Star polymers: Advances in biomedical applications

Miktoarm Star-polypept(o)ide-Based Polyion Complex Micelles for the Delivery of Large Nucleic Acids

Miktoarm star polymers exhibit a captivating range of physicochemical properties, setting them apart from their linear counterparts. This study devised a synthetic pathway to synthesize cationic miktoarm stars utilizing polypept(o)ides (PeptoMiktoStars), comprising 3 or 6 polysarcosine (pSar) arms (AB3×100, AB6×50, overall 300) for shielding and a cross-linkable poly(S-ethylsulfonyl-l-homocysteine) (pHcy(SO2Et)20) block and a poly(l-lysine) ((pLys)20) block for nucleic acid complexation. Precise control over the DPn and narrow molecular weight distributions (D̵ ≈ 1.2) were achieved for both structures. Both PeptoMiktoStars efficiently complexed mRNA and pDNA into polyion complex micelles (PICMs). AB6-PICMs provided modest (mRNA) to high (pDNA) stability against glutathione and heparin sulfate (HS), while even cross-linked AB3-PICMs were susceptible to HS. All PICMs delivered pDNA and mRNA into D1 cells (over 80%) and Jurkat T cells (over 50%) in vitro. Despite payload- and cell-dependency, AB3 showed overall higher transfection efficiency, while AB6 demonstrated better shielding and enhanced stability.

Star-Like Polypeptides as Simplified Analogues of Horseradish Peroxidase (HRP) Metalloenzymes

Peroxidases, like horseradish peroxidase (HRP), are heme metalloenzymes that are powerful biocatalysts for various oxidation reactions. By using simple grafting-from approach, ring-opening polymerization (ROP), and manganese porphyrins, star-shaped polypeptides analogues of HRP capable of catalyzing oxidation reactions with H2O2 is successfully prepared. Like their protein model, these simplified analogues show interesting Michaelis-Menten constant (KM) in the mM range for the oxidant. Interestingly, the polymer structures are more resistant to denaturation (heat, proteolysis and oxidant concentration) than HRP, opening up interesting prospects for their use in catalysis or in biosensing devices.

Assembly of polysaccharide-based polymer brush for supramolecular hydrogel dressing

Extracted from Platycodon grandiflorum, platycodon grandiflorum polysaccharides (PGPs) with diverse biological functions have been extensively employed for modification and fabrication of hydrogels for biomedical applications, such as wound dressings. However, since the lack of effective structural design, the reported polysaccharide-based hydrogel dressings are still suffered from structural failures and limited bio-functionality. Herein, we demonstrate a facile and general strategy to fabricate a supramolecular hydrogel composed of PGP-based polymer brush as building blocks combined with a Ca2+-mediated self-assembly process. The specific polymer brush with high branch functionality was achieved with polyacrylamide arms evenly grown on the PGP (grafting efficiency as high as 80 %) with series of chemical modifications. With above structural merits, the resulting hydrogel with densely crosslinked polymer brush featured enhanced mechanical strength as well as self-healing, and shear-thinning behaviors. Further biocompatible investigation indicated the as-prepared hydrogels with admirable performances in self-adhesion (adhesive strength of 16.7-79.5 kPa), a pH-responsive swelling ratio as high as 44 at pH 5.4, and pH-responsive degradation. They also showed antioxidant capacity by scavenging DPPH activity of nearly 80 % in 20 min, hemocompatibility, cell viability and cell migration. Impressively, the PGP-based polymer brush hydrogel served as a wound dressing revealed significant acceleration on wound closure.

Zinc Phthalocyanine Core-First Star Polymers Through Nitroxide Mediated Polymerization and Nitroxide Exchange Reaction

Nitroxide-mediated polymerization (NMP) and nitroxide exchange reaction (NER) are very efficient methodologies that require only suitable alkoxyamine derivatives and create different polymeric architectures in a controlled manner. Herein, the synthesis of star polymers containing TEMPO-substituted symmetric zinc phthalocyanine (ZnPc) is presented via NMP and NER. Moreover, linear polymer formation is conducted in a single arm on TEMPO-substituted asymmetric ZnPc to elucidate the properties of star polymers. All linear and star polymers are characterized by FT-IR, UV-vis, fluorescence, GPC, NMR, and EPR techniques. The results show that the proposed reactions are capable of forming controlled star-shaped polymers. The increasing arm number (from a single to four arms) results in variable dispersity values (Đ) (1.2-3) due to different arm lengths, especially in NMP. However, this difficulty has been overcome via NER, and star polymers have been successfully synthesized with relatively low molecular weight (30 K > 10 K) and low dispersity (1.2-1.9). The results clearly indicate that while styrene and 4-vinyl benzyl chloride monomers are introduced to the structure equally, star polymers with phthalocyanine can be synthesized in a controlled manner, and their quarternized derivatives have the potential to be effective as photoactive agents in photodynamic therapy.

Controllable Synthesis of Chain Center Dye-Labeled Star Polymers for Quantitative Examination of Interchain Conformation by Time-Resolved Fluorescence Resonance Energy Transfer

Using a "core-first" approach with atom transfer radical polymerization, fluorescent center-functional star polymers of equivalent molecular weight but with varying numbers of arms (di-, tri-, and tetra-arm) were prepared. The sensitivity of fluorescence, combined with a dye-labeling technique introducing a fluorescent donor (carbazole) and an acceptor (anthracene) at the center of poly(methyl methacrylate) (PMMA) chains, enabled the application of time-resolved fluorescence resonance energy transfer to obtain quantitative insights into the conformation of the star polymer chains in the film state. When the results of star-branched polymers were compared with those of linear polymers of identical type and molecular weight, the impact of branching on polymer behavior was isolated for examination. Although the star topology does not alter the average intercoil distance, it affects the distance dispersity. Star polymers with higher arm numbers display decreased dispersity from distance due to reduced intermolecular aggregation at their geometric centers. This study presents the first spectroscopic evidence regarding the distribution of geometric centers in star polymers, offering a physical understanding of chain interpenetration and entanglement within star polymers.

