Oral health-related quality of life after prosthodontic treatment for patients with partial edentulism: A systematic review and meta-analysis

Oral impact of dental prosthesis use in different patterns of tooth loss

STATEMENT OF PROBLEM

Tooth loss is a critical indicator of oral health and negatively impacts oral health-related quality of life (OHRQoL) depending on the number and location of the missing teeth. Reports of oral rehabilitation have been conflicting depending on the tooth loss pattern and prostheses provided.

PURPOSE

The purpose of this population-based study was to evaluate the association between the use of different dental prostheses according to different tooth loss patterns and OHRQoL.

MATERIAL AND METHODS

A representative sample of 22 843 individuals aged between 15 and 75 years was recruited in Brazil. The dependent variable was the OHRQoL as measured by the score on the oral impact on daily performance (OIDP), and the main predictor was the pattern of tooth loss and prosthesis use. Covariates included sex, age, income, education, missing teeth, dental pain, and dental visits. The zero-inflated negative binomial regression was applied with sampling weights.

RESULTS

Participants with only anterior missing teeth had an OIDP mean ratio, MR) 1.49 times higher than those without tooth loss and not wearing a prosthesis (95% CI=1.12-1.98); those with a distal extension, with anterior tooth loss MR=1.68 (95%CI=1.17-2.43); and complete edentulism in one or both jaws MR=1.53 (95%CI=1.04-2.25). Participants wearing a removable partial denture (RPD) or a combination of an RPD and fixed prostheses with a few missing teeth reported worse OIDP (MR=3.57, 95% CI=2.11-6.04) than those with fixed prostheses only or without a prosthesis. Individuals with edentulism using complete dentures in both jaws had lower OIDP scores (MR=0.9, 95% CI=0.59-1.37) than those using or those who do not use other categories of prosthetic rehabilitation.

CONCLUSIONS

Some types of prosthetic rehabilitation were not associated with better OHRQoL in individuals with tooth loss. The impact of prosthetic rehabilitation was associated with the pattern of tooth loss.

Exploring experiences of living with removable dentures-A scoping review of qualitative literature

OBJECTIVE

Examine the literature on the experiences of living with removable dentures (complete or partial) to identify any gaps and provide a map for future research.

BACKGROUND

Increasing proportions of society are living partially dentate with some form of restoration, including removable dentures. Previous studies have reported on the location, materials and usage of these prostheses, along with effects on oral-health-related quality of life (OHRQoL). However, less is known about experiences with removable dentures from a patient-centred perspective.

METHODS

A scoping review of the qualitative literature was undertaken using the framework of Arksey and O'Malley, updated by Levac et al. Literature searches were carried out using Medline and Web of Science. Papers were screened by title and abstract using inclusion and exclusion criteria. Remaining papers were read in full and excluded if they did not meet the required criteria. Nine papers were included in the final review.

FINDINGS

Key themes from these papers were: impact of tooth loss and living without teeth, and its impacts in relation to social position, appearance, confidence and function (chewing and speaking); social norms and tooth loss, including attitudes to tooth retention and treatment costs, and changes in intergenerational norms towards dentures; expectations of treatment, including patients being more involved in decision making, viewing the denture as a "gift" and dentures helping to achieve "an ideal"; living with a removable denture (complete or partial), including patient preparedness for a denture, adaptation and impacts on activities and participation; and the dentist-patient relationship, including issues with information and communication, and differing priorities between patients and dentists.

CONCLUSION

Little qualitative research exists on experiences of living with a removable denture. Existing literature demonstrates the importance of dispersed activities in differing social, spatial and temporal contexts when wearing removable dentures. Focusing on processes of positive adaptation to dentures and OHRQoL, rather than deficits, is also required to fully understand patients' experiences. Additionally, more complex technological advances may not always be in the best interest of every patient.

Patient-reported outcomes and framework fit accuracy of removable partial dentures fabricated using digital techniques: A systematic review and meta-analysis

PURPOSE

This review aimed to summarize the evidence on patient-reported outcomes and clinical performance of digitally fabricated removable partial dentures (RPDs) compared to traditionally fabricated dentures.

METHODS

Three databases were systematically searched (PubMed, CENTRAL, and Wiley online library) for clinical studies comparing digitally and conventionally fabricated RPDs regardless of data acquisition methods used for fabrication. The Cochrane Collaboration risk of bias assessment tool 2 and the Oxford Center for Evidence-based Medicine tool were used to assess risk of bias, and level of evidence, respectively. Descriptive narrative analysis was used to summarize data on patient-reported outcomes, as there were inadequate studies to pool data in a meta-analysis. A random-effects model was used to analyze the data of framework fit accuracy.

RESULTS

Ten randomized controlled trials were included in the systematic review, and 4 were included in the meta-analysis. Two studies showed that digitally fabricated RPDs are associated with higher patient satisfaction than conventionally fabricated RPDs (with a mean difference of 12.5 mm on a 100-satisfaction scale, p = .008). The pooled standardized mean difference for framework fit accuracy was 0.49 (p = 0.02) in favor of conventionally fabricated RPDs, which showed that conventionally fabricated RPDs have a quantitatively better fit compared to digitally fabricated RPDs. However, clinical evaluation studies showed that both frameworks have clinically acceptable fit.

CONCLUSIONS

Current evidence shows that digitally fabricated RPDs are associated with higher patient satisfaction compared to conventionally fabricated RPDs. However, the scarcity of literature here warrants the generalization of this conclusion. Both digitally and conventionally fabricated metal RPD frameworks showed acceptable fit clinically.

