Emerging usage of plant-based coagulants for water and wastewater treatment

Current challenges of microalgae applications: exploiting the potential of non-conventional microalgae species

The intensified attention to health, the growth of an elderly population, the changing lifestyles, and the medical discoveries have increased demand for natural and nutrient-rich foods, shaping the popularity of microalgae products. Microalgae thanks to their metabolic versatility represent a promising solution for a 'green' economy, exploiting non-arable land, non-potable water, capturing carbon dioxide (CO2) and solar energy. The interest in microalgae is justified by their high content of bioactive molecules, such as amino acids, peptides, proteins, carbohydrates, polysaccharides, polyunsaturated fatty acids (as ω-3 fatty acids), pigments (as β-carotene, astaxanthin, fucoxanthin, phycocyanin, zeaxanthin and lutein), or mineral elements. Such molecules are of interest for human and animal nutrition, cosmetic and biofuel production, for which microalgae are potential renewable sources. Microalgae, also, represent effective biological systems for treating a variety of wastewaters and can be used as a CO2 mitigation approach, helping to combat greenhouse gases and global warming emergencies. Recently a growing interest has focused on extremophilic microalgae species, which are easier to cultivate axenically and represent good candidates for open pond cultivation. In some cases, the cultivation and/or harvesting systems are still immature, but novel techniques appear as promising solutions to overcome such barriers. This review provides an overview on the actual microalgae cultivation systems and the current state of their biotechnological applications to obtain high value compounds or ingredients. Moreover, potential and future research opportunities for environment, human and animal benefits are pointed out. © 2023 The Authors. Journal of The Science of Food and Agriculture published by John Wiley & Sons Ltd on behalf of Society of Chemical Industry.

Effectiveness of a natural coagulant based on common mallow (Malva sylvestris) in urban wastewater treatment

This study evaluated the effectiveness of a natural coagulant based on common mallow (Malva sylvestris) to remove turbidity in urban wastewater. A 22 factorial design was selected to determine the optimal dose and the working pH of the natural coagulant. Its potential was studied in 50.0-450 mg/L and 4.00-10.0 ranges of doses and pH, respectively. A simplex lattice mixture evaluated its effectiveness as a coagulant aid combined with aluminum sulfate (conventional coagulant). Mixture proportions 0.000-1.00 were studied for each component, finding the proportion more effective. Results showed that the coagulation treatment could be feasible since a turbidity removal efficiency of 73.7% can be achieved under optimal conditions (50.0 mg/L and pH of 10.0). Likewise, a turbidity removal of 58.9% is obtained using 250 mg/L and maintaining wastewater pH (7.45). This efficiency can be increased using 31.0% natural coagulant mixed with 69.0% aluminum sulfate at 250 mg/L without modifying the wastewater pH. This improvement was associated with the natural coagulant's high molecular weight and long-chained structure since these properties enhance settling time, floc size and strength, and low sludge production. These results support using common mallow as a natural coagulant, making its use more feasible in alkaline water pH or as a coagulant aid combined with aluminum sulfate for urban wastewater treatment. A cost of USD 370/Kg of natural coagulant was estimated, which is higher than conventional coagulants. However, a cost-effectiveness analysis of its implementation should be performed since process scaling costs could significantly reduce its price.

Reduction of Malnutrition Related to Unsafe Water Consumption in Developing Countries: Potabilization of Surface Water and Traditional Well Water, with Plant Extracts

The consumption of unsafe water in rural areas is a real public health problem in developing countries. This situation mainly affects children under five years of age and causes several deaths and many cases of malnutrition every year. The objective of this study was to evaluate and optimize the capacity of four local plant extracts in the potabilization of unsafe water. Thus, Moringa oleifera and Boscia senegalensis seeds, or Aloe vera and Opuntia ficus-indica mucilages were prepared in a solution and applied during a jar test as biocoagulants and bioflocculants on three raw water samples of 82.3 NTU, 549.8 NTU and 796.9 NTU. After treatment results showed that 0.9 g/L of Moringa biocoagulant or 1 g/L of Boscia biocoagulant applied with 0.4 mL of Aloe vera bioflocculant or 0.6 mL of Opuntia ficus-indica bioflocculant reduced the turbidity of each water sample to values less than 5 NTU after only 15 min of decanting. Moreover, the sanitary quality of the water treated by these different extracts showed a perfect conformity of the physicochemical and microbiological parameters with the standards of acceptability in drinking water decreed by the World Health Organization. Thus, the application of these local plant extracts has made it possible to considerably improve the quality of unsafe water in record time. Their popularization could be an alternative in the fight against malnutrition related to the consumption of unsafe water, especially in rural areas.

Assessment of Prickly Pear Fruit Peel Mucilage in Form of Gel as a Green Coagulant for the Tertiary Treatment of Domestic Wastewater

The application of natural coagulants derived from food byproducts in domestic wastewater tertiary treatment, which contains a number of impurities as suspended colloidal particles, has a potential use as essential substitutes for traditional inorganic coagulants. These biomaterials are a sustainable and environmentally friendly alternative that can be used to improve water quality and human health. In this study, prickly pear (PP) fruit peel mucilage gel was evaluated as a novel coagulant for the tertiary stage of domestic wastewater treatment. Jar tests were performed on residual raw water at the inlet (influent) and outlet (effluent) of the tertiary wastewater treatment (constructed wetland) with a coagulant dose of 12 mg L-1 at a pH of 13. The efficiency of green (i.e., mucilage) and inorganic chemical (i.e., FeCl3) coagulants was compared on the basis of turbidity and color removal. The flocs produced by the coagulants were characterized structurally by FTIR spectroscopy and Zeta potential analysis and morphologically by scanning electron microscopy (SEM). The results showed that the turbidity and the color removal efficiency of the mucilage compared to the FeCl3 at the outlet of the treatment (effluent) were practically the same, reaching 94% turbidity and 85-87% color removal efficiency with both coagulants. The structure and morphology of the flocs generated by the coagulants showed a higher content of organic matter trapped in the flocs. The floc formation observed mechanisms were adsorption/bridging for mucilage and charge neutralization for FeCl3. The results of this study demonstrated that the PP mucilage green coagulant can be used to enhance the quality of treatment of domestic wastewater in an eco-friendly and biodegradable manner.

