Impact of ultrasonic power on the structure and emulsifying properties of whey protein isolate under various pH conditions

Investigating the impact of ultrasound on the structural, physicochemical, and emulsifying characteristics of Dioscorin: Insights from experimental data and molecular dynamics simulation

This study investigated the impact of ultrasound treatment on dioscorin, the primary storage protein found in yam tubers. Three key factors, namely ultrasound power, duration, and frequency, were focused on. The research revealed that ultrasound-induced cavitation effects disrupted non-covalent bonds, resulting in a reduction in α-helix and β-sheet contents, decreased thermal stability, and a decrease in the apparent hydrodynamic diameter (Dh) of dioscorin. Additionally, previously hidden amino acid groups within the molecule became exposed on its surface, resulting in increased surface hydrophobicity (Ho) and zeta-potential. Under specific ultrasound conditions (200 W, 25 kHz, 30 min), Dh decreased while Ho increased, facilitating the adsorption of dioscorin molecules onto the oil-water interface. Molecular dynamics (MD) simulations showed that at lower frequencies and pressures, the structural flexibility of dioscorin's main chain atoms increased, leading to more significant fluctuations between amino acid residues. This transformation improved dioscorin's emulsifying properties and its oil-water interface affinity.

Effects and improvement mechanisms of ultrasonic pretreatment on the quality of fermented skim milk

Fermented skim milk is an ideal food for consumers such as diabetic and obese patients, but its low-fat content affects its texture and viscosity. In this study, we developed an effective pretreatment method for fermented skim milk using low-frequency ultrasound (US), and investigated the molecular mechanism of the corresponding quality improvement. The skim milk samples were treated by optimal ultrasonication conditions (336 W power for 7 min at 3 °C), which improved the viscosity, water-holding capacity, sensory attributes, texture, and microstructure of fermented skim milk (P < 0.05). Further mechanistic analyses revealed that the US treatment enhanced the exposure of fluorescent amino acids within proteins, facilitating the cross-linking between casein and whey. The increased surface hydrophobicity of fermented milk indicates that the US treatment led to the exposure of hydrophobic amino acid residues inside proteins, contributing to the formation of a denser gel network; the average particle size of milk protein was reduced from 24.85 to 18.06 µm, which also contributed to the development of a softer curd texture. This work is the first attempt to explain the effect of a low-frequency ultrasound treatment on the quality of fermented skim milk and discuss the molecular mechanism of its improvement.

Investigating the impact of ultrasound-assisted treatment on the crafting of mulberry leaf protein and whey isolate complex: A comprehensive analysis of structure and functionality

Mulberry leaf protein (MLP) is a nutrient-rich protein, but its applicability is limited because of its poor solubility. To address this issue, this study combines MLP with whey protein isolates (WPI), known for the high nutritional value, and subsequently forms composite protein nanoparticles using the ultrasound-assisted pH shifting method. Microscopic observation and SDS-PAGE confirmed the binding between these two proteins. Fluorescence spectra and Fourier Transform infrared spectroscopy (FTIR) analysis supported the involvement of electrostatic interactions, hydrophobic attractions, and hydrogen bonding in the formation of stable complex nanoparticles. The interactions between the proteins became stronger after ultrasound-assisted pH-shifting treatment. Solubility, emulsification capacity, foaming, and antioxidant activity, among other indicators, demonstrate that the prepared composite nanoparticles exhibit favorable functional properties. The study successfully illustrates the creation of protein-based complex nanoparticles through the ultrasound-assisted pH shifting method, with potential applications in the delivery of bioactive compounds.

Construction of fatty acid-ovalbumin binary complexes to improve the water dispersibility, thermal/digestive stability and bioaccessibility of lutein: A comparative study of different fatty acids

Lipids are increasingly being incorporated into delivery systems due to their ability to facilitate intestinal absorption of lipid-soluble nutrients through molecular solubilization and micellization. In this work, self-assembled complexes of ovalbumin (OVA) and nine dietary fatty acids (FAs) were constructed to improve the processability and absorbability of lutein (LUT). Results showed that all FAs could form stable hydrophilic particles with OVA under the optimized ultrasound-coupled pH conditions. Fourier infrared spectroscopy and transmission electron microscopy analysis showed that these binary complexes effectively encapsulated LUT with an encapsulation rate > 90.0 %. Stability experiments showed that these complexes protected LUT well, which could improve thermal stability and in vitro digestive stability by 1.66-3.58-fold and 1.27-2.74-fold, respectively. Besides, the bioaccessibility of LUT was also enhanced by 7.16-24.99-fold. The chain length and saturation of FAs affected the stability and absorption of LUT. Therefore, these results provided some reference for the selection of FAs for efficient delivery of lipid-soluble nutrients.

Revealing the synergistic effect of hydration and pulsed ultrasound on the emulsifying properties of silkworm pupa protein and its stabilized emulsion

BACKGROUND

Silkworm (Bombyx moil L.) Pupa protein (SPP) is a high-quality insect protein and is considered a sustainable alternative source for traditional animal food protein. However, the utilization of SPP is limited because of its low solubility and emulsifying ability. In the present study, the synergistic effect of hydration and pulsed ultrasound on the physicochemical properties of SPP and SPP-stabilized Pickering emulsions was evaluated.

RESULTS

Pulsed ultrasound changed the particle size of SPP and its conformation. As the pulsed ultrasound increased from 0 s to 5 s, the α-helix and SS contents of SPP decreased, whereas the β-sheet and SH contents increased, which in turn improved its solubility and amphiphilicity. As a result, the SPP treated by a combination of 12 h of hydration and 3 s of ultrasound exhibited a contact angle of 74.95°, hydrophobicity of 904.83, EAI of 6.66 m2 g-1 and ESI of 190.69 min. Compared with the combination of 1 h of hydration and 5 s of ultrasound, the combination of 12 h of hydration and 3 s of ultrasound exerted more soluble and hydrophobic SPP, whereas the EAI and ESI of the samples were higher. Notably, the ultrasound-treated SPP can form a stable gel-like emulsion (oil fraction ranging from 70% to 80%).

