Emerging pollutants in the environment: present and future challenges in biomonitoring, ecological risks and bioremediation

Modulation of cell death mechanisms via α-Ag2WO4 morphology-dependent factors

The cytotoxic of α-Ag2WO4 synthesized in different morphologies (cuboidal (AW-C), hexagonal rod-like (AW-HRL) and nanometric rod-like (AW-NRL) was analyzed to understand the impact of morphological modulation on the toxicity of 3 T3 cell lines in the dark and when photoactivated by visible light. Pathways of toxicity were examined, such as parameters and electrostatic interaction, uptake, ion release and ROS production. Cytotoxicity was observed for all samples after reaching concentrations exceeding 7.8 μg/mL. Uptake tests demonstrated that the samples were not internalized by cells, likely due to their negative surface charge. AW-NRL exhibited autophagy in the absence of light and during photoactivation, primarily attributed to its ability to generate singlet oxygen. Analyzing intercellular ROS and RNS production, AW-HRL induced an increase in NO through exposure to photo-generated hydroxyl radicals, while AW-NRL showed increases only at non-photoactivated concentrations and AW-C did not exhibit increases. Interestingly, in the dark, these cells showed a low propensity for apoptosis, with late apoptosis and necrosis being more pronounced. When photoactivated, this behavior changed, revealing predominantly apoptotic and late apoptotic cell death. There is a need for an understanding of how morphology can alter the biological properties of α-Ag2WO4 to predict and optimize its effects on cellular responses.

Bioprospecting of extremophilic perchlorate-reducing bacteria: report of promising Bacillus spp. isolated from sediments of the bay of Cartagena, Colombia

Three extremophile bacterial strains (BBCOL-009, BBCOL-014 and BBCOL-015), capable of degrading high concentrations of perchlorate at a range of pH (6.5 to 10.0), were isolated from Colombian Caribbean Coast sediments. Morphological features included Gram negative strain bacilli with sizes averaged of 1.75 × 0.95, 2.32 × 0.65 and 3.08 × 0.70 μm, respectively. The reported strains tolerate a wide range of pH (6.5 to 10.0); concentrations of NaCl (3.5 to 7.5% w/v) and KClO4- (250 to 10000 mg/L), reduction of KClO4- from 10 to 25%. LB broth with NaCl (3.5-30% w/v) and KClO4- (250-10000 mg/L) were used in independent trials to evaluate susceptibility to salinity and perchlorate, respectively. Isolates increased their biomass at 7.5 % (w/v) NaCl with optimal development at 3.5 % NaCl. Subsequently, ClO4- reduction was assessed using LB medium with 3.5% NaCl and 10000 mg/L ClO4-. BBCOL-009, BBCOL-014 and BBCOL-015 achieved 10%, 17%, and 25% reduction of ClO4-, respectively. The 16 S rRNA gene sequence grouped them as Bacillus flexus T6186-2, Bacillus marisflavi TF-11 (T), and Bacillus vietnamensis 15 - 1 (T) respectively, with < 97.5% homology. In addition, antimicrobial resistance to ertapenem, vancomycine, amoxicillin clavulanate, penicillin, and erythromycin was present in all the isolates, indicating their high adaptability to stressful environments. The isolated strains from marine sediments in Cartagena Bay, Colombia are suitable candidates to reduce perchlorate contamination in different environments. Although the primary focus of the study of perchlorate-reducing and resistant bacteria is in the ecological and agricultural realms, from an astrobiological perspective, perchlorate-resistant bacteria serve as models for astrobiological investigations.

Accumulation of antibiotics in the environment: Have appropriate measures been taken to protect Canadian human and ecological health?

In Canada, every day, contaminants of emerging concern (CEC) are discharged from waste treatment facilities into freshwaters. CECs such as pharmaceutical active compounds (PhACs), personal care products (PCPs), per- and polyfluoroalkyl substances (PFAS), and microplastics are legally discharged from sewage treatment plants (STPs), water reclamation plants (WRPs), hospital wastewater treatment plants (HWWTPs), or other forms of wastewater treatment facilities (WWTFs). In 2006, the Government of Canada established the Chemicals Management Plan (CMP) to classify chemicals based on a risk-priority assessment, which ranked many CECs such as PhACs as being of low urgency, therefore permitting these substances to continue being released into the environment at unmonitored rates. The problem with ranking PhACs as a low priority is that CMP's risk management assessment overlooks the long-term environmental and synergistic effects of PhAC accumulation, such as the long-term risk of antibiotic CEC accumulation in the spread of antibiotic resistance genes. The goal of this review is to specifically investigate antibiotic CEC accumulation and associated environmental risks to human and environmental health, as well as to determine whether appropriate legislative strategies are in place within Canada's governance framework. In this research, secondary data on antibiotic CEC levels in Canadian and international wastewaters, their potential to promote antibiotic-resistant residues, associated environmental short- and long-term risks, and synergistic effects were all considered. Unlike similar past reviews, this review employed an interdisciplinary approach to propose new strategies from the perspectives of science, engineering, and law.

Delineating acetaminophen biodegradation kinetics and metabolomics using bacterial community

Acetaminophen [N-(4-hydroxyphenyl) acetamide, APAP] is an extensively and frequently consumed over-the-counter analgesic and antiphlogistic medication. It is being regarded as an emerging pollutant due to its continuous increment in the environment instigating inimical impacts on humans and the ecosystem. Considering its wide prevalence in the environment, there is an immense need of appropriate methods for the removal of APAP. The present study indulged screening and isolation of APAP degrading bacterial strains from pharmaceuticals-contaminated sites, followed by their molecular characterization via 16S rRNA sequencing. The phylogenetic analyses assigned the isolates to the genera Pseudomonas, Bacillus, Paracoccus, Agrobacterium, Brucella, Escherichia, and Enterobacter based on genetic relatedness. The efficacy of these strains in batch cultures tested through High-performance Liquid Chromatography (HPLC) revealed Paracoccus sp. and Enterobacter sp. as the most promising bacterial isolates degrading up to 88.96 and 85.92%, respectively of 300 mg L-1 of APAP within 8 days of incubation. Michaelis-Menten kinetics model parameters also elucidated the high degradation potential of these isolates. The major metabolites identified through FTIR and GC-MS analyses were 4-aminophenol, hydroquinone, and 3-hydroxy-2,4-hexadienedioic. Therefore, the outcomes of this comprehensive investigation will be of paramount significance in formulating strategies for the bioremediation of acetaminophen-contaminated sites through a natural augmentation process via native bacterial strains.

A MXene Hydrogel-Based Versatile Microrobot for Controllable Water Pollution Management

The urgent demand for addressing dye contaminants in water necessitates the development of microrobots that exhibit remote navigation, rapid removal, and molecular identification capabilities. The progress of microrobot development is currently hindered by the scarcity of multifunctional materials. In this study, a plasmonic MXene hydrogel (PM-Gel) is synthesized by combining bimetallic nanocubes and Ti3C2Tx MXene through the rapid gelation of degradable alginate. The hydrogel can efficiently adsorb over 60% of dye contaminants within 2 min, ultimately achieving a removal rate of >90%. Meanwhile, the hydrogel exhibits excellent sensitivity in surface enhanced Raman scattering (SERS) detection, with a limit of detection (LOD) as low as 3.76 am. The properties of the plasmonic hydrogel can be further adjusted for various applications. As a proof-of-concept experiment, thermosensitive polymers and superparamagnetic particles are successfully integrated into this hydrogel to construct a versatile, light-responsive microrobot for dye contaminants. With magnetic and optical actuation, the robot can remotely sample, identify, and remove pollutants in maze-like channels. Moreover, light-driven hydrophilic-hydrophobic switch of the microrobots through photothermal effect can further enhance the adsorption capacity and reduced the dye residue by up to 58%. These findings indicate of a broad application potential in complex real-world environments.

