Recent advances in regenerated cellulose materials

Periodate oxidation-mediated nanocelluloses: Preparation, functionalization, structural design, and applications

In recent years, the remarkable progress in nanotechnology has ignited considerable interest in investigating nanocelluloses, an environmentally friendly and sustainable nanomaterial derived from cellulosic feedstocks. Current research primarily focuses on the preparation and applications of nanocelluloses. However, to enhance the efficiency of nanofibrillation, reduce energy consumption, and expand nanocellulose applications, chemical pre-treatments of cellulose fibers have attracted substantial interest and extensive exploration. Various chemical pre-treatment methods yield nanocelluloses with diverse functional groups. Among these methods, periodate oxidation has garnered significant attention recently, due to the formation of dialdehyde cellulose derived nanocellulose, which exhibits great promise for further modification with various functional groups. This review seeks to provide a comprehensive and in-depth examination of periodate oxidation-mediated nanocelluloses (PONCs), including their preparation, functionalization, hierarchical structural design, and applications. We believe that PONCs stand as highly promising candidates for the development of novel nano-cellulosic materials.

Structuring restricted amorphous molecular chains in the reinforced cellulose film by uniaxial stretching

The construction of the preferred orientation structure by stretching is an efficient strategy to fabricate high-performance cellulose film and it is still an open issue whether crystalline structure or amorphous molecular chain is the key factor in determining the enhanced mechanical performance. Herein, uniaxial stretching with constant width followed by drying in a stretching state was carried out to cellulose hydrogels with physical and chemical double cross-linking networks, achieving high-performance regenerated cellulose films (RCFs) with an impressive tensile strength of 154.5 MPa and an elastic modulus of 5.4 GPa. The hierarchical structure of RCFs during uniaxial stretching and drying was systematically characterized from micro- to nanoscale, including microscopic morphology, crystalline structure as well as relaxation behavior at a molecular level. The two-dimensional correlation spectra of dynamic mechanical analysis and Havriliak-Negami fitting results verified that the enhanced mechanical properties of RCFs were mainly attributed to the stretch-induced tight packing and restricted relaxation of amorphous molecular chains. The new insight concerning the contribution of molecular chains in the amorphous region to the enhancement of mechanical performance for RCFs is expected to provide valuable guidance for designing and fabricating high-performance eco-friendly cellulose-based films.

A one-stone-two-birds strategy for cellulose dissolution, regeneration, and functionalization as a photocatalytic composite membrane for wastewater purification

Photocatalytic membranes integrate membrane separation and photocatalysis to deliver an efficient solution for water purification, while the top priority is to exploit simple, efficient, renewable, and low-cost photocatalytic membrane materials. We herein propose a facile one-stone-two-birds strategy to construct a multifunctional regenerated cellulose composite membrane decorated by Prussian blue analogue (ZnPBA) microspheres for wastewater purification. The hypotheses are that: 1) ZnCl2 not only serves as a cellulose solvent for tuning cellulose dissolution and regeneration, but also functions as a precursor for in-situ growth of spherical-like ZnPBA; 2) More homogeneous reactions including coordination and hydrogen bonding among Zn2+, [Fe(CN)6]3- and cellulose chains contribute to a rapid and uniform anchoring of ZnPBA microspheres on the regenerated cellulose fibrils (RCFs). Consequently, the resultant ZnPBA/RCM features a high loading of ZnPBA (65.3 wt%) and exhibits excellent treatment efficiency and reusability in terms of photocatalytic degradation of tetracycline (TC) (90.3 % removal efficiency and 54.3 % of mineralization), oil-water separation efficiency (>97.8 % for varying oils) and antibacterial performance (99.4 % for E. coli and 99.2 % for S. aureus). This work paves a simple and useful way for exploiting cellulose-based functional materials for efficient wastewater purification.

Asymmetric ionic bond shielding encountering with carboxylate capturing metal ions for enhancing the flame retardant durability of regenerated cellulose fibers

Enhancing the flame retardancy and durability of cellulose fibers, particularly environmentally friendly regenerated cellulose fibers types like Lyocell fibers, is essential for advancing their broader application. This study introduced a novel approach to address this challenge. Cationic-modified Lyocell fibers (Lyocell@CAT) were prepared by introducing quaternary ammonium structures into the molecular chain of Lyocell fibers. Simultaneously, a flame retardant, APA, containing -COO-NH4+ and -P=O(O-NH4+)2 groups was synthesized. APA was then covalently bonded to Lyocell@CAT to prepare Lyocell@CAT@APA. Even after undergoing 30 laundering cycles (LCs), Lyocell@CAT@APA maintained a LOI value of 37.2 %, exhibiting outstanding flame retardant durability. The quaternary ammonium structure within Lyocell@CAT@APA formed asymmetric ionic bonds with the phosphate and carboxylate groups in APA, effectively shielding the binding of Na+ ions with phosphate groups during laundering, thereby enhancing the durability. Additionally, the consumption of Na+ ions by carboxylate groups further prevented their binding to phosphate groups, which contributed to enhance the durability properties. Flame retardant mechanism analysis revealed that both gas and condensed phase synergistically endowed excellent flame retardancy to Lyocell fibers. Overall, this innovative strategy presented a promising prospect for developing bio-safe, durable, and flame retardant cellulose textiles.

Revisiting various mechanistic approaches for cellulose dissolution in different solvent systems: A comprehensive review

The process of dissolving cellulose is a pivotal step in transforming it into functional, value-added materials, necessitating a thorough comprehension of the underlying mechanisms to refine its advanced processing. This article reviews cellulose dissolution using various solvent systems, along with an in-depth exploration of the associated dissolution mechanisms. The efficacy of different solvents, including aqueous solvents, organic solvents, ionic liquids, hybrid ionic liquid/cosolvent systems, and deep eutectic solvents, in dissolving cellulose is scrutinized, and their limitations and advantages are highlighted. In addition, this review methodically outlines the mechanisms at play within these various solvent systems and the factors influencing cellulose solubility. Conclusions drawn highlight the integral roles of the degree of polymerization, crystallinity, particle size, the type and sizes of cations and anions, alkyl chain length, ionic liquid/cosolvent ratio, viscosity, solvent acidity, basicity, and hydrophobic interactions in the dissolution process. This comprehensive review aims to provide valuable insights for researchers investigating biopolymer dissolution in a broader context, thereby paving the way for broader applications and innovations of these solvent systems.

Development of cellulose/ZnO based bioplastics with enhanced gas barrier, UV-shielding effect and antibacterial activity

Development of renewable and biodegradable plastics with good properties, such as the gas barrier, UV-shielding, solvent resistance, and antibacterial activity, remains a challenge. Herein, cellulose/ZnO based bioplastics were fabricated by dissolving cellulose carbamate in an aqueous solution of NaOH/Zn(OH)42-, followed by coagulation in aqueous Na2SO4 solution, and subsequent hot-pressing. The carbamate groups detached from cellulose, and ZnO which transformed from cosolvent to nanofiller was uniformly immobilized in the cellulose matrix during the dissolution/regeneration process. The appropriate addition of ZnO (below 10.67 wt%) not only improved the mechanical properties but also enhanced the water and oxygen barrier properties of the material. Additionally, our cellulose/ZnO based bioplastic demonstrated excellent UV-blocking capabilities, increased water contact angle, and enhanced antibacterial activity against S. aureus and E. coli, deriving from the incorporation of ZnO nanoparticles. Furthermore, the material exhibited resistance to organic solvents such as acetone, THF, and toluene. Indeed, the herein developed cellulose/ZnO based bioplastic presents a promising candidate to replace petrochemical plastics in various applications, such as plastic toys, anti-UV guardrails, window shades, and oil storage containers, offering a combination of favorable mechanical, gas barrier, UV-blocking, antibacterial, and solvent-resistant properties.

