Nanosuspension: a new vehicle for the improvement of the delivery of drugs to the ocular surface. Application to amphotericin B

Dendritic hybrid materials comprising polyhedral oligomeric silsesquioxane (POSS) and hyperbranched polyglycerol for effective antifungal drug delivery and therapy in systemic candidiasis

Systemic Candida infections are routinely treated with amphotericin B (AMB), a highly effective antimycotic drug. However, due to severe toxicities linked to the parenteral administration of conventional micellar formulations (Fungizone®), its clinical utility is limited. Hyperbranched polyglycerols (HPGs) are multi-branched three-dimensional hydrophilic macromolecules that can be used to lessen the toxicity of AMB while also increasing its aqueous solubility. In the current research, to improve the safety and therapeutic efficacy of AMB, we developed new polyhedral oligomeric silsesquioxane - hyperbranched polyglycerol dendrimers with cholesterol termini (POSS-HPG@Chol) using azide-alkyne click reaction. Compared with Fungizone®, the as-synthesized POSS-HPG@Chol/AMB had lower minimum inhibitory and fungicidal concentrations against almost all studied Candida spp., as well as much less hemolysis and cytotoxicity. POSS-HPG@Chol/AMB revealed total protection of Balb/C mice from severe Candida infections in an experimental model of systemic candidiasis and can effectively reduce or eliminate AMB liver and kidney tissue injuries. Thanks to their safety, biocompatibility, and unique therapeutic properties, the developed POSS-polyglycerol dendrimers could be viable nanostructures for the delivery of poorly soluble drugs like AMB.

Amphiphilic hyperbranched polyglycerol nanoarchitectures for Amphotericin B delivery in Candida infections

Although Amphotericin B (AMB) is considered the most effective anti-mycotic agent for treating Candida infections, its clinical use is limited due to its high toxicity. To address this issue, we developed cholesterol-based dendritic micelles of hyperbranched polyglycerol (HPG), including cholesterol-cored HPG (Chol-HPG) and cholesterol end-capped HPG (HPG@Chol), for AMB delivery. The findings suggested that the presence of cholesterol moieties could control AMB loading and release properties. Dendritic micelles inhibited AMB hemolysis and cytotoxicity in HEK 293 and RAW 264.7 cell lines while increasing antifungal activity against C. albicans biofilm formation. Furthermore, significantly lower levels of renal and liver toxicity biomarkers compared to Fungizone® ensured AMB-incorporated dendritic micelle biosafety, which was confirmed by histopathological evaluations. Overall, the Chol-HPG and HPG@Chol dendritic micelles may be a viable alternative to commercially available AMB formulations as well as an effective delivery system for other poorly soluble antifungal agents.

Development and Optimization of Ciprofloxacin HCl-Loaded Chitosan Nanoparticles Using Box–Behnken Experimental Design

Various chitosan (CS)-based nanoparticles (CS-NPs) of ciprofloxacin hydrochloride (CHCl) have been investigated for therapeutic delivery and to enhance antimicrobial efficacy. However, the Box–Behnken design (BBD)-supported statistical optimization of NPs of CHCl has not been performed in the literature. As a result, the goal of this study was to look into the key interactions and quadratic impacts of formulation variables on the performance of CHCl-CS-NPs in a systematic way. To optimize CHCl-loaded CS-NPs generated by the ionic gelation process, the response surface methodology (RSM) was used. The BBD was used with three factors on three levels and three replicas at the central point. Tripolyphosphate, CS concentrations, and ultrasonication energy were chosen as independent variables after preliminary screening. Particle size (PS), polydispersity index (PDI), zeta potential (ZP), encapsulation efficiency (EE), and in vitro release were the dependent factors (responses). Prepared NPs were found in the PS range of 198–304 nm with a ZP of 27–42 mV. EE and drug release were in the range of 23–45% and 36–61%, respectively. All of the responses were optimized at the same time using a desirability function based on Design Expert® modeling and a desirability factor of 95%. The minimum inhibitory concentration (MIC) of the improved formula against two bacterial strains, Pseudomonas aeruginosa and Staphylococcus aureus, was determined. The MIC of the optimized NPs was found to be decreased 4-fold compared with pure CHCl. The predicted and observed values for the optimized formulation were nearly identical. The BBD aided in a better understanding of the intrinsic relationship between formulation variables and responses, as well as the optimization of CHCl-loaded CS-NPs in a time- and labor-efficient manner.

Plant-Derived Nanoscale-Encapsulated Antioxidants for Oral and Topical Uses: A Brief Review

Several plant-based nanoscale-encapsulated antioxidant compounds (rutin, myricetin, β-carotene, fisetin, lycopene, quercetin, genkwanin, lutein, resveratrol, eucalyptol, kaempferol, glabridin, pinene, and whole-plant bio-active compounds) are briefly introduced in this paper, along with their characteristics. Antioxidants’ bioavailability has become one of the main research topics in bio-nanomedicine. Two low patient compliance drug delivery pathways (namely, the oral and topical delivery routes), are described in detail in this paper, for nanoscale colloidal systems and gel formulations. Both routes and/or formulations seek to improve bioavailability and maximize the drug agents’ efficiency. Some well-known compounds have been robustly studied, but many remain elusive. The objective of this review is to discuss recent studies and advantages of nanoscale formulations of plant-derived antioxidant compounds.

