Vitrimers: Permanently crosslinked polymers with dynamic network topology

Segmental and Chain Dynamics of Polyisoprene-Based Model Vitrimers

Polymer vitrimers are a new class of materials that combine the advantages of thermoplastics and thermosets. This is due to the dynamic nature of the chemical bonds linking different chains. However, how this property affects the polymer dynamics at different length scales is still an open question. Here, we investigate the dynamics of model vitrimers based on well-defined polyisoprene (PI) chains using broadband dielectric spectroscopy. In this way, we study the polymer dynamics from the segmental to the whole chain scale, taking advantage of the fact that PI belongs to the class of molecules that exhibit a net dipole moment associated with the end-to-end vector. Three distinct relaxation phenomena are identified. The fastest relaxation is attributed to the segmental PI dynamics with a small influence of the cross-linking. An intermediate relaxation attributed to the dipolar character of the cross-linker is also observed. The slower identified relaxation component, corresponding to limited fluctuations of the end-to-end PI chains, is found to be determined by the dynamics of the clusters formed by the cross-linkers with an average time scale orders of magnitude faster than that of the terminal relaxation as inferred from the viscous flow.

Knoevenagel C═C Metathesis Enabled Glassy Vitrimers with High Rigidity, Toughness, and Malleability

Thermosets, characterized by their permanent cross-linked networks, present significant challenges in recyclability and brittleness. In this work, we explore a polarized Knoevenagel C═C metathesis reaction for the development of rigid yet tough and malleable thermosets. Initial investigation on small molecule model reactions reveals the feasibility of conducting the base-catalyzed C═C metathesis reaction in a solvent-free environment. Subsequently, thermosetting poly(α-cyanocinnamate)s (PCCs) were synthesized via Knoevenagel condensation between a triarm cyanoacetate star and a dialdehyde. The thermal and mechanical properties of the developed PCCs can be easily modulated by altering the structure of the dialdehyde. Remarkably, the introduction of ether groups into the PCC leads to a combination of high rigidity and toughness with Young's modulus of ∼1590 MPa, an elongation at break of ∼79%, and a toughness reaching ∼30 MJ m3. These values are competitive to traditional thermosets, in Young's modulus but far exceed them in ductility and toughness. Moreover, the C═C metathesis facilitates stress relaxation within the bulk polymer networks, thus rendering PCCs excellent malleability and reprocessability. This work overcomes the traditional limitations of thermosets, introducing groundbreaking insights for the design of rigid yet tough and malleable thermosets, and contributing significantly to the sustainability of materials.

Retrospective Analysis of Structure-Property Relationship of Emergent Metallo-Supramolecular Polymer Networks

Metallo-supramolecular polymer networks (MSPNs) are fabricated from the crosslinking of polymers by discrete supramolecular coordination complexes. Due to the availability of various coordination complexes, e. g., 2D macrocycles and 3D nanocages, the MSPNs have been recently developed with broadly tunable visco-elasticity and enriched functions inherited from the coordination complexes. The coordination complexes possess enriched topologies and unique structural relaxation dynamics, rendering them the capability to break the traditional tradeoffs of polymer systems for the design of materials with enhanced mechanical performance. The structure-property relationship studies are critical for the material-by-design of MSPNs, while the spatiotemporal investigations are desired for the exploration of dynamics information. The work summarizes recent studies on the unique ligand-exchange kinetics and the multi-level structural relaxation dynamics of MSPNs. The MSPNs' mechanical properties can be quantitatively correlated with the dynamics for understanding the structure-property relationship. This concept will not only serve to attract more researchers to engage in the study of the structure-activity relationship of MSPNs but also inspire innovative research findings pertaining to the application of MSPNs.

Deciphering the Self-Catalytic Mechanisms of Polymerization and Transesterification in Polybenzoxazine Vitrimers

The use of internal catalysts has emerged as a pivotal design principle to facilitate dynamic exchanges within covalent adaptable networks (CANs). Polybenzoxazines, specifically, have shown considerable potential in generating vitrimers through thermally induced transesterification reactions catalyzed internally by tertiary amines. This study aims to investigate the chemical complexities of transesterification reactions within benzoxazine vitrimers. To achieve this, model molecules using various phenolic acids and amino-alcohol derivatives were synthesized as precursors. The structure of these model molecules was fully elucidated by using nuclear magnetic resonance (NMR). Differential scanning calorimetry (DSC) and rheology experiments evidenced the accelerated network formation of the precursors due to the presence of aliphatic -OH groups. Thermogravimetric analysis coupled with microcomputed gas chromatography (TGA-μGC) was used to provide evidence of transesterification reactions. The results showed that the spatial proximity between tertiary amine and hydroxyl groups significantly enhances the rate exchange, attributed to a neighboring group participation (NGP) effect. Interestingly, kinetic experiments using complementary NMR techniques revealed the thermal latency of the tertiary amine of benzoxazine toward transesterification reactions as its opening is needed to trigger the dynamic exchange. The study highlights the crucial role of steric hindrance and tertiary amine basicity in promoting the dynamic exchange in an internally catalyzed system.

Optimising Recycling Processes for Polyimine-Based Vitrimer Carbon Fibre-Reinforced Composites: A Comparative Study on Reinforcement Recovery and Material Properties

We investigated the recycling process of carbon fibre-reinforced polyimine vitrimer composites and compared composites made from virgin and recycled fibres. The vitrimer matrix consisted of a two-component polyimine-type vitrimer system, and as reinforcing materials, we used nonwoven felt and unidirectional carbon fibre. Various diethylenetriamine (DETA) and xylene solvent ratios were examined to find the optimal dissolution conditions. The 20:80 DETA-xylene ratio provided efficient dissolution, and the elevated temperature (80 °C) significantly accelerated the process. Scaling up to larger composite structures was demonstrated. Scanning electron microscopy (SEM) confirmed effective matrix removal, with minimal residue on carbon fibre surfaces and good adhesion in recycled composites. The recycled nonwoven composite exhibited a decreased glass transition temperature due to the residual solvents in the matrix, while the UD composite showed a slight increase. Dynamic mechanical analysis on the recycled composite showed an increased storage modulus for nonwoven composites at room temperature and greater resistance to deformation at elevated temperatures for the UD composites. Interlaminar shear tests indicated slightly reduced adhesion strength in the reprocessed composites. Overall, this study demonstrates the feasibility of recycling vitrimer composites, emphasising the need for further optimisation to ensure environmental and economic sustainability while mitigating residual solvent and matrix effects.

