High activity and selectivity immobilized lipase on Fe 3 O 4 nanoparticles for banana flavour synthesis

Nanodiamonds and natural deep eutectic solvents as potential carriers for lipase

This study investigates the use of nanodiamonds (ND) as a promising carrier for enzyme immobilization and compares the effectiveness of immobilized and native enzymes. Three different enzyme types were tested, of which Rhizopus niveus lipase (RNL) exhibited the highest relative activity, up to 350 %. Under optimized conditions (1 h, pH 7.0, 40 °C), the immobilized ND-RNL showed a maximum specific activity of 0.765 U mg-1, significantly higher than native RNL (0.505 U mg-1). This study highlights a notable enhancement in immobilized lipase; furthermore, the enzyme can be recycled in the presence of a natural deep eutectic solvent (NADES), retaining 76 % of its initial activity. This aids in preserving the native conformation of the protein throughout the reusability process. A test on brine shrimp revealed that even at low concentrations, ND-RNL had minimal toxicity, indicating its low cytotoxicity. The in silico molecular dynamics simulations performed in this study offer valuable insights into the mechanism of interactions between RNL and ND, demonstrating that RNL immobilization onto NDs enhances its efficiency and stability. All told, these findings highlight the immense potential of ND-immobilized RNL as an excellent candidate for biological applications and showcase the promise of further research in this field.

Advancements in enzyme immobilization on magnetic nanomaterials: toward sustainable industrial applications

Enzymes are widely used in biofuels, food, and pharmaceuticals. The immobilization of enzymes on solid supports, particularly magnetic nanomaterials, enhances their stability and catalytic activity. Magnetic nanomaterials are chosen for their versatility, large surface area, and superparamagnetic properties, which allow for easy separation and reuse in industrial processes. Researchers focus on the synthesis of appropriate nanomaterials tailored for specific purposes. Immobilization protocols are predefined and adapted to both enzymes and support requirements for optimal efficiency. This review provides a detailed exploration of the application of magnetic nanomaterials in enzyme immobilization protocols. It covers methods, challenges, advantages, and future perspectives, starting with general aspects of magnetic nanomaterials, their synthesis, and applications as matrices for solid enzyme stabilization. The discussion then delves into existing enzymatic immobilization methods on magnetic nanomaterials, highlighting advantages, challenges, and potential applications. Further sections explore the industrial use of various enzymes immobilized on these materials, the development of enzyme-based bioreactors, and prospects for these biocatalysts. In summary, this review provides a concise comparison of the use of magnetic nanomaterials for enzyme stabilization, highlighting potential industrial applications and contributing to manufacturing optimization.

Interfacial Hyperactivation of Candida rugosa Lipase onto Ca2Fe2O5 Nanoparticles: pH and Ionic Strength Fine-Tuning to Modulate Protein-Support Interactions

The current study provides a comprehensive look of the adsorption process of Candida rugosa lipase (CRL) on Ca2Fe2O5 iron oxide nanoparticles (NPs). Protein-support interactions were identified across a broad range of pH and ionic strengths (mM) through a response surface methodology, surface charge determination, and spectroscopic and in silico analyses. The maximum quantity of immobilized protein was achieved at an ionic strength of 50 mM and pH 4. However, this condition did not allow for the greatest hydrolytic activity to be obtained. Indeed, it was recorded at acidic pH, but at 150 mM, where evaluation of the recovered activity revealed hyperactivation of the enzyme. These findings were supported by adsorption isotherms performed under different conditions. Based on zeta potential measurements, electrostatic interactions contributed differently to protein-support binding under the conditions tested, showing a strong correlation with experimentally determined immobilization parameters. Raman spectra revealed an increase in hydrophobicity around tryptophan residues, whereas the enzyme immobilization significantly reduced the phenylalanine signal in CRL. This suggests that this residue was involved in the interaction with Ca2Fe2O2 and molecular docking analysis confirmed these findings. Fluorescence spectroscopy showed distinct behaviors in the CRL emission patterns with the addition of Ca2Fe2O5 at pH 4 and 7. The calculated thermodynamic parameters indicated that the contact would be mediated by hydrophobic interactions at both pHs, as well as by ionic ones at pH 4. In this approach, this work adds to our understanding of the design of biocatalysts immobilized in iron oxide NPs.