Constructed wetlands for the removal of organic micropollutants from wastewater: Current status, progress, and challenges

In this work, the practical utility of constructed wetlands (CWs) is described as a promising treatment option for micropollutants (MPs) in wastewater with the aid of their eco-friendly, low-energy, economically feasible, and ecologically sustainable nature. This paper offers a comprehensive review on CW technology with respect to the key strategies for MP removal such as phytoremediation, substrate adsorption, and microbial degradation. It explores the important factors controlling the performance of CWs (e.g., in terms of configurations, substrates, plant-microbe interactions, temperature, pH, oxygen levels, hydraulic loading rate, and retention time) along with the discussions on the pivotal role of microbial populations in CWs and plant-microbe cooperative remediation dynamics, particularly in relation to diverse organic MP patterns in CWs. As such, this review aims to provide valuable insights into the key strategies for optimizing MP treatment and for enhancing the efficacy of CW systems. In addition, the process-based models of constructed wetlands along with the numerical simulations based on the artificial neural network (ANN) method are also described in association with the data exploratory techniques. This work is thus expected to help open up new possibilities for the application of plant-microbe cooperative remediation approaches against diverse patterns of organic MPs present in CWs.

Sustainable Lignin-Reinforced Chitosan Membranes for Efficient Cr(VI) Water Remediation

The pollution of aquatic environments is a growing problem linked to population growth and intense anthropogenic activities. Because of their potential impact on human health and the environment, special attention is paid to contaminants of emerging concern, namely heavy metals. Thus, this work proposes the use of naturally derived materials capable of adsorbing chromium (VI) (Cr(VI)), a contaminant known for its potential toxicity and carcinogenic effects, providing a sustainable alternative for water remediation. For this purpose, membranes based on chitosan (CS) and chitosan/Kraft lignin (CS/KL) with different percentages of lignin (0.01 and 0.05 g) were developed using the solvent casting technique. The introduction of lignin imparts mechanical strength and reduces swelling in pristine chitosan. The CS and CS/0.01 KL membranes performed excellently, removing Cr(VI) at an initial 5 mg/L concentration. After 5 h of contact time, they showed about 100% removal. The adsorption process was analyzed using the pseudo-first-order model, and the interaction between the polymer matrix and the contaminant was attributed to electrostatic interactions. Therefore, CS and CS/KL membranes could be low-cost and efficient adsorbents for heavy metals in wastewater treatment applications.

Engineering natural microbiomes toward enhanced bioremediation by microbiome modeling

Engineering natural microbiomes for biotechnological applications remains challenging, as metabolic interactions within microbiomes are largely unknown, and practical principles and tools for microbiome engineering are still lacking. Here, we present a combinatory top-down and bottom-up framework to engineer natural microbiomes for the construction of function-enhanced synthetic microbiomes. We show that application of herbicide and herbicide-degrader inoculation drives a convergent succession of different natural microbiomes toward functional microbiomes (e.g., enhanced bioremediation of herbicide-contaminated soils). We develop a metabolic modeling pipeline, SuperCC, that can be used to document metabolic interactions within microbiomes and to simulate the performances of different microbiomes. Using SuperCC, we construct bioremediation-enhanced synthetic microbiomes based on 18 keystone species identified from natural microbiomes. Our results highlight the importance of metabolic interactions in shaping microbiome functions and provide practical guidance for engineering natural microbiomes.

Comparative study of emerging pollutants of interest in the groundwater of the volcanic islands of La Palma and El Hierro (Canary Islands)

Emerging pollutants (EPs) include a wide array of chemical compounds, as well as some microorganisms, which presence was unknown or unmeasurable until recently, or have recently started to be considered a threat towards the environment or animal and human health. No clear or homogeneous regulations exist for their measurement or control, and efforts should be made to assess their presence and offer solutions for their safe management, as well as to achieve an optimal protection of water resources. A previous study performed by our research group thoroughly studied a wide profile of EPs in El Hierro Island (Canary Islands) for the first time. Now, we present the study of the same panel of 70 EPs in La Palma Island (Canary Islands). 14 samples were collected in 2021, at different locations in La Palma island, representing seven municipalities (Los Llanos de Aridane, Santa Cruz de la Palma, El Paso, Breña Baja, Tazacorte, Barlovento and Fuencaliente) and four installation types (Piezometers/Wells, Wastewater Treatment Plant (WWTP), Water Gallery and Water Springs). High performance liquid chromatography-mass spectrometry (HPLC-MS) was performed to analyse the EP array, which included five chemical families: UV filters, UV blockers/stabilizers, parabens, Pharmaceutical Active Compounds (PhACs) and pesticides. Subsequently, a comprehensive descriptive and statistical analysis, including different tests was performed on the data obtained. Heterogeneous concentration levels of the EPs studied were found based on municipality and installation type among the island, with some of the PhACs and UV blockers/stabilizers showing very high levels, especially at Breña Baja and wastewater treatment plants (WWTPs). It is worth noting that some of the samples comprised within the WWTPs category were collected outside the treatment plant, after water has been treated, so they should not bear dangerous concentrations of any hazardous compound. The high presence of two pesticides, imidacloprid (ranging from 68.7 to 24,896.5 ng⋅L-1) and acetamiprid (ranging from 1010.7 to 5168.1 ng⋅L-1) was worth highlighting too. In addition, three EP concentration clusters were found to virtually divide the island based on mathematical percentiles of EP mean concentrations, which can help gain more insight into the contamination status of the island and measures that could be taken for their management. Finally, a comparison between La Palma results and the profile observed at El Hierro by our research group was presented. Altogether, the study performed calls for a need to take actions towards avoiding entrance of EPs in the water cycle, and not just focusing on remediation strategies once they have reached the groundwater, freshwater or soil.

MXene/ZnS/chitosan-cellulose composite with Schottky heterostructure for efficient removal of anionic dyes by synergistic effect of adsorption and photocatalytic degradation

Nowadays, dye water pollution is becoming increasingly severe. Composite of MXene, ZnS, and chitosan-cellulose material (MX/ZnS/CC) was developed to remove anionic dyes through the synergistic effect of adsorption and photocatalytic degradation. MXene was introduced as the cocatalyst to form Schottky heterostructure with ZnS for improving the separation efficiency of photocarriers and photocatalytic performance. Chitosan-cellulose material mainly served as the dye adsorbent, while also could improve material stability and assist in generation of free radicals for dye degradation. The physics and chemistry properties of MX/ZnS/CC composite were systematically inspected through various characterizations. MX/ZnS/CC composite exhibited good adsorption ability to anionic dyes with adsorption capacity up to 1.29 g/g, and excellent synergistic effects of adsorption and photodegradation with synergistic removal capacity up to 5.63 g/g. MX/ZnS/CC composite performed higher synergistic removal ability and better optical and electrical properties than pure MXene, ZnS, chitosan-cellulose material, and MXene/ZnS. After compounding, the synergistic removal percentage of dyes increased by a maximum of 309 %. MX/ZnS/CC composite mainly adsorbs anionic dyes through electrostatic interactions and catalyzes the generation of •O2-, h+, and •OH to degrade dyes, which has been successfully used to remove anionic dyes from environmental water, achieving a 100 % removal of 50 mg/L dye.

Developing an Approach for Integrating Chemical Analysis and Transcriptional Changes to Assess Contaminants in Water, Sediment, and Fish

Pharmaceuticals in aquatic environments pose threats to aquatic organisms because of their continuous release and potential accumulation. Monitoring methods for these contaminants are inadequate, with targeted analyses falling short in assessing water quality's impact on biota. The present study advocates for integrated strategies combining suspect and targeted chemical analyses with molecular biomarker approaches to better understand the risks posed by complex chemical mixtures to nontarget organisms. The research aimed to integrate chemical analysis and transcriptome changes in fathead minnows to prioritize contaminants, assess their effects, and apply this strategy in Wascana Creek, Canada. Analysis revealed higher pharmaceutical concentrations downstream of a wastewater-treatment plant, with clozapine being the most abundant in fathead minnows, showing notable bioavailability from water and sediment sources. Considering the importance of bioaccumulation factor and biota-sediment accumulation factor in risk assessment, these coefficients were calculated based on field data collected during spring, summer, and fall seasons in 2021. Bioaccumulation was classified as very bioaccumulative with values >5000 L kg-1, suggesting the ability of pharmaceuticals to accumulate in aquatic organisms. The study highlighted the intricate relationship between nutrient availability, water quality, and key pathways affected by pharmaceuticals, personal care products, and rubber components. Prioritization of these chemicals was done through suspect analysis, supported by identifying perturbed pathways (specifically signaling and cellular processes) using transcriptomic analysis in exposed fish. This strategy not only aids in environmental risk assessment but also serves as a practical model for other watersheds, streamlining risk-assessment processes to identify environmental hazards and work toward reducing risks from contaminants of emerging concern. Environ Toxicol Chem 2024;00:1-22. © 2024 SETAC.