Advancement of biochar-aided with iron chloride for contaminants removal from wastewater and biogas production: A review

The use of fossil fuels, emission of greenhouse gases (GHG) into the atmosphere, and waste pose a problem to the environment and public health that urgently needs to be dealt with. Among numerous chemical activating agents that can be added to anaerobic digestion (AD) to enhance nutrient removal and increase the quality and quantity of biomethane, iron chloride (FeCl₃) is the one that has the lowest cost and is the most environmentally friendly. This state-of-the-art review aims to revise the influence of FeCl₃ on the Brunauer-Emmett-Teller (BET) surface area of biochar and its ability to increase methane (CH₄) yield and remove contaminants from biogas and wastewater. The novelty of the study is that FeCl₃, an activating agent, can increase the BET surface area of biochar, and its efficacy increases when combined with zinc chloride or phosphoric acid. Regarding the removal of contaminants from wastewater and biogas, FeCl₃ has proven to be an effective coagulant, reducing the chemical oxygen demand (COD) of wastewater and hydrogen sulfide in biogas. The performance of FeCl₃ depends on the dosage, pH, and feedstock used. Therefore, FeCl₃ can increase the BET surface area of biochar and CH₄ yield and remove contaminants from wastewater and biogas. More research is needed to investigate the ability of FeCl₃ to remove water vapor and carbon dioxide during biogas production while accounting for a set of other parameters, including FeCl₃ size.

Application of xanthan gum as coagulant-aid for decolorization of synthetic Congo red wastewater

In recent years, utilization of polysaccharides as natural coagulant and coagulant-aid has become a topic of interest, due to the nature of biopolymers that are renewable, biodegradable, and non-toxic. In this study, Congo red, as a model dye substance, was treated using polyaluminium chloride (PAC) as the main coagulant and xanthan gum as the coagulant aid. For this purpose, the effect of pH (3-9), xanthan gum dose (0.5-4 mg/L), and the initial concentration of Congo red dye (50-100 mg/L) to the dye removal and sludge volume were investigated. The outcome of this investigation indicates that the best pH for Congo red coagulation occurred at pH 3, due to the charge neutralization mechanism. The addition of coagulant-aid dose increases the %-removal and sludge volume until reaching the best coagulant-aid dose of 2 mg/L that results in a %-removal value of 93.81% and a sludge volume of 23.5 mL/L. Further addition of xanthan gum reduced the %-removal and sludge volume due to the inter-polymer force causing more difficult floc formation. The best initial concentration of dye occurred at a Congo red concentration of 50 mg/L, with a %-removal value of 93.81% with PAC (15 mg/L) and xanthan gum (2 mg/L) coagulants. This value is considerably higher than PAC and xanthan gum only which amounts to 81.16 and 7.18%, respectively. Based on these results, it is apparent that xanthan gum can positively contribute to dye coagulation while reducing the use of harmful inorganic coagulant.

Combined coagulation-electrocoagulation process using biocoagulant from the Opuntia ficus-indica for treatment of cheese whey wastewater

This work reports a combined coagulation-electrocoagulation process using a biocoagulant from the Opuntia ficus-indica for treatment of cheese whey wastewater. The process parameters as pH, biocoagulant dosage, and current density were evaluated from the chemometric tools. A Box-Behnken design was used, having as responses the removal percentages of turbidity and chemical oxygen demand (COD). The results showed that for the studied variable ranges, linear models were obtained and the pH was parameter more significant for treatment proposed. The pH showed synergic effect with the investigated parameters, while the biocoagulant dosage and density current showed antagonistic effects. The desirability function was used to optimization of process, and suggested values were pH 10.0, biocoagulant dosage of 4.4 g L^-1, and current density of 31.5 mA cm^-2, which showed removals of turbidity and COD of 98.9 and 83.8%, respectively.

A new efficient tannin-based flocculant made by a new modification idea: multiple rounds of Mannich reaction with aminated tannins as ammonia chloride

This research provided a new modification idea and made a new high-efficiency plant-based flocculant through the three rounds of reactions using tannin, formaldehyde, and ammonia chloride. Tannins as a concerned natural flocculant are mainly through a round of Mannich reaction to cationic modification now. This research provided a new cationic modification idea with the three rounds of Mannich reactions to obtain a modified tannin with a larger molecular weight and more complex structure. The synthesis and flocculation tests were conducted to study the effects of rounds of reaction, reactants ratio, reaction time of each round, and pH on the flocculation ability of the synthetically modified tannins. The increased flocculation capacity of modified tannins occurred with the increased rounds of reactions by increasing the electric neutralization and bridging capacity. The results of this research showed the increased flocculation capacity of the modified tannins with the increased ratio ((formaldehyde or ammonium chloride)/tannin). The flocculation capacity of the modified tannins is the greatest in the appropriate reaction time of each round (4 + 4 h) and pH (pH = 2). According to model fitting, the optimal synthesis condition is 1:6.094:6.094, 7.092 h, and pH = 2.476, which has been tested experimentally. The new modification idea and new high-efficiency modified tannin are very meaningful to the application of environmentally friendly flocculants and to solve the disadvantages of traditional chemical flocculants.

Evaluation of Turbidity and Color Removal in Water Treatment: A Comparative Study between Opuntia ficus-indica Fruit Peel Mucilage and FeCl3

Natural coagulants derived from by-products have gained popularity as sustainable alternatives to inorganic coagulants in water/wastewater treatment due to their abundant availability, biodegradability, low cost, easy disposal and low sludge volumes. In this study, the mucilage obtained from the peel of Opuntia ficus-indica fruit was evaluated as a biocoagulant for treating synthetic turbid water and compared with a traditional chemical coagulant (FeCl₃). The effects of coagulant dosage and pH on the turbidity and color-removal efficiency of synthetic turbid water were analyzed. To estimate the coagulation mechanism, the flocs produced under optimal values were characterized structurally (FTIR and zeta potential) and morphologically (SEM). The optimal condition for the removal of turbidity and color was a coagulant dose of 12 mg/L at pH 13. For the optimal values, the biocoagulant and the FeCl₃ presented a maximum removal of 82.7 ± 3.28% and 94.63 ± 0.98% for turbidity and 71.82 ± 2.72% and 79.94 ± 1.77% for color, respectively. The structure and morphology of the flocs revealed that the coagulation mechanism of the mucilage was adsorption and bridging, whereas that of FeCl₃ was charge neutralization. The results obtained showed that the mucilage could be used as an alternative coagulant to replace FeCl₃.