Living Artificial Skin: Photosensitizer and Cell Sandwiched Bacterial Cellulose for Chronic Wound Healing

Chronic wounds pose a significant global public health challenge due to their suboptimal treatment efficacy caused by bacterial infections and microcirculatory disturbances. Inspired by the biofunctionality of natural skin, an artificial skin (HV@BC@TBG) is bioengineered with bacterial cellulose (BC) sandwiched between photosensitizers (PS) and functionalized living cells. Glucose-modified PS (TBG) and vascular endothelial growth factor (VEGF)-functionalized living cells (HV) are successively modified on each side of BC through biological metabolism and bio-orthogonal reaction. As the outermost layer, the TBG layer can generate reactive oxygen species (ROS) upon light illumination to efficiently combat bacterial infections. The HV layer is the inner layer near the diabetic wound, which servs as a living factory to continuously secrete VEGF to accelerate wound repair by promoting fibroblast proliferation and angiogenesis. The sandwiched structural artificial skin HV@BC@TBG is nontoxic, biocompatible, and demonstrated its ability to significantly accelerate the healing process of infected diabetic wounds, rendering it a promising next-generation medical therapy for chronic wound management.

Cellulose aerogel beads and monoliths from CO2-based reversible ionic liquid solution

The CO2-based reversible ionic liquid solution of 1,1,3,3-tetramethylguanidine (TMG) and ethylene glycol (EG) in dimethyl sulfoxide (DMSO) after capturing CO2, (2[TMGH]+[O2COCH2CH2OCO2]2-/DMSO (χRILs = 0.1), provides a sustainable and effective platform for cellulose dissolution and homogeneous utilization. Highly porous cellulose aerogel beads and monoliths were successfully prepared via a sol-gel process by extruding cellulose solution into different coagulation baths (NaOH aqueous solution or alcohols) and exposing the cellulose solution in open environment, respectively, and followed by different drying techniques, including supercritical CO2-drying, freeze-drying and air-drying. The effect of the coagulation baths and drying protocols on the multi-scale structure of the as-prepared cellulose aerogel beads and monoliths were studied in detail, and the sol-gel transition mechanism was also studied by the solvatochromic parameters determination. High specific surface area of 252 and 207 m2/g for aerogel beads and monoliths were achieved, respectively. The potential of cellulose aerogels in dye adsorption was demonstrated.

Buffer effects on protein sieving losses in ultrafiltration and their relationship to biophysical properties

The design of effective ultrafiltration/diafiltration processes for protein formulation requires the use of membranes with very high protein retention. The objective of this study was to examine the effects of specific buffers on the retention of a model protein (bovine serum albumin) during ultrafiltration. Albumin retention at pH 4.8 was significantly reduced in phosphate buffer compared with that in acetate, citrate, and histidine. This behavior was consistent with a small change in the effective albumin hydrodynamic diameter as determined by dynamic light scattering. The underlying conformational changes leading to this change in diameter were explored using circular dichroism spectroscopy and differential scanning calorimetry. These results provide important insights into the factors controlling protein retention during ultrafiltration and diafiltration.

Reevaluation of the adhesion between cellulose materials using macro spherical beads and flat model surfaces

Interactions between dry cellulose were studied using model systems, cellulose beads, and cellulose films, using custom-built contact adhesion testing equipment. Depending on the configuration of the substrates in contact, Polydimethylsiloxane (PDMS) film, cellulose films spin-coated either on PDMS or glass, the interaction shows three distinct processes. Firstly, molecular interlocking is formed between cellulose and cellulose when there is a soft PDMS thin film backing the cellulose film. Secondly, without backing, no initial attraction force between the surfaces is observed. Thirdly, a significant force increase, ∆F, is observed during the retraction process for cellulose on glass, and there is a maximum in ∆F when the retraction rate is increased. This is due to the kinetics of a contacting process occurring in the interaction zone between the surfaces caused by an interdigitation of a fine fibrillar structure at the nano-scale, whereas, for the spin-coated cellulose surfaces on the PDMS backing, there is a more direct adhesive failure. The results have generated understanding of the interaction between cellulose-rich materials, which helps design new, advanced cellulose-based materials. The results also show the complexity of the interaction between these surfaces and that earlier mechanisms, based on macroscopic material testing, are simply not adequate for molecular tailoring.

Micromorphology reformation of regenerated cellulose nanofibers from corn (Zea Mays) stalk pith in urea solution with high-speed shear induced

Nanocellulose is a kind of renewable natural polymer material with high specific surface area, high crystallinity, and strong mechanical properties. RC nanofibers (RCNFs) have attracted an increasing attention in various applications due to their high aspect ratio and good flexibility. Herein, a novel and facile strategy for RCNFs preparation with high-speed shear induced in urea solution through "bottom-up" approach was proposed in this work. Results indicated that the average diameter and yield of RCNF was approach to 136.67 nm and 53.3 %, respectively. Meanwhile, due to the regular orientation RC chains and arrangement micro-morphology, RCNFs exhibited high crystallinity, strong mechanical properties, stable thermal degradation performance, and excellent UV resistance. In this study, a novel regeneration process with high-speed shear induced was developed to produce RCNFs with excellent properties. This study paved a strategy for future low-energy production of nanofibers and high value-added conversion applications of agricultural waste.

A fresh perspective on dissociation mechanism of cellulose in DMAc/LiCl system based on Li bond theory

In this case, various characterization technologies have been employed to probe dissociation mechanism of cellulose in N,N-dimethylacetamide/lithium chloride (DMAc/LiCl) system. These results indicate that coordination of DMAc ligands to the Li+-Cl- ion pair results in the formation of a series of Lix(DMAc)yClz (x = 1, 2; y = 1, 2, 3, 4; z = 1, 2) complexes. Analysis of interaction between DMAc ligand and Li center indicate that Li bond plays a major role for the formation of these Lix(DMAc)yClz complexes. And the saturation and directionality of Li bond in these Lix(DMAc)yClz complexes are found to be a tetrahedral structure. The hydrogen bonds between two cellulose chains could be broken at the nonreduced end of cellulose molecule via combined effects of basicity of Cl- ion and steric hindrance of [Li (DMAc)4]+ unit. The unique feature of Li bond in Lix(DMAc)yClz complexes is a key factor in determination of the dissociation mechanism.

A review of cellulose-based catechol-containing functional materials for advanced applications

With the increment in global energy consumption and severe environmental pollution, it is urgently needed to explore green and sustainable materials. Inspired by nature, catechol groups in mussel adhesion proteins have been successively understood and utilized as novel biomimetic materials. In parallel, cellulose presents a wide class of functional materials rating from macro-scale to nano-scale components. The cross-over among both research fields alters the introduction of impressive materials with potential engineering properties, where catechol-containing materials supply a general stage for the functionalization of cellulose or cellulose derivatives. In this review, the role of catechol groups in the modification of cellulose and cellulose derivatives is discussed. A broad variety of advanced applications of cellulose-based catechol-containing materials, including adhesives, hydrogels, aerogels, membranes, textiles, pulp and papermaking, composites, are presented. Furthermore, some critical remaining challenges and opportunities are studied to mount the way toward the rational purpose and applications of cellulose-based catechol-containing materials.