A Dangerous Couple: Sequential Effect of Phosphorus Flame-Retardant and Polyurethane Decrease Locomotor Activity in Planarian Girardia tigrina

Understanding the interplay among organophosphorus flame retardants (OPFRs), microplastics, and freshwater organisms is crucial for unravelling the dynamics within freshwater environments and foreseeing the potential impacts of organic pollutants and plastic contamination. For that purpose, the present research assessed the exposure impact of 10 mg L-1 flame-retardant aluminium diethylphosphinate (ALPI), 10 μg mg-1liver microplastics polyurethane (PU), and the combination of ALPI and PU on the freshwater planarian Girardia tigrina. The exposure to both ALPI and PU revealed a sequential effect, i.e., a decrease in locomotor activity, while oxidative stress biomarkers (total glutathione, catalase, glutathione S-transferase, lipid peroxidation) and metabolic responses (cholinesterase activity, electron transport system, and lactate dehydrogenase) remained unaffected. Despite this fact, it was possible to observe that the range of physiological responses in exposed organisms varied, in particular in the cases of the electron transport system, cholinesterase activity, glutathione S-transferase, catalase, and levels of total glutathione and proteins, showing that the energetic costs for detoxification and antioxidant capacity might be causing a lesser amount of energy allocated for the planarian activity. By examining the physiological, behavioural, and ecological responses of planarians to these pollutants, insights can be gained into broader ecosystem-level effects and inform strategies for mitigating environmental risks associated with OPFRs and microplastic pollution in freshwater environments.

Recent Advancement in Emerging MXene-Based Photocatalytic Membrane for Revolutionizing Wastewater Treatment

MXene-based photocatalytic membranes provide significant benefits for wastewater treatment by effectively combining membrane separation and photocatalytic degradation processes. MXene represents a pioneering 2D photocatalyst with a variable elemental composition, substantial surface area, abundant surface terminations, and exceptional photoelectric performance, offering significant advantages in producing high-performance photocatalytic membranes. In this review, an in-depth overview of the latest scientific progress in MXene-based photocatalytic membranes is provided. Initially, a brief introduction to the structure and photocatalytic capabilities of MXene is provided, highlighting their pivotal role in promoting the photocatalytic process. Subsequently, in pursuit of the optimal MXene-based photocatalytic membrane, critical factors such as the morphology, hydrophilicity, and stability of MXenes are meticulously taken into account. Various preparation strategies for MXene-based photocatalytic membranes, including blending, vacuum filtration, and dip coating, are also discussed. Furthermore, the application and mechanism of MXene-based photocatalytic membranes in micropollutant removal, oil-water separation, and antibacterial are examined. Lastly, the challenges in the development and practical application of MXene-based photocatalytic membranes, as well as their future research direction are delineated.

Effects of dissolved organic matter and halogen ions on phototransformation of pharmaceuticals and personal care products in aquatic environments

Photochemical reactions contribute to the attenuation and transformation of pharmaceuticals and personal care products (PPCPs) in surface natural waters. Nevertheless, effects of DOM and halogen ions on phototransformation of PPCPs remain elusive. This work selected disparate PPCPs as target pollutants to investigate their aquatic phototransformation processes. Results show that PPCPs containing multiple electron-donating groups (-OH, -NH2, -OR, etc.) are more reactive with photochemically produced reactive intermediates (PPRIs) such as triplet DOM (3DOM*), singlet oxygen (1O2), and reactive halogen species (RHSs), relative to PPCPs containing electron-withdrawing groups (-NOR, -COOR, -OCR, etc.). The generation of RHSs as a result of the coexistance of DOM and halide ions changed the contribution of PPRIs to the photochemical conversion of PPCPs during their migration from fresh water to seawater. For PPCPs (AMP, SMZ, PN, NOR, CIP, etc) with highly reactive groups toward RHSs, the generation of RHSs facilitated their photolysis in halide ion-rich waters, where Cl- plays a critical role in the photochemical transformation of PPCPs. Density functional theory (DFT) calculations showed that single electron transfer and H-abstraction are main reaction pathways of RHSs with the PPCPs. These results demonstate the irreplaceable roles of PPRIs and revealing the underlying reaction mechanisms during the phototransformation of PPCPs, which contributes to a better understanding of the environmental behaviors of PPCPs in complex aquatic environments.

Metal Toxicity: Effects on Energy Metabolism in Fish

Metals are dispersed in natural environments, particularly in the aquatic environment, and accumulate, causing adverse effects on aquatic life. Moreover, chronic polymetallic water pollution is a common problem, and the biological effects of exposure to complex mixtures of metals are the most difficult to interpret. In this review, metal toxicity is examined with a focus on its impact on energy metabolism. Mechanisms regulating adenosine triphosphate (ATP) production and reactive oxygen species (ROS) emission are considered in their dual roles in the development of cytotoxicity and cytoprotection, and mitochondria may become target organelles of metal toxicity when the transmembrane potential is reduced below its phosphorylation level. One of the main consequences of metal toxicity is additional energy costs, and the metabolic load can lead to the disruption of oxidative metabolism and enhanced anaerobiosis.

Asphaltene-derived nanocomposites for the removal of emerging pollutants and its antimicrobial effects: batch and continuous column studies

Emerging contaminants are diverse ecotoxic materials requiring unique treatment for removal. Asphaltenes are environmentally hazardous carbon-rich solid waste product of the petroleum industry. In the current work, asphaltene-derived activated carbon (AC) was loaded with silver (Ag/AC) and used to remove amoxicillin (AMX) and tetracycline (TC) from aqueous phase. The prepared Ag/AC was characterised using FESEM, FTIR, XRD and surface area analysis. The FESEM micrographs confirmed the spherical silver nanoparticle-laden porous AC, and the BET surface area was found to be 213 m2/g. Batch adsorption studies were performed, and the equilibrium data were fit into adsorption isotherm and kinetic models. The Ag/AC exhibited superior monolayer adsorption capacity of 1012 mg/g and 770 mg/g for AMX and TC, respectively. The continuous column studies were also performed to evaluate the breakthrough parameters. Furthermore, the antimicrobial activity of the adsorbent was evaluated using zone of inhibition studies. Ag/AC was found to have an 8-mm-diameter zone of microbial inhibition. The obtained results showed that Ag/AC was a promising material for the removal of antibiotics and inhibition of resistance-developed mutated microbes in effluent water.

Harnessing the power of bacterial laccases for xenobiotic degradation in water: A 10-year overview

Industrialization and population growth are leading to the production of significant amounts of sewage containing hazardous xenobiotic compounds. These compounds pose a threat to human and animal health, as well as the overall ecosystem. To combat this issue, chemical, physical, and biological techniques have been used to remove these contaminants from water bodies affected by human activity. Biotechnological methods have proven effective in utilizing microorganisms and enzymes, particularly laccases, to address this problem. Laccases possess versatile enzymatic characteristics and have shown promise in degrading different xenobiotic compounds found in municipal, industrial, and medical wastewater. Both free enzymes and crude enzyme extracts have demonstrated success in the biotransformation of these compounds. Despite these advancements, the widespread use of laccases for bioremediation and wastewater treatment faces challenges due to the complex composition, high salt concentration, and extreme pH often present in contaminated media. These factors negatively impact protein stability, recovery, and recycling processes, hindering their large-scale application. These issues can be addressed by focusing on large-scale production, resolving operation problems, and utilizing cutting-edge genetic and protein engineering techniques. Additionally, finding novel sources of laccases, understanding their biochemical properties, enhancing their catalytic activity and thermostability, and improving their production processes are crucial steps towards overcoming these limitations. By doing so, enzyme-based biological degradation processes can be improved, resulting in more efficient removal of xenobiotics from water systems. This review summarizes the latest research on bacterial laccases over the past decade. It covers the advancements in identifying their structures, characterizing their biochemical properties, exploring their modes of action, and discovering their potential applications in the biotransformation and bioremediation of xenobiotic pollutants commonly present in water sources.

