Characterisation, in vitro release study, and antibacterial activity of montmorillonite-gentamicin complex material

Investigation of Tannic Acid Crosslinked PVA/PEI-Based Hydrogels as Potential Wound Dressings with Self-Healing and High Antibacterial Properties

This study developed hydrogels containing different ratios of TA using polyvinyl alcohol (PVA) and polyethyleneimine (PEI) polymers crosslinked with tannic acid (TA) for the treatment of burn wounds. Various tests, such as scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FTIR), swelling, moisture retention, contact angle, tensile strength, the scratch test, antibacterial activity and the in vitro drug-release test, were applied to characterize the developed hydrogels. Additionally, the hydrogels were examined for cytotoxic properties and cell viability with the WST-1 test. TA improved both the self-healing properties of the hydrogels and showed antibacterial activity, while the added gentamicin (GEN) further increased the antibacterial activities of the hydrogels. The hydrogels exhibited good hydrophilic properties and high swelling capacity, moisture retention, and excellent antibacterial activity, especially to S. aureus. In addition, the swelling and drug-release kinetics of hydrogels were investigated, and while swelling of hydrogels obeyed the pseudo-second-order modeling, the drug release occurred in a diffusion-controlled manner according to the Higuchi and Korsmeyer-Peppas models. These results show that PVA/PEI-based hydrogels have promising potential for wound dressings with increased mechanical strength, swelling, moisture retention, self-healing, and antibacterial properties.

Optimized Electrophoretic Deposition of Chitosan/Mesoporous Glass Nanoparticles with Gentamicin on Titanium Implants: Enhancing Hemocompatibility and Antibacterial Activity

Titanium-based implants have long been studied and used for applications in bone tissue engineering, thanks to their outstanding mechanical properties and appropriate biocompatibility. However, many implants struggle with osseointegration and attachment and can be vulnerable to the development of infections. In this work, we have developed a composite coating via electrophoretic deposition, which is both bioactive and antibacterial. Mesoporous bioactive glass particles with gentamicin were electrophoretically deposited onto a titanium substrate. In order to validate the hypothesis that the quantity of particles in the coatings is sufficiently high and uniform in each deposition process, an easy-to-use image processing algorithm was designed to minimize human dependence and ensure reproducible results. The addition of loaded mesoporous particles did not affect the good adhesion of the coating to the substrate although roughness was clearly enhanced. After 7 days of immersion, the composite coatings were almost dissolved and released, but phosphate-related compounds started to nucleate at the surface. With a simple and low-cost technique like electrophoretic deposition, and optimized stir and suspension times, we were able to synthesize a hemocompatible coating that significantly improves the antibacterial activity when compared to the bare substrate for both Gram-positive and Gram-negative bacteria.

Dual Functional Antibacterial-Antioxidant Core/Shell Alginate/Poly(ε-caprolactone) Nanofiber Membrane: A Potential Wound Dressing

Core/shell nanofibers offer the advantage of encapsulating multiple drugs with different hydrophilicity in the core and shell, thus allowing for the controlled release of pharmaceutic agents. Specifically, the burst release of hydrophilic drugs from such fiber membranes causes an instantaneous high drug concentration, whereas a long and steady release is usually desired. Herein, we tackle the problem of the initial burst release by the generation of core/shell nanofibers with the hydrophilic antibiotic drug gentamycin loaded within a hydrophilic alginate core surrounded by a hydrophobic shell of poly(ε-caprolactone). Emulsion electrospinning was used as the nanofibrous mesh generation procedure. This process also allows for the loading of a hydrophobic compound, where we selected a natural antioxidant molecule, betulin (BTL), to detoxify the radicals. The resulting nanofibers exhibited a cylindrical shape with a core/shell structure. In vitro tests showed a controlled release of gentamicin from nanofibers via diffusion. The drug reached 93% release in an alginate hydrogel film but only 50% release in the nanofibers, suggesting its potential to minimize the initial burst release. Antibacterial tests revealed significant activity against both Gram-negative and Gram-positive bacteria. The antioxidant property of betulin was confirmed through the DPPH assay, where the incorporation of 20% BTL revealed 37.3% DPPH scavenging. The nanofibers also exhibited favorable biocompatibility in cell culture studies, and no harmful effects on cell viability were observed. Overall, this research offers a promising approach to producing core/shell nanofibrous mats with antibacterial and antioxidant properties, which could effectively address the requirements of wound dressings, including infection prevention and wound healing acceleration.

