Strong UV absorption by nanoparticulated lignin in polymer films with reinforcement of mechanical properties

A facile method to fabricate sustainable bamboo ethanol lignin/carboxymethylcellulose films with efficient anti-ultraviolet and insulation properties

Given the environmental concerns related to the non-degradability of conventional petroleum-based polymer films, the synthesis of biodegradable films utilizing natural polymers derived from biomass has emerged as a promising alternative, garnering significant attention in recent research endeavors. This research introduced an environmentally friendly and efficient method, utilizing extract liquid from the green ethanol pulping process as the solvent to completely dissolve carboxymethylcellulose into the film-forming liquid, and employing the solution pouring technique to successfully fabricate bamboo ethanol lignin/carboxymethylcellulose films (LCF). The findings revealed that the lignin content significantly influenced the LCF, endowing them with tunable mechanical properties, effective UV-blocking, and thermal insulation capabilities. With a lignin addition of 3.75 %, LCF-3.75 exhibited enhanced mechanical properties, characterized by a tensile strength of 19.4 MPa, along with superior UV-blocking efficiency, blocking 100 % of UVB and 99.81 % of UVA rays. Furthermore, relative to LCF-0, LCF-3.75 had been shown to possess enhanced hydrophobicity and thermal stability, culminating in the development of the composite films that showcased exceptional thermal insulation properties and biodegradability. The films not only harbored extensive application prospects as an anti-ultraviolet and heat-insulating glass films but also represented a potential avenue for the efficient utilization of lignin, thereby contributing to sustainable development.

Fractionation of beech wood cell walls into digestible cellulose-rich residues and photoluminescent lignin-rich precipitates via semi-flow hot-compressed water treatment with 2-naphthol

Utilization of cell wall components of woody biomass has attracted attention as alternatives for fossil fuels towards a sustainable society. A semi-flow hydrothermal treatment was used to fractionate the beech (Fagus crenata) wood into cellulose-rich residues and lignin-rich precipitates. The enzymatic saccharification of the cellulose component in the residue was enhanced significantly because the preferential delignification from the secondary wall increased enzyme accessibility. Meanwhile, the precipitated lignin was soluble in organic solvent and exhibited clear photoluminescence (PL) according to the chromophore distances. Furthermore, the carbocation scavenger, 2-naphthol, was impregnated into the beech wood to inhibit the lignin re-condensation reaction. As a result, the digestibility of the cellulose component in the residue increased because unproductive enzymatic binding of lignin and lignin re-condensation were both suppressed. In addition, the PL intensity of the precipitates was significantly enhanced, indicating that 2-naphthol bound to the lignin molecules influenced the PL properties. Overall, fractionation using a semi-flow hydrothermal treatment efficiently uses both polysaccharides and lignin, especially the impregnation of 2-naphthol provided advantages for both saccharides and lignin. Monosaccharides can be converted into valuable products via a sugar platform, and the lignin precipitates exhibit useful PL properties that give them significant potential as a feedstock for numerous valuable materials, such as fluorescence reagents and spectral conversion agents. The results presented herein provide insights that are crucial for the comprehensive utilization of cell wall components for sustainable biorefinery systems.

Natural lignocellulosic biomass structure inspired CNF/Lignin/PBAT composite film with thermoplastic, antibacterial and UV-blocking abilities

The development of a thermoplastic, biodegradable composite material to replace conventional polymers derived from petroleum was the main area of concentration. Herein, a method for preparing antibacterial, UV-blocking and degradable CNF/Lignin/PBAT composite films (CLP) using cellulose nanofibrils (CNF), lignin, and Poly (butylene adipate-terephthalate) (PBAT) as raw materials by solution casting method was described. With the adding of PBAT, the thermal stability, thermoplastic, mechanical properties were enhanced by improving the compatibility between components. The maximum tensile strength of CLP could reach 189.72 MPa, which increased 25.5 % compared to CNF/Lignin film. The average initial decomposition temperature could reach 321 °C, which was much higher than that of CNF and lignin. At the same time, its good heat-sealing performance made it suitable for practical use. Meanwhile, the composite films had excellent UV resistance and could block over 95 % of UV light. The antibacterial results indicated that the films had a good inhibitory effect on E. coli and S. aureus, with a maximum inhibitory ring diameter of 5.56 and 6.36 mm. In addition, the composite film also had excellent barrier capability to liquid and gas. The prepared film had potential to produce flexible packing, industrial compositing and biomedical fields.