Segregation kinetics of miktoarm star polymers: A dissipative particle dynamics study

We study the phase separation kinetics of miktoarm star polymer (MSP) melts/blends with diverse architectures using dissipative particle dynamics simulation. Our study focuses on symmetric and asymmetric miktoarm star polymer (SMSP/AMSP) mixtures based on arm composition and number. For a fixed MSP chain size, the characteristic microphase-separated domains initially show diffusive growth with a growth exponent ϕ∼1/3 for both melts that gradually crossover to saturation at late times. The simulation results demonstrate that the evolution morphology of SMSP melt exhibits perfect dynamic scaling with varying arm numbers; the timescale follows a power-law decay with an exponent θ≃1 as the number of arms increases. The structural constraints on AMSP melts cause the domain growth rate to decrease as the number of one type of arms increases while their length remains fixed. This increase in the number of arms for AMSP corresponds to increased off-criticality. The saturation length in AMSP follows a power-law increase with an exponent λ≃2/3 as off-criticality decreases. Additionally, macrophase separation kinetics in SMSP/AMSP blends show a transition from viscous (ϕ∼1) to inertial (ϕ∼2/3) hydrodynamic growth regimes at late times; this exhibits the same dynamical universality class as linear polymer blends, with slight deviations at early stages.

Efficient Synthesis of μ-A(BC)C Miktoarm Star Polymer Assemblies via Aqueous Photoinitiated Polymerization-Induced Self-Assembly

In this study, green light-activated photoiniferter reversible addition-fragmentation chain transfer (RAFT) polymerization of glycerol methacrylate was performed using an ω,ω-heterodifunctional macro-RAFT agent. Because of the different RAFT controllability of two RAFT groups toward methacrylic monomers, only one RAFT group was activated under green light irradiation, leading to the formation of a diblock copolymer macro-RAFT agent with one RAFT group located at the chain end and the other RAFT group located between two blocks. The obtained diblock copolymer macro-RAFT agent was then used to mediate aqueous photoinitiated RAFT dispersion polymerization of diacetone acrylamide (DAAM), which formed μ-A(BC)C miktoarm star polymer assemblies with a diverse set of morphologies. Comparing with the ABC triblock copolymer, it was found that the architecture of the μ-A(BC)C miktoarm star polymer facilitated the formation of higher-order morphologies. Kinetic studies indicated that the aqueous photoinitiated RAFT dispersion polymerization exhibited ultrafast polymerization behavior, with quantitative monomer conversion being achieved within 5 min. Size exclusion chromatography analysis confirmed that good RAFT control was maintained during the polymerization. A morphological phase diagram for μ-A(BC)C miktoarm star polymer assemblies was constructed by varying the monomer concentration and the [DAAM]/[Macro-RAFT] ratio. We expect that this study not only develops an approach for the preparation of miktoarm star polymer assemblies but also provides mechanistic insights into the polymerization-induced self-assembly of nonlinear polymers.

Polymeric Nanoparticles for Drug Delivery

The recent emergence of nanomedicine has revolutionized the therapeutic landscape and necessitated the creation of more sophisticated drug delivery systems. Polymeric nanoparticles sit at the forefront of numerous promising drug delivery designs, due to their unmatched control over physiochemical properties such as size, shape, architecture, charge, and surface functionality. Furthermore, polymeric nanoparticles have the ability to navigate various biological barriers to precisely target specific sites within the body, encapsulate a diverse range of therapeutic cargo and efficiently release this cargo in response to internal and external stimuli. However, despite these remarkable advantages, the presence of polymeric nanoparticles in wider clinical application is minimal. This review will provide a comprehensive understanding of polymeric nanoparticles as drug delivery vehicles. The biological barriers affecting drug delivery will be outlined first, followed by a comprehensive description of the various nanoparticle designs and preparation methods, beginning with the polymers on which they are based. The review will meticulously explore the current performance of polymeric nanoparticles against a myriad of diseases including cancer, viral and bacterial infections, before finally evaluating the advantages and crucial challenges that will determine their wider clinical potential in the decades to come.

Supramolecular Synthesis of Star Polymers

Supramolecular polymers, in which monomers are assembled via intermolecular interactions, have been extensively studied. The fusion of supramolecular polymers with conventional polymers has attracted the attention of many researchers. In this review article, the recent progress in the construction of supramolecular star polymers, including regular star polymers and miktoarm star polymers, is discussed. The initial sections briefly provide an overview of the conventional classification and synthesis methods for star polymers. Coordination-driven self-assembly was investigated for the supramolecular synthesis of star polymers. Star polymers with multiple polymer chains radiating from metal-organic polyhedra (MOPs) have also been described. Particular focus has been placed on the synthesis of star polymers featuring supramolecular cores formed through hydrogen-bonding-directed self-assembly. After describing the synthesis of star polymers based on host-guest complexes, the construction of miktoarm star polymers based on the molecular recognition of coordination capsules is detailed.

Well-defined star (co)polypeptides via a fast, efficient, and metal-free strategy

Polypeptides, especially star polypeptides, as a unique kind of biological macromolecules have broad applications in biomedical fields such as drug release, gene delivery, tissue engineering, and regenerative medicines due to their close structural similarity to naturally occurring peptides and proteins, biocompatibility, and amino acid functionality. However, the synthesis of star polypeptide mainly relies on the conventional primary amine-initiated ring-opening polymerization (ROP) of N-carboxyanhydrides (NCA) and suffers from low polymerization activity and limited controllability. This study proposes a fast, efficient and metal-free strategy to access star (co)polypeptides by combining the Michael reaction between acrylates and secondary aminoalcohols with the hydrogen-bonding organocatalytic ROP of NCA. This approach enables the preparation of a library of star (co)polypeptides with predesigned molecular weights, narrow molecular weight distributions, tunable arm number, and arm compositions. Importantly, this method exhibits high activity and selectivity at room temperature, making it both practical and versatile in synthesis applications.