Microbial consortia-mediated arsenic bioremediation in agricultural soils: Current status, challenges, and solutions

Arsenic poisoning in agricultural soil is caused by both natural and man-made processes, and it poses a major risk to crop production and human health. Soil quality, agricultural production, runoff, ingestion, leaching, and absorption by plants are all influenced by these processes. Microbial consortia have become a feasible bioremediation technique in response to the urgent need for appropriate remediation solutions. These diverse microbial populations collaborate to combat arsenic poisoning in soil by facilitating mechanisms including oxidation-reduction, methylation-demethylation, volatilization, immobilization, and arsenic mobilization. The current state, problems, and remedies for employing microbial consortia in arsenic bioremediation in agricultural soils are examined in this review. Among the elements affecting their success include diversity, activity, community organization, and environmental conditions. Also, we emphasize the sensitivity and accuracy limits of existing assessment techniques. While earlier reviews have addressed a variety of arsenic remediation options, this study stands out by concentrating on microbial consortia as a viable strategy for arsenic removal and presents performance evaluation and technical problems. This work gives vital insights for tackling the major issue of arsenic pollution in agricultural soils by explaining the potential methods and components involved in microbial consortium-mediated arsenic bioremediation.

Nonylphenol and its derivatives: Environmental distribution, treatment strategy, management and future perspectives

In recent years, emerging pollutants, including nonylphenol (NP) and nonylphenol ethoxylate (NPE), have become a prominent topic. These substances are also classified as persistent organic pollutants. NP significantly affects the hormone secretion of organisms and exhibits neurotoxicity, which can affect the human hippocampus. Therefore, various countries are paying increased attention to NP regulation. NPEs are precursors of NPs and are widely used in the manufacture of various detergents and lubricants. NPEs can easily decompose into NPs, which possess strong biological and environmental toxicity. This review primarily addresses the distribution, toxicity mechanisms and performance, degradation technologies, management policies, and green alternative reagents of NPs and NPEs. Traditional treatment measures have been unable to completely remove NP from wastewater. With the progressively tightening management and regulatory policies, identifying proficient and convenient treatment methods and a sustainable substitute reagent with comparable product effectiveness is crucial.

Effects of coal-fired power plants on soil microbial diversity and community structures

Long-term deposition of atmospheric pollutants emitted from coal combustion and their effects on the eco-environment have been extensively studied around coal-fired power plants. However, the effects of coal-fired power plants on soil microbial communities have received little attention through atmospheric pollutant deposition and coal-stacking. Here, we collected the samples of power plant soils (PS), coal-stacking soils (CSS) and agricultural soils (AS) around three coal-fired power plants and background control soils (BG) in Huainan, a typical mineral resource-based city in East China, and investigated the microbial diversity and community structures through a high-throughput sequencing technique. Coal-stacking significantly increased (p < 0.05) the contents of total carbon, total nitrogen, total sulfur and Mo in the soils, whereas the deposition of atmospheric pollutants enhanced the levels of V, Cu, Zn and Pb. Proteobacteria, Actinobacteria, Thaumarchaeota, Thermoplasmata, Ascomycota and Basidiomycota were the dominant taxa in all soils. The bacterial community showed significant differences (p < 0.05) among PS, CSS, AS and BG, whereas archaeal and fungal communities showed significant differences (p < 0.01) according to soil samples around three coal-fired power plants. The predominant environmental variables affecting soil bacterial, archaeal and fungal communities were Mo-TN-TS, Cu-V-Mo, and organic matter (OM)-Mo, respectively. Certain soil microbial genera were closely related to multiple key factors associated with stacking coal and heavy metal deposition from power plants. This study provided useful insight into better understanding of the relationships between soil microbial communities and long-term disturbances from coal-fired power plants.

Bibliometric analysis of Advanced Oxidation Processes studies with a focus on Life Cycle Assessment and Costs

Advanced oxidation processes (AOPs) are wastewater treatment technologies that stand out for their ability to degrade Contaminants of Emerging Concern (CECs). The literature has extensively investigated these removal processes for different aqueous matrices. Once technically mature, some of these systems have become accredited to be applied on a large scale, and therefore, their systemic performances in the environmental and cost spheres have also become essential requirements. This study proposed corroborating this trend, analyzing the available literature on the subject to verify how experts in the AOP area investigated this integration during 2015-2023. For this purpose, a sample of publications was treated by applying the Systematic Review (SR) methodology. This resulted in an extract of 83 studies that adopted life-cycle logic to estimate environmental impacts and process costs or evaluated them as complementary to the technical dimension of each treatment technology. This analysis found that both dimensions can be used for selecting or sizing AOPs at the design scale. However, the appropriate choice of the impact categories for the environmental assessment and establishing a methodology for cost analysis can make the approach still more effective. In addition, a staggering number of processes would broaden the reality and applicability of the estimates, and adopting multicriteria analysis methodologies could address essential aspects of decision-making processes during the design of the arrangements. By meeting the original purposes, the study broadened the requirements for designing AOPs and disseminating their use in mitigating the discharge of CECs.

Occurrence, seasonal variation and gas/particle partitioning of current used pesticides (CUPs) across 60 °C temperature and 30° latitudes in China

Gas and particle phases samples were collected at three sites in China in 2019-2020, with 60 °C temperature span and 30° latitude range. Totally, among 76 target current used pesticides (CUPs) with four types, 51 were quantified in at least one sample. The concentrations of individual CUPs ranged from 8 orders of magnitude, indicating different pollution levels. Herbicides were the dominated CUPs in Northeast China, while higher concentrations of fungicides were found in Southeast China. The highest concentrations of CUPs were observed in Southeast China in spring and winter, while in summer and autumn in Northeast China, caused by local climates and crop cultivation patterns. The gas/particle (G/P) partitioning of CUPs was mainly influenced by their physicochemical properties and ambient temperature. The G/P partitioning study indicated that the L-M-Y model was the optimum prediction model for herbicides, fungicides and pyrethroids. The L-M-Y model and the H-B model presented equal performance for organophosphate insecticides. To our knowledge, the L-M-Y model was firstly applied for the study of the G/P partitioning of CUPs, which provided new insights into the related fields of new emergency contaminates.

A systematic review of pharmaceutical and personal care products as emerging contaminants in waters: The panorama of West Africa

Pharmaceutical and Personal Care Products (PPCPs) are widely used to prevent or treat human and animal diseases, thereby improving the quality of daily life. Poor management of post-consumer products is recognized worldwide, as they negatively affect the ecosystems where they are discharged. The first action to prevent negative impacts is the state of knowledge regarding their occurrence. This paper critically reports the panorama of West Africa in terms of PPCPs occurrence in different water sources. To achieve this objective, a systematic review was conducted on PPCPs in West Africa following the PRISMA guidelines. Databases, including African Journals Online, PubMed, Google Scholar, Scopus, and Dimensions, were used for this search. Thirty-five articles, representing 58 % of West African countries, were selected according to the inclusion and exclusion criteria. Of these articles, one included data from multiple West African countries, while the remaining 34 exclusively focused on Benin, Cameroon, Ghana, and Nigeria. The results revealed a variety of PPCPs investigated, about 27 groups and 112 compounds, with greater emphasis on antibiotics, analgesics and PSHXEs. HPLC was the predominant analytical method used, resulting in total concentrations of PPCPs in the range of 200,000 to 3,200,000 ng/L in drinking water, 12 to 700,000 ng/L in groundwater, 0.42 to 107,800,000 ng/L in surface water, 8.5 to 121,310,000 ng/L in wastewater, and 440 to 421,700 ng/L in tap water. Ghana, Nigeria and Cameroon reported the highest number of PPCPs investigated and consequently the highest concentration of cases. These compounds present a high potential ecological risk, with >50 % exceeding the risk quotient limit. Therefore, West Africa as a community needs integrated approaches and strategies to monitor water, especially transboundary resources. This review is timely and provides pertinent information to policymakers and researchers on PPCPs in water.

Emerging contaminants and their potential impacts on estuarine ecosystems: Are we aware of it?

Emerging contaminants (ECs) are becoming more prevalent in estuaries and constitute a danger to both human health and ecosystems. These pollutants can infiltrate the ecosystem and spread throughout the food chain. Because of the diversified sources and extensive human activities, estuaries are particularly susceptible to increased pollution levels. A thorough review on recent ECs (platinum group elements, pharmaceuticals and personal care products, pesticides, siloxanes, liquid crystal monomers, cationic surfactant, antibiotic resistance genes, and microplastics) in estuaries, including their incidence, detection levels, and toxic effects, was performed. The inclusion of studies from different regions highlights the global nature of this issue, with each location having its unique set of contaminants. The diverse range of contaminants detected in estuary samples worldwide underscores the intricacy of ECs. A significant drawback is the scarcity of research on the toxic mechanisms of ECs on estuarine organisms, the prospect of unidentified ECs, warrant research scopes.