Molecular Simulation of Covalent Adaptable Networks and Vitrimers: A Review

Covalent adaptable networks and vitrimers are novel polymers with dynamic reversible bond exchange reactions for crosslinks, enabling them to modulate their properties between those of thermoplastics and thermosets. They have been gathering interest as materials for their recycling and self-healing properties. In this review, we discuss different molecular simulation efforts that have been used over the last decade to investigate and understand the nanoscale and molecular behaviors of covalent adaptable networks and vitrimers. In particular, molecular dynamics, Monte Carlo, and a hybrid of molecular dynamics and Monte Carlo approaches have been used to model the dynamic bond exchange reaction, which is the main mechanism of interest since it controls both the mechanical and rheological behaviors. The molecular simulation techniques presented yield sufficient results to investigate the structure and dynamics as well as the mechanical and rheological responses of such dynamic networks. The benefits of each method have been highlighted. The use of other tools such as theoretical models and machine learning has been included. We noticed, amongst the most prominent results, that stress relaxes as the bond exchange reaction happens, and that at temperatures higher than the glass transition temperature, the self-healing properties are better since more bond BERs are observed. The lifetime of dynamic covalent crosslinks follows, at moderate to high temperatures, an Arrhenius-like temperature dependence. We note the modeling of certain properties like the melt viscosity with glass transition temperature and the topology freezing transition temperature according to a behavior ruled by either the Williams-Landel-Ferry equation or the Arrhenius equation. Discrepancies between the behavior in dissociative and associative covalent adaptable networks are discussed. We conclude by stating which material parameters and atomistic factors, at the nanoscale, have not yet been taken into account and are lacking in the current literature.

Self-Healing Transparent Poly(dimethyl)siloxane with Tunable Mechanical Properties: Toward Enhanced Aging Materials for Space Applications

When exposed to the geostationary orbit, polymeric materials tend to degrade on their surface due to the appearance of cracks. Implementing the self-healing concept in polymers going to space is a new approach to enhancing the lifespan of materials that cannot be replaced once launched. In this study, the elaboration of autonomous self-healing transparent poly(dimethylsiloxane) (PDMS) materials resistant to proton particles is presented. The PDMS materials are functionalized with various compositions of urea and imine moieties, forming dynamic covalent and/or supramolecular networks. The hydrogen bonds induced by the urea ensure the formation of a supramolecular network, while the dynamic covalent imine bonds are capable of undergoing exchange reactions. Materials with a broad range of mechanical properties were obtained depending on the composition and structure of the PDMS networks. As coating applications in a spatial environment were mainly targeted, the surface properties of the polymer are essential. Thus, percentages of scratch recovery were determined by AFM. From these data, self-healing kinetics were extracted and rationalized based on the polymer structures. The obtained data were in good agreement with the relaxation times determined by rheology in stress relaxation experiments. Moreover, the accelerated aging of materials under proton irradiation, simulating a major part of the geostationary environment, revealed a strong limitation or disappearance of cracks while keeping the transparency of the PDMS. These promising results open routes to prepare new flexible autonomous polymeric materials for space applications.

Recyclable and Biobased Vitrimers for Carbon Fibre-Reinforced Composites-A Review

Economic and environmental concerns over the accumulation of end-of-life carbon fibre composite waste have led to increased attention to sustainable materials with low environmental impact. Over decades of research, vitrimers, a modern class of covalent adaptable networks, have bridged the gap between thermoplastics and thermosets. With the distinguishing feature of dynamic covalent bonds, vitrimers can be rearranged and reprocessed within their existing network structures in response to external stimuli such as heat or light. This poses a unique solution to repairing damaged composites, extending their service life, and reducing post-consumer waste. However, the synthesis of vitrimers often requires petrochemical consumption, which increases their carbon footprint. Using bio-based materials could be a promising solution to reduce the reliance on petrochemicals and their related pollution. This review compiles the contemporary requirements for bio-based vitrimers regarding their properties, scalability, and recycling features. This article also presents a comprehensive overview of the pathways to produce sustainable bio-based vitrimers and an overview of promising studies showing the potential uses of bio-derived vitrimers on carbon fibre composite productions.

Closed-loop recycling of sulfur-rich polymers with tunable properties spanning thermoplastics, elastomers, and vitrimers

The development of closed-loop recycling polymers that exhibit excellent performance is of great significance. Sulfur-rich polymers possessing excellent optical, thermal, and mechanical properties are promising candidates for chemical recycling but lack efficient synthetic strategies for achieving diverse structures. Herein, we report a universal synthetic strategy for producing polytrithiocarbonates, a class of sulfur-rich polymers, via the polycondensation of dithiols and dimethyl trithiocarbonate. This strategy has excellent compatibility with a wide range of monomers, including aliphatic, heteroatomic, and aromatic dithiols enabling the synthesis of polytrithiocarbonates with diverse structures. The present synthesis strategy offers a versatile platform for the construction of thermoplastics, elastomers, and vitrimers. Notably, these polytrithiocarbonates can be easily depolymerized via solvolysis into the corresponding monomers, which can be repolymerized to virgin polymers without changing the material properties.

Covalent Adaptable Networks with Tailorable Material Properties Based on Divanillin Polyimines

Covalent adaptable networks (CANs) are being developed as future replacements for thermosets as they can retain the high mechanical and chemical robustness inherent to thermosets but also integrate the possibility of reprocessing after material use. Here, covalent adaptable polyimine-based networks were designed with methoxy and allyloxy-substituted divanillin as a core component together with long flexible aliphatic fatty acid-based amines and a short rigid chain triamine, yielding CANs with a high renewable content. The designed series of CANs with reversible imine functionality allowed for fast stress relaxation and tailorability of the thermomechanical properties, as a result of the ratio between long flexible and short rigid amines, with tensile strength (σb) ranging 1.07-18.7 MPa and glass transition temperatures ranging 16-61 °C. The CANs were subsequently successfully reprocessed up to three times without determinantal structure alterations and retained mechanical performance. The CANs were also successfully chemically recycled under acidic conditions, where the starting divanillin monomer was recovered and utilized for the synthesis of a recycled CAN with similar thermal and mechanical properties. This promising class of thermosets bearing sustainable dynamic functionalities opens a window of opportunity for the progressive replacement of fossil-based thermosets.

3D-Printed Architectured Silicones with Autonomic Self-Healing and Creep-Resistant Behavior

Self-healing silicones that are able to restore functionalities and extend the lifetime of soft devices hold great potential in many applications. However, currently available silicones need to be triggered to self-heal or suffer from creep-induced irreversible deformation during use. Here, a platform is proposed to design and print silicone objects that are programmed at the molecular and architecture levels to achieve self-healing at room temperature while simultaneously resisting creep. At the molecular scale, dioxaborolanes moieties are incorporated into silicones to synthesize self-healing vitrimers, whereas conventional covalent bonds are exploited to make creep-resistant elastomers. When combined into architectured printed parts at a coarser length scale, the layered materials exhibit fast healing at room temperature without compromising the elastic recovery obtained from covalent polymer networks. A patient-specific vascular phantom and fluidic chambers are printed to demonstrate the potential of architectured silicones in creating damage-resilient functional devices using molecularly designed elastomer materials.

Comparing Surface and Bulk Curing Processes of an Epoxy Vitrimer

We used atomic force microscopy-based infrared spectroscopy (AFM-IR) and nanomechanical mapping (AFM-NM) to image the surface of a vitrimer, specifically dicarboxylic acid-cured diglycidyl ether of bisphenol A (DGEBA), to assess the curing process of a surface layer and compared this to the process in the bulk. We identified the β-hydroxy esters with various functionalities that are the key to form the cross-links for a system, including difunctional DGEBA and carboxylic acids. The IR peaks of the carbonyl group in generated ester groups are distinguished clearly from those in acids, allowing us to quantitatively assess the curing process at the surface and in the bulk. The initial curing at the surface exhibits a gradual cross-linking and is found to be lower than a rapid cross-linking in the bulk due to a relatively lower concentration of the β-hydroxy esters with high functionalities. This curing process leads to a smaller chemically and mechanically heterogeneous nanostructure at the surface relative to the bulk. After multiple reprocessings, a substantial number of esters lacking dynamic exchange capability form in the bulk, which decrease the flowability and reprocessability of the vitrimers and therefore the mechanical properties.