The Effect of a DC Magnetic Field on the AC Magnetic Properties of Oleic Acid-Coated Fe3O4 Nanoparticles

The AC magnetic properties of a sample of Fe₃O₄ nanoparticles coated with oleic acid have been investigated with the help of AC susceptibility measurements. In particular, several DC magnetic fields have been superimposed on the AC field, and their effect on the magnetic response of the sample has been analysed. The results show the presence of a double peak structure in the imaginary component of the complex AC susceptibility measured as a function of the temperature. A preliminary evaluation of the Mydosh parameter for both peaks gives the information that each one of them is associated with a different state of interaction between nanoparticles. The two peaks evolve both in amplitude and position when the intensity of the DC field is changed. The field dependence of the peak position shows two different trends, and it is possible to study them in the framework of the currently existing theoretical models. In particular, a model of non-interacting magnetic nanoparticles has been used to describe the behaviour of the peak at lower temperatures, whereas the behaviour of the peak at higher temperatures has been analysed in the framework of a spin-glass-like model. The proposed analysis technique can be useful for the characterisation of magnetic nanoparticles used in several types of applications, such as biomedical and magnetic fluids.

Nanometric Mechanical Behavior of Electrospun Membranes Loaded with Magnetic Nanoparticles

This work analyzes on nanoscale spatial domains the mechanical features of electrospun membranes of Polycaprolactone (PCL) loaded with Functionalized Magnetite Nanoparticles (FMNs) produced via an electrospinning process. Thermal and structural analyses demonstrate that FMNs affect the PCL crystallinity and its melting temperature. HarmoniX-Atomic Force Microscopy (H-AFM), a modality suitable to map the elastic modulus on nanometric domains of the sample surface, evidences that the FMNs affect the local mechanical properties of the membranes. The mechanical modulus increases when the tip reveals the magnetite nanoparticles. That allows accurate mapping of the FMNs distribution along the nanofibers mat through the analysis of a mechanical parameter. Local mechanical modulus values are also affected by the crystallinity degree of PCL influenced by the filler content. The crystallinity increases for a low filler percentage (<5 wt.%), while, higher magnetite amounts tend to hinder the crystallization of the polymer, which manifests a lower crystallinity. H-AFM analysis confirms this trend, showing that the distribution of local mechanical values is a function of the filler amount and crystallinity of the fibers hosting the filler. The bulk mechanical properties of the membranes, evaluated through tensile tests, are strictly related to the nanometric features of the complex nanocomposite system.

Immobilization of lipase in chitosan-mesoporous silica material and pore size adjustment

Mesoporous silica MCM-41 was modified by carboxyl groups and assembled with chitosan to produce a novel nanocarrier for the immobilization of lipase. The prepared composite was grafted with silane coupling agent KH560 to decrease the pore size of the mesoporous material and prevent the loss of shed lipase molecules. According to the characterization of the material before and after modification and determination of related parameters, the residual activity of the lipase fixed in the CTS-MCM-41 carrier was 85 % after seven repeated use cycles. The grafting rate of MCM-41 and shrinkage effect were maximized when the concentration of KH560 was 5.0 %, and the modification was performed at 4 h at 70 °C. Using glutaraldehyde as the crosslinking agent, the optimal conditions for enzyme immobilization involved a mass ratio of the carrier to enzyme of 4:1, glutaraldehyde solution volume of 3 %, reaction time of 3 h, and reaction temperature of 45 °C. Overall, the proposed innovative carrier for the fixation of lipase is stable and can physically control the free enzyme in the pore. Moreover, the efficient miniature lipase reactor can promote large-scale industrial production.