CONCLUSION

The combination of hydration and ultrasound can effectively improve the physicochemical characteristics of SPP as well as its emulsion stability. Sufficient hydration is a cost-effective method for facilitating the modification of proteins by ultrasound treatment. © 2024 Society of Chemical Industry.

Effects of pH-shifting and ultrasound on the structural and emulsifying properties of peanut globulin fractions

This work investigated and compared the structural and emulsifying properties of peanut globulin fractions (conarachin and arachin) after ultrasonication (US) and pH2.5-shifting treatments, singly and in combination. Results showed that pH2.5-shifting was more effective in degrading peanut protein subunits and unfolding their structures than US treatment. Conarachin tended to aggregate during US and pH2.5-shifting treatments possibly due to higher free sulfhydryl content, while high molecular weight arachin tended to disaggregate during these treatments. pH2.5-shifting or US+pH2.5-shifting treatments significantly increased the surface hydrophobicity of conarachin (from 72 to 314) and arachin (from 336 to 888), which may be responsible for the enhancement of protein emulsifying activity. All treatments significantly improved the physical stability of arachin-stabilized emulsions with higher absolute potentials but lowered that of conarachin-stabilized emulsions. However, pH2.5-shifting or US+pH2.5-shifting treatments could improve the stability of conarachin-stabilized emulsions in the presence of salts.

Changes in physicochemical, structural and functional properties, and lysinoalanine formation during the unfolding and refolding of pH-shifted black soldier fly larvae albumin

The changes of physicochemical, structural and functional properties and the lysinoalanine (LAL) formation during the unfolding and refolding of black soldier fly larvae albumin (BSFLA) induced by acid/alkaline pH shift were explored. The results showed that acid/alkaline conditions induced unfolding of BSFLA structure, but also accompanied by the formation of some large aggregates due to the hydrophobic interactions, hydrogen bonds, and disulfide bonds. Compared with control or pH1.5 shift, pH12 shift treatment significantly increased the electrostatic repulsion, surface hydrophobicity, free sulfhydryl group, and deamidation reactions, but reduced the fluorescence intensity of BSFLA, and these change in protein conformation contributed to increase in solubility, emulsion activity, and emulsion stability. But the content of LAL in BSFLA was increased by 93.39 % by pH 12 shift treatment. In addition, pH1.5 shift modified BSFLA tended to form β-sheet structure through unfolding and refolding, resulting in the formation of aggregates with larger particle sizes, and reducing the solubility and the LAL content by 7.93 % and 65.53 %, respectively. SDS-PAGE profile showed that pH12/1.5 shifting did not cause irreversible denaturation of protein molecules. Therefore, pH12-shift is good way to improve the functional properties of BSFLA, but the content of LAL should be reduced to make it better used in food.

Ultrasound modification on milk fat globule membrane and soy lecithin to improve the physicochemical properties, microstructure and stability of mimicking human milk fat emulsions

Starting from the consideration of the structure of human milk fat globule (MFG), this study aimed to investigate the effects of ultrasonic treatment on milk fat globule membrane (MFGM) and soy lecithin (SL) complexes and their role in mimicking human MFG emulsions. Ultrasonic power significantly affected the structure of the MFGM-SL complex, further promoting the unfolding of the molecular structure of the protein, and then increased solubility and surface hydrophobicity. Furthermore, the microstructure of mimicking MFG emulsions without sonication was unevenly distributed, and the average droplet diameter was large. After ultrasonic treatment, the droplets of the emulsion were more uniformly dispersed, the particle size was smaller, and the emulsification properties and stability were improved to varying degrees. Especially when the ultrasonic power was 300 W, the mimicking MFG emulsion had the highest encapsulation rate and emulsion activity index and emulsion stability index were increased by 60.88 % and 117.74 %, respectively. From the microstructure, it was observed that the spherical droplets of the mimicking MFG emulsion after appropriate ultrasonic treatment remain well separated without obvious flocculation. This study can provide a reference for the screening of milk fat globules mimicking membrane materials and the further utilization and development of ultrasound in infant formula.

Potential inhibitory effect of highland barley protein hydrolysates on the formation of advanced glycation end-products (AGEs): A mechanism study

Advanced glycation end products (AGEs) can be caused during a glycoxidation reaction. This reaction is associated with complications of diabetes and the consequences of health problems. Therefore, we are exploring the prohibitory effect of highland barley protein hydrolysates (HBPHs) on AGE formation. Herein, first extracted the protein from highland barley with various pH conditions and then hydrolyzed using four different proteolytic enzymes (flavourzyme, trypsin, papain, pepsin) under different degrees of hydrolysis. We assessed three degrees of hydrolysates (lowest, middle, highest) of enzymes used to characterize the antioxidant activity and physicochemical properties. Among all the hydrolysates, flavourzyme-treated hydrolysates F-1, F-2, and F-3 indicated the high ability to scavenge DPPH (IC50 values of 0.97 %, 0.63 %, and 0.90 %), structural and functional properties. Finally, the inhibitory effect of the most active hydrolysates F-1, F-2, and F-3 against the AGEs formation was evaluated in multiple glucose-glycated bovine serum albumin (BSA) systems. Additionally, in a BSA system, F-3 exhibited the strong antiglycation activity, effectively suppressed the non-fluorescent AGE (CML), and the fructosamine level. Moreover, it decreased carbonyl compounds while also preventing the loss of thiol groups. Our results would be beneficial in the application of the food industry as a potential antiglycation agent for several chronic diseases.

