Evaluation of cationic core-shell thermoresponsive poly(N-vinylcaprolactam)-based microgels as potential drug delivery nanocarriers

Development, Characterization, and Evaluation of Potential Systemic Toxicity of a Novel Oral Melatonin Formulation

The need to create safe materials for biomedical and pharmaceutical applications has become a significant driving force for the development of new systems. Therefore, a chitosan-coated copolymer of itaconic acid, acrylic acid, and N-vinyl caprolactam (IT-AA-NVC) was prepared by radical polymerization and subsequent coating via nanoprecipitation to give a system capable of sustained delivery of melatonin. Although melatonin brings undoubted benefits to the human body, aspects of the optimal dose, route, and time of administration for the obtaining of suitable treatment outcomes remain under discussion. The entrapment of melatonin in biocompatible polymeric systems can prevent its oxidation, decrease its toxicity, and provide an increased half-life, resulting in an enhanced pharmacokinetic profile with improved patient compliance. The structures of the biopolymer and conjugate were proven by FTIR, thermal properties were tested by DSC, and the morphologies were followed by SEM. The loading efficiency and in vitro release profile were studied by means of HPLC, and a delayed release profile with an initial burst was obtained. The potential systemic toxicity of the formulation was studied in vivo; a mild hepatotoxicity was observed following administration of the melatonin-loaded formulation to mice, both by histopathology and blood clinical biochemistry. Histopathology showed a mild nephrotoxicity as well; however, kidney clinical biochemistry did not support this.

Tominaga T, Moretti Bonadio TG, P. da Silveira N, C. Leite D. A Study on the Behavior of Smart Starch-co-poly(N-isopropylacrylamide) Hybrid Microgels for Encapsulation of Methylene Blue

Hybrid microgels made from starch nanoparticles (SNPs) and poly(N-isopropylacrylamide) p(NIPAM) were used as promising hosts for the methylene blue (MB) dye. In this paper, these thermoresponsive microgels were characterized by dynamic light scattering (DLS), zeta potential measurements (ZP), and scanning electron microscopy (SEM) and evaluated as carriers for skin-targeted drug delivery. The hybrid microgel-MB systems in PBS solution were also studied by UV-vis spectroscopy and DLS, revealing discernible differences in spectral intensity and absorption shifts compared to microgels devoid of MB. This underscores the successful integration of methylene blue within the SNPs-co-p(NIPAM) microgels, signifying their potential as efficacious drug delivery vehicles.

Determination of Aminophylline in Human Serum Using Hydrogel Microspheres for Coupled Surface-Enhanced Raman Spectroscopy (SERS) and Solid-Phase Extraction

Aminophylline (AMP) is a bronchodilator. The therapeutic and toxic doses are very close. Therefore, therapeutic drug monitoring (TDM) of AMP is essential in clinical practice. Microgels were synthesized by free radical precipitation polymerization. Silver@poly(N-isopropyl acrylamide) (Ag@PNIPAM) hybrid microgels were obtained by loading silver (Ag) nanoparticles into the three-dimensional network of the microgels by in situ reduction. The microgel is a three-dimensional reticular structure with tunable pore size, large specific surface area, and good biocompatibility, which can be used as a sorbent for solid-phase extraction (SPE) of target molecules in complex matrices and as a surface-enhanced Raman spectroscopy (SERS) substrate. We optimized the conditions affecting SERS enhancement, such as silver nitrate (AgNO3) concentration and SPE time, according to the SERS strategy of Ag@PNIPAM hybrid microgels to achieve label-free TDM for trace AMP in human serum. The results showed good linearity between the logarithmic concentration of AMP and its SERS intensity in the range of 1-1.1 × 102 µg/mL, with a correlation coefficient (R2) of 0.9947 and a low detection limit of 0.61 µg/mL. The assay accuracy was demonstrated by spiking experiments, with recoveries ranging from 93.0 to 101.8%. The method is rapid, sensitive, reproducible, requires simple sample pretreatment, and has good potential for use in clinical treatment drug monitoring.