Covalent immobilization of lipase on an ionic liquid-functionalized magnetic Cu-based metal-organic framework with boosted catalytic performance in flavor ester synthesis

Enzymatic esterification plays an important role in the fields of chemistry and biotechnology. In this study, lipase was immobilized on an ionic liquid (IL)-modified magnetic metal-organic framework (MOF) and used to synthesize isoamyl acetate. The immobilized lipase (PPL-ILs/Fe₃O₄@MOF) showed 2.1-fold and 1.8-fold higher activity compared to the free and immobilized lipase without ILs (PPL-Fe₃O₄@MOF), respectively. In addition, the anti-denaturant ability and reusability of the PPL-ILs/Fe₃O₄@MOF were also higher than those of other samples. The ester yield reached 75.1% when the biocatalyst was used to synthesize isoamyl acetate in hexane. The synthesized supports supplied a good microenvironment for the immobilized lipase through multiple interactions. Results of the structural analysis showed that the conformation state of lipase molecules changed after immobilization. The magnetism of the prepared biocatalyst makes it easy to recycle so that PPL-ILs/Fe₃O₄@MOF maintained 70.2% of the initial activity after eight cycles. The prepared composite materials exhibited good potential in lipase immobilization with enhanced catalytic ability and stability.

Industrial applications of immobilized nano-biocatalysts

Immobilized enzyme-based catalytic constructs could greatly improve various industrial processes due to their extraordinary catalytic activity and reaction specificity. In recent decades, nano-enzymes, defined as enzyme immobilized on nanomaterials, gained popularity for the enzymes' improved stability, reusability, and ease of separation from the biocatalytic process. Thus, enzymes can be strategically incorporated into nanostructured materials to engineer nano-enzymes, such as nanoporous particles, nanofibers, nanoflowers, nanogels, nanomembranes, metal-organic frameworks, multi-walled or single-walled carbon nanotubes, and nanoparticles with tuned shape and size. Surface-area-to-volume ratio, pore-volume, chemical compositions, electrical charge or conductivity of nanomaterials, protein charge, hydrophobicity, and amino acid composition on protein surface play fundamental roles in the nano-enzyme preparation and catalytic properties. With proper understanding, the optimization of the above-mentioned factors will lead to favorable micro-environments for biocatalysts of industrial relevance. Thus, the application of nano-enzymes promise to further strengthen the advances in catalysis, biotransformation, biosensing, and biomarker discovery. Herein, this review article spotlights recent progress in nano-enzyme development and their possible implementation in different areas, including biomedicine, biosensors, bioremediation of industrial pollutants, biofuel production, textile, leather, detergent, food industries and antifouling.

In Situ Calb Enzyme Immobilization in Mesoporous Material Type MCM-48 Synthesis Using Ionic Solid [C14MI]Cl as Structure-Directing Agent

MCM-48 mesoporous support was synthesized with the ionic solid 1-tetradecyl-3-methylimidazolium chloride ([C14MI]Cl) as a structure-directing agent for in situ immobilization of Candida antarctica B (CALB). The MCM-48[C14MI]Cl support showed characteristics of mesoporous material of interest, with a pore size of 20.30 and 73.41 A for the support without and with the enzyme, respectively. The elongation of the carbonic chain of the ionic solid directly influenced the increase in the specific area and pore volume of the material. In addition, the decrease in the specific area and pore volume for support with the enzyme showed the effectiveness of immobilization in situ. It was possible to obtain the ideal levels for the best activities of esterification of the enzyme with optimization of a mathematical model. The optimized variables were 0.31 g of enzyme and 3.35% of ionic solid with a maximum esterification activity of 392.92 U/g and 688% of yield. The support showed residual activity above 50% when stored under refrigeration for 75 days. At 60 and 80 °C, the enzyme immobilized on the support retained more than 80 and 40% of its residual activity, respectively. In addition, the support presented the possibility of reuse for up to 10 cycles with residual activity of approximately 50%. The support synthesized in the present study presents a great industrial opportunity for the immobilization and use of the CALB enzyme.

