Improved multi-shot diffusion imaging using GRAPPA with a compact kernel

Reduced physiology-induced temporal instability achieved with variable-flip-angle fast low-angle excitation echo-planar technique with multishot echo planar time-resolved imaging

PURPOSE

Echo planar time-resolved imaging (EPTI) is a new imaging approach that addresses the limitations of EPI by providing high-resolution, distortion- and T2/T 2 * $$ {\mathrm{T}}_2^{\ast } $$  blurring-free imaging for functional MRI (fMRI). However, as in all multishot sequences, intershot phase variations induced by physiological processes can introduce temporal instabilities to the reconstructed time-series data. This study aims to reduce these instabilities in multishot EPTI.

THEORY AND METHODS

In conventional multishot EPTI, the time intervals between the shots comprising each slice can introduce intershot phase variations. Here, the fast low-angle excitation echo-planar technique (FLEET), in which all shots of each slice are acquired consecutively with minimal time delays, was combined with a variable flip angle (VFA) technique to improve intershot consistency and maximize signal. A recursive Shinnar-Le Roux RF pulse design algorithm was used to generate pulses for different shots to produce consistent slice profiles and signal intensities across shots. Blipped controlled aliasing in parallel imaging simultaneous multislice was also combined with the proposed VFA-FLEET EPTI to improve temporal resolution and increase spatial coverage.

RESULTS

The temporal stability of VFA-FLEET EPTI was compared with conventional EPTI at 7 T. The results demonstrated that VFA-FLEET can provide spatial-specific increase of temporal stability. We performed high-resolution task-fMRI experiments at 7 T using VFA-FLEET EPTI, and reliable BOLD responses to a visual stimulus were detected.

CONCLUSION

The intershot phase variations induced by physiological processes in multishot EPTI can manifest as specific spatial patterns of physiological noise enhancement and lead to reduced temporal stability. The VFA-FLEET technique can substantially reduce these physiology-induced instabilities in multishot EPTI acquisitions. The proposed method provides sufficient stability and sensitivity for high-resolution fMRI studies.

A Paired Phase and Magnitude Reconstruction for Advanced Diffusion-Weighted Imaging

OBJECTIVE

Multi-shot interleaved echo planer imaging (Ms-iEPI) can obtain diffusion-weighted images (DWI) with high spatial resolution and low distortion, but suffers from ghost artifacts introduced by phase variations between shots. In this work, we aim at solving the ms-iEPI DWI reconstructions under inter-shot motions and ultra-high b-values.

METHODS

An iteratively joint estimation model with paired phase and magnitude priors is proposed to regularize the reconstruction (PAIR). The former prior is low-rankness in the k-space domain. The latter explores similar edges among multi-b-value and multi-direction DWI with weighted total variation in the image domain. The weighted total variation transfers edge information from the high SNR images (b-value = 0) to DWI reconstructions, achieving simultaneously noise suppression and image edges preservation.

RESULTS

Results on simulated and in vivo data show that PAIR can remove inter-shot motion artifacts very well (8 shots) and suppress the noise under the ultra-high b-value (4000 s/mm2) significantly.

CONCLUSION

The joint estimation model PAIR with complementary priors has a good performance on challenging reconstructions under inter-shot motions and a low signal-to-noise ratio.

SIGNIFICANCE

PAIR has potential in advanced clinical DWI applications and microstructure research.

High-fidelity, high-spatial-resolution diffusion magnetic resonance imaging of ex vivo whole human brain at ultra-high gradient strength with structured low-rank echo-planar imaging ghost correction

Diffusion magnetic resonance imaging (dMRI) of whole ex vivo human brain specimens enables three-dimensional (3D) mapping of structural connectivity at the mesoscopic scale, providing detailed evaluation of fiber architecture and tissue microstructure at a spatial resolution that is difficult to access in vivo. To account for the short T2 and low diffusivity of fixed tissue, ex vivo dMRI is often acquired using strong diffusion-sensitizing gradients and multishot/segmented 3D echo-planar imaging (EPI) sequences to achieve high spatial resolution. However, the combination of strong diffusion-sensitizing gradients and multishot/segmented EPI readout can result in pronounced ghosting artifacts incurred by nonlinear spatiotemporal variations in the magnetic field produced by eddy currents. Such ghosting artifacts cannot be corrected with conventional correction solutions and pose a significant roadblock to leveraging human MRI scanners with ultrahigh gradients for ex vivo whole-brain dMRI. Here, we show that ghosting-correction approaches that correct for either polarity-related ghosting or shot-to-shot variations in a separate manner are suboptimal for 3D multishot diffusion-weighted EPI experiments in fixed human brain specimens using strong diffusion-sensitizing gradients on the 3-T Connectom MRI scanner, resulting in orientationally biased dMRI estimates. We apply a recently developed advanced k-space reconstruction method based on structured low-rank matrix (SLM) modeling that handles both polarity-related ghosting and shot-to-shot variation simultaneously, to mitigate artifacts in high-angular resolution multishot dMRI data acquired in several fixed human brain specimens at 0.7-0.8-mm isotropic spatial resolution using b-values up to 10,000 s/mm2 and gradient strengths up to 280 mT/m. We demonstrate the improved mapping of diffusion tensor imaging and fiber orientation distribution functions in key neuroanatomical areas distributed across the whole brain using SLM-based EPI ghost correction compared with alternative techniques.

