Synthesis of pH-sensitive poly (N,N-dimethylaminoethyl methacrylate)-grafted halloysite nanotubes for adsorption and controlled release of DPH and DS drugs

Functional Bio-Based Polymeric Hydrogels for Wastewater Treatment: From Remediation to Sensing Applications

In recent years, many researchers have focused on designing hydrogels with specific functional groups that exhibit high affinity for various contaminants, such as heavy metals, organic pollutants, pathogens, or nutrients, or environmental parameters. Novel approaches, including cross-linking strategies and the use of nanomaterials, have been employed to enhance the structural integrity and performance of the desired hydrogels. The evolution of these hydrogels is further highlighted, with an emphasis on fine-tuning features, including water absorption capacity, environmental pollutant/factor sensing and selectivity, and recyclability. Furthermore, this review investigates the emerging topic of stimuli-responsive smart hydrogels, underscoring their potential in both sorption and detection of water pollutants. By critically assessing a wide range of studies, this review not only synthesizes existing knowledge, but also identifies advantages and limitations, and describes future research directions in the field of chemically engineered hydrogels for water purification and monitoring with a low environmental impact as an important resource for chemists and multidisciplinary researchers, leading to improvements in sustainable water management technology.

Temperature-responsive and biocompatible nanocarriers based on clay nanotubes for controlled anti-cancer drug release

Administration of temperature-responsive drug carriers that release anticancer drugs at high temperatures can benefit hyperthermia therapies because of the synergistic effect of anticancer drug molecules and high temperature on killing the cancer cells. In this study, we design and characterize a new temperature-responsive nanocarrier based on a naturally occurring and biocompatible clay mineral, halloysite nanotubes. Poly(N-isopropylacrylamide) brushes were grown on the surface of halloysite nanotubes using a combination of mussel-inspired dopamine polymerization and surface-initiated atom transfer radical polymerization. The chemical structure of the hybrid materials was investigated using X-ray photoelectron spectroscopy, thermogravimetric analysis and energy-dispersive X-ray spectroscopy. The hybrid material was shown to have a phase transition temperature of about 32 °C, corresponding to a 40 nm thick polymer layer surrounding the nanotubes. Cell studies suggested that grafting of poly(N-isopropylacrylamide) brushes on the polydopamine-modified halloysite nanotubes suppresses the cytotoxicity caused by the polydopamine interlayer and drug release studies on nanotubes loaded with doxorubicin showed that thanks to the poly(N-isopropylacrylamide) brushes a temperature-dependent drug release is observed. Finally, a fluorescent dye molecule was covalently attached to the polymer-grafted nanotubes and stimulated emission depletion nanoscopy was used to confirm the internalization of the nanotubes in HeLa cells.

Optical Chemosensors based on Spiropyran-Doped Polymer Nanoparticles for Sensing pH of Aqueous Media

Photochromic polymers, which are prepared by the incorporation of photochromic compounds into polymer matrices, show fluorescence emission along with color change under UV light irradiation. Polymer nanoparticles yield high chromic properties at low chromophore loadings, as they have a large surface area to absorb a high level of light irradiation. Particle size is a significant parameter to control optical properties, where the decrease of particle size results in a high light absorption and efficiency of photochromism and fluorescence emission. Reverse atom transfer radical polymerization was used to synthesize methyl methacrylate homopolymer and its copolymers with different comonomers to yield polymers with a narrow molecular weight distribution. Spiropyran was doped to the polymeric nanoparticles during nanoprecipitation to yield photochromic polymer nanoparticles. Particle size below 100 nm for the photochromic nanoparticles was shown by dynamic light scattering. Morphology investigation with microscopic analysis showed spherical morphology for nanoparticles. The photochromic properties of the polymer nanocarriers were studied in both acidic and alkaline media. The results indicated that the pH of the media as well as the copolymer composition significantly affect the optical properties. Therefore, the photochromic polymer nanoparticles could have potential applications as optical pH chemosensors by colorimetric and fluorometric detection mechanisms. The nanoparticles with hydroxyl- or amine-functional groups were shown to be highly efficient for pH chemosensor applications. Finally, photochromic cellulosic papers prepared from the photochromic polymer nanoparticles were highly applicable in the detection of acid vapors.