Bicontinuous vitrimer heterogels with wide-span switchable stiffness-gated iontronic coordination

Currently, it remains challenging to balance intrinsic stiffness with programmability in most vitrimers. Simultaneously, coordinating materials with gel-like iontronic properties for intrinsic ion transmission while maintaining vitrimer programmable features remains underexplored. Here, we introduce a phase-engineering strategy to fabricate bicontinuous vitrimer heterogel (VHG) materials. Such VHGs exhibited high mechanical strength, with an elastic modulus of up to 116 MPa, a high strain performance exceeding 1000%, and a switchable stiffness ratio surpassing 5 × 103. Moreover, highly programmable reprocessing and shape memory morphing were realized owing to the ion liquid-enhanced VHG network reconfiguration. Derived from the ion transmission pathway in the ILgel, which responded to the wide-span switchable mechanics, the VHG iontronics had a unique bidirectional stiffness-gated piezoresistivity, coordinating both positive and negative piezoresistive properties. Our findings indicate that the VHG system can act as a foundational material in various promising applications, including smart sensors, soft machines, and bioelectronics.

3D Printing of Self-Healing Materials

This review article presents a comprehensive overview of the latest advances in the field of 3D printable structures with self-healing properties. Three-dimensional printing (3DP) is a versatile technology that enables the rapid manufacturing of complex geometric structures with precision and functionality not previously attainable. However, the application of 3DP technology is still limited by the availability of materials with customizable properties specifically designed for additive manufacturing. The addition of self-healing properties within 3D printed objects is of high interest as it can improve the performance and lifespan of structural components, and even enable the mimicking of living tissues for biomedical applications, such as organs printing. The review will discuss and analyze the most relevant results reported in recent years in the development of self-healing polymeric materials that can be processed via 3D printing. After introducing the chemical and physical self-healing mechanism that can be exploited, the literature review here reported will focus in particular on printability and repairing performances. At last, actual perspective and possible development field will be critically discussed.

Programmable and Shape-Color Synchronous Dual-Response Wood with Thermal Stimulus

Stimuli-responsive materials exhibit huge potential in sensors, actuators, and electronics; however, their further development for reinforcement, visualization, and biomass-incorporation remains challenging. Herein, based on the impregnation of thermochromic microcapsule (TCM)-doped dynamic covalent vitrimers, a programmable shape-color dual-responsive wood (SRW-TC) was demonstrated with robust anisotropic structures and exchangeable covalent adaptable networks. Under mild conditions, the resultant SRW-TC displays feasible shape memorability and programmability, resulting from the rigidity-flexibility shift induced by the glass-transition temperature (34.99 °C) and transesterification reaction triggered by the topology freezing transition temperature (149.62 °C). Furthermore, the obtained SRW-TC possesses satisfactory mechanical performance (tensile strength of 45.70 MPa), thermal insulation (thermal conductivity of 0.27 W/m K), anisotropic light management, and benign optical properties (transmittance of 51.73% and haze of 99.67% at 800 nm). Importantly, the incorporation of compatible TCM enables SRW-TC to visualize shape memory feasibility and rigidity/flexibility switching and respond to the external thermal stimulus through the thermal-induced shape-color synchronous dual-responsiveness, which successfully demonstrates the applications of sensing temperature, grasping objects, encrypting/decoding icon messages, and so on. The proposed facile and highly effective strategy could serve as a guideline for developing high-performance multifunctional wood composite with promising intelligent applications in performance visualization, environmental sensing, materials interactivity, information dual-encryption, local precision shape and color regulation, etc.

Next-Generation Vitrimers Design through Theoretical Understanding and Computational Simulations

Vitrimers are an innovative class of polymers that boast a remarkable fusion of mechanical and dynamic features, complemented by the added benefit of end-of-life recyclability. This extraordinary blend of properties makes them highly attractive for a variety of applications, such as the automotive sector, soft robotics, and the aerospace industry. At their core, vitrimer materials consist of crosslinked covalent networks that have the ability to dynamically reorganize in response to external factors, including temperature changes, pressure variations, or shifts in pH levels. In this review, the aim is to delve into the latest advancements in the theoretical understanding and computational design of vitrimers. The review begins by offering an overview of the fundamental principles that underlie the behavior of these materials, encompassing their structures, dynamic behavior, and reaction mechanisms. Subsequently, recent progress in the computational design of vitrimers is explored, with a focus on the employment of molecular dynamics (MD)/Monte Carlo (MC) simulations and density functional theory (DFT) calculations. Last, the existing challenges and prospective directions for this field are critically analyzed, emphasizing the necessity for additional theoretical and computational advancements, coupled with experimental validation.

Upcycling Polyolefin Blends into High-Performance Materials by Exploiting Azidotriazine Chemistry Using Reactive Extrusion

The revalorization of incompatible polymer blends is a key obstacle in realizing a circular economy in the plastics industry. Polyolefin waste is particularly challenging because it is difficult to sort into its constituent components. Untreated blends of polyethylene and polypropylene typically exhibit poor mechanical properties that are suitable only for low-value applications. Herein, we disclose a simple azidotriazine-based grafting agent that enables polyolefin blends to be directly upcycled into high-performance materials by using reactive extrusion at industrially relevant processing temperatures. Based on a series of model experiments, the azidotriazine thermally decomposes to form a triplet nitrene species, which subsequently undergoes a complex mixture of grafting, oligomerization, and cross-linking reactions; strikingly, the oligomerization and cross-linking reactions proceed through the formation of nitrogen-nitrogen bonds. When applied to polyolefin blends during reactive extrusion, this combination of reactions leads to the generation of amorphous, phase-separated nanostructures that tend to exist at polymer-polymer interfaces. These nanostructures act as multivalent cross-linkers that reinforce the resulting material, leading to dramatically improved ductility compared with the untreated blends, along with high dimensional stability at high temperatures and excellent mechanical recyclability. We propose that this unique behavior is derived from the thermomechanically activated reversibility of the nitrogen-nitrogen bonds that make up the cross-linking structures. Finally, the scope of this chemistry is demonstrated by applying it to ternary polyolefin blends as well as postconsumer polyolefin feedstocks.

Vitrimer Nanocomposites for Highly Thermal Conducting Materials with Sustainability

Vitrimers, as dynamic covalent network polymers, represent a groundbreaking advancement in materials science. They excel in their applications, such as advanced thermal-conductivity composite materials, providing a sustainable alternative to traditional polymers. The incorporation of vitrimers into composite fillers enhances alignment and heat passway broadly, resulting in superior thermal conductivity compared to conventional thermosetting polymers. Their dynamic exchange reactions enable straightforward reprocessing, fostering the easy reuse of damaged composite materials and opening possibilities for recycling both matrix and filler components. We review an overview of the present advancements in utilizing vitrimers for highly thermally conductive composite materials.

