Preparation, characterization and antimicrobial applications of Zn-Fe LDH against MRSA

Actinobacterium-Mediated Green Synthesis of CuO/Zn-Al LDH Nanocomposite Using Micromonospora sp. ISP-2 27: A Synergistic Study that Enhances Antimicrobial Activity

Bacterial resistance to conventional antibiotics has created an urgent need to develop enhanced alternatives. Nanocomposites combined with promising antibacterial nanomaterials can show improved antimicrobial activity compared to that of their components. In this work, green synthesized CuO nanoparticles (NPs) supported on an anionic clay with a hydrotalcite-like structure such as Zn-Al layered double hydroxide (LDH) nanocomposite were investigated as antimicrobial agents. This nanocomposite was synthesized using Micromonospora sp. ISP-2 27 cell-free supernatant to form CuO NPs on the surface of previously synthesized LDH. The prepared samples were characterized using UV-Vis spectrophotometry, XRD, FTIR, Field emission scanning electron microscopy with EDX, zeta potential, and hydrodynamic particle size. UV-vis spectral analysis of the biosynthesized CuO NPs revealed a maximum peak at 300 nm, indicating their successful synthesis. The synthesized CuO NPs had a flower-like morphology with a size range of 43-78 nm, while the LDH support had a typical hexagonal layered structure. The zeta potentials of the CuO NPs, Zn-Al LDH, and CuO NPs/LDH nanocomposite were -21.4, 22.3, and 30.8 mV, respectively, while the average hydrodynamic sizes were 687, 735, and 528 nm, respectively. The antimicrobial activity of the produced samples was tested against several microbes. The results demonstrated that the nanocomposite displayed superior antimicrobial properties compared to those of its components. Among the microbes tested, Listeria monocytogenes ATCC 7644 was more sensitive (30 ± 0.34) to the biosynthesized nanocomposite than to CuO NPs (25 ± 0.05) and Zn-Al LDH (22 ± 0.011). In summary, the use of nanocomposites with superior antimicrobial properties has the potential to offer innovative solutions to the global challenge of antibiotic resistance by providing alternative treatments, reducing the reliance on traditional antibiotics, and contributing to the development of more effective and targeted therapeutic approaches.

Design, preparation, and performance of different adsorbents based on carboxymethyl chitosan/sodium alginate hydrogel beads for selective adsorption of Cadmium (II) and Chromium (III) metal ions

Developing cost-effective and efficient adsorbents for heavy metals in multicomponent systems is a challenge that needs to be resolved to meet the challenges of wastewater treatment technology. Two adsorbents were synthesized, characterized, and investigated for the removal of Cd2+ and Cr3+ as model heavy metals in their single and binary solutions. The first adsorbent (ACZ) was a nanocomposite formed of O-Carboxymethyl chitosan, sodium alginate, and zeolite. While, the other (ACL) contained ZnFe layered double hydroxides instead of the zeolite phase. Adsorbents were characterized using XRD, FTIR, SEM, and swelling degree analysis. For single heavy metal adsorption isotherms, data for both adsorbents was best fitted and indicated a multilayer adsorption nature. For binary adsorption, Langmuir model with interacting parameters showed the best results compared to other models for both pollutants. For single system, Avrami model was found to be the best model representing the adsorption kinetics data, which indicates that the mechanism of adsorption follows multiple kinetic orders that may change during duration of adsorption process. Numerous interaction mechanisms can occur between the heavy metals and functional groups in the synthesized hydrogels such as NH2, COOH, and OH groups leading to efficient adsorption of metal ions.

Understanding the nanoscale adhesion forces between the fungal pathogen Candida albicans and antimicrobial zinc-based layered double hydroxides using single-cell and single-particle force spectroscopy

Antifungal resistance has become a very serious concern, and Candida albicans is considered one of the most opportunistic fungal pathogens responsible for several human infections. In this context, the use of new antifungal agents such as zinc-based layered double hydroxides to fight such fungal pathogens is considered one possible means to help limit the problem of antifungal resistance. In this study, we show that ZnAl LDH nanoparticles exhibit remarkable antifungal properties against C. albicans and cause serious cell wall damage, as revealed by growth tests and atomic force microscopy (AFM) imaging. To further link the antifungal activity of ZnAl LDHs to their adhesive behaviors toward C. albicans cells, AFM-based single-cell spectroscopy and single-particle force spectroscopy were used to probe the nanoscale adhesive interactions. The force spectroscopy analysis revealed that antimicrobial ZnAl LDHs exhibit specific surface interactions with C. albicans cells, demonstrating remarkable force magnitudes and adhesion frequencies in comparison with non-antifungal negative controls, e.g., Al-coated substrates and MgAl LDHs, which showed limited interactions with C. albicans cells. Force signatures suggest that such adhesive interactions may be attributed to the presence of agglutinin-like sequence (Als) adhesive proteins at the cell wall surface of C. albicans cells. Our findings propose the presence of a strong correlation between the antifungal effect provided by ZnAl LDHs and their nanoscale adhesive interactions with C. albicans cells at both the single-cell and single-particle levels. Therefore, ZnAl LDHs could interact with C. albicans fungal pathogens by specific adhesive interactions through which they adhere to fungal cells, leading to their damage and subsequent growth inhibition.

Efficient Dye Degradation and Antimicrobial Behavior with Molecular Docking Performance of Silver and Polyvinylpyrrolidone-Doped Zn-Fe Layered Double Hydroxide

Zn-Fe layered double hydroxide (LDH) was synthesized through the low-temperature-based coprecipitation method. Various concentrations of Ag (1, 3, and 5 wt %) with a fixed amount (5 wt %) of polyvinylpyrrolidone (PVP) were doped into LDH nanocomposites. This research aims to improve the bactericidal properties and catalytic activities of doping-dependent nanocomposites. Adding Ag and PVP to LDH enhanced oxygen vacancies, which increased the amount of hydroxide adsorption sites and the number of active sites. The doped LDH was employed to degrade rhodamine-B dye in the presence of a reducing agent (NaBH4), and the obtained results showed maximum dye degradation in a basic medium compared to acidic and neutral. The bactericidal efficacy of doped Zn-Fe (5 wt %) showed a considerably greater inhibition zone of 3.65 mm against Gram-negative (G-ve) or Escherichia coli (E. coli). Furthermore, molecular docking was used to decipher the mystery behind the microbicidal action of Ag-doped PVP/Zn-Fe LDH and to propose an inhibition mechanism of β-ketoacyl-acyl carrier protein synthase IIE. coli (FabH) and deoxyribonucleic acid gyrase E. coli behind in vitro results.