Advances in identifying and managing emerging contaminants in aquatic ecosystems: Analytical approaches, toxicity assessment, transformation pathways, environmental fate, and remediation strategies

Emerging contaminants (ECs) are increasingly recognized as threats to human health and ecosystems. This review evaluates advanced analytical methods, particularly mass spectrometry, for detecting ECs and understanding their toxicity, transformation pathways, and environmental distribution. Our findings underscore the reliability of current techniques and the potential of upcoming methods. The adverse effects of ECs on aquatic life necessitate both in vitro and in vivo toxicity assessments. Evaluating the distribution and degradation of ECs reveals that they undergo physical, chemical, and biological transformations. Remediation strategies such as advanced oxidation, adsorption, and membrane bioreactors effectively treat EC-contaminated waters, with combinations of these techniques showing the highest efficacy. To minimize the impact of ECs, a proactive approach involving monitoring, regulations, and public education is vital. Future research should prioritize the refining of detection methods and formulation of robust policies for EC management.

Determination of the Toxic Effects of Heavy Metals on the Morpho-Anatomical Responses of the Leaf of Typha latifolia as a Biomonitoring Tool

Typha latifolia leaves act as sensitive barometers for trace heavy metal pollution, as revealed by their pronounced anatomical responses in a constructed wetland. Monthly water samples and Typha latifolia leaf tissue were collected over three consecutive months in 2018 from the Burgas Lake wetlands (Taoura), northeast Algeria. While physical and chemical parameters improved after treatment, atomic absorption spectrometry (Perkin Elmer A Analyst 800 AAS) detected persistent trace levels of cadmium, chromium, and lead in both the treated water and leaf tissue, highlighting the need for continued phytoremediation efforts. Microscopic examination of leaf tissue exposed to these metals revealed distinct anatomical adaptations, including shrunken vascular bundles, altered cell shapes, and stomatal closure. These findings underscore Typha latifolia's effectiveness in accumulating heavy metals and its potential as a highly sensitive biomonitor for persistent pollution in lake ecosystems.

Degree of human activity exert differentiated influence on conventional and emerging pollutants in drinking water source

Anthropogenic pollution poses a significant threat to drinking water sources worldwide. Previous studies have focused on the occurrence of pollutants in drinking water sources, but the impact of human activities on different types of pollutants in drinking water sources is still unclear. In this study, we chose the upper reaches of the Dongjiang River (URDR) as a case study to investigate the distribution characteristics of conventional pollutants, pesticides, and antibiotics along the gradient of human intervention. Our findings reveal that human activities can effect both conventional pollutants and emerging pollutants in the URDR to varying degrees. The escalation of human activities correlates with a rising trend in conventional pollutants, such as nitrogen (N) and phosphorus (P). Notably, only C1 (terrestrial humus) in dissolved organic matter (DOM) exhibits this increasing pattern. Pesticide and antibiotic concentrations are highest in areas with moderate and high levels of human activity, respectively, and the degree of eutrophication of drinking water closely follows the gradient of human activity. Our results also indicate that most pesticides pose a significant risk in the URDR, particularly pyrethroid pesticides (PYRs). Out of all antibiotics, only Norfloxacin (NFX) and Penicillin G (PENG) are classified as high-risk, with NFX exhibiting significant variation across different degrees of human activity. C1 and TP were the most important factors affecting the distribution of organophosphorus (OPPs) and PYRs, respectively. In conclusion, varying degrees of human activity exert differentiated influences on conventional and emerging pollutants in drinking water sources.

LED-driven photo-Fenton process for micropollutant removal by nanostructured magnetite anchored in mesoporous silica

The presence of organic micropollutants in water bodies represents a threat to living organisms and ecosystems due to their toxicological effects and recalcitrance in conventional wastewater treatments. In this context, the application of heterogeneous photo-Fenton based on magnetite nanoparticles supported on mesoporous silica (SBA15) is proposed to carry out the non-specific degradation of the model compounds ibuprofen, carbamazepine, hormones, bisphenol A and the dye ProcionRed®. The operating conditions (i.e., pH, catalyst load and hydrogen peroxide concentration) were optimized by Response Surface Methodology (RSM). The paramagnetic properties of the nanocatalysts allowed their repeated use in sequential batch operations with catalyst losses below 1%. The feasibility of the process was demonstrated as removal rates above 90% after twelve accomplished after twelve consecutive cycles. In addition, the contributions of different reactive oxygen species, mainly •OH, were analyzed together with the formation of by-products, achieving total mineralization values of 15% on average.

A systematic review on the current situation of emerging pollutants in Mexico: A perspective on policies, regulation, detection, and elimination in water and wastewater

Emerging pollutants (EPs) emerged as a group of new compounds whose presence in the environment has been widely detected in Mexico. In this country, different concentrations of pharmaceutical compounds, pesticides, dyes, and microplastics have been reported, which vary depending on the region and the analyzed matrix (i.e., wastewater, surface water, groundwater). The evidence of the EPs' presence focuses on the detection of them, but there is a gap in information regarding is biomonitoring and their effects in health in Mexico. The presence of these pollutants in the country associated with lack of proper regulations in the discharge and disposal of EPs. Therefore, this review aims to provide a comprehensive view of the current environmental status, policies, and frameworks regarding Mexico's situation. The review also highlights the lack of information about biomonitoring since EPs are present in water even after their treatment, leading to a critical situation, which is high exposure to humans and animals. Although, technologies to efficiently eliminate EPs are available, their application has been reported only at a laboratory scale thus far. Here, an overview of health and environmental impacts and a summary of the research works reported in Mexico from 2014 to 2023 were presented. This review concludes with a concrete point of view and perspective on the status of the EPs' research in Mexico as an alert for government entities about the necessity of measures to control the EPs disposal and treatment.

Review on heavy metal contaminants in freshwater fish in South India: current situation and future perspective

The primary natural resource we use in our daily lives for a variety of activities is freshwater for drinking and various developmental goals. Furthermore, the pace of human population increase worldwide is rising rapidly and has a great impact on the Earth's natural resources. Natural water quality has diminished owing to various anthropogenic activities. Water is crucial to the life cycle. On the other hand, chemical and agricultural industries pollute heavy metals. Acute and chronic diseases caused by heavy metals, such as slow metabolism and damage to the gills and epithelial layer of fish species, are divided into two categories. Pollutants can also harm liver tissues and result in ulceration as well as diseases such as fin rot, tail rot, and gill disease. The most prevalent heavy metals are As, Cr, Pb, and Hg, which are systemic toxicants that affect human health. These metals are categorized as carcinogens by the US Environmental Protection Agency and the worldwide agency for cancer research because they cause organ damage even at low exposure levels. The focus of the current study is to review various freshwater sources of heavy metal pollution.

A mini review of recent progress in the removal of emerging contaminants from pharmaceutical waste using various adsorbents

The presence of emerging contaminants (ECs) originating from pharmaceutical waste in water, wastewater, and marine ecosystems at various geographical locations has been clearly publicised. This review paper presents an overview of current monitoring data on the occurrences and distributions of ECs in coastal ecosystem, tap water, surface water, ground water, treated sewage effluents, and other sources. Technological advancements for EC removal are also presented, which include physical, chemical, biological, and hybrid treatments. Adsorption remains the most effective method to remove ECs from water bodies. Various types of adsorbents, such as activated carbons, biochars, nanoadsorbents (carbon nanotubes and graphene), ordered mesoporous carbons, molecular imprinting polymers, clays, zeolites, and metal-organic frameworks have been extensively used for removing ECs from water sources and wastewater. Extensive findings on adsorptive performances, process efficiency, reusability properties, and other related information are thoroughly discussed in this mini review.