Catalyst-Free Cardanol-Based Epoxy Vitrimers for Self-Healing, Shape Memory, and Recyclable Materials

Bio-based vitrimers present a promising solution to the issues associated with non-renewable and non-recyclable attributes of traditional thermosetting resins, showcasing extensive potential for diverse applications. However, their broader adoption has been hindered by the requirement for catalyst inclusion during the synthesis process. In this study, a cardanol-based curing agent with poly-hydroxy and tertiary amine structures was prepared by a clean synthetic method under the theory of click chemistry. The reaction of a cardanol-based curing agent with diglycidyl ether of bisphenol A formed catalyst-free, self-healing, and recyclable bio-based vitrimers. The poly-hydroxy and tertiary amine structures in the vitrimers promoted the curing of epoxy-carboxylic acid in the cross-linked network and served as internal catalysts of dynamic transesterification. In the absence of catalysts, the vitrimers network can achieve topological network rearrangement through dynamic transesterification, exhibiting excellent reprocessing performance. Moreover, the vitrimers exhibited faster stress relaxation (1500 s at 180 °C), lower activation energy (92.29 kJ·mol-1) and the tensile strength of the recycled material reached almost 100% of the original sample. This work offers a new method for preparing cardanol-based epoxy vitrimers that be used to make coatings, hydrogels, biomaterials, adhesives, and commodity plastics in the future.

Boron-Nitrogen Lewis Pairs in the Assembly of Supramolecular Macrocycles, Molecular Cages, Polymers, and 3D Materials

Covering an exceptionally wide range of bond strengths, the dynamic nature and facile tunability of dative B-N bonds is highly attractive when it comes to the assembly of supramolecular polymers and materials. This Minireview offers an overview of advances in the development of functional materials where Lewis pairs (LPs) play a key role in their assembly and critically influence their properties. Specifically, we describe the reversible assembly of linear polymers with interesting optical, electronic and catalytic properties, discrete macrocycles and molecular cages that take up diverse guest molecules and undergo structural changes triggered by external stimuli, covalent organic frameworks (COFs) with intriguing interlocked structures that can embed and separate gases such as CO2 and acetylene, and soft polymer networks that serve as recyclable, self-healing, and responsive thermosets, gels and elastomeric materials.

On Lightweight Shape Memory Vitrimer Composites

Lightweight materials are highly desired in many engineering applications. A popular approach to obtain lightweight polymers is to prepare polymeric syntactic foams by dispersing hollow particles, such as hollow glass microbubbles (HGMs), in a polymer matrix. Integrating shape memory vitrimers (SMVs) in fabricating these syntactic foams enhances their appeal due to the multifunctionality of SMVs. The SMV-based syntactic foams have many potential applications, including actuators, insulators, and sandwich cores. However, there is a knowledge gap in understanding the effect of the HGM volume fraction on different material properties and behaviors. In this study, we prepared an SMV-based syntactic foam to investigate the influence of the HGM volume fractions on a broad set of properties. Four sample groups, containing 40, 50, 60, and 70% HGMs by volume, were tested and compared to a control pure SMV group. A series of analyses and various chemical, physical, mechanical, thermal, rheological, and functional experiments were conducted to explore the feasibility of ultralight foams. Notably, the effect of HGM volume fractions on the rheological properties was methodically evaluated. The self-healing capability of the syntactic foam was also assessed for healing at low and high temperatures. This study proves the viability of manufacturing multifunctional ultralightweight SMV-based syntactic foams, which are instrumental for designing ultralightweight engineering structures and devices.

Hyperbranched Dynamic Crosslinking Networks Enable Degradable, Reconfigurable, and Multifunctional Epoxy Vitrimer

Degradation and reprocessing of thermoset polymers have long been intractable challenges to meet a sustainable future. Star strategies via dynamic cross-linking hydrogen bonds and/or covalent bonds can afford reprocessable thermosets, but often at the cost of properties or even their functions. Herein, a simple strategy coined as hyperbranched dynamic crosslinking networks (HDCNs) toward in-practice engineering a petroleum-based epoxy thermoset into degradable, reconfigurable, and multifunctional vitrimer is provided. The special characteristics of HDCNs involve spatially topological crosslinks for solvent adaption and multi-dynamic linkages for reversible behaviors. The resulting vitrimer displays mild room-temperature degradation to dimethylacetamide and can realize the cycling of carbon fiber and epoxy powder from composite. Besides, they have supra toughness and high flexural modulus, high transparency as well as fire-retardancy surpassing their original thermoset. Notably, it is noted in a chance-following that ethanol molecule can induce the reconstruction of vitrimer network by ester-exchange, converting a stiff vitrimer into elastomeric feature, and such material records an ultrahigh modulus (5.45 GPa) at -150 °C for their ultralow-temperature condition uses. This is shaping up to be a potentially sustainable advanced material to address the post-consumer thermoset waste, and also provide a newly crosslinked mode for the designs of high-performance polymer.

Copolymerization Involving Sulfur-Containing Monomers

Incorporating sulfur (S) atoms into polymer main chains endows these materials with many attractive features, including a high refractive index, mechanical properties, electrochemical properties, and adhesive ability to heavy metal ions. The copolymerization involving S-containing monomers constitutes a facile method for effectively constructing S-containing polymers with diverse structures, readily tunable sequences, and topological structures. In this review, we describe the recent advances in the synthesis of S-containing polymers via copolymerization or multicomponent polymerization techniques concerning a variety of S-containing monomers, such as dithiols, carbon disulfide, carbonyl sulfide, cyclic thioanhydrides, episulfides and elemental sulfur (S8). Particularly, significant focus is paid to precise control of the main-chain sequence, stereochemistry, and topological structure for achieving high-value applications.

Elastomeric vitrimers from designer polyhydroxyalkanoates with recyclability and biodegradability

Cross-linked elastomers are stretchable materials that typically are not recyclable or biodegradable. Medium-chain-length polyhydroxyalkanoates (mcl-PHAs) are soft and ductile, making these bio-based polymers good candidates for biodegradable elastomers. Elasticity is commonly imparted by a cross-linked network structure, and covalent adaptable networks have emerged as a solution to prepare recyclable thermosets via triggered rearrangement of dynamic covalent bonds. Here, we develop biodegradable and recyclable elastomers by chemically installing the covalent adaptable network within biologically produced mcl-PHAs. Specifically, an engineered strain of Pseudomonas putida was used to produce mcl-PHAs containing pendent terminal alkenes as chemical handles for postfunctionalization. Thiol-ene chemistry was used to incorporate boronic ester (BE) cross-links, resulting in PHA-based vitrimers. mcl-PHAs cross-linked with BE at low density (<6 mole %) affords a soft, elastomeric material that demonstrates thermal reprocessability, biodegradability, and denetworking at end of life. The mechanical properties show potential for applications including adhesives and soft, biodegradable robotics and electronics.