Efficient gene delivery by multifunctional star poly (β-amino ester)s into difficult-to-transfect macrophages for M1 polarization

Gene delivery to macrophages holds great promise for cancer immunotherapy. However, traditional gene delivery methods exhibit low transfection efficiency in macrophages. The star-shaped topological structure of polymers is known to encapsulate genes inside their cores, thereby facilitating sustained release of the genetic material. Herein, combining the structural advantages of star polymers and the transfection advantages of poly (β-amino ester)s (PAEs), we developed a novel linear oligomer grafting-onto strategy to synthesize a library of multi-terminal star structured PAEs (SPAEs), and evaluated their gene delivery efficiency in various tissue cells. The transfection with human hepatocellular carcinoma cells (HepG2, HCC-LM3 cells and MHCC-97H cells), rat normal liver cells (BRL-3 A cells), human ovarian cancer cells (A2780 cells), African green monkey kidney cells (Vero cells), human cervical cancer cells (HeLa cells), human chondrosarcoma cells (SW1353 cells), and difficult-to-transfect human epidermal keratinocytes (HaCaT cells) and normal human fibroblast cells (NHF cells) showed that SPAEs exhibited superior transfection profile. The GFP transfection efficiency of top-performing SPAEs in HeLa cells (96.1%) was 2.1-fold, and 3.2-fold higher compared to jetPEI and Lipo3000, respectively, indicating that the star-shaped topological structure can significantly enhance the transfection efficiency of PAEs. More importantly, the top-performing SPAEs could efficiently deliver Nod2 DNA to difficult-to-transfect RAW264.7 macrophages, with a high transfection efficiency of 33.9%, which could promote macrophage M1 polarization and enhanced CD8+ T cell response in co-incubation experiments. This work advances gene therapy by targeting difficult-to-transfect macrophages and remodeling the tumor immune microenvironment.

Enhancing Targeted Photodynamic Therapy: Star-Shaped Glycopolymeric Photosensitizers for Improved Selectivity and Efficacy

Targeted photodynamic therapy (PDT) offers advantages over nontargeted approaches, including improved selectivity, efficacy, and reduced side effects. This study developed star-shaped glycopolymeric photosensitizers using porphyrin-based initiators via ATRP. Incorporating a porphyrin core gave the polymers fluorescence and ROS generation, while adding fructose improved solubility and targeting capabilities. The photosensitizers had high light absorption, singlet oxygen production, specificity, low dark toxicity, and biocompatibility. The glycopolymers with longer sugar arms and higher density showed better uptake on MCF-7 and MDA-MB-468 cells compared to HeLa cells, indicating enhanced targeting capabilities. Inhibition of endocytosis confirmed the importance of the GLUT5 receptor. The resulting polymers exhibited good cytocompatibility under dark conditions and satisfactory PDT under light irradiation. Interestingly, the polymers containing fructose have a GLUT5-dependent elimination effect on the MCF-7 and MDA-MB-468 cells. The intracellular ROS production followed a similar pattern, indicating that the fructose polymer exhibits specific targeting toward cells with GLUT5 receptors.

Recent progress of non-linear topological structure polymers: synthesis, and gene delivery

Currently, many types of non-linear topological structure polymers, such as brush-shaped, star, branched and dendritic structures, have captured much attention in the field of gene delivery and nanomedicine. Compared with linear polymers, non-linear topological structural polymers offer many advantages, including multiple terminal groups, broad and complicated spatial architecture and multi-functionality sites to enhance gene delivery efficiency and targeting capabilities. Nevertheless, the complexity of their synthesis process severely hampers the development and applications of nonlinear topological polymers. This review aims to highlight various synthetic approaches of non-linear topological architecture polymers, including reversible-deactivation radical polymerization (RDRP) including atom-transfer radical polymerization (ATRP), nitroxide-mediated polymerization (NMP), reversible addition-fragmentation chain transfer (RAFT) polymerization, click chemistry reactions and Michael addition, and thoroughly discuss their advantages and disadvantages, as well as analyze their further application potential. Finally, we comprehensively discuss and summarize different non-linear topological structure polymers for genetic materials delivering performance both in vitro and in vivo, which indicated that topological effects and nonlinear topologies play a crucial role in enhancing the transfection performance of polymeric vectors. This review offered a promising guideline for the design and development of novel nonlinear polymers and facilitated the development of a new generation of polymer-based gene vectors.

Morphology and Mechanics of Star Copolymer Ultrathin Films Probed by Atomic Force Microscopy in the Air and in Liquid

Star copolymer films were produced by using spin-coating, drop-casting, and casting deposition techniques, thus obtaining ultrathin and thick films, respectively. The morphology is generally flat, but it becomes substrate-dependent for ultrathin films where the planarization effect of films is not efficient. The indentation hardness of films was investigated by Force Volume Maps in both the air and liquid. In the air, ultrathin films are in the substrate-dominated zone and, thus, the elastic modulus E is overestimated, while E reaches its bulk value for drop-casted ultrathin and thick films. In liquid (water), E follows an exponential decay for all films with a minimum soaked time t0 of 0.37 and 2.65 h for ultrathin and drop-casted ultrathin and thick films, respectively. After this time, E saturates to a value on average 92% smaller than that measured in the air due to film swelling. Such results support the role of film morphology in the antimicrobial activity envisaged in the literature, suggesting also an additional role of film hardness.