Hierarchical antibiotic delivery system based on calcium phosphate cement/montmorillonite-gentamicin sulfate with drug release pathways

Antibiotic-loaded calcium phosphate cement (CPC) has emerged as a promising biomaterial for drug delivery in orthopedics. However, there are problems such as the burst release of antibiotics, low cumulative release ratio, inappropriate release cycle, inferior mechanical strength, and poor anti-collapse properties. In this research, montmorillonite-gentamicin (MMT-GS) was fabricated by solution intercalation method and served as the drug release pathways in CPC to avoid burst release of GS, achieving promoted cumulative release ratios and a release cycle matched the time of inflammatory response. The results indicated that the highest cumulative release ratio and release concentration of GS in CPC/MMT-GS was 94.1 ± 2.8 % and 1183.05 μg/mL, and the release cycle was up to 504 h. In addition, the hierarchical GS delivery system was divided into three stages, and the kinetics followed the Korsmeyer-Peppas model, the zero-order model, and the diffusion-dissolution model, respectively. Meanwhile, the compressive strength of CPC/MMT-GS was up to 51.33 ± 3.62 MPa. Antibacterial results demonstrated that CPC/MMT-GS exhibited excellent in vitro long-lasting antibacterial properties to E. coli and S. aureus. Furthermore, CPC/MMT-GS promoted osteoblast proliferation and exhibited excellent in vivo histocompatibility. Therefore, CPC/MMT-GS has favorable application prospects in the treatment of bone defects with bacterial infections and inflammatory reactions.

Functionalized Halloysite Nanotubes as Potential Drug Carriers

The aim of the work was to examine the possibility of using modified halloysite nanotubes as a gentamicin carrier and to determine the usefulness of the modification in terms of the effect on the amount of the drug attached, its release time, but also on the biocidal properties of the carriers. In order to fully examine the halloysite in terms of the possibility of gentamicin incorporating, a number of modifications of the native halloysite were carried out prior to gentamicin intercalation with the use of sodium alkali, sulfuric and phosphoric acids, curcumin and the process of delamination of nanotubes (expanded halloysite) with ammonium persulfate in sulfuric acid. Gentamicin was added to unmodified and modified halloysite in an amount corresponding to the cation exchange capacity of pure halloysite from the Polish Dunino deposit, which was the reference sample for all modified carriers. The obtained materials were tested to determine the effect of surface modification and their interaction with the introduced antibiotic on the biological activity of the carrier, kinetics of drug release, as well as on the antibacterial activity against Escherichia coli Gram-negative bacteria (reference strain). For all materials, structural changes were examined using infrared spectroscopy (FTIR) and X-ray diffraction (XRD); thermal differential scanning calorimetry with thermogravimetric analysis (DSC/TG) was performed as well. The samples were also observed for morphological changes after modification and drug activation by transmission electron microscopy (TEM). The conducted tests clearly show that all samples of halloysite intercalated with gentamicin showed high antibacterial activity, with the highest antibacterial activity for the sample modified with sodium hydroxide and intercalated with the drug. It was found that the type of halloysite surface modification has a significant effect on the amount of gentamicin intercalated and then released into the surrounding environment but does not significantly affect its ability to further influence drug release over time. The highest amount of drug released among all intercalated samples was recorded for halloysite modified with ammonium persulfate (real loading efficiency above 11%), for which high antibacterial activity was found after surface modification, before drug intercalation. It is also worth noting that intrinsic antibacterial activity was found for non-drug-intercalated materials after surface functionalization with phosphoric acid (V) and ammonium persulfate in the presence of sulfuric acid (V).