Protein fractionation of Hibiscus cannabinus (kenaf) seeds, its characterization, and potential use for water treatment

This study evaluates the coagulation performance of kenaf protein fractions (KPFs) comprising of albumin (AlbKP), globulin (GloKP), prolamin (ProKP), and glutenin (GluKP), in the treatment of high (500 NTU), medium (150 NTU), and low (30 NTU) turbidity water. Based on preliminary experimental results, the study focused on GloKP due to it outperforming the other kenaf coagulation products (KCPs) in all water types tested. The influence of GloKP, both as a primary coagulant and coagulant aid to aluminum sulfate (AS) on organic matter removal, was examined. Parametric analysis on turbidity, TSS, pH, dosages, retention time, and KPFs storage time was completed. Results indicated that GloKP could be used both as a primary coagulant and coagulant aid. GloKP had a higher turbidity and solids removal than the AlbKP and other KPFs (ProKP and GluKP). Solution pH greatly influenced the performance of the GloKP, and optimum dosage at pH 2 resulted in the highest organic matter removal. High dosages also resulted in negative mobility of particles and a more stable suspension. When used as a coagulant aid to AS, GloKP was more effective in removing dissolved organic carbon (DOC). Scanning electron microscopy elemental analysis (SEM-EDAX) and Fourier transform infrared (FT-IR) spectra showed the structure of the KPFs. SEM-EDAX indicated the presence of metal cations capable of forming complexes essential for flocs formation. The enhanced floc formation, detailed in this paper, is ascribed to the collective effect of charge neutralization of the AS species and the adsorption and bridging effect of the GloKP, which improves the bonds formed between flocs. The coagulation-flocculation process can be significantly improved using dual coagulants. GloKP was also an excellent alternative to its crude (CrKP) and solvent extract (HxKP) form for removing suspended and dissolved particles from all water types. PRACTITIONER POINTS: Kenaf protein fractionates can destabilize stable particles. The globulin protein fractionate (GloKP) aggregated the most particles and contained least dissolved organic material. GloKP is pH sensitive with pH 2 reported as best working pH. Coagulant dosage and coagulation mechanism were assessed.

Use of tannin-based coagulant and chlorine dioxide in treating brewing water: reduction of trihalomethanes and impact on physicochemical and sensory quality

This study aimed to evaluate an alternative to reduce trihalomethane (THM) formation in brewing water. THM affects the organoleptic properties of water and, consequently, the produced beer. Water treatment based on common chemicals such as alum and free chlorine could potentially form THM. Therefore, we studied the replacement of chemicals used in water treatment: aluminum sulfate by a tannin-based coagulant and sodium hypochlorite by chlorine dioxide. Experimentally, jar tests were conducted, and the role of coagulants and oxidizing agents was evaluated for: the removal of apparent color, turbidity, natural organic matter (NOM) and microorganisms; the formation of trihalomethanes (THM); and the sensory quality of the water. Using tannin-based coagulant with chlorine dioxide was associated with the lowest THM in treated water (1.7 µg/L) and higher satisfaction in the sensory analysis. However, using these chemicals make the water treatment more expensive than the current strategy. Overall, using the tannin-based coagulant and chlorine dioxide treatment is an alternative to produce water with a lower THM concentration, better physical-chemical, and sensory quality. These findings motivate further brewing experiments and a deeper economics evaluation considering the process's sustainability.

Plant-based coagulants/flocculants: characteristics, mechanisms, and possible utilization in treating aquaculture effluent and benefiting from the recovered nutrients

The increasing intensification of the aquaculture industry requires the development of new strategies to reduce the negative impacts of wastewater on the environment. Plant-based coagulants/flocculants, regarded as one of the environmentally friendly technologies for wastewater treatment, show good performance in the removal of suspended solids from wastewater. The aforementioned technology involves the utilization of plants as coagulants/flocculants in the treatment process and produces nontoxic sludge as treatment by-products. The produced sludge could be converted into valuable compounds used in agriculture. This review summarizes coagulation-flocculation by using plant-based coagulants/flocculants, its mechanisms, operational factors that control the treatment process, and its application in the treatment of wastewater, especially aquaculture effluent. Moreover, this work discusses the potential utilization of aquaculture sludge as a valuable compound used in agriculture. The presented review aims to emphasize the potential of using plant-based coagulants/flocculants in the treatment of aquaculture effluent and explore the potential of using the produced sludge as fertilizer for plants to solve problems related to sludge handling and the toxicity of inorganic coagulants in a recirculating aquaculture system. This paper concluded that utilization of recovered nutrients in the form of solids is feasible for agricultural purposes, while a hydroponic system can be used to reclaim the nutrients in the form of solution.

A Synergistic Effect of Moringa oleifera-Based Coagulant and Ultrafiltration for the Wastewater Treatment Collected from Final ETP

Provision of safe drinking water, devoid of aetiologies, is an all-time challenge due to the usage of unsafe chemicals in most of the water treatment processes. The main objective of the present paper is to evaluate the use of Moringa oleifera (MO) as a natural coagulant in coagulation/flocculation (C/F) followed by the ultrafiltration (UF) of Final Effluent Treatment Plant wastewater treatment which can also be employed as an alternative to the present conventional methods of treatment. Process efficiency was evaluated in terms of chemical oxygen demand (COD), biochemical oxygen demand (BOD), turbidity, total hardness, alkalinity, ammoniacal nitrogen, and zeta potential along with permeability and fouling behaviour of the membrane. A significant improvement in both the physical and chemical characteristics of the effluent quality is showing a clearer colour and a greater reduction in BOD (89.74%) and COD (63.80%) values, while pH was in the acceptable range for effluent disposal. The results indicate a lower membrane fouling rate (49%), an increase in permeate flow, and better quality of the permeate, proving that the C/F-UF treatment is an effective and efficient technique for wastewater treatment. Eventually, the treated wastewater obtained with this process generates better quality water and preserves the aquatic ecosystem.

A review of plant-based coagulants for turbidity and cyanobacteria blooms removal

In recent years, the proliferation of Harmful Cyanobacterial Blooms (CyanoHABs) has increased with water eutrophication and climate change, impairing human health and the environment in relation to water supply. In drinking water treatment plants (DWTPs), the bio-coagulation based on natural coagulants has been studied as an eco-friendly alternative technology to conventional coagulants for both turbidity and CyanoHABs removal. Plant-based coagulants have demonstrated their coagulation efficiency in turbidity removal, as reported in several papers but its ability in cyanobacterial removal is still limited. This paper mainly reviewed the application of plant-based coagulants in DWTPs, with focus on turbidity removal, including cyanobacterial cells. The future potential uses of these green coagulants to reduce noxious effects of cyanobacterial proliferation are presented. Green coagulants advantages and limitations in DWTPs are reviewed and discussed summarizing more than 10 years of knowledge.

