compounds obtained in the ethanolic extract of bark and leaves as compared to other parts of the plant. Consequently, a higher amount of total flavonoid compounds unveiled in the bark of targeted species. The ethanolic extract of bark and leaves showed good free radical scavenging activity using DPPH with inhibition percentage of 90.58 ± 1.89% and 76.46 ± 1.58%, respectively, in comparison to standard ascorbic acid at 10 μg/mL. Moreover, the half-maximal inhibitory concentration (IC₅₀) value of bark and leaves are 5.64 and 6.54 μg/mL, respectively, in comparison to standard ascorbic acid. With the best of our knowledge, it is the first report pertaining to characterization and quantification of phenols and flavonoids as well as the investigation of the medicinal property in D. pentagyna.

Novel Eco-Friendly Tannic Acid-Enriched Hydrogels-Preparation and Characterization for Biomedical Application

Sodium alginate and tannic acid are natural compounds that can be mixed with each other. In this study, we propose novel eco-friendly hydrogels for biomedical applications. Thus, we conducted the following assessments including (i) observation of the structure of hydrogels by scanning electron microscope; (ii) bioerosion and the concentration of released tannic acid from subjected material; (iii) dehydrogenase activity assay to determine antibacterial activity of prepared hydrogels; and (iv) blood and cell compatibility. The results showed that hydrogels based on sodium alginate/tannic acid exert a porous structure. The immersion in simulated body fluid (SBF) results in the biomineralization process occurring on their surface while the bioerosion studies revealed that the addition of tannic acid improves hydrogels’ stability proportional to its concentration. Besides, tannic acid release concentration depends on the type of hydrogels and the highest amount was noticed for those based on sodium alginate with the content of 30% tannic acid. Antibacterial activity of hydrogels was proven for both Gram-negative and Gram-positive bacteria, the hemolysis rate was below 5% and the viability of the cells was elevated with an increasing amount of tannic acid in hydrogels. Collectively, we assume that obtained materials make the imperative to consider them for biomedical applications.

The construction of novel and efficient hafnium catalysts using naturally existing tannic acid for Meerwein-Ponndorf-Verley reduction

The conversion of carbonyl compounds into alcohols or their derivatives via the catalytic transfer hydrogenation (CTH) process known as Meerwein-Ponndorf-Verley reduction is an important reaction in the reaction chain involved in biomass transformation. The rational design of efficient catalysts using natural and renewable materials is critical for decreasing the catalyst cost and for the sustainable supply of raw materials during catalyst preparation. In this study, a novel hafnium-based catalyst was constructed using naturally existing tannic acid as the ligand. The prepared hafnium-tannic acid (Hf-TA) catalyst was characterized by scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), and thermogravimetry (TG). Hf-TA was applied in the conversion of furfuraldehyde (FD) to furfuryl alcohol (FA) using isopropanol (2-PrOH) as both the reaction solvent and the hydrogen source. Both preparation conditions and the effects of the reaction parameters on the performance of the catalyst were studied. Under the relatively mild reaction conditions of 70 °C and 3 h, FD (1 mmol) could be converted into FA with a high yield of 99.0%. In addition, the Hf-TA catalyst could be reused at least ten times without a notable decrease in activity and selectivity, indicating its excellent stability. It was proved that Hf-TA could also catalyze the conversion of various carbonyl compounds with different structures. The high efficiency, natural occurrence of tannic acid, and facile preparation process make Hf-TA a potential catalyst for applications in the biomass conversion field.

Enhancement of biocompatibility and carbohydrate absorption control potential of rosmarinic acid through crosslinking into microparticles

Rosmarinic acid (RA), a bioflavonoid and antioxidant that exists in plants of the Lamiaceae family, was crosslinked into particles as poly(Rosmarinic Acid) (p(RA)) via an emulsion crosslinking method. The particles were characterized using scanning electron microscopy, Fourier transform infrared spectroscopy, solid state nuclear magnetic resonance 13C NMR spectroscopy, and thermal gravimetric analysis. The zeta potential values of p(RA) particles were determined at different pHs; the isoelectric point was estimated as pH 1.2. The release of monomeric RA from the particles at 37.5 °C was found to be similar at different pHs, 1.0, 7.4, and 11.0. The effects of p(RA) on hemolysis and coagulation were found to be minimal. The antioxidant activity of p(RA) particles and RA monomer were almost indistinguishable suggesting that p(RA) particles may be used as an antioxidant. On a per weight basis, p(RA) particles were ~66% less cytotoxic to mammalian cells that RA monomer, as assessed using COS-1 cells. In addition, p(RA) was an 8.6-fold stronger inhibitor of α-glycosidase than RA; the IC50s of the monomer and particles were 0.121 and 0.014 mg/mL, respectively. The strong inhibitory effect of p(RA) on α-glycosidase, coupled with its reduced cytotoxicity and antioxidant activity, provide new opportunities for the use of p(RA).