Co-exchanged montmorillonite: a potential antibacterial agent with good antibacterial activity and cytocompatibility

As a biocompatible material with rich resources and economic benefits, montmorillonite (MMT) has been widely used in the antibacterial field as a drug carrier and toxin adsorbent. In addition, the distinctive structure of MMT provides a possibility to tune its property in a wide range through ion-exchange. In this study, Co-montmorillonite (CoMMT) was prepared by the ion-exchanging method in a Co(NO₃)₂ solution and its antibacterial activity and cytocompatibility were investigated. The results showed that Co was introduced into MMT successfully and led to an increase in the interlayer spacing of MMT. Also, CoMMT showed a morphology of irregular aggregates consisting of stacked and intertwined lamellae with a uniform cobalt distribution. Besides, CoMMT had better dispersity and higher specific surface area than unmodified MMT. The antibacterial test results showed that CoMMT had good antibacterial activity against S. aureus and E. coli when the CoMMT concentration was higher than 0.2 mg mL^-1 and 0.4 mg mL^-1, respectively. The possible antibacterial mechanism of CoMMT was speculated and verified by a combination of SEM and EDS results. In addition, CoMMT showed no obvious cytotoxicity to MC3TC-E1 at the observed antibacterial concentration. These findings demonstrated that CoMMT with good biocompatibility and antibacterial activity could be used as a novel antibacterial agent for tissue engineering.

An Overview on the Recent Advances in the Treatment of Infected Wounds: Antibacterial Wound Dressings

A wound can be surgical, cuts from an operation or due to accident and trauma. The infected wound, as a result of bacteria growth within the damaged skin, interrupts the natural wound healing process and significantly impacts the quality of life. Wound dressing is an important segment of the skincare industry with its economic burden estimated at $ 20.4 billion (in 2021) in the global market. The results of recent clinical trials suggest that the use of modern dressings can be the easiest, most accessible, and most cost-effective way to treat chronic wounds and, hence, holds significant promise. With the sheer number of dressings in the market, the selection of correct dressing is confusing for clinicians and healthcare workers. The aim of this research was to review widely used types of antibacterial wound dressings, as well as emerging products, for their efficiency and mode of action. In this review, we focus on introducing antibiotics and antibacterial nanoparticles as two important and clinically widely used categories of antibacterial agents. The perspectives and challenges for paving the way for future research in this field are also discussed. This article is protected by copyright. All rights reserved.

Copper/Zinc-Modified Palygorskite Protects Against Salmonella Typhimurium Infection and Modulates the Intestinal Microbiota in Chickens

Palygorskite (Pal), a clay nanoparticle, has been demonstrated to be a vehicle for drug delivery. Copper has antibacterial properties, and zinc is an essential micronutrient for intestinal health in animals and humans. However, whether copper/zinc-modified Pal (Cu/Zn-Pal) can protect chickens from Salmonella enterica subsp. enterica serovar Typhimurium (S. Typhimurium) infection remains unclear. In this study, three complexes (Cu/Zn-Pal-1, Cu/Zn-Pal-2, and Cu/Zn-Pal-3) were prepared, and Cu/Zn-Pal-1 was shown to be the most effective at inhibiting the growth of S. Typhimurium in vitro, whereas natural Pal alone had no inhibitory effect. In vivo, Cu/Zn-Pal-1 reduced S. Typhimurium colonization in the intestine of infected chickens and relieved S. Typhimurium-induced organ and intestinal mucosal barrier damage. Moreover, this reduction in Salmonella load attenuated intestinal inflammation and the oxidative stress response in challenged chickens. Additionally, Cu/Zn-Pal-1 modulated the intestinal microbiota in infected chickens, which was characterized by the reduced abundance of Firmicutes and the increased abundance of Proteobacteria and Bacteroidetes. Our results indicated that the Cu/Zn-Pal-1 complex may be an effective feed supplement for reducing S. Typhimurium colonization of the gut.