Preparation of chelidonine highly loaded poly(lactide-co-glycolide)-based nanoparticles using a single emulsion method: Cytotoxic effect on MDA-MB-231 cell line

Introduction: Chelidonine, a bio-active component of Chelidonium majus, has been investigated for its anti-proliferative effects on various cancer cell lines with multidrug resistance (MDR). Although the results are auspicious, its poor water solubility and low bioavailability are the main limitations for clinical applications. This study aimed to develop poly(lactic-co-glycolic acid) (PLGA) nanoparticles loaded with chelidonine, in order to enhance its bioavailability for oral administration and improve the therapeutic index. Methods: Herein, we encapsulated chelidonine in PLGA nanoparticles using a single emulsion solvent evaporation method. Nanoparticles were characterized in terms of size, surface charge and morphology, encapsulation efficiency, drug loading, and in vitro drug release profile. The anti-cancer efficacy of chelidonine-loaded nanoparticles and free chelidonine was evaluated in MDA-MB-231 breast cancer cells. Results: The physicochemical characteristics showed spherical particles in nanometer size range (263 ± 19.6 nm), with negative surface charge (−20.67 ± 2.48 mv), high encapsulation efficiency (76.53 ± 3.61%), and drug loading (22.47 ± 0.09%), as well as drug release amount of 60.27±5.68% up to 10 days. Furthermore, chelidonine-loaded nanoformulations were found to improve anti-cancer potential, compared with unentrapped chelidonine. Conclusion: This in vitro study showed that the encapsulation of chelidonine, as a potent herbal drug, in a polymeric matrix enhances its bioavailability. This offers an efficient vehicle for targeted drug delivery in cancer treatment.

Delivery strategies of amphotericin B for invasive fungal infections

Invasive fungal infections (IFIs) represent a growing public concern for clinicians to manage in many medical settings, with substantial associated morbidities and mortalities. Among many current therapeutic options for the treatment of IFIs, amphotericin B (AmB) is the most frequently used drug. AmB is considered as a first-line drug in the clinic that has strong antifungal activity and less resistance. In this review, we summarized the most promising research efforts on nanocarriers for AmB delivery and highlighted their efficacy and safety for treating IFIs. We have also discussed the mechanism of actions of AmB, rationale for treating IFIs, and recent advances in formulating AmB for clinical use. Finally, this review discusses some practical considerations and provides recommendations for future studies in applying AmB for combating IFIs.

Colloidal nanosystems with mucoadhesive properties designed for ocular topical delivery

Over the last years, the scientific interest about topical ocular delivery targeting the posterior segment of the eye has been increasing. This is probably due to the fact that this is a non-invasive administration route, well tolerated by patients and with fewer local and systemic side effects. However, it is a challenging task due to the external ocular barriers, tear film clearance, blood flow in the conjunctiva and choriocapillaris and due to the blood-retinal barriers, amongst other features. An enhanced intraocular bioavailability of drugs can be achieved by either improving corneal permeability or by improving precorneal retention time. Regarding this last option, increasing residence time in the precorneal area can be achieved using mucoadhesive polymers such as xyloglucan, poly(acrylate), hyaluronic acid, chitosan, and carbomers. On the other hand, colloidal particles can interact with the ocular mucosa and enhance corneal and conjunctival permeability. These nanosystems are able to deliver a wide range of drugs, including macromolecules, providing stability and improving ocular bioavailability. New pharmaceutical approaches based on nanotechnology associated to bioadhesive compounds have emerged as strategies for a more efficient treatment of ocular diseases. Bearing this in mind, this review provides an overview of the current mucoadhesive colloidal nanosystems developed for ocular topical administration, focusing on their advantages and limitations.

Nanosuspension as an Efficient Carrier for Improved Ocular Permeation of Voriconazole

BACKGROUND

The present limitations related to the ocular administration of antifungal drugs for the treatment of fungal keratitis include poor ocular bioavailability, limited retention time, and low ocular tissue penetration.

METHODS

This study aimed to prepare a novel ophthalmic voriconazole-loaded nanosuspension based on Eudragit RS 100. Pharmasolve® was explored as a corneal permeation enhancer in voriconazole ophthalmic formulation using in vitro and in vivo experiments. Briefly, 1% voriconazole-loaded nanosuspension was prepared using the quasi-emulsion solvent evaporation process.

RESULTS

Characterizations of the voriconazole-loaded nanosuspension by Zetasizer Nano ZS and Transmission Electron Microscope (TEM) showed a uniform spherical shape without any agglomeration. The well-discreted nanoparticle with a size of 138 ± 1.3 nm was achieved with high entrapment efficiency (98.6 ± 2.5%) and positive zeta potential in the range of 22.5-31.2mV, indicating excellent physical stability.

DISCUSSION

Voriconazole-loaded nanosuspension containing the penetration enhancer displayed good permeability both in vitro and in vivo compared with the commercial voriconazole injection. The voriconazole-loaded nanosuspension exhibited good antifungal activity, significantly inhibiting the growth of Candida albicans at a lower concentration of voriconazole (2.5μg/mL, p < 0.05).

CONCLUSION

In conclusion, the voriconazole-loaded nanosuspension containing Pharmasolve® can be used as an effective ophthalmic formulation for the topical ocular delivery of voriconazole.

Design and Evaluation of Eudragit RS-100 Based Itraconazole Nanosuspension for Ophthalmic Application

BACKGROUND

Poor water soluble compounds are difficult to develop as drug products using conventional formulation techniques.