Development of a safe and efficient gene delivery system based on a biodegradable tannic acid backbone

Finding a safe and efficient gene delivery vector is a major international challenge facing the development of gene therapy. Tannic acid (TA) is a natural cross-linker owing to its hydroxyl and carboxyl groups that can interact with biopolymers for different biomaterial design. In this work, three polyethyleneimine-modified TA polymers were prepared, and the polymers were characterized by FTIR, UV-vis, elemental analysis and ¹H NMR. The potential of PTAs as gene vector was studied in vitro, including DNA loading capacity, DNA protection ability and biocompatibility. In addition, the particle size, zeta potential, DNA encapsulation efficiency, cell uptake and transfection efficiency of the PTA-pDNA polyplexes were also studied. The results showed that PTA2k and PTA30k could completely condense DNA at N/P of 2, and PTA600 could only completely condense DNA at N/P of 50. The PTA/pDNA polyplexes could protect DNA from degrading by DNA enzymes and could be efficiently uptaked by cells. Biocompatibility assay showed that PTA had no significant cytotoxicity and effect on cell proliferation compared to PEI. At low N/P ratios of 1-4, PTA showed higher transfection efficiency than PEI, and the transfection efficiency increased with the increase of PEI molecular weight in PTA. At N/P of 3, PTA30k showed the highest transfection efficiency of 23.8%, while PEI30k showed only 6.7%. These results indicate that PTA is a promising candidate vector for safe and efficient gene delivery.

Role of Surface Chemistry in Mediating the Uptake of Ultrasmall Iron Oxide Nanoparticles by Cancer Cells

Ultrasmall iron oxide nanoparticles (USIONPs) (<4 nm) have recently attracted significant attention because of their potential as positive T₁ magnetic resonance imaging (MRI) contrast agent contrary to larger superparamagnetic iron oxide nanoparticles (>6 nm) which act as negative T₂ MRI contrast agents. However, studies on the cellular uptake behavior of these nanoparticles are very limited compared to their counterpart, larger-sized superparamagnetic iron oxide nanoparticles. In particular, the effects of specific nanoparticle parameters on the cellular uptake behavior of USIONPs by various cancer cells are not available. Here, we specifically investigated the role of USIONPs' surface functionalities [tannic acid (TA) and quinic acid (QA)] in mediating cellular uptake behavior of cancer cells pertaining to primary (U87 cells) and metastatic (MDA-MB-231Br cells) brain malignancies. Here, we chose TA and QA as representative capping molecules, wherein TA coating provides a general negatively charged nontargeting surface while QA provides a tumor-targeting surface as QA and its derivatives are known to interact with selectin receptors expressed on tumor cells and tumor endothelium. We observed differential cellular uptake in the case of TA- and QA-coated USIONPs by cancer cells. Both the cell types showed significantly higher cellular uptake of QA-coated USIONPs compared to TA-coated USIONPs at 4, 24, and 72 h. Blocking studies indicated that P-selectin cell surface receptors, in part, mediated the cellular uptake of QA-coated USIONPs. Given that P-selectin is overexpressed in cancer cells, tumor microenvironment, and at the metastatic niche, QA-coated USIONPs hold potential to be utilized as a platform for tumor-targeted drug delivery and in imaging and detection of primary and metastatic tumors.

Degradable Polymer Stars Based on Tannic Acid Cores by ATRP

Degradable polymers are crucial in order to reduce plastic environmental pollution and waste accumulation. In this paper, a natural product, tannic acid was modified to be used as a polymer star core. The tannic acid was modified with atom transfer radical polymerization (ATRP) initiators and characterized by 1H NMR, FT-IR, and XPS. Twenty-five arm polymer stars were prepared by photoinduced ATRP of poly(methyl methacrylate) (PMMA) or poly(oligo(ethylene oxide) methacrylate) (molar mass Mw = 300 g/mol) (P(OEO300MA)). The polymer stars were degraded by cleaving the polymer star arms attached to the core by phenolic esters under mild basic conditions. The stars were analyzed before and after degradation by gel permeation chromatography (GPC). Cytotoxicity assays were performed on the P(OEO300MA) stars and corresponding degraded polymers, and were found to be nontoxic at the concentrations tested.