Influence of the coagulation bath on the nanostructure of cellulose films regenerated from an ionic liquid solution

Cellulose membranes were prepared from an EMIMAc ionic liquid solution by nonsolvent-induced phase separation (NIPS) in coagulation baths of water-acetone mixtures, ethanol-water mixtures and water at different temperatures. High water volume fractions in the coagulation bath result in a highly reproducible gel-like structure with inhomogeneities observed by small-angle neutron scattering (SANS). A structural transition of cellulose takes place in water-acetone baths at very low water volume fractions, while a higher water bath temperature increases the size of inhomogeneities in the gel-like structure. These findings demonstrate the value of SANS for characterising and understanding the structure of regenerated cellulose films in their wet state. Such insights can improve the engineering and structural tuning of cellulose membranes, either for direct use or as precursors for carbon molecular sieve membranes.

High-substituted hydroxypropyl cellulose prepared by homogeneous method and its clouding and self-assembly behaviors

Hydroxypropyl cellulose (HPC) is a sustainable cellulose derivative valued for its excellent biocompatibility and solubility and is widely used in various fields. Recent scientific research on high-substituted HPC mainly focused on its efficient preparation and phase transition behavior. Herein, a novel strategy of high-substituted HPC synthesis was demonstrated by employing DMSO/TBAF·3H2O as a cellulose solvent, exhibiting more efficiency than traditional approaches. High-substituted HPC prepared has remarkable thermal stability, exceptional hydrophilicity, and satisfactory solubility. Phase transition behavior of HPC with varying molar degrees of substitution (MS) was delved and a notable negative correlation between MS and cloud point temperature (TCP), was revealed, particularly evident at an MS of 12.3, where the TCP drops to 33 °C. Moreover, a unique self-assembly behavior featuring structural color and responsiveness to force in a solvent-free environment emerged when the MS exceeded 10.4. These insights comprehensively strengthen the understanding and knowledge of high-substituted HPC, simultaneously paving the way for further HPC investigation and exploitation.

Catalytic activity of Cu2O nanoparticles supported on cellulose beads prepared by emulsion-gelation using cellulose/LiBr solution and vegetable oil

Nanocatalysts tend to aggregate and are difficult to recycle, limiting their practical applications. In this study, an environmentally friendly method was developed to produce cellulose beads for use as supporting materials for Cu-based nanocatalysts. Cellulose beads were synthesized from a water-in-oil emulsion using cellulose dissolved in an LiBr solution as the water phase and vegetable oil as the oil phase. Upon cooling, the gelation of the cellulose solution produced spherical cellulose beads, which were then oxidized to introduce surface carboxyl groups. These beads (diameter: 95-105 μm; specific surface area: 165-225 m2 g-1) have a three-dimensional network of nanofibers (width: 20-30 nm). Furthermore, the Cu2O nanoparticles were loaded onto oxidized cellulose beads before testing their catalytic activity in the reduction of 4-nitrophenol using NaBH4. The apparent reaction rate constant increased with increasing loading of Cu2O nanoparticles and the conversion efficiency was >90 %. The turnover frequency was 376.2 h-1 for the oxidized cellulose beads with the lowest Cu2O loading, indicating a higher catalytic activity compared to those of other Cu-based nanoparticle-loaded materials. In addition to their high catalytic activity, the cellulose beads are reusable and exhibit excellent stability.

Efficient fabrication of anisotropic regenerated cellulose films from bamboo via a facile wet extrusion strategy

Bamboo, featuring fast growth rate and high cellulose content, is considered to be one of the most attractive feedstocks for degradable bio-materials as a substitute for plastics. However, those was limited to the fields of bamboo structural materials mainly by physical processes. Herein, we report a facile continuous wet extrusion strategy for scalable manufacturing of anisotropic regenerated cellulose films in alkali/urea aqueous solution for the first time. The bamboo cellulose solution was regenerated in H2SO4/Na2SO4/ZnSO4 aqueous solution to facilitate the construction of dense fibrils networks. Moreover, under the synergistic effect of shear orientations and stretching processes in wet extrusion molding, the cellulose networks promoted further orientated assembly into aligned fibrils. Therefore, these anisotropic cellulose hydrogels exhibited good mechanical properties, and the tensile strength was increased from 1.67 MPa of anisotropic cellulose hydrogel with 1.0 of stretching ration (ACH-1.0) to 2.13 MPa of ACH-1.4 with increasing stretching ratio from 1.0 to 1.4, which was about 1.34 times higher than that of the isotropic hydrogel fabricated by tape-casting. Moreover, ACH-1.4 exhibited commendable thermal stability and air barrier properties. This work demonstrated a simple and continuous bottom-up approach for fabrication of anisotropic bamboo-based cellulose hydrogels and films with excellent mechanical properties.

A state-of-the-art review on plant-derived cellulose-based green hydrogels and their multifunctional role in advanced biomedical applications

The most prevalent carbohydrate on Earth is cellulose, a polysaccharide composed of glucose units that may be found in diverse sources, such as cell walls of wood and plants and some bacterial and algal species. The inherent availability of this versatile material provides a natural pathway for exploring and identifying novel uses. This study comprehensively analyzes cellulose and its derivatives, exploring their structural and biochemical features and assessing their wide-ranging applications in tissue fabrication, surgical dressings, and pharmaceutical delivery systems. The use of diverse cellulose particles as fundamental components gives rise to materials with distinct microstructures and characteristics, fulfilling the requirements of various biological applications. Although cellulose boasts substantial potential across various sectors, its exploration has predominantly unfolded within industrial realms, leaving the biomedical domain somewhat overlooked in its initial stages. This investigation, therefore, endeavors to shed light on the contemporary strides made in synthesizing cellulose and its derivatives. These innovative techniques give rise to distinctive attributes, presenting a treasure trove of advantages for their compelling integration into the intricate tapestry of biomedical applications.

Flexible cellulose nanofibers/MXene composite films for UV-shielding packaging

Cellulose nanofibers (CNF) based films are promising packaging materials, but the lack of special functions (especially UV-shielding property) usually restrict their further applications. In this work, MXene was incorporated into the CNF film by a direct solvent volatilization induced film forming method to study its UV-shielding property for the first time, which avoided the using of a vacuum filtration equipment. The composite films containing glycerin could be folded repeatedly without breaking, showing good flexibility. The structure and properties of MXene/CNF composite films (CMF) were characterized systematically. The results showed that MXene distributed uniformly in the CNF film matrix and there was strong hydrogen bonding interaction between CNF and MXene. The tensile strength and Young's modulus of the composite films could reach 117.5 MPa and 2.23 GPa, which was 54.1 % and 59.2 % higher than those of pure CNF film, respectively. With the increase of MXene content, both the UVA and UVB shielding percentages increased significantly from 17.2 % and 25.5 % to 100.0 %, showing excellent UV-shielding property. Moreover, CMF exhibited a low oxygen permeability (OP) value of 0.39 cc μm d-1 m-2 kPa-1, a low water vapor permeability (WVP) value of 5.13 × 10-11 g-1s-1Pa-1 and a high antibacterial rate against E. coli (94.1 % at 24 h), showing potential application in the packaging field.