The association between objective and subjective oral health conditions and the presence of anorexia of aging among Japanese older Adults1

Anorexia of aging is a risk factor for malnutrition among older adults. This study aimed to evaluate the association between objective and subjective oral health and anorexia among independent older adults. This cross-sectional study targeted independent older adults aged ≥65 years who participated in the Japan Gerontological Evaluation Study conducted in 2022. The outcome variable was the presence of anorexia, as assessed by the Simplified Nutritional Appetite Questionnaire. Exposure variables were dental status (≥20 teeth, 10-19 teeth with/without dentures, and 0-9 teeth with/without dentures) as objective oral health and oral health-related quality of life measured by five items of the short version of the Oral Impacts on Daily Performances (OIDP) (eating, speaking, smiling, emotional stability, and enjoying with others) as subjective oral health. We fitted the Poisson regression model, including possible confounders, and estimated prevalence ratios (PRs) and 95% confidence intervals. Among 19,787 participants (mean age: 74.6 years [1SD = 6.2], male: 48.5%), 9.0% were classified as having anorexia. After adjusting possible confounders, those with ≤19 teeth had a higher proportion of experiencing anorexia compared to those with ≥20 teeth; however, the association was less pronounced among those with dentures (0-9 teeth with dentures: PR = 1.48 [1.31-1.68], and 0-9 teeth without dentures: PR = 2.08 [1.65-2.63]). Even after adjusting for dental status, each item of OIDP was significantly associated with the presence of anorexia (all p < 0.05). The results showed that both objective and subjective poor oral health were significantly associated with a higher probability of developing anorexia of aging. Therefore, improving both objective and subjective oral health through appropriate dental care could contribute to maintaining appetite in later life.

Implant and implant restoration trends among adults 50 years and older in the United States, National Health and Nutrition Examination Survey 1999-2020

BACKGROUND

Dental implants are an important treatment option in contemporary clinical dentistry. The objective of this study was to determine trends in the prevalence of dental implants and implant-supported restorations in adults 50 years and older across demographic groups over a 20-year period.

METHODS

The authors used data from the National Health and Nutrition Examination Survey collected during 1999-2004, 2009-2014, and 2015-2020 for analyses. The authors used data from 2011 through 2020 to analyze implant-supported restoration trends. Participants 50 years or older were included in the study analytic sample. The primary outcome was the presence of dental implants and implant-supported restorations. Covariates assessed included dentition status, age, sex, race and ethnicity, education, poverty status, and smoking status. The authors used population estimates, weighted percentages, SEs, and logistic regression models for study analyses.

RESULTS

There was a total of 17,114 adults from 1999 through 2020 and 11,292 adults from 2011 through 2020 meeting the inclusion criteria. The prevalence (SE) of at least 1 dental implant increased over time, from 1.3% (0.22%) in 1999-2004 to 8.4% (0.68%) in 2015-2020. In general, those who were non-Hispanic Black, experiencing poverty, and had less than a college education were less likely to have implants than their counterparts.

CONCLUSIONS

Although the overall prevalence of implants has increased over time, disparities in prevalence were observed among certain demographic groups.

PRACTICAL IMPLICATIONS

The use of dental implants in clinical dentistry has increased over time. Future research and policy initiatives could help address disparities in implant prevalence.

Association among the number of teeth, dental prosthesis use, and subjective happiness: A cross-sectional study from the Japan Gerontological Evaluation study (JAGES)

STATEMENT OF PROBLEM

Little is known about the association between the number of teeth and self-rated happiness or the association between dental prosthesis use and self-rated happiness in an older population.

PURPOSE

The purpose of this cross-sectional study was to examine the association between the number remaining of teeth with and without dental prosthesis use and self-rated happiness in an older population.

MATERIAL AND METHODS

The survey data from the 2016 Japan Gerontological Evaluation Study (JAGES) on independent participants aged 65 years or older were assessed. The Poisson regression and multiple imputation methods were used for analyses. Covariates were age, sex, marital status, educational attainment, self-rated health, self-rated economic situation, and symptoms of depression.

RESULTS

The data from 178 090 participants, 81 489 men (45.8%) and 96 601 women (54.2%), were analyzed, with a mean ±standard deviation age of 73.6 ±6.1 years. Overall, 66.4% of the participants were happy, declining to 45.7% in those who had 0 to 9 teeth and no dental prosthesis (n=3102). It was 61.5% in those who had 0 to 9 teeth and used a dental prosthesis (n=41 424), 56.8% in those who had 10 to 19 teeth and no dental prosthesis (n=6719), 65% in those who had 10 to 19 teeth and used a dental prosthesis (n=31 592), 70.5% in those who had ≥20 teeth and no dental prosthesis (n=52 525), and 70.1% in those who had ≥20 teeth and used a dental prosthesis (n=42 728). The interaction analysis showed that the reduction in the probability of being happy among those with fewer teeth was smaller among those who used a dental prosthesis.

CONCLUSIONS

Having a higher number of teeth and using a dental prosthesis were independently associated with being happy. A significant interaction suggested that dental prosthesis use improves happiness among those with moderate to severe tooth loss (<20 remaining teeth).

Fixed partial dentures in adult patients with cleft lip and palate and their relationship with the quality of life: A cross-sectional clinical study

STATEMENT OF PROBLEM

Reports on the impact of fixed partial denture treatments on the quality of life of patients with cleft lip and palate are lacking.

PURPOSE

The purpose of this cross-sectional clinical study was to assess the impact of fixed partial dentures on the quality of life of adults with cleft lip and palate.

MATERIAL AND METHODS

A total of 52 participants (23 women and 29 men) with cleft lip and palate, aged between 20 and 50 years old, and who required treatment with fixed partial dentures were enrolled in the study. They responded to the Oral Health Impact Profile (OHIP)-14 questionnaire before and 30 days after the fixed prosthodontic treatment. The final value from the OHIP-14 was generated by totaling the 14 answers, giving a range from 0 to 56, with higher values indicating a worse relationship between oral health and the quality of life. Nonparametric statistical analysis was performed with the Wilcoxon test (α=.05).

RESULTS

Forty-six participants reported some negative experience before the fixed partial denture, and 48 indicated an improved quality of life 30 days after delivery. All domains assessed showed significant quality of life improvements between the periods compared (P≤.014).

CONCLUSIONS

Oral treatment with fixed partial dentures improved the quality of life in adults with cleft lip and palate.

Effect of different framework materials on stresses induced in distal extension removable partial dentures: A strain gauge analysis

PURPOSE

Evaluation of the strain transmitted to the abutments and residual ridge by polyetherketoneketone material compared to the cobalt-chromium one in distal extension removable partial dentures (RPDs) to fulfill the objective of preservation of the supporting structures.