Eco-Conscious Approach to Thermoresponsive Star-Comb and Mikto-Arm Polymers via Enzymatically Assisted Atom Transfer Radical Polymerization Followed by Ring-Opening Polymerization

This study explores the synthesis, characterization, and application of a heterofunctional initiator derived from 2-hydroxypropyl cyclodextrin (HP-β-CD), having eight bromoester groups and thirteen hydroxyl groups allowing the synthesis of mikto-arm star-shaped polymers. The bromoesterification of HP-β-CD was achieved using α-bromoisobutyryl bromide as the acylation reagent, modifying the cyclodextrin (CD) molecule as confirmed by electrospray ionization mass spectrometry (ESI-MS), nuclear magnetic resonance (NMR), attenuated total reflection-Fourier transform infrared (ATR-FTIR) spectroscopy analysis, and differential scanning calorimetry (DSC) thermograms. The initiator's effectiveness was further demonstrated by obtaining star-comb and mikto-arm polymers via an enzymatically assisted atom transfer radical polymerization (ATRP) method and subsequent ring-opening polymerization (ROP). The ATR polymerization quality and control depended on the type of monomer and was optimized by the way of introducing the initiator into the reaction mixture. In the case of ATRP, high conversion rates for poly(ethylene oxide) methyl ether methacrylate (OEOMA), with molecular weights (Mn) of 500 g/mol and 300 g/mol, were achieved. The molecular weight distribution of the obtained polymers remained in the range of 1.23-1.75. The obtained star-comb polymers were characterized by different arm lengths. Unreacted hydroxyl groups in the core of exemplary star-comb polymers were utilized in the ROP of ε-caprolactone (CL) to obtain a hydrophilic mikto-arm polymer. Cloud point temperature (TCP) values of the synthesized polymers increased with arm length, indicating the polymers' reduced hydrophobicity and enhanced solvation by water. Atomic force microscopy (AFM) analysis revealed the ability of the star-comb polymers to create fractals. The study elucidates advancements in the synthesis and utilization of hydrophilic sugar-based initiators for enzymatically assisted ATRP in an aqueous solution for obtaining complex star-comb polymers in a controlled manner.

Flexible Poly(vinyl chloride) with Durable Antibiofouling Property via Blending Star-Shaped Amphiphilic Poly(ε-caprolactone)-block-poly(methacryloxyethyl sulfobetaine)

Flexible poly(vinyl chloride) (PVC) plastics have been widely used in medical devices, but the preparation of antibiofouling flexible PVC materials that can maintain their antibiofouling performance when suffering deformation is still a challenge. In this work, we synthesized a series of amphiphilic star-shaped three-arm block copolymers SPCL-b-PSB, consisting of hydrophobic inner blocks poly(ε-caprolactone) (PCL) and hydrophilic outer blocks poly(methacryloxyethyl sulfobetaine) (PSB). Then, flexible PVC films were prepared by blending SPCL-b-PSB with PVC and plasticizer. Benefiting from the specific star-shaped topological structure of SPCL-b-PSB, hydrophilic PSB blocks of the copolymer could efficiently migrate to the surface of the film via annealing treatment, which give the film surface excellent hydrophilicity, while the latch-like entanglements between hydrophobic PCL blocks and PVC give the hydrophilic surface excellent stability. Antibiofouling properties of the blended films were investigated. The optimized blended film could reduce ∼94% of bovine serum albumin adsorption, ∼ 87% of lysozyme adsorption, and ∼89% of platelet adhesion and resist bacterial adhesion effectively. What is more, the blended films could maintain their antibiofouling performance when suffering stretching, rubbing, or bending. More than 86% of bovine serum albumin adsorption could be reduced, even when the film was stretched by 50%. This work provides a new strategy for the preparation of durable antibiofouling flexible plastics.

Chiral Confined Unimolecular Micelles for Controlled In Situ Fabrication of Optically Active Hybrid Nanostructures

Functional nanomaterials made by chiral induction have attracted extensive attention because of their intriguing characteristics and potential applications. However, the precise and controllable fabrication of chiral nanomaterials still remains challenging but is highly desired. In this study, chiral unimolecular micelles with different molecular weights and chiroptical activities were prepared by photoinduced atom transfer radical polymerization (photoATRP). Through nanoconfined growth, the chiral plasmonic nanoparticle assemblies with predesigned size and morphology were prepared using chiral unimolecular micelles as nanoreactors. The controllability over chiral assemblies and the size effect on chiroptical properties were also investigated. Furthermore, chiral complexes with absorption asymmetry and circularly polarized luminescence (glum = 4.25 × 10-4) were easily constructed via mixing of organic fluorescent molecules and chiral templates based on intermolecular hydrogen bonds. Such results indicated that our unimolecular-micelle-based templates enable the controllable preparation of both inorganic and organic chiral nanostructures with tailored dimensions, sizes, compositions, and optical activities.

Efficient Synthesis of Cyclic Poly(ethylene glycol)s under High Concentration Conditions by the Assistance of Pseudopolyrotaxane with Cyclodextrin Derivatives

An efficient synthesis of cyclic polymers (CPs) is in high demand due to their unique properties. However, polymer cyclization generally occurs at low concentrations (0.1 g/L), and the synthesis of CPs at high concentrations remains a challenge. Herein an efficient cyclization of poly(ethylene glycol) (Mn = 2000 g/mol, 4000 g/mol) (PEG-2k, PEG-4k) in high concentration (80 g/L) is realized by the assistance of pseudopolyrotaxane (pPRx). Water-soluble pPRx with a U-like-shape inclusion motif is prepared by mixing the 2-hydroxypropyl-γ-cyclodextrin (HPγCD) and PEG with (E)-3,4,5-trimethoxycinnamate (TCA-PEG-2k, TCA-PEG-4k). Subsequent irradiation of the pPRx solution (10-80 g/L) by UV light gives cyclic polymers through the intramolecular [2 + 2] photocycloaddition of the cinnamoyl moieties. The photoreaction of TCA-PEG-2k in the pPRx system gives cyclic monomers (C-1mer) as major products with a yield of 66% at 80 g/L. Additionally, the cyclization of TCA-PEG-4k also gives C-1mer as major products with a yield of 45% at a concentration of 80 g/L.