Immobilization of Candida rugosa lipase on magnetic chitosan beads and application in flavor esters synthesis

In this work, magnetic chitosan (MCH) beads were synthesized by phase-inversion method, and grafted with polydopamine (PDA) and then used for direct immobilization of Candida rugosa lipase by Schiff base reaction. The amount of immobilized enzyme and the retained activity were found to be 47.3 mg/g and 72.8%, respectively, at pH 7.0, and at 25 °C. The apparent Km (9.7 mmol/L), and Vmax (384 U/mg) values of the immobilized lipase were significantly changed compared to the free lipase. The MCH@PDA-lipase was better thermal and storage stability at different temperatures than those of the free lipase. In hexane medium, the esterification reaction results showed that the maximum conversions of isoamylalcohol and isopentyl alcohol to isoamyl acetate and isopentyl acetate using the MCH@PDA-lipase were found to be 98.4 ± 1.3% and 73.7 ± 0.7%, respectively. These results showed that the MCH@PDA-lipase can be used as an operative immobilized enzyme system for many biotechnological applications.

Electromagnetically Stimuli-Responsive Nanoparticles-Based Systems for Biomedical Applications: Recent Advances and Future Perspectives

Nanoparticles (NPs) in the biomedical field are known for many decades as carriers for drugs that are used to overcome biological barriers and reduce drug doses to be administrated. Some types of NPs can interact with external stimuli, such as electromagnetic radiations, promoting interesting effects (e.g., hyperthermia) or even modifying the interactions between electromagnetic field and the biological system (e.g., electroporation). For these reasons, at present these nanomaterial applications are intensively studied, especially for drugs that manifest relevant side effects, for which it is necessary to find alternatives in order to reduce the effective dose. In this review, the main electromagnetic-induced effects are deeply analyzed, with a particular focus on the activation of hyperthermia and electroporation phenomena, showing the enhanced biological performance resulting from an engineered/tailored design of the nanoparticle characteristics. Moreover, the possibility of integrating these nanofillers in polymeric matrices (e.g., electrospun membranes) is described and discussed in light of promising applications resulting from new transdermal drug delivery systems with controllable morphology and release kinetics controlled by a suitable stimulation of the interacting systems (nanofiller and interacting cells).

Covalent immobilization of lipase from Candida rugosa on epoxy-activated cloisite 30B as a new heterofunctional carrier and its application in the synthesis of banana flavor and production of biodiesel

In this paper, an epoxy-activated cloisite (ECL) was prepared as a new heterofunctional carrier via a reaction between cloisite 30B (CL) and epichlorohydrin and utilized for covalent immobilization of lipase from Candida rugosa. The lipase immobilized on the ECL (LECL) was successfully used in the olive oil hydrolysis, synthesis of isoamyl acetate (banana flavor), and biodiesel production. The TGA, FT-IR, SEM, and XRD were used to characterize CL, ECL, and LECL. The influences of temperature, pH, thermal stability, and storage capacity were examined in the olive oil hydrolysis. The effects of solvent, temperature, time, water content, and substrates molar ratio on the yields of ester and biodiesel were also investigated. In the optimized conditions, the hydrolytic activity of LECL was 1.85 ± 0.05 U/ mg, and the maximum yield of ester and biodiesel was 91.6% and 95.4%, respectively. The LECL showed good thermal stability and storage capacity compared to the free lipase. Additionally, LECL was reusable for both esterification and transesterification after being used for nine cycles.