Microscopic Evidence for the Topological Transition in Model Vitrimers

In addition to the glass transition, vitrimers undergo a topological transition from viscoelastic liquid to viscoelastic solid behavior when the network rearrangements facilitated by dynamic bond exchange reactions freeze. The microscopic observation of this transition is elusive. Model polyisoprene vitrimers based on imine dynamic covalent bonds were synthesized by reaction of α,ω-dialdehyde-functionalized polyisoprenes and a tris(2-aminoethyl)amine. In these dynamic networks nanophase separation of polymer and reactive groups leads to the emergence of a relevant length scale characteristic for the network structure. We exploited the scattering sensitivity to structural features at different length scales to determine how dynamical and topological arrests affect correlations at segmental and network levels. Chains expand obeying the same expansion coefficient throughout the entire viscoelastic region, i.e., both in the elastomeric regime and in the liquid regime. The onset of liquid-like behavior is only apparent at the mesoscale, where the scattering reveals the reorganization of the network triggered by bond exchange events. The such determined "microscopic" topological transition temperature is compared with the outcome of "conventional" methods, namely viscosimetry and differential scanning calorimetry. We show that using proper thermal (aging-like) protocols, this transition is also nicely revealed by the latter.

Overcoming the barrier: designing novel thermally robust shape memory vitrimers by establishing a new machine learning framework

Shape memory vitrimers (SMVs) are an emerging class of advanced materials that have garnered significant interest from researchers in the past five to six years. These materials can return to their original shape when exposed to a stimulus, while also healing damage they have sustained. However, achieving both high healing/recycling efficiency and a high glass transition temperature (Tg) in SMVs has been challenging, due to the conflicting requirements between molecular chain mobility and the formation and reaction of dynamic covalent bond exchange. Based on the understanding of chemo-physical properties, this study first leverages machine learning (ML), involving supervised and unsupervised learning approaches, to navigate this complex design space of SMVs. Furthermore, we elaborated the basic mathematical frameworks of ML approaches and comprehensively compared their performances. Based on the best performing model, we designed four types of thermally robust shape memory vitrimers (TRSMVs), which boast high recycling efficiency, elevated Tg, and exemplary shape memory effects, overcoming conventional barriers. One of the discovered samples exhibited outstanding performance with a Tg of 233.5 °C, a recycling efficiency of 84.1%, and a recovery stress of 33 MPa in experiments. It aligns well with ML predictions, showcasing the potential of our ML framework in driving innovative materials design and advancing the field of smart polymers.

On-Demand Activation of Transesterification by Chemical Amplification in Dynamic Thiol-Ene Photopolymers

Chemical amplification is a well-established concept in photoresist technology, wherein one photochemical event leads to a cascade of follow-up reactions that facilitate a controlled change in the solubility of a polymer. Herein, we transfer this concept to dynamic polymer networks to liberate both catalyst and functional groups required for bond exchange reactions under UV irradiation. For this, we exploit a photochemically generated acid to catalyse a deprotection reaction of an acid-labile tert-butoxycarbonyl group, which is employed to mask the hydroxy groups of a vinyl monomer. At the same time, the released acid serves as a catalyst for thermo-activated transesterifications between the deprotected hydroxy and ester moieties. Introduced in an orthogonally cured (450 nm) thiol-click photopolymer, this approach allows for a spatio-temporally controlled activation of bond exchange reactions, which is crucial in light of the creep resistance versus reflow ability trade-off of dynamic polymer networks.

Does the Varying Reactivity in the Transient Polymer Network through Dynamic Exchange Regulate the Closed-Loop Circularity in Polyolefin Vitrimers?

According to current projections, of the 400 mega tons of plastic produced globally, 70% is waste and of that only 16% is recycled and the rest is incinerated. This is estimated to contribute to ca. 16% of the net carbon emission by 2050. Such a massive amount of unmanaged plastic waste and the associated huge carbon footprint sets a significant challenge to tackle in the coming decades. To achieve net-zero carbon emission, closed-loop circular economy in plastics is crucial but collection, sorting and processing the postconsumer recycled (PCR) plastics poses humongous challenge in achieving this circularity, unless an effective strategy is designed. In a first of its kind, a designer biobased molecule was synthesized (here maleated castor oil, mCO) that is steric and thermally stable and forms in situ "homo-cross-linking" in the melt post grafting onto PCR-PP. This designer molecule, besides offering a transient network, helps bridge the fragmented PP chains which is usually not amenable from the traditional grafting (like maleic anhydride), thereby addressing a long-standing challenge of retaining the properties post grafting due to chain scission in the melt. The resulting maleated (m) PCR-PP now offers abundant functionality which helped us design single and dual covalent adaptable network (CANs) and evaluate their consequences on the structure-property correlation. The PCR-PP Vitrimers demonstrate a distinct rubbery plateau in the melt and reprocessability with >90% recovery in mechanical properties even after the fifth sequence of recycling. We propose here for the first time how the varying reactivity (single or dual) in the transient polymer network, through dynamic exchange, regulates the closed-loop circularity in PP Vitrimers. Our results begin to suggest that the varying reactivity should be taken into account as an additional design parameter, as it influences both the stress relaxation rates and the flow activation energy. We now understand that the topology reconfiguration is strongly dependent on this varying reactivity, which also controls the overall crystalline morphology and the structural properties in the Vitrimers. This study, in addition to opening new avenues for recycling PP, will help guide researchers working in this field from both academia and industry.

DFT Study of Imine-Exchange Reactions in Iron(II)-Coordinated Pincers

The imine bond is among the most applied motifs in dynamic covalent chemistry. Although its uses are varied and often involve coordination to a transition metal for stability, mechanistic studies on imine exchange reactions so far have not included metal coordination. Herein, we investigated the condensation and transimination reactions of an Fe2+ -coordinated diimine pyridine pincer, employing wB97XD/6-311G(2d,2p) DFT calculations in acetonitrile. We first experimentally confirmed that Fe2+ is strongly coordinated by these pincers, and is thus a justified model ion. When considering a four-membered ring-shaped transition state for proton transfers, the required activation energies for condensation and transimination reaction exceeded the values expected for reactions known to be spontaneous at room temperature. The nature of the incoming and exiting amines and the substituents on the para-position of the pincer had no effect on this. Replacing Fe2+ with Zn2+ or removing it altogether did not reduce it either. However, the addition of two ethylamine molecules lowered the energy barriers to be compatible with experiment (19.4 and 23.2 kcal/mol for condensation and transimination, respectively). Lastly, the energy barrier of condensation of a non-coordinated pincer was significantly higher than found for Fe2+ -coordinating pincers, underlining the catalyzing effect of metal coordination on imine exchange reactions.

Daisy chain architectures: from discrete molecular entities to polymer materials

Daisy chain architectures, made by the self-complementary threading of an axle covalently linked to a macrocycle, represent a particularly intriguing family of supramolecular and mechanically interlocked (macro)molecules. In this review, we discuss their recent history, their modular chemical structures, and the various synthetic strategies to access them. We also detail how their internal sliding motions can be controlled and how their integration within polymers can amplify that motions up to the macroscopic scale. This overview of the literature demonstrates that the peculiar structure and dynamics of daisy chains have already strongly influenced the research on artificial molecular machines, with the potential to be implemented from nanometric switchable devices to mechanically active soft-matter materials.