Bactericidal and Biocompatible Properties of Plasma Chemical Oxidized Titanium (TiOB®) with Antimicrobial Surface Functionalization

Coating of plasma chemical oxidized titanium (TiOB^®) with gentamicin-tannic acid (TiOB^® gta) has proven to be efficient in preventing bacterial colonization of implants. However, in times of increasing antibiotic resistance, the development of alternative antimicrobial functionalization strategies is of major interest. Therefore, the aim of the present study is to evaluate the antibacterial and biocompatible properties of TiOB^® functionalized with silver nanoparticles (TiOB^® SiOx Ag) and ionic zinc (TiOB^® Zn). Antibacterial efficiency was determined by agar diffusion and proliferation test on Staphylocuccus aureus. Cytocompatibility was analyzed by direct cultivation of MC3T3-E1 cells on top of the functionalized surfaces for 2 and 4 d. All functionalized surfaces showed significant bactericidal effects expressed by extended lag phases (TiOB^® gta for 5 h, TiOB^® SiOx Ag for 8 h, TiOB^® Zn for 10 h). While TiOB^® gta (positive control) and TiOB^® Zn remained bactericidal for 48 h, TiOB^® SiOx Ag was active for only 4 h. After direct cultivation for 4 d, viable MC3T3-E1 cells were found on all surfaces tested with the highest biocompatibility recorded for TiOB^® SiOx Ag. The present study revealed that functionalization of TiOB^® with ionic zinc shows bactericidal properties that are comparable to those of a gentamicin-containing coating.

Self-assembled tannic acid complexes for pH-responsive delivery of antibiotics: Role of drug-carrier interactions

Self-assembled particles, based on non-covalent interactions, are attractive drug carriers with a relatively simple structure and easy preparation. Tannic acid (TA) is an anionic polyphenolic compound with a wide range of molecular interactions and diverse applications in drug delivery research. Here, we propose the use of TA complexes with cationic antibiotics as a new pH-responsive drug carrier of high drug loading and optimal stability. TA complexes were prepared with three water-soluble antibiotics; colistin sulfate (COL), gentamicin sulfate (GEN) and gatifloxacin (GAT). Complexes' size ranged from several-hundred nanometers to few microns. For selected particles, drug loading ranged from 30 to 36%. Importantly, we demonstrate the impact of drug-carrier interactions, studied via infrared spectroscopy and molecular modeling, on final complex stability and performance; the complexes resisted dissociation in presence of serum at physiological pH to variable degrees and showed different drug release profiles. However, all complexes dissociated upon medium acidification, releasing their drug payload and demonstrating expected antibacterial effect. These results demonstrate that TA/antibiotic self-assembled complexes represent an excellent carrier for pH-sensitive delivery of water-soluble drugs. In addition to system's simplicity and low cost, complexes were easily prepared with high drug loading and desirable pH-dependent association/dissociation profile.

Multiple Weak H-Bonds Lead to Highly Sensitive, Stretchable, Self-Adhesive, and Self-Healing Ionic Sensors

Herein, we demonstrate a ternary ionic hydrogel sensor consisting of tannic acid, sodium alginate, and covalent cross-linked polyacrylamide as skin-mountable and wearable sensors. Based on the multiple weak H-bonds and synergistic effects between the three components, the as-prepared hybrid hydrogel exhibits ultrastretchability with high elasticity, good self-healing, excellent conformability, and high self-adhesiveness to diverse substrates both in air and underwater. More importantly, the ternary hydrogel exhibits high strain sensitivity especially under subtle strains with a gauge factor of 2.0, which is close to the theoretical value of the ionic hydrogel sensors; an extremely large workable range of strain (0.05-2100%); and a low operating voltage 0.07 V. Consequently, the sensor demonstrates superior sensing performance for real-time monitoring of the large and subtle human motions, including limb motions, swallowing, smiling, and wrist pulse. Therefore, it is believed that the STP hydrogel has great potential applications in health monitoring, smart wearable devices, and soft robots.