Tannin-based coagulants: Current development and prospects on synthesis and uses

Population growth, industrialization, urbanization, and agriculture lead to a decrease in the availability of clean water. Coagulation/flocculation is one of the most common operations in water, urban wastewater, and industrial effluents treatment systems. Usually, this process is achieved using conventional coagulants that have their performance affected by pH, are poorly biodegradable, produce a huge volume of sludge, and are associated with degenerative diseases. As a substitute for these chemicals, natural coagulants have been highly researched for the last ten/fifteen years, especially the tannin-based (TB) ones. This review paper highlights the advantages of using these greener products to treat different types of water, wastewater, and effluents, especially from dairy, cosmetics, laundries, textile, and other industries. TB coagulants can successfully remove turbidity, color, suspended solids, soluble organic (chemical/biochemical oxygen demand) and inorganic matter (total phosphate, and heavy metals), and microorganisms. TB coagulants are compatible with other treatment technologies and can be used as coagulant-aid to reduce the consumption of chemicals. TB coagulants can reduce operating costs of water treatment due to less alkalinity consumption, as pH adjustment is sometimes unnecessary, and the production of a smaller volume of biodegradable sludge. TB coagulants can be synthesized by valorizing wastes/by-products, from the bark of some specific trees and skins/pomace of different fruits and vegetables. The strengths, weaknesses, opportunities, and threats (SWOT) on TB coagulants are discussed. The progress of TB coagulants is promising, but some threats should be overcome, especially on tannin extraction and cationization. The market competition with conventional coagulants, the feasibility of application in real waters, and the reluctance of the industries to adapt to new technologies are other weaknesses to be surpassed.

Exploring the extraction methods for plant-based coagulants and their future approaches

The application of plant-based coagulants in wastewater treatment has increasingly progressed in the coagulation-flocculation process toward green economy and cleaner production. Plant-based coagulants have a potential as essential substitutes for commercially used chemical coagulants because of their natural characteristics and biodegradability. Chemical coagulants leave residues in treated water and generated sludge, which cause harm to human health and the ecosystem. Thus, the exploration of plant-based coagulants in wastewater treatment could reduce and eliminate the potential damage of chemical coagulants and promote the alternative approach for sustainable environment. The general processing steps of the end-to-end plant-based coagulant production, which includes primary, secondary, and tertiary stages, are discussed. However, this review focuses more on the extraction process using different solutions and compares the performance of different coagulants in removal activities after effluent treatment. Discussion on the arising challenges is elaborated, and approaches for plant-based coagulant research in the near future are suggested.

Novel Copolymer Cationic from Agroindustrial Waste using Microwave

Background. A cationic copolymer has been developed as a substitute for synthetic coagulants, resulting in decreased pH, potential health problems, high costs, and large sludge volumes. Aim. This study evaluated the potential of banana pith in several treatments as a natural coagulant to reduce turbidity, COD, and color. Methods. The synthesis was carried out by inserting the cationic moiety of GTA (3-Chloro-2-hydroxypropyl trimethyl ammonium chloride) into the starch backbone by microwave radiation. Resulth. It has been found that the floculation characteristics depend on the charge neutralization, followed by the linkage between the copolymer chains. The results showed that the initial dose and concentration influenced the copolymer's flocculation performance. Conclusions. Natural polysaccharides can be modified becomes an effective flocculation material for treating clean water and wastewater

Sustainable groundwater treatment technologies for underserved rural communities in emerging economies

Worldwide, about one out of two people depend on groundwater resources to satisfy their drinking water needs. While groundwater typically is of higher quality than surface water, pollution and geologic conditions may require treating groundwater to meet safe water quality criteria. Herein, a critical overview is presented of water treatment technologies for rural and underserved communities in emerging economies that depend on groundwater. Given that small to medium sized rural communities in emerging economies often lack the financial resources to support technologically complex and expensive centralized public water treatment systems, the focus is on proven technologies that are sustainable and acceptable by the rural population. After an overview of the underlying treatment mechanisms and the principal groundwater contaminants targeted by the traditional, advanced, and experimental water treatment technologies, we identify the groundwater quality parameters that may impact or interfere with the technology performance. We also introduce enabling environmental factors that might govern the implementation of water treatment technologies in the target communities and a brief discussion of safe storage of water after treatment to underline the importance of protecting the water from re-contamination. Our overview is further supported by tabulated summaries of the principal (dis)advantages of each technology covered herein, including cost considerations and social acceptance. Overall, our review suggests that underserved rural communities have sustainable and affordable options for cases where the quality of local groundwater resources requires treatment.

'Green' coagulant application with activated carbon: dosing sequence and removal of selected micropollutants and effluent organic matter from municipal wastewater

Combination of 'green' coagulation and powdered activated carbon adsorption was tested for removal of benzophenone (BP), benzophenone-3 (BP-3) and caffeine (CF) from treated municipal wastewater at realistic concentration levels (1-2 µg/L). At the same time it was tracked how the process affected effluent organic matter (EfOM) by measuring chemical oxygen demand (COD). Green coagulant was produced from dry common bean seed in laboratory. Combined coagulation-adsorption experiments were performed by applying different dosing sequences of process materials. Removal of hydrophobic BP and BP-3 by separate adsorption (from 79 to 98%) was not significantly hindered by the addition of the coagulant (activated carbon dose of 5 or 20 mg/L). However, in some cases negative effects were observed for hydrophilic caffeine, depending on the carbon dose, dosing sequence and presence of total suspended solids (TSS). Thus, when coagulant was firstly added into water without TSS before low activated carbon dose of 5 mg/L, caffeine removal dropped from 26% to 5%. Conversely, when TSS were present in the water sample, the removal of caffeine was not hindered under the same PAC dose and dosing sequence. The importance of the process optimisation related to removal of organic micropollutans of different hydrophilicity has been shown in this paper. Removal of around 30% of COD regardless of the dosing sequence was achieved.