Tailoring Hydronium ion Driven Dissociation-Chemical Cross-Linking for Superfast One-Pot Cellulose Dissolution and Derivatization to Build Robust Cellulose Films

Concepts of sustainability must be developed to overcome the increasing environmental hazards caused by fossil resources. Cellulose derivatives with excellent properties are promising biobased alternatives for petroleum-derived materials. However, a one-pot route to achieve cellulose dissolution and derivatization is very challenging, requiring harsh conditions, high energy consumption, and complex solubilizing. Herein, we design a one-pot tailoring hydronium ion driven dissociation-chemical cross-linking strategy to achieve superfast cellulose dissolution and derivatization for orderly robust cellulose films. In this strategy, there is a powerful driving force from organic acid with a pKa below 3.75 to dissociate H+ and trigger the dissolution and derivatization of cellulose under the addition of H2SO4. Nevertheless, the driving force can only trigger a partial swelling of cellulose but without dissolution when the pKa of organic acid is above 4.26 for the dissociation of H+ is inhibited by the addition of inorganic acid. The cellulose film has high transmittance (up to ∼90%), excellent tensile strength (∼122 MPa), and is superior to commercial PE film. Moreover, the tensile strength is increased by 400% compared to cellulose film prepared by the ZnCl2 solvent. This work provides an efficient solvent, which is of great significance for emerging cellulose materials from renewable materials.

pH-Responsive Cellulose/Silk/Fe3O4 Hydrogel Microbeads Designed for Biomedical Applications

In this study, cellulose/Fe3O4 hydrogel microbeads were prepared through the sol-gel transition of a solvent-in-oil emulsion using various cellulose-dissolving solvents and soybean oil without surfactants. Particularly, 40% tetrabutylammonium hydroxide (TBAH) and 40% tetrabutylphosphonium hydroxide (TBPH) dissolved cellulose at room temperature and effectively dispersed Fe3O4, forming cellulose/Fe3O4 microbeads with an average diameter of ~15 µm. Additionally, these solvents co-dissolved cellulose and silk, allowing for the manufacture of cellulose/silk/Fe3O4 hydrogel microbeads with altered surface characteristics. Owing to the negatively charged surface characteristics, the adsorption capacity of the cellulose/silk/Fe3O4 microbeads for the cationic dye crystal violet was >10 times higher than that of the cellulose/Fe3O4 microbeads. When prepared with TBAH, the initial adsorption rate of bovine serum albumin (BSA) on the cellulose/silk/Fe3O4 microbeads was 18.1 times higher than that on the cellulose/Fe3O4 microbeads. When preparing TBPH, the equilibrium adsorption capacity of the cellulose/silk/Fe3O4 microbeads for BSA (1.6 g/g) was 8.5 times higher than that of the cellulose/Fe3O4 microbeads. The pH-dependent BSA release from the cellulose/silk/Fe3O4 microbeads prepared with TBPH revealed 6.1-fold slower initial desorption rates and 5.2-fold lower desorption amounts at pH 2.2 than those at pH 7.4. Cytotoxicity tests on the cellulose and cellulose/silk composites regenerated with TBAH and TBPH yielded nontoxic results. Therefore, cellulose/silk/Fe3O4 microbeads are considered suitable pH-responsive supports for orally administered protein pharmaceuticals.

A novel approach to analyze the impact of lytic polysaccharide monooxygenases (LPMOs) on cellulosic fibres

Enzymatic treatment of cellulosic fibres is a green alternative to classical chemical modification. For many applications, mild procedures for cellulose alteration are sufficient, in which the fibre structure and, therefore, the mechanical performance of cellulosic fibres are preserved. Lytic polysaccharide monooxygenases (LPMOs) bear a great potential to become a green reagent for such targeted cellulose modifications. An obstacle for wide implementation of LPMOs in tailored cellulose chemistry is the lack of suitable techniques to precisely monitor the LPMO impact on the polymer. Soluble oxidized cello-oligomers can be quantified using chromatographic and mass-spectrometric techniques. A considerable portion of the oxidized sites, however, remain on the insoluble cellulose fibres, and their quantification is difficult. Here, we describe a method for the simultaneous quantification of oxidized sites on cellulose fibres and changes in their molar mass distribution after treatment with LPMOs. The method is based on quantitative, heterogeneous, carbonyl-selective labelling with a fluorescent label (CCOA) followed by cellulose dissolution and size-exclusion chromatography (SEC). Application of the method to reactions of seven different LPMOs with pure cellulose fibres revealed pronounced functional differences between the enzymes, showing that this CCOA/SEC/MALS method is a promising tool to better understand the catalytic action of LPMOs.

Aesthetic Cellulose Filaments with Water-Triggered Switchable Internal Stress and Customizable Polarized Iridescence Toward Green Fashion Innovation

Healthy, convenient, and aesthetic hair dyeing and styling are essential to fashion trends and personal-social interactions. Herein, we fabricate green, scalable, and aesthetic regenerated cellulose filaments (ACFs) with customizable iridescent colors, outstanding mechanical properties, and water-triggered moldability for convenient and fashionable artificial hairdressing. The fabrication of ACFs involves cellulose dissolution, cross-linking, wet-spinning, and nanostructured orientation. Notably, the cross-linking strategy endows the ACFs with significantly weakened internal stress, confirmed by monitoring the offset of the C-O-C group in the cellulose molecular chain with Raman imaging, which ensures a tailorable orientation of the nanostructure during wet stretching and tunable iridescent polarization colors. Interestingly, ACFs can be tailored for three-dimensional shaping through a facile water-triggered adjustable internal stress: temporary shaping with low-level internal stress in the wet state and permanent shaping with high-level internal stress in the dry state. The health, convenience, and green aesthetic filaments show great potential in personal wearables.

Insight into the Feasibility of Fatty Acyl Chlorides with 10-18 Carbons for the Ball-Milling Synthesis of Thermoplastic Cellulose Esters

Fatty acid cellulose esters (FACE) are common cellulose-based thermoplastics, and their thermoplasticity is determined by both the contents and the lengths of the side chains. Herein, various FACE were synthesized by the ball-milling esterification of cellulose and fatty acyl chlorides containing 10-18 carbons, and their structures and thermoplasticity were thoroughly studied. The results showed that FACE with high degrees of substitution (DS) and low melting flow temperatures (Tf) were achieved as the chain lengths of the fatty acyl chlorides were reduced. In particular, a cellulose decanoate with a DS of 1.85 and a Tf of 186 °C was achieved by feeding 3 mol of decanoyl chloride per mole anhydroglucose units of cellulose. However, cellulose stearate (DS = 1.53) synthesized by the same protocols cannot melt even at 250 °C. More interestingly, the fatty acyl chlorides with 10 and 12 carbons resulted in FACE with superior toughness (elongation at break up to 94.4%). In contrast, due to their potential crystallization of the fatty acyl groups with 14-18 carbons, the corresponding FACE showed higher tensile strength and Young's modulus than the others. This study provides some theoretical basis for the mechanochemical synthesis of thermoplastic FACE with designated properties.

Biopolymers for Hygroscopic Material Development

The effective management of atmospheric water will create huge value for mankind. Diversified and sustainable biopolymers that are derived from organisms provide rich building blocks for various hygroscopic materials. Here, a comprehensive review of recent advances in developing biopolymers for hygroscopic materials is provided. It is begun with a brief introduction of species diversity and the processes of obtaining various biopolymer materials from organisms. The fabrication of hygroscopic materials is then illustrated, with a specific focus on the use of biopolymer-derived materials as substrates to produce composites and the use of biopolymers as building blocks to fabricate composite gels. Next, the representative applications of biopolymer-derived hygroscopic materials for dehumidification, atmospheric water harvesting, and power generation are systematically presented. An outlook on future challenges and key issues worthy of attention are finally provided.