Application of high-throughput sequencing technologies and analytical tools for pathogen detection in urban water systems: Progress and future perspectives

The ubiquitous presence of pathogenic microorganisms, such as viruses, bacteria, fungi, and protozoa, in urban water systems poses a significant risk to public health. The emergence of infectious waterborne diseases mediated by urban water systems has become one of the leading global causes of mortality. However, the detection and monitoring of these pathogenic microorganisms have been limited by the complexity and diversity in the environmental samples. Conventional methods were restricted by long assay time, high benchmarks of identification, and narrow application sceneries. Novel technologies, such as high-throughput sequencing technologies, enable potentially full-spectrum detection of trace pathogenic microorganisms in complex environmental matrices. This review discusses the current state of high-throughput sequencing technologies for identifying pathogenic microorganisms in urban water systems with a concise summary. Furthermore, future perspectives in pathogen research emphasize the need for detection methods with high accuracy and sensitivity, the establishment of precise detection standards and procedures, and the significance of bioinformatics software and platforms. We have compiled a list of pathogens analysis software/platforms/databases that boast robust engines and high accuracy for preference. We highlight the significance of analyses by combining targeted and non-targeted sequencing technologies, short and long reads technologies, sequencing technologies, and bioinformatic tools in pursuing upgraded biosafety in urban water systems.

Endocrine disrupting chemicals in wastewater treatment plants in Kenya, East Africa: Concentrations, removal efficiency, mass loading rates and ecological impacts

This study investigated the levels, mass loadings, removal efficiency, and associated ecotoxicological risks of selected endocrine disrupting chemicals (EDCs), namely, dibutylphthalate (DBP), diethylhexylphthalate (DEHP), dimethylphthalate (DMP), linuron (LNR) and progesterone (PGT) in wastewater, sludge, and untreated dry biosolid (UDBS) samples from twelve wastewater treatment plants (WWTPs) in nine major towns in Kenya. Analysis was done using high-performance liquid chromatography coupled with triple quadrupole mass spectrometry (LC-MS/MS). All the wastewater influents had quantifiable levels of EDCs with DBP being the most abundant (37.49%) with a range of 4.33 ± 0.63 to 19.68 ± 1.24 μg L-1. DEHP was the most abundant in sludge and accounted for 48.2% ranging between 278.67 and 9243.49 ng g-1 dry weight (dw). In the UDBS samples, DEHP was also the most abundant (40%) of the total EDCs detected with levels ranging from 78.77 to 3938.54 ng g-1 dw. The average removal efficiency per pollutant was as follows: DMP (98.7%) > DEHP (91.7%) > PGT (83.4%) > DBP (77.9%) > LNR (72.2%) which can be attributed to sorption onto the biosolid, biological degradation, photolysis, and phytoremediation. The pH was negatively correlated to the EDC concentrations while total dissolved solids (TDS), chemical oxygen demand (COD), biochemical oxygen demand (BOD5), and electrical conductivity (EC) were positively correlated. The mass loadings were as high as 373.33 g day-1 of DBP in the treatment plants located in densely populated cities. DEHP and PGT had their Risk Quotients (RQs) > 1, posing a high risk to biota. DMP, DBP, and LNR posed medium risks as their RQ values were between 0.1 and 1. EDCs are therefore loaded to environmental compartments through either the effluent that loads these pollutants into the receiving aquatic ecosystem or through the UDBS, which are used as fertilizers in agricultural farmlands causing potential toxicological risks to aquatic and terrestrial life.

Analysis of drug of abuse compounds using passive sampling and ultrahigh-liquid chromatography coupled to mass spectrometry

The present study proposes the monitoring of compounds of drugs of abuse through the use of passive samplers in water systems. Initially, four positive ion compounds of interest were determined according to national surveys, and then composite sampling and passive sampling were implemented using continuous-flow passive samplers containing two types of sorbents, the Empore disk and Gerstel Twister. Two study sites were established at the beginning and at the end of the middle Bogotá River basin. After 4 days, the sorbents were removed so that they could be desorbed and analyzed using UHPLC-MS in the laboratory. For the composite samples, the results were below the first calibration curve point (FCCP) of the chromatographic method, and for passive sampling, peaks of benzoylecgonine (BE) (21427.3 pg mL-1), methamphetamine (MET) (67101.5 pg mL-1), MDMA (ecstasy) (225844.8 pg mL-1) and 2-ethylidene-1,5-dimethyl-3,3-diphenylpyrrolidine (EDDP) (15908.4 pg mL-1) were found. Therefore, passive sampling could be suggested as an alternative to composite sampling for the monitoring of compounds.

Insights in Pharmaceutical Pollution: The Prospective Role of eDNA Metabarcoding

Environmental pollution is a growing threat to natural ecosystems and one of the world's most pressing concerns. The increasing worldwide use of pharmaceuticals has elevated their status as significant emerging contaminants. Pharmaceuticals enter aquatic environments through multiple pathways related to anthropogenic activity. Their high consumption, insufficient waste treatment, and the incapacity of organisms to completely metabolize them contribute to their accumulation in aquatic environments, posing a threat to all life forms. Various analytical methods have been used to quantify pharmaceuticals. Biotechnology advancements based on next-generation sequencing (NGS) techniques, like eDNA metabarcoding, have enabled the development of new methods for assessing and monitoring the ecotoxicological effects of pharmaceuticals. eDNA metabarcoding is a valuable biomonitoring tool for pharmaceutical pollution because it (a) provides an efficient method to assess and predict pollution status, (b) identifies pollution sources, (c) tracks changes in pharmaceutical pollution levels over time, (d) assesses the ecological impact of pharmaceutical pollution, (e) helps prioritize cleanup and mitigation efforts, and (f) offers insights into the diversity and composition of microbial and other bioindicator communities. This review highlights the issue of aquatic pharmaceutical pollution while emphasizing the importance of using modern NGS-based biomonitoring actions to assess its environmental effects more consistently and effectively.

Application of CRISPR/Cas9-based genome editing in ecotoxicology

Chemicals are widely used and released into the environment, and their degradation, accumulation, migration, and transformation processes in the environment can pose a threat to the ecosystem. The advancement in analytical methods with high-throughput screening of biomolecules has revolutionized the way toxicologists used to explore the effects of chemicals on organisms. CRISPR/Cas is a newly developed tool, widely used in the exploration of basic science and biologically engineered products given its high efficiency and low cost. For example, it can edit target genes efficiently, and save loss of the crop yield caused by environmental pollution as well as gain a better understanding of the toxicity mechanisms from various chemicals. This review briefly introduces the development history of CRISPR/Cas and summarizes the current application of CRISPR/Cas in ecotoxicology, including its application on improving crop yield and drug resistance towards agricultural pollution, antibiotic pollution and other threats. The benefits by applying the CRISPR/Cas9 system in conventional toxicity mechanism studies are fully demonstrated here together with its foreseeable expansions in other area of ecotoxicology. Finally, the prospects and disadvantages of CRISPR/Cas system in the field of ecotoxicology are also discussed.

Exploring the role of microbes for the management of persistent organic pollutants

Persistent organic pollutants (POPs) are chemicals which have been persisting in the environment for many years due to their longer half-lives. POPs have gained attention over the last few decades due to the unsustainable management of chemicals which led to their widespread and massive contamination of biota from different strata and environments. Due to the widespread distribution, bio-accumulation and toxic behavior, POPs have become a risk for organisms and environment. Therefore, a focus is required to eliminate these chemicals from the environment or transform into non-toxic forms. Among the available techniques for the removal of POPs, most of them are inefficient or incur high operational costs. As an alternative to this, microbial bioremediation of POPs such as pesticides, polycyclic aromatic hydrocarbons, polychlorinated biphenyls, pharmaceuticals and personal care products is much more efficient and cost-effective. Additionally, bacteria play a vital role in the biotransformation and solubilization of POPs, which reduces their toxicity. This review specifies the Stockholm Convention that evaluates the risk profile for the management of existing as well as emerging POPs. The sources, types and persistence of POPs along with the comparison of conventional elimination and bioremediation methods of POPs are discussed comprehensively. This study demonstrates the existing bioremediation techniques of POPs and summaries the potential of microbes which serve as enhanced, cost-effective, and eco-friendly approach for POPs elimination.