OBJECTIVE

In the present study, the potential of Eudragit RS-100 nanosuspension as a new vehicle for the improvement of the delivery of drugs to the intraocular level was investigated.

METHODS

Solvent evaporation technique has been employed for nanosuspension preparation. Surfactant concentration and drug to polymer ratio has been optimized using 3<SUP>2</SUP> factorial design to achieve desired particle size, entrapment efficiency and percent permeation responses as dependent variables. All the formulations were characterized for particle size, zeta potential, polydispersity index (PDI), Fourier Transform Infrared Spectroscopy (FTIR), Differential scanning calorimetery (DSC), X-ray Diffraction (XRD) analysis, viscosity, antifungal study and Transmission Electron Microscopy (TEM). Secondly, itraconazole eye drop was prepared by using sulfobuty ether-β-cyclodextrin and comparatively studying its antifungal efficacy.

RESULTS

The nanosuspension had a particle size range of 332.7-779.2nm, zeta potential +0.609-16.3, entrapment efficiency 61.32 ± 1.36%-76.34 ± 2.04%. Ex vitro corneal permeability study showed that optimized itraconazole nanosuspension produced higher permeation as compared to the market formulation and Itraconazole eye drop. Moreover, optimized nanosuspension was found as more active against Candida albicans & Aspergillus flavus compared to the market formulation and Itraconazole eye drop.

CONCLUSION

The nanosuspension approach could be an ideal, promising approach to increase the solubility and dissolution of Itraconazole.

Advances and limitations of drug delivery systems formulated as eye drops

Topical instillation of eye drops remains the most common and easiest route of ocular drug administration, representing the treatment of choice for many ocular diseases. Nevertheless, low ocular bioavailability of topically applied drug molecules can considerably limit their efficacy. Over the last several decades, numerous drug delivery systems (DDS) have been developed in order to improve drug bioavailability on the ocular surfaces. This review systematically covers the most recent advances of DDS applicable by topical instillation, that have shown better performance in in vivo models compared to standard eye drop formulations. These delivery systems are based on in situ forming gels, nanoparticles and combinations of both. Most of the DDS have been developed using natural or synthetic polymers. Polymers offer many advantageous properties for designing advanced DDS including biocompatibility, gelation properties and/or mucoadhesiveness. However, despite the high number of studies published over the last decade, there are several limitations for clinical translation of DDS. This review article focuses on the recent advances for the development of ocular drug delivery systems. In addtion, the potential challenges for commercialization of new DDS are presented.

Emerging role of nanosuspensions in drug delivery systems

Rapid advancement in drug discovery process is leading to a number of potential new drug candidates having excellent drug efficacy but limited aqueous solubility. By virtue of the submicron particle size and distinct physicochemical properties, nanosuspension has the potential ability to tackle many formulation and drug delivery issues typically associated with poorly water and lipid soluble drugs. Conventional size reduction equipment such as media mill and high-pressure homogenizers and formulation approaches such as precipitation, emulsion-solvent evaporation, solvent diffusion and microemulsion techniques can be successfully implemented to prepare and scale-up nanosuspensions. Maintaining the stability in solution as well as in solid state, resuspendability without aggregation are the key factors to be considered for the successful production and scale-up of nanosuspensions. Due to the considerable enhancement of bioavailability, adaptability for surface modification and mucoadhesion for drug targeting have significantly expanded the scope of this novel formulation strategy. The application of nanosuspensions in different drug delivery systems such as oral, ocular, brain, topical, buccal, nasal and transdermal routes are currently undergoing extensive research. Oral drug delivery of nanosuspension with receptor mediated endocytosis has the promising ability to resolve most permeability limited absorption and hepatic first-pass metabolism related issues adversely affecting bioavailability. Advancement of enabling technologies such as nanosuspension can solve many formulation challenges currently faced among protein and peptide-based pharmaceuticals.

Globular protein stabilized nanoparticles for delivery of disulfiram: fabrication, characterization, in vitro toxicity, and cellular uptake

Disulfiram (DSF), an FDA-approved anti-alcoholic drug, has recently shown that it possesses anti-cancer effects. However, DSF is hydrophobic in nature with less stability. Therefore, new approaches are required for the effective delivery of DSF to treat cancers. Herein, we prepared DSF loaded soy protein isolate (SPI) nanosuspension (Ns) for enhancing the anti-cancer delivery of DSF. The optimized DSF-SPI-Ns had an average particle size of 164.28 ± 2.07 nm with a narrow size distribution of 0.217 ± 0.035 and zeta potential around −22.30 ± 2.11 mV, respectively. The highest drug loading and entrapment efficiency achieved was 5.516 ± 1.98%, and 91.61 ± 1.15%, respectively. The surface morphology of Ns was revealed by TEM, and the FTIR DSC, PXRD, and TGA were used for physicochemical characterization. Further, fluorescence spectroscopy and molecular docking studies were carried out to understand the interactions between (SPI and DSF) and binding sites of DSF on the surface of SPI, respectively. In vitro release studies showed a sustained release pattern and followed a Fickian diffusion release from the Ns. The in vitro cytotoxicity of SPI indicated the excellent biocompatibility, and DSF-SPI-Ns were found to be more cytotoxic compared to the free DSF solution. Moreover, the cellular uptake studies also indicated the effective delivery of the formulation to the cancer cells. Results of the current study suggested that the SPI coated Ns might be a promising drug delivery system for hydrophobic DSF, and the potential application of SPI as a coating/stabilizing agent for the delivery of hydrophobic/hydrophilic cancer therapeutics.