Chitosan-based sponges containing clotrimazole for the topical management of vulvovaginal candidiasis

Vulvovaginal candidiasis (VVC) persists as a worrying women's healthcare issue, often relying on suboptimal therapeutics. Novel intravaginal dosage forms focusing on improving patient acceptability and featuring improved biopharmaceutical properties could be interesting alternatives to available antifungal products. Different formulations of sponges based on chitosan (Ch), with or without crosslinking and co-formulated with poly(N-vinylcaprolactam) (PNVCL), were produced for the topical administration of clotrimazole (CTZ) and further tested for physicochemical properties, drug release, cytotoxicity and antifungal activity. Results showed that high amounts of CTZ (roughly 30-50 %) could be incorporated into sponges obtained by using a simple freeze-drying methodology. Cross-linking of Ch with ammonia affected the morphology and mechanical features of sponges and shifted the release profile from sustained (around 20 % and 60 % drug released after 4 h and 24 h, respectively) to fast-releasing (over 90 % at 4 h). The combination of PNVCL with non-crosslinked Ch also allowed tuning drug release, namely by increasing the initial amount of CTZ released in simulated vaginal fluid (roughly 40 % after 4 h), as compared to sponges featuring only non-crosslinked Ch. All formulations displayed low toxicity to cell lines derived from the female genital tract, with viability values kept above 70 % after 24 h incubation with sponge extracts. These also allowed maintaining the rapid onset of the antifungal effects of CTZ at minimum inhibitory concentrations ranging from 0.5 to 16 μg/mL for a panel of six different Candida spp. strains. Overall, proposed sponge formulations appear to be promising alternatives for the safe and effective management of VVC.

Nanomedical research and development in Spain: improving the treatment of diseases from the nanoscale

The new and unique possibilities that nanomaterials offer have greatly impacted biomedicine, from the treatment and diagnosis of diseases, to the specific and optimized delivery of therapeutic agents. Technological advances in the synthesis, characterization, standardization, and therapeutic performance of nanoparticles have enabled the approval of several nanomedicines and novel applications. Discoveries continue to rise exponentially in all disease areas, from cancer to neurodegenerative diseases. In Spain, there is a substantial net of researchers involved in the development of nanodiagnostics and nanomedicines. In this review, we summarize the state of the art of nanotechnology, focusing on nanoparticles, for the treatment of diseases in Spain (2017-2022), and give a perspective on the future trends and direction that nanomedicine research is taking.

Pre- and post-functionalization of thermoresponsive cationic microgels with ionic liquid moieties carrying different counterions

We investigate the effect of different anions on the temperature-dependent solution properties of poly(N-vinylcaprolactam) microgels carrying alkylated ionic liquid vinylimidazolium moieties synthesized by a pre- and post-functionalization approach.

Rheology Applied to Microgels: Brief (Revision of the) State of the Art

The ability of polymer microgels to rapidly respond to external stimuli is of great interest in sensors, lubricants, and biomedical applications, among others. In most of their uses, microgels are subjected to shear, deformation, and compression forces or a combination of them, leading to variations in their rheological properties. This review article mainly refers to the rheology of microgels, from the hard sphere versus soft particles' model. It clearly describes the scaling theories and fractal structure formation, in particular, the Shih et al. and Wu and Morbidelli models as a tool to determine the interactions among microgel particles and, thus, the viscoelastic properties. Additionally, the most recent advances on the characterization of microgels' single-particle interactions are also described. The review starts with the definition of microgels, and a brief introduction addresses the preparation and applications of microgels and hybrid microgels.

Temperature Controlled Loading and Release of the Anti-Inflammatory Drug Cannabidiol by Smart Microgels

CBD is a promising candidate for treatment of many diseases and plays a major role in the growing trend to produce high-end drugs from natural, renewable resources. In the present work, we demonstrate a way to incorporate the anti-inflammatory drug CBD into smart microgel particles. The copolymer microgels that we chose as carrier systems exhibit a volume phase transition temperature of 39 ∘C, which is just above normal body temperature and makes them ideal candidates for hyperthermia treatment. While a simple loading route of CBD was not successful due to the enormous hydrophobicity of CBD, an alternative route was developed by immersing the microgels in ethanol. Despite the expected loss of thermoresponsive behaviour of the microgel matrix due to the solvent exchange, a temperature-dependent release of CBD was detected by the material, creating an interesting question of interactions between CBD and the microgel particles in ethanol. Furthermore, the method developed for loading of the microgel particles with CBD in ethanol was further improved by a subsequent transfer of the loaded particles into water, which proves to be an even more promising approach due to the successful temperature-dependent release of the drug above the collapse temperature of the microgels.

Metal cation responsive anionic microgels: behaviour towards biologically relevant divalent and trivalent ions

Anionic poly(vinylcaprolactam-co-itaconicacid-co-dimethylitaconate) microgels were synthesized via dispersion polymerization and their responsiveness towards cations, namely Mg²⁺, Sr²⁺, Cu²⁺ and Fe³⁺, was investigated. The itaconic moieties chelate the metal ions which act as a crosslinker and decrease the electrostatic repulsion within the network, leading to a decrease in the gel size. The responsiveness towards the metal ion concentration has been studied via dynamic light scattering (DLS) and the number of ions bonded within the network has been quantified with ion chromatography. Through the protonation of the carboxylate groups in the gel network, their interaction with the cations is significantly lowered, and the metals are consequently released back in solution. The number of ions released was assessed also via ion chromatography for all four ions, whilst Mg²⁺ was also used as a model ion to display the reversibility of the system. The microgels can bond and release divalent cations over multiple cycles without undergoing any loss of functionality. Moreover, these gels also selectively entrap Fe³⁺ with respect to the remaining divalent cations, opening the possibility of using the proposed gels in the digestive tract as biocompatible chelating agents to fight iron overaccumulation.