Development of Novel Nanocarriers by Ultrasound and Ethanol-Assisted Soy Protein Isolate: Enhancing the Resistance of Lutein to Environmental Stress

The aim of this work was to investigate the effects of the processing sequence of ultrasound and ethanol on the physicochemical properties of soy protein isolate (SPI), which were further evaluated for the morphology and stability of SPI-lutein coassembled nanoparticles. The results showed that the sequence of ultrasound followed by ethanol treatment was the optimal one. The samples were subjected to ultrasonication followed by subunit disassembly and reassembly induced by 40% (v/v) ethanol, with the resulting molecular unfolding and subsequent aggregation being attributed to intramolecular hydrogen bonds. The recombined nanoparticles had smaller particle size (142.43 ± 2.91 nm) and turbidity (0.16 ± 0.01), and the exposure of more hydrophobic groups (H0 = 6221.00 ± 130.20) induced a shift of SPI structure toward a more ordered direction. The homogeneous and stable particle provided excellent stability for the loading of lutein. The bioaccessibility (from 25.48 ± 2.35 to 65.85 ± 1.78%) and release rate of lutein were modulated in gastrointestinal digestion experiments. Our discoveries provide a new perspective for the development of combined physicochemical modification of proteins as nanocarriers in functional foods.

Effect of high moisture extrusion on the structure and physicochemical properties of Tartary buckwheat protein and its in vitro digestion

Tartary buckwheat is rich in nutrients and its protein supports numerous biological functions. However, the digestibility of Tartary buckwheat protein (TBP) poses a significant limitation owing to its inherent structure. This study aimed to assess the impact of high moisture extrusion (HME, 60 % moisture content) on the structural and physicochemical attributes, as well as the in vitro digestibility of TBP. Our results indicated that TBP exhibited unfolded and amorphous microstructures after HME. The protein molecular weight of TBP decreased after HME, and a greater degradation was observed at 70 °C than 100 °C. In particular, HME at 70 °C caused an almost complete disappearance of bands near 35 kDa compared with HME at 100 °C. In addition, compared with native TBP (NTBP, 44.53 µmol/g protein), TBP subjected to HME at 70 °C showed a lower disulfide bond (SS) content (42.67 µmol/g protein), whereas TBP subjected to HME at 100 °C demonstrated a higher SS content (45.70 µmol/g protein). These changes endowed TBP with good solubility (from 55.96 % to 83.31 % at pH 7), foaming ability (20.00 %-28.57 %), and surface hydrophobicity (8.34-23.07). Furthermore, the emulsifying activity (EA) and in vitro digestibility are closely related to SS content. Notably, extruded TBP (ETBP) obtained at 70 °C exhibited higher EA and digestibility than NTBP, whereas ETBP obtained at 100 °C showed the opposite trend. Consequently, HME (especially at 70 °C) demonstrated significant potential as a processing technique for improving the functional and digestive properties of TBP.

Tunability of Pickering particle features of whey protein isolate via remodeling partial unfolding during ultrasonication-assisted complexation with chitosan/chitooligosaccharide

The potential of ultrasonication-driven molecular self-assembly of whey protein isolate (WPI) with chitosan (CS)/chitooligosaccharide (COS) to stabilize Pickering emulsions was examined, based on CS/COS ligands-induced partial unfolding in remodeling the Pickering particles features. Multi-spectral analysis suggested obvious changes in conformational structures of WPI due to interaction with CS/COS, with significantly higher unfolding degrees of WPI induced by COS. Non-covalent interactions were identified as the major forces for WPI-CS/COS conjugates. Ultrasonication enhanced electrostatic interaction between CS's -NH3 groups and WPI's -COO- groups which improved emulsification activity and storability of WPI-COS stabilized Pickering emulsion. This was attributed to increased surface hydrophobicity and decreased particle size compared to WPI-CS associated with differential unfolding degrees induced by different saccharide ligands. CLSM and SEM consistently observed smaller emulsion droplets in WPI-COS complexes than WPI-CS/COS particles tightly adsorbed at the oil-water interface. The electrostatic self-assembly of WPI with CS/COS greatly enhanced the encapsulation efficiency of quercetin than those stabilized by WPI alone and ultrasound further improved encapsulation efficiency. This corresponded well with the quantitative affinity parameters between quercetin and WPI-CS/COS complexes. This investigation revealed the great potential of glycan ligands-induced conformational transitions of extrinsic physical disruption in tuning Pickering particle features.

Proteosomes based on milk phospholipids and proteins to enhance the stability and bioaccessibility of β-carotene

Proteosomes (P) based on milk fat globule membrane's phospholipids (MPs), whey protein isolate (WPI) and sodium caseinate (CasNa) were developed by ultrasonication to encapsulate β-carotene. Entirely milk-ingredients based proteosomes (WPI-MPs-P and CasNa-MPs-P) revealed homogenous distribution with size diameters < 250 nm. WPI-MPs-P depicted positive ζ-potential values (+15.7 ± 0.5 mV), while CasNa-MPs-P demonstrated negative (-32.5 ± 3.4 mV) values of surface charge, respectively and hydrophilic nature of proteosomes was observed by measuring contact-angle (θ). AFM and SEM exhibited spherical to oval and slightly irregular morphology of nanocarriers. For various concentrations of β-carotene, the highest encapsulation efficiency of β-carotene was 90 ± 0.2% and 92 ± 0.8% in WPI-MPs-P and CasNa-MPs-P respectively. FTIR analyses confirmed the hydrophobic and electrostatic interactions-based encapsulation of β-carotene. Beneficial antioxidant-potential of β-carotene was retained after its encapsulation in the proteosomes. Proteosomes increased the digestive-stability (>50%) and bioaccessibility (>85%) of β-carotene. Thus, milk-ingredients based proteosomes offer a novel-strategy to develop functional dairy products to overcome widespread vitamin-A-deficiency.