Disulfiram (DSF), an FDA-approved anti-alcoholic drug, has recently shown that it possesses anti-cancer effects.

Design, development and characterization of ketorolac tromethamine polymeric nanosuspension

Aim: At present, various ophthalmic formulations show low bioavailability. The rationale of present work was to design and develop stable ketorolac tromethamine nanosuspension with sustained effect and greater permeability for ocular drug delivery and increased ocular residence. Materials & methods: Formulations were designed by using central composite design, developed by combined nanoprecipitation and probe sonication method. Results & discussion: Nanosuspensions depicted the size range of the particles in between 199 and 441 nm with slight reduction in crystallinity of drug. In vitro drug release revealed that higher % entrapment efficiency of drug in nanosuspension delays the drug release. Conclusion: Eudragit RL-100-based nanosuspension increases viscosity and avoids problems like drug loss from precorneal surface and rapid drainage through nasolacrimal areas.

Advanced Formulation Approaches for Ocular Drug Delivery: State-Of-The-Art and Recent Patents

The eye presents extensive perspectives and challenges for drug delivery, mainly because of the extraordinary capacity, intrinsic to this path, for drugs to permeate into the main circulatory system and also for the restrictions of the ocular barriers. Depending on the target segment of the eye, anterior or posterior, the specifications are different. The ocular route experienced in the last decades a lot of progresses related with the development of new drugs, improved formulations, specific-designed delivery and even new routes to administer a drug. Concomitantly, new categories of materials were developed and adapted to encapsulate drugs. With such advances, a multiplicity of parameters became possible to be optimized as the increase in bioavailability and decreased toxic effects of medicines. Also, the formulations were capable to easily adhere to specific tissues, increase the duration of the therapeutic effect and even target the delivery of the treatment. The ascending of new delivery systems for ocular targeting is a current focus, mainly because of the capacity to extend the normal time during which the drug exerts its therapeutic effect and, so, supplying the patients with a product which gives them fewer side effects, fewer number of applications and even more effective outcomes to their pathologies, surpassing the traditionally-used eye drops. Depending on the systems, some are capable of increasing the duration of the drug action as gels, emulsions, prodrugs, liposomes, and ocular inserts with hydrophilic properties, improving the absorption by the cornea. In parallel, other devices use as a strategy the capacity to sustain the release of the carried drugs by means of erodible and non-erodible matrices. This review discusses the different types of advanced formulations used for ocular delivery of therapeutics presenting the most recent patents according to the clinical applications.

Advances in Biodegradable Nano-Sized Polymer-Based Ocular Drug Delivery

The effective delivery of drugs to the eye remains a challenge. The eye has a myriad of defense systems and physiological barriers that leaves ocular drug delivery systems with low bioavailability profiles. This is mainly due to poor permeability through the epithelia and rapid clearance from the eye following administration. However, recent advances in both polymeric drug delivery and biomedical nanotechnology have allowed for improvements to be made in the treatment of ocular conditions. The employment of biodegradable polymers in ocular formulations has led to improved retention time, greater bioavailability and controlled release through mucoadhesion to the epithelia in the eye, amongst other beneficial properties. Nanotechnology has been largely investigated for uses in the medical field, ranging from diagnosis of disease to treatment. The nanoscale of these developing drug delivery systems has helped to improve the penetration of drugs through the various ocular barriers, thus improving bioavailability. This review will highlight the physiological barriers encountered in the eye, current conventional treatment methods as well as how polymeric drug delivery and nanotechnology can be employed to optimize drug penetration to both the anterior and posterior segment of the eye.

Recent insights on nanomedicine for augmented infection control

Antimicrobial agents have been widely investigated for protecting against microbial infections in modern health. Drug-related limitations, poor bioavailability, toxicity to mammalian cells, and frequent bacteria drug resistance are major challenges faced when exploited in nanomedicine forms. Specific attention has been paid to control nanomaterial-based infection against numerous challenging pathogens in addition to improved drug delivery, targeting, and pharmacokinetic (PK) profiles, and thus, efficient antimicrobials have been fabricated using diverse components (metals, metal oxides, synthetic and semisynthetic polymers, natural or biodegradable polymers, etc). The present review covers several nanocarriers delivered through various routes of administration, highlighting major findings to control microbial infection as compared to using the free drug. Results over the past decade support the consistent development of various nanomedicines capable of improving biological significance and therapeutic benefits against an array of microbial strains. Depending on the intended application of nanomedicine, infection control will be challenged by various factors such as weighing the risk-benefits in healthcare settings, nanomaterial-induced (eco)toxicological hazards, frequent development of antibiotic resistance, scarcity of in vivo toxicity data, and a poor understanding of microbial interactions with nanomedicine at the molecular level. This review summarizes well-established informative data for nanomaterials used for infection control and safety concerns of nanomedicines to healthcare sectors followed by the significance of a unique "safe-by-design" approach.

Recent advances in topical nano drug-delivery systems for the anterior ocular segment

Over the past decade, there has been a rise in the number of clinical cases of moderate to severe anterior segment ocular diseases. Conventional topical ophthalmic formulations have several limitations - to address which, novel drug-delivery systems are needed. Additionally, formidable physiological barriers limit ocular bioavailability through the topical route of application. During the last decade, various nano-scaled ocular drug-delivery strategies have been reported. Some of these exploratory, topical, noninvasive approaches have shown promise in improving penetration into the anterior segment tissues of the eye. In this article, we review the available literature with respect to the safety, efficiency and effectiveness of these nano systems.