Investigation of ternary Zn-Co-Fe layered double hydroxide as a multifunctional 2D layered adsorbent for moxifloxacin and antifungal disinfection

Layered double hydroxides have recently gained wide interest as promising multifunctional nanomaterials. In this work, a multifunctional ternary Zn-Co-Fe LDH was prepared and characterized using XRD, FTIR, BET, TEM, SEM, and EDX. This LDH showed a typical XRD pattern with a crystallite size of 3.52 nm and a BET surface area of 155.9 m2/g. This LDH was investigated, for the first time, as an adsorbent for moxifloxacin, a common fluoroquinolones antibiotic, showing a maximum removal efficiency and equilibrium time of 217.81 mg/g and 60 min, respectively. Its antifungal activity, for the first time, was investigated against Penicillium notatum, Aspergillus flavus, Aspergillus fumigatus, Aspergillus niger, and Mucor fungi at various concentrations (1000-1.95 µg/mL). This LDH was found to be effective against a variety of fungal strains, particularly Penicillium and Mucor species and showed zones of inhibition of 19.3 and 21.6 mm for Penicillium and Mucor, respectively, with an inhibition of 85% for Penicillium species and 68.3% for Mucormycosis. The highest antifungal efficacy results were obtained at very low MIC concentrations (33.3 and 62 µg/ml) against Penicillium and Mucor, respectively. The results of this study suggest a promising multifunctional potential of this LDH for water and wastewater treatment and disinfection applications.

Nanotechnology-based techniques for hair follicle regeneration

The hair follicle (HF) is a multicellular complex structure of the skin that contains a reservoir of multipotent stem cells. Traditional hair repair methods such as drug therapies, hair transplantation, and stem cell therapy have limitations. Advances in nanotechnology offer new approaches for HF regeneration, including controlled drug release and HF-specific targeting. Until recently, embryogenesis was thought to be the only mechanism for forming hair follicles. However, in recent years, the phenomenon of wound-induced hair neogenesis (WIHN) or de novo HF regeneration has gained attention as it can occur under certain conditions in wound beds. This review covers HF-specific targeting strategies, with particular emphasis on currently used nanotechnology-based strategies for both hair loss-related diseases and HF regeneration. HF regeneration is discussed in several modalities: modulation of the hair cycle, stimulation of progenitor cells and signaling pathways, tissue engineering, WIHN, and gene therapy. The HF has been identified as an ideal target for nanotechnology-based strategies for hair regeneration. However, some regulatory challenges may delay the development of HF regeneration nanotechnology based-strategies, which will be lastly discussed.

A New Cu/Fe Layer Double Hydroxide Nanocomposite Exerts Anticancer Effects against PC-3 Cells by Inducing Cell Cycle Arrest and Apoptosis

Prostate cancer treatment poses significant challenges due to its varying aggressiveness, potential for metastasis, and the complexity of treatment options. Balancing the effectiveness of therapies, minimizing side effects, and personalizing treatment strategies are ongoing challenges in managing this disease. Significant advances in the use of nanotechnology for the treatment of prostate cancer with high specificity, sensitivity, and efficacy have recently been made. This study aimed to synthesize and characterize a novel Cu/Fe layer double hydroxide (LDH) nanocomposite for use as an anticancer agent to treat prostate cancer. Cu/Fe LDH nanocomposites with a molar ratio of 5:1 were developed using a simple co-precipitation approach. FT-IR, XRD, SEM, TEM, TGA, and zeta potential analyses confirmed the nanocomposite. Moreover, the MTT cell viability assay, scratch assay, and flow cytometry were utilized to examine the prospective anticancer potential of Cu/Fe LDH on a prostate cancer (PC-3) cell line. We found that Cu/Fe LDH reduced cell viability, inhibited cell migration, induced G1/S phase cell cycle arrest, and triggered apoptotic effect in prostate cancer cells. The findings also indicated that generating reactive oxygen species (ROS) formation could improve the biological activity of Cu/Fe LDH. Additionally, Cu/Fe LDH showed a good safety impact on the normal lung fibroblast cell line (WI-38). Collectively, these findings demonstrate that the Cu/Fe LDH nanocomposite exhibited significant anticancer activities against PC-3 cells and, hence, could be used as a promising strategy in prostate cancer treatment.

Microenvironment Restruction of Emerging 2D Materials and their Roles in Therapeutic and Diagnostic Nano-Bio-Platforms

Engineering advanced therapeutic and diagnostic nano-bio-platforms (NBPFs) have emerged as rapidly-developed pathways against a wide range of challenges in antitumor, antipathogen, tissue regeneration, bioimaging, and biosensing applications. Emerged 2D materials have attracted extensive scientific interest as fundamental building blocks or nanostructures among material scientists, chemists, biologists, and doctors due to their advantageous physicochemical and biological properties. This timely review provides a comprehensive summary of creating advanced NBPFs via emerging 2D materials (2D-NBPFs) with unique insights into the corresponding molecularly restructured microenvironments and biofunctionalities. First, it is focused on an up-to-date overview of the synthetic strategies for designing 2D-NBPFs with a cross-comparison of their advantages and disadvantages. After that, the recent key achievements are summarized in tuning the biofunctionalities of 2D-NBPFs via molecularly programmed microenvironments, including physiological stability, biocompatibility, bio-adhesiveness, specific binding to pathogens, broad-spectrum pathogen inhibitors, stimuli-responsive systems, and enzyme-mimetics. Moreover, the representative therapeutic and diagnostic applications of 2D-NBPFs are also discussed with detailed disclosure of their critical design principles and parameters. Finally, current challenges and future research directions are also discussed. Overall, this review will provide cutting-edge and multidisciplinary guidance for accelerating future developments and therapeutic/diagnostic applications of 2D-NBPFs.

Carbonaceous CoCr LDH nanocomposite as a light-responsive sonocatalyst for treatment of a plasticizer-containing water

The carbonous-based nanocomposites of CoCr layered double hydroxide (LDH) with graphene oxide (GO) and reduced graphene oxide (rGO) were prepared. The successful synthesis of the CoCr LDH in hydrotalcite crystalline structure was deduced from the pattern obtained from X-ray diffraction, and the chemical composition of its surface was checked by X-ray photoelectron spectroscopy. The prosperous decorating of LDH on the sheets of rGO and GO was authenticated by the energy dispersive X-ray spectroscopy analysis and micrographs of scanning electron and transmission electron microscopy. The photo-assisted sonocatalytic activity of the prepared nanocomposites was appraised for the decomposition of dimethyl phthalate (DMP) as a plasticizer. The highest decomposition efficiency of 100% was obtained in the existence of CoCr LDH/rGO nanocomposite (0.5 g/L) during 20 min of reaction time via photo-assisted sonocatalysis. The rGO improved the catalytic activity of the CoCr LDH by increasing the specific surface area from 1.2 m²/g to 4.5 m²/g and reducing the band gap from 1.7 eV to 1.3 eV. Moreover, the results of the colony-forming unit method endorsed antibacterial property improvement of the CoCr LDH via hybridizing with rGO. The results of this research provide an optimistic perspective for applying carbonous-based nanocomposites of CoCr LDH as a novel catalyst with antibacterial properties in photo-assisted sonocatalytic processes.