Multi-band multi-shot diffusion MRI reconstruction with joint usage of structured low-rank constraints and explicit phase mapping

PURPOSE

To develop a joint reconstruction method for multi-band multi-shot diffusion MRI.

THEORY AND METHODS

Multi-band multi-shot EPI acquisition is an effective approach for high-resolution diffusion MRI, but requires specific algorithms to correct the inter-shot phase variations. The phase correction can be done by first estimating the explicit phase map and then feeding it into the k-space signal formulation model. Alternatively, the phase information can be used indirectly as structured low-rank constraints in k-space. The 2 methods differ in reconstruction accuracy and efficiency. We aim to combine the 2 different approaches for improved image quality and reconstruction efficiency simultaneously, termed "joint usage of structured low-rank constraints and explicit phase mapping" (JULEP). The proposed JULEP reconstruction is tested on both single-band and multi-band, multi-shot diffusion data, with different resolutions and b values. The results of JULEP are compared with conventional methods with explicit phase mapping (i.e., multiplexed sensitivity-encoding [MUSE]) and structured low-rank constraints (i.e., MUSSELS), and another joint reconstruction method (i.e., network estimated artifacts for tempered reconstruction [NEATR]).

RESULTS

JULEP improves the quality of the navigator and subsequently facilitates the reconstruction of final diffusion images. Compared with all 3 other methods (MUSE, MUSSELS, and NEATR), JULEP mitigates residual structural bias and improves temporal SNRs in the final diffusion image, particularly at high multi-band factors. Compared with MUSSELS, JULEP also improves computational efficiency.

CONCLUSION

The proposed JULEP method significantly improves the image quality and reconstruction efficiency of multi-band multi-shot diffusion MRI, which can promote a broader application of high-resolution diffusion MRI.

Distortion-Free Diffusion Imaging Using Self-Navigated Cartesian Echo-Planar Time Resolved Acquisition and Joint Magnitude and Phase Constrained Reconstruction

Echo-planar time resolved imaging (EPTI) is an effective approach for acquiring high-quality distortion-free images with a multi-shot EPI (ms-EPI) readout. As with traditional ms-EPI acquisitions, inter-shot phase variations present a main challenge when incorporating EPTI into a diffusion-prepared pulse sequence. The aim of this study is to develop a self-navigated Cartesian EPTI-based (scEPTI) acquisition together with a magnitude and phase constrained reconstruction for distortion-free diffusion imaging. A self-navigated Cartesian EPTI-based diffusion-prepared pulse sequence is designed. The different phase components in EPTI diffusion signal are analyzed and an approach to synthesize a fully phase-matched navigator for the inter-shot phase correction is demonstrated. Lastly, EPTI contains richer magnitude and phase information than conventional ms-EPI, such as the magnitude and phase correlations along the temporal dimension. The potential of these magnitude and phase correlations to enhance the reconstruction is explored. The reconstruction results with and without phase matching and with and without phase or magnitude constraints are compared. Compared with reconstruction without phase matching, the proposed phase matching method can improve the accuracy of inter-shot phase correction and reduce signal corruption in the final diffusion images. Magnitude constraints further improve image quality by suppressing the background noise and thereby increasing SNR, while phase constraints can mitigate possible image blurring from adding magnitude constraints. The high-quality distortion-free diffusion images and simultaneous diffusion-relaxometry imaging capacity provided by the proposed EPTI design represent a highly valuable tool for both clinical and neuroscientific assessments of tissue microstructure.

White matter regeneration induced by aligned fibrin nanofiber hydrogel contributes to motor functional recovery in canine T12 spinal cord injury

A hierarchically aligned fibrin hydrogel (AFG) that possesses soft stiffness and aligned nanofiber structure has been successfully proven to facilitate neuroregeneration in vitro and in vivo. However, its potential in promoting nerve regeneration in large animal models that is critical for clinical translation has not been sufficiently specified. Here, the effects of AFG on directing neuroregeneration in canine hemisected T12 spinal cord injuries were explored. Histologically obvious white matter regeneration consisting of a large area of consecutive, compact and aligned nerve fibers is induced by AFG, leading to a significant motor functional restoration. The canines with AFG implantation start to stand well with their defective legs from 3 to 4 weeks postoperatively and even effortlessly climb the steps from 7 to 8 weeks. Moreover, high-resolution multi-shot diffusion tensor imaging illustrates the spatiotemporal dynamics of nerve regeneration rapidly crossing the lesion within 4 weeks in the AFG group. Our findings indicate that AFG could be a potential therapeutic vehicle for spinal cord injury by inducing rapid white matter regeneration and restoring locomotion, pointing out its promising prospect in clinic practice.