Development of optical chemosensors based on photochromic polymer nanocarriers

Spiropyran-containing photochromic polymer nanoparticles with hydroxyl or amine functional groups and particle size of below 100 nm were used to design chemosensors for sensing pH of aqueous media.

Water treatment using stimuli-responsive polymers

Stimuli-responsive polymers are a new category of smart materials used in water treatment via a stimuli-induced purification process and subsequent regeneration processes.

Photoluminescent and Chromic Nanomaterials for Anticounterfeiting Technologies: Recent Advances and Future Challenges

Counterfeiting and inverse engineering of security and confidential documents, such as banknotes, passports, national cards, certificates, and valuable products, has significantly been increased, which is a major challenge for governments, companies, and customers. From recent global reports published in 2017, the counterfeiting market was evaluated to be $107.26 billion in 2016 and forecasted to reach $206.57 billion by 2021 at a compound annual growth rate of 14.0%. Development of anticounterfeiting and authentication technologies with multilevel securities is a powerful solution to overcome this challenge. Stimuli-chromic (photochromic, hydrochromic, and thermochromic) and photoluminescent (fluorescent and phosphorescent) compounds are the most significant and applicable materials for development of complex anticounterfeiting inks with a high-security level and fast authentication. Highly efficient anticounterfeiting and authentication technologies have been developed to reach high security and efficiency. Applicable materials for anticounterfeiting applications are generally based on photochromic and photoluminescent compounds, for which hydrochromic and thermochromic materials have extensively been used in recent decades. A wide range of materials, such as organic and inorganic metal complexes, polymer nanoparticles, quantum dots, polymer dots, carbon dots, upconverting nanoparticles, and supramolecular structures, could display all of these phenomena depending on their physical and chemical characteristics. The polymeric anticounterfeiting inks have recently received significant attention because of their high stability for printing on confidential documents. In addition, the printing technologies including hand-writing, stamping, inkjet printing, screen printing, and anticounterfeiting labels are discussed for introduction of the most efficient methods for application of different anticounterfeiting inks. This review would help scientists to design and develop the most applicable encryption, authentication, and anticounterfeiting technologies with high security, fast detection, and potential applications in security marking and information encryption on various substrates.

Past, Present and Future Perspectives on Halloysite Clay Minerals

Halloysite nanotubes (HNTs), clay minerals belonging to the kaolin groups, are emerging nanomaterials which have attracted the attention of the scientific community due to their interesting features, such as low-cost, availability and biocompatibility. In addition, their large surface area and tubular structure have led to HNTs' application in different industrial purposes. This review reports a comprehensive overview of the historical background of HNT utilization in the last 20 years. In particular it will focus on the functionalization of the surfaces, both supramolecular and covalent, following applications in several fields, including biomedicine, environmental science and catalysis.

Double stimuli-responsive cellulose nanocrystals reinforced electrospun PHBV composites membrane for intelligent drug release

Double stimuli-responsive functionalized cellulose nanocrystal-poly[2-(dimethylamino)ethyl methacrylate] (CNC-g-PDMAEMA) reinforced poly(3-hydroxybutyrate-co-3-hydroxy valerate) (PHBV) electrospun composite membranes were explored as drug delivery vehicles using tetracycline hydrochloride (TH) as a model drug. It was found that rigid CNC-g-PDMAEMA nanoparticles enhanced thermal, crystallization and hydrophilic properties of PHBV. Moreover, great improvements in fiber diameter uniformity, crystallization ability and maximum decomposition temperature (T_max) could be achieved at 6 wt% CNC-g-PDMAEMA. Furthermore, by introducing stimuli-responsive CNC-g-PDMAEMA nanofillers, intelligent and long-term sustained release behavior of composite membranes could be achieved. The releasing mechanism of composite membranes based on zero order, first order, Higuchi and Korsmeyere-Peppas mathematical models was clearly demonstrated, giving effective technical guidance for practical drug delivery systems.