Cellulose-based light-management film exhibiting flame-retardant and thermal-healing properties

The increased use and expansion of biomass applications offer a viable approach to diminish reliance on petroleum-derived resources and promote carbon neutrality. Cellulose, being the most abundant natural polymer on Earth, has garnered considerable attention. This study introduces a straightforward method to fabricate a cellulose-based multifunctional composite film designed for efficient light management, specifically featuring flame retardant and thermal-healing capabilities. The film incorporates a microfibrillated cellulose (MFC) matrix with functional components, namely benzoxazine resin (BR) and 2-hydroxyethyl methacrylate phosphate (HEMAP). Utilizing dynamic covalent crosslinking, the composite films exhibit satisfactory self-healing properties. The combined effects of BR and HEMAP contribute to the effective flame retardancy of the composite film. Furthermore, the resulting film shields ultraviolet and blue light, offering comfortable interior lighting by mitigating harsh light and extending light propagation. The film also demonstrates favorable water resistance and high tensile strength. The exceptional multifunctional properties, coupled with its safety and extended service life, position it as a potential optical management film for smart building materials.

Enhancement of mechanical and barrier properties of chitosan-based bionanocomposites films reinforced with eggshell-derived hydroxyapatite nanoparticles

In this study, Hydroxyapatite nanoparticles (HANPs), derived from eggshell waste, were employed to reinforce chitosan biopolymer-based films through the solvent-casting method. The impact of varying HANPs content (1%, 3%, 5%, and 10 wt %) in bionanocomposites was investigated. The influence of HANPs addition on the final film properties was comprehensively analyzed using Thermogravimetric Analysis (TGA), Differential Scanning Calorimetry (DSC), Dynamic Mechanical Analysis (DMA), mechanical (tensile) testing, and Water Vapor Permeability (WVP). The morphological aspects of bionanocomposites and the dispersion of nanoparticles within the matrix were studied using Scanning Electron Microscopy (SEM), Transmission Electron Microscopy (TEM), and X-ray Diffraction (XRD). The structural changes in the films were probed using Fourier-Transform Infrared Spectroscopy (FTIR) and X-ray Photoelectron Spectroscopy (XPS) techniques. Results indicated that the addition of 1% and 3% of HANPs exhibited a higher glass transition temperature and improved thermal stability in bionanocomposites. Films with 3% HANPs content exhibited a notable increase in tensile strength, showing a 61.54% increase, while films with 1% HANPs content displayed a 52% reduction in WVP compared to pristine chitosan films. These findings underscore the significant potential of chitosan-hydroxyapatite bionanocomposite films for applications in food packaging applications.

Preparation of uniform lignin/titanium dioxide nanoparticles by confined assembly: A multifunctional nanofiller for a waterborne polyurethane wood coating

We report a facile synthesis for lignin/titanium dioxide (TiO2) nanoparticles (LT NPs) at room temperature by confining assembly of lignin macromolecules. The LT NPs had a uniform nanosize distribution (average diameter ∼ 68 nm) and were directly employed as multifunctional nanofillers to reinforce a waterborne polyurethane wood coating (WBC). X-ray diffraction, Fourier-transform infrared spectroscopy, and X-ray photoelectron spectroscopy revealed the mechanism by which formed TiO2 confined lignin assembly. The LT NPs considerably increased the tensile strength of a WBC film from 16.3 MPa to 28.1 MPa. The WBC-LT NPs exhibited excellent ultraviolet (UV) A and UVB blocking performances of 87 % and 98 %, respectively, while maintaining 94 % transmittance in the visible region. Incorporating LT NPs into the WBC enhanced the coating performance (the hardness, adhesion, and abrasion resistance) on wood substrates. A quantitative color and texture analysis revealed that the LT NPs increased the decorativeness of actual wooden products. After nearly 1800 h of UV irradiation, wood coated with the WBC-LT NPs exhibited good color stability, where the original color remained unchanged or even became brighter. In this study, value-added valorization of lignin is enabled by using organic-inorganic nanofillers and insights are gained into developing multifunctional WBCs.