Use of high-intensity ultrasound as a pre-treatment for complex coacervation from whey protein isolate and iota-carrageenan

The aim of this work was to evaluate the influence of high intensity ultrasound (HIUS) treatment on the molecular conformation of whey protein isolated (WPI) as a previous step for complex coacervation with iota carrageenan (IC) and its effect on the surface functional properties of complex coacervates (CC). Both biopolymers were hydrated (1% w/w) separately. A WPI suspension was treated with an ultrasonic bath (40 kHz, 600 W, 30 and 60 min, 100% amplitude). A non-sonicated protein was used as a control. Coacervation was achieved by mixing WPI and IC dispersions (10 min). FTIR-ATR analysis (400-4000 cm-1) detected changes after sonication on WPI secondary structure (1600-1700 cm-1), electrostatic interaction between WPI and IC by electronegative IC charged groups like sulfate (1200-1260 cm-1), anhydrous oxygen of the 3.6 anhydro-D-galactose (940-1066 cm-1) and the electropositive regions of WPI. Rheology results showed pseudoplastic behavior of both IC and WPI-IC with a significant change in viscosity level. Further, HIUS treatment had a positive effect on the emulsifying properties of the WPI-IC coacervates, increasing the time foaming (30 min) and emulsion stability (1 month) percentage. HIUS and complex coacervation proved to be an efficient tool to improve the surface functional properties of WPI.

Non-thermal techniques as an approach to modify the structure of milk proteins and improve their functionalities: a review of novel preparation

BACKGROUND

Milk proteins (MPs) have been widely used in the food industry due to their excellent functionalities. However, MPs are thermal-unstable substances and their functional properties are easily affected by heat treatment. Emerging non-thermal approaches (i.e., high-pressure homogenization (HPH), ultrasound (US), pulsed electric field (PEF)) have been increasingly popular. A detailed understanding of these approaches' impacts on the structure and functionalities of MPs can provide theoretical guidance for further development to accelerate their industrialization.

SCOPE AND APPROACH

This review assesses the mechanisms of HPH, US and PEF technologies on the structure and functionalities of MPs from molecular, mesoscopic and macroscopic levels, elucidates the modifications of MPs by these theologies combined with other methods, and further discusses their existing issues and the development in the food filed.

KEY FINDINGS AND CONCLUSIONS

The structure of MPs changed after HPH, US and PEF treatment, affecting their functionalities. The changes in these properties of MPs are related to treated-parameters of used-technologies, the concentration of MPs, as well as molecular properties. Additionally, these technologies combined with other methods could obtain some outstanding functional properties for MPs. If properly managed, these theologies can be tailored for manufacturing superior functional MPs for various processing fields.

Construction and characterization of Pickering emulsions stabilized by soy protein hydrolysate microgel particles and quercetin-loaded performance in vitro digestion

Food-grade Pickering emulsions stabilized by protein microgel particles have received increasing attentions owing to their potential applications in the food industry. Herein, soy protein hydrolysate microgel particles (SPHMs) produced at various pH (3, 5, 7, and 9) with and without ultrasonication were used to stabilize Pickering emulsions. Compared with those prepared using ultrasonication at pH 3-7, SPHMs prepared using ultrasonication at pH 9 showed excellent amphiphility at the oil-water interface and a superior ability to reduce interfacial tension. The Pickering emulsion stabilized by the latter SPHMs displayed a small particle size and a high net charge on the droplet surface, formed a dense honeycomb network interfacial layer with high viscoelasticity and adsorbed protein content, and experienced no visually detectable creaming during storage for 21 days, i.e., exhibited optimum colloidal stability. Furthermore, the above emulsion featured a quercetin encapsulation efficiency of 89.45 % and was capable of sustainable release, achieving a low free fatty acid release efficiency of 61 % and a relatively high quercetin bioaccessibility of 65 % in in vitro simulated digestion experiments. Thus, this work inspires the use of SPHMs in emulsion-based functional foods.

Effect of high-intensity ultrasonic time on structural, mechanical, and physicochemical properties of β-conglycinin (7S)- Transglutaminase (TGase) composite edible films

The β-conglycinin (7S) was pre-treated with high-intensity ultrasonic (HIU) and subsequently formed into composite edible films with the transglutaminase (TGase) method. Effects of HIU pretreatment time (0, 5, 10, 15, and 20 min) on the conformation of 7S and structural and application properties of 7S-TGase films were evaluated. The analysis of 7S conformation results revealed that HIU pretreatment for 0-10 min significantly dissociated the 7S, exposed internal hydrophobic groups of protein, increased its intermolecular hydrogen bonds, and altered the protein secondary and tertiary structure. The structural properties of films were evaluated by SEM, XRD, and ATR-FTIR. SEM showed that HIU reduced film wrinkles and cracks and improved unevenness. XRD and ATR-FTIR indicated that the film obtained an enlarged crystallinity, and the amide I and amide II regions of films were peak-shifted which is usually associated with the formation of covalent bonds. Notably, analysis of intermolecular force showed that HIU facilitated the formation of hydrogen bonds, hydrophobic interactions, and ε-(γ-glutamyl) lysine bonds in 7S-TGase films. The above structural changes in 7S and films were beneficial for the application properties of films. Results indicated that 10 min HIU pretreatment effectively improved the mechanical properties and water resistance, reduced water vapor permeability and oxygen permeability, and decreased the opacity of 7S-TGase films. However, the color of the film was not affected by the HIU, with an overall bright and yellowish color.

Effects of ultrasound on the immunoreactivity of amandin, an allergen in apricot kernels during debitterizing

In this paper, an investigation was conducted on the effects of ultrasound time, power and temperatures on the immunoreactivity of the allergenic amandin in apricot kernels by western blotting analysis during the ultrasonically accelerated debitterizing. And its influencing mechanism on the structure of amandin was also analyzed by SDS-PAGE, circular dichroism spectrum, extrinsic fluorescence spectrum, surface hydrophobicity and zeta potential determination, respectively. The results indicate that ultrasound could significantly reduce the immunoreactivity of amandin during ultrasonically accelerated debitterizing, and the optimal ultrasound condition was 60 min, 300 W, 55 °C and 59 kHz and decreased the immunoreactivity to 15.61%, which might be attributed to the changes of the protein subunits, secondary and tertiary structure, and molecular aggregation state induced by ultrasound. In a word, ultrasound could not only accelerate debitterizing, but also significantly decrease the immunoreactivity of apricot kernels, which proved the feasibility of ultrasound in practical processing of apricot kernels.