Antimicrobial properties of promising Zn-Fe based layered double hydroxides for the disinfection of real dairy wastewater effluents

Bacterial resistance to conventional antibiotics is a serious challenge that requires novel antibacterial agents. Moreover, wastewater from dairy farms might contain countless number of pathogens, organic contaminants and heavy metals that consider a threat to the terrestrial and aquatic environment. Therefore, the development of cost-effective, highly operation-convenient, recyclable multifunctional antimicrobial agents became an urgent necessity. Layered double hydroxides (LDH) have shown promising results as antibacterial agents. However, more work is required to further investigate and improve the antimicrobial performance of LDH structures against pathogens. In this study three Zn-Fe based LDH were investigated for real dairy wastewater disinfection. The three LDH samples were cobalt substituted Zn-Fe LDH (CoZnFe), magnesium substituted Zn-Fe LDH (MgZnFe) and MgZnFe-Triazol LDH (MgZnFe-Tz) nanocomposite. Seventy-five wastewater samples were collected from a dairy farm sewage system. The sensitivity of isolated pathogens was tested against two commonly used disinfectants (Terminator and TH4) and was assessed against the three LDH samples at different concentrations. The overall prevalence of S. agalactiae, S. dysgalactiae and Staph. aureus was significantly at 80.0% (P-value = 0.008, X2 = 9.700). There was variable degree of resistance to the tested disinfectants, whereas the antimicrobial activity of CoZnFe LDH was increased significantly at a concentration of 0.005 mg/L followed by MgZnFe LDH while MgZnFe-Tz LDH showed minor antibacterial potency. It was concluded that CoZnFe LDH showed a better biocidal activity in killing the isolated resistant pathogens, making it a good choice tool in combating the zoonotic microbes in wastewater sources.

Green synthesis and characterization of iron oxide nanoparticles for the removal of heavy metals (Cd2+ and Ni2+) from aqueous solutions with Antimicrobial Investigation

Clove and green Coffee (g-Coffee) extracts were used to synthesize green iron oxide nanoparticles, which were then used to sorb Cd²⁺ and Ni²⁺ ions out of an aqueous solution. Investigations with x-ray diffraction, Fourier-transform infrared spectroscopy, transmission electron microscopy, X-ray photoelectron spectroscopy, nitrogen adsorption and desorption (BET), Zeta potential, and scanning electron microscopy were performed to know and understand more about the chemical structure and surface morphology of the produced iron oxide nanoparticles. The characterization revealed that the main component of iron nanoparticles was magnetite when the Clove extract was used as a reducing agent for Fe³⁺, but both magnetite and hematite were included when the g-Coffee extract was used. Sorption capacity for metal ions was studied as a function of sorbent dosage, metal ion concentration, and sorption period. The maximum Cd²⁺ adsorption capacity was 78 and 74 mg/g, while that of Ni²⁺ was 64.8 and 80 mg/g for iron nanoparticles prepared using Clove and g-Coffee, respectively. Different isotherm and kinetic adsorption models were used to fit experimental adsorption data. Adsorption of Cd²⁺ and Ni²⁺ on the iron oxide surface was found to be heterogeneous, and the mechanism of chemisorption is involved in the stage of determining the rate. The correlation coefficient R² and error functions like RMSE, MES and MAE were used to evaluate the best fit models to the experimental adsorption data. The adsorption mechanism was explored using FTIR analysis. Antimicrobial study showed broad spectrum antibacterial activity of the tested nanomaterials against both Gram positive (S. aureus) (25923) and Gram negative (E. coli) (25913) bacteria with increased activity against Gram positive bacteria than Gram negative one and more activity for Green iron oxide nanoparticles prepared from Clove than g-Coffee one.

Nanoarchitecture of graphene nanosheets decorated with NiCr layered double hydroxide for sonophotocatalytic degradation of refractory antibiotics

Highly efficient and durable catalysts for wastewater treatment are urgently required to tackle critical environmental issues. In this regard, NiCr LDH (NC), NiCr LDH-GO (NC-GO), and NiCr LDH-rGO (NC-rGO) nanocomposites were synthesized. The results of XRD, EDX, and FTIR analyses not only explored the crystallographic and chemical structures of catalysts but also confirmed the successful synthesis. Further morphological, physical, chemical, and optical characteristics of the catalysts were evaluated more by SEM, HRTEM, BET, DRS, and XPS techniques. The as-synthesized catalysts were used for the efficient mineralization of rifadin under 50 W LED visible light irradiation and the ultrasonic power of 150 W. Amongst, 0.75 g L^-1 of NC-rGO demonstrated high sonophotocatalytic efficiency (88%) in natural pH (pH = 8) of 15 mg L^-1 of rifadin. The introduced system is also powerful for the decontamination of pharmaceutical-containing wastewater as well as other refractory antibiotics. Moreover, the radical trapping experiments demonstrated that the main reactive species involved in the degradation of rifadin are ^•OH, h⁺, and O₂^•-. The possible intermediates were thoroughly investigated using GCMS analysis. Also, NC-rGO demonstrated superior antibacterial activity in comparison with NC, NC-GO samples.

Low-cost treated lignocellulosic biomass waste supported with FeCl3/Zn(NO3)2 for water decolorization

Dye pollution has always been a serious concern globally, threatening the lives of humans and the ecosystem. In the current study, treated lignocellulosic biomass waste supported with FeCl₃/Zn(NO₃)₂ was utilized as an effective composite for removing Reactive Orange 16 (RO16). SEM/EDAX, FTIR, and XRD analyses exhibited that the prepared material was successfully synthesized. The removal efficiency of 99.1% was found at an equilibrium time of 110 min and dye concentration of 5 mg L^-1 Adsorbent mass of 30 mg resulted in the maximum dye elimination, and the efficiency of the process decreased by increasing the temperature from 25 to 40 °C. The effect of pH revealed that optimum pH was occurred at acidic media, having the maximum dye removal of greater than 90%. The kinetic and isotherm models revealed that RO16 elimination followed pseudo-second-order (R² = 0.9982) and Freundlich (R² = 0.9758) assumptions. Surprisingly, the performance of modified sawdust was 15.5 times better than the raw sawdust for the dye removal. In conclusion, lignocellulosic sawdust-Fe/Zn composite is promising for dye removal.