MATERIALS AND METHODS

A virtual model simulating a Kennedy class I partially edentulous mandibular arch was designed. Two models, one for each group, were printed. Five RPDs were made in each group. In group CR, the framework was milled from a cobalt-chromium alloy. While in group PK, it was milled from a polyetherketoneketone blank. Strain gauge rosettes were bonded distal to the last abutment and posteriorly in the distal end of the residual ridge. Unilateral vertical and oblique loadings were applied. Mann-Whitney U test was used for inter-group comparisons while the Friedman test was used for intra-group comparisons and corrected by Wilcoxon Signed-Rank Sum. The significance level was set at p ≤ 0.05.

RESULTS

During unilateral vertical load application, a statistically significant difference was found between both groups distal to the abutment in the loaded and unloaded sides as well as the residual ridge on the unloaded side. During oblique load application, a statistically significant difference was found between both groups in all slots.

CONCLUSION

Polyetherketoneketone material induces less stress on the abutments and more stress on the residual ridges compared to the cobalt-chromium ones. Therefore, it may be recommended for weak abutments supporting RPDs.

Advancements in Dental Care: The Evolving Landscape of Prosthetic Dentistry

In the dental field, the specialty of prosthodontics stands out as the frontline of innovation, continually pushing the boundaries to enhance both function and aesthetics for optimal oral rehabilitation [...].

Assessment of the Satisfaction of Patients Treated by Undergraduate Dental Students at a Saudi Government University: A Cross Sectional Study

Purpose

The long-term success of any organization is highly dependent on client satisfaction. This applies to the medical and dental fields, where patient satisfaction is considered an indirect indicator of the quality of service provided. This study aimed to assess the level of satisfaction of patients treated by final-year undergraduate students at King Abdulaziz University Dental Hospital (KAUDH).

Patients and Methods

In this cross-sectional study, an online questionnaire was distributed to patients (aged ≥14 years) treated at KAUDH by sixth year students during the academic year 2020/2021. The questionnaire comprised 36 items, including demographic and general data, type of dental problems, type of dental treatment received, and satisfaction assessment based on the Dental Satisfaction Questionnaire. Data were analyzed using one-way ANOVA and independent sample t-tests (α=0.05).

Results

A total of 203 responses were received (58% response rate). The reliability of the satisfaction tool (Cronbach's alpha) was 0.88, indicating a high reliability. The overall satisfaction level was 80.1% (±14.2). The satisfaction levels related to pain management, quality of care, and access to care were 76.4% (±19.9), 86.2% (±17.1), and 77.5% (±16.5) respectively. The highest satisfaction level (91.5%) was related to the quality item "The student was always treating me with respect". Age, number of visits, length of treatment, case severity, and treatment complexity were not significantly correlated with patient satisfaction (p ≥ 0.116). New patients who had their files directly opened by a sixth-year student and were treated immediately were more satisfied than patients who already had files at KAUDH and were referred to sixth-year students for treatment (p=0.029).

Conclusion

Patients treated by final-year students at KAUDH showed high satisfaction levels in relation to pain management, treatment quality, and access. However, the satisfaction of existing old patients was lower than that of new patients, which warrants further assessment, particularly regarding the hospital referral system.

Oral health-related quality of life of conventional removable partial dentures, unilateral nonmetal clasp dentures, and shortened dental arch with 2- or 3-tooth unilateral distal extension tooth loss in the mandible: A randomized, crossover, clinical trial

STATEMENT OF PROBLEM

Conventional removable partial dentures with metal clasps are still a common option for patients with distal-extension tooth loss. However, unilateral nonmetal clasp dentures fabricated by using a thermoplastic denture base resin are increasingly being used. Furthermore, the shortened dental arch concept remains controversial, in spite of being advocated for many years. Nevertheless, these treatment options remain controversial, particularly in patients with the loss of a few distal teeth unilaterally.

PURPOSE

The purpose of this randomized, crossover, clinical trial was to investigate the oral health-related quality of life of participants who requested a new dental prosthesis (unilateral nonmetal clasp dentures or conventional removable partial dentures) at a private practice.

MATERIAL AND METHODS

A 3-period, randomized, crossover design was used in a within-subject, controlled, clinical trial. Twenty-four participants (mean age 59.0 years [7 men: 62.6 {45-85} years; 17 women: 57.5 {24-75} years]) were enrolled. All experimental procedures were approved by the Ethics Committee of Nagasaki University Hospital (#15022313) and registered in the International Standard Randomized Controlled Trial Number registry (ISRCTN49105064). All participants were fully dentate in the maxilla and had unilateral distal-extension loss of 2 or 3 teeth in the mandible. Participants were allocated to 1 of 6 groups and treated with prescribed options in accordance with their allocated sequences and used a dental prosthesis or nothing for 2-week periods. At the end of each intervention, the participants were asked to answer the Oral Health Impact Profile questionnaire. Differences in Oral Health Impact Profile scores among groups were estimated with a mixed-effects model (α=.05).

RESULTS

Total Oral Health Impact Profile scores were higher for unilateral nonmetal clasp dentures (P=.002) and shortened dental arch (P=.049) than for conventional removable partial dentures, with medium and small effects. The unilateral nonmetal clasp dentures had a similar effect compared with shortened dental arch (P>.05). unilateral nonmetal clasp dentures (P=.011) and shortened dental arch (P=.005) demonstrated medium effects in the oral function dimension compared with conventional removable partial dentures. Unilateral nonmetal clasp dentures exhibited large and medium effects in the orofacial appearance dimension compared with conventional removable partial dentures (P=.001) and shortened dental arch (P=.006). In the orofacial pain dimension, shortened dental arch showed effects similar to those of conventional removable partial dentures and unilateral nonmetal clasp dentures (P>.05), and no significant differences were observed in the psychosocial impact dimension (P>.05), but the unilateral nonmetal clasp denture score was lower than the conventional removable partial denture score, with a small effect. Men had significantly lower total Oral Health Impact Profile scores for shortened dental arch than women (P=.033).

CONCLUSIONS

Unilateral nonmetal clasp dentures and shortened dental arch were better than conventional removable partial dentures for the oral health-related quality of life of individuals with unilateral distal-extension tooth loss in the mandible, and sex had a significant effect on removable prosthetic planning.

Impact of dental prosthetic treatment and patients' expectations on the seven domains and four-dimensional scale of the Oral Health Impact Profile

BACKGROUND

Recently, recommendations were given for a new scoring of the Oral Health Impact Profile (OHIP). The original seven domain structure should be replaced by a four-dimensional scale.