Temperature-Responsive Poly(N-Isopropylacrylamide) Nanogels: The Role of Hollow Cavities and Different Shell Cross-Linking Densities on Doxorubicin Loading and Release

Smart polymers with extraordinary characteristics are studied in drug-delivery applications. In the current study, temperature-responsive hybrid core-shell nanoparticles were synthesized by precipitation polymerization of N-isopropylacrylamide and vinyl-modified silica nanoparticles. These temperature-responsive hybrid core-shells were prepared with different cross-linking densities by using 2, 4, and 8 mol % of N,N-methylene bisacrylamide (MBA). Hydrolysis of the silica cores of the hybrid core-shells resulted in hollow poly(N-isopropylacrylamide) (PNIPAM) nanogels. Functionalization of silica nanoparticles with vinyl-containing silane modifier of 3-(trimethoxysilyl) propyl methacrylate (MPS) in two different contents was proven by Fourier transform infrared spectroscopy. Preparation of the hybrid PNIPAM nanogels and etching of the silica cores were studied using thermogravimetric analysis and also electron microscopy imaging. Sensitivity of the PNIPAM nanogel samples to temperature was studied using ultraviolet-visible (UV-vis) spectroscopy. In addition, dynamic light scattering was used for investigation of the squeezing and expansion of the hybrid and hollow samples against variation of temperature. The UV-vis spectroscopy results display higher absorption intensities in higher contents of MPS modifier and MBA cross-linker. The swelling content of the nanogels with hollow cavities was higher than that of the hybrid samples. The hybrid nanogels with 2 and 8 wt % silica content and different cross-linking densities and also their hollow nanoparticles were used for loading and release of doxorubicin (DOX). The release characteristics of the DOX-loaded nanogels were studied at different temperatures using UV-vis spectroscopy. The DOX release was higher at temperatures lower than the gel collapse temperature of the PNIPAM network. Although the nanogels with hollow cavities displayed higher loading capacities, the release percentage was higher for the hybrid PNIPAM nanogels, which was confirmed by the experimental release profiles and mathematical models. The most appropriate fitting of the DOX release data from the PNIPAM nanogel samples was observed for the Korsmeyer-Peppas model. Cytotoxicity studies on HeLa cell line showed that drug-loaded hollow samples showed higher toxicity due to loading of a higher amount of DOX.

Light-, temperature-, and pH-responsive micellar assemblies of spiropyran-initiated amphiphilic block copolymers: Kinetics of photochromism, responsiveness, and smart drug delivery

Multi-responsive polymer assemblies are a significant class of smart polymers with potential applications in drug-delivery and gen-delivery systems. Poly(dimethylaminoethyl methacrylate) (PDMAEMA) is among the most applicable multi-responsive polymers that changes its physical and chemical properties in response to temperature, pH, and CO₂. Herein, different types of light-, temperature-, pH-, and CO₂-responsive polymer assemblies were developed based on multi-responsive PDMAEMA and hydrophobic poly(methyl methacrylate) blocks. In addition, spiropyran was incorporated at the chain ends by using spiropyran-initiated atom transfer radical polymerization method. Novel smart drug-delivery systems were developed by self-assembly of these amphiphilic block copolymers to micellar morphologies in aqueous media. Dynamic light scattering results showed that size of the polymer assemblies changed in response to pH variations (from 5 to 9), temperature changes (above the lower critical solution temperature (LCST) of PDMAEMA), and also UV light irradiation (wavelength of 365 nm). The LCST of PPDMAEMA showed a shift from 53 to 60 °C after isomerization of the SP to MC form, as a result of increase of polarity and water-solubility. The PDMAEMA block results in responsivity of the prepared copolymer assemblies to CO₂, which display pH variation from 8-8.6 to 5-6 after 2 min of CO₂ gas bubbling. All the multi-responsive micellar polymer assemblies showed various loading capacities and release profiles, and the DOX release can be controlled by pH, temperature, and light. The release efficiency is reached to 60-85% at pH 5.3, 80-90% at temperatures higher than the LCST of PDMAEMA (60 °C), and also 90-100% under UV light irradiation after 48 h. In summary, the multi-responsive polymer assemblies based on amphiphilic block copolymers containing spiropyran chain end groups in the current study have potential applications in smart drug-delivery systems, and offer controlling over the drug-release by different triggers, such as light irradiation, pH variation, and temperature change. A very low concentration of spiropyran molecules (one per polymer chain) showed light-controlling of drug-release from the assemblies with high efficiencies.