Multi-contrast multi-shot EPI for accelerated diffusion MRI

The clinical application of diffusion MRI is practically hindered by its long scan time. In this work, we introduce a novel imaging and parameter estimation framework for time-efficient diffusion MRI. To improve the scan efficiency, we propose ADEPT (Accelerated Diffusion EPI with multi-contrast shoTs), in which diffusion contrast settings are allowed to change between shots in a multi-shot EPI acquisition (i.e. intra-scan modulation). The framework simultaneously corrects for artifacts related to shot-to-shot phase inconsistencies in multi-shot imaging by iteratively estimating the phase map parameters along with the diffusion model parameters directly from the acquired intra-scan modulated k-space data. Monte Carlo simulation experiments show the effective estimation of diffusion tensor parameters in multi-shot EPI diffusion imaging.

Slab boundary artifact correction in multislab imaging using convolutional-neural-network-enabled inversion for slab profile encoding

PURPOSE

This study aims to propose a novel algorithm for slab boundary artifact correction in both single-band multislab imaging and simultaneous multislab (SMSlab) imaging.

THEORY AND METHODS

In image domain, the formation of slab boundary artifacts can be regarded as modulating the artifact-free images using the slab profiles and introducing aliasing along the slice direction. Slab boundary artifact correction is the inverse problem of this process. An iterative algorithm based on convolutional neural networks (CNNs) is proposed to solve the problem, termed CNN-enabled inversion for slab profile encoding (CPEN). Diffusion-weighted SMSlab images and reference images without slab boundary artifacts were acquired in 7 healthy subjects for training. Images of 5 healthy subjects were acquired for testing, including single-band multislab and SMSlab images with 1.3-mm or 1-mm isotropic resolution. CNN-enabled inversion for slab profile encoding was compared with a previously reported method (i.e., nonlinear inversion for slab profile encoding [NPEN]).

RESULTS

CNN-enabled inversion for slab profile encoding reduces the slab boundary artifacts in both single-band multislab and SMSlab images. It also suppresses the slab boundary artifacts in the diffusion metric maps. Compared with NPEN, CPEN shows fewer residual artifacts in different acquisition protocols and more significant improvements in quantitative assessment, and it also accelerates the computation by more than 35 times.

CONCLUSION

CNN-enabled inversion for slab profile encoding can reduce the slab boundary artifacts in multislab acquisitions. It shows better slab boundary artifact correction capacity, higher robustness, and computation efficiency when compared with NPEN. It has the potential to improve the accuracy of multislab acquisitions in high-resolution DWI and functional MRI.

High-fidelity diffusion tensor imaging of the cervical spinal cord using point-spread-function encoded EPI

Diffusion tensor imaging (DTI) of the spinal cord is technically challenging due to the size of its structure and susceptibility-induced field inhomogeneity, which impedes clinical applications. This study aimed to achieve high-fidelity spinal cord DTI with reasonable SNR and practical acquisition efficiency. Particularly, a distortion-free multi-shot EPI technique, namely point-spread-function encoded EPI (PSF-EPI), was adopted for diffusion imaging of the cervical spinal cord (CSC). The shot number can be reduced to six for sagittal scans through titled-CAIPI acceleration and partial Fourier undersampling, consequently rendering this technique beneficial in clinics. Fifteen healthy volunteers and seven patients with metallic implants underwent sagittal scans using tilted-CAIPI PSF-EPI at 3T. Unsuppressed fat signals were further removed by retrospective water/fat separation using the intrinsic chemical-shift encoded signals. Compared with multi-shot interleaved EPI method, highly accelerated PSF-EPI method provided evidently improved distortion reduction and higher consistency with anatomical references even with metallic implants. Additionally, axial DTI scans using PSF-EPI were also evaluated quantitatively, and the measured DTI metrics are similar to those obtained from the zonal oblique multi-slice EPI (ZOOM-EPI) method and reported values. The high anatomical consistency, practical scan time and quantitative reliability indicate PSF-EPI's clinical potential for CSC diffusion imaging.

Improving distortion correction for isotropic high-resolution 3D diffusion MRI by optimizing Jacobian modulation

PURPOSE

To improve distortion correction for isotropic high-resolution whole-brain 3D diffusion MRI when in a time-saving acquisition scenario.