Challenges in the Polyene- and Azole-Based Pharmacotherapy of Ocular Fungal Infections

Polyenes and azoles constitute 2 major drug classes in the antifungal armamentarium used to treat fungal infections of the eye such as fungal keratitis, endophthalmitis, conjunctivitis, and blepharitis. These classes of drugs have come to occupy an important niche in ophthalmic antifungal therapy due to their broad spectrum of activity against a variety of filamentous and yeast-like fungi. Natamycin suspension (Natacyn^®), a polyene antifungal drug, is currently the only US FDA-approved formulation for treating ophthalmic fungal infections, whereas the other polyene and azole antifungals such as amphotericin B, fluconazole, itraconazole, ketoconazole, miconazole, voriconazole, and posaconazole are routinely used off-label in the clinical setting. Despite potent antifungal activity, the clinical utility of these agents in ophthalmic infections has been challenged by their physicochemical properties, the unique ocular anatomy and physiology, selective antifungal activity, ocular and systemic toxicity, emergence of resistance and cross-resistance, and absence of reliable techniques for developing a robust in vitro-in vivo correlation. This review discusses the aforementioned challenges and the common approaches undertaken to circumnavigate the difficulties associated with the polyene- and azole-based pharmacotherapy of ophthalmic fungal infections.

Thermo-sensitive gel in glaucoma therapy for enhanced bioavailability: In vitro characterization, in vivo pharmacokinetics and pharmacodynamics study

AIMS

Glaucoma is a chronic ophthalmic disease, which has become one of the leading causes to progressive and irreversible blindness. Current ophthalmic drug delivery to treat glaucoma is mostly eyedrop, whose rapid elimination on corneal surface can lead to poor bioavailability. The present study was aimed to develop a timolol maleate loaded thermo-sensitive gel (TM-TSG) with improved bioavailability to treat glaucoma.

MAIN METHODS

TM-TSG was prepared by homogeneously dispersing 0.3% (w/v) timolol maleate, 24.25% (w/v) poloxamer 407 (P407) and 1.56% (w/v) poloxamer 188 (P188) into phosphate buffer solution (pH = 7.4) and the formulated TM-TSG was characterized.

KEY FINDINGS

TM-TSG was stored in liquid form at room temperature (25 °C) and transited to semisolid gel at physiological temperature (32 °C). The rheological property of TM-TSG was in favor of uniform distribution of drug. TM-TSG showed good stability at different conditions including centrifugation, autoclaving and different temperature. In vivo pharmacokinetic studies indicated that TM-TSG could enhance absorption of TM in aqueous humor and improve the ocular bioavailability in comparison of commercial TM eyedrops. In vivo experiment result showed that TM-TSG had greater effect in treating glaucoma than TM eyedrops by sustainably lowering intraocular pressure (IOP) for a week. Moreover, slit lamp test and histopathological analysis demonstrated that TM-TSG had excellent biocompatibility.

SIGNIFICANCE

TM-TSG could be a promising ophthalmic delivery system for glaucoma therapy.

Parenteral nanosuspensions: a brief review from solubility enhancement to more novel and specific applications

Advancements in in silico techniques of lead molecule selection have resulted in the failure of around 70% of new chemical entities (NCEs). Some of these molecules are getting rejected at final developmental stage resulting in wastage of money and resources. Unfavourable physicochemical properties affect ADME profile of any efficacious and potent molecule, which may ultimately lead to killing of NCE at final stage. Numerous techniques are being explored including nanocrystals for solubility enhancement purposes. Nanocrystals are the most successful and the ones which had a shorter gap between invention and subsequent commercialization of the first marketed product. Several nanocrystal-based products are commercially available and there is a paradigm shift in using approach from simply being solubility enhancement technique to more novel and specific applications. Some other aspects in relation to parenteral nanosuspensions are concentrations of surfactant to be used, scalability and in vivo fate. At present, there exists a wide gap due to poor understanding of these critical factors, which we have tried to address in this review. This review will focus on parenteral nanosuspensions, covering varied aspects especially stabilizers used, GRAS (Generally Recognized as Safe) status of stabilizers, scalability challenges, issues of physical and chemical stability, solidification techniques to combat stability problems and in vivo fate.

Development of copolymeric nanoparticles of hypocrellin B: Enhanced phototoxic effect and ocular distribution

In the present work, we have developed a photosensitizer hypocrellin B (HB) and nano silver loaded PLGA-TPGS nanoparticles with improved singlet oxygen production for enhanced photodynamic effect for the efficient treatment of age related macular degeneration. Random copolymer (PLGA-TPGS) synthesized by ring opening and bulk polymerization was characterized by IR, ¹H NMR and TGA analysis. HBS-CP-NPs prepared by nanoprecipitation techniques were spherical shaped 89.6-753.6nm size particles with negative zeta potential. The average encapsulation efficiency was 84.06±11.43% and HB release from the HBS-CP-NPs was found to be biphasic with a slow release of 1.41% in the first 8h and 48.91% during 3days as measured by RP-HPLC. DSC thermograms indicate that HB was dispersed as amorphous form in HBS-CP-NPs. The ROS generation level of HBS-CP-NPs was significantly higher than that of HB/HB-CP-NPs. The production of ¹O₂ of HBS-CP-NPs has been assessed using EPR spectrometer. The ¹O₂ generating efficiency follows the order of nano silver>HB-CP-NPs>HBS-CP-NPs>pure HB drug solution. The superior phototoxic effect of HBS-CP-NPs (85.5% at 50μM) was attained at 2h irradiation in A549 cells. Significant anti angiogenic effect of HBS-CP-NPs was observed in treated CAM embryos. Following intravenous injection of HBS-CP-NPs to rabbits, the maximum amount of HB was found in retina (3h), iris (9h), aqueous humour (9h) and vitreous humour (9h).