Impact of Nanolayered Material and Nanohybrid Modifications on Their Potential Antibacterial Activity

Due to an escalating increase in multiple antibiotic resistance among bacteria, novel nanomaterials with antimicrobial properties are being developed to prevent infectious diseases caused by bacteria that are common in wastewater and the environment. A series of nanolayered structures and nanohybrids were prepared and modified by several methods including an ultrasonic technique, intercalation reactions of fatty acids, and carbon nanotubes, in addition to creating new phases based on zinc and aluminum. The nanomaterials prepared were used against a group of microorganisms, including E. coli, S. aureus, Klebsiella pneumoniae and Pseudomonas aeruginosa. Experimental results revealed that a nanohybrid based on carbon nanotubes and fatty acids showed significant antimicrobial activity against E. coli, and can be implemented in wastewater treatment. Similar behavior was observed for a nanolayered structure which was prepared using ultrasonic waves. For the other microorganisms, a nanolayered structure combined with carbon nanotubes showed a significant and clear inhibitory effect on S. aureus, Klebsiella pneumoniae and Pseudomonas aeruginosa. It is concluded that the nanolayered structures and nanohybrids, which can be modified at low cost with high productivity, using simple operations and straightforward to use equipment, can be considered good candidates for preventing infectious disease and inhibiting the spread of bacteria, especially those that are commonly found in wastewater and the environment.

Understanding the role of surface interactions in the antibacterial activity of layered double hydroxide nanoparticles by atomic force microscopy

Understanding the mechanisms of the interactions between zinc-based layered double hydroxides (LDHs) and bacterial surfaces is of great importance to improve the efficiency of these antibiotic-free antibacterial agents. In fact, the role of surface interactions in the antibacterial activity of zinc-based LDH nanoparticles compared to that of dissolution and generation of reactive oxygen species (ROS) is still not well documented. In this study, we show that ZnAl LDH nanoparticles exhibit a strong antibacterial effect against Staphylococcus aureus by inducing serious cell wall damages as revealed by the antibacterial activity tests and atomic force microscopy (AFM) imaging, respectively. The comparison of the antibacterial properties of ZnAl LDH nanoparticles and micron-sized ZnAl LDHs also demonstrated that the antibacterial activity of Zn-based LDHs goes beyond the simple dissolution into Zn²⁺ antibacterial ions. Furthermore, we developed an original approach to functionalize AFM tips with LDH films in order to probe their interactions with living S. aureus cells by means of AFM-based force spectroscopy (FS). The force spectroscopy analysis revealed that antibacterial ZnAl LDH nanoparticles show specific recognition of S. aureus cells with high adhesion frequency and remarkable force magnitudes. This finding provides a first insight into the antibacterial mechanism of Zn-based LDHs through direct surface interactions by which they are able to recognize and adhere to bacterial surfaces, thus damaging them and leading to subsequent growth inhibition.

Layered double hydroxide-based nanomaterials for biomedical applications

Against the backdrop of increased public health awareness, inorganic nanomaterials have been widely explored as promising nanoagents for various kinds of biomedical applications. Layered double hydroxides (LDHs), with versatile physicochemical advantages including excellent biocompatibility, pH-sensitive biodegradability, highly tunable chemical composition and structure, and ease of composite formation with other materials, have shown great promise in biomedical applications. In this review, we comprehensively summarize the recent advances in LDH-based nanomaterials for biomedical applications. Firstly, the material categories and advantages of LDH-based nanomaterials are discussed. The preparation and surface modification of LDH-based nanomaterials, including pristine LDHs, LDH-based nanocomposites and LDH-derived nanomaterials, are then described. Thereafter, we systematically describe the great potential of LDHs in biomedical applications including drug/gene delivery, bioimaging diagnosis, cancer therapy, biosensing, tissue engineering, and anti-bacteria. Finally, on the basis of the current state of the art, we conclude with insights on the remaining challenges and future prospects in this rapidly emerging field.

Facile preparation of sisal-Fe/Zn layered double hydroxide bio-nanocomposites for the efficient removal of rifampin from aqueous solution: kinetic, equilibrium, and thermodynamic studies

In the present study, sisal-Fe/Zn LDH bio-nanocomposite for efficiently removing rifampin was synthesized using a simple co-precipitation method. SEM, XRD, and FTIR analyses were applied to characterize the prepared composite. In the following, different factors that are affecting the adsorption of rifampin, including contact time, initial rifampin concentration, adsorbent dosage, and temperature were evaluated. Also, the kinetic, isotherm, and thermodynamic studies were investigated. The results indicated that Freundlich (R² = 0.9976) was a suitable model for describing the adsorption equilibrium and adsorption kinetic showed that the data are in maximum agreement with the pseudo-second-order kinetic model (R² = 0.9931). According to the Langmuir isotherm model, the maximum adsorption capacity of rifampin was found to be 40.00 mg/g. The main mechanisms for rifampin elimination were introduced as electrostatic attraction and physical adsorption. Moreover, the spontaneity and nature of the reaction were analyzed by elucidating thermodynamic factors that indicated the adsorption process was exothermic and spontaneous. Also, the batch process design indicated that for treating 10 L wastewater containing 100 mg/L rifampin with a removal efficiency of 96%, the needed amount of sisal-Fe/Zn LDH is 51.6 g. This study revealed that the sisal-Fe/Zn LDH bio-nanocomposites as a low-cost adsorbent have promising adsorption potential.

Direct contact, dissolution and generation of reactive oxygen species: How to optimize the antibacterial effects of layered double hydroxides

Infections by pathogenic bacteria have been threatening several fields as food industries, agriculture, textile industries and healthcare products. Layered double hydroxides materials (LDHs), also called anionic clays, could be utilized as efficient antibacterial materials due to their several interesting properties such as ease of synthesis, tunable chemical composition, biocompatibility and anion exchange capacity. Pristine LDHs as well as LDH-composites including antibacterial molecules and nanoparticles loaded-LDHs were proven to serve as efficient antibacterial agents against various Gram-positive and Gram-negative bacterial strains. The achieved antibacterial effect was explained by the following mechanisms: (1) Direct contact between the materials and bacterial cells driven by electrostatic interactions between positively charged layers and negatively charged cell membranes, (2) Dissolution and gradual release over time of metallic ions or antibacterial molecules, (3) Generation of reactive oxygen species.

Layered Double Hydroxides (LDHs) as New Consolidants for Cultural Heritage Masonry

(1) Background: In time, stone monuments suffer a process of aging and loss of aesthetic and mechanical properties. In order to restore and stop the loss of their properties, various treatments are used, and in this context, a new class of discovered materials with interesting properties are layered double hydroxides, or LDHs. (2) Methods: The LDHs, prepared by a coprecipitation method, were characterized by the structure by X-ray diffraction, composition by FT-IR spectroscopy and X-ray fluorescence spectroscopy, size by diffuse light scattering, and porosity by N2 adsorption/desorption. Additionally, some microscopy techniques such as optical microscopy and SEM/EDAX were used for surface aspects and morphology, and finally, all these were checked with ImageJ software for representative roughness parameters of the treated surfaces by brushing or incorporation. (3) Results: The prepared materials show different degrees of crystallinity and textural properties, and the dispersion of the material presents good stability in time in water/ethanol mixtures. Treatment with the LDH dispersion applied by brushing led to improvements in the mechanical properties (about a 5% increase in compressive strength), to an increased surface stability (about 30%), and to an improvement in the resistance to freeze–thaw cycles. The textural properties of the specimens’ materials were not altered by these treatments. (4) Conclusions: The order of the consolidation efficacity was CaMgAl-LDH > MgAl-LDH > CaAl-LDH, better for application by brushing than by incorporation.