OBJECTIVES

To investigate the effect of dental prosthetic treatment on the seven domains and the four-dimensional scale of the OHIP-G49/53 questionnaire.

METHODS

Seventy four patients were grouped according their pre- and post-treatment situation and the type of treatment they received. Patients completed the OHIP-G49/53 questionnaire before prosthetic treatment (T0), and at 1 week (T1), 3 months (T2) and 6 months (T3) after treatment. Treatment effects on the seven domains and the four dimensions of the OHIP scale were analysed, and the oral health-related quality of life (OHRQoL) was measured. Patients' expectations of their prosthetic treatment were also evaluated. Data were analysed using two-way Mixed ANOVA, regression analysis, and Cronbach's alpha test with a level of significance of α ≤ .017.

RESULTS

OHRQoL significantly improved following prosthetic treatment compared with baseline. The largest improvement was found between T0 and T1 evaluations (all p ≤ .001). Unlike the seven-domain scale, the four OHIP dimensions demonstrated further significant improvements across the T1/T2/T3 evaluations (all p ≤ .017). Different pre-treatment findings had different treatment effects on the four OHIP dimensions and seven OHIP domains. Patients' expectations were mainly fulfilled.

CONCLUSION

Compared with the seven-domain scale, the four dimensions showed significant follow-up changes, suggesting the four dimensions are suitable for evaluating treatment effects up to 6 months. Clinically meaningful effects of dental prosthetic treatment can be sensitively measured using the four-dimensional OHIP scale.

Implant-assisted removable partial dentures: Part II. a systematic review of the effects of implant position on the biomechanical behavior

PURPOSE

This systematic review aimed to evaluate the effects of implant placement sites on the biomechanical behavior of implant-assisted removable partial dentures (IARPDs) using finite element analysis (FEA).

STUDY SELECTION

Two reviewers independently conducted manual searches of the PubMed, Scopus, and ProQuest databases for articles investigating implant location in IARPDs using FEA, according to the 2020 Systematic Reviews and Meta-analyses statement. Studies published in English up to August 1, 2022, were included in the analysis based on the critical question.

RESULTS

Seven articles meeting the inclusion criteria were systematically reviewed. Six studies investigated mandibular Kennedy Class I and one study investigated mandibular Kennedy Class II. Implant placement reduced the displacement and stress distribution of the IARPD components, including dental implants and abutment teeth, regardless of the Kennedy Class type and dental implant placement site. Most of the included studies showed that, based on the biomechanical behavior, the molar region, rather than the premolar region, is the preferred implant placement site. None of the selected studies investigated the maxillary Kennedy Class I and II.

CONCLUSIONS

Based on the FEA regarding mandibular IARPDs, we concluded that implant placement in both the premolar and molar regions improves the biomechanical behaviors of IARPD components, regardless of the Kennedy Class. Implant placement in the molar region results in more suitable biomechanical behaviors compared with implant placement in the premolar region in Kennedy Class I. No conclusion was reached for Kennedy Class II due to the lack of relevant studies.

Implant-assisted removable partial dentures: Part I. a scoping review of clinical applications

PURPOSE

This scoping review aimed to systematically map research regarding implant-assisted removable partial dentures (IARPDs), and identify existing gaps in knowledge.

STUDY SELECTION

Two reviewers independently conducted a search of the MEDLINE-PubMed and Scopus databases according to the Preferred Reporting Items for Systematic Review and Meta-Analyses (PRISMA) extension for Scoping Review and included articles published in English up to August 31, 2022, including human studies, reviews, and in vitro studies. Expert opinions, animal studies, and clinical studies involving complete overdentures were excluded, and ten aspects for establishing the treatment strategy for IARPDs were examined.

RESULTS

One hundred and twelve articles were chosen. There were two treatment modalities: IARPDs retained by implant- and tooth-supported surveyed single crowns (SCs) or fixed partial dentures (FPDs). In IARPDs retained by tooth-supported surveyed SCs or FPDs, the survival rate of dental implants for IARPDs was relatively higher with a wide range of marginal bone loss and many complications, but with improved functional performance, oral health-related quality of life, and patient satisfaction. There were limited data on survival or success rates and designs of IARPDs, attachment selections, length and diameter, inclination, placement sites, and loading protocols of implants, regardless of prosthetic types. There was limited information on maxillary IARPDs except for survival rates of implants.

CONCLUSIONS

Although IARPDs could become a useful treatment strategy, there is limited scientific consensus with gaps in knowledge about their use. Additional well-designed clinical and in vitro studies are necessary to scientifically establish IARPDs as definitive prostheses in implant dentistry.

Oral health-related quality of life (OHRQoL) and implant therapy: A prospective multicenter study of preoperative, intermediate, and posttreatment assessment

The purpose of this multicenter continuation study was to use high patient numbers in order to generate reliable statements regarding the association between different implant indications and OHRQoL. Patients with various types of indication for dental implants, ranging from single tooth loss to edentulous jaws, were included. Quality of life relating to dental implants was assessed through the oral health impact profile (OHIP-G-21), which has a summary score from 0 to 20 in healthy patients. In total, 16 253 patients from 29 centers (European Centers for Dental Implantology (ECDI)) were involved in the study between 2009 and 2021.8251 patients (50.7%) completed the questionnaire after implant insertion, and 4996 patients (30.7%) after prosthodontic treatment. The average age was 54 years (range 18-88 years). Posterior single-tooth gap (28.5%) and free-end gap (27.8%) were the most frequent indications. The preoperative OHIP-G-21 score for all patients was 32.81 (SD 11.92), while the score during the healing period was 30.00 (SD 10.72), and after completion of treatment 27.24 (SD 9.26) (p < 0.001). The most significant improvements in OHIP-G-21 scores were in the indication of edentulous jaw (phase 1, 41.81 (SD 15.53); phase 2, 35.39 (SD 14.22); phase 3, 29.60 (SD 10.12) (p < 0.001). The study revealed significant improvements in the most frequently reported problems (chewing, serious concerns, appearance) (p < 0.001). Insertion of dental implants and prosthodontic rehabilitation led to an improved OHRQoL for patients with all indications for dental implants. Special attention should be paid to patients with edentulous jaw, since in comparison with other indications it had the greatest impact on improving OHRQoL. The psychological dissatisfaction scale of the OHIP-G-21 represented the most important factors for patients, and these scores were substantially influenced by implant therapy. Thus, treating physicians should increase their focus on these factors, in order to avoid dissatisfaction and increase the likelihood of complete implant therapy success.