THEORY AND METHODS

Data were acquired using simultaneous multi-slab (SMSlab) acquisitions, with a b = 0 image pair encoded by reversed polarity gradients (RPG) for phase encoding (PE) and diffusion weighted images encoded by a single PE direction. Eddy current-induced distortions were corrected first. During the following susceptibility distortion correction, image deformation was first corrected by the field map estimated from the b = 0 image pair. Intensity variation was subsequently corrected by Jacobian modulation. Two Jacobian modulation methods were compared. They calculated the Jacobian modulation map from the field map, or from the deformation corrected b = 0 image pair, termed as J_Field and J_RPG , respectively. A modified version of the J_RPG method, with proper smoothing, was further proposed for improved correction performance, termed as J_RPG-smooth .

RESULTS

Compared to J_Field modulation, less remaining distortions are observed when using the J_RPG and J_RPG-smooth methods, especially in areas with large B0 field inhomogeneity. The original J_RPG method causes signal-to-noise ratio (SNR) deficiency problem, which manifests as degraded SNR of the diffusion weighted images, while the J_RPG-smooth method maintains the original image SNR. Less estimation errors of diffusion metrics are observed when using the J_RPG-smooth method.

CONCLUSION

This study improves the distortion correction for isotropic high-resolution whole-brain 3D diffusion MRI by optimizing Jacobian modulation. The optimized method outperforms the conventional J_Field method regarding intensity variation correction and accuracy of diffusion metrics estimation, and outperforms the original J_RPG method regarding SNR performance.

High-resolution whole-brain diffusion MRI at 3T using simultaneous multi-slab (SMSlab) acquisition

High-resolution diffusion MRI (dMRI) is a crucial tool in neuroscience studies to detect fine fiber structure, depict complex fiber architecture and analyze cortical anisotropy. However, high-resolution dMRI is limited by its intrinsically low SNR due to diffusion attenuation. A series of techniques have been proposed to improve the SNR performance, but most of them are at the cost of long scan time, which in turn sacrifice the SNR efficiency, especially for large FOV imaging, such as whole-brain imaging. Recently, a combination of 3D multi-slab acquisition and simultaneous multi-slice (SMS) excitation, namely simultaneous multi-slab (SMSlab), has been demonstrated to have potential for high-resolution diffusion imaging with high SNR and SNR efficiency. In our previous work, we have proposed a 3D Fourier encoding and reconstruction framework for SMSlab acquisition. In this study, we extend this 3D k-space framework to diffusion imaging, by developing a novel navigator acquisition strategy and exploring a k-space-based phase correction method. In vivo brain data are acquired using the proposed SMSlab method and compared with a series of different acquisitions, including the traditional 3D multi-slab, 2D SMS and 2D single-shot EPI (ss-EPI) acquisitions. The results demonstrate that SMSlab has a better SNR performance compared with 3D multi-slab and 2D SMS. The detection capacity of fine fiber structures is improved using SMSlab, compared with the low-resolution diffusion imaging using conventional 2D ss-EPI.

Segmented diffusion imaging with iterative motion-corrected reconstruction (SEDIMENT) for brain echo-planar imaging

Multi-shot techniques offer improved resolution and signal-to-noise ratio for diffusion- weighted imaging, but make the acquisition vulnerable to shot-specific phase variations and inter-shot macroscopic motion. Several model-based reconstruction approaches with iterative phase correction have been proposed, but robust macroscopic motion estimation is still challenging. Segmented diffusion imaging with iterative motion-corrected reconstruction (SEDIMENT) uses iteratively refined data-driven shot navigators based on sensitivity encoding to cure phase and rigid in-plane motion artifacts. The iterative scheme is compared in simulations and in vivo with a non-iterative reference algorithm for echo-planar imaging with up to sixfold segmentation. The SEDIMENT framework supports partial Fourier acquisitions and furthermore includes options for data rejection and learning-based modules to improve robustness and convergence.

Multi-shot echo-planar diffusion tensor imaging in cervical spondylotic myelopathy

AIMS

The aim of this study was to use diffusion tensor imaging (DTI) to investigate changes in diffusion metrics in patients with cervical spondylotic myelopathy (CSM) up to five years after decompressive surgery. We correlated these changes with clinical outcomes as scored by the Modified Japanese Orthopedic Association (mJOA) method, Neck Disability Index (NDI), and Visual Analogue Scale (VAS).

METHODS

We used multi-shot, high-resolution, diffusion tensor imaging (ms-DTI) in patients with cervical spondylotic myelopathy (CSM) to investigate the change in diffusion metrics and clinical outcomes up to five years after anterior cervical interbody discectomy and fusion (ACDF). High signal intensity was identified on T2-weighted imaging, along with DTI metrics such as fractional anisotropy (FA). MJOA, NDI, and VAS scores were also collected and compared at each follow-up point. Spearman correlations identified correspondence between FA and clinical outcome scores.