Visible-Light-Active Zn–Fe Layered Double Hydroxide (LDH) for the Photocatalytic Conversion of Rice Husk Extract to Value-Added Products

One of the major causes of excess CO2 in the atmosphere is the direct burning of biomass waste, which can be obviated by the photocatalytic biomass conversion to useful/valuable chemicals/fuels, a sustainable and renewable approach. The present research work is focused on the development of a novel Zn–Fe LDH by a simple co-precipitation method and its utilization for the photocatalytic conversion of a rice husk extract (extracted from rice husk by means of pyrolysis) to value-added products. The synthesized, pure Zn–Fe LDH was characterized by various analytical techniques such as XRD, SEM, FTIR, and UV–Visible DRS spectroscopy. The rice husk extract was converted in a photocatalytic reactor under irradiation with 75 W white light, and the valued-added chemicals were analyzed by gas chromatography–mass spectrometry (GC–MS). It was found that the compounds in the rice husk extract before the photocatalytic reaction were mainly carboxylic acids, phenols, alcohols, alkanes (in a small amount), aldehydes, ketones, and amines. After the photocatalytic reaction, all the carboxylic acids and phenols were completely converted into alkanes by complex reactions. Hence, photocatalytic biomass conversion of a rice husk extract was successfully carried out in the present experimental work, opening new avenues for the development of related research domains, with a great potential for obtaining an alternate fuel and overcoming environmental pollution.

Novel Zn-Fe engineered kiwi branch biochar for the removal of Pb(II) from aqueous solution

In this study, a novel adsorbent made from kiwi branch biochar modified with Zn-Fe (KB/Zn-Fe) was compared with original biochar to the Pb(II)'s adsorptivity from waste water. The adsorbent was synthetized by liquid-phase deposition. Batches of sorption tests were performed, and the biochars' representative properties were tested. Characterizations revealed the physicochemical properties of biochars and showed that the KB/Zn-Fe composites were successfully synthesized. The Langmuir model and pseudo-second-order kinetic model were proven to satisfactorily fit the original biochar and KB/Zn-Fe. The KB/Zn-Fe showed Langmuir maximum adsorption ability to Pb (II) in aqueous solution of 161.29 mg g^-1, compared with 36.76 mg g^-1 for original biochar. The adsorption ability of Pb(II) decreased and the Pb(II) removal efficiency increased with increasing biochar dose. The effect of co-existence of NO₃^- to the absorptive capacity of KB/Zn-Fe on Pb(II) was unremarkable, but Cl^- could increase the absorptive capacity. Multiple Pb(II) adsorption mechanisms by KB/Zn-Fe include surface precipitation of metal hydroxides, complexation with active functional groups and ion-exchange. This work provides guidance for future production of biochar with efficient adsorption ability, which could be used to remove Pb(II) ions from wastewater.

Emerging 2D materials for antimicrobial applications in the pre- and post-pandemic era

Infectious diseases caused by viral or bacterial pathogens are one of the most serious threats to humanity. Moreover, they may lead to pandemics, as we have witnessed severely with the coronavirus disease 2019 (COVID-19). Nanotechnology, including technological developments of nano-sized materials, has brought great opportunities to control the spreading of such diseases. In the family of nano-sized materials, two-dimensional (2D) materials with intrinsic physicochemical properties can efficiently favor antimicrobial activity and maintain a safer environment to protect people against pathogens. For this purpose, they can be used alone or combined for the disinfection process of microbes, antiviral or antibacterial surface coatings, air filtering of medical equipment like face masks, or antimicrobial drug delivery systems. At the same time, they are promising candidates to deal with the issues of conventional antimicrobial approaches such as low efficacy and high cost. This review covers the antiviral or antibacterial activities of 2D materials and highlights their current and possible future applications. Considering their intrinsic properties, 2D materials will become part of the leading antimicrobial technologies for combating future pandemics anytime soon.

Hollow microspherical Bi2MoO6/Zn–Ti layered double hydroxide heterojunction for efficient visible-light photocatalytic degradation of organic contaminants

The construction of a Bi2MoO6/Zn–Ti layered double hydroxide heterojunction can effectively enhance the photocatalytic activity owing to efficient charge separation.

Graphene-based ZnCr layered double hydroxide nanocomposites as bactericidal agents with high sonophotocatalytic performances for degradation of rifampicin

Herein, ZnCr layered double hydroxide (ZnCr LDH), and its nanocomposites with GO and rGO were synthesized using the co-precipitation method. The samples were characterized using XRD, FT-IR, SEM, TEM, BET, and XPS techniques. The sonophotocatalytic activity of the ZnCr LDH, ZnCr LDH/GO, and ZnCr LDH/rGO was investigated via the degradation of rifampicin (RIF) in the ultrasonic bath under visible light irradiation. The synergy index of more than 1 determined for ZnCr LDH/rGO indicated the positive interaction of sonocatalysis and photocatalysis resulted by hybridizing the LDH nanosheets with rGO. The maximum sonophotocatalytic degradation efficiency of 87.3% was achieved in the presence of ZnCr LDH/rGO nanocomposite with the concentration of 1.5 g L^-1 for degradation of RIF with an initial concentration of 15 mg L^-1 within 60 min sonication under visible light irradiation. The addition of different scavengers indicated that hydroxyl radicals, superoxide anion radicals, and the generated holes played a dominant role in the degradation of the pollutant molecules. A possible degradation mechanism was suggested based on the intermediates. The antibacterial tests confirmed the higher antibacterial activity of ZnCr LDH/GO compared with ZnCr LDH and ZnCr LDH/rGO against Gram-positive Staphylococcus aureus.