Efficient dissolution of cellulose in slow-cooling alkaline systems and interacting modes between alkali and urea at the molecular level

The dissolution of microcrystalline cellulose (MCC) in a urea-NaOH system is beneficial for its mechanical processing. The apparent MCC solubility was greatly improved to 14 wt% under a slow-cooling condition with a cooling rate of -0.3 °C/min. The cooling curve or thermal history played a crucial role in the dissolution process. An exotherm (-54.7 ± 3 J/g MCC) was detected by DSC only under the slow-cooling condition, and the cryogenic dissolution of MCC was attributed to the exothermic interaction between MCC and solvent. More importantly, the low cooling rate promoted the dissolution of MCC by providing enough time for the diffusion of OH- and urea into MCC granules at higher temperatures. The Raman spectral data showed that the intramolecularly and intermolecularly hydrogen bonds in cellulose were cleaved by NaOH and urea, respectively. XPS and solid-state 13C NMR results showed that hydrogen bonds were generated after dissolution, and a dual-hydrogen-bond binding mode between urea and cellulose was confirmed by DFT calculations. Both the decrease of enthalpy and increase of entropy dominated the spontaneity of MCC dissolution, and that is the reason for the indispensability of cryogenic environment. The high apparent solubility of MCC in the slow-cooling process and the dissolution mechanism are beneficial for the studies on cellulose modification and mechanical processing.

Sustainable Cellulose-Derived Organic Photonic Gels with Tunable and Dynamic Structural Color

Structural color is a fascinating optical phenomenon arising from intricate light-matter interactions. Biological structural colors from natural polymers are invaluable in biomimetic design and sustainable construction. Here, we report a renewable, abundant, and biodegradable cellulose-derived organic gel that generates stable cholesteric liquid crystal structures with vivid structural colors. We construct the chromatic gel using a 68 wt % hydroxypropyl cellulose (HPC) matrix, incorporating distinct polyethylene glycol (PEG) guest molecules. The PEGs contain peculiar end groups with tailored polarity, allowing for precise positioning on the HPC helical backbone through electrostatic repulsion between the PEG and HPC chains. This preserves the HPC's chiral nematic phase without being disrupted. We demonstrate that the PEGs' polarity tunes the HPC gel's reflective color. Additionally, gels with variable polarities are highly sensitive to temperature, pressure, and stretching, resulting in rapid, continuous, and reversible color changes. These exceptional dynamic traits establish the chiral nematic gel as an outstanding candidate for next-generation applications across displays, wearables, flexible electronics, health monitoring, and multifunctional sensors.

Hollow Filaments from Coaxial Dry-Jet Wet Spinning of a Cellulose Solution in an Ionic Liquid: Wet-Strength and Water Interactions

Hollow tubing and tubular filaments are highly relevant to membrane technologies, vascular tissue engineering, and others. In this context, we introduce hollow filaments (HF) produced through coaxial dry-jet wet spinning of cellulose dissolved in an ionic liquid ([emim][OAc]). The HF, developed upon regeneration in water (23 °C), displays superior mechanical performance (168 MPa stiffness and 60% stretchability) compared to biobased counterparts, such as those based on collagen. The results are rationalized by the effects of crystallinity, polymer orientation, and other factors associated with rheology, thermal stability, and dynamic vapor sorption. The tensile strength and strain of the HF (dry and wet) are enhanced by drying and wetting cycles (water vapor sorption and desorption experiments). Overall, we unveil the role of water molecules in the wet performance of HF produced by cellulose regeneration from [emim][OAc], which offers a basis for selecting suitable applications.

Force-Induced Alignment of Nanofibrillated Bacterial Cellulose for the Enhancement of Cellulose Composite Macrofibers

Bacterial cellulose, as an important renewable bioresource, exhibits excellent mechanical properties along with intrinsic biodegradability. It is expected to replace non-degradable plastics and reduce severe environmental pollution. In this study, using dry jet-wet spinning and stretching methods, we fabricate cellulose composite macrofibers using nanofibrillated bacterial cellulose (BCNFs) which were obtained by agitated fermentation. Ionic liquid (IL) was used as a solvent to perform wet spinning. In this process, force-induced alignment of BCNFs was applied to enhance the mechanical properties of the macrofibers. The results of scanning electron microscopy revealed the well-aligned structure of BCNF along the fiber axis. The fiber prepared with an extrusion rate of 30 m min-1 and a stretching ratio of 46% exhibited a strength of 174 MPa and a Young's modulus of 13.7 GPa. In addition, we investigated the co-spinning of carboxymethyl cellulose-containing BCNF with chitosan using IL as a "container", which indicated the compatibility of BCNFs with other polysaccharides. Recycling of the ionic liquid was also verified to validate the sustainability of our strategy. This study provides a scalable method to fabricate bacterial cellulose composite fibers, which can be applied in the textile or biomaterial industries with further functionalization.

Photocrosslinkable Cellulose Derivatives for the Manufacturing of All-Cellulose-Based Architectures

Replacing petroleum-based polymers with biopolymers such as polysaccharides is essential for protecting our environment by saving fossil resources. A research field that can benefit from the application of more sustainable and renewable materials is photochemistry. Therefore, cellulose-based photoresists that could be photocrosslinked via UV irradiation (λ = 254 nm and λ = 365 nm) were developed. These biogenic polymers enable the manufacturing of sustainable coatings, even with imprinted microstructures, and cellulose-based bulk materials. Thus, herein, cellulose was functionalized with organic compounds containing carbon double bonds to introduce photocrosslinkable side groups directly onto the cellulose backbone. Therefore, unsaturated anhydrides such as methacrylic acid anhydride and unsaturated and polyunsaturated carboxylic acids such as linoleic acid were utilized. Additionally, these cellulose derivatives were modified with acetate or tosylate groups to generate cellulose-based polymers, which are soluble in organic solvents, making them suitable for multiple processing methods, such as casting, printing and coating. The photocurable resist was basically composed of the UV-crosslinkable biopolymer, an appropriate solvent and, if necessary, a photoinitiator. Moreover, these bio-based photoresists were UV-crosslinkable in the liquid and solid states after the removal of the solvent. Further, the manufactured cellulose-based architectures, even the bulk structures, could be entirely regenerated into pure cellulose devices via a sodium methoxide treatment.

Microscopic dissolution process of cellulose in alkaline aqueous solvents and its application in CNFs extraction - Investigating temperature as a variable

The target of this study is to gain a deeper understanding of the micro-dissolution process of cellulose in alkaline aqueous solutions and to develop a novel method for extracting cellulose nanofibrils (CNFs). Herein, the dissolution process of cellulose in alkaline aqueous solutions will be controlled by varying the temperature, and the undissolved cellulose will be analyzed to reveal the microscopic dissolution process of cellulose, and a novel process for extracting cellulose nanofibrils (CNFs) will be developed based on the findings. The crystalline structure of cellulose was gradually disrupted as the dissolution progressed, and the crystal form of cellulose changed gradually from cellulose I to cellulose II during the dissolution process, while all undissolved cellulose crystals remained as cellulose I. Cellulose, after its structure is disrupted during the dissolution process, will inevitably decompose into CNFs, and the microscopic dissolution process of cellulose follows a "top-down" dissolution sequence. The CNFs extraction method developed in this study can extract CNFs with high yield (>60 %) in a stable manner, as well as narrow particle size distribution, high crystallinity (>77 %), and good thermal stability. This study enhances the comprehension of the dissolution process of cellulose and paves a possible way for industrialization of CNFs production.