RESULTS

Significant differences in mJOA scores and FA values were found between preoperative and postoperative timepoints up to two years after surgery. FA at the level of maximum cord compression (MCL) preoperatively was significantly correlated with the preoperative mJOA score. FA postoperatively was also significantly correlated with the postoperative mJOA score. There was no statistical relationship between NDI and mJOA or VAS.

CONCLUSION

ms-DTI can detect microstructural changes in affected cord segments and reflect functional improvement. Both FA values and mJOA scores showed maximum recovery two years after surgery. The DTI metrics are significantly associated with pre- and postoperative mJOA scores. DTI metrics are a more sensitive, timely, and quantifiable surrogate for evaluating patients with CSM and a potential quantifiable biomarker for spinal cord dysfunction. Cite this article: Bone Joint J 2020;102-B(9):1210-1218.

Phase-constrained reconstruction of high-resolution multi-shot diffusion weighted image

Diffusion weighted imaging (DWI) is a unique examining method in tumor diagnosis, acute stroke evaluation. Single-shot echo planar imaging is currently conventional method for DWI. However, single-shot DWI suffers from image distortion, blurring and low spatial resolution. Although multi-shot DWI improves image resolution, it brings phase variations among different shots at the same time. In this paper, we introduce a smooth phase constraint of each shot image into multi-shot navigator-free DWI reconstruction by imposing the low-rankness of Hankel matrix constructed from the k-space data. Furthermore, we exploit the partial sum minimization of singular values to constrain the low-rankness of Hankel matrix. Results on brain imaging data show that the proposed method outperforms the state-of-the-art methods in terms of artifacts removal and our method potentially has the ability to reconstruct high number of shot of DWI.

Application of multishot diffusion tensor imaging in spinal cord tumors

Objective:

To explore the usefulness of multishot diffusion tensor imaging (DTI) for evaluating the neurological function of patients with spinal cord tumors

Methods:

Routine magnetic resonance imaging and multishot DTI were performed in five patients with spinal cord tumors. The values of fractional anisotropy (FA) and radial diffusivity (RD) were analyzed.

Results:

Multishot DTI of spinal cord tumors allowed for defining the margins of tumors and determining the relationship of tumors with the adjacent white matter structures of the spinal cord. Multishot DTI demonstrated significantly increased RD and decreased FA of spinal cord tumors compared with those of the normal spinal cord.

Conclusions:

Multishot DTI is a potentially useful modality for differentiating resectable tumors from nonresectable ones based on preoperative imaging alone as well as for differentiating intramedullary tumors from extramedullary ones. Further prospective studies are warranted to confirm these results.

Qualitative and quantitative comparison of image quality between single-shot echo-planar and interleaved multi-shot echo-planar diffusion-weighted imaging in female pelvis

OBJECTIVES

To qualitatively and quantitatively compare the image quality between single-shot echo-planar (SS-EPI) and multi-shot echo-planar (IMS-EPI) diffusion-weighted imaging (DWI) in female pelvis METHODS: This was a prospective study involving 80 females who underwent 3.0T pelvic magnetic resonance imaging (MRI). SS-EPI and IMS-EPI DWI were acquired with 3 b values (0, 400, 800 s/mm²). Two independent reviewers assessed the overall image quality, artifacts, sharpness, and lesion conspicuity based on a 5-point Likert scale. Regions of interest (ROI) were placed on the endometrium and the gluteus muscles to quantify the signal intensities and apparent diffusion coefficient (ADC). Signal-to-noise ratio (SNR), contrast-to-noise ratio (CNR), and geometric distortion were quantified on both sequences. Inter-rater agreement was assessed using κ statistics and Kendall test. Qualitative scores were compared using Wilcoxon signed-rank test and quantitative parameters were compared with paired t test and Bland-Altman analysis.

RESULTS

IMS-EPI demonstrated better image quality than SS-EPI for all aspects evaluated (SS-EPI vs. IMS-EPI: overall quality 3.04 vs. 4.17, artifacts 3.09 vs. 3.99, sharpness 2.40 vs. 4.32, lesion conspicuity 3.20 vs. 4.25; p < 0.001). Good agreement and correlation were observed between two reviewers (SS-EPI κ 0.699, r 0.742; IMS-EPI κ 0.702, r 0.789). IMS-EPI showed lower geometric distortion, SNR, and CNR than SS-EPI (p < 0.050). There was no significant difference in the mean ADC between the two sequences.

CONCLUSION

IMS-EPI showed better image quality with lower geometric distortion without affecting the quantification of ADC, though the SNR and CNR decreased due to post-processing limitations.