Evaluation of jaw function, oral health-related quality of life, and nutritional status during oral rehabilitation procedures - a pilot study

AIMS

To evaluate limitations in jaw function, oral health-related quality of life (OHRQoL), and nutritional status during extensive oral rehabilitation procedures.

MATERIAL METHODS

Fourteen participants (mean age ± SD: 70 ± 3.8) undergoing major oral rehabilitation involving the restoration of a minimum of eight teeth were recruited in the study. Jaw function limitations scores (JFLS), oral health-impact profile (OHIP), and nutritional status were measured at different time points during, six months, and one year after the rehabilitation procedures. Nutritional status was evaluated by measuring the body weight and arm and calf muscle circumference. The effect of time points on the measured variables was evaluated with Friedman's test. Trends in nutritional status were evaluated with linear regression analysis.

RESULTS

The results of the analysis showed significant main effects of time points on the JLFS (p < .001) and OHIP scores (p = .005). However, there was no effect of time points on the body weight (p = .917) and calf muscle circumference (p = .424), but a significant effect on arm circumference (p = .038). Further, there was a decreasing trend for body weight (64.3%), arm (71.4%), and calf circumference (64.3%) in the majority of the patients.

CONCLUSION

The results of the preliminary study suggest that people undergoing extensive oral rehabilitation procedures show improvement in jaw function and an increase in OHRQoL after the rehabilitation procedure. Despite no major changes in the nutritional indicators, most patients showed a negative trend in their body weight, arm circumference, and calf circumference, suggesting that they may be susceptible to nutritional changes.

New measure of functional tooth loss for successful Oral ageing: a cross-sectional study

BACKGROUND

This cross-sectional study evaluated the impacts of functional tooth loss on oral health-related quality of life (OHRQoL) among elderly people compared with the impacts of several common indicators of oral health. Additionally, the cut-off of functional tooth loss needed for a better OHRQoL was investigated to establish a new measure for successful oral ageing.

METHODS

Data from people aged 65-74 were extracted from the Fourth National Oral Health Survey in Sichuan, China. Functional tooth loss was defined as both natural tooth loss and nonfunctional teeth, such as third molars, residual roots, and removable dentures. The cut-offs of tooth loss were first identified as 12, based on the previous definition of functional dentition (≥20 natural teeth except the third molars), and 14, 16, or 18 for further investigation. OHRQoL was evaluated by the standardized Geriatric Oral Health Assessment Index (sGOHAI) score. Logistic regression was performed to estimate the impacts on OHRQoL. Additionally, subgroup analyses were conducted using the stratified chi-square test to explore the effect of functional tooth loss at each position.

RESULTS

The mean GOHAI score of the 744 participants was 48.25 ± 7.62. Elderly people who had lost ≤12 functional teeth had greater odds of reporting a higher sGOHAI score than those who had lost more functional teeth (odds ratio (OR) 1.49, 95% confidence interval (CI) 1.05-2.11). No significant difference in the sGOHAI score was detected between people who had lost 13-16 functional teeth and those who had lost ≤12 functional teeth (0.61, 0.35-1.07). The loss of second premolars and first and second molars had great impacts on the sGOHAI score when ≤12 or ≤ 16 functional teeth had been lost.

CONCLUSIONS

Compared with natural tooth loss, functional dentition and occluding pairs, functional tooth loss can be a better indicator of OHRQoL in the elderly population. Sixteen remaining functional teeth seem to be sufficient to maintain good OHRQoL and successful oral ageing despite that number being previously acknowledged as ≥20 teeth.

Quality of life in patients in South Korea requiring special care after fixed implants: a retrospective analysis

BACKGROUND

The study on oral health-related quality of life (OHRQoL) of disabled patients is rare but critical for welfare of patients. The aim of this study was to examine the effect of fixed implants in edentulous areas on OHRQoL in Korean disabled patients.

METHODS

The OHRQoL of 63 disabled individuals was evaluated using the Oral Health Impact Profile (OHIP)-14 questionnaires and studied by potential affecting variables such as age, sex, disability severity, and time of disability acquisition. Wilcoxon-signed rank tests were used to examine the OHIP-14 scores for those who had pre/post-fixed implants. Multiple linear regression analysis was used to examine the relationships between factors and OHIP-14 scores before and after implants. A partial correlation analysis was also performed to determine which variables influenced OHIP-14 scores before and after treatment. The Mann-Whitney test was employed for sex and time of disability acquisition analysis (α = 0.05).

RESULTS

Significant improvement was found in OHIP-14 post-implant treatment scores (P < .001). After implant treatment, the severity of disability produced significantly different results (P = .009). Pearson's correlation coefficient between severity of disability and pre/post-implant OHIP-14 scores was 0.265 (P = .030). After controlling for severity of disability, the results showed older patients had lower OHIP-14 scores (P = .032). No differences were found for sex or time of disability acquisition (congenital vs. acquired).

CONCLUSIONS

Fixed implant treatment improved OHRQoL for disabled patients, and the severity of disability was positively correlated with improvement of OHRQoL. For patients with a similar level of disability, the OHRQoL decreased with age.

Prosthetic Oral Rehabilitation with CAD/CAM Suprastructures in Patients with Severe Tissue Deficits: A Case Series

This article presents the outcomes of prosthetic oral rehabilitation using CAD/CAM telescopic bar overdentures in patients with oral cancer (n = 3), severe facial trauma (n = 2), or various syndromes (n = 1), all suffering from severe tissue deficits and requiring complex and comprehensive oral rehabilitation. The aim was to assess the durability and functionality of implant-retained prosthetic structures, ensuring easy oral hygiene and minimizing specialized follow-up needs. The data for this study were sourced from a retrospective cohort at Helsinki University Hospital. The prosthetic reconstruction encompassed the Atlantis 2in1 and the Createch removable telescopic systems. Thus, 40 implants were placed (4 to 7 per patient), with prosthetic structures in the maxilla (n = 4 patients), in the mandible (n = 1), and in both jaws (n = 1). Two patients experienced no complications, two patients had part of the acrylic resin break, and one patient experienced loosening of the bar structure. All complications associated with prosthetic structures were successfully managed, and none of the implants were lost. The follow-up time ranged from 7 to 126 months. This rehabilitation is proved to be an effective solution for patients with complex oral conditions, facilitating both functional restoration and ease of maintenance. These findings underscore the importance of individualized treatment approaches in cases of tissue deficits.