Electrospray-Assisted Fabrication of Dextran-Whey Protein Isolation Microcapsules for the Encapsulation of Selenium-Enriched Peptide

Selenium-enriched peptide (SP, selenopeptide) is an excellent organic selenium supplement that has attracted increasing attention due to its superior physiological effects. In this study, dextran-whey protein isolation-SP (DX-WPI-SP) microcapsules were fabricated via high-voltage electrospraying technology. The results of preparation process optimization showed that the optimized preparation process parameters were 6% DX (w/v), feeding rate Q = 1 mL/h, voltage U = 15 kV, and receiving distance H = 15 cm. When the content of WPI (w/v) was 4-8%, the average diameter of the as-prepared microcapsules was no more than 45 μm, and the loading rate for SP ranged from ~46% to ~37%. The DX-WPI-SP microcapsules displayed excellent antioxidant capacity. The thermal stability of the microencapsulated SP was improved, which was attributed to the protective effects of the wall materials for SP. The release performance was investigated to disclose the sustained-release capacity of the carrier under different pH values and an in-vitro-simulated digestion environment. The digested microcapsule solution showed negligible influence on the cellular cytotoxicity of Caco-2 cells. Overall, our work provides a facile strategy of electrospraying microcapsules for the functional encapsulation of SP and witnesses a broad prospect that the DX-WPI-SP microcapsules can exhibit great potential in the food processing field.

Towards understanding the interaction between ultrasound-pretreated β-lactoglobulin monomer with resveratrol

Increasingly, studies are using ultrasound to elevate the functional properties of proteins, so the interaction between phenolic compounds and proteins induced by ultrasound needs to be further understood. β-Lactoglobulin (β-LG) at pH 8.1, which exists mainly as monomers, was ultrasound treated at 20 kHz ultrasonic intensity and 30% amplitude for 0-5 min and subsequently interacted with resveratrol. Fluorescence data showed that ultrasound pretreatment improved binding constant (K_a ) from (1.62 ± 0.45) × 10⁵ to (9.43 ± 0.55) × 10⁵  M^-1 and binding number from 1.13 ± 0.09 to 1.28 ± 0.11 in a static quenching mode. Fluorescence resonance energy transfer (FRET) analysis indicated that resveratrol bound to the surface hydrophobic pocket of native and treated proteins with no obvious changes in energy transfer efficiency (E) and Föster's distance (r). Thermodynamic parameters indicated that ultrasonication shifted the main driving force from the hydrophobic force for native and 1-min treated β-LG to van der Waals forces and hydrogen bonding for both 3-min and 5-min treated proteins. Ultrasonication and resveratrol addition generated significant differences in surface hydrophobicity and the surface charge of the protein (P < 0.05), whereas they had little influence on the secondary structure of β-LG. Compared with the native β-LG/resveratrol complex, ultrasound-treated protein complexes showed significantly stronger 2,2-azinobis(3-ethylbenzothiazoline-6-sulfonic acid (ABTS) scavenging capacity (P < 0.05), and kept relatively stable after 180-min irradiation. Data provided by this study can lead to a better comprehension of the structure and molecular events occurring during the complexing process between an ultrasound-pretreated protein with polyphenol.

Plant Protein versus Dairy Proteins: A pH-Dependency Investigation on Their Structure and Functional Properties

Plant proteins are constantly gaining attention as potential substitutes for dairy proteins, due to their suitable functionality and nutritional value. This study was designed to compare the structural and functional responses of different plant protein isolates (soy, pea, lentil, and chickpea) with two commonly used dairy protein (whey protein isolates and sodium caseinate) under different pH treatments (pH 3.0, 5.0, 7.0, and 9.0). The results showed that pH had a different alteration on the structural, surface properties and functional properties of plant and dairy proteins. Plant protein generally possessed a darker color, lower solubility, emulsifying properties, and foaming capacity, whereas their foaming stability and water holding capacity were higher than those of dairy proteins. Soy protein isolates were characterized by its comparable proportion of β-turn and random coils, zeta-potential, emulsifying (30.37 m²/g), and water-holding capacity (9.03 g/g) at alkaline conditions and chickpea protein isolates showed good oil-holding capacity (3.33 g/g at pH 9) among plant proteins. Further analysis confirmed that pH had a greater influence on the structural and functional properties of proteins as compared to protein sources, particularly at acidic conditions. Overall, this study might help processors select the appropriate plant protein as dairy alternatives for their target application in plant-based food products.

Ultrasound improves the physicochemical and foam properties of whey protein microgel

Whey protein microgel (WPM) is an emerging multifunctional protein particle and methods to improve its functional properties are continuously being explored. We developed a method to prepare WPM by heat-induced self-assembly under different ultrasound power (160, 320, 480, and 640 W/cm²) and characterized the particle size, surface hydrophobicity, disulfide bond, viscosity, and foam properties of WPM. Ultrasound increased the particle size of WPM-160 W to 31 μm. However, the increase in ultrasound power gradually reduced the average particle size of samples. The intrinsic fluorescence spectrum showed that ultrasound unfolded the structure of whey protein and exposed more hydrophobic groups, which increased the surface hydrophobicity of WPM. In addition, infrared spectroscopy suggested ultrasound decreased the α-helix content of WPM, implying an increase in the flexibility of protein molecules. The disulfide bond of WPM was broken by ultrasound, and the content of the-SH group increased correspondingly. The rheology indicated that the apparent viscosity decreased with the increase of ultrasonic power. Compared with the control, the ultrasonicated WPM displayed higher foam ability. Ultrasound improved the foam stability of WPM-160 W but destroyed the foam stability of other samples. These results suggest that proper ultrasound treatment can improve the physicochemical and foam properties of WPM.