KEY POINTS

• IMS-EPI showed better image quality than SS-EPI. • IMS-EPI showed lower geometric distortion without affecting ADC compared with SS-EPI. • The SNR and CNR of IMS-EPI decreased due to post-processing limitations.

Highly accelerated multishot echo planar imaging through synergistic machine learning and joint reconstruction

PURPOSE

To introduce a combined machine learning (ML)- and physics-based image reconstruction framework that enables navigator-free, highly accelerated multishot echo planar imaging (msEPI) and demonstrate its application in high-resolution structural and diffusion imaging.

METHODS

Single-shot EPI is an efficient encoding technique, but does not lend itself well to high-resolution imaging because of severe distortion artifacts and blurring. Although msEPI can mitigate these artifacts, high-quality msEPI has been elusive because of phase mismatch arising from shot-to-shot variations which preclude the combination of the multiple-shot data into a single image. We utilize deep learning to obtain an interim image with minimal artifacts, which permits estimation of image phase variations attributed to shot-to-shot changes. These variations are then included in a joint virtual coil sensitivity encoding (JVC-SENSE) reconstruction to utilize data from all shots and improve upon the ML solution.

RESULTS

Our combined ML + physics approach enabled Rinplane × multiband (MB) = 8- × 2-fold acceleration using 2 EPI shots for multiecho imaging, so that whole-brain T2 and T2 * parameter maps could be derived from an 8.3-second acquisition at 1 × 1 × 3-mm3 resolution. This has also allowed high-resolution diffusion imaging with high geometrical fidelity using 5 shots at Rinplane × MB = 9- × 2-fold acceleration. To make these possible, we extended the state-of-the-art MUSSELS reconstruction technique to simultaneous multislice encoding and used it as an input to our ML network.

CONCLUSION

Combination of ML and JVC-SENSE enabled navigator-free msEPI at higher accelerations than previously possible while using fewer shots, with reduced vulnerability to poor generalizability and poor acceptance of end-to-end ML approaches.

Distortion correction for high-resolution single-shot EPI DTI using a modified field-mapping method

PURPOSE

The widely used single-shot EPI (SS-EPI) diffusion tensor imaging (DTI) suffers from strong image distortion due to B₀ inhomogeneity, especially for high-resolution imaging. Traditional methods such as the field-mapping method and the top-up method have various deficiencies in high-resolution SS-EPI DTI distortion correction. This study aims to propose a robust distortion correction approach, which combines the advantages of traditional methods and overcomes their deficiencies, for high-resolution SS-EPI DTI.

METHODS

The proposed correction method is based on the echo planar spectroscopic imaging field-mapping followed by an intensity correction procedure. To evaluate the efficacy of distortion correction, the proposed method was compared with the conventional field-mapping method and the top-up method, using a newly developed quantitative evaluation framework. The correction results were also compared with multi-shot EPI DTI to investigate whether the proposed method can provide high-resolution SS-EPI DTI with high geometric fidelity and high time efficiency.

RESULTS

The results show that accurate field-mapping and intensity correction are critical to distortion correction in high-resolution SS-EPI DTI. The proposed method can provide more precise field maps and better correction results than the other two methods (p < 0.0001), and the corrected images show higher geometric fidelity than those from MS-EPI DTI.

CONCLUSION

An effective method is proposed to reduce image distortion in high-resolution SS-EPI DTI. It is practical to achieve high-resolution DTI with high time efficiency and high structure accuracy using this method.

A 3D k-space Fourier encoding and reconstruction framework for simultaneous multi-slab acquisition

PURPOSE

To propose a novel 3D k-space Fourier encoding and reconstruction framework for simultaneous multi-slab (SMSlab) acquisition and demonstrate its efficacy in high-resolution imaging.

METHODS

First, it is illustrated in theory how the inter-slab gap interferes with the formation of the SMSlab 3D k-space. Then, joint RF and gradient encoding are applied to remove the inter-slab gap interference and form a SMSlab 3D k-space. In vivo experiments are performed to validate the proposed theory. Acceleration in the proposed SMSlab 3D k-space is also evaluated.

RESULTS

High-resolution (1.0 mm isotropic) images can be reconstructed using the proposed SMSlab 3D framework. Controlled aliasing in parallel imaging sampling and 2D GRAPPA reconstruction can also be applied in the SMSlab 3D k-space. Compared with conventional multi-slab acquisition, SMSlab exhibits better SNR maintainability (such as lower g-factors), especially at high acceleration factors.

CONCLUSION

It is demonstrated that the joint application of RF and gradient encoding enables SMSlab within a 3D Fourier encoding framework. Images with high isotropic resolution can be reconstructed, and further acceleration is also applicable. The proposed SMSlab 3D k-space can be valuable for both high-resolution and high-efficiency diffusion and functional MRI.