Stimulus-responsive polymeric nanogels as smart drug delivery systems

Nanogels are three-dimensional nanoscale networks formed by physically or chemically cross-linking polymers. Nanogels have been explored as drug delivery systems due to their advantageous properties, such as biocompatibility, high stability, tunable particle size, drug loading capacity, and possible modification of the surface for active targeting by attaching ligands that recognize cognate receptors on the target cells or tissues. Nanogels can be designed to be stimulus responsive, and react to internal or external stimuli such as pH, temperature, light and redox, thus resulting in the controlled release of loaded drugs. This "smart" targeting ability prevents drug accumulation in non-target tissues and minimizes the side effects of the drug. This review aims to provide an introduction to nanogels, their preparation methods, and to discuss the design of various stimulus-responsive nanogels that are able to provide controlled drug release in response to particular stimuli. STATEMENT OF SIGNIFICANCE: Smart and stimulus-responsive drug delivery is a rapidly growing area of biomaterial research. The explosive rise in nanotechnology and nanomedicine, has provided a host of nanoparticles and nanovehicles which may bewilder the uninitiated reader. This review will lay out the evidence that polymeric nanogels have an important role to play in the design of innovative drug delivery vehicles that respond to internal and external stimuli such as temperature, pH, redox, and light.

Fabrication and characterization of biocompatible pH responsive halloysite nanotubes grafted with sodium alginate for sustained release of phenytoin sodium

Schematic design of a new method for fabrication of biocompatible pH sensitive halloysite nanocomposites for controlled release of phenytoin sodium.

The light-controlling of temperature-responsivity in stimuli-responsive polymers

Light-controlling of phase separation in temperature-responsive polymer solutions by using light-responsive materials for reversible controlling physical and chemical properties of the media with an out-of-system stimulus with tunable intensity.

Light-Induced Aggregation and Disaggregation of Stimuli-Responsive Latex Particles Depending on Spiropyran Concentration: Kinetics of Photochromism and Investigation of Reversible Photopatterning

Light-controlling the physical and chemical properties of smart polymers by using photochromic compounds has been an interesting research subject. Incorporation of spiropyran (SP) on the surface of particles can induce photoswitchable aggregation/disaggregation to stimuli-responsive colloids. Herein, we developed a novel class of stimuli-responsive latex particles bearing SP with different contents (0, 0.5, 1, 3, and 5 wt %) by semicontinuous emulsifier-free emulsion copolymerization, which is able to change the particle size by light-induced aggregation/disaggregation in response to ultraviolet (UV) irradiation and visible light. The scanning electron microscopy images revealed the spherical morphology of the latex particles, with the size in the range of 400-900 nm. Light-induced aggregation and disaggregation of stimuli-responsive latex particles were investigated by dynamic light scattering and also confirmed by variation of transmittance during UV illumination time using ultraviolet-visible spectroscopy. The range of the light-induced shift in the particle size is about 200-600 nm (depending on the concentration of SP), where the reduction of transmittance upon UV irradiation (and conversely upon visible light) confirms the ability of latex particles for displaying reversible photoswitchable aggregation/disaggregation and also light-controlling the particle size. The kinetics of SP to merocyanine (MC) and MC to SP isomerizations were experimentally investigated and fitted by exponential equations. The photochromic latexes displayed remarkable photoswitchability and photofatigue resistant properties under alternating UV and visible light irradiation cycles. Additionally, these stimuli-responsive latexes displayed potential applications such as anticounterfeiting inks in erasable and rewritable writings on cellulosic papers for increasing safety in security documents.

Rewritable Anticounterfeiting Polymer Inks Based on Functionalized Stimuli-Responsive Latex Particles Containing Spiropyran Photoswitches: Reversible Photopatterning and Security Marking

Increase of safety in security documents by using anticounterfeiting inks based on fluorochromic and photochromic compounds has attracted a great deal of attention in the recent years. Herein, we developed novel functionalized stimuli-responsive latex particles containing spiropyran (1 wt %) by semicontinuous emulsifier-free emulsion polymerization, which are usable as anticounterfeiting inks for marking on security documents and also photopatterning on cellulosic papers. The size and morphology of the latex particles were characterized by scanning electron microscopy and dynamic light scattering and their functionality was characterized by Fourier-transform infrared spectroscopy. All the stimuli-responsive latexes are composed of spherical particles with different hydroxyl, epoxy, and carboxylic acid functional groups, and the size of the particles varies in the range of 400-900 nm. Additionally, the latex particles undergo a remarkable light-induced size variation (aggregation-disaggregation) upon UV illumination (365 nm), depending on the functional group type, as a result of π-π stacking interactions and also electrostatic attractions between the different particles. The photochromic behavior, kinetics of the SP ⇌ MC isomerization, photoswitchability, and photofatigue-resistant characteristics of the prepared latexes were extensively investigated. The results display that the photochromic behavior and SP ⇌ MC isomerization can significantly be influenced by the polar interactions between the functional groups and MC molecules. As a novel application, the prepared stimuli-responsive latexes were used as anticounterfeiting inks for writing on cellulosic paper and also security marking on several monies, where the written phrase displayed red fluorescence emission and coloration under and after UV illumination (365 nm), respectively. Additionally, the latexes were sprayed on cellulosic papers to prepare stimuli-responsive papers for investigation of their photopatterning ability under UV irradiation and different masking. The presence of functional groups and large particle sizes are the main effective factors for stabilization of the latex particles on cellulosic papers. This is the first report on application of functionalized stimuli-responsive latex particles containing spiropyran as anticounterfeiting inks for security marking and photopatterning on cellulosic papers, directly and without using further additives.