Maxillary sinus membrane elevation and coagulum compared with maxillary sinus floor augmentation and a composite graft: A 1-year single-blinded randomized controlled trial

OBJECTIVE

The aim was to evaluate the 1-year implant outcome and patient-related outcome measures (PROMs) after maxillary sinus membrane elevation and coagulum (test) compared with maxillary sinus floor augmentation and a 1:1 ratio of autogenous bone graft from the buccal antrostomy and deproteinised porcine bone mineral (DPBM) (control).

MATERIALS AND METHODS

Forty patients (30 female, 10 male) with a mean age of 50 years (range 25-71 years) and an alveolar ridge height between 4 and 7 mm were randomly allocated to test or control. Outcome measures included survival of suprastructures and implants, implant stability quotient, health status of the peri-implant tissue, peri-implant marginal bone loss, frequency of complications and PROMs using Oral Health Impact Profile-14 combined with questionnaires assessing patient's perception of the peri-implant soft tissue, implant crown, function of the implant, and total implant treatment outcome using visual analogue scale. Mean differences were expressed with standard deviation and 95% confidence interval. Level of significance was 0.05.

RESULTS

All suprastructures and implants were well-functioning after 1-year of functional implant loading. No significant difference in any of the applied outcome measures was observed between test and control. Both treatments revealed high patient satisfaction scores and significant improvement in oral health-related quality of life.

CONCLUSION

There were no significant differences in implant outcome and PROMs between test and control, after 1-year of functional implant loading. Neither of the treatments can therefore be considered better than the other. Thus, long-term randomized controlled trials are needed before definitive conclusions can be provided about the two treatment modalities.

Research progress of biomimetic materials in oral medicine

Biomimetic materials are able to mimic the structure and functional properties of native tissues especially natural oral tissues. They have attracted growing attention for their potential to achieve configurable and functional reconstruction in oral medicine. Though tremendous progress has been made regarding biomimetic materials, significant challenges still remain in terms of controversy on the mechanism of tooth tissue regeneration, lack of options for manufacturing such materials and insufficiency of in vivo experimental tests in related fields. In this review, the biomimetic materials used in oral medicine are summarized systematically, including tooth defect, tooth loss, periodontal diseases and maxillofacial bone defect. Various theoretical foundations of biomimetic materials research are reviewed, introducing the current and pertinent results. The benefits and limitations of these materials are summed up at the same time. Finally, challenges and potential of this field are discussed. This review provides the framework and support for further research in addition to giving a generally novel and fundamental basis for the utilization of biomimetic materials in the future.

Articulation distortion in Mandarin-speaking individuals with complete arch maxillary implant-supported fixed dental prostheses

STATEMENT OF PROBLEM

Implant-supported fixed dental prostheses (IFPs) have been increasingly used to restore edentulous jaws, yet few studies have utilized acoustic analysis for objective evaluation of postrestoration speech outcomes.

PURPOSE

The purpose of this clinical study was to assess speech articulation in edentulous individuals before and after the provision of IFPs by combining the results of subjective evaluations and objective acoustic analysis parameters.

MATERIAL AND METHODS

The study included thirty-four individuals who had an edentulous maxilla and had been provided with an IFP for over 6 months, along with 6 dentate controls. Acoustic analysis was conducted, and mean opinion scores (MOS) were rated from recordings. The participants were interviewed about perceived speech changes. Changes in the parameters were evaluated using the paired t test or Wilcoxon signed-rank test (α=.05). A comparison between dentate controls and edentulous individuals (with or without prostheses) was made using an independent t test or Mann-Whitney U test (α=.025).

RESULTS

Following restoration, the center of gravity (CoG) changes occurred in 11 of 12 consonants in edentulous individuals (P<.05). Prosthesis use allowed the CoG of all affricates and fricatives to appear larger and closer to control values. Before restoration, the CoG of 9 of 12 consonants in edentulous individuals differed from controls (P<.01); after restoration, this reduced to 3 out of 12 (P<.01). MOS improved in 10 of 12 consonants (P<.01), nearing a score of 4. Despite restoration, the CoG of alveolo-palatals [tɕh], [tɕ], and [ɕ] remained different from controls (P<.01). Most participants were satisfied with the improvement, with few reporting discomfort with alveolars [s] and [tsh].

CONCLUSIONS

IFPs can enhance speech in edentulous individuals, yet articulation distortions of alveolar and alveolo-palatal consonants persist. The improper palatal shape of IFPs or an abrupt joint between the IFP and atrophic natural bone may contribute to these distortions.

Effect of denture cleansers on color stability and surface properties of denture base material containing titanium dioxide nanoparticles

PURPOSE

To investigate the effect of different denture cleansers on color stability, surface roughness, and hardness of polymethylmethacrylate (PMMA) infused with titanium dioxide nanoparticles (TiO2 NPs) at concentrations of 1% and 2% by weight on each.

MATERIALS AND METHODS

In this in vitro study, 90 disc-shaped specimens (10×10×2 mm) were divided into 3 main groups: the non-containing nanoparticle group (0wt% concentration), 1wt% concentration, and 2wt% concentration TiO2 NPs groups. Each group was further assorted into 3 subgroups (n = 10): immersed in distilled water, oxygenating tablet (Corega), and 0.5% sodium hypochlorite. Color change, surface roughness, and hardness values were assessed after 90 and 180 days of storage. Color changes (∆E) were measured with a spectrophotometer (VITA, Easy Shade V, Germany) and assessed using the CIE L*a*b* colorimetric system and the American National Bureau of Standards (NBS = 0.92×∆E). The surface roughness and surface hardness values were measured using a profilometer device and Vickers hardness tester, respectively. First, ANOVA-repeated measurements were performed, followed by the Tukey test. The significance level in this study was considered 0.05.