Evaluation of different saccharides and chitin as eco-friendly additive to improve the magnetic cross-linked enzyme aggregates (CLEAs) activities

The cross-linked enzyme aggregates (CLEAs) involves formation of a number of covalent bonds between enzyme and the matrix using glutaraldehyde. In general, amino groups of lysine, sulfhydryl groups of cysteine, phenolic OH groups of tyrosine, or imidazol group of histidine are used for enzyme binding under mild conditions. The main advantage of this method is its simplicity, economic advantages in the industrial bio catalysis. The Fe₃O₄ magnetic nanoparticles were synthesized by coprecipitating Fe²⁺and Fe³⁺in alkaline solution. Tannic acid was used to functionalize the Fe₃O₄ magnetic nanoparticles. After functionalization process, tannic acid magnetic cross-linked enzyme aggregates of enzyme (TA-MNPs-CLEAs) were prepared by cross-linking of enzyme aggregates with different saccharides as additive. The present result reported high stability, simplicity, low cost and recyclability of a saccharide-TA-MNPs-CLEAs-enzyme make it efficient as a highly active biocatalyst in biotechnological applications. The obtained results suggest that disaccharides (maltose, sucrose and lactose) and polysaccharide such as starch are eco-friendly additives to TA-MNPs-lipase and TA-MNPs-CLEAs-peroxidase and can become a powerful biocatalyst in industry applications.

Enhancing the antimicrobial and antibiofilm effectiveness of silver nanoparticles prepared by green synthesis

Water soluble catechin oligomers produce small (8.5 nm) silver nanoparticles with high antimicrobial and antibiofilm efficacy.

Polyelectrolyte complexes based on alginate/tanfloc: Optimization, characterization and medical application

Hydrogels based on alginate and tanfloc (a cationic biopolymer obtained from natural condensed tannins) were successfully prepared. Tanfloc (TN) presents high aqueous solubility at pHs lower than 10; it contains substituted amino sites and molar weight of ca. 600,000gmol^-1. A factorial design (2²) was used to optimize the yield of alginate/tanfloc polyelectrolyte complexes (PECs). Dialysis recovered the overplus of alginate (AG) no complexed with TN. These materials were characterized by thermal analyses (TGA/DTG and DSC), zeta potential, and FTIR, while SEM technique depicted a rough surface on AG/TN complex, containing non-homogeneous pores. Indeed, the AG and TN were tailored to elicit scaffold materials with outstanding cytocompatibility, mainly upon mouse preosteoblastic cells because of reconstruction of bone tissues (119% at 10days). The AG/TN complex also displayed antioxidant and bactericidal activities against Staphylococcus aureus (S. aureus). Besides, the pristine TN fostered bacteriostatic and bactericidal performances towards S. aureus and Escherichia coli. However, for our best knowledge, no studies were still carried out on TN and TN-based materials for medical purpose.

Europium-phenolic network coated BaGdF5 nanocomposites for tri-modal computed tomography/magnetic resonance/luminescence imaging

Multifunctional nanocomposites based on BaGdF₅ nanoparticles (NPs) and metal phenolic network (MPN) have been engineered as novel contrast agents for potential applications in X-ray computed tomography, magnetic resonance and luminescence imaging. The BaGdF₅@MPN nanocomposites were synthesized at room temperature by coating BaGdF₅ NPs with europium-phenolic network, which was obtained by the coordination of europium (III) with tannic acid (TA). The in vitro cytotoxicity assays against HepG2 cells revealed that the BaGdF₅@MPN nanocomposites presented better cytocompatibility and lower cytotoxity than pure BaGdF₅ NPs. In addition, vivid red and green luminescence can be observed by confocal laser scanning microscope (CLSM) from the BaGdF₅@MPN nanocomposites laden HepG2 cells under the excitation of UV (390 nm) and visible light (440 nm), respectively. The longitudinal relaxivity value (r₁) of the nanocomposites was 2.457 mM^-1s^-1. Moreover, the nanocomoposites exhibited X-ray computed tomography (CT) and T₁-weighted magnetic resonance (MR) imaging capacities, and the intensities of the enhanced signals of in vitro CT and MR images were proportional to the concentrations of the nanocomposites. These results indicated that the as-prepared BaGdF₅@MPN nanocomposites are promising contrast agents for CT/MR/luminescence imaging.