Evidence through Thermal Analysis of Retro Diels-Alder Reaction in Model Networks Based on Anthracene Modified Polyester Resins

The present work is focused on polyester resins obtained from the diglycidyl ether of bisphenol A and anthracene modified 5-maleimidoisophthalic acid. Because the maleimide-anthracene Diels-Alder (DA) adduct is stable at high temperatures, it is considered a good option for high performance polymers. However, the information related to the retroDA reaction for this type of adduct is sometimes incoherent. A detailed thermal study (conventional TGA, HiRes TGA, MTGA, DSC, MDSC) was performed in order to establish whether the rDA reaction can be revealed for this type of anthracene modified polyester resins. The TGA method confirmed the cleavage of the anthracene-maleimide DA adduct, while the DSC demonstrated the presence of anthracene in the system. At high temperatures, unprotected maleimide homopolymerizes and/or reacts with allyl groups according to the -ene reaction. Therefore, the thermal DA reaction is not displayed anymore upon the subsequent cooling, and the glass transition region is registered at a higher temperature range during the second heating. The use of sample-controlled thermal analysis (HiRes TGA) and MTGA improved the TGA result; however, it was not possible to separate the very complex degradation processes that are interconnected.

Exploring the Limits of High-Tg Epoxy Vitrimers Produced through Resin-Transfer Molding

Over the past few years, scientists have developed new ways to overcome the recycling issues of conventional thermosets with the introduction of associative covalent adaptable networks (i.e., vitrimers) in polymer materials. Even though various end-use vitrimers have already been reported, just a few of them have targeted high-performance industrial applications. Herein, we develop a promising high-performance epoxy vitrimer based on a commercially available resin widely used in aeronautics with the highest glass transition temperature (Tg) of 233 °C ever reported for a vitrimer. A complete study of its physicochemical properties and cure kinetics was conducted, enabling the construction of the first time-temperature-transformation (TTT) diagram reported in the literature. This diagram allows a full determination of the processing and curing parameters leading to the manufacturing of vitrimer samples by the resin-transfer molding (RTM) process. The reshapability and limits therefrom of this high-Tg vitrimer were evaluated by three successful thermoforming cycles without degradation.

RNA-inspired phosphate diester dynamic covalent networks

Neighboring group assisted rearrangement substantially increases relaxation rates in dynamic covalent networks, allowing easier (re)processing of these materials. In this work, we introduce a dynamic covalent network with anionic phosphate diesters as the sole dynamic group, incorporating β-hydroxy groups as a neighboring group, mimicking the self-cleaving backbone structure of RNA. The diester-based networks have slightly slower dynamics, but significantly better hydrolytic (and thermal) stability than analogous phosphate triester-based networks. Catalysis by the β-hydroxy group is vital for fast network rearrangement to occur, while the nature of the counterion has a negligible effect on the relaxation rate. Variable temperature 31P solid-state NMR demonstrated a dissociative bond rearrangement mechanism to be operative.

A Critical Review of Palladium Nanoparticles Decorated in Smart Microgels

Palladium nanoparticles (Pd) combined with smart polymer microgels have attracted significant interest in the past decade. These hybrid materials have unique properties that make them appealing for various applications in biology, environmental remediation, and catalysis. The responsive nature of the microgels in these hybrids holds great promise for a wide range of applications. The literature contains diverse morphologies and architectures of Pd nanoparticle-based hybrid microgels, and the architecture of these hybrids plays a vital role in determining their potential uses. Therefore, specific Pd nanoparticle-based hybrid microgels are designed for specific applications. This report provides an overview of recent advancements in the classification, synthesis, properties, characterization, and uses of Pd nanostructures loaded into microgels. Additionally, the report discusses the latest progress in biomedical, catalytic, environmental, and sensing applications of Pd-based hybrid microgels in a tutorial manner.

Permanent Shape Reconfiguration and Locally Reversible Actuation of a Carbon Nanotube/Ethylene Vinyl Acetate Copolymer Composite by Constructing a Dynamic Cross-Linked Network

Given the rapid developments in modern devices, there is an urgent need for shape-memory polymer composites (SMPCs) in soft robots and other fields. However, it remains a challenge to endow SMPCs with both a reconfigurable permanent shape and a locally reversible shape transformation. Herein, a dynamic cross-linked network was facilely constructed in carbon nanotube/ethylene vinyl acetate copolymer (CNT/EVA) composites by designing the molecular structure of EVA. The CNT/EVA composite with 0.05 wt % CNT realized a steady-state temperature of ∼75 °C under 0.11 W/cm2 light intensity, which gave rise to remote actuation behavior. The dynamic cross-linked network along with a wide melting temperature offered opportunities for chemical and physical programming, thus realizing the achievement of the programmable three-dimensional (3D) structure and locally reversible actuation. Specifically, the CNT/EVA composite exhibited a superior permanent shape reconfiguration by activating the dynamic cross-linked network at 140 °C. The composite also showed a high reversible deformation rate of 11.1%. These features endowed the composites with the capability of transformation to 3D structure as well as locally reversible actuation performance. This work provides an attractive guideline for the future design of SMPCs with sophisticated structures and actuation capability.

Reprocessible Triketoenamine-Based Vitrimers with Closed-Loop Recyclability

Development of thermosets that can be repeatedly recycled via both chemical route (closed-loop) and thermo-mechanical process is attractive and remains an imperative task. In this work, we reported a triketoenamine based dynamic covalent network derived from 2,4,6-triformylphloroglucinol and secondary amines. The resulting triketoenamine based network does not have intramolecular hydrogen bonds, thus reducing its π-electron delocalization, lowering the stability of the tautomer structure, and enabling its dynamic feature. By virtue of the highly reversible bond exchange, this novel dynamic covalent bond enables the easy construction of highly crosslinked and chemically reprocessable networks from commercially available monomers. The as-made polymer monoliths exhibit high mechanical properties (tensile strength of 79.4 MPa and Young's modulus of 571.4 MPa) and can undergo a monomer-network-monomer (yields up to 90 %) recycling mediated by an aqueous solution, with the new-generation polymer capable of restoring the material strength to its original state. In addition, owing to its dynamic nature, a catalyst-free and low-temperature reprogrammable covalent adaptable network (vitrimer) was achieved. The design concept reported herein can be applied to the development of other novel vitrimers with high repressibility and recyclability, and sheds light on future design of sustainable polymers with minimal environmental impact.

Trends in the Synthesis of Polymer Nano- and Microscale Materials for Bio-Related Applications

Polymeric nano- and microscale materials bear significant potential in manifold applications related to biomedicine. This is owed not only to the large chemical diversity of the constituent polymers, but also to the various morphologies these materials can achieve, ranging from simple particles to intricate self-assembled structures. Modern synthetic polymer chemistry permits the tuning of many physicochemical parameters affecting the behavior of polymeric nano- and microscale materials in the biological context. In this Perspective, an overview of the synthetic principles underlying the modern preparation of these materials is provided, aiming to demonstrate how advances in and ingenious implementations of polymer chemistry fuel a range of applications, both present and prospective.