RESULTS

At all concentrations, there were significant differences in the mean color changes of samples immersed in cleansers compared to distilled water (p < 0.01). Moreover, hypochlorite caused a significant increase compared to Corega at 0wt% concentration after 90 days and at 1wt% concentration after 90 and 180 days. Evaluations also showed that the mean NBS values in all cleanser groups were in the range of appreciable change, except the water group. In addition, only hypochlorite changed the color higher than the clinically acceptable range (∆E >3.7). The mean roughness of samples immersed in hypochlorite at 0wt% concentration was significantly higher than the samples containing TiO2 NPs (p = 0.006). No significant difference was observed in surface roughness of samples containing different concentrations of TiO2 NPs immersed in different cleansers; however, hypochlorite increased the surface roughness of samples without TiO2 NPs compared to samples containing TiO2 NPs after 180 days. The immersion time in cleansers had a significant influence on the surface roughness and hardness while having no effect on the color.

CONCLUSION

In general, the cleansers had a significant effect on color change in all groups compared to distilled water. The adverse effect of hypochlorite was more than Corega. The cleansers in the samples containing TiO2 NPs did not make a significant difference in surface roughness in comparison with the distilled water groups. Surface hardness of the samples was not affected in a steady pattern by the cleansers.

Effectiveness of a 3D simulation tool to teach the designing of metal removable partial dentures: A mixed-method study

INTRODUCTION

Acquiring insights into the framework design of metal-based removable partial dentures (mRPD) is a current challenge in dental education. The aim of the present study was to explore the effectiveness of a novel 3D simulation tool to teach designing mRPD by investigating the learning gain and the acceptance and motivation towards the tool of dental students.

MATERIALS AND METHODS

A 3D tool based on 74 clinical scenarios was developed for teaching the design of mRPD. Fifty-three third year dental students were randomly divided into two groups, with the experimental group (n = 26) having access to the tool during 1 week while the control group (n = 27) had no access. Quantitative analysis was based on a pre- and post-test in order to evaluate the learning gain, technology acceptance and motivation towards using the tool. Moreover, qualitative data was collected by means of an interview and focus group to get additional insights into the quantitative results.

RESULTS

Although the results showed a higher learning gain for students in the experimental condition, the study did not find a significant difference between both conditions based on quantitative results. However, during the focus groups, all students of the experimental group revealed that the 3D tool improved their understanding of mRPD biomechanics. Moreover, survey results revealed that students positively evaluated the perceived usefulness and ease of use of the tool and indicated to have the intention to use the tool in the future. Suggestions were made for a redesign (e.g. creating scenarios themselves) and further implementation of the tool (e.g. analysing the scenarios in pairs or small groups).

CONCLUSION

First results of the evaluation of the new 3D tool for teaching the design framework of mRPD are promising. Further research based on the design-based research methodology is needed to investigate the effects of the redesign on motivation and learning gain.

Oral health and self-rated health in community-dwelling older adults in Colombia

BACKGROUND

The relationship between oral health and specific health conditions, such as cardiovascular disease or cognitive impairment, has been extensively studied. However, the effect of oral health status on self-rated health has not been assessed. This could be relevant in older people considering that poor self-rated health status and oral diseases are highly prevalent in this population. The aim of this study was to determine the association between different parameters of oral health and self-rated health status (SRHS) in Colombian community-dwelling older adults.

METHODS

This is a secondary analysis of the SABE-Colombia study performed in 2015. The dependent variable was defined as the SRHS status assessed by the question "Compared with other people, your age: Do you consider your health status to be better, equal, or worse?" We considered four independent variables: total edentulism considering the high prevalence in older people, the GOHAI score to assess self-rated oral health, and the use of fixed and removable dental prostheses as potential modifiers of oral health. An adjusted ordinal logistic regression was performed by each independent variable.

RESULTS

After the exclusion of missing data, 17,945 persons were included in the final analysis. A total of 10.6% reported worse SRHS, 37.6% reported equal SRHS, and 51.6% reported better SRHS. The worse SRHS group was older and had a higher proportion of dependence, cognitive impairment, and depressive symptoms. The frequency of total edentulism and the lower mean score of GOHAI were significant in the worse SHRS group. An ordinal logistic regression for each independent variable was performed, finding that edentulism increases the probability of worse SHRS, while the GOHAI and use of removable or fixed dental prostheses increase the probability of better SRHS.

CONCLUSION

We found an association between total edentulism, GOHAI Index, the use of dental prostheses (both removable and fixed), and self-rated health status, showing the relevance of oral health status to self-rated health status independent of comorbidities and geriatric syndromes. This result supports the inclusion of oral health evaluation in comprehensive geriatric assessment.

Postinsertion adjustment appointments and their association with cast removable partial denture survival

STATEMENT OF PROBLEM

Successful outcomes with cast removable partial dentures (RPDs) are dependent on adequate fabrication and adjustments at the delivery appointment. Evaluation of the number and frequency of postinsertion follow-up appointments helps determine whether the prosthesis continues to fit comfortably and whether function and esthetics continue to be satisfactory. Reports on the number of appointments and frequency and type of adjustments required for RPDs following insertion are sparse.

PURPOSE

The purpose of this university-based population study was to determine the number of appointments and type of adjustments following RPD insertion and their association with patient demographics, type of RPD, and denture survival.

MATERIAL AND METHODS

This retrospective clinical study examined the records of 257 patients at the University of Toronto, Faculty Dentistry, wearing 308 RPDs inserted between 2013 and 2014 with a 5-year follow-up. The outcome measures investigated included postinsertion appointments, type of adjustments, and denture survival.