Colloidal Polymer-Templated Formation of Inorganic Nanocrystals and their Emerging Applications

Inorganic nanocrystals possess unique physicochemical properties compared to their bulk counterparts. Stabilizing agents are commonly used for the preparation of inorganic nanocrystals with controllable properties. Particularly, colloidal polymers have emerged as general and robust templates for in situ formation and confinement of inorganic nanocrystals. In addition to templating and stabilizing inorganic nanocrystals, colloidal polymers can tailor their physicochemical properties such as size, shape, structure, composition, surface chemistry, and so on. By incorporating functional groups into colloidal polymers, desired functions can be integrated with inorganic nanocrystals, advancing their potential applications. Here, recent advances in the colloidal polymer-templated formation of inorganic nanocrystals are reviewed. Seven types of colloidal polymers, including dendrimer, polymer micelle, stare-like block polymer, bottlebrush polymer, spherical polyelectrolyte brush, microgel, and single-chain nanoparticle, have been extensively applied for the synthesis of inorganic nanocrystals. Different strategies for the development of these colloidal polymer-templated inorganic nanocrystals are summarized. Then, their emerging applications in the fields of catalysis, biomedicine, solar cells, sensing, light-emitting diodes, and lithium-ion batteries are highlighted. Last, the remaining issues and future directions are discussed. This review will stimulate the development and application of colloidal polymer-templated inorganic nanocrystals.

Catalytic Living ROMP: Synthesis of Degradable Star Polymers

Star polymers have attracted considerable attention over the past few years due to their distinctive physical and chemical attributes that are different from conventional linear polymers. Here, we present a one-pot synthesis of narrowly dispersed and degradable homoarm and miktoarm star polymers exploiting the catalytic living ring-opening metathesis polymerization (ROMP) mechanism. Several complex polymeric architectures (such as A3-, A4-, A6-, A2B-, A3B-, and AB2-type star polymers) were synthesized quite straightforwardly by using appropriate vinyl ether chain transfer agents. SEC, 1H NMR, and DOSY NMR spectroscopy were employed to analyze and characterize all of the synthesized polymers. We believe that this sustainable and environmentally friendly synthesis of star polymers could become an important synthetic tool for polymer engineers working on supramolecular, industrial or biomedical applications.

Copolymer Brush Particle Hybrid Materials with "Recall-and-Repair" Capability

The effect of sequence structure on the self-healing and shape-memory properties of copolymer-tethered brush particle films was investigated and compared to linear copolymer analogs. Poly(n-butyl acrylate-co-methyl methacrylate), P(BA-co-MMA), and linear and brush analogs with controlled gradient and statistical sequence were synthesized by atom transfer radical polymerization (ATRP). The effect of sequence on self-healing in BA/MMA copolymer brush particle hybrids followed similar trends as for linear analogs. Most rapid restoration of mechanical properties was found for statistical copolymer sequence; an increase of the high Tg (MMA) component provided a path to raise the material's modulus while retaining self-heal ability. Creep testing revealed profound differences between linear and brush systems. While linear copolymers featured substantial viscous deformation when exposed to constant stress in the linear regime, brush analogs displayed minimal permanent deformation and featured shape restoration. The reduction of flow was interpreted to be a consequence of slow cooperative relaxation due to the complex microstructure of brush particle hybrids in which long-range motions are constrained through entanglements and slow-diffusing particle cores. The rubbery-like response imparts BA/MMA copolymer brush material systems concurrent "shape-memory" and "self-heal" capability. This ability to "recall-and-repair" could find application in the design of functional hybrid materials, for example, for soft robotics.

Influence of Surface Texturing on the Dry Tribological Properties of Polymers in Medical Devices

There is a constant need to improve patient comfort and product performance associated with the use of medical devices. Efforts to optimise the tribological characteristics of medical devices usually involve modifying existing devices without compromising their main design features and functionality. This article constitutes a state-of-the-art review of the influence of dry friction on polymeric components used in medical devices, including those having microscale surface features. Surface tribology and contact interactions are discussed, along with alternative forms of surface texturing. Evident gaps in the literature, and areas warranting future research are highlighted; these include friction involving polymer Vs polymer surfaces, information regarding which topologies and feature spacings provide the best performing textured surfaces, and design guidelines that would assist manufacturers to minimise or maximise friction under non-lubricated conditions.

Poly(2-oxazoline)-based core cross-linked star polymers: synthesis and drug delivery applications

Poly(2-oxazoline)s (POxs) are promising platforms for drug delivery applications due to their biocompatibility and stealth properties. In addition, the use of core cross-linked star (CCS) polymers based on POxs is expected to enhance drug encapsulation and release performances. In this study, we employed the "arm-first" strategy to synthesize a series of amphiphilic CCS [poly(2-methyl-2-oxazoline)]_n-block-poly(2,2'-(1,4-phenylene)bis-2-oxazoline)-cross-link/copolymer-(2-n-butyl-2-oxazoline)s (PMeOx)_n-b-P(PhBisOx-cl/co-ButOx)s by using microwave-assisted cationic ring-opening polymerization (CROP). First, PMeOx, as the hydrophilic arm, was synthesized by CROP of MeOx using methyl tosylate as the initiator. Subsequently, the living PMeOx was used as the macroinitiator to initiate the copolymerization/core-crosslinking reaction of ButOx and PhBisOx to form CCS POxs having a hydrophobic core. The molecular structures of the resulting CCS POxs were characterized by size exclusion chromatography and nuclear magnetic resonance spectroscopy. The CCS POxs were loaded with the anti-cancer drug doxorubicin (DOX), and the loading was detected by UV-vis spectrometry, dynamic light scattering, and transmission electron microscopy. In vitro studies showed that DOX release at pH 5.2 was faster than that at pH 7.1. The in vitro cytotoxicity study using HeLa cells revealed that the neat CCS POxs are compatible with the cells. In contrast, the DOX-loaded CCS POxs exhibited a cytotoxic effect in a concentration-dependent manner in HeLa cells, which strongly supports that the CSS POxs are potential candidates for drug delivery applications.