Vitrimer synthesis from recycled polyurethane gylcolysate

Polyurethanes and plastics have become ubiquitous in modern society, finding use in a wide variety of applications such as clothing, automobiles, and shoes. While these materials provide numerous benefits to human life, their persistence in the environment has caused ecological imbalances. Therefore, new processes are needed to make these materials more sustainable and re-usable. In 2011, Ludwik Leibler introduced a new class of covalent adaptable network (CAN) polymers called Vitrimers. Vitrimers possess self-repairing properties and are capable of being reprocessed due to dynamic exchange or breaking/recombination of covalent bonds, similar to thermoset materials. This study explores the synthesis of Vitrimers using waste polyurethane or plastics as feedstock. The raw materials were glycolysed to obtain the glycolysate, which was then used as a reagent for the Vitrimers synthesis. The main objective of this study was to achieve the maximum self-repairable rate of the prepared sample. The Taguchi orthogonal analysis was employed to guide the experiments. The optimized experimental conditions for polyurethane glycolysis were determined to be under ethylene glycol and catalyzed by sodium hydroxide at 180°C for 1 h, resulting in the highest hydroxyl concentration in the glycolysate. In the second stage of the experiment, the ratio of hexamethylene diisocyanate (HDI) to solvent was set to 2, HDI trimer to solvent was 2, and PGE/glycolysate was 0.5, with equal amounts of PEG and glycolysate used as the solvent. The reaction was carried out at 80°C for 1 h, achieving a self-repair ability of 47.5% in the prepared sample. The results of this study show that waste polyurethane or plastics can be effectively recycled and transformed into vitrimers with self-repairing properties. The use of glycolysis as a feedstock is a promising method for the sustainable recycling of polyurethane waste. The Taguchi orthogonal analysis is an effective approach for optimizing experimental conditions and improving the reproducibility of the results.

A bibliometric survey of research trends in vitrimer

The recent trends of vitrimer studies enhance the thermoset material with superior properties, therefore, it is particularly important to address the critical scientific inquiries in this area using their research metrics. The reported vitrimer systems have been highly required for future real-time applications; however, the inquisitiveness of material exchange mechanisms extends the research studies further. Significantly, more scientific information's are required to achieve the evident prospective outcomes via these materials. This article highlights the trends and developments of the most relevant publications, authors, articles, countries, and keywords in the vitrimer research field over the past 10 years. The represented bibliometric survey would elevate the basic understanding of the current vitrimer research stats and also help follow the particular research community to learn and develop insight. To generate bibliometric networks, bibliometric data has obtained from Scopus and visualised in VOS-viewer; as an overview of that, the highest number of publications were from China, United States, France, United Kingdom, and Spain.

Synergistic Covalent-and-Supramolecular Polymers with an Interwoven Topology

Network topologies, especially some high-order topologies, are able to furnish cross-linked polymer materials with enhanced properties without altering their chemical composition. However, the fabrication of such topologically intriguing architectures at the macromolecular level and in-depth insights into their structure-property relationship remain a significant challenge. Herein, we relied on synergistic covalent-and-supramolecular polymers (CSPs) as a platform to prepare a range of polymer networks with an interwoven topology. Specifically, through the sequential supramolecular self-assemblies, the covalent polymers (CPs) and metallosupramolecular polymers (MSPs) could be interwoven in our CSPs by [2]pseudorotaxane cross-links. As a result, the obtained CSPs possessed a topological network that could not only promote the synergistic effect between CPs and MSPs to afford mechanically robust yet dynamic materials but also vest polymers with some functions, as manifested by force-induced hierarchical dissociations of supramolecular interactions and superior thermomechanical stability compared to our previously reported CSP systems. Furthermore, our CSPs exhibited tunable mechanical performance toward multiple stimuli including K⁺ and PPh₃, demonstrating abundant stimuli-responsive properties. We hope that these findings could provide novel opportunities toward achieving topological structures at the macromolecular level and also motivate further explorations of polymeric materials via the way of controlling their topological structures.

Dynamic Ablative Networks: Shapeable Heat-Shielding Materials

Thermoset materials sacrifice recyclability and reshapeability for increased chemical and mechanical robustness because of an immobilized, cross-linked polymeric matrix. The robust material properties of thermosets make them well-suited for applications such as heat-shielding materials (HSMs) or ablatives where excellent thermal stability, good mechanical strength, and high charring ability are paramount. Many of these material properties are characteristic of covalent adaptable networks (CANs), where the static connectivity of thermosets has been replaced with dynamic cross-links. This dynamic connectivity allows network mobility while retaining cross-link connectivity to permit damage repair and reshaping that are traditionally inaccessible for thermoset materials. Herein, we report the synthesis of hybrid inorganic-organic enaminone vitrimers that contain an exceptionally high weight percent of polyhedral oligomeric silsesquioxane (POSS)-derivatives. Polycondensation of β-ketoester-containing POSS with various diamine cross-linkers led to materials with facile tunability, shapeability, predictable glass transition temperatures, good thermal stability, and high residual char mass following thermal degradation. Furthermore, the char materials show notable retention of their preordained shape following decomposition, suggesting their future utility in the design of HSMs with complex detailing.

Circularity in polymers: addressing performance and sustainability challenges using dynamic covalent chemistries

The circularity of current and future polymeric materials is a major focus of fundamental and applied research, as undesirable end-of-life outcomes and waste accumulation are global problems that impact our society. The recycling or repurposing of thermoplastics and thermosets is an attractive solution to these issues, yet both options are encumbered by poor property retention upon reuse, along with heterogeneities in common waste streams that limit property optimization. Dynamic covalent chemistry, when applied to polymeric materials, enables the targeted design of reversible bonds that can be tailored to specific reprocessing conditions to help address conventional recycling challenges. In this review, we highlight the key features of several dynamic covalent chemistries that can promote closed-loop recyclability and we discuss recent synthetic progress towards incorporating these chemistries into new polymers and existing commodity plastics. Next, we outline how dynamic covalent bonds and polymer network structure influence thermomechanical properties related to application and recyclability, with a focus on predictive physical models that describe network rearrangement. Finally, we examine the potential economic and environmental impacts of dynamic covalent polymeric materials in closed-loop processing using elements derived from techno-economic analysis and life-cycle assessment, including minimum selling prices and greenhouse gas emissions. Throughout each section, we discuss interdisciplinary obstacles that hinder the widespread adoption of dynamic polymers and present opportunities and new directions toward the realization of circularity in polymeric materials.

Structure and dynamics of dynamic covalent cross-linked PEOs and PEO/LiPF6 electrolytes: a coarse-grained simulation study

The incorporation of dynamic covalent bonds has been an attractive strategy to synthesize adaptive solid polymer electrolytes (SPEs). Here, we present molecular dynamics results concerning the relationship between ion transport and segmental dynamics for dynamic covalent cross-linked PEO-Li⁺ SPEs. To dissolve LiPF₆ into PEO, a 1/r⁴-form approximation of ion-dipole interactions is employed as the solvation potential. Its parameters are estimated with the assistance of the Bayesian optimization algorithm and validated by comparing the resulting behaviors of PEO/LiPF₆ with experimental observations. The dynamic associations of EO with Li⁺ and PF₆^- significantly reduce the segmental mobility of PEO, verifying the coupling of PEO segmental dynamics with ion transport. In order to reproduce the unique behaviors of associative covalent adaptive networks (CANs), the bond-exchange reaction is controlled by the collision probability and the user-defined activation energy (E_a ≥ 0) based on a hybrid of molecular dynamics and Monte Carlo methods. The dynamics of network topology, facilitated by the reshuffling of dynamic covalent bonds, is analyzed using graph theory. The network mesh size varies with time, which can be considered as one of the characteristics for associative CANs. The reshuffling of dynamic bonds releases the constraint from cross-linked structures, and enhances the long-range segmental mobility as well as the mobilities of Li⁺ and PF₆^-. By drawing comparisons with its conventionally cross-linked counterpart, the effect of dynamic-bond reshuffling on ion transport is studied for the dynamic covalent cross-linked PEO₁₆-LiPF₆ electrolyte in terms of self-diffusivities, cation transference number, and ionic conductivity.