Effects of Montmorillonite and Gentamicin Addition on the Properties of Electrospun Polycaprolactone Fibers

Electrospinning was used to obtain multifunctional fibrous composite materials with a matrix of poly-ɛ-caprolactone (PCL) and 2 wt.% addition of a nanofiller: montmorillonite (MMT), montmorillonite intercalated with gentamicin sulphate (MMTG) or gentamicin sulphate (G). In the first stage, the aluminosilicate gallery was modified by introducing gentamicin sulfate into it, and the effectiveness of the intercalation process was confirmed on the basis of changes in the clay particle size from 0.5 µm (for MMT) to 0.8 µm (for MMTG), an increase in the interplanar distance d₀₀₁ from 12.3 Å (for MMT) to 13.9 Å (for MMTG) and altered clay grain morphology. In the second part of the experiment, the electrospinning process was carried out in which the polymer nonwovens with and without the modifier were prepared directly from dichloromethane (DCM) and N,N-dimethylformamide (DMF). The nanocomposite fibrous membranes containing montmorillonite were prepared from the same polymer solution but after homogenization with the modifier (13 wt.%). The degree of dispersion of the modifier was evaluated by average microarray analysis from observed area (EDS), which was also used to determine the intercalation of montmorillonite with gentamicin sulfate. An increase in the size of the fibers was found for the materials with the presence of the modifier, with the largest diameters measured for PCL_MMT (625 nm), and the smaller ones for PCL_MMTG (578 nm) and PCL_G (512 nm). The dispersion of MMT and MMTG in the PCL fibers was also confirmed by indirect studies such as change in mechanical properties of the nonwovens membrane, where the neat PCL nonwoven was used as a reference material. The addition of the modifier reduced the contact angle of PCL nonwovens (from 120° for PCL to 96° for PCL_G and 98° for PCL_MMTG). An approximately 10% increase in tensile strength of the nonwoven fabric with the addition of MMT compared to the neat PCL nonwoven fabric was also observed. The results of microbiological tests showed antibacterial activity of all obtained materials; however, the inhibition zones were the highest for the materials containing gentamicin sulphate, and the release time of the active substance was significantly extended for the materials with the addition of montmorillonite containing the antibiotic. The results clearly show that the electrospinning technique can be effectively used to obtain nanobiocomposite fibers with the addition of nonintercalated and intercalated montmorillonite with improved strength and increased stiffness compared to materials made only of the polymer fibers, provided that a high filler dispersion in the spinning solution is obtained.

Periodic charge matching driven immobilization of gentamicin in nanoclays for stable and long-term antibacterial coating

Matching of charge periodicity between a guest and a host enabled effective immobilization of highly water-soluble antibiotic drug, gentamicin C, in a bentonite clay by cation exchange. X-ray diffraction, infrared spectroscopy and CHNS analysis revealed the immobilization manner of gentamicin C, which was immobilized between bentonite layers via periodic charge-charge interaction with tilted arrangement, as a trication. Both gentamicin alone and a gentamicin/bentonite hybrid were coated onto a polyurethane substrate using water-borne polyurethane binder. The antibiotic character of both films was investigated as prepared or after immersion in phosphate-buffered saline till 5 days against E. coli and B. subtilis bacteria. It was clearly shown that the gentamicin/bentonite hybrid-coated film showed sustained antibacterial efficacy even after exposure to phosphate-buffered saline, while gentamicin only-coated film gradually lost its performance under the same condition.

Quaternized Chitosan-Coated Montmorillonite Interior Antimicrobial Metal-Antibiotic in Situ Coordination Complexation for Mixed Infections of Wounds

Conventional drug delivery systems for natural clay materials still face critical challenges in their practical application, including multiple bacterial infections, combined infection of bacteria and fungi, and low sterilization efficiency. In this work, we address these challenges using the multifunctional montmorillonite nanosheet-based (MMT-based) drug nanoplatform, which involves the antibiotic 5-fluorocytosine (5-FC), antibacterial metal copper ions, and quaternized chitosan (QCS). Composite material QCS/MMT/5-FCCu can can strongly inhibit Staphylococcus aureus (a typical Gram-positive bacterium), Escherichia coli (a typical Gram-negative bacterium), and Candida albicans (a fungus) because 5-FC coordinates with copper ions in situ and due to the deposition of QCS. The subsequent drug release behavior of 5-FCCu was studied, and the results show an initial high concentration kills microorganisms and long-acting sustained release inhibition. Moreover, in vivo wound experiments and toxicity experiments show the promotion of wound healing and excellent biocompatibility. As a demonstration of the utility of the latter, we have shown that the MMT-based smart platform can be used for the treatment of mixed infections of wounds.