The reduce of water vapor permeability of polysaccharide-based films in food packaging: A comprehensive review

Polysaccharide-based films are favored in the food packaging industry because of their advantages of green and safe characters, as well as natural degradability, but due to the structural defects of polysaccharides, they also have the disadvantages of high water vapor permeability (WVP), which greatly limits their application in the food packaging industry. To break the limitation, numerous methods, e.g., physical and/or chemical methods, have been employed. This review mainly elaborates the up-to-date research status of the application of polysaccharide-based films (PBFs) in food packaging area, including various films from cellulose and its derivatives, starch, chitosan, pectin, alginate, pullulan and so on, while the methods of reducing the WVP of PBFs, mainly divided into physical and chemical methods, are summarized, as well as the discussions about the existing problems and development trends of PBFs. In the end, suggestions about the future development of WVP of PBFs are presented.

A novel structural design of cellulose-based conductive composite fibers for wearable e-textiles

Cellulose-based conductive composite fibers hold great promise in smart wearable applications, given cellulose's desirable properties for textiles. Blending conductive fillers with cellulose is the most common means of fiber production. Incorporating a high content of conductive fillers is demanded to achieve desirable conductivity. However, a high filler load deteriorates the processability and mechanical properties of the fibers. Here, developing wet-spun cellulose-based fibers with a unique side-by-side (SBS) structure via sustainable processing is reported. Sustainable sources (cotton linter and post-consumer cotton waste) and a biocompatible intrinsically conductive polymer (i.e., polyaniline, PANI) were engineered into fibers containing two co-continuous phases arranged side-by-side. One phase was neat cellulose serving as the substrate and providing good mechanical properties; another phase was a PANI-rich cellulose blend (50 wt%) affording electrical conductivity. Additionally, an eco-friendly LiOH/urea solvent system was adopted for the fiber spinning process. With the proper control of processing parameters, the SBS fibers demonstrated high conductivity and improved mechanical properties compared to single-phase cellulose and PANI blended fibers. The SBS fibers demonstrated great potential for wearable e-textile applications.

On the Mechanism of the Ionizing Radiation-Induced Degradation and Recycling of Cellulose

The use of ionizing radiation offers a boundless range of applications for polymer scientists, from inducing crosslinking and/or degradation to grafting a wide variety of monomers onto polymeric chains. This review in particular aims to introduce the field of ionizing radiation as it relates to the degradation and recycling of cellulose and its derivatives. The review discusses the main mechanisms of the radiolytic sessions of the cellulose molecules in the presence and absence of water. During the radiolysis of cellulose, in the absence of water, the primary and secondary electrons from the electron beam, and the photoelectric, Compton effect electrons from gamma radiolysis attack the glycosidic bonds (C-O-C) on the backbone of the cellulose chains. This radiation-induced session results in the formation of alkoxyl radicals and C-centered radicals. In the presence of water, the radiolytically produced hydroxyl radicals (●OH) will abstract hydrogen atoms, leading to the formation of C-centered radicals, which undergo various reactions leading to the backbone session of the cellulose. Based on the structures of the radiolytically produced free radicals in presence and absence of water, covalent grafting of vinyl monomers on the cellulose backbone is inconceivable.

Development of an Aerogel-Based Wet Electrode for Functional Electrical Stimulation

Functional electrical stimulation (FES) has been a useful therapeutic tool in rehabilitation, particularly for people with paralysis. To deliver stimulation in its most basic setup, a stimulator and at least a pair of electrodes are needed. The electrodes are an essential part of the system since they allow the transduction of the stimulator signals into the body. Their performance can influence the experience of both patient and therapist in terms of movement generation, comfort, and ease of use. For non-invasive surface stimulation, current electrode options have several limitations involving their interfacing with the skin, practical inconveniences, and short-term functionality. Standard hydrogel electrodes tend to lose their adhesion with the skin quickly, while dry or textile electrodes require constant wetting to be comfortable. In this paper, we present the fabrication, characterization, and FES testing of a new aerogel-based wet electrode for surface stimulation applications for long-term and reusable FES applications. We investigated its functionality by stimulating the biceps brachii of twelve healthy individuals and collected elbow joint torque and comfort ratings for three different intensity levels (low, moderate, and high) of FES. Comparing to standard hydrogel electrodes, no statistically significant difference was found for any intensity of stimulation in either torque or comfort. Overall, the new aerogel-based electrode has an appropriate impedance, is flexible and soft, is conformable to the skin, has a high water absorption and retention, and can be used for FES purposes.

A review on recent advances towards sustainable development of bio-inspired agri-waste based cellulose aerogels

Cellulose aerogel (CA) is considered to be the most promising material due to its extraordinary properties like unique microstructure, porosity, large specific surface area, biodegradability, renewable nature and lightweight. Cellulosic aerogels are thus found to have potential applications in different fields especially in water purification and biomedical field. Agricultural waste based cellulose aerogels are recently getting wider attention owing to its sustainability. The synthesis methods of agri-waste based cellulose aerogels, its properties and application in different fields especially in the field of water purification are detailed in a comprehensive manner. This review tries to bring light into the commercialization of value-added products from sustainable, cheap agricultural waste material and tries to motivate young researchers.

Dissolution mechanism of cellulose in a benzyltriethylammonium/urea deep eutectic solvent (DES): DFT-quantum modeling, molecular dynamics and experimental investigation

In this paper, a benzyltriethylammonium/urea DES was investigated as a new green and eco-friendly medium for the progress of organic chemical reactions, particularly the dissolution and the functionalization of cellulose. In this regard, the viscosity-average molecular weight of cellulose (M̄w) during the dissolution/regeneration process was investigated, showing no significant degradation of the polymer chains. Moreover, X-ray diffraction patterns indicated that the cellulose dissolution process in the BTEAB/urea DES decreased the crystallinity index from 87% to 75%, and there was no effect on type I cellulose polymorphism. However, a drastic impact of the cosolvents (water and DMSO) on the melting point of the DES was observed. Besides, to understand the evolution of cellulose-DES interactions, the formation mechanism of the system was studied in terms of H-bond density and radial distribution function (RDF) using molecular dynamics modeling. Furthermore, density functional theory (DFT) was used to evaluate the topological characteristics of the polymeric system such as potential energy density (PED), laplacian electron density (LED), energy density, and kinetic energy density (KED) at bond critical points (BCPs) between the cellulose and the DES. The quantum theory of atoms in molecules (AIM), Bader's quantum theory (BQT), and reduced density gradient (RDG) scatter plots have been exploited to estimate and locate non-covalent interactions (NCIs). The results revealed that the dissolution process is attributed to the physical interactions, mainly the strong H-bond interactions.

A novel method to prepare water-soluble cellulose-based fluorescent probes for highly sensitive and selective detection and removal of Hg2+/Hg22+ ions

Improving the water solubility of natural product cellulose and using it to treat heavy metal ions is very important. In this work, cellulose-based fluorescent probes containing BODIPY fluorophore were synthesized by simple chemical method, which realized the selective recognition and removal of Hg2+/Hg22+ ions in an aqueous system. Firstly, fluorescent small molecule (BOK-NH2) bearing -NH2 group was synthesized through Knoevenagel condensation reaction between BO-NH2 and cinnamaldehyde. Secondly, via the etherification of -OH on the cellulose, substituents bearing -C ≡ CH groups with different lengths at the end are grafted on the cellulose. Finally, cellulose-based probes (P1, P2, and P3) were prepared by amino-yne click reaction. The solubility of cellulose is improved greatly, especially the cellulose derivative with branched long chains has excellent solubility in water (P3). Benefiting from the improved solubility, P3 could be processed into solutions, films, hydrogels, and powders. Upon the addition of Hg2+/Hg22+ ions, the fluorescence intensity enhanced, which are "turn-on" probes. At the same time, the probes could be utilized as efficient adsorbents for Hg2+/Hg22+ ions. The removal efficiency of P3 for Hg2+/Hg22+ is 79.7 %/82.1 %, and the adsorption capacity is 159.4 mg·g-1/164.2 mg·g-1. These cellulose-based probes are expected to be employed in the treatment of polluted environments.