Protection of Mono and Polyunsaturated Fatty Acids from Grapeseed Oil by Spray Drying Using Green Biopolymers as Wall Material

One of the most common ways to protect oils is microencapsulation, which includes the use of encapsulating agents. Due to the environmental problems facing humanity, this study seeks to combine green biopolymers (microcrystalline cellulose and whey protein isolate) that function as encapsulating agents for grapeseed oil. Grapeseed oil that is obtained from agro-industrial waste has shown health benefits, including cardioprotective, anticancer, antimicrobial, and anti-inflammatory properties. These health benefits have been mainly associated with monounsaturated (MUFA) and polyunsaturated (PUFA) fatty acids. In this sense, it has been observed that grapeseed oil can be easily modified by environmental factors such as oxygen, high temperatures, and light, showing the instability and easy degradation of grapeseed oil. In this study, grapeseed oil was encapsulated using the spray-drying technique to conserve its lipidic profile. Powder recovery of the grapeseed oil microcapsules ranged from 65% to 70%. The encapsulation efficiency of the microcapsules varied between 80% and 85%. The FTIR analysis showed chemical interactions that demonstrate chemisorption between the grapeseed oil and the encapsulating material, while the SEM micrographs showed a correct encapsulation in a spherical shape. Gas chromatography showed that the lipid profile of grapeseed oil is preserved thanks to microencapsulation. Release tests showed 80% desorption within the first three hours at pH 5.8. Overall, whey protein and microcrystalline cellulose could be used as a wall material to protect grapeseed oil with the potential application of controlled delivery of fatty acids microcapsules.

Molecular structural modification of β-conglycinin using pH-shifting with ultrasound to improve emulsifying properties and stability

This present work underlines the effect of pH-shifting at pH 2 and pH 12 individually or combined with ultrasound treatment to modify the molecular structure of β-conglycinin (7S) on its emulsifying properties and stability. Fourier transform infrared (FTIR) spectroscopy and intrinsic fluorescence spectroscopy showed that pH-shifting improves the molecular structure of 7S, while ultrasound further promotes structural changes. In particular, the pH-shifting at pH 12 combined with ultrasound treatment (U-7S-12) resulted in more significant changes than the pH-shifting at pH 2 combined with ultrasound (U-7S-2). U-7S-12 showed a significant reduction in protein particle size from 152 to 34.77 nm and a relatively smooth protein surface compared to 7S. The protein had the highest surface hydrophobicity and flexibility at 81,560.0 and 0.45, respectively, and the free sulfhydryl content from 1.57 to 2.02 μmol/g. In addition, we characterized the emulsions prepared after 7S treatment. The single or combined treatment increased the interfacial protein adsorption of the samples, which showed lower viscosity and shear stress compared to 7S. The U-7S-12 emulsion exhibited the highest emulsifying properties and was more stable than other emulsions under creaming, heating, and freeze-thaw conditions. In summary, the concerted action of pH-shifting and ultrasound can modify the structure, and combined alkaline pH-shifting and ultrasound treatment can further improve the emulsifying properties and stability of 7S.

Phenolic modification of myofibrillar protein enhanced by ultrasound: The structure of phenol matters

Phenolic modification of myofibrillar protein (MPN) is an essential technology in meat processing. This paper investigated the grafting reaction of three structurally relevant polyphenols (PPs), epigallocatechin-3-gallate (EGCG), epigallocatechin (EGC), epicatechin (EC), and MPN, in a conventional alkaline reaction and ultrasound (UT)-assisted oxidation system. EC triggered the production of more hydroxyl radicals at an equal molar concentration, resulting in a noticeable improvement of the final grafting effect. Moreover, pronounced changes in pore area on the microscopic scale was observed in MPN-EGCG, which was ascribed to the unique chemical structure of EGCG. Additionally, the antioxidant activities of the UT-assisted EGCG group were 133.89% and 103.10% higher than those of the single MPN group (PP0) and pure EGCG group, respectively. These results emphasized the importance of the chemical structure of PPs in the process of different grafting reactions.

Modifying the physicochemical properties, solubility and foaming capacity of milk proteins by ultrasound-assisted alkaline pH-shifting treatment

This study investigated the effects of different treatment of alkaline pH-shifting on milk protein concentrate (MPC), micellar casein concentrate (MCC) and whey protein isolate (WPI) assisted by the same ultrasound conditions, including changes in the physicochemical properties, solubility and foaming capacity. The solubility of milk proteins had a significant increase with gradual enhancement of ultrasound-assisted alkaline pH-shifting (p < 0.05), especially for MCC up to 99.50 %. Also, treatment made a significant decline in the particle size of MPC and MCC, as well as the turbidity of the proteins (p < 0.05). The foaming capacity of MPC, MCC, and WPI was all improved, especially at pH 11, and at this pH, the milk protein also showed the highest surface hydrophobicity. The best foaming capacity at pH 11 was the result of the combined effect of particle size, potential, protein conformation, solubility, and surface hydrophobicity. In conclusion, ultrasound-assisted pH-shifting treatment was found to be effective in improving the physicochemical properties and solubility and foaming capacity of milk proteins, especially MCC, with promising application prospect in food industry.