Sonochemical synthesis of lignin nanoparticles and their applications in poly (vinyl) alcohol composites

Lignin is a common and abundant byproduct of the pulp and paper industry and is generally burned to produce steam. Opportunities exist to acquire greater value from lignin by leveraging the properties of this highly conjugated biomacromolecule for applications in UV absorption and polymer reinforcement. These applications can be commercialized by producing value-added lignin nanoparticles (LNPs) using a scalable sonochemical process. In the present research, monodisperse LNPs have been synthesized by subjecting aqueous dispersions of alkali lignin to acoustic irradiation. The resulting particle size distribution and colloidal stability, as determined by dynamic light scattering, transmission electron microscopy and zeta potential analysis, of LNPs can be adjusted by varying the solution pH and ultrasonication energy. As-synthesized LNPs with a mean diameter of 204 nm were incorporated into poly (vinyl) alcohol (PVA) to prepare thin and flexible nanocomposite films using a simple solvent casting method. The addition of 2.5 wt% LNP increased the material's Sun Protection Factor up to 26 compared to 0 for neat PVA, while maintaining light transmission above 75 % in the visible spectra. In addition, the tensile strength and elastic modulus of the PVA nanocomposites improved by 47 % and 36 %, respectively. The presence of LNP also enhanced the thermal stability of the materials. Significantly, the proposed sonochemical process may be generally applicable to the synthesis of a range of naturally-derived LNPs for a variety of value-added applications.

Development of shelf life-extending packaging for vitamin C syrup based on high-density polyethylene and extracted lignin argan shells

Biobased packaging is an essential parameter in the pharmaceutical industry. In the present work, bio-composites consisting of high-density polyethylene (HDPE) as a matrix and lignin recovered from argan nut shells as filler were developed to investigate their potential use as packaging materials for vitamin C drugs. The lignin was extracted via alkali and klason processes, and the effects of the extraction method as well as the lignin content on the thermal, morphological, mechanical, and rheological properties of the produced composites, as well as their application for vitamin C packaging, were investigated. Among all the prepared packaging materials, the one with desirable results in pH, color stability, hardness, and mechanical characteristics was based on alkali lignin. It achieved its highest Young's modulus enhancement, 10.12 %, at 10 % alkali lignin loading, while the highest yield strain enhancement (4.65 %) was obtained with 2 % loading. When compared to neat HDPE and HDPE/klason lignin packaging materials, vitamin C solutions packed with this composite showed a lower oxidation rate, attributed to the extremely low pH variation and high color stability of the material, which decreased the rate of vitamin C degradation. According to these findings, HDPE/alkali lignin composite is a promising vitamin C syrup packaging material.

Functional surfaces, films, and coatings with lignin - a critical review

Lignin is the most abundant polyaromatic biopolymer. Due to its rich and versatile chemistry, many applications have been proposed, which include the formulation of functional coatings and films. In addition to replacing fossil-based polymers, the lignin biopolymer can be part of new material solutions. Functionalities may be added, such as UV-blocking, oxygen scavenging, antimicrobial, and barrier properties, which draw on lignin's intrinsic and unique features. As a result, various applications have been proposed, including polymer coatings, adsorbents, paper-sizing additives, wood veneers, food packaging, biomaterials, fertilizers, corrosion inhibitors, and antifouling membranes. Today, technical lignin is produced in large volumes in the pulp and paper industry, whereas even more diverse products are prospected to be available from future biorefineries. Developing new applications for lignin is hence paramount - both from a technological and economic point of view. This review article is therefore summarizing and discussing the current research-state of functional surfaces, films, and coatings with lignin, where emphasis is put on the formulation and application of such solutions.