Tilted-CAIPI for highly accelerated distortion-free EPI with point spread function (PSF) encoding

PURPOSE

To develop a method for fast distortion- and blurring-free imaging.

THEORY

EPI with point-spread-function (PSF) mapping can achieve distortion- and blurring-free imaging at a cost of long acquisition time. In this study, an acquisition/reconstruction technique, termed "tilted-CAIPI," is proposed to achieve >20× acceleration for PSF-EPI. The proposed method systematically optimized the k-space sampling trajectory with B₀ -inhomogeneity-informed reconstruction, to exploit the inherent signal correlation in PSF-EPI and take full advantage of coil sensitivity. Susceptibility-induced phase accumulation is regarded as an additional encoding that is estimated by calibration data and integrated into reconstruction. Self-navigated phase correction was developed to correct shot-to-shot phase variation in diffusion imaging.

METHODS

Tilted-CAIPI was implemented at 3T, with incorporation of partial Fourier and simultaneous multislice to achieve further accelerations. T₂ -weighted, T₂ ^* -weighted, and diffusion-weighted imaging experiments were conducted to evaluate the proposed method.

RESULTS

The ability of tilted-CAIPI to provide highly accelerated imaging without distortion and blurring was demonstrated through in vivo brain experiments, where only 8 shots per simultaneous slice group were required to provide high-quality, high-SNR imaging at 0.8-1 mm resolution.

CONCLUSION

Tilted-CAIPI achieved fast distortion- and blurring-free imaging with high SNR. Whole-brain T₂ -weighted, T₂ ^* -weighted, and diffusion imaging can be obtained in just 15-60 s.

Improving parallel imaging by jointly reconstructing multi-contrast data

PURPOSE

To develop parallel imaging techniques that simultaneously exploit coil sensitivity encoding, image phase prior information, similarities across multiple images, and complementary k-space sampling for highly accelerated data acquisition.

METHODS

We introduce joint virtual coil (JVC)-generalized autocalibrating partially parallel acquisitions (GRAPPA) to jointly reconstruct data acquired with different contrast preparations, and show its application in 2D, 3D, and simultaneous multi-slice (SMS) acquisitions. We extend the joint parallel imaging concept to exploit limited support and smooth phase constraints through Joint (J-) LORAKS formulation. J-LORAKS allows joint parallel imaging from limited autocalibration signal region, as well as permitting partial Fourier sampling and calibrationless reconstruction.

RESULTS

We demonstrate highly accelerated 2D balanced steady-state free precession with phase cycling, SMS multi-echo spin echo, 3D multi-echo magnetization-prepared rapid gradient echo, and multi-echo gradient recalled echo acquisitions in vivo. Compared to conventional GRAPPA, proposed joint acquisition/reconstruction techniques provide more than 2-fold reduction in reconstruction error.

CONCLUSION

JVC-GRAPPA takes advantage of additional spatial encoding from phase information and image similarity, and employs different sampling patterns across acquisitions. J-LORAKS achieves a more parsimonious low-rank representation of local k-space by considering multiple images as additional coils. Both approaches provide dramatic improvement in artifact and noise mitigation over conventional single-contrast parallel imaging reconstruction. Magn Reson Med 80:619-632, 2018. © 2018 International Society for Magnetic Resonance in Medicine.

A diffusion-matched principal component analysis (DM-PCA) based two-channel denoising procedure for high-resolution diffusion-weighted MRI

Over the past several years, significant efforts have been made to improve the spatial resolution of diffusion-weighted imaging (DWI), aiming at better detecting subtle lesions and more reliably resolving white-matter fiber tracts. A major concern with high-resolution DWI is the limited signal-to-noise ratio (SNR), which may significantly offset the advantages of high spatial resolution. Although the SNR of DWI data can be improved by denoising in post-processing, existing denoising procedures may potentially reduce the anatomic resolvability of high-resolution imaging data. Additionally, non-Gaussian noise induced signal bias in low-SNR DWI data may not always be corrected with existing denoising approaches. Here we report an improved denoising procedure, termed diffusion-matched principal component analysis (DM-PCA), which comprises 1) identifying a group of (not necessarily neighboring) voxels that demonstrate very similar magnitude signal variation patterns along the diffusion dimension, 2) correcting low-frequency phase variations in complex-valued DWI data, 3) performing PCA along the diffusion dimension for real- and imaginary-components (in two separate channels) of phase-corrected DWI voxels with matched diffusion properties, 4) suppressing the noisy PCA components in real- and imaginary-components, separately, of phase-corrected DWI data, and 5) combining real- and imaginary-components of denoised DWI data. Our data show that the new two-channel (i.e., for real- and imaginary-components) DM-PCA denoising procedure performs reliably without noticeably compromising anatomic resolvability. Non-Gaussian noise induced signal bias could also be reduced with the new denoising method. The DM-PCA based denoising procedure should prove highly valuable for high-resolution DWI studies in research and clinical uses.