Unimolecular Micelles from Randomly Grafted Arborescent Copolymers with Different Core Branching Densities: Encapsulation of Doxorubicin and In Vitro Release Study

A series of amphiphilic arborescent copolymers of generations G1 and G2 with an arborescent poly(γ-benzyl L-glutamate) (PBG) core and poly(ethylene oxide) (PEO) chain segments in the shell, PBG-g-PEO, were synthesized and evaluated as drug delivery nanocarriers. The PBG building blocks were generated by ring-opening polymerization of γ-benzyl L-glutamic acid N-carboxyanhydride (Glu-NCA) initiated with n-hexylamine. Partial or full deprotection of the benzyl ester groups followed by coupling with PBG chains yielded a comb-branched (arborescent polymer generation zero or G0) PBG structure. Additional cycles of deprotection and grafting provided G1 and G2 arborescent polypeptides. Side chains of poly(ethylene oxide) were then randomly grafted onto the arborescent PBG substrates to produce amphiphilic arborescent copolymers. Control over the branching density of G0PBG was investigated by varying the length and the deprotection level of the linear PBG substrates used in their synthesis. Three G0PBG cores with different branching densities, varying from a compact and dense to a loose and more porous structure, were thus synthesized. These amphiphilic copolymers behaved similar to unimolecular micelles in aqueous solutions, with a unimodal number- and volume-weighted size distributions in dynamic light scattering measurements. It was demonstrated that these biocompatible copolymers can encapsulate hydrophobic drugs such as doxorubicin (DOX) within their hydrophobic core with drug loading efficiencies of 42-65%. Sustained and pH-responsive DOX release was observed from the unimolecular micelles, which suggests that they could be useful as drug nanocarriers for cancer therapy.

Gelation and Re-entrance in Mixtures of Soft Colloids and Linear Polymers of Equal Size

Liquid mixtures composed of colloidal particles and much smaller non-adsorbing linear homopolymers can undergo a gelation transition due to polymer-mediated depletion forces. We now show that the addition of linear polymers to suspensions of soft colloids having the same hydrodynamic size yields a liquid-to-gel-to-re-entrant liquid transition. In particular, the dynamic state diagram of 1,4-polybutadiene star-linear polymer mixtures was determined with the help of linear viscoelastic and small-angle X-ray scattering experiments. While keeping the star polymers below their nominal overlap concentration, a gel was formed upon increasing the linear polymer content. Further addition of linear chains yielded a re-entrant liquid. This unexpected behavior was rationalized by the interplay of three possible phenomena: (i) depletion interactions, driven by the size disparity between the stars and the polymer length scale which is the mesh size of its entanglement network; (ii) colloidal deswelling due to the increased osmotic pressure exerted onto the stars; and (iii) a concomitant progressive suppression of the depletion efficiency on increasing the polymer concentration due to reduced mesh size, hence a smaller range of attraction. Our results unveil an exciting new way to tailor the flow of soft colloids and highlight a largely unexplored path to engineer soft colloidal mixtures.

Tuning the Endocytosis of Hybrid Micelles through Spatial Regulation of Cationic Groups

The ability of nanocarriers to enter tumor cells can be enhanced by positive surface charge. Nonetheless, the relationship between the spatial distributions of cationic groups and the endocytosis and tumor penetration of nanocarriers remains largely elusive. Here, using quaternary ammonium salt (QAS) as a model cationic group, a series of hybrid micelles (HMs) bearing QAS with different spatial distributions were prepared from star-shaped polymers with well-defined molecular architectures. The structural characteristics of HM, such as spatial location of QAS and local poly(ethylene glycol) (PEG) density near QAS, were investigated by both experimental techniques and dissipative particle dynamics (DPD) simulation. We show that the drug carriers with QAS extending to the micellar outer space allows QAS to facilitate cell surface binding with minimized hindrance, resulting in greatly enhanced endocytosis compared with nanocarriers with QAS attached onto the micellar surface or shielded by a PEG corona. This study offers cues for future development of tumor-penetrating drug delivery systems.

Structural Engineering of Star Block Biodegradable Polymer Unimolecular Micelles for Drug Delivery in Cancer Cells

The present investigation reports the structural engineering of biodegradable star block polycaprolactone (PCL) to tailor-make aggregated micelles and unimolecular micelles to study their effect on drug delivery aspects in cancer cell lines. Fully PCL-based star block copolymers were designed by varying the arm numbers from two to eight while keeping the arm length constant throughout. Multifunctional initiators were exploited for stepwise solvent-free melt ring-opening polymerization of ε-caprolactone and γ-substituted caprolactone to construct star block copolymers having a PCL hydrophobic core and a carboxylic PCL hydrophilic shell, respectively. A higher arm number and a higher degree of branching in star polymers facilitated the formation of unimolecular micelles as opposed to the formation of conventional multimicellar aggregates in lower arm analogues. The dense core of the unimolecular micelles enabled them to load high amounts of the anticancer drug doxorubicin (DOX, ∼12-15%) compared to the aggregated micelles (∼3-4%). The star unimolecular micelle completely degraded leading to 90% release of the loaded drug upon treatment with the lysosomal esterase enzyme in vitro. The anticancer efficacies of these DOX-loaded unimolecular micelles were tested in a breast cancer cell line (MCF-7), and their IC₅₀ values were found to be much lower compared to those of aggregated micelles. Time-dependent cellular uptake studies by confocal microscopy revealed that unimolecular micelles were readily taken up by the cells, and enhancement of the drug concentration was observed at the intracellular level up to 36 h. The present work opens new synthetic strategies for building a next-generation biodegradable unimolecular micellar nanoplatform for drug delivery in cancer research.

Supramolecular interaction enabled preparation of high-strength water-based adhesives from polymethylmethacrylate wastes

The preparation of water-based adhesives with high bonding strength for various substrates is challenging. Moreover, to construct a sustainable society, it is highly desirable to develop a cost-effective way to achieve the reuse of plastic wastes. Herein, using polymethylmethacrylate (PMMA) chemicals or wastes as raw materials, water-based adhesives with high bonding strength for various substrates are prepared through a simple one-step hydrolysis strategy. The adhesives possess the maximum bonding strength of 7.1 MPa to iron, 4.2 MPa to wood, and ∼1.5 MPa to plastics. The adhesives have a world-record bonding strength to metal when compared with that of current reported water-based adhesives. Our method is low cost, simple, environmentally friendly, and suitable for large-scale industrial production. More importantly, using plastic wastes as raw materials opens up a new and low-cost way to turn wastes into valuables, which will greatly contribute to construct a sustainable society.