Towards lignin valorization: lignin as a UV-protective bio-additive for polymer coatings

Interest in fossil-free, bio-based materials capable of protecting against the harmful effects of UV radiation is constantly growing. The functional groups within lignin are able to effectively absorb light in the visible and UV range, making lignin a good candidate as a bio-additive in UV-protective polymer coatings. In this work, unmodified and modified (by methacrylation) lignin of different origins (softwood [spruce] and hardwood [eucalyptus]) was used as a bio-additive within epoxy resin to develop UV-blocking coatings. Methacrylation of the lignin, as well as the presence of appropriate functional groups in the coatings was confirmed by FTIR spectroscopy. The colour properties of the coatings were additionally investigated whereby the chemical modification of lignin was found to significantly influence the colour of the biocomposite coating. The thermal properties and morphology were investigated by DSC and confocal microscopy, respectively. The results demonstrate that methacrylated lignin is a promising environmentally friendly UV-protective bio-additive for polymer coatings.

A review of the extraction methods and advanced applications of lignin-silica hybrids derived from natural sources

The global trend of increasing energy demand along the large volume of wastewater generated annually from the paper pulping and cellulose production industries are considered as serious dilemma that may need to be solved within these current decades. Within this discipline, lignin, silica or lignin-silica hybrids attained from biomass material have been considered as prospective candidates for the synthesis of advanced materials. In this study, the roles and linking mechanism between lignin and silica in plants were studied and evaluated. The effects of the extraction method on the quality of the obtained material were summarized to show that depending on the biomass feedstocks, different retrieval processes should be considered. The combination of alkaline treatment and acidic pH adjustment is proposed as an effective method to recover lignin-silica with high applicability for various types of raw materials. From considerations of the advanced applications of lignin and silica materials in environmental remediation, electronic devices and rubber fillers future valorizations hold potential in conductive materials and electrochemistry. Along with further studies, this research could not only contribute to the development of zero-waste manufacturing processes but also propose a solution for the fully exploiting of by-products from agricultural production.

Lignocellulose dissociation with biological pretreatment towards the biochemical platform: A review

Lignocellulose utilization has been gaining great attention worldwide due to its abundance, accessibility, renewability and recyclability. Destruction and dissociation of the cross-linked, hierarchical structure within cellulose hemicellulose and lignin is the key procedure during chemical utilization of lignocellulose. Of the pretreatments, biological treatment, which can effectively target the complex structures, is attractive due to its mild reaction conditions and environmentally friendly characteristics. Herein, we report a comprehensive review of the current biological pretreatments for lignocellulose dissociation and their corresponding degradation mechanisms. Firstly, we analyze the layered, hierarchical structure of cell wall, and the cross-linked network between cellulose, hemicellulose and lignin, then highlight that the cracking of β-aryl ether is considered the key to lignin degradation because of its dominant position. Secondly, we explore the effect of biological pretreatments, such as fungi, bacteria, microbial consortium, and enzymes, on substrate structure and degradation efficiency. Additionally, combining biological pretreatment with other methods (chemical methods and catalytic materials) may reduce the time necessary for the whole process, which also help to strengthen the lignocellulose dissociation efficiency. Thirdly, we summarize the related applications of lignocellulose, such as fuel production, chemicals platform, and bio-pulping, which could effectively alleviate the energy pressure through bioconversion into high value-added products. Based on reviewing of current progress of lignocellulose pretreatment, the challenges and future prospects are emphasized. Genetic engineering and other technologies to modify strains or enzymes for improved biotransformation efficiency will be the focus of future research.

Electrically conducting films prepared from graphite and lignin in pure water

In this study, we present electrically conducting self-standing graphite films consisting of lignin derivatives extracted by simultaneous enzymatic saccharification and comminution (SESC). Sonication of graphite powder in the presence of SESC lignin and pure water allows dispersion of the SESC-lignin-attached graphite without addition of other chemicals. The SESC-lignin-attached graphite having a diameter of several micrometers can be used as a surface electroconductive coating and molded into self-standing films by drying. The SESC-lignin-attached graphite film exhibits higher conductivity (∼2,075 S/cm) than graphite-based composites consisting of ordinary lignin derivatives. Manufacturing self-standing films of micrometer-sized graphite using SESC lignin enables high electrical conductivity of the SESC-lignin-attached graphite film. The size of the SESC-lignin-attached graphite is proportional to the conductivity of the film. The SESC-lignin-attached graphite also acts as an antiplasticizer and a conductive filler for polymer films, i.e., conductive films consisting of poly(ethylene glycol) or Li+ montmorillonite can be obtained through a water-based process.