New insight on some selected nanoparticles as an effective adsorbent toward diminishing the health risk of deltamethrin contaminated water

Deltamethrin is a widely used insecticide that kills a wide variety of insects and ticks. Deltamethrin resistance develops as a result of intensive, repeated use, as well as increased environmental contamination and a negative impact on public health. Its negative impact on aquatic ecology and human health necessitated the development of a new technique for environmental remediation and wastewater treatment, such as the use of nanotechnology. The co-precipitation method was used to create Zn-Fe/LDH, Zn-AL-GA/LDH, and Fe-oxide nanoparticles (NPs), which were then characterized using XRD, FT-IR, FE-SEM, and HR-TEM. The kinetic study of adsorption test revealed that these NPs were effective at removing deltamethrin from wastewater. The larval packet test, which involved applying freshly adsorbed deltamethrin nanocomposites (48 hours after adsorption), and the comet assay test were used to confirm that deltamethrin had lost its acaricidal efficacy. The kinetics of the deltamethrin adsorption process was investigated using several kinetic models at pH 7, initial concentration of deltamethrin 40 ppm and temperature 25°C. Within the first 60 min, the results indicated efficient adsorption performance in deltamethrin removal, the maximum adsorption capacity was 27.56 mg/L, 17.60 mg/L, and 3.06 mg/L with the Zn-Al LDH/GA, Zn-Fe LDH, and Fe Oxide, respectively. On tick larvae, the results of the freshly adsorbed DNC bioassay revealed larval mortality. This suggests that deltamethrin's acaricidal activity is still active. However, applying DNCs to tick larvae 48 hours after adsorption had no lethal effect, indicating that deltamethrin had lost its acaricidal activity. The latter result corroborated the results of the adsorption test's kinetic study. Furthermore, the comet assay revealed that commercial deltamethrin caused 28.51% DNA damage in tick cells, which was significantly higher than any DNC. In conclusion, the NPs used play an important role in deltamethrin decontamination in water, resulting in reduced public health risk. As a result, these NPs could be used as a method of environmental remediation.

Removal of Cu2+ metal ions from water using Mg-Fe layered double hydroxide and Mg-Fe LDH/5-(3-nitrophenyllazo)-6-aminouracil nanocomposite for enhancing adsorption properties

Herein, a new adsorbent was prepared by modifying Mg-Fe LDH for the removal of Cu²⁺ metal ions from wastewater. Mg-Fe LDH with 5-(3-nitrophenyllazo)-6-aminouracil ligand has been successfully prepared using direct co-precipitation methods and was fully characterized using FTIR analysis, X-ray diffraction, BET surface area theory, zeta potential, partial size, TGA/DTA, CHN, EDX, FESEM, and HRTEM. The surface areas of Mg-Fe LDH and Mg-Fe LDH/ligand were 73.9 m²/g and 34.7 m²/g respectively. Moreover, Cu²⁺ adsorption on LDH surfaces was intensively examined by adjusting different parameters like time, adsorbent dosage, pH, and Cu²⁺ metal ion concentration. Several isotherm and kinetic models were investigated to understand the mechanism of adsorption towards Cu²⁺ metal ions. Adsorption capacity values of LDH and ligand-LDH rounded about 165 and 425 mg/g respectively, applying nonlinear fitting of Freundlich and Langmuir isotherm equations showing that the ligand-LDH can be considered a potential material to produce efficient adsorbent for removal of heavy metal from polluted water. The adsorption of Cu²⁺ metal ions followed a mixed 1,2-order mechanism. The isoelectric point (PZC) of the prepared sample was investigated and discussed. The effect of coexisting cations on the removal efficiency of Cu²⁺ ions shows a minor decrease in the adsorption efficiency. Recyclability and chemical stability of these adsorbents show that using Mg-Fe LDH/ligand has an efficiency removal for Cu²⁺ ions higher than Mg-Fe LDH through seven adsorption/desorption cycles. Moreover, the recycling of the Cu²⁺ ions was tested using cyclic voltammetry technique from a neutral medium, and the Cu²⁺ ion recovery was 68%.

Exploitation of new approach to control of environmental pathogenic bacteria causing bovine clinical mastitis using novel anti-biofilm nanocomposite

New approaches are required for prevention and control of biofilm-producing bacteria and consequently mitigating the health problems of bovine clinical mastitis. This work designed to determine prevalence rates of biofilm-producing bacteria that causing bovine clinical mastitis and evaluate the anti-biofilm effectiveness of novel nanocomposite of zinc-aluminum layered double hydroxide intercalated with gallic acid (GA) as chelating agent (Zn-Al LDH/GA) on the prevention and control of environmental pathogenic bacteria; Escherichia coli (E. coli), Klebsiella pneumoniae (K. pneumoniae), Staphylococcus aureus (S. aureus), and Coagulase-negative staphylococci (CNS), besides Listeria monocytogenes (L. monocytogenes) and assess the ability to use as an antimicrobial agent, and/or sanitizer for milking equipment. All samples (n = 230) involved clinical mastitis cow's milk (n = 50) beside environmental samples (n = 180) were collected then examined for isolation and identification of bacterial pathogens. Zn-Al LDH/GA nanocomposite was synthesized using co-precipitation method, then characterized by Fourier-transform infrared spectroscopy (FT-IR); X-ray diffraction (XRD); field emission scanning electron microscopy (FESEM); high-resolution transmission electron microscopy (HRTEM); thermogravimetric analysis (TGA); differential thermal analysis (DTA); zeta potential; DLS analysis; and Brunauer, Emmett, and Teller (BET) surface area. The anti-biofilm activity of nanocomposite against mastitis-causing bacteria was detected using the broth micro-dilution and disc-diffusion assay. Results, the minimum concentration of Zn-Al LDH/GA that inhibited the growth of gram-positive and negative bacteria, were 312-625 and 5000 μg/mL, respectively. The LD₅₀ of Zn-Al LDH/GA was determined in mice at 1983.3 mg/kg b.wt. As a conclusion, Zn-Al LDH/GA nanocomposite proved its efficiency as an antimicrobial agent and/or sanitizer used for cleaning of milking equipment, due to it could inhibit the growth and multiplication of potentially pathogenic bacteria that causing clinical mastitis and its formation of biofilm on the milking equipment. Zn-Al LDH/GA was found to use under varying pH conditions compared with other commercial sanitizer used besides the formation of nanocomposite increases the material stability.

Sonophotocatalytic activities of FeCuMg and CrCuMg LDHs: Influencing factors, antibacterial effects, and intermediate determination

Herein, FeCuMg and CrCuMg layered double hydroxides (LDHs) were synthesized and their sonophotocatalytic activities toward Acid blue 113 (AB113) were compared. Sonolysis alone (only ultrasound) led to the decolorization efficiency of 13.0 %. A similar result was obtained in the case of the utilization of photolysis alone using a 10-W LED lamp (13.5 %). The adsorption process of AB113 onto both compounds was not efficient to significantly remove the target contaminant. The bandgap energy of 2.54 eV and 2.41 eV was calculated for FeCuMg and CrCuMg LDHs, respectively, indicating relatively higher photocatalytic activity of Cr-incorporated LDH than FeCuMg LDH. The sonophotocatalysis of AB113 (50 mg L^-1) over CrCuMg LDH (81.1 %) was more efficient than that of FeCuMg LDH (57.3 %) within the reaction time of 60 min. Intermediate byproducts of the sonophotocatalytic decomposition of organic dye over the as-synthesized tri-metal layered sonophotocatalysts were also identified. Furthermore, the antibacterial activity of both LDHs was evaluated by the CFU technique and the MBC and MIC values were determined. The antibacterial assessment confirmed the higher antibacterial activity of CrCuMg LDH than that of FeCuMg LDH against Staphylococcus aureus (S. aureus).