Green Synthesized Magnetic Nanoparticles as Effective Nanosupport for the Immobilization of Lipase: Application for the Synthesis of Lipophenols

In this work, hybrid zinc oxide-iron oxide (ZnOFe) magnetic nanoparticles were synthesized employing Olea europaea leaf aqueous extract as a reducing/chelating and capping medium. The resulting magnetic nanoparticles were characterized by basic spectroscopic and microscopic techniques, namely, X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), fourier-transform infrared (FTIR) and atomic force microscopy (AFM), exhibiting a spherical shape, average size of 15-17 nm, and a functionalized surface. Lipase from Thermomyces lanuginosus (TLL) was efficiently immobilized on the surface of ZnOFe nanoparticles through physical absorption. The activity of immobilized lipase was found to directly depend on the enzyme to support the mass ratio, and also demonstrated improved pH and temperature activity range compared to free lipase. Furthermore, the novel magnetic nanobiocatalyst (ZnOFe-TLL) was applied to the preparation of hydroxytyrosyl fatty acid esters, including derivatives with omega-3 fatty acids, in non-aqueous media. Conversion yields up to 90% were observed in non-polar solvents, including hydrophobic ionic liquids. Different factors affecting the biocatalyst performance were studied. ZnOFe-TLL was reutilized for eight subsequent cycles, exhibiting 90% remaining esterification activity (720 h of total operation at 50 °C). The green synthesized magnetic nanoparticles, reported here for the first time, are excellent candidates as nanosupports for the immobilization of enzymes with industrial interest, giving rise to nanobiocatalysts with elevated features.

Immobilized lipases-based nano-biocatalytic systems - A versatile platform with incredible biotechnological potential

Lipases belong to α/β hydrolases that cause hydrolytic catalysis of triacylglycerols to release monoacylglycerols, diacylglycerols, and glycerol with free fatty acids. Lipases have a common active site that contains three amino acid residues in a conserved Gly-X-Ser-X-Gly motif: a nucleophilic serine residue, an acidic aspartic or glutamic acid residue, and a basic histidine residue. Lipase plays a significant role in numerous industrial and biotechnological processes, including paper, food, oleochemical and pharmaceutical applications. However, its instability and aqueous solubility make application expensive and relatively challenging. Immobilization has been considered as a promising approach to improve enzyme stability, reusability, and survival under extreme temperature and pH environments. Innumerable supporting material in the form of natural polymers and nanostructured materials is a crucial aspect in the procedure of lipase immobilization used to afford biocompatibility, stability in physio-chemical belongings, and profuse binding positions for enzymes. This review outlines the unique structural and functional properties of a large number of polymers and nanomaterials as robust support matrices for lipase immobilization. Given these supporting materials, the applications of immobilized lipases in different industries, such as biodiesel production, polymer synthesis, additives, detergent, textile, and food industry are also discussed.

Immobilization of enzymes on nanoinorganic support materials: An update

Despite the widespread use in various industries, enzyme's instability and non-reusability limit their applications which can be overcome by immobilization. The nature of the enzyme's support material and method of immobilization affect activity, stability, and kinetics properties of enzymes. Here, we report a comparative study of the effects of inorganic support materials on immobilized enzymes. Accordingly, immobilization of enzymes on nanoinorganic support materials significantly improved thermal and pH stability. Furthermore, immobilizations of enzymes on the materials mainly increased K_m values while decreased the V_max values of enzymes. Immobilized enzymes on nanoinorganic support materials showed the increase in ΔG value, and decrease in both ΔH and ΔS values. In contrast to weak physical adsorption immobilization, covalently-bound and multipoint-attached immobilized enzymes do not release from the support surface to contaminate the product and thus the cost is decreased while the product quality is increased. Nevertheless, nanomaterials can enter the environment and increase health and environmental risks and should be used cautiously. Altogether, it can be predicated that hybrid support materials, directed immobilization methods, site-directed mutagenesis, recombinant fusion protein technology, green nanomaterials and trailor-made supports will be used increasingly to produce more efficient immobilized industrial enzymes in near future.