A review on triclosan in wastewater: Mechanism of action, resistance phenomenon, environmental risks, and sustainable removal techniques

Triclosan, belonging to the bisphenols, is a known antiseptic broad-spectrum biocide. It has a very wide range of applications, both in health care and in the household. Triclosan enters the environment, both water bodies and soil, because of its high prevalence and the ability to accumulation. Excessive use of antimicrobial formulations may cause the generation of resistance among microorganisms. Reduced susceptibility to triclosan is observed more frequently and in an expanded group of microorganisms and is conditioned by a number of different mechanisms occurring on the molecular level. Conventional wastewater treatment processes are not always able to provide a reliable barrier to triclosan. Therefore, additional advanced treatment technologies are being considered in areas, where a triclosan contamination problem has been identified. Removal of triclosan from wastewater is carried out using different biological and chemical techniques; however, it should be pointed out that physico-chemical methods often generate toxic by-products. Toxicity of triclosan and its degradation products, bacterial resistance to this compound, and evident problems with triclosan elimination from wastewater are currently the main problems faced by companies creating products containing triclosan. PRACTITIONER POINTS: Triclosan is an emerging pollutant in the environment because of its ability to accumulation and high prevalence. Reduced susceptibility to triclosan is being observed more frequently. Conventional wastewater treatment processes are not always able to provide a reliable barrier to triclosan. Additional advanced treatment technologies should be implemented to remove triclosan from wastewater.

Emerging environmental health risks associated with the land application of biosolids: a scoping review

BACKGROUND

Over 40% of the six million dry metric tons of sewage sludge, often referred to as biosolids, produced annually in the United States is land applied. Biosolids serve as a sink for emerging pollutants which can be toxic and persist in the environment, yet their fate after land application and their impacts on human health have not been well studied. These gaps in our understanding are exacerbated by the absence of systematic monitoring programs and defined standards for human health protection.

METHODS

The purpose of this paper is to call critical attention to the knowledge gaps that currently exist regarding emerging pollutants in biosolids and to underscore the need for evidence-based testing standards and regulatory frameworks for human health protection when biosolids are land applied. A scoping review methodology was used to identify research conducted within the last decade, current regulatory standards, and government publications regarding emerging pollutants in land applied biosolids.

RESULTS

Current research indicates that persistent organic compounds, or emerging pollutants, found in pharmaceuticals and personal care products, microplastics, and per- and polyfluoroalkyl substances (PFAS) have the potential to contaminate ground and surface water, and the uptake of these substances from soil amended by the land application of biosolids can result in contamination of food sources. Advanced technologies to remove these contaminants from wastewater treatment plant influent, effluent, and biosolids destined for land application along with tools to detect and quantify emerging pollutants are critical for human health protection.

CONCLUSIONS

To address these current risks, there needs to be a significant investment in ongoing research and infrastructure support for advancements in wastewater treatment; expanded manufacture and use of sustainable products; increased public communication of the risks associated with overuse of pharmaceuticals and plastics; and development and implementation of regulations that are protective of health and the environment.

Ketoprofen as an emerging contaminant: occurrence, ecotoxicity and (bio)removal

Ketoprofen, a bicyclic non-steroidal anti-inflammatory drug commonly used in human and veterinary medicine, has recently been cited as an environmental contaminant that raises concerns for ecological well-being. It poses a growing threat due to its racemic mixture, enantiomers, and transformation products, which have ecotoxicological effects on various organisms, including invertebrates, vertebrates, plants, and microorganisms. Furthermore, ketoprofen is bioaccumulated and biomagnified throughout the food chain, threatening the ecosystem function. Surprisingly, despite these concerns, ketoprofen is not currently considered a priority substance. While targeted eco-pharmacovigilance for ketoprofen has been proposed, data on ketoprofen as a pharmaceutical contaminant are limited and incomplete. This review aims to provide a comprehensive summary of the most recent findings (from 2017 to March 2023) regarding the global distribution of ketoprofen in the environment, its ecotoxicity towards aquatic animals and plants, and available removal methods. Special emphasis is placed on understanding how ketoprofen affects microorganisms that play a pivotal role in Earth's ecosystems. The review broadly covers various approaches to ketoprofen biodegradation, including whole-cell fungal and bacterial systems as well as enzyme biocatalysts. Additionally, it explores the potential of adsorption by algae and phytoremediation for removing ketoprofen. This review will be of interest to a wide range of readers, including ecologists, microbiologists, policymakers, and those concerned about pharmaceutical pollution.

Microbial degradation and transformation of PPCPs in aquatic environment: A review

The Pharmaceuticals and Personal Care Products (PPCPs) presence at harmful levels has been identified in aquatic ecosystems all over the world. Currently, PPCPs are more common in aquatic regions and have been discovered to be extremely harmful to aquatic creatures. Waste-water treatment facilities are the primary cause of PPCPs pollution in aquatic systems due to their limited treatment as well as the following the release of PPCPs. The degree of PPCPs elimination is primarily determined by the method applied for the remediation. It must be addressed in an eco-friendly manner in order to significantly improve the environmental quality or, at the very least, to prevent the spread as well as effects of toxic pollutants. However, when compared to other methods, environmentally friendly strategies (biological methods) are less expensive and require less energy. Most biological methods under aerobic conditions have been shown to degrade PPCPs effectively. Furthermore, the scientific literature indicates that with the exception of a few extremely hydrophobic substances, biological degradation by microbes is the primary process for the majority of PPCPs compounds. Hence, this review discusses about the optimistic role of microbe concerned in the degradation or transformation of PPCPs into non/less toxic form in the polluted environment. Accordingly, more number of microbial strains has been implicated in the biodegradation/transformation of harmful PPCPs through a process termed as bioremediation and their limitations.

Effective bioremediation of clarithromycin and diclofenac in wastewater by microbes and Arundo donax L

Bioremediation of pharmaceuticals has gained large research efforts, but there is still a need to improve the performance of bioremediation systems by selecting effective organisms. In this study, we characterized the capability to remove clarithromycin (CLA) and diclofenac (DCF) by the bacterium Streptomyces rochei, and the fungi Phanerochaete chrysosporium and Trametes versicolor. The macrolide antibiotic CLA and the non-steroid anti-inflammatory DCF were selected because these are two of the most frequently detected drugs in water bodies. Growth and content of the PhCs and a DCF metabolite (MET) by the energy crop Arundo donax L. were also evaluated under hydroponic conditions. The removal rate (RR) by S. rochei increased from 24 to 40% at 10 and 100 µg CLA L-1, respectively, averaged over incubation times. At 144 h, the RR by P. chrysosporium was 84%, while by T. versicolor was 70 and 45% at 10 and 100 CLA µg L-1. The RR by S. rochei did not exceed 30% at 1 mg DCF L-1 and reached 60% at 10 mg DCF L-1, whereas approached 95% and 63% by P. chrysosporium and T. versicolor, respectively, at both doses. Root biomass and length of A. donax were strongly affected at 100 µg CLA L-1. CLA concentration in roots and shoots increased with the increase of the dose and translocation factor (TF) was about 1. DCF severely affected both shoot fresh weight and root length at the highest dose and concentration in roots and shoots increased with the increase of the dose. DCF concentrations were 16-19 times higher in roots than in shoots, and TF was about 0.1. MET was detected only in roots and its proportion over the parent compound decreased with the increase of the DCF dose. This study highlights the potential contribution of A. donax and the tested microbial inoculants for improving the effectiveness of bioremediation systems for CLA and DCF removal.

Microbial biochemical pathways of arsenic biotransformation and their application for bioremediation

Arsenic is a ubiquitous toxic metalloid, the concentration of which is beyond WHO safe drinking water standards in many areas of the world, owing to many natural and anthropogenic activities. Long-term exposure to arsenic proves lethal for plants, humans, animals, and even microbial communities in the environment. Various sustainable strategies have been developed to mitigate the harmful effects of arsenic which include several chemical and physical methods, however, bioremediation has proved to be an eco-friendly and inexpensive technique with promising results. Many microbes and plant species are known for arsenic biotransformation and detoxification. Arsenic bioremediation involves different pathways such as uptake, accumulation, reduction, oxidation, methylation, and demethylation. Each of these pathways has a certain set of genes and proteins to carry out the mechanism of arsenic biotransformation. Based on these mechanisms, various studies have been conducted for arsenic detoxification and removal. Genes specific for these pathways have also been cloned in several microorganisms to enhance arsenic bioremediation. This review discusses different biochemical pathways and the associated genes which play important roles in arsenic redox reactions, resistance, methylation/demethylation, and accumulation. Based on these mechanisms, new methods can be developed for effective arsenic bioremediation.