Zn/Fe LDH as a clay-like adsorbent for the removal of oxytetracycline from water: combining experimental results and molecular simulations to understand the removal mechanism

Pharmaceuticals are detected at trace levels in water. Their adverse effects on human health and aquatic ecosystems required novel pharmaceutical remediation methods for treating wastewater effluents. Layer double hydroxide (LDH) is abundantly available by simple preparation methods and with low costs. The extensive use of antibiotics nowadays leads to increasing the appearance of antibiotic resistance between bacteria and decreasing the effectiveness of antibiotics. In this work, the removal of one of these antibiotics named "oxytetracycline hydrochloride (OTC)" by Zn/Fe LDH was investigated. The Zn/Fe LDH before and after adsorption was characterized by X-ray diffraction, FT-IR analysis, zeta potential, particle size, BET surface area, HRTEM, FESEM, and XPS. The effects of different factors on the OTC adsorption performance were investigated. The removal percentage of OTC was 77.23% by Zn/Fe LDH. The isothermal and kinetic study of OTC adsorption was carried out at pH 6 at 25 °C using different models. The adsorption mechanism was investigated by Monte Carlo and molecular dynamic simulations.

Mg-Fe layered double hydroxide with chloride intercalated: synthesis, characterization and application for efficient nitrate removal

Mg-Fe layered double hydroxide intercalated with chloride (Mg-Fe-Cl LDH) was synthetized, characterized, and evaluated as adsorbent to remove nitrate from aqueous solution. The pH, initial nitrate concentration, adsorbent dosage, and particle size were investigated. Kinetic data was best represented by pseudo-second order model indicating that the rate limiting step was chemisorption. Intraparticle diffusion model indicates that adsorption kinetic is limited by external and intraparticle diffusion. Sips model was selected, based on R², ARE, and AIC, to adequately represent the adsorption isotherms, which permits to affirm that the adsorption occurs in heterogeneous surface, obtaining the maximum adsorption capacity of 18.17 mg.g^-1 at 30 ^oC. Thermodynamics parameters indicate that the adsorption was spontaneous, exothermic, and with structural modification. These findings come up with Mg-Fe-Cl LDH as a suitable adsorbent for nitrate and could contribute to its removal from the water and wastewater.

Prostate Cancer Cellular Uptake of Ternary Titanate Nanotubes/CuFe2O4/Zn-Fe Mixed Metal Oxides Nanocomposite

BACKGROUND

Certainly, there is a demand for stronger recognition of how nanoparticles can move through the cell membrane. Prostate cancer is one of the forcing sources of cancer-relevant deaths among men.

AIM OF THE WORK

The current research studied the power of prostate cancer cells to uptake a ternary nanocomposite TNT/CuFe2O4/Zn-Fe mixed metal oxides (MMO).

METHODOLOGY

The nanocomposite was synthesized by a chemical method and characterized by a High-resolution transmission electron microscope, Field emission scanning electron microscope, X-ray diffraction, Fourier transmission infra-red, X-ray photoelectron spectroscopy, dynamic light scattering. Besides, it was implemented as an inorganic anticancer agent versus Prostate cancer PC-3 cells.

RESULTS

The results revealed cellular uptake validity, cell viability reduction, ultra-structures alterations, morphological changes and membrane damage of PC-3 cells.

CONCLUSION

The prepared ternary nanocomposite was highly uptake by PC-3 cells and possessed cytotoxicity that was dose and time-dependent. To conclude, the study offered the potential of the investigated ternary nanocomposite as a promising prostate anticancer agent.

New Approach in Ulcer Prevention and Wound Healing Treatment using Doxycycline and Amoxicillin/LDH Nanocomposites

Doxycycline (DOX) and amoxicillin (AMOX) are important Broad-spectrum antibiotics used in treating multiple human and animal diseases. For the sake of exploring novel medical applications, both antibiotics were loaded into magnesium aluminium layer double hydroxide (Mg-Al)/LDH nanocomposite through the co-precipitation method. The synthesized materials were characterized by XRD, FT-IR, particle size analysis, FESEM and HRTEM. Acute toxicological studies were conducted using median lethal dose LD50, where a total number of 98 rats (200-150 gm) of both sexes were used. An experimental wound was aseptically incised on the anterior-dorsal side of each rat, while 98% of pure medical ethanol was used for ulcer induction. Acute toxicity, wound closure rate, healing percentages, ulcer index, protective rate and histopathological studies were investigated. Antibiotic Nanocomposites has significantly prevented ulcer formation and improved wound healing process to take shorter time than that of the typical processes, when compared with that of same drugs in microscale systems or commercial standard drugs. These results were confirmed by the histopathological findings. By converting it into the Nanoform, which is extremely important, especially with commonly used antibiotics, novel pharmacological properties were acquired from the antibiotics. The safe uses of DOX/LDH and AMOX/LDH Nanocomposites in this study were approved for biomedical applications.

Multifunctional Zn doped hollow mesoporous silica/polycaprolactone electrospun membranes with enhanced hair follicle regeneration and antibacterial activity for wound healing

Due to the complexity of the skin tissue structure, the regeneration of the entire skin, including skin appendages such as hair follicles, is a big challenge. In addition, skin trauma is often accompanied by bacterial infections that delay the wound healing. Therefore, developing wound dressings, which promote hair follicle regeneration and inhibit bacterial infection in the wound healing process, is of great clinical significance. In this study, Zn doped hollow mesoporous silica nanospheres (HMZS) were synthesized by a sol-gel method and a novel wound healing dressing was prepared by incorporation of drug ciprofloxacin hydrochloride (CiH)-loaded Zn containing mesoporous silica nanospheres (CiH-HMZS) into polycaprolactone (PCL) electrospun fibers. The CiH-HMZS/P nano-composite electrospun fibers exhibit the ability to promote angiogenesis and skin regeneration by releasing Si ions, and the activity to enhance hair follicle regeneration and inhibit bacterial growth by releasing zinc ions and achieve the synergistic antibacterial effect with both Zn ions and CiH in low concentrations. Thus, the CiH-HMZS/P nano-composite membrane is a promising multi-functional wound healing material for inhibiting bacterial growth in infected wounds and enhancing skin wound healing including hair follicle regeneration.