Chemical Recycling of Thiol Epoxy Thermosets via Light-Driven C-C Bond Cleavage

Epoxy thermosets are high-volume materials that play a central role in a wide range of engineering applications; however, technologies to recycle these polymers remain rare. Here, we present a catalytic, light-driven method that enables chemical recycling of industrially relevant thiol epoxy thermosets to their original monomer at ambient temperature. This strategy relies on the proton-coupled electron transfer (PCET) activation of hydroxy groups within the polymer network to generate key alkoxy radicals that promote the fragmentation of the polymer through C-C bond β-scission. The method fully depolymerizes insoluble thiol epoxy thermosets into well-defined mixtures of small-molecule products, which can collectively be converted into the original monomer via a one-step dealkylation process. Notably, this process is selective and efficient even in the presence of other commodity plastics and additives commonly found in commercial applications. These results constitute an important step toward making epoxy thermosets recyclable and more generally exemplify the potential of PCET to offer a more sustainable end-of-life for a diverse array of commercial plastics.

Phase separation in supramolecular and covalent adaptable networks

Phase separation phenomena have been studied widely in the field of polymer science, and were recently also reported for dynamic polymer networks (DPNs). The mechanisms of phase separation in dynamic polymer networks are of particular interest as the reversible nature of the network can participate in the structuring of the micro- and macroscale domains. In this review, we highlight the underlying mechanisms of phase separation in dynamic polymer networks, distinguishing between supramolecular polymer networks and covalent adaptable networks (CANs). Also, we address the synergistic effects between phase separation and reversible bond exchange. We furthermore discuss the effects of phase separation on the material properties, and how this knowledge can be used to enhance and tune material properties.

Combined Catalysis: A Powerful Strategy for Engineering Multifunctional Sustainable Lignin-Based Materials

The production and engineering of sustainable materials through green chemistry will have a major role in our mission of transitioning to a more sustainable society. Here, combined catalysis, which is the integration of two or more catalytic cycles or activation modes, provides innovative chemical reactions and material properties efficiently, whereas the single catalytic cycle or activation mode alone fails in promoting a successful reaction. Polyphenolic lignin with its distinctive structural functions acts as an important template to create materials with versatile properties, such as being tough, antimicrobial, self-healing, adhesive, and environmentally adaptable. Sustainable lignin-based materials are generated by merging the catalytic cycle of the quinone-catechol redox reaction with free radical polymerization or oxidative decarboxylation reaction, which explores a wide range of metallic nanoparticles and metal ions as the catalysts. In this review, we present the recent work on engineering lignin-based multifunctional materials devised through combined catalysis. Despite the fruitful employment of this concept to material design and the fact that engineering has provided multifaceted materials able to solve a broad spectrum of challenges, we envision further exploration and expansion of this important concept in material science beyond the catalytic processes mentioned above. This could be accomplished by taking inspiration from organic synthesis where this concept has been successfully developed and implemented.

Endowing Polythioester Vitrimer with Intrinsic Crystallinity and Chemical Recyclability

Technologically important thermosets face a long-standing end-of-life (EoL) problem of non-reprocessability, a more sustainable solution of which has resolved to nascent vitrimers that can merge the robust material properties of thermosets and the reprocessability of thermoplastics. However, the lifecycle of vitrimers is still finite, as they often suffer from significant deterioration of mechanical performance following multiple reprocessing cycles, analogous to mechanical recycling, and they often show undesired creep under working conditions. To address these two key limitations, we have developed a cross-linked semi-crystalline polythioester with both dynamic covalent bonds and intrinsic crystallinity and chemical recyclability, affording a vitrimeric system that exhibits not only reprocessability and crystallinity-restricted creep but also complete chemical recyclability to initial monomer by catalyzed depolymerization in solution or bulk. Therefore, reported herein is an "infinite" vitrimer system that is empowered with a facile closed-loop EoL option once serial reprocessing deteriorates performance and the material can no longer meet the application requirements. Specifically, the polythioester vitrimer was constructed by copolymerization of a bicyclic thioester with a bis-dithiolane, producing dynamically cross-linked polythioesters with excellent property tunability, from amorphous to semi-crystalline states and melting transition temperatures from 91 to 178 °C.

Vanillin-Based Epoxy Vitrimers: Looking at the Cystamine Hardener from a Different Perspective

Epoxy vitrimers encompass many advantages compared to traditional epoxy materials such as recyclability, repairability, and reprocessability. These properties are induced by the incorporation of dynamic reversible covalent bonds. Recently, the incorporation of aromatic disulfide bridges that are dynamic has expanded the development of new eco-friendly epoxy materials. Herein, we studied a bio-based aliphatic disulfide based on cystamine as a hardener with a vanillin-derived bio-sourced epoxy to prepare fully bio-based epoxy vitrimers. This article provides a comparative study between cystamine and an aromatic disulfide benchmark hardener issued from petrol resources. This work demonstrated that the presence of this aliphatic hardener has a significant influence not only on the reactivity, but most importantly on the resulting dynamic properties. An interesting yet counterintuitive accelerating effect of the dynamic exchanges was clearly demonstrated with only 2 to 20% of molar fraction of cystamine added to the aromatic disulfide formulation. A similar glass transition was obtained compared to the purely aromatic analogue, but relaxation times were decreased by an order of magnitude.

Orthogonal Design and Microstructure Mechanism Analysis of Novel Bentonite Polymer Slurry in Pipe Jacking

The selection of an appropriate slurry ingredient and its percentage ratio is a vital and necessary task for engineers in slurry pipe jacking operations. However, traditional bentonite grouting materials are difficult to degrade because of their single and non-biodegradable composition. Nowadays crosslinked polymers have been widely considered due to their excellent performance and application in engineering practices, which enlighten novel polymer slurry in pipe jacking. This study innovatively proposed using boric acid crosslinked polymers added into polyacrylamide bentonite slurry, which not only solves the shortcomings of traditional grouting materials but also meets the general working performance requirements. The new slurry’s funnel viscosity, filter loss, water dissociation ratio and dynamic shear were tested according to an orthogonal experiment. Single factor range analysis was conducted to identify the optimal mix proportion based on an orthogonal design, and the formation behavior of mineral crystals and microstructure characteristics were evaluated by X-ray diffraction and scanning electron microscopy respectively. According to the results, guar gum and borax form a dense boric acid crosslinked polymer through cross-linking reaction. The internal structure grew tighter and more continuous as the crosslinked polymer concentration grew. It improved the anti-permeability plugging action and viscosity of slurries by 36.1~94.3%. The optimal proportions of sodium bentonite, guar gum, polyacrylamide, borax, and water were 10%, 0.2%, 0.25%, 0.1%, and 89.45% respectively. All these works indicated that the improvement of slurry composition by using boric acid crosslinked polymers was feasible.