Biological Macromolecule-Based Scaffolds for Urethra Reconstruction

Urethral reconstruction strategies are limited with many associated drawbacks. In this context, the main challenge is the unavailability of a suitable tissue that can endure urine exposure. However, most of the used tissues in clinical practices are non-specialized grafts that finally fail to prevent urine leakage. Tissue engineering has offered novel solutions to address this dilemma. In this technology, scaffolding biomaterials characteristics are of prime importance. Biological macromolecules are naturally derived polymers that have been extensively studied for various tissue engineering applications. This review discusses the recent advances, applications, and challenges of biological macromolecule-based scaffolds in urethral reconstruction.

Recent Advances in Cellulose-Based Hydrogels Prepared by Ionic Liquid-Based Processes

This review summarizes the recent advances in preparing cellulose hydrogels via ionic liquid-based processes and the applications of regenerated cellulose hydrogels/iongels in electrochemical materials, separation membranes, and 3D printing bioinks. Cellulose is the most abundant natural polymer, which has attracted great attention due to the demand for eco-friendly and sustainable materials. The sustainability of cellulose products also depends on the selection of the dissolution solvent. The current state of knowledge in cellulose preparation, performed by directly dissolving in ionic liquids and then regenerating in antisolvents, as described in this review, provides innovative ideas from the new findings presented in recent research papers and with the perspective of the current challenges.

Highly transparent, hydrophobic, and durable anisotropic cellulose films as electronic screen protectors

Cellulose films have attracted extensive interest in the field of burgeoning electronic devices. However, it remains a challenge to simultaneously address the difficulties including facile methodology, hydrophobicity, optical transparency, and mechanical robustness. Herein, we reported a coating-annealing approach to fabricate highly transparent, hydrophobic, and durable anisotropic cellulose films, where poly(methyl methacrylate)-b-poly(trifluoroethyl methacrylate) (PMMA-b-PTFEMA) as low surface energy chemicals was coated onto regenerated cellulose films via physical (hydrogen bonds) and chemical (transesterification) interactions. The resultant films with nano-protrusions and low surface roughness exhibited high optical transparency (92.3 %, 550 nm) and good hydrophobicity. Moreover, the tensile strength of the hydrophobic films was 198.7 MPa and 124 MPa in dry and wet states, respectively, which also showed excellent stability and durability under various conditions, such as hot water, chemicals, liquid foods, tape peeling, finger pressing, sandpaper abrasion, ultrasonic treatment, and water jet. This work provided a promising large-scale production strategy for the preparation of transparent and hydrophobic cellulose-based films for electronic device protection as well as other emerging flexible electronics.

Nanoparticle Synthesis and Their Integration into Polymer-Based Fibers for Biomedical Applications

The potential of nanoparticles as effective drug delivery systems combined with the versatility of fibers has led to the development of new and improved strategies to help in the diagnosis and treatment of diseases. Nanoparticles have extraordinary characteristics that are helpful in several applications, including wound dressings, microbial balance approaches, tissue regeneration, and cancer treatment. Owing to their large surface area, tailor-ability, and persistent diameter, fibers are also used for wound dressings, tissue engineering, controlled drug delivery, and protective clothing. The combination of nanoparticles with fibers has the power to generate delivery systems that have enhanced performance over the individual architectures. This review aims at illustrating the main possibilities and trends of fibers functionalized with nanoparticles, focusing on inorganic and organic nanoparticles and polymer-based fibers. Emphasis on the recent progress in the fabrication procedures of several types of nanoparticles and in the description of the most used polymers to produce fibers has been undertaken, along with the bioactivity of such alliances in several biomedical applications. To finish, future perspectives of nanoparticles incorporated within polymer-based fibers for clinical use are presented and discussed, thus showcasing relevant paths to follow for enhanced success in the field.

Extended Ensemble Molecular Dynamics Study of Ammonia-Cellulose I Complex Crystal Models: Free-Energy Landscape and Atomistic Pictures of Ammonia Diffusion in the Crystalline Phase

Here, we report extended ensemble molecular dynamics simulations of ammonia-cellulose I complex crystal models to evaluate the diffusion behavior of the guest ammonia molecules and the potential of mean force (PMF), namely, the free energy change along the chosen reaction coordinate, for migration of an ammonia molecule in the crystal models. Accelerated molecular dynamics simulations confirmed that ammonia molecules almost exclusively diffused through the hydrophilic channel even when the crystal framework was retained. Adaptive steered molecular dynamics simulations detected distinct PMF peaks with heights of approximately 7 kcal/mol as the ammonia molecule passed through the cellulose-chain layers. Introducing hybrid quantum mechanical and molecular mechanics theory to the adaptive steered molecular dynamics simulation effectively lowered the heights of the PMF peaks to approximately 5 kcal/mol, accompanied by a slight decrease in the baseline. Removal of the ammonia molecules in the neighboring channels resulted in a continuous increase in the baseline for the migration of an ammonia molecule in the hydrophilic channel. When the halves of the crystal model were separated to widen the hydrophilic channel to 0.2 nm, the PMF profiles exhibited an unexpected increase. This resulted from water structuring in the expanded hydrophilic channel, which disappeared with further expansion of the hydrophilic channel to 0.3 nm.

Biosynthesis of cellulose from Ulva lactuca, manufacture of nanocellulose and its application as antimicrobial polymer

Green nanotechnology has recently been recognized as a more proper and safer tool for medical applications thanks to its natural reductions with low toxicity and avoidance of injurious chemicals. The macroalgal biomass was used for nanocellulose biosynthesis. Algae are abundant in the environment and have a high content of cellulose. In our study, we extracted parent cellulose from Ulva lactuca where consecutive treatments extracted cellulose to obtain an insoluble fraction rich in cellulose. The extracted cellulose has the same results obtained by matching it with reference cellulose, especially the same Fourier transform infrared (FTIR) and X-Ray diffraction (XRD) analysis peaks. Nanocellulose was synthesized from extracted cellulose with hydrolysis by sulfuric acid. Nanocellulose was examined by Scanning electron microscope (SEM) shown by a slab-like region as Fig. 4a and Energy dispersive X-ray (EDX) to examine the chemical composition. The size of nanocellulose in the range of 50 nm is calculated by XRD analysis. Antibacterial examination of nanocellulose was tested against Gram+ bacteria like Staphylococcus aureus (ATCC6538), Klebsiella pneumonia (ST627), and Gram-negative bacteria such as Escherichia coli (ATCC25922), and coagulase-negative Staphylococci (CoNS) to give 4.06, 4.66, 4.93 and 4.43 cm as respectively. Comparing the antibacterial effect of nanocellulose with some antibiotics and estimating minimal Inhibitory Concentration (MIC) of nanocellulose. We tested the influence of cellulose and nanocellulose on some fungi such as Aspergillus flavus, Candida albicans, and Candida tropicalis. These results demonstrate that nanocellulose could be developed as an excellent solution to these challenges, making nanocellulose extracted from natural algae a very important medical material that is compatible with sustainable development.