Tannin-based coagulant for harvesting microalgae cultivated in wastewater: Efficiency, floc morphology and products characterization

Tannin-based coagulants (TBCs) have the potential to be used to harvest microalgae cultivated at wastewater treatment plants. Their use would address the circular economy associated with the production of low-toxicity biomass and supernatant. Studies in this field are still scarce, and substantial gaps exist in the definitions of the flocculation process parameters. In this context, the objective of this work was to evaluate TBC performance as a natural coagulant for harvesting microalgae biomass grown in sanitary effluent digested in an up flow biofilter, as well establishing a path to enable recovery and reuse of wastewater nutrients. Classical removal techniques combined with image analysis and light scattering-based equipment were used to evaluate the coagulant performance, recovery efficiency, floc strength, and floc recovery compared to aluminum sulfate (AS). The results showed that TBC was able to efficiently harvest algal biomass from the effluent, achieving color, turbidity, and optical density (OD) removal efficiencies greater than 90% with only 5 min of sedimentation. The optimal harvesting dosage was 100 mg·L^-1 for TBC and 75 mg·L^-1 for AS. TBC presented the advantage of harvesting biomass without changing the pH of the medium and was also able to present satisfactory removal of the analyzed parameters (color, turbidity and OD) at pH values of 5.0, 7.0, and 8.5. In addition, TBC produced stronger flocs than AS, showing a better ability to resist breakage upon sudden shear rate variations. TBC produced macronutrient-rich biomass and supernatant that was similar to that produced with AS.

Potential of local plant leaves as natural coagulant for turbidity removal

The performance of local plants was tested using synthetic turbid water resembling real wastewater by measuring their ability to remove turbidity. The selected plants were A. indica, S. palustris, D. linearis, S. polyanthum, M. esculenta, P. sarmentosum, and M. malabathricum which can easily be found locally. The experiment was run based on coagulant dosages varied from 0 to 10 g/L for each plant with a rapid mixing speed at 180 rpm for 3 min, slow mixing speed at 10 rpm for 20 min, and settling time for 30 min. The results demonstrated that each plant has been capable of reducing turbidity by different amounts, with an increase in the coagulant dosage. The optimum coagulant dosages achieved for A. indica, S. palustris, S. polyanthum, and D. linearis were 10 g/L with turbidity removal at 26.9%, 24.9%, 24.9%, and 17.5%, respectively. P. sarmentosum and M. esculenta attained optimum coagulant dosages at 5 g/L with turbidity removal at 24.2% and 22.2%, and lastly M. malabathricum at 0.1 g/L (12.2%). P. sarmentosum was suggested to the best natural coagulant which achieved the highest removal of turbidity with a low dosage used.

Optimization of the humic acid separation and coagulation with natural starch by RSM for the removal of COD and colour from stabilized leachate

The removal of concentrated colour (around 5039 Pt-Co) and chemical oxygen demand (COD; around 4142 mg L^-1) from matured landfill leachate through a novel combination of humic acid extraction and coagulation with natural oil palm trunk starch (OPTS) was investigated in this study. Central composite design from response surface methodology of Design Expert-10 software executed the experimental design to correlate experimental factors with desired responses. Analysis of variance developed the quadratic model for four factors (e.g. coagulant dosage, slow mixing speed and time and centrifugation duration) and two responses (% removal of colour, COD). The model confirmed the highest colour (84.96%) and COD (48.84%) removal with a desirability function of 0.836 at the optimum condition of 1.68 g L^-1 coagulant dose, 19.11 rpm slow mixing speed, 16.43 minutes for mixing time and 35.75 minutes for centrifugation duration. Better results of correlation coefficient (R² = 0.98 and 0.96) and predicted R² (0.94 and 0.84) indicates the model significance. Electron microscopic images display the amalgamation of flocs through bridging. Fourier transforms infrared spectra confirmed the existence of selected organic groups in OPTS, which eventually signifies the applied method.

Influence of bionanoparticles to treat a slaughterhouse wastewater

Treatment of effluents from animal slaughterhouse industries is indispensable, standing out coagulation/flocculation/sedimentation processes. Bionanoparticles (BioNPs) (nanoparticles (NPs) functionalized with Moringa extracts (MO)) were studied as an alternative natural coagulant that would contribute to the microbial load reduction, without increasing the treated effluent toxicity. MO extracts were prepared with different salts, and then, in a kinetics study, different NPs mass and coagulant dosages were evaluated. In the best-defined conditions, microbial load, toxicity tests for the bioindicator Lactuca sativa, and NPs reuse evaluation were performed. Removals of 96.14% turbidity and 43.63% UV254nm were achieved when using 500 mg L-1 of BioNPs containing 60 mg of NPs for every 20 mL of MO extract prepared with 0.1 M CaCl2. The BioNPs with an external magnetic field also decreased the sedimentation time from 140 to 10 min compared to MO, and the process efficiency did not expressively decrease after reusing the recovered NPs. Through toxicity tests, BioNPs were not considered to leave residuals toxic to the Lactuca sativa in the treated effluent. Besides, the microbial load reduction was 97.33% for heterotrophic microorganisms and total mesophiles and 99.25% for moulds/yeasts. Therefore, a satisfactory primary treatment was achieved, contributing to the sustainability of industries.

Use of Aloe vera as an Organic Coagulant for Improving Drinking Water Quality

The coagulation–flocculation–sedimentation process is widely used for removal of suspended solids and water turbidity reduction. The most common coagulants used to conduct this process are aluminum sulfate and ferric sulfate. In this paper, the use of Aloe vera as a natural-based coagulant for drinking water treatment was tested. The bio-coagulant was used in two different forms: powder as well as liquid; the latter was extracted with distilled water used as a solvent. The obtained results showed that the use of the natural coagulant (Aloe vera) in both powder (AV-Powder) and liquid (AV-H2O) forms reduced the water turbidity at natural pH by 28.23% and 87.84%, respectively. Moreover, it was found that the use of the two previous forms of bio-coagulant for drinking water treatment had no significant influence on the following three parameters: pH, alkalinity, and hardness. The study of the effect of pH on the process performance using Aloe vera as a bio-coagulant demonstrated that the maximum turbidity removal efficiency accounted for 53.53% and 88.23% using AV-Powder and AV-H2O, respectively, at optimal pH 6.