Improved Catalytic Properties of Thermomyces lanuginosus Lipase Immobilized onto Newly Fabricated Polydopamine-Functionalized Magnetic Fe3O4 Nanoparticles

In this study, magnetic Fe3O4 nanoparticles coated with polydopamine possessing abundant amino groups (Fe3O4@PDA) were conveniently prepared, detailed, and characterized, and then firstly used as a supporting matrix for immobilizing Thermomyces lanuginosus lipase (Fe3O4@PDA@TLL). The effects of some crucial factors on the immobilization efficiency were investigated and the optimal protein loading and activity recovery were found to be 156.4 mg/g and 90.9%, respectively. Characterization studies revealed that Fe3O4@PDA@TLL displayed a broader pH and temperature adaptability as compared to the free TLL, which allows its use at wider ranges of reaction conditions. With regard to the stabilities, the immobilized TLL clearly displayed improved pH, thermal, and solvent tolerance stabilities compared to the free enzyme, suggesting that the biocompatible Fe3O4@PDA might be an outstanding material for immobilizing TLL and acting as alternative support for different enzymes.

Immobilized microbial lipases in the food industry: a systematic literature review

Several studies describe the immobilization of microbial lipases aiming to evaluate the mechanical/thermal stability of the support/enzyme system, the appropriate method for immobilization, acid and alkaline stability, tolerance to organic solvents and specificity of fatty acids. However, literature reviews focus on application of enzyme/support system in food technology remains scarce. This current systematic literature review aimed to identify, evaluate and interpret available and relevant researches addressing the type of support and immobilization techniques employed over lipases, in order to obtain products for food industry. Fourteen selected articles were used to structure the systematic review, in which the discussion was based on six main groups: (i) synthesis/enrichment of polyunsaturated fatty acids; (ii) synthesis of structured lipids; (iii) flavors and food coloring; (iv) additives, antioxidants and antimicrobials; (v) synthesis of phytosterol esters and (vi) synthesis of sugar esters. In general, the studies discussed the synthesis of the enzyme/support system and the characteristics: surface area, mass transfer resistance, activity, stability (pH and temperature), and recyclability. Each immobilization technique is applicable for a specific production, depending mainly on the sensitivity and cost of the process.

Enzymatic synthesis of short-chain flavor esters from natural sources using tailored magnetic biocatalysts

Immobilized lipases are excellent biocatalysts for the enzymatic synthesis of short- and medium-chain fatty esters used as food flavor compounds. Herein a new approach for a magnetic core-shell biocatalyst by immobilization of Candida antarctica B lipase is reported, coating single-core magnetic nanoparticles with an organic shell, preferably poly(benzofurane-co-arylacetic acid), followed by the covalent attachment of the enzyme and embedment of the primary biocatalyst in a silica layer. Although covalent and sol-gel immobilization were efficient on their own, their combination can ensure additional operational stability through multi-point linkages. Moreover, silanes holding glycidoxy groups, which can also form covalent linkages, have been successfully used as precursors for the silica coating layer. The structural, magnetic and morphological characteristics were assessed by TEM, SEM-EDX, X-ray photoelectron spectroscopy and vibrating sample magnetometry. The new biocatalysts demonstrated high catalytic efficiency in the solventless synthesis of isoamyl esters of natural carboxylic acids, also in multiple reaction cycles.

A New Route for Low Pressure and Temperature CWAO: A PtRu/MoS2_Hyper-Crosslinked Nanocomposite