Strong Cellulose-Based Light-Management Film with Ultraviolet Blocking and Near-Infrared Shielding Performance

Light-management materials play a great significant role in efficient-energy buildings because they reduce indoor energy consumption by adjusting to natural sunlight, enhancing heat insulation, and creating comfortable indoor lighting. Here, we fabricated an ecofriendly and sustainable lignocellulose-based light-management film via a facile homogenization and mechanical hot-pressing method without complicated treatment or toxic reagents. The resulting film exhibited a favorable ultraviolet (UV) blocking performance of 82.25% for UVA, high visible light transmittance, and high haze, with a desirable tensile strength of 197 MPa, which was significantly higher than those of most petroleum-based plastics. Accordingly, the film was further endowed with near-infrared absorption performance by spray-coating with lanthanum hexaboride (LaB₆) nanoparticles─there were almost no adverse effects on its light transmittance or mechanical strength. Meanwhile, the high haze of the film implied that it met the requirement for privacy protection in smart buildings. The MFC/lignin/LaB₆ composite film has potential applications in energy-saving buildings and optoelectronic devices.

Recycling of metallocene isotactic polypropylene: importance of antioxidants

Recycling of plastics is absolutely essential in a circular economy, especially in the case of commodity polymers from fossil resources, like isotactic polypropylene (iPP). Therefore, evaluation of the factors that are decisive for an optimum performance of the recycled based materials becomes mandatory for the obtainment of new products with optimal properties. One of the most important aspects is the protection of the plastics materials not only against the external degradation agents, but also from the radicals generated during their previous service life. Accordingly, several materials have been prepared by extrusion based on virgin iPP with different amounts of the same polypropylene severely degraded, which has been used as model component to be recycled. Previous to the extrusion, a mixture of antioxidants was added to all the samples, and special attention has been paid to consumption of those additives during the extrusion. The results show an increasing reduction of antioxidants with rising content of the degraded material. But, importantly, a rather analogous mechanical response has been found for all the recycled materials in relation to the virgin iPP, pointing out a satisfactory dilution effect of the existing degradation points within the virgin polymeric chains, and indicating the very relevant action of the antioxidants used.

Tunable Light Emission from Lignin: Various Photoluminescence Properties Controlled by the Lignocellulosic Species, Extraction Method, Solvent, and Polymer

This report describes the tunable light emission from lignin, which was achieved by carefully selecting the lignocellulosic species, extraction method, solvent, and polymer. Lignins comprising various taxonomic species with distinct primary structures exhibited diverse photoluminescence (PL) intensities and spectral patterns. Investigations probing how the solvent affects the PL properties revealed that the PL quenching phenomenon originated from the decreasing distance between aromatic moieties (luminophores). Therefore, polymers can play key roles as media to modulate the distance between luminophores, and the PL intensity can be enhanced by employing a relatively stiff polymer. In terms of the emission color, the PL spectral pattern can be tuned by changing the lignin primary structures or by deprotonating the phenolic hydroxyl groups. By modulating these influencing factors, various light emissions were obtained from lignins in solutions and transparent solid materials.

Developing highly transparent yet ultraviolet blocking fully biocomposite films based on chitin and lignin using ethanol/water as processing solvents

Developing fully biobased products with functionality in a green fashion is highly desirable to meet the increasing demand for environmental sustainability and mitigate "white pollution" by petroleum-based counterparts. Here, chitin from shrimp shells was propionylated to obtain chitin propionate (CP) with significantly improved solubility in organic solvents, organosolv lignin (OSL) was extracted from the forest harvest residuals. The fully biobased composite consisting of CP as a matrix and OSL as a UV-blocker were successfully prepared using acidic ethanol/water as a green processing solvent. The results indicated that the 5% OSL addition enabled the CP film to block approximately 98% UV light while allowing 71% visible light transmittance; tensile and thermal properties were also retained. Nearly 100% UV light was blocked with 20% OSL addition, but visible light transmittance was moderately sacrificed. This study provides an alternative solution to produce novel fully biobased films with high transparency yet excellent UV protection for potential packaging applications.