5-Fluorouracil nano-delivery systems as a cutting-edge for cancer therapy

5-Fluorouracil (5-FU) is amongst the most commonly used antimetabolite chemotherapeutic agents in recent decades. However, its low bioavailability, short half-life, rapid metabolism and the development of drug resistance after chemotherapy limit its therapeutic efficiency. In this study, 5-FU applications as an anti-cancer drug for treating diverse types of cancers (e.g. colon, pancreatic and breast) have been reviewed. Different approaches lately designed to circumvent the drawbacks of 5-FU therapy are described herein, including 5-FU-loaded lipid-based nanoparticles (NPs), polymeric NPs (both stimuli and non-stimuli responsive), carbon-based nanostructures and inorganic NPs. Furthermore, co-delivery systems of 5-FU with other drugs (e.g. paclitaxel, gelatin-doxorubicin and naproxen) have been reviewed, which aid to attain better bioavailability, higher effectiveness at a lower concentration and lower toxicity. This review provides researchers with the latest progress on 5-FU-loaded nanocarriers, which show great potential as an advanced tool for cancer therapy.

Mesoscopic Simulations of Diselenide-Containing Crosslinked Doxorubicin-Loaded Micelles and Their Tumor Microenvironment Responsive Release Behaviors

There is currently limited research on the structure-property relationship of reduction stimuli-responsive polymeric crosslinked micelles using mesoscopic simulations. Herein, dissipative particle dynamics (DPD) simulations were used to simulate the self-assembly process of the blank non-crosslinked micelle, the structure and doxorubicin (DOX) distribution of diselenide crosslinked micelle with different crosslinker contents (CCs) based on the nearest-neighbor bonding principle. The results revealed that the formation of a three-layer spherical micelle and the loaded DOX mainly distributed in the polycaprolactone (PCL) core and hydroxyethyl methacrylate (HEMA) mesosphere. The larger the dosage of DOX, the more DOX encapsulated, but the encapsulation of DOX in the hydrophobic domain would reach saturation when the dosage increased to 6.0 %. In micelles with lower CCs or crosslinking levels (CLs), DOX entered the middle layer and the inner core faster. Then, based on the nearest media-bead bond breaking principle and subsequently DPD simulation, the effects of different CCs on the micelle structure and DOX release properties were investigated. Low CC could cause fast drug release. With the increase of CCs, the micelle showed a slower DOX release trend. The multilayer crosslinked network system also affected the DOX release rate. Hence, this work can provide some mesoscale guidance for the structural design and structure-property relationship of stimuli-responsive reversible crosslinked micelles for drug delivery.

Multiscale Spectral Analysis on Lysozyme Aqueous Solutions in the Presence of PolyEthyleneGlycol

Infrared spectroscopy measurements were performed on Lysozyme aqueous solutions also in the presence of PolyEthylene Glycol (PEG 400) as a function of an increasing temperature from T = 27 °C to 90 °C, and, successively in sequence, by decreasing temperatures from T = 90 °C to 27 °C. Data were analyzed by evaluating the spectral difference with respect to the initial spectrum collected at 27 °C. This procedure allows to quantitatively evaluate the thermal restraint related to the thermal scan from T = 27 °C to 90 °C, as well as to introduce a spectral resilience concerning the entire increasing and decreasing thermal paths which allow to highlight the bioprotectant effectiveness of low molecular weight PEG. In particular, the main purpose of the present work is to highlight the effects of a thermal treatment on a mixture of Lysozyme/water and of Lysozyme/water/PEG 400 during an increasing temperature scan, and then after a successive decreasing temperature scan, in order to highlight the bioprotectant role of PEG 400. On that score, an evaluation of the spectral distances of the registered spectra as a function of increasing and decreasing temperatures has been performed and analyzed.

Ecotoxicity of Polyvinylidene Difluoride (PVDF) and Polylactic Acid (PLA) Microplastics in Marine Zooplankton

The aim of this study was to investigate the ecotoxicity of polyvinylidene difluoride (PVDF) and polylactic acid (PLA) microplastics (MPs) in two marine zooplankton: the crustacean Artemia franciscana and the cnidarian Aurelia sp. (common jellyfish). To achieve this goal, (i) MP uptake, (ii) immobility, and (iii) behavior (swimming speed, pulsation mode) of crustacean larval stages and jellyfish ephyrae exposed to MPs concentrations (1, 10, 100 mg/L) were assessed for 24 h. Using traditional and novel techniques, i.e., epifluorescence microscopy and 3D holotomography (HT), PVDF and PLA MPs were found in the digestive systems of the crustaceans and in the gelatinous tissue of jellyfish. Immobility was not affected in either organism, while a significant behavioral alteration in terms of pulsation mode was found in jellyfish after exposure to both PVDF and PLA MPs. Moreover, PLA MPs exposure in jellyfish induced a toxic effect (EC50: 77.43 mg/L) on the behavioral response. This study provides new insights into PLA and PVDF toxicity with the potential for a large impact on the marine ecosystem, since jellyfish play a key role in the marine food chain. However, further investigations incorporating additional species belonging to other trophic levels are paramount to better understand and clarify the impact of such polymers at micro scale in the marine environment. These findings suggest that although PVDF and PLA have been recently proposed as innovative and, in the case of PLA, biodegradable polymers, their effects on marine biota should not be underestimated.