Genkwanin nanosuspensions: a novel and potential antitumor drug in breast carcinoma therapy

Recently, genkwanin (GKA) has been shown to display in vitro antitumor activity against some cancer cells, but its poor solubility restricted the in vivo study and further investigation of its antitumor therapeutic efficacy. In this paper, genkwanin nanosuspensions (GKA-NSps) were successfully prepared using D-alpha tocopherol acid polyethylene glycol succinate (TPGS) as a stabilizer using the precipitation-homogenization method. The obtained GKA-NSps had an average particle size of 183.1 ± 4.4 nm, a PDI value of 0.16 ± 0.07, a zeta potential of −16.2 ± 0.1 mV, and a drug loading content of 49.36 ± 0.14%. GKA-NSps showed spherical morphology and very good stability in normal saline, phosphate buffer saline (PBS, pH 7.4), 5% glucose, artificial gastric juice, artificial intestinal juice and plasma; thus, it is suitable for both oral and intravenous administration. The resultant GKA-NSps displayed sustained drug release behavior and stronger in vitro cytotoxicity against 4T1, MCF-7, MDA-MB-453, HeLa, HepG2, BT474, and A549 cells than free GKA. The in vivo study in MCF-7 tumor-bearing nude mice indicated that GKA-NSps (60 mg/kg, i.v.) achieved similar therapeutic efficacy as PTX injection (8 mg/kg, i.v.) (62.09% vs. 61.27%), while the minimal lethal dose was more than 320 mg/kg, indicating good safety. By using nanotechnology, our study suggested that some antitumor flavonoids of low potency, such as GKA, are promising as safe but effective anticancer drugs.

Nanoparticles for drug delivery to the anterior segment of the eye

Commercially available ocular drug delivery systems are effective but less efficacious to manage diseases/disorders of the anterior segment of the eye. Recent advances in nanotechnology and molecular biology offer a great opportunity for efficacious ocular drug delivery for the treatments of anterior segment diseases/disorders. Nanoparticles have been designed for preparing eye drops or injectable solutions to surmount ocular obstacles faced after administration. Better drug pharmacokinetics, pharmacodynamics, non-specific toxicity, immunogenicity, and biorecognition can be achieved to improve drug efficacy when drugs are loaded in the nanoparticles. Despite the fact that a number of review articles have been published at various points in the past regarding nanoparticles for drug delivery, there is not a review yet focusing on the development of nanoparticles for ocular drug delivery to the anterior segment of the eye. This review fills in the gap and summarizes the development of nanoparticles as drug carriers for improving the penetration and bioavailability of drugs to the anterior segment of the eye.

Preparation of Vitexin Nanoparticles by Combining the Antisolvent Precipitation and High Pressure Homogenization Approaches Followed by Lyophilization for Dissolution Rate Enhancement

Vitexin, a natural flavonoid found in many medicinal plants, is well known for its rich pharmacological activities. However, the poor water solubility of vitexin has limited its therapeutic application. The aim of this study was to prepare the nanoparticles of vitexin by combining the antisolvent precipitation (ASP) and high pressure homogenization (HPH) approaches followed by lyophilization for improving the dissolution rate of this poorly water-soluble drug. The effects of main factors influencing the mean particle size (MPS) of vitexin were investigated and optimized. Under optimum conditions, vitexin nanosuspensions with an MPS of 80.5 nm were obtained and then lyophilized to form nanoparticles. The obtained vitexin nanoparticles were further characterized by scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FTIR), mass spectrometry (MS), X-ray powder diffraction (XRPD), gas chromatography (GC) and dissolution testing. The results showed that the nanoparticles of vitexin were converted into an amorphous form, with its chemical structure unchanged. Additionally, the residual dimethyl sulfoxide (DMSO) is lower than the International Conference on Harmonization (ICH) limit for class 3 solvents. The dissolution rate of processed vitexin was significantly higher (5.58-fold) than that of raw drug. Overall, the combinative process we developed is an effective way to produce vitexin nanoparticles with markedly enhanced dissolution rate.

A new strategy to sustained release of ocular drugs by one-step drug-loaded microcapsule manufacturing in hydrogel punctal plugs

PURPOSE

To design an injectable hyaluronate (HA)-based hydrogel system that contains drug-loaded microcapsules as resorbable plugs to deliver ocular drugs.

METHODS

In-situ drug-loaded, core-shell-structured chitosan (CS)@HA microcapsules were fabricated via HA hydrosol collecting in electrospun bead-rich CS fibers under continuous stirring. An injectable and cytocompatible hydrogel system with different degrees of chemical crosslinking maintained viscoelastic and sustained drug release for a long-term period of time at body temperature in vitro.