PtRu/MoS₂ nanoparticles (NPs) (PtRu alloy partially coated by one-layer MoS₂ nanosheets) were prepared through a ‘wet chemistry’ approach. The obtained NPs were directly embedded, at 5 parts per hundred resin/rubber (phr) loading, in a poly (divinylbenzene-co-vinyl benzyl chloride) hyper-crosslinked (HCL) resin, synthesized via bulk polymerization of the resin precursors, followed by conventional FeCl₃ post-crosslinking. The obtained HCL nanocomposites were characterized to evaluate the effect of the NPs. It shows a high degree of crosslinking, a good dispersion of NPs and a surface area up to 1870 ± 20 m²/g. The catalytic activity of the HCL nanocomposite on phenol wet air oxidation was tested at low air pressure (P_air = 0.3 MPa) and temperature (T = 95 °C), and at different phenol concentrations. At the lower phenol concentration, the nanocomposite gives a total organic carbon (TOC) conversion of 97.1%, with a mineralization degree of 96.8%. At higher phenol concentrations, a phenol removal of 99.9%, after 420 min, was achieved, indicating a quasi-complete depletion of phenol, with a TOC conversion of 86.5%, corresponding to a mineralization degree of 84.2%. Catalyst fouling was evaluated, showing good reusability of the obtained nanocomposite.

Effect of the Immobilization Strategy on the Efficiency and Recyclability of the Versatile Lipase from Ophiostoma piceae

The recombinant lipase from Ophiostoma piceae OPEr has demonstrated to have catalytic properties superior to those of many commercial enzymes. Enzymatic crudes with OPEr were immobilized onto magnetite nanoparticles by hydrophobicity (SiMAG-Octyl) and by two procedures that involve covalent attachment of the protein (mCLEAs and AMNP-GA), giving three nanobiocatalysts with different specific activity in hydrolysis of p-nitrophenyl butyrate (pNPB) and good storage stability at 4 °C over a period of 4 months. Free OPEr and the different nanobiocatalysts were compared for the synthesis of butyl esters of volatile fatty acids C4 to C7 in reactions containing the same lipase activity. The esterification yields and the reaction rates obtained with AMNP-GA-OPEr were in general higher or similar to those observed for the free enzyme, the mCLEAs-OPEr, and the non-covalent preparation SiMAG-Octyl-OPEr. The time course of the esterification of the acids C4 to C6 catalyzed by AMNP-GA-OPEr was comparable. The synthesis of the C7 ester was slower but very efficient, admitting concentrations of heptanoic acid up to 1 M. The best 1-butanol: acid molar ratio was 2:1 for all the acids tested. Depending on the substrate, this covalent preparation of OPEr maintained 80–96% activity over 7 cycles, revealing its excellent properties, easy recovery and recycling, and its potential to catalyze the green synthesis of chemicals of industrial interest.

Self-Suspended Nanoparticles for N-Alkylation Reactions: A New Concept for Catalysis

The catalytic activity of snowman-like and core-shell Fe3O4/Au nanoparticles (NPs), obtained through a "wet chemistry" approach which directly restitutes nanocatalysts stable and highly active in the reaction medium, was tested towards N-alkylation reactions. The nanocatalysts were tested for the synthesis of secondary amines. The core-shell NPs, thanks to the surface properties, homogeneous dispersion and intimate connection with reagents in the catalyst medium, exhibited an excellent catalytic activity (e. g. >99 % yield and conversion of aniline in very short time and mild conditions). Owing to the magnetic part, the nanoparticles can be easily separated and reused, showing an almost stable activity after 10 cycles.

Active biocatalyst for biodiesel production from spent coffee ground

Physical adsorption preserving activity and support reusability was used to directly bond lipase from Thermomyces lanuginosus on citric acid (CA) modified Fe₃O₄/Au magnetic nanoparticles. A new faster approach has been used for CA ligand exchange, which ensures an high payload of stable enzyme. The immobilized lipase was tested for the biodiesel production from spent coffee ground in a solvent free system. It retains, after 60 days, more than 90% of its initial activity. Biodiesel yield of 51.7%, after 3 h of synthesis, which increases up to ∼100% after 24 h indicating an enzymatic fast kinetic, was measured. No significant decrease, during the first three cycles of use, of the lipase activity occurs. The biodiesel presents an ester content of 98.4 ± 0.23 in agreement with the EN14214. The iodine value of 76.67 (g iodine/100 g) is in agreement with the European standard.