Impact of influent deviations on polymer coagulant dose in warm lime softening of synthetic SAGD produced water

Warm lime softening is commonly used to reduce hardness, silica, and a small fraction of organic matter from steam-assisted gravity drainage (SAGD) produced water through the addition of lime, soda ash, MgO, coagulant and flocculant. We report a systematic study on the impact of solution chemistry on the epichlorohydrin-dimethylamine coagulant demand for the treatment of synthetic SAGD produced water. Concentrations of magnesium, calcium, sodium bicarbonate, clay (mimicking suspended solids), sodium metasilicate (representing silica), and humic acid (mimicking dissolved organic matter) were varied to study their impact on coagulant demand. The impact of the concentration of lime, soda ash, and MgO on coagulant demand was also studied. Within the studied concentration range, the coagulant dose increased linearly with increasing concentration of humic acid (Y_coagulant = 29 + 0.703X_HA) and silica (Y_coagulant = 52 + 0.537X_silica), and increased slightly with increasing concentration of lime and soda ash, but remained almost unchanged with increasing concentration of dissolved hardness, clay, or MgO. The observations were correlated to the understanding of the electrokinetic properties of CaCO₃ and Mg(OH)₂ particles in lime softening. The findings provide insights for evaluating onsite coagulant dose and optimizing the process.

Leachate treatment: comparison of a bio-coagulant (Opuntia ficus mucilage) and conventional coagulants using multi-criteria decision analysis

The main aim of this research was to compare a bio-coagulant, organic coagulant, and a conventional coagulant applied to the treatment of leachates. Coagulant options were Stage 1 FeCl₃, Stage 2 Polyamine, and Stage 3 Opuntia ficus mucilage (OFM). Optimal conditions for maximum chemical oxygen demand (COD) removal were determined by experimental data and Response Surface Methodology. The application of Multiple Criteria Decision Analysis using Multi-Criteria Matrix (MCM) was explored by evaluating the Coagulation–Flocculation processes. Maximum COD removal (%) and the best MCM scores (on a scale from 0 to 100) were: Stage 1: 69.2±0.9 and 48.50, Stage 2: 37.8±1.1 and 79.0, and Stage 3: 71.1±1.7, and 81.5. Maximum COD removal using FeCl₃ and OFM was not statistically different (p 0.15 < 0.05). OFM extraction process was evaluated (yield 0.70 ± 1.17%, carbohydrate content 32.6 ± 1.18%). MCM allows the evaluation of additional technical aspects, besides oxygen COD removal, as well as economic aspects, permitting a more comprehensive analysis. Significant COD removals indicate that the use of OFM as a coagulant in the treatment of stabilized leachate was effective. Opuntia ficus cladodes, a residue, were used to treat another residue (leachates).

Potential of Carica papaya Seed-Derived Bio-Coagulant to Remove Turbidity from Polluted Water Assessed through Experimental and Modeling-Based Study

It is important to develop renewable bio-coagulants to treat turbid water and efficient use of these bio-coagulants requires process optimization to achieve robustness. This study was conducted to optimize the coagulation process using bio-coagulant of deshelled Carica papaya seeds by employing response surface methodology (RSM). This bio-coagulant was extracted by a chemical-free solvent. The experiments were conducted using the Central Composite Design (CCD). Initially, the functional groups and protein content of the bio-coagulant were analyzed. The Fourier Transform Infrared Spectroscopy analysis showed that the bio-coagulant contained OH, C=O and C-O functional groups, which enabled the protein to become polyelectrolyte. The highest efficiency of the bio-coagulant was obtained at dosage of 196 mg/L, pH 4.0 and initial turbidity of 500 NTU. At the optimum conditions, the bio-coagulant achieved 88% turbidity removal with a corresponding 83% coagulation activity. These findings suggested that the deshelled Carica papaya seeds have potential as a promising bio-coagulant in treating the polluted water.

Application of Response Surface Methodology For Modeling and Optimization of A Bio Coagulation Process (Sewage Wastewater Treatment Plant)

Cactus has shown great capabilities as a bio coagulant/flocculent in the treatment of wastewater and as a factor for sustainable development of the environment, due to its abundance and non-toxicity for human health. This has encouraged the present study based on the design of experiments to optimize the two operating factors: the bio coagulant dosage and initial pH. The effect of these considered factors on turbidity and chemical oxygen demand (COD) reduction performances was investigated to treat sewage wastewater from plants by the coagulation/flocculation process using the response surface methodology (RSM) based on a central composite faced design (CCFD). The effect of the pH on the supernatant turbidity removal and the COD reduction was very significant whereas that of the coagulant dosage was insignificant on the COD removal efficiency. Experimental results revealed that the maximum reduction of turbidity and COD could be reached at a coagulant dosage of 28 mg/l and a pH of 12. At these optimal conditions, the removal efficiency of turbidity and COD was 98.33% and 96.55% respectively. By the end of the treatment, final values of 0.84 NTU and 20.8 mg/l were obtained for turbidity and COD, respectively. A notable decrease of orthophosphate (O- PO₄^-2), nitrite (N-NO₃^-), ammonium (N-NH₄⁺) and suspended matter (SM) was observed. The study also showed that the quadratic regression model could be used as a theoretical basis for the process based on a high coefficient of determination R² value > 0.96, obtained from the analysis of variances (ANOVA).

Challenges and Opportunities of Biocoagulant/Bioflocculant Application for Drinking Water and Wastewater Treatment and Its Potential for Sludge Recovery

The utilization of metal-based conventional coagulants/flocculants to remove suspended solids from drinking water and wastewater is currently leading to new concerns. Alarming issues related to the prolonged effects on human health and further pollution to aquatic environments from the generated nonbiodegradable sludge are becoming trending topics. The utilization of biocoagulants/bioflocculants does not produce chemical residue in the effluent and creates nonharmful, biodegradable sludge. The conventional coagulation-flocculation processes in drinking water and wastewater treatment, including the health and environmental issues related to the utilization of metal-based coagulants/flocculants during the processes, are discussed in this paper. As a counterpoint, the development of biocoagulants/bioflocculants for drinking water and wastewater treatment is intensively reviewed. The characterization, origin, potential sources, and application of this green technology are critically reviewed. This review paper also provides a thorough discussion on the challenges and opportunities regarding the further utilization and application of biocoagulants/bioflocculants in water and wastewater treatment, including the importance of the selection of raw materials, the simplification of extraction processes, the application to different water and wastewater characteristics, the scaling up of this technology to a real industrial scale, and also the potential for sludge recovery by utilizing biocoagulants/bioflocculants in water/wastewater treatment.