RESULTS

With the addition of adipic dihydrazide (ADH) or 1-Ethyl-3-(3-dimethyllaminopropyl) carbodiimide hydrochloride (EDCI), HA hydrosols transited from liquid to solid state at the gel point, with the G'/G″ ratio varying between 1.43 and 5.32 as a function of crosslinker concentration in the hydrogel phase. Ofloxacin (OFL) release from the mechanically mixed hydrosol system (CS-HA-A0-E0) and the micro-encapsulated hydrosol formulation (CS@HA-A0-E0) were respectively over 80% and 51% of the total drug load leaching out within 24 h. As for the drug-mixed hydrogel systems with low (CS-HA-A0.06-E0.15) and high (CS-HA-A0.06-E0.30) crosslinking density, the OFL release rate reached 38.5 and 46.6% respectively, while the micro-encapsulated hydrogel systems with low (CS@HA-A0.06-E0.15) and high (CS@HA-A0.6-E0.30) showed only (11.9 ± 2.7)% and (17.4 ± 3.5)% drug release respectively.

CONCLUSIONS

A one-step in-situ drug-capsulizing method is developed to fabricate a resorbable hydrogel punctal plug with extended drug release. The chemistry of the crosslinking reaction involves the formation of highly biocompatible HA derivatives. Thus, the hydrogel can be used directly in the tear drainage canalicular system.

Review: Emerging strategies for antimicrobial drug delivery to the ocular surface: Implications for infectious keratitis

Infectious keratitis is a medical emergency that can cause severe visual morbidity if not treated promptly. Depending upon the causative microorganism, effective management of infectious keratitis requires frequent application of antibacterial, antifungal, or antiviral eye drops, which may have low bioavailability, undesirable side effects, and poor patient compliance. Ocular formulations of antimicrobials that can increase corneal permeation and provide extended presence on ocular surface are being developed. Such formulations include nanoparticles, mucoadhesives, in situ forming hydrogels, and contact lenses. Testing of these formulations in in vitro models and ex vivo excised corneas, and in vivo rabbit testing have demonstrated increased bioavailability and extended presence on the cornea. Many of these formulations have also demonstrated success in treating infectious keratitis in animal models. However, the majority of studies have evaluated fluoroquinolone antibacterials, and more studies are needed to test the delivery of antifungal drugs. Moreover, additional efficacy data in animal models and future studies in humans to determine the duration of inhibitory concentrations of these antimicrobials in tear fluid will be required to prove the effectiveness of these formulations for clinical management of infectious keratitis.

Hypocrellin B and nano silver loaded polymeric nanoparticles: Enhanced generation of singlet oxygen for improved photodynamic therapy

A nanoparticulate photodynamic approach was employed with an objective to achieve enhanced production of singlet oxygen (¹O₂), for the management of posterior segment eye diseases like age related macular degeneration. The hypocrellin B (HB) loaded poly lactide-co-glycolide nanoparticle formulations were incorporated with nano silver (HBS-NPs). The optimized HBS-NPs contained 2.60±0.06mg/mL of HB and showed (i) 135.6 to 828.2nm size range, and (ii) negative zeta potential with a narrow polydispersity index. The DSC thermograms suggested the amorphous nature of HB inside the HBS-NPs. With the average encapsulation efficiency of 92.9±1.79%, the drug release from the HBS-NPs followed a biphasic pattern with an initial burst of 3.50% during first 8h followed by a sustained release of 47.82% within 3days. The interaction between nano silver and HB as assessed by the increase in spectral intensity of Raman spectrum demonstrates that HB may be attached over the nano silver. Generation of reactive oxygen species (ROS) by HBS-NPs was significantly higher than that of HB/HB-NPs. The singlet oxygen generating efficiency assessed using EPR spectrometer follows the order of nano silver>HB-NPs>pure HB drug solution>HBS-NPs. The HBS-NPs had a concentration and time dependent phototoxicity on A549 (human adeno lung carcinoma) cells in the presence of light providing a superior phototoxic effect (82.2% at 50μM) at 2h irradiation. The CAM treated with HBS-NPs showed a significant anti-angiogenic effect compared to a blank formulation. In vivo biodistribution studies revealed that intravenous administration of HBS-NPs lead into significant exposure to the posterior segment of the eye. This proof of principle study demonstrates that HB based nanoparticles may be a valuable new tool for application in ocular photodynamic therapy for the treatment of AMD in future.

Antifungal Therapy for Systemic Mycosis and the Nanobiotechnology Era: Improving Efficacy, Biodistribution and Toxicity

Fungal diseases have been emerging as an important public health problem worldwide with the increase in host predisposition factors due to immunological dysregulations, immunosuppressive and/or anticancer therapy. Antifungal therapy for systemic mycosis is limited, most of times expensive and causes important toxic effects. Nanotechnology has become an interesting strategy to improve efficacy of traditional antifungal drugs, which allows lower toxicity, better biodistribution, and drug targeting, with promising results in vitro and in vivo. In this review, we provide a discussion about conventional antifungal and nanoantifungal therapies for systemic mycosis.