Synthesis of magnetic functionalized MWCNT nanocomposite through surface RAFT co-polymerization of acrylic acid and N-isopropyl acrylamide for removal of cationic dyes from aqueous solutions

In this study, magnetic multi-walled carbon nanotube (MMWCNT) composites were prepared via surface reversible addition fragmentation chain transfer (RAFT) co-polymerization of acrylic acid (AA) and N-isopropyl acrylamide (NIPAM) in the presence of Fe₃O₄ nanoparticles. First, a novel RAFT agent (RA) was prepared and then immobilized onto the surface of MWCNT to fabricate RA-g-MWCNT. Then, Fe₃O₄ nanoparticles were attached onto the surface of RA-g-MWCNT. Finally, RAFT co-polymerization of AA and NIPAM monomers was carried out via Fe₃O₄-g-RA-g-MWCNT RAFT agent. The structure and morphology of the prepared polymer-coated MWCNT was examined by FTIR, SEM, TEM, XRD, VSM, and TGA. The adsorption behaviours of the cationic dyes were studied. The equilibrium isotherm and kinetics of cationic dyes were investigated. Thermodynamics investigations also depicted that the adsorptions of cationic dyes were spontaneous and endothermic in nature. The synthesized dye adsorbent with high adsorption capacities, reusability, and easy recovery makes it as a good candidate for wastewater treatment.

Halloysite nanotubes in analytical sciences and in drug delivery: A review

Halloysite (HNT) is a natural inorganic mineral that has many applications in manufacturing. This review (with 192 references) covers (a) the chemical properties of halloysites, (b) the effects of alkali and acid etching on the loading capacity and the release behavior of halloysites, (c) the use of halloysite nanotubes in analytical sciences and drug delivery, and (d) recent trends in the preparation of magnetic HNTs. Synthetic methods such as co-precipitation, thermal decomposition, and solvothermal method are discussed, with emphasis on optimal magnetization. In the analytical field, recent advancements are summarized in terms of applications of HNT-nanocomposites for extraction and detection of heavy metal ions, dyes, organic pollutants, and biomolecules. The review also covers methods for synthesizing molecularly imprinted polymer-modified HNTs and magnetic HNTs. With respect to drug delivery, the toxicity, techniques for drug loading and the various classes of drug-halloysite nanocomposites are discussed. This review gives a general insight on the utilization of HNT in analytical determination and drug delivery systems which may be useful for researchers to generate new ideas. Graphical abstract Schematic presentation of the structure of halloysite nanotubes, selected examples of modifications and functionalization, and represetative field of applications.

Chemical modification of halloysite nanotubes for controlled loading and release

Clay minerals have been used for medical purposes from ancient times. Among them, the halloysite nanotube, an aluminosilicate of the kaolin group, is an emerging nanomaterial which possesses peculiar chemical characteristics. By means of suitable modifications, such as supramolecular functionalization or covalent modifications, it is possible to obtain novel nanomaterials with tunable properties for several applications. In this context the covalent grafting of suitable organic moieties on the external surface or in the halloysite lumen has been exploited to improve the loading and release of several biologically active molecules. The resulting hybrid nanomaterials have been applied as drug carrier and delivery systems, as fillers for hydrogels, in tissue regeneration and in the gene delivery field. Furthermore the loading and release of specific molecules have been also investigated for environmental purposes. This review summarizes the main developments in the halloysite modifications in the last 20 years with a particular attention to the development in the past two years.