Assessment of natural coagulants to remediate Tunisian textile wastewater by combining physicochemical, analytical, and toxicological data

Due to the complexity and variability of textile wastewater composition, a constant search for new treatment strategies that are efficient, eco-friendly, and cost-effective is mandatory. In the present study, the efficiency of coagulation-flocculation using biocoagulants derived from cactus Opuntia ficus indica and eggplant Solanum melongena to remove toxic compounds from Tunisian textile wastewater samples was evaluated by combining assays to investigate physicochemical properties and in vitro (geno)toxicity with analytical chemistry. Both natural coagulants could significantly improve the physicochemical properties of the textile wastewater samples compared to the traditionally used chemical coagulant. The highest rate of decolorization was achieved after treatment with the cactus-derived coagulant. The analytical study revealed the presence of only crystal violet dye (CV) in only one sample. Both natural coagulants were able to remove CV, which may (partially) explain the decolorization of the treated samples. Only one untreated textile effluent induced a genotoxic response in the VITOTOX^® assay. The genotoxic effect was not linked to the presence of CV and was no longer observed after treatment with each of the natural coagulants, suggesting the effectiveness of the remediation treatments to remove potentially genotoxic compound(s). However, in the other genotoxicity tests, no biologically relevant effects were observed for any of the tested samples. In conclusion, although the physicochemical data indicate that the use of natural coagulants (cactus and eggplant) could be an interesting alternative treatment process to the chemical coagulant for detoxifying textile effluents, these results were only partially supported by the toxicological and analytical data.

Determination on inhibition effects of coagulants used in wastewater treatment plants on anaerobic digester

Domestic wastewaters causing pollution contain inorganic and/or organic materials. When the domestic wastewater outflows to the receiving waters, it causes physical, chemical, and biological pollution in them, and deteriorates the ecological balance of those waters. In the treatment of wastewater, various treatment methods are available depending on the pollution strength of the wastewater. Besides mechanical and biological methods, wastewater treatment with physicochemical methods is still one of the most effective and economical options. Particularly in wastewater with a high concentration of suspended solids, this method is very successful, and obtaining high suspended solids removal efficiencies is very possible. In this study, the effects of the use of coagulant and coagulant aid to be used in a treatment plant where domestic wastewater treatment is carried out are determined to increase the treatment efficiency of a biological treatment that comes later in the stages of the treatment. The effluent of the pre-settling tank may contain a lot of suspended solids. This presence of excess suspended solids decreases the efficiency at other levels of treatment and causes energy loss. In the experiments, the standard jar and inhibition tests are done as a method. As a result of the conducted studies, it is determined that the FeCl₃, Synthetic coagulant LP 526, FeClSO_4, and the combination of anionic polyelectrolyte yield the best results in the removal of the parameters of chemical oxygen demand (COD), total suspended solids (TSS), and volatile suspended solids (VSS). While FeCl₃, APE 65, APE 85, Synthetic coagulant LP 526, and FeClSO₄ did not show any inhibition effect in the sludge, APE 67, CPE 84, and (Al₂(SO₄)₃ are found to cause inhibition in the sludge.

Membrane Removal of Emerging Contaminants from Water: Which Kind of Membranes Should We Use?

Membrane technologies are nowadays widely used; especially various types of filtration or reverse osmosis in households, desalination plants, pharmaceutical applications etc. Facing water pollution, they are also applied to eliminate emerging contaminants from water. Incomplete knowledge directs the composition of membranes towards more and more dense materials known for their higher selectivity compared to porous constituents. This paper evaluates advantages and disadvantages of well-known membrane materials that separate on the basis of particle size, usually exposed to a large amount of water, versus dense hydrophobic membranes with target transport of emerging contaminants through a selective barrier. In addition, the authors present several membrane processes employing the second type of membrane.

Study to Investigate the Potential of Combined Extract of Leaves and Seeds of Moringa oleifera in Groundwater Purification

Several parts of the Moringa oleifera plant have revealed incredible potential for water quality improvement. However, the purification potential of a combined leaf and seed extract of Moringa oleifera plants remains unexplored. To the best of our knowledge, this research would be the first to work towards exploiting the combined potential of a leaf and seed extract of the Moringa oleifera plant in the process of water purification. In this study, we investigated the combined effectiveness of the leaf and seed extract in the purification of groundwater. The jar test method was used to analyze the effectiveness of Moringa plant extract (in combination) on different quality parameters of groundwater. Treatment with the combined plant extract (seed and leaf) resulted in significant improvement of various physicochemical (hardness, pH, turbidity, Total Dissolved Solid (TDS), and metallic impurities) and biological parameters (E.coli count) over individual seed and leaf extracts in groundwater samples. Experimental findings have strongly shown the enhanced purification efficacy of the hexane extract of combined plant materials in comparison to the individual extracts, thereby providing us with a potent natural coagulant that could combat the side effects of chemical coagulants.

Recent Achievements in Polymer Bio-Based Flocculants for Water Treatment

Polymer flocculants are used to promote solid-liquid separation processes in potable water and wastewater treatment. Recently, bio-based flocculants have received a lot of attention due to their superior advantages over conventional synthetic polymers or inorganic agents. Among natural polymers, polysaccharides show many benefits such as biodegradability, non-toxicity, ability to undergo different chemical modifications, and wide accessibility from renewable sources. The following article provides an overview of bio-based flocculants and their potential application in water treatment, which may be an indication to look for safer alternatives compared to synthetic polymers. Based on the recent literature, a new approach in searching for biopolymer flocculants sources, flocculation mechanisms, test methods, and factors affecting this process are presented. Particular attention is paid to flocculants based on starch, cellulose, chitosan, and their derivatives because they are low-cost and ecological materials, accepted in industrial practice. New trends in water treatment technology, including biosynthetic polymers, nanobioflocculants, and stimulant-responsive flocculants are also considered.

Characteristics of natural biopolymers and their derivative as sorbents for chromium adsorption: a review

Abstract

Chromium is widely used in industry, and improper disposal of wastewater and industrial residues containing excessive chromium can contaminate water and soil, endangering both environmental and human health. Natural biopolymers and their derivatives have been investigated for removal of chromium (Cr) from wastewater. Cellulose, lignin, tannin, chitin, chitosan, and polypeptides are abundant in nature, and have high potential as adsorbents due to their easy access, low cost, and the recyclability of the captured heavy metals. In order to improve their mechanical strength, recyclability, specific surface area, binding site number, and adsorption rate as adsorbents, native materials have also been modified. This review discusses the source of chromium contamination and the main species of interest, as well as their toxicity. The structures of the aforementioned biopolymers were analyzed, and the adsorption mechanism of chromium and the main influencing factors on this process are discussed. The modification methods of various adsorbents and their adsorption effects on chromium are also detailed, and the developmental direction of research on the use of biopolymer adsorption remediation to control chromium contamination is discussed.