Effect of ball milling-assisted glycosylation modification on the structure and foaming property of egg white protein

The effect of different glycosylation degrees on molecular structure and foaming property of egg white protein (EWP) was investigated using ball milling-assisted glycosylation. The results showed the foaming ability (FA) and foam stability (FS) of EWP improved when the degree of glycosylation was increased. In particular, FA of ball milling-assisted glycosylation of EWP enhanced by 39.9% and 28.8%, and the FS increased by 28.7% and 24.0% compared with EWP and ball milling egg white protein (BE) at 150 min of reaction. Sodium dodecyl sulphate polyacrylamide gel electrophoresis (SDS-PAGE) analysis could reflect the grafting degree of EWP and glucose molecules from the side. When EWP was fully grafted with glucose, endogenous fluorescence and free sulfhydryl groups indicated that tertiary structure of EWP was depolymerized, and Fourier transform infrared spectroscopy showed the secondary structure tended to change from order to disorder. The results of this study indicated that ball milling-assisted glycosylation modification was a practical method to improve the foaming property of EWP. PRACTICAL APPLICATION: EWP has great FA and FS, making it indispensable in the baking industry. In this study, ball milling-assisted glycosylation was used to improve the foaming property of EWP, and the molecular structure of EWP with different degrees of glycosylation was fully resolved. The results demonstrated that ball milling, as a physical pretreatment, can fully unfold the structure of EWP. When sugar molecules were fully grafted, the particle size of EWP reduced, solubility increased, and the stability of system improved, thus enhancing the foaming property of EWP. The results can provide theoretical basis for improving the foaming property of EWP and provide a reference value for its industrial application.

Comparative structural and emulsifying properties of ultrasound-treated pea (Pisum sativum L.) protein isolate and the legumin and vicilin fractions

The structural properties, interfacial behavior, and emulsifying ability of ultrasound-treated pea protein isolate (PPI) and the legumin (11S) and vicilin (7S) globulin fractions prepared with a salt-solubilization procedure were investigated. Of the three protein groups, PPI was strongly responsive to ultrasound perturbation (20 kHz, 57-60 W·cm-2) showing the greatest solubility increase, particle size reduction, structure destabilization, and conformational change. Similar but less remarkable effects were observed on 11S globulins; 7S proteins, already highly soluble (>99%), were generally less sensitive to ultrasound. The ultrasound treatment significantly improved emulsifying activity, which resulted in greater emulsifying capacity and stronger interfacial adsorption for all protein samples. PPI exhibited the higher activity increase (70.8%) compared to approximately 30% for 11S and 7S. For both control and ultrasound treated proteins, the emulsifying capacity was in the order of 7S > 11S > PPI, inversely related to the trend of protein loading at the interface, indicating efficiency differences. The latter was attributed to emulsion clusters formed through protein-protein interaction in PPI and 11S emulsions which were visibly absent in 7S emulsions.

Advances in Protein-Based Nanocarriers of Bioactive Compounds: From Microscopic Molecular Principles to Macroscopical Structural and Functional Attributes

Many proteins can be used to fabricate nanocarriers for encapsulation, protection, and controlled release of nutraceuticals. This review examined the protein-based nanocarriers from microscopic molecular characteristics to the macroscopical structural and functional attributes. Structural, physical, and chemical properties of protein-based nanocarriers were introduced in detail. The spatial size, shape, water dispersibility, colloidal stability, etc. of protein-based nanocarriers were largely determined by the molecular physicochemical principles of protein. Different preparative techniques, including antisolvent precipitation, pH-driven, electrospray, and gelation methods, among others, can be used to fabricate different protein-based nanocarriers. Various modifications based on physical, chemical, and enzymatic approaches can be used to improve the functional performance of these nanocarriers. Protein is a natural resource with a wide range of sources, including plant, animal, and microbial, which are usually used to fabricate the nanocarriers. Protein-based nanocarriers have many advantages in aid of the application of bioactive ingredients to the medical, food, and cosmetic industries.

Gelling Characteristics of Emulsions Prepared with Modified Whey Protein by Multiple-Frequency Divergent Ultrasound at Different Ultrasonic Power and Frequency Mode

The effect of ultrasonic frequency mode (mono, dual and tri-frequency) and ultrasonic power (0–300 W) on structural properties (intrinsic fluorescence and sulfhydryl content) of whey protein was studied. Emulsions prepared with modified whey protein were used to form the heat-set gels, and the properties of whey protein emulsion gels (WPEG) and their digestion were investigated. The textural and rheological properties of WPEG prepared using whey protein pretreated by mono and dual-frequency ultrasound at the power between 180–240 W were enhanced, while those of WPEG prepared with whey protein pretreated by triple-frequency above the power of 180 W were declined. WPEG prepared using whey protein pretreated by dual-frequency ultrasound (DFU) with the power of 240 W had the highest hardness and storage modulus which were 3.07 and 1.41 times higher than the control. The microstructure of WPEG prepared using DFU pretreated whey protein showed homogeneous and denser networks than those of the control according to the results of confocal laser scanning microscope (CLSM). The modification in the microstructure and properties of the WPEG prepared using DFU pretreated whey protein delayed the protein disintegration during the first 30 min of gastric digestion when compared with control. Whereas the release rate of free amino group of the WPEG prepared using whey protein modified by ultrasonic pretreatment increased during the intestinal phase when compared with that of control. The results indicated that using dual-frequency ultrasound to modify whey protein is more efficient in improving the properties of WPEG, and ultrasonic power should be considered during the application of ultrasound pretreatment in producing protein gels. The fine network of WPEG prepared with whey protein pretreated by ultrasound resulted in better hardness and storage modulus. Partially unfolding of the protein induced by ultrasound pretreatment might make the whey protein more susceptible to the digestive enzyme. Our results could provide new insights for using ultrasound as the potential processing tool on designing specific protein emulsion gels as the delivery system for nutrients.