Influence of Newly Organosolv Lignin-Based Interface Modifier on Mechanical and Thermal Properties, and Enzymatic Degradation of Polylactic Acid/Chitosan Biocomposites

This article aimed to study the effects of chitosan fiber and a newly modifying agent, based on organosolv lignin, on mechanical and thermal performances and the enzymatic degradation of PLA/chitosan biocomposites. A newly modifying agent based on polyacrylic acid-grafted organosolv lignin (PAA-g-OSL) was synthesized via free radical copolymerization using t-butyl peroxide as the initiator. The biocomposites were prepared using an internal mixer and the hot-pressed method at various fiber loadings. The results demonstrate that the addition of chitosan fiber into PLA biocomposites remarkably decreases tensile strength and elongation at break. However, it improves the Young's modulus. The modified biocomposites clearly demonstrat an improvement in tensile strength by approximately 20%, with respect to the unmodified ones, upon the presence of PAA-g-OSL. Moreover, the thermal stability of the modified biocomposites was enhanced significantly, indicating the effectiveness of the thermal protective barrier of the lignin's aromatic structure belonging to the modifying agent during pyrolysis. In addition, a slower biodegradation rate was exhibited by the modified biocomposites, relative to the unmodified ones, that confirms the positive effects of their improved interfacial interaction, resulting in a decreased area that was degraded through enzyme hydrolysis.

Tunable Quantum Photoinitiators for Radical Photopolymerization

This review describes the use of nanocrystal-based photocatalysts as quantum photoinitiators, including semiconductor nanocrystals (e.g., metal oxides, metal sulfides, quantum dots), carbon dots, graphene-based nanohybrids, plasmonic nanocomposites with organic photoinitiators, and tunable upconverting nanocomposites. The optoelectronic properties, cross-linking behavior, and mechanism of action of quantum photoinitiators are considered. The challenges and prospects associated with the use of quantum photoinitiators for processes such as radical polymerization, reversible deactivation radical polymerization, and photoinduced atom transfer radical polymerization are reviewed. Due to their unique capabilities, we forsee a growing role for quantum photoinitiators over the coming years.

Nonflammable UV protective films consisting of clay and lignin with tunable light/gas transparency

In this paper, we present nonflammable UV protective films consisting of clay minerals and lignin derivatives. The nonflammable transparent films were produced by mixing clay with a lignin derivative extracted from plants by simultaneous enzymatic saccharification and comminution. The preparation procedure did not require hazardous chemicals. The optical properties and gas permeability of the films could be tuned by the components and phase separation structure of the clay minerals and lignin derivatives. In particular, the gas transmittance of the films could be controlled in the range of several mol m-2 s-1 Pa-1. The present film uses mineral and plant components as high-value industrial materials and reduces the environmental load of extracting limited petroleum-based resources.

Self-Assembly Preparation of Nano-Lignin/Cationic Polyacrylamide Complexes

The present work describes the preparation of nano-lignin particles from calcium lignosulfonate (CL). The nano-lignin was fabricated from colloidal lignin-polyacrylamide complexes via self-assembly. The sizes of the nano-lignin particles were examined by dynamic light scattering (DLS) and scanning electron microscopy (SEM). The results indicated that the average particle size of the prepared nano-lignin was approximately 100 nm. In addition, the obtained nano-lignin exhibited enhanced fluorescence intensity when compared with the original lignin, which might represent a potential application of this nano-particle product.