High and long-term antibacterial activity against Escherichia coli via synergy between the antibiotic penicillin G and its carrier ZnAl layered double hydroxide

Antibiotic-resistant bacterial infections are a global health problem. A commonly-used antibiotic Penicillin G was incorporated into ZnAl-layered double hydroxides (PNG/LDH) with a varied amount of PNG. PNG/LDH nanocomposites were well characterized in structure and composition using elemental analysis, X-ray diffraction pattern, Fourier transform infrared spectroscopy and TEM images, revealing that PNG were mostly adsorbed on the LDH surfaces at a lower PNG loading but some were intercalated into LDH interlayers at a higher PNG loading. The typical release profile of PNG and Zn²⁺ from PNG/LDH was a quick release, followed by a sustainable slow release. The antibacterial tests against Escherichia coli demonstrated that PNG/LDH with a suitable composition synergistically improved bacterial inhibition compared with free PNG and pristine LDHs. In specific, PNG/LDH with much higher cost-effectiveness showed a potent antimicrobial activity and maintained the activity for up to 10 days, significantly elongating the antibacterial effect compared with just 1 day for free PNG in the same conditions. Our results suggest suitable composition of nanoparticle carriers and antibiotics could significantly enhance antibacterial activity of antibiotics for a long period via the synergistic effect between carrier and antibiotics, a potential approach to overcome the bacterial resistance to antibiotics.

Removal of safranin dye from water using polypyrrole nanofiber/Zn-Fe layered double hydroxide nanocomposite (Ppy NF/Zn-Fe LDH) of enhanced adsorption and photocatalytic properties

Polypyrrole nanofiber/Zn-Fe layered double hydroxide (Ppy NF/Zn-Fe LDH) was synthesized as nanocomposite of enhanced adsorption and photocatalytic properties. The formation of the composite was confirmed by XRD, FT-IR, HSEM, HRTEM, BET surface area and UV-vis spectrophotometer. Ppy NF/Zn-Fe LDH composite exhibits clear enhancing in the specific surface area and obvious reducing in the band gap energy (from 2.8 eV for Zn-Fe LDH to 2.31 eV for the composite). This was reflected in a considerable improvement in the adsorption capacity and photocatalytic removal of safranin dye. The adsorption capacity was enhanced by about 22% higher than Ppy NF and by 31% higher than Zn-Fe LDH. The photocatalytic removal was improved by 41.6% higher than Ppy NF and by about 54% higher than Zn-Fe LDH. The adsorption of safranin dye by the composite is chemisorption adsorption and occurs in a multilayer form. The complete photocatalytic removal of 5 mg/L of safranin dye can be achieved after 120 min illumination time using 0.05 g of the composite as photocatalyst and the best results can be obtained at neutral to alkaline conditions. Realistic application of the composite for the removal of dye from raw water samples revealed the applicability of the product for the purification of tap water, groundwater, and sewage water. Moreover, it can be used for six cycles of safranin dye removal from water. The photocatalytic degradation process appears to be controlled by the created hydroxyl radicals and formed photogenerated holes as the dominant active oxidizing radicals.

Synthesis and evaluation of layered double hydroxide/doxycycline and cobalt ferrite/chitosan nanohybrid efficacy on gram positive and gram negative bacteria

The current study tested the antibacterial activity of layered double hydroxide (LDH), LDH-Doxycycline nanohybrid, Cobalt ferrite nanoparticles (NPs) and Cobalt ferrite-Chitosan nanohybrid against Gram-negative bacteria Escherichia coli. In addition, the study investigated the Cobalt ferrite NPs and Cobalt ferrite-Chitosan nanohybrids against Gram-positive bacteria Staphylococcus aureus. The nanoparticles and nanohybrids were synthesized by a chemical method and characterized by high resolution transmission electron microscope (HRTEM), X-ray diffraction (XRD), and Fourier transformation Infra-red Spectroscopy (FTIR). Multi-point Brunauer-Emmet-Teller (BET) method determined the specific surface area while Barrett-Joyner-Halenda for (BJH) figured the corresponding specific pore volume and pore size and Zetasizer ranked the particle size distribution. Minimum inhibitory concentration (MIC) and the minimum bactericidal concentration (MBC) measurements besides agar well diffusion method showed the antimicrobial activity of the nanoparticles. The results revealed no antibacterial activity of the LDH and Cobalt ferrite NPs alone. Meanwhile, the Cobalt ferrite-Chitosan nanohybrid and LDH-Doxycycline showed a high activity antibacterial effect.

Interactions between Biological Cells and Layered Double Hydroxides: Towards Functional Materials

This review highlights the current research on the interactions between biological cells and Layered Double Hydroxides (LDH). The as-prepared biohybrid materials appear extremely attractive in diverse fields of application relating to health care, environment and energy production. We describe how thanks to the main features of biological cells and LDH layers, various strategies of assemblies can be carried out for constructing smart biofunctional materials. The interactions between the two components are described with a peculiar attention to the adsorption, biocompatibilization, LDH layer internalization, antifouling and antimicrobial properties. The most significant achievements including authors' results, involving biological cells and LDH assemblies in waste water treatment, bioremediation and bioenergy generation are specifically addressed.

An efficient adsorption of indigo carmine dye from aqueous solution on mesoporous Mg/Fe layered double hydroxide nanoparticles prepared by controlled sol-gel route

A new approach for removal of indigo carmine blue (IC) dye which is extensively used in jeans manufacture was successfully performed on novel mesoporous [LDH] nanoparticles prepared by sol-gel route using CTAB as shape and pore directing agent. The physicochemical features were monitored by X-ray diffraction (XRD), Fourier transformer infra-red (FTIR), N₂ adsorption-desorption isotherm, Field emission electron microscope (FESEM) and high resolution transmission electron microscope (HRTEM). The influence of reaction parameters affecting dye adsorption including contact time, initial dye concentration, pH and temperature were investigated. Textural analysis and HRTEM images indicate the existence of mesoporous spherical nanoparticles of size = 26 nm connected to each other's and embedded large numbers of mesopores of average pore radius = 43.5 Å. A successful adsorption of IC on LDH nanoparticles of surface area = 85.6 m²/g at various pH with maximum adsorption capacity = 62.8 mg/g at pH = 9.5. Langmuir model is more favorable to describe the adsorption of IC rather than Freundlich model which reflecting the preferential formation of monolayer on the surface of LDH. Both film diffusion and the intraparticle diffusion affect the dye adsorption. The values of enthalpy change (ΔH) for and (ΔS) are + 28.18 and + 0.118 kJ/mol, respectively indicating that the removal process is endothermic. The results indicated that LDH nanoparticles conserved a good activity even after five consecutive cycles of reuse. Our results suggest that mesoporous LDH nanoparticles are considered a potential novel adsorbent for remediation of wastewater containing IC.