Study on Extraction and Antioxidant Activity of Flavonoids from Hemerocallis fulva (Daylily) Leaves

Hemerocallis fulva is a medical and edible plant. In this study, we optimized the ultrasound-assisted extraction (UAE) process of extracting flavonoids from Hemerocallis fulva leaves by single-factor experiments and response surface methodology (RSM). The optimum extraction conditions generating the maximal total flavonoids content was as follows: 70.6% ethanol concentration; 43.9:1 mL/g solvent to sample ratio; 61.7 °C extraction temperature. Under the optimized extraction conditions, the total flavonoid content (TFC) in eight Hemerocallis fulva varieties were determined, and H. fulva (L.) L. var. kwanso Regel had the highest TFC. The cytotoxicity of the extract was studied using the Cell Counting Kit-8 (CCK-8 assay). When the concentration was less than 1.25 mg/mL, the extract had no significant cytotoxicity to HaCaT cells. The antioxidant activity was measured via chemical antioxidant activity methods in vitro and via cellular antioxidant activity methods. The results indicated that the extract had a strong ABTS and •OH radical scavenging activity. Additionally, the extract had an excellent protective effect against H2O2-induced oxidative damage at a concentration of 1.25 mg/mL, which could effectively reduce the level of ROS to 106.681 ± 9.733% (p < 0.001), compared with the 163.995 ± 6.308% of the H2O2 group. We identified five flavonoids in the extracts using high-performance liquid chromatography (HPLC). Infrared spectroscopy indicated that the extract contained the structure of flavonoids. The results showed that the extract of Hemerocallis fulva leaves had excellent biocompatibility and antioxidant activity, and could be used as a cheap and potential source of antioxidants in the food, cosmetics, and medicine industries.

Influence of high-intensity ultrasound on physicochemical and functional properties of a guamuchil Pithecellobium dulce (Roxb.) seed protein isolate

In this study, the influence of ultrasound on the physicochemical and functional properties of guamuchil seed protein isolate (GSPI) was investigated. The GSPI was prepared by alkaline extraction and isoelectric precipitation method followed by treating with ethanol (95%), from defatted guamuchil seed flour. GSPI suspensions (10%) were sonicated with a probe (20 kHz) at 3 power levels (200 W, 400 W, 600 W) for 15 and 30 min, in addition, to control treatment without ultrasound. Moisture content, water activity, bulk and compact densities and the L*, a* and b* color parameters of the GSPI decreased due to the ultrasound. Glutelin (61.1%) was the main protein fraction in GSPI. Results through Fourier transform infrared and fluorescence spectroscopy showed that ultrasound modified the secondary and tertiary protein structures of GSPI, which increased the surface hydrophobicity, molecular flexibility and in vitro digestibility of GSPI proteins by up to 114.8%, 57.3% and 12.5%, respectively. In addition, maximum reductions of 11.9% in particle size and 55.2% in turbidity of GSPI suspensions, as well as larger and more porous aggregates in GSPI lyophilized powders were observed by ultrasound impact. These structural and physicochemical changes had an improvement of up to 115.5% in solubility, 39.8% in oil absorption capacity, while the increases for emulsifying, foaming, gelling, flow and cohesion properties of GSPI were 87.4%, 74.2%, 40.0%, 44.4%, and 8.9%, respectively. The amelioration of the functional properties of GSPI by ultrasound could represent an alternative for its possible use as a food ingredient in industry.

Comparative study of the effects of ultrasonic power on the structure and functional properties of gliadin in wheat and green wheat

The impact of different ultrasonic power on the structure and functional properties of wheat gliadin (WG) and green wheat gliadin (GG) was investigated and compared. Ultrasound had no obvious effect on subunit composition and bands of WG and GG, and there were more small molecular weight bands in GG. The results of Fourier transform-infrared spectroscopy, intrinsic fluorescence spectroscopy, and scanning electron microscopy analyses demonstrated that ultrasonic treatment had a significant effect on the structure of WG and GG, inducing the transformation from order structure to disorder structure. The dispersion and uniformity were better at 400 and 300 W, respectively. Under proper ultrasonic treatment, the particle size of WG and GG was significantly reduced, and the free sulfhydryl groups and surface hydrophobicity were significantly increased (p < 0.05). Furthermore, the functional properties of WG and GG such as solubility, emulsification properties, water holding and oil holding properties, thermal stability, and digestibility were enhanced. The better functional properties of WG and GG were obtained at 400 and 300 W, respectively. These results indicated that ultrasonic treatment with appropriate power was a valuable method for improving functional characteristics of WG and GG. PRACTICAL APPLICATION: Ultrasonic treatment could cause structural changes of wheat gliadin (WG) and green wheat gliadin (GG), and their functional properties are improved under appropriate power. This study compares the effects of ultrasound on WG and GG, and the results will provide theoretical guidance for the development of GG in the food industry.

Effects of ultrasound on the techno-functional properties of milk proteins: A systematic review

Techno-functional properties of proteins, including foaming capacity, water holding capacity, solubility, emulsifying properties, and gelling formation, are known to play an important role in food processing technologies and be considered significant contributors in the development of new food products. In recent years, research has proven that ultra-sonication can influence the techno-functional properties of proteins through modification of their molecular structure. In this study, Scopus, Web of Science, PubMed, Google Scholar, ProQuest, and FSTA (Food Science and Technology Abstracts) databases were searched to find all related articles from 2000 to 2021. The results showed that the improving effects of ultrasound on each of the functional properties of proteins is entirely dependent on the ultrasound conditions and the type of ultrasound-treated protein. The results of functional parameters of milk proteins also showed that ultrasound could modify these properties. However, further studies are required to reach conclusive results that permit the employment of ultrasound to improve the techno-functional properties of milk proteins.

Modification of functional properties of perilla protein isolate by high-intensity ultrasonic treatment and the stability of o/w emulsion

This study investigated the effects of ultrasonic treatment on the structural characteristics and functional properties of perilla protein isolate (PPI). Besides, the performance of the emulsions stabilized by ultrasonic-treated PPI was analyzed, aiming at exploring the potential mechanism of ultrasonic technology to improve emulsion stability. Results showed that ultrasonic treatment reduced the particle size, induced the exposure of hydrophobic groups and changes in the secondary structure and tertiary conformation of PPI. However, the molecular weight and the crystalline regions were remained unchanged. Apart from this, ultrasonic treatment improved the solubility, water/oil holding capacity, foaming and emulsifying capacity of PPI. Furthermore, the emulsions prepared by ultrasonic-treated PPI possessed the highest stability, which might be due to the smaller droplets size and reduced droplets attraction by higher proportion of interfacial adsorbed protein. This findings will provide a new insight into the application of ultrasonic to improve the stability of PPI-stabilized emulsions.