Ragauskas A. Recent Advances in the Application of Functionalized Lignin in Value-Added Polymeric Materials

The quest for converting lignin into high-value products has been continuously pursued in the past few decades. In its native form, lignin is a group of heterogeneous polymers comprised of phenylpropanoids. The major commercial lignin streams, including Kraft lignin, lignosulfonates, soda lignin and organosolv lignin, are produced from industrial processes including the paper and pulping industry and emerging lignocellulosic biorefineries. Although lignin has been viewed as a low-cost and renewable feedstock to replace petroleum-based materials, its utilization in polymeric materials has been suppressed due to the low reactivity and inherent physicochemical properties of lignin. Hence, various lignin modification strategies have been developed to overcome these problems. Herein, we review recent progress made in the utilization of functionalized lignins in commodity polymers including thermoset resins, blends/composites, grafted functionalized copolymers and carbon fiber precursors. In the synthesis of thermoset resins such as polyurethane, phenol-formaldehyde and epoxy, they are covalently incorporated into the polymer matrix, and the discussion is focused on chemical modifications improving the reactivity of technical lignins. In blends/composites, functionalization of technical lignins is based upon tuning the intermolecular forces between polymer components. In addition, grafted functional polymers have expanded the utilization of lignin-based copolymers to biomedical materials and value-added additives. Different modification approaches have also been applied to facilitate the application of lignin as carbon fiber precursors, heavy metal adsorbents and nanoparticles. These emerging fields will create new opportunities in cost-effectively integrating the lignin valorization into lignocellulosic biorefineries.

Sustainable Strategies in the Synthesis of Lignin Nanoparticles for the Release of Active Compounds: A Comparison

The preparation of nanoparticles represents a powerful tool for lignin valorization, as it combines easy methodologies with high application potential. Different synthetic strategies and various lignin sources have been employed in the process. However, the great variability in the lignin structure prevents a direct comparison of the so far reported lignin nanoparticles (LNPs), especially as regards their physicochemical and functional properties. To this purpose, two green protocols, that is, solvent-antisolvent and hydrotropic, were optimized and used to generate LNPs from the same softwood kraft lignin. The nanomaterials were fully characterized to extrapolate structure/property relationships and reveal any differences in the mechanism of self-assembly. Furthermore, tests on methylene blue entrapment capacity and release behavior at two different pH values (2.0 and 7.4) evidenced a clear dependence on the LNPs characteristics and thus on the strategy adopted for their production.

From cashew byproducts to biodegradable active materials: Bacterial cellulose-lignin-cellulose nanocrystal nanocomposite films

While the cashew culture is focused on processing and commercialization of cashew nuts, the pseudofruit (cashew apples) - highly perishable and of limited acceptance - are mostly wasted. The cashew tree pruning fiber (CTPF) is another interesting cashew byproduct. In this study, films have been made from bacterial cellulose produced from cashew apple juice, and added with lignin (0-15 wt%) and cellulose nanocrystals (0-8 wt%), both from CTPF, which enhanced tensile properties and decreased water vapor permeability of the films. Moreover, lignin, although imparting brown color and opacity to the films, was effective to provide the films with UV-absorbing and antioxidant properties, making the films interesting for packaging of food products susceptible to lipid oxidation. The films did not exhibit antimicrobial activity against bacteria or yeasts.

Ferric Ions Modified Polyvinyl Alcohol for Enhanced Molecular Structure and Mechanical Performance

The highly crystallized molecular structure of polyvinyl alcohol (PVA) makes the polymer with poor performance in mechanical strength and water resistance. To modify the molecular structure of PVA and to diminish the complicated procedures and environmental impacts, ferric ions (in ion composite form) have been used to set the interactions with the molecule chains of PVA. The crystallinity, chemical groups change, and mechanical performance of the polymer has been confirmed by X-ray diffraction (XRD), Fourier transform infrared spectroscope (FTIR), and the bonding/membrane tensile strength test. The crystallinity of PVA is reduced from 41.6% to 7.7% with the addition of 2.0% of ferric ions. The tensile strength of the modified PVA membrane is increased by 240%. Moreover, with tougher structure and improved fluidity, the strength of ferric ions modified PVA bonded wood samples is increased by 157%. The modification of PVA with ion composite may have vast applications in many fields, such as paper industry, wood adhesives, functional materials, and polymer structure design.