Corrosion resistance and antibacterial activity of zinc-loaded montmorillonite coatings on biodegradable magnesium alloy AZ31

A Zinc-loaded montmorillonite (Zn-MMT) coating was hydrothermally prepared using Zn²⁺ ion intercalated sodium montmorillonite (Na-MMT) upon magnesium (Mg) alloy AZ31 as bone repairing materials. Biodegradation rate of the Mg-based materials was studied via potentiodynamic polarization curves, electrochemical impedance spectroscopy (EIS) and hydrogen evolution tests. Results revealed that both Na-MMT and Zn-MMT coatings exhibited better corrosion resistance in Dulbecco's modified eagle medium (DMEM) + 10% calf serum (CS) than bare Mg alloy AZ31 counterparts. Hemolysis results demonstrated that hemocompatibility of the Na-MMT and Zn-MMT coatings were 5%, and lower than that of uncoated Mg alloy AZ31 pieces. In vitro MTT tests and live-dead stain of osteoblast cells (MC3T3-E1) indicated a significant improvement in cytocompatibility of both Na-MMT and Zn-MMT coatings. Antibacterial properties of two representative bacterial strains associated with device-related infection, i.e. Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus), were employed to explore the antibacterial behavior of the coatings. The measured inhibitory zone and bacterial growth rate confirmed that Zn-MMT coatings exhibited higher suppression toward both E. coli and S. aureus than that of Na-MMT coatings. The investigation on antibacterial mechanism through scanning electron microscopy (SEM) and lactate dehydrogenase (LDH) release assay manifested that Zn-MMT coating led to severe breakage of bacterial membrane of E. coli and S. aureus, which resulted in a release of cytoplasmic materials from the bacterial cells. In addition, the good inhibition of Zn-MMT coatings against E. coli and S. aureus might be attributed to the slow but sustainable release of Zn²⁺ ions (up to 144 h) from the coatings into the culture media. This study provides a novel coating strategy for manufacturing biodegradable Mg alloys with good corrosion resistance, biocompatibility and antibacterial activity for future orthopedic applications. STATEMENT OF SIGNIFICANCE: The significance of the current work is to develop a corrosion-resistant and antibacterial Zn-MMT coating on magnesium alloy AZ31 through a hydrothermal method. The Zn-MMT coating on magnesium alloy AZ31 shows better corrosion resistance, biocompatibility and excellent antibacterial ability than magnesium alloy AZ31. This study provides a novel coating on Mg alloys for future orthopedic applications.

Impact of tetracycline-clay interactions on bacterial growth

Antibiotics are extremely effective against bacterial infections due to their selective toxicity for bacteria rather than the host. Extensive use and misuse of antibiotics resulted in significant increases in antibiotic levels in aquatic and soil environments. Bacteria exposed to antibiotics with low concentrations may develop antibiotic resistance. In this study a swelling 2:1 clay mineral montmorillonite (MMT) and a non-swelling 1:1 clay mineral kaolinite were premixed with tetracycline (TC) of varying concentrations. The gram-negative bacteria Escherichia coli (E. coli) and Salmonella enterica (S. enterica) of both TC sensitive and TC resistant strains were tested for their growth in the presence TC-loaded clay minerals of different amounts and under different physico-chemical conditions. The antimicrobial activity of TC was significantly decreased in the presence of MMT. In the absence of MMT, no bacteria growth was found at a TC concentration 0.25mg/mL and above. On the contrast, in the presence of MMT, 50% growth was still found for a TC resistant E. coli at a TC concentration of 5mg/g. The influence of kaolinite was to a lesser degree. These results suggest that antimicrobial agents present in clayey soils could be responsible for possible mutation of bacteria of high antibiotic resistance.