Antimicrobial and Antioxidant Edible Films and Coatings in the Shelf-Life Improvement of Chicken Meat

Meat deterioration during processing, distribution, and display can compromise the quality and safety of products, causing several undesirable changes and decreasing products' shelf-life, which has a negative impact on the industry and consumers. In recent years, studies have been carried out using decontamination techniques and new packaging methodologies to overcome deterioration problems, increase sustainability, and reduce waste. Edible films and coatings obtained from biopolymers such as polysaccharides, proteins, and lipids, combined with active compounds, can be an alternative approach. This article focused on recent studies that used alternative biodegradable polymeric matrices in conjunction with natural compounds with antioxidant/antimicrobial activity on chicken meat. Its impact on physicochemical, microbiological, and sensory characteristics was evident, as well as the effect on its shelf-life. In general, different combinations of active edible films or coatings had a positive effect on the chicken meat. Different studies reported that the main results were a decrease in microbial growth and pathogen survival, a slowdown in lipid oxidation evolution, and an improvement in sensory quality and shelf-life (an increase from 4 to 12 days).

High-performance dielectric film capacitors based on cellulose/Al2O3 nanosheets/PVDF composites

The design and preparation of novel renewable biomass-based dielectric composites have drawn great attention recently. Here, cellulose was dissolved in NaOH/urea aqueous solution, and Al₂O₃ nanosheets (AONS) synthesized by hydrothermal method were used as fillers. Then the regenerated cellulose (RC)-AONS dielectric composite films were prepared by regeneration, washing and drying. The two-dimensional AONS had a better effect on improving the dielectric constant and breakdown strength of the composites, so that the RC-AONS composite film with 5 wt% AONS content reached an energy density of 6.2 J/cm³ at 420 MV/m. Furthermore, in order to improve the dielectric energy storage properties of cellulose films in high humidity environment, the hydrophobic polyvinylidene fluoride (PVDF) was innovatively introduced to construct RC-AONS-PVDF composite films. The energy storage density of the prepared ternary composite films could reach 8.32 J/cm³ at 400 MV/m, which was 416 % improvement against that of the commercially biaxially oriented polypropylene (2 J/cm³), and could be cycled for >10,000 times under 200 MV/m. Concurrently, the water absorption of the composite film in humidity was effectively reduced. This work broadens the application prospect of biomass-based materials in the field of film dielectric capacitor.

Melt Processible Biodegradable Blends of Polyethylene Glycol Plasticized Cellulose Diacetate with Polylactic Acid and Polybutylene Adipate-Co-Terephthalate

Enhancing the melt processability of cellulose is key to broadening its applications. This is done via derivatization of cellulose, and subsequent plasticization and/or blending with other biopolymers, such as polylactic acid (PLA) and polybutylene adipate terephthalate (PBAT). However, derivatization of cellulose tends to reduce its biodegradability. Moreover, traditional plasticizers are non-biodegradable. In this study, we report the influence of polyethylene glycol (PEG) plasticizer on the melt processibility and biodegradability of cellulose diacetate (CD) and its blends with PLA and PBAT. CD was first plasticized with PEG (PEG-200) at 35 wt%, and then blended with PLA and PBAT using a twin-screw extruder. Blends of the PEG plasticized CD with PLA at 40 wt% and with PBAT at 60 wt% were studied in detail. Dynamic mechanical analysis (DMA) showed that PEG reduced the glass transition of the CD from ca. 220 °C to less than 100 °C, indicating effective plasticization. Scanning electron microscopy revealed that the CD/PEG-PBAT blend had a smoother morphology implying some miscibility. The CD/PEG-PBAT blend at 60 wt% PBAT had an elongation-to-break of 734%, whereas the CD/PEG-PLA blend had a tensile strength of 20.6 MPa, comparable to that of the PEG plasticized CD. After a 108-day incubation period under simulated aerobic composting, the CD/PEG-PBAT blend at 60 wt% PBAT exhibited a biodegradation of 41%, whereas that of the CD/PEG-PLA at 40 wt% PLA was 107%. This study showed that melt processible, biodegradable CD blends can be synthesized through plasticization with PEG and blending with PBAT or PLA.

Perspectives on the Lindman Hypothesis and Cellulose Interactions

In the history of cellulose chemistry, hydrogen bonding has been the predominant explanation when discussing intermolecular interactions between cellulose polymers. This is the general consensus in scholarly textbooks and in many research articles, and it applies to several other biomacromolecules' interactions as well. This rather unbalanced description of cellulose has likely impacted the development of materials based on the processing of cellulose-for example, via dissolution in various solvent systems and regeneration into solid materials, such as films and fibers, and even traditional wood fiber handling and papermaking. In this review, we take as a starting point the questioning of the general description of the nature of cellulose and cellulose interactions initiated by Professor Björn Lindman, based on generic physicochemical reasoning about surfactants and polymers. This dispute, which became known as "the Lindman hypothesis", highlights the importance of hydrophobic interactions in cellulose systems and that cellulose is an amphiphilic polymer. This paper elaborates on Björn Lindman's contribution to the subject, which has caused the scientific community to revisit cellulose and reconsider certain phenomena from other perspectives.

Preparation of an efficient magnetic nano-sorbent based on modified cellulose and carboxylated carbon nano-tubes for extraction of pesticides from food and agricultural water samples before GC-FID analysis

This paper reports the direct synthesis approach of carboxamide functionalized magnetic nano-composite named Fe₃O₄@SiO₂-NH₂@dialdehyde cellulose (DAC)@CNT-COOH as an effectual sorbent for the co-extraction of seven agricultural insecticides and herbicides from vegetable, fruit, and water samples using the magnetic dispersive micro-solid-phase extraction procedure. Under the optimized extraction conditions (sorbent amount: 18.1 mg; desorption time: 6.5 min; desorption solvent volume: 185 μL; desorption solvent: acetonitrile; extraction time: 9.5 min; pH of sample solution: 7.0, and salt content: 5.0 % w/v sodium chloride), good linearity within the range 0.5-1200 ng/mL (R² ≥ 0.998) was achieved. Extraction efficiencies were in the range 63.4-84.1 %, the limits of detection were 0.08-1.0 ng/mL, and acceptable relative recoveries (87.6-103.8 %), and precisions were also achieved (RSDs < 6.8 %, n = 3). Ultimately, the obtained results showed that the developed method could be applied to determine trace amounts of desired analytes in various agricultural water and food samples.

Synthesis of corn bract cellulose-based Au3+ fluorescent probe and its application in composite membranes

To achieve real-time monitoring of Au³⁺, a corn bract cellulose-based fluorescent probe MAC-1 for was synthesized. MAC-1 showed good fluorescence properties in DMF-H₂O (1:9, v/v, pH = 7.4) solution, showed a fluorescence emission peak at 520 nm with quenching fluorescence properties for Au³⁺. The structure of MAC-1 was analyzed by SEM (Sample microstructure images), XRD (X-ray diffraction), FTIR (Fourier transform infrared spectroscopy), ¹H NMR, Elemental analysis, EDS, Mapping and TG (Thermogravimetry) were analyzed. The fluorescence properties of the probe were also characterized by UV spectrophotometer and fluorescence spectrophotometer. The results showed that the recognition of Au³⁺ by the probe MAC-1 exhibited high selectivity and high sensitivity. Moreover, it is highly resistant to interference and has a short response time, which can be rapidly responded within 1 min. In addition, to improve the practical application of the probe, the probe was prepared as a fluorescent composite film and the fluorescence effect shown by the fluorescent composite film is consistent with the fluorescence change of the probe MAC-1 itself. The fluorescent composite film also has excellent selectivity and good overall physical and mechanical properties. This study provides a meaningful reference for the detection of Au³⁺ and further expands the application field of agroforestry waste.