DNA-Binding Protein Dps Protects Escherichia coli Cells against Multiple Stresses during Desiccation

Gradual dehydration is one of the frequent lethal yet poorly understood stresses that bacterial cells constantly face in the environment when their micro ecotopes dry out, as well as in industrial processes. Bacteria successfully survive extreme desiccation through complex rearrangements at the structural, physiological, and molecular levels, in which proteins are involved. The DNA-binding protein Dps has previously been shown to protect bacterial cells from many adverse effects. In our work, using engineered genetic models of E. coli to produce bacterial cells with overproduction of Dps protein, the protective function of Dps protein under multiple desiccation stresses was demonstrated for the first time. It was shown that the titer of viable cells after rehydration in the experimental variants with Dps protein overexpression was 1.5-8.5 times higher. Scanning electron microscopy was used to show a change in cell morphology upon rehydration. It was also proved that immobilization in the extracellular matrix, which is greater when the Dps protein is overexpressed, helps the cells survive. Transmission electron microscopy revealed disruption of the crystal structure of DNA-Dps crystals in E. coli cells that underwent desiccation stress and subsequent watering. Coarse-grained molecular dynamics simulations showed the protective function of Dps in DNA-Dps co-crystals during desiccation. The data obtained are important for improving biotechnological processes in which bacterial cells undergo desiccation.

Human Health Risk Assessment to the Consumption of Medicinal Plants with Melliferous Potential from the Romanian South-Eastern Region

This study presents the impact on human health by consuming medicinal herbs with high melliferous potential (HMPs) from botanical areas with different pollution levels. First, the bioaccumulation of the plants' parts has been determined. The study assessed the potential health risks associated with the ingestion of various mineral species (macroelements-K, Ca, Mg, Na; microelements-Fe, Mn, Cu, Zn, and one trace element Cd) from three types of HMPs (Sambucus nigra (SnL), Hypericum perforatum (Hp), and Tilia tomentosa (Tt)). The average concentrations of these elements were not similar even in the same type of HMPs. Nevertheless, all samples contained detectable levels of the studied elements. The average concentrations of the studied elements were very low (significantly lower than the legal limit set by the WHO). The study's findings indicated that the potential health risks associated with ingesting the elements in HMPs were within acceptable limits for children and adults. The hazard quotient (HQ) for Fe, Mn, Cu, Zn, and Cd and the hazard index (HI) for the minerals from HMPs were significantly lower than the acceptable limit (HQ and HI = 1). Similarly, the carcinogenic risk for chemical substances (Riskccs) were lower than or close to the acceptable limit (1 × 10^-4).

Novel nontarget LC-HRMS-based approaches for evaluation of drinking water treatment

A conventional evaluation methodology for drinking water pollution focuses on analysing hundreds of compounds, usually by liquid chromatography-tandem mass spectrometry. High-resolution mass spectrometry allows comprehensive evaluation of all detected signals (compounds) based on their elemental composition, intensity, and numbers. We combined target analysis of 192 emerging micropollutants with nontarget (NT) full-scan/MS/MS methods to describe the impact of treatment steps in detail and assess drinking water treatment efficiency without compound identification. The removal efficiency based on target analytes ranged from - 143 to 97%, depending on the treatment section, technologies, and season. The same effect calculated for all signals detected in raw water by the NT method ranged between 19 and 65%. Ozonation increased the removal of micropollutants from the raw water but simultaneously caused the formation of new compounds. Moreover, ozonation byproducts showed higher persistence than products formed during other types of treatment. We evaluated chlorinated and brominated organics detected by specific isotopic patterns within the developed workflow. These compounds indicated anthropogenic raw water pollution but also potential treatment byproducts. We could match some of these compounds with libraries available in the software. We can conclude that passive sampling combined with nontargeted analysis shows to be a promising approach for water treatment control, especially for long-term monitoring of changes in technology lines because passive sampling dramatically reduces the number of samples and provides time-weighted average information for 2 to 4 weeks.

Microbe, climate change and marine environment: Linking trends and research hotspots

Microbes, or microorganisms, have been the foundation of the biosphere for over 3 billion years and have played an essential role in shaping our planet. The available knowledge on the topic of microbes associated with climate change has the potential to reshape upcoming research trends globally. As climate change impacts the ocean or marine ecosystem, the responses of these "unseen life" will heavily influence the achievement of a sustainable evolutionary environment. The present study aims to identify microbial-related research under changing climate within the marine environment through the mapping of visualized graphs of the available literature. We used scientometric methods to retrieve documents from the Web of Science platform in the Core Collection (WOSCC) database, analyzing a total of 2767 documents based on scientometric indicators. Our findings show that this research area is growing exponentially, with the most influential keywords being "microbial diversity," "bacteria," and "ocean acidification," and the most cited being "microorganism" and "diversity." The identification of influential clusters in the field of marine science provides insight into the hot spots and frontiers of research in this area. Prominent clusters include "coral microbiome," "hypoxic zone," "novel Thermoplasmatota clade," "marine dinoflagellate bloom," and "human health." Analyzing emerging trends and transformative changes in this field can inform the creation of special issues or research topics in selected journals, thus increasing visibility and engagement among the scientific community.

Bioaccumulation and biomagnifications of toxic metals in tissues of loggerhead turtles (Caretta caretta) from the Mediterranean Sea coast, Egypt

Heavy metal concentrations in the different tissues of marine turtles are presented; the most frequently monitored elements are mercury, cadmium, and lead. Concentrations of Hg, Cd, Pb, and As in different organs and tissues (liver, kidney, muscle tissue, fat tissue, and blood) of loggerhead turtle Caretta caretta from the southeastern Mediterranean Sea were determined using Atomic Absorption Spectrophotometer, Shimadzu and mercury vapor unite (MVu 1A) for Hg measurements. The highest levels of cadmium and arsenic were found in the kidney (Cd: 61.17 µg g^-1; As: 0.051 µg g^-1 dry weight). For lead, the highest level was found in muscle tissue (35.80 µg g^-1). Mercury tended to be higher in the liver than in other tissues and organs (0.253 µg g^-1 dry weight) which showed a higher accumulation of this element. Fat tissue generally displays the lowest trace element burdens. The concentrations of As remained low in all the considered tissues, possibly the result of low trophic levels in sea turtles. In contrast, the diet of loggerhead turtles would result in significant exposure to Pb. This is the first study into metal accumulation in the tissues of a loggerhead turtle from the Egyptian Mediterranean coastline.

First emerging pollutants profile in groundwater of the volcanic active island of El Hierro (Canary Islands)

Emerging pollutants (EPs) are substances present in wastewater that have not been studied, previously, leading to ambiguity in regulations for their presence in water resources. Territories that are highly dependent on groundwater resources are at a high risk of suffering the consequences of EP contamination due to their dependence on good quality groundwater for agriculture, drinking, and other uses. A relevant example is El Hierro (Canary Islands), which was declared a biosphere reserve by the UNESCO in 2000 and is almost completely powered by renewable energies. Using high performance liquid chromatography-mass spectrometry, the concentrations of 70 EPs were assessed at 19 sampling points on El Hierro. The results indicated that no pesticides were present in groundwater; however, varied concentration levels of ultraviolet (UV) filters, UV stabilizers/blockers and pharmaceutically active compounds (PhACs) were found, with La Frontera being the most contaminated municipality. With regard to the different installation types, piezometers and wells were the ones showing the highest concentrations for most EPs. Interestingly, the depth of sampling correlated positively with EP concentration, and four different clusters virtually dividing the island into two areas could be identified based on the presence of each EP. More studies should be performed to ascertain why a few of the EPs showed considerably high concentrations at different depths. The results obtained highlight the need to, not only implement remediation measures once EPs have reached the soil and aquifers, but also to avoid their incorporation into the water cycle via homes, animal husbandry, agriculture, industry, and wastewater treatment plants (WWTPs).

Antidepressant pharmaceuticals in aquatic systems, individual-level ecotoxicological effects: growth, survival and behavior

The growing consumption of antidepressant pharmaceuticals has resulted in their widespread occurrence in the environment, particularly in waterways with a typical concentration range from ng L^-1 to μg L^-1. An increasing number of studies have confirmed the ecotoxic potency of antidepressants, not only at high concentrations but also at environmentally relevant levels. The present review covers literature from the last decade on the individual-level ecotoxicological effects of the most commonly used antidepressants, including their impact on behavior, growth, and survival. We focus on the relationship between antidepressants physico-chemical properties and dynamics in the environment. Furthermore, we discuss the advantages of considering behavioral changes as sensitive endpoints in ecotoxicology, as well as some current methodological shortcomings in the field, including low standardization, reproducibility and context-dependency.