Microfluidic Fabrication of Hydrocortisone Nanocrystals Coated with Polymeric Stabilisers

Hydrocortisone (HC) nanocrystals intended for parenteral administration of HC were produced by anti-solvent crystallisation within coaxial assemblies of pulled borosilicate glass capillaries using either co-current flow of aqueous and organic phases or counter-current flow focusing. The organic phase was composed of 7 mg/mL of HC in a 60:40 (v/v) mixture of ethanol and water and the anti-solvent was milli-Q water. The microfluidic mixers were fabricated with an orifice diameter of the inner capillary ranging from 50 µm to 400 µm and operated at the aqueous to organic phase flow rate ratio ranging from 5 to 25. The size of the nanocrystals decreased with increasing aqueous to organic flow rate ratio. The counter-current flow microfluidic mixers provided smaller nanocrystals than the co-current flow devices under the same conditions and for the same geometry, due to smaller diameter of the organic phase stream in the mixing zone. The Z-average particle size of the drug nanocrystals increased from 210–280 nm to 320–400 nm after coating the nanocrystals with 0.2 wt % aqueous solution of hydroxypropyl methylcellulose (HPMC) in a stirred vial. The differential scanning calorimetry (DSC) and X-ray powder diffraction (XRPD) analyses carried out on the dried nanocrystals stabilized with HPMC, polyvinyl pyrrolidone (PVP), and sodium lauryl sulfate (SLS) were investigated and reported. The degree of crystallinity for the processed sample was lowest for the sample stabilised with HPMC and the highest for the raw HC powder.

Morphology, in vivo distribution and antitumor activity of bexarotene nanocrystals in lung cancer

The objective of this study was to develop and evaluate the morphology, biodistribution and antitumor activity of bexarotene nanocrystals delivery system. The morphology was investigated using scanning electron microscopy (SEM), transmission electron microscopy (TEM), atomic force microscope and bexarotene nanocrystals exhibited the advantages of making the efficacy more steady and durable compared with control group in lung with less cardiac accumulation as shown by biodistribution studies in vivo. In addition, MTT assay, flow cytometry analysis, observation of morphological changes and apoptotic body demonstrated that bexarotene nanocrystals could significantly enhance the in vitro cytotoxicity and induced G1 cycle arrest and apoptosis against A549 cells. Also, bexarotene nanocrystals had significant antitumor activity in mice bearing A549 cell line. This finding was correlated with both in vitro and in vivo. Thereby, the overall results suggest that the bexarotene nanocrystals represent a potential source of medicine, which made bexarotene nanocrystals a promising candidate for the treatment of lung cancer.

Safety of nanosuspensions in drug delivery

Nanosuspension technology is currently undergoing dramatic expansion in pharmaceutical science research and development. However, most of the research efforts generally focus on formulation and potential beneficial description, while the research into potential toxicological effects and implications (i.e., in vivo safety and health effects) is lacking. This review identifies some of the key factors for studying nanosuspension safety and the potential undesired effects related to nanosuspension exposure. The key factors for discussion herein include particle characterization, preparation approach, composition, and excipients of the formulation and sterilization methods. A few comments on the primary and required safety aspects of each administration route are also reviewed.

The relevancy of controlled nanocrystallization on rifampicin characteristics and cytotoxicity

Purpose

This article investigated the influence of novel rifampicin nanosuspension (RIF NS) for enhancing drug delivery properties.

Methods

RIF NS was fabricated using the antisolvent precipitation technique. The impact of solvent type and flow rate, stabilizer type and concentration, and stirring time and apparatus together with the solvent–antisolvent volume ratio on its controlled nanocrystallization has been evaluated. NSs were characterized by transmission electron microscopy, particle size and zeta potential analysis, solubility, and dissolution profiles. The compatibility between RIF and the stabilizer was investigated via Fourier transform infrared spectroscopy and the differential scanning calorimetry techniques. The shelf-life stability of the RIF NS was assessed within a period of 3 months at different storage temperatures. Cell cytotoxicity was evaluated using 3(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide (MTT) assay on lung epithelial cells.

Results

Polyvinyl alcohol at 0.4% w/v, 1:15 methanol to deionized water volume ratio and 30-minutes sonication were the optimal parameters for RIF NS preparation. Nanocrystals were obtained with a nanometeric particle size (101 nm) and a negative zeta potential (−26 mV). NS exhibited a 50-fold enhancement in RIF solubility and 97% of RIF was dissolved after 10 minutes. The RIF NS was stable at 4±0.5°C with no significant change in particle size or zeta potential. The MTT cytotoxicity assay of RIF NS demonstrated a good safety profile and reduction in cell cytotoxicity with half maximal inhibitory concentration values of 0.5 and 0.8 mg/mL for free RIF and RIF NS, respectively.

Conclusion

A novel RIF NS could be followed as an approach for enhancing RIF physicochemical characteristics with a prominence of a safer and better drug delivery.

The role of nanotechnology in control of human diseases: perspectives in ocular surface diseases

Nanotechnology is the creation and use of materials and devices on the same scale as molecules and intracellular structures, typically less than 100 nm in size. It is an emerging science and has made its way into pharmaceuticals to significantly improve the delivery and efficacy of drugs in a number of therapeutic areas, due to development of various nanoparticle-based products. In recent years, there has been increasing evidence that nanotechnology can help to overcome many of the ocular diseases and hence researchers are keenly interested in this science. Nanomedicines offer promise as viable alternatives to conventional drops, gels or ointments to improve drug delivery to the eye. Because of their small size, they are well tolerated, thus preventing washout, increase bioavailability and also help in specific drug delivery. This review describes the application of nanotechnology in the control of human diseases with special emphasis on various eye and ocular surfaces diseases.