Controlling the Processability and Stability of Supramolecular Polymers Using the Interplay of Intra- and Intermolecular Interactions

Polymer networks crosslinked via non-covalent interactions afford interesting materials for a wide range of applications due to their self-healing capability, recyclability, and tunable material properties. However, when strong non-covalent binding motifs in combination with high crosslink density are used, processing of the materials becomes troublesome because of high viscosities and the formation of insoluble gels. Here, we present an approach to control the processability of grafted polymers containing strong non-covalent interactions by balancing the interplay of intra- and intermolecular hydrogen bonding. A library of copolymers with different degrees of polymerization and content of protected ureido-pyrimidinone-urea (UPy-urea) grafts was prepared. Photo-deprotection in a good solvent like tetrahydrofuran (THF) at low concentrations (≤1 mg mL-1) created intramolecularly assembled nanoparticles. Remarkably, the intrinsic viscosity of these nanoparticle solutions was an order of magnitude lower compared to solutions of the intermolecularly assembled analogues, highlighting the crucial role of intra- versus intermolecular interactions. Due to the strong hydrogen bonds between UPy dimers, the intramolecularly assembled structures were kinetically trapped. As a result, the polymer nanoparticles were readily processed into a bulk material, without causing major changes in the morphology as verified by atomic force microscopy. Subsequent intermolecular crosslinking of the nanoparticle film, by heating to temperatures where the hydrogen-bond exchange becomes fast, resulted in a crosslinked network. The reversibility of the hereby obtained polymer networks was shown by retrieving the intramolecularly assembled nanoparticles via redissolution and sonication of the intermolecularly crosslinked film in THF with a small amount of acid. Our results highlight that the stability and processability of highly supramolecularly crosslinked polymers can be controlled both in solution and in bulk by using the interplay of intra- and intermolecular non-covalent interactions in grafted polymers.

Star Polymers vs. Dendrimers: Studies of the Synthesis Based on Computer Simulations

A generic model was developed for studies of the polymerization process of regular branched macromolecules. Monte Carlo simulations were performed employing the Dynamic Lattice Liquid algorithm to study this process. A core-first methodology was used in a living polymerization of stars with up to 32 arms, and dendrimers consisted of 4-functional segments. The kinetics of the synthesis process for stars with different numbers of branches and dendrimers was compared. The size and structure of star-branched polymers and dendrimers during the synthesis were studied. The influence of the functionality of well-defined cores on the structure and on the dispersity of the system was also examined. The differences in the kinetics in the formation of both architectures, as well as changes to their structures, were described and discussed.

Polymersomes: Soft Nanoparticles from Miktoarm Stars for Applications in Drug Delivery

Self-assembly of amphiphilic macromolecules has provided an advantageous platform to address significant issues in a variety of areas, including biology. Such soft nanoparticles with a hydrophobic core and hydrophilic corona, referred to as micelles, have been extensively investigated for delivering lipophilic therapeutics by physical encapsulation. Polymeric vesicles or polymersomes with similarities in morphology to liposomes continue to play an essential role in understanding the behavior of cell membranes and, in addition, have offered opportunities in designing smart nanoformulations. With the evolution in synthetic methodologies to macromolecular precursors, the construction of such assemblies can now be modulated to tailor their properties to match desired needs. This review brings into focus the current state-of-the-art in the design of polymersomes using amphiphilic miktoarm star polymers through a detailed analysis of the synthesis of miktoarm star polymers with tuned lengths of varied polymeric arms, their self-assembly, and applications in drug delivery.

Double hydrophilic copolymers - synthetic approaches, architectural variety, and current application fields

Solubility and functionality of polymeric materials are essential properties determining their role in any application. In that regard, double hydrophilic copolymers (DHC) are typically constructed from two chemically dissimilar but water-soluble building blocks. During the past decades, these materials have been intensely developed and utilised as, e.g., matrices for the design of multifunctional hybrid materials, in drug carriers and gene delivery, as nanoreactors, or as sensors. This is predominantly due to almost unlimited possibilities to precisely tune DHC composition and topology, their solution behavior, e.g., stimuli-response, and potential interactions with small molecules, ions and (nanoparticle) surfaces. In this contribution we want to highlight that this class of polymers has experienced tremendous progress regarding synthesis, architectural variety, and the possibility to combine response to different stimuli within one material. Especially the implementation of DHCs as versatile building blocks in hybrid materials expanded the range of water-based applications during the last two decades, which now includes also photocatalysis, sensing, and 3D inkjet printing of hydrogels, definitely going beyond already well-established utilisation in biomedicine or as templates.

Hierarchy of Complex Glycomacromolecules: From Controlled Topologies to Biomedical Applications

Carbohydrates bearing a distinct complexity use a special code (Glycocode) to communicate with carbohydrate-binding proteins at a high precision to manipulate biological activities in complex biological environments. The level of complexity in carbohydrate-containing macromolecules controls the amount and specificity of information that can be stored in biomacromolecules. Therefore, a better understanding of the glycocode is crucial to open new areas of biomedical applications by controlling or manipulating the interaction between immune cells and pathogens in terms of trafficking and signaling, which would become a powerful tool to prevent infectious diseases. Even though a certain level of progress has been achieved over the past decade, synthetic glycomacromolecules are still lagging far behind naturally existing glycans in terms of complexity and precision because of insufficient and inefficient synthetic techniques. Currently, specific targeting at a cellular level using synthetic glycomacromolecules is still challenging. It is obvious that multidisciplinary collaborations are essential between different specialized disciplines to enhance the carbohydrate receptor-targeting paradigm for new biomedical applications. In this Perspective, recent developments in the synthesis of sophisticated glycomacromolecules are highlighted, and their biological and biomedical applications are also discussed in detail.

Differences and similarities between mono-, bi- or tetrafunctional initiated cationic ring-opening polymerization of 2-oxazolines

Cationic ring-opening polymerization (CROP) is an interesting synthesis technique to obtain well-defined polymers with narrow molar mass distribution (MMD).

Degradable thiomethacrylate core-crosslinked star-shaped polymers

Degradable polymers are considered to present a promising solution to combat plastic pollution. However, many polymers are based on ester and amide bonds, which often require high temperatures and acidic/basic...

Star-like poly(peptoid)s with selective antibacterial activity

We developed new macromolecular engineering approaches enabling the preparation of star-shaped and antimicrobial polypeptoids by ring-opening polymerization.