eIRIS: Eigen-analysis approach for improved spine multi-shot diffusion MRI

Image reconstruction using image-space sampling function (IRIS) corrects motion-induced inter-shot phase variations using phase maps from navigator-echo for multi-shot diffusion MRI. However, the bandwidth along the phase-encoding direction of navigator-echo is usually lower than that of image-echo, and thus their geometric distortions may be different. This geometric mismatch is corrected in IRIS by using the B₀ map from an additional scan. In this paper, we present an enhanced IRIS (eIRIS) method that remove the requirement of B₀ map. eIRIS treats shots as virtual coils, and then uses an eigen-analysis-based approach, which is insensitive to geometric mismatch, to estimates coil sensitivity maps containing the inter-shot phase variations. The final image is reconstructed under the framework of SENSE. Simulation, phantom, and cervical spine experiments were performed to evaluate the eIRIS method. The images generated by IRIS without B₀ correction contain severe artifacts. eIRIS obtains results without noticeable artifacts and comparable to those of IRIS with B₀ correction and GRAPPA with a compact kernel (GRAPPA-CK) method. eIRIS slightly outperforms GRAPPA-CK in the terms of normalized root-mean-square error and signal-to-noise ratio. eIRIS has the potential to obtain high-quality diffusion-weighted images and will benefit the research and clinical diagnosis of spinal cord.

Motion-robust sub-millimeter isotropic diffusion imaging through motion corrected generalized slice dithered enhanced resolution (MC-gSlider) acquisition

PURPOSE

To develop an efficient MR technique for ultra-high resolution diffusion MRI (dMRI) in the presence of motion.

METHODS

gSlider is an SNR-efficient high-resolution dMRI acquisition technique. However, subject motion is inevitable during a prolonged scan for high spatial resolution, leading to potential image artifacts and blurring. In this study, an integrated technique termed Motion Corrected gSlider (MC-gSlider) is proposed to obtain high-quality, high-resolution dMRI in the presence of large in-plane and through-plane motion. A motion-aware reconstruction with spatially adaptive regularization is developed to optimize the conditioning of the image reconstruction under difficult through-plane motion cases. In addition, an approach for intra-volume motion estimation and correction is proposed to achieve motion correction at high temporal resolution.

RESULTS

Theoretical SNR and resolution analysis validated the efficiency of MC-gSlider with regularization, and aided in selection of reconstruction parameters. Simulations and in vivo experiments further demonstrated the ability of MC-gSlider to mitigate motion artifacts and recover detailed brain structures for dMRI at 860 μm isotropic resolution in the presence of motion with various ranges.

CONCLUSION

MC-gSlider provides motion-robust, high-resolution dMRI with a temporal motion correction sensitivity of 2 s, allowing for the recovery of fine detailed brain structures in the presence of large subject movements.

High-resolution diffusion tensor imaging in cervical spondylotic myelopathy: a preliminary follow-up study

Diffusion imaging is a promising technique as it can provide microstructural tissue information and thus potentially show viable changes in spinal cord. However, the traditional single-shot imaging method is limited as a result of various image artifacts. In order to improve measurement accuracy, we used a newly developed, multi-shot, high-resolution, diffusion tensor imaging (DTI) method to investigate diffusion metric changes and compare them with T₂ -weighted (T2W) images before and after decompressive surgery for cervical spondylotic myelopathy (CSM). T2W imaging, single-shot DTI and multi-shot DTI were employed to scan seven patients with CSM before and 3 months after decompressive surgery. High signal intensities were scored using the T2 W images. DTI metrics, including fractional anisotropy (FA), axial diffusivity (AD), radial diffusivity (RD) and mean diffusivity (MD), were quantified and compared pre- and post-surgery. In addition, the relationship between imaging metrics and neurological assessments was examined. The reproducibility of multi-shot DTI was also assessed in 10 healthy volunteers. Post-surgery, the mean grade of cervical canal stenosis was reduced from grade 3 to normal after 3 months. Compared with single-shot DTI, multi-shot DTI provided better images with lower artifact levels, especially following surgery, as a result of reduced artifacts from metal implants. The new method also showed acceptable reproducibility. Both FA and RD values from the new acquisition showed significant differences post-surgery (FA, p = 0.026; RD, p = 0.048). These changes were consistent with neurological assessments. In contrast, T2W images did not show significant changes before and after surgery. Multi-shot diffusion imaging showed improved image quality over single-shot DWI, and presented superior performance in diagnosis and recovery monitoring for patients with CSM compared with T2W imaging. DTI metrics can reflect the pathological conditions of spondylotic spinal cord quantitatively and may serve as a sensitive biomarker for potential CSM management.