Dual-Degradable Biohybrid Microgels by Direct Cross-Linking of Chitosan and Dextran Using Azide-Alkyne Cycloaddition

In this work, biocompatible and degradable biohybrid microgels based on chitosan and dextran were synthesized for drug delivery applications. Two kinds of bio-based building blocks, alkyne-modified chitosan and azide-modified dextran, were used to fabricate microgels via single-step cross-linking in water-in-oil emulsions. The cross-linking was initiated in the presence of copper(II) without the use of any extra cross-linkers. A series of pH-responsive and degradable microgels were successfully synthesized by varying the degree of cross-links. The microgels were characterized using ¹H NMR and FTIR spectroscopy which proved the successful cross-linking of alkyne-modified chitosan and azide-modified dextran by copper(II)-mediated click reaction. The obtained microgels exhibit polyampholyte character and can carry positive or negative charges in aqueous solutions at different pH values. Biodegradability of microgels was shown at pH 9 or in the presence of Dextranase due to the hydrolysis of carbonate esters in the microgels or 1,6-α-glucosidic linkages in dextran structure, respectively. Furthermore, the microgels could encapsulate vancomycin hydrochloride (VM), an antibiotic, with a high loading of approximately 93.67% via electrostatic interactions. The payload could be released in the presence of Dextranase or under an alkaline environment, making the microgels potential candidates for drug delivery, such as colon-specific drug release.

Visual Detection of Thiocyanate Based on Fabry-Perot Etalons with a Responsive Polymer Brush as the Transducer

The detection of thiocyanate (SCN^-) is particularly important in industrial effluents and biological fluids because of the toxic nature of SCN^-. Herein, a metal-insulator-metal (MIM) resonator for visual detection of SCN^- is presented based on a poly[(2-(methacryloyloxy)ethyl) trimethylammonium chloride] (PMETAC) brush. The MIM resonator exhibits obvious color change as the concentration of SCN^- changes, which can be easily distinguished by the naked eyes. In addition, the as-prepared MIM resonator also shows the advantages of good anti-interference, excellent reusability, and fast response rate. Combining the above advantages, the proposed MIM resonator may provide a broad perspective for a wide variety of visible-light applications.

Resolving the internal morphology of core-shell microgels with super-resolution fluorescence microscopy

We investigate the internal morphology of smart core-shell microgels by super-resolution fluorescence microscopy exploiting a combination of 3D single molecule localization and structured illumination microscopy utilizing freely diffusing fluorescent dyes. This approach does not require any direct chemical labeling and does not perturb the network structure of these colloidal gels. Hence, it allows us to study the morphology of the particles with very high precision. We found that the structure of the core-forming seed particles is drastically changed by the second synthesis step necessary for making the shell, resulting in a core region with highly increased dye localization density. The present work shows that super-resolution microscopy has great potential with respect to the study of soft colloidal systems.

A pH-sensitive carrier based-on modified hollow mesoporous carbon nanospheres with calcium-latched gate for drug delivery

A novel nanocarrier based-on hollow mesoporous carbon nanospheres (HMCNs) with primary amines on its surface, a large cavity, and good hydrophilicity was synthesized by a hydrothermal reaction. The primary amine functionalities on the mesoporous carbon were used as the initiation sites for growing poly (epichlorohydrin) (PCH) chains. The chlorine groups in the side chain of PCH were replaced with imidazole as the pendant groups. Calcium chloride (CaCl₂) was applied as a capping agent. The coordination bonding was formed between pendant imidazole groups and calcium ions. Doxorubicin (DOX) was selected as a model of hydrophilic anticancer drug and was loaded onto the nanocarrier and released through the cleavage of the pH-sensitive coordination bonding. The gating mechanism enables the nanocarrier to store and release the calcium ions and the DOX molecules trapped in the pores. MTT assay toward HeLa cells indicated that the nanocarrier had low toxicity because of the surface modification with the oxygen-rich polymer. The cellular uptake of the pH-sensitive nanocarrier for HeLa cancer cell lines was confirmed by CLSM images and flow cytometry. So, the novel pH-sensitive nanocarrier can be applicable to carry and release both DOX drug and calcium ions for cancer treatment.