Research on 5-fluorouracil as a drug carrier materials with its in vitro release properties on organic modified magadiite

The magadiite (MAG) was modified by cetyltrimethyl ammonium-Bromide (CTAB) and then further modified by Chitosan (CS) which is called organic modified-magadiite as magadiite-cetyltrimethyl ammonium bromide (MAG-CTAB) and magadiite-cetyltrimethyl ammonium bromide-Chitosan (MAG-CTAB-CS), respectively, in this research study. The MAG, MAG-CTAB, and MAG-CTAB-CS were used as 5-Fluorouracil (5-FU) drug carrier materials; the drug carrier's materials were marked as magadiite-5-Fluorouracil (MAG/5-FU), magadiite-cetyltrimethyl ammonium bromide-5-Fluorouracil (MAG-CTAB/5-FU), and magadiite-cetyltrimethyl ammonium bromide-Chitosan (MAG-CTAB-CS/5-FU). X-ray diffraction(XRD, Flourier transform infrared spectrometry (FTIR) and scanning electron microscopy (SEM) results were shown that 5-Fluorouracil was combined with carrier materials through physical apparent adsorption, ion exchange, chemical bond, hydrogen bond, and electrostatic interaction. The drug carriers in vitro release behavior in simulated gastric fluids (SGF，pH = 1.35) and intestinal fluids (SIF，pH = 7.40) were investigated. The drug loading capacity and accumulated release ration were as follows the order: MAG-CTAB-CS/5-FU > MAG-CTAB/5-FU > MAG/5-FU. The drug loading capacity of MAG-CTAB-CS/5-FU was 162.29 mg/g, 48 h later the drug accumulated release ratio was 61.24%, and the release amount was 97.52 mg/g for 24 h. Korsmeyer-Peppas model and First order model were found to be suitable to describe the vitro release behavior of 5-Fluorouracil. This would be an economically viable and efficient method for the preparation of advanced drug delivery system.

Functional Carboxymethylcellulose/Zein Bionanocomposite Films Based on Neomycin Supported on Sepiolite or Montmorillonite Clays

The present work introduces new functional bionanocomposite materials based on layered montmorillonite and fibrous sepiolite clays and two biopolymers (carboxymethylcellulose polysaccharide and zein protein) to produce drug-loaded bionanocomposite films for antibiotic topical delivery. Neomycin, an antibiotic indicated for wound infections, was employed as the model drug in this study. The physical properties and the antimicrobial activity of these materials were evaluated as a function of the type of hybrid and the amount of zein protein incorporated in the bionanocomposite films. In addition, the interfacial and physicochemical properties of these new clay-drug hybrids have been studied through a combination of experimental and computational methodologies, where the computational studies confirm the intercalation of neomycin into the montmorillonite layers and the possible penetration of the drug in the tunnels of sepiolite, as pointed out by N2 adsorption and X-ray diffraction techniques. The antimicrobial activity of these bionanocomposite materials show that the films based on montmorillonite-neomycin display a more pronounced inhibitory effect of the bacterial growth than those prepared with the sepiolite-neomycin hybrid. Such effect can be related to the difficult release of neomycin adsorbed on sepiolite due to a strong interaction between both components.

Sustained antibacterial activity of berberine hydrochloride loaded supramolecular organoclay networks with hydrogen-bonding junctions

The environmental risk from antibiotics is an issue of increasing concern. So, carboxymethyl β-cyclodextrin-functionalized montmorillonite nanosheets were for the first time successfully synthesized through a cheap, environmentally friendly and scalable approach and confirmed by FTIR, XRD and TGA. FE-SEM investigation showed that the resulting functional material could be further self-assembled into dense supramolecular organoclay networks (D-networks). The antibacterial properties of the D-networks loaded with natural berberine hydrochloride (BBH) were investigated toward E. coli and S. aureus by using colony growth on agar plates, bacterial growth curves based on optical densities, and confocal and fluorescence microscopy. Our studies demonstrated that the BBH loaded D-network antibacterial activity was concentration dependent and significantly exceeded that of free BBH. FE-SEM observation confirmed that E. coli and S. aureus can directly contact the D-networks and confocal and fluorescence microscopy showed that free BBH was only very poorly internalized, while the BBH released from the BBH-loaded D-network could be internalized efficiently into bacterial cells, resulting in an increment of the intracellular BBH level compared with the free BBH group. Time-dependent antibacterial activity was observed and it was found that the BBH-loaded D-network dispersion at the BBH dosage of 600 μg mL^-1 almost completely suppressed the growth of E. coli, leading to a viability loss of up to 98.45 ± 1.22%, while the BBH-loaded D-network dispersion at the BBH concentration of 250 μg mL^-1 exhibited a growth inhibition of 97.81 ± 0.83% toward S. aureus over three days. Our results suggest that supramolecular organoclay networks, in the future, may function as promising antibacterial drug carrier systems to promote BBH delivery in E. coli and S. aureus, which can reduce the environmental risk of antibiotics.