Graphical abstract

Coagulating potential of Iranian oak (Quercus Branti) extract as a natural coagulant in turbidity removal from water

Because of the presence of tannin in the molecular structure of oak extract, this substance is used as a natural coagulant to remove turbidity from water. The aim of this study was to determine the efficiency of this coagulant alone and in combination with polyaluminium chloride (PACl) in turbidity removal from water under optimal conditions. In this experimental study, Iranian oak extract was prepared by maceration method using ethanol 96% as an extractor. Kaolin was used to prepare synthetic turbid water samples. Using the jar test, the optimum concentrations of oak extract and PACl were determined in various concentrations of initial turbidity and pH. Moreover, the central composite design (CCD) method was utilized to design experiments and RSM was applied for analyzing the obtained results. Optimum concentrations of oak extract and PACl were 62.6 mg/L and 52.6 mg/L, respectively. An increase in initial turbidity and pH led to an increase in turbidity removal by the two coagulants. The efficiency of turbidity removal by oak extract and PACl was 63.5% and 66.5%, respectively. The simultaneous application of oak extract and polyaluminium chloride increased removal efficiency (85%) and reduced the total organic carbon concentration (TOC) in water (42.3%). The results showed that the simultaneous application of Iranian oak extract and polyaluminium chloride had an acceptable performance in removing turbidity from water.

Click chemical assembly and validation of bio-functionalized superparamagnetic hybrid microspheres

Surface derivatized magnetic nanoparticles have been commonly used for magnetic separation. Facile mechanisms are needed to be developed for the design of bio-functionalized magnetic hybrid materials, where the surfaces can be re-generated for the re-use of the developed platforms. Superparamagnetic iron oxide nanoparticles with a diameter below 10 nm were synthesized via a novel microwave-assisted hydrothermal method in the presence of citrate ions, which allowed to obtain uniform and negatively charged nanoparticles. These were then coupled with Poly-l-lysine (PLL), forming micrometer-sized self-assembled spherical entities. Cross-linking the PLL within these microspheres with glutaraldehyde stabilized them chemically and mechanically. The active bio-functionality was introduced by a protein grafting methodology, using m-maleimidobenzoyl-N-hydroxysulfosuccinimide ester (SMBS). The Moringa oleifera Coagulant Protein (MOCP) from a seed extract was employed for its characteristic coagulation activity. The performance of the MOCP functionalized microspheres was evaluated as a function of turbidity removal of problematic colloidal clay from water via magnetic separation, resulting in over 80% of activity within 15 min. Surface of these hybrid materials can be re-generated by treatment with alcohol, allowing their easy magnetic separation and re-use. The rapid and strong response with tunable magnetic property makes these hybrid microspheres a powerful tool for many potential applications, due to the general applicability of the developed methodology.

Insight on Extraction and Characterisation of Biopolymers as the Green Coagulants for Microalgae Harvesting

This review presents the extractions, characterisations, applications and economic analyses of natural coagulant in separating pollutants and microalgae from water medium, known as microalgae harvesting. The promising future of microalgae as a next-generation energy source is reviewed and the significant drawbacks of conventional microalgae harvesting using alum are evaluated. The performances of natural coagulant in microalgae harvesting are studied and proven to exceed the alum. In addition, the details of each processing stage in the extraction of natural coagulant (plant, microbial and animal) are comprehensively discussed with justifications. This information could contribute to future exploration of novel natural coagulants by providing description of optimised extraction steps for a number of natural coagulants. Besides, the characterisations of natural coagulants have garnered a great deal of attention, and the strategies to enhance the flocculating activity based on their characteristics are discussed. Several important characterisations have been tabulated in this review such as physical aspects, including surface morphology and surface charges; chemical aspects, including molecular weight, functional group and elemental properties; and thermal stability parameters including thermogravimetry analysis and differential scanning calorimetry. Furthermore, various applications of natural coagulant in the industries other than microalgae harvesting are revealed. The cost analysis of natural coagulant application in mass harvesting of microalgae is allowed to evaluate its feasibility towards commercialisation in the industrial. Last, the potentially new natural coagulants, which are yet to be exploited and applied, are listed as the additional information for future study.

Bioelectrochemical systems for a circular bioeconomy

In the past two decades, bioelectrochemical systems (BESs) have received a considerable attention as a way of transforming wastewater directly to electricity and chemicals. Since BESs are capable of energy and chemical production by removing wastewater, these systems are considered promising sustainable waste-to-energy/chemical platforms and parts of circular bioeconomy. For the estimation of practical applicability of BESs in the circular bioeconomy, economic assessment of these systems is reviewed in this work. This estimation is necessary to decide whether BESs can be further developed for commercialization or there is any limiting factor for making the systems commercially viable in circular bioeconomy. This review also presents current developments of BESs, providing a critical review of the current status and challenges of techno-economic analysis for BESs. The results highlight the key factors to suggest the future research directions to make BESs economically available as a part of promising circular bioeconomy.

Technological Application of Tannin-Based Extracts

Tannins are polyphenolic compounds naturally found in vegetables. Their presence in nature has prompted their historical use in many different ways. The revision of their traditional utilization has allowed their further modification aiming for an industrial application. Sometimes these modifications have implied the addition of harmful substances such as formaldehyde, classified as a carcinogen of category B1. In other cases, these natural tannins have been replaced by synthetic compounds that threaten human and animal health and damage the environment. Therefore, currently, both academy and industry are searching for the substitution of these unsafe complexes by the increasing inclusion of tannins, natural molecules that can be obtained from several and diverse renewable resources, modified using harmless additives. To achieve promising results, cost-efficient and eco-friendly extraction methods have been designed. Once these green alternatives have been isolated, they have been successfully applied to many fields with very assorted aims of utilization such as coagulants, adhesives, floatation agents, tannings, dyes, additives, or biomolecules. Therefore, this review offers a global vision of the full process that involves the tannin’s technological application including an overview of the most relevant tannin sources, effective extraction methods, and their utilization in very diverse fields.