Study on montmorillonite-chlorhexidine acetate-terbinafine hydrochloride intercalation composites as drug release systems

This paper focuses on the intercalation of chlorhexidine acetate (CA) and terbinafine hydrochloride (TBH) into montmorillonite as sustained release drug carriers. The intercalation compounds were characterized by X-ray diffraction (XRD), Fourier transform infrared (FT-IR) spectroscopy, and thermogravimetric analysis (TGA). The basal spacing of montmorillonite increased from 1.23 to 2.97 nm. It was confirmed that CA and TBH molecules were well-stabilized in the interlayer space of clay via mono-, double or triplicate layer stacking. The adsorption amounts and molecular structures of CA and TBH appeared to depend on the cation exchange capacity of MMT, which in turn, tailored the drug release patterns. In vitro release tests of MMT-CA-TBH in 0.9 wt% NaCl solution at 37 °C show a biphasic and sustained profile of CA and TBH ion release. After release, dissolution-diffusion kinetic models were fitted. The mechanism of MMT-CA-TBH release is probably due to surface diffusion and bulk diffusion via ionic exchange of MMT ions on or in the MMT with ions in the NaCl solution. The in vitro release experiments revealed that CA and TBH were released from MMT steadily, depending on the cooperation between the drugs themselves and the electrostatic interactions between the drugs and MMT. It was found that the cross-linking ratio increased due to a decrease in the free volume available for diffusion.

Copper/zinc-loaded montmorillonite influences intestinal integrity, the expression of genes associated with inflammation, TLR4-MyD88 and TGF-β1 signaling pathways in weaned pigs after LPS challenge

This study was aimed at investigating whether dietary copper/zinc-loaded montmorillonite (Cu/Zn-Mt) could alleviate Escherichia coli LPS-induced intestinal injury through pro- and anti-inflammatory signaling pathways (TLRs, NLRs and TGF-β1) in weaned piglets. Eighteen 21-d-old pigs were randomly divided into three groups (control, LPS and LPS + Cu/Zn-Mt). After 21 d of feeding, pigs in the LPS group and LPS + Cu/Zn-Mt group received i.p. administration of LPS, whereas pigs in the control group received saline. At 4 h post-injection, jejunum samples were collected for analysis. The results indicated that, compared with the LPS group, supplemental Cu/Zn-Mt increased transepithelial electrical resistance, the expressions of anti-inflammatory cytokines (TGF-β1) in mRNA and protein levels, and decreased FD4 and the mRNA expression of pro-inflammatory cytokines (TNF-α, IL-6, IL-8 and IL-1β). The pro-inflammatory signaling pathways results demonstrated that Cu/Zn-Mt supplementation decreased the mRNA levels of TLR4 and its downstream signals (MyD88, IRAK1, TRAF6) but had no effect on NOD1 and NOD2 signals. Cu/Zn-Mt supplementation did not affect NF-κB p65 mRNA abundance, but down-regulated its protein expression. The anti-inflammatory signaling pathways results showed supplemental Cu/Zn-Mt also increased TβRII, Smad4 and Smad7 mRNA expressions. These findings suggested dietary Cu/Zn-Mt attenuated LPS-induced intestinal injury by alleviating intestinal inflammation, influencing TLR4-MyD88 and TGF-β1 signaling pathways in weaned pig.