RESULTS

A total of 48.1% of the dentures (19.5% tissue supported; and 28.6% tooth supported) were maxillary, and 51.9% (34.7% tissue supported; and 17.2% tooth supported) mandibular. Most patients (68.9%) had 1 to 3 postinsertion appointments, with 78.6% having no major adjustments. Twenty-six dentures failed (failure rate 8.4%), with the failure-free time estimated at 4.58 years (95% confidence interval (CI) 4.42-4.73 years, Kaplan-Meier survival analysis). Failed dentures were significantly associated with more minor adjustments (Mean (M)=4.12, SD=3.90, Kruskal-Wallis (K-W) P=.027; OR=1.18; 95% CI 1.05-1.32, P=.006). More minor adjustments were needed for mandibular dentures (multivariable Poisson regression (MPR) P=.003) compared with maxillary dentures. More major adjustments were needed for maxillary dentures (MPR P=.030) compared with mandibular dentures. More minor and major adjustments were needed for dentures that were remade from within 5 years to beyond 10 years compared with first time denture wearers (MPR P<.001). Patients with musculoskeletal disorders required a significantly higher number of minor adjustments (M=3.67, MPR P<.001) and appointments (M=3.87, MPR P<.001) than those without these disorders.

CONCLUSIONS

The 5-year survival of RPDs following insertion was estimated at 91.6%. Most patients required 1 to 3 appointments after insertion. Mandibular RPDs required significantly more minor adjustments, and maxillary RPDs more major adjustments. More minor and major adjustments were needed for dentures that were remade at any time previously compared with first time denture wearers.

Selective Serotonin Reuptake Inhibitors and Dental Implant Failure: A Systematic Review and Meta-Analysis

Selective serotonin reuptake inhibitors (SSRI) are commonly prescribed to treat mental health disorders, and previously published literature, although scarce, has shown a significant association between SSRI use and dental implant failure. This systematic review and meta-analysis aimed to examine whether such an association exists and, if so, to determine its strength. Reviewers performed an extensive search of the literature, last accessed in June 2022 in PubMed/Medline, Embase, and Cochrane databases using MeSH terms. Retrospective and prospective observational cohort and experimental studies evaluating the role of SSRI on dental implant failure among individuals ≥18 years of age, with a minimum follow-up of 6 months after implant placement, were deemed eligible. The search yielded a total of 6 eligible studies, all retrospective cohorts. Statistical analyses were performed using the statistical software R 4.1.3. Results showed higher implant failure rates among SSRI users vs non-SSRI users at both the patient level (5.6%-19.6% vs 1.9%-8.0%) and the implant level (5.6%-12.5% vs 1.9%-5.8%). The pooled relative risk (RR) of implant failure was more than double among SSRI users at the patient level (pooled RR: 2.44, 95% confidence interval [CI]: 1.68-3.55, P < .01) and at the implant level (pooled RR: 2.34, 95% CI: 1.74-3.15, P < .01) compared with non-SSRI users. DerSimonian and Laird estimates showed homogeneity of the studies (I2 = 0%, P > .05), and funnel plots and Egger's test determined no publication bias across all selected studies at both patient and implant levels. In conclusion, SSRI use is significantly associated with higher implant failure. Providers should be aware of this association and educate patients on the risk of implant therapy when obtaining informed consent.

Can patients detect peri‑implant mucosal inflammation? Results from a multicentre randomized trial

PURPOSE

The objective of this study was to compare patient-reported outcomes (PROs) of peri‑implant soft tissue inflammation and aesthetics around single-tooth implants in the anterior maxillary region with three different implant-abutment interface designs.

METHODS

Participants were randomized to one of three different types of implant-abutment interface designs [Conical (CI), flat-to-flat (FI), and Platform Switched (PS)]. Implants and provisional crowns with prefabricated titanium abutments were placed 5 months following extraction and/or ridge augmentation. Permanent ceramic crowns with zirconia abutments were placed after 12 weeks. To assess PROs, appearance and inflammation questionnaires were completed from provisional crown placement to the 3-year follow-up.

RESULTS

Tooth appearance at the 3-year follow-up revealed a difference amongst CI, FI and PS implants (p=0.049; Kruskal-Wallis test). PS was rated better than FI (p=0.047) at 1 year for appearance of soft-tissue and satisfaction with colour. There were no differences for self-consciousness, smile and pain/discomfort while eating/hard food items.

CONCLUSIONS

Although participants tended to rate the health of mucosa around PS implants as slighty better than the other two implant systems, the differences were minimal and inconsistent. Thus, patient satisfaction in terms self-perceived gingival health and esthetics was high for all 3 systems tested, suggesting that patients are unable to detect mucosal inflammation.

CLINICAL SIGNIFICANCE

Patients find it difficult to perceive mucosal inflammation; hence, it is recommended that patients attend implant follow-up visits, even if they do not perceive inflammation. The study suggests that there is a relationship between the PROs and the clinical outcomes of tested implants.

Influence of Periodontal Status and Prosthetic Treatment on Survival and Success Rates in Implant Therapy: A 5-Year Retrospective Follow-Up Study

The objective of the present study was to evaluate the 5-year outcome of dental implant therapy and assess the survival, success, and biological and technical complications. A periodontal and prosthetic-oriented evaluation was conducted on the variables that can influence the long-term predictability of implant therapy. A total of 615 patients and 1427 dental implants from a private clinic (MedArtis Dent, Cluj-Napoca, Romania) were enrolled in the study. The study was a longitudinal cohort with data collected retrospectively from physical/digital dental records in combination with a cross-sectional clinical/radiological examination. Results showed that periodontal diagnosis at baseline had a significant impact on the marginal bone loss prediction. Data showed that the cylindrical implant with an internal 45° medium taper connection experienced a higher rate of bone resorption compared to the tapered implant with the 5° internal connection. Screw-retained restorations and overdentures showed a statistical decrease in the marginal bone level height when compared to the cemented restorations. Data from our study suggest that not only is there a powerful association between recall visits and the rate of complications in dental implant treatment, but a lack of professional maintenance predicts a higher bone level loss during the 5-year interval.

Cone-Beam Computed Tomography and Histological Findings for Socket Preservation Techniques Using Different Grafting Materials: A Systematic Review

OBJECTIVE

Socket preservation techniques have been used to maintain the ridge dimension following tooth extraction. The materials used influence the quality and quantity of newly formed bone. Therefore, the aim of this article was to systematically review the literature reporting both histological and radiographic outcomes of socket preservation techniques after tooth extraction in human subjects.

MATERIAL AND METHOD

A systematic electronic search was performed in the electronic databases. English language clinical studies that were published between 2017 and 2022 and included both histological and radiographic findings for the test and control groups. Our primary search produced 848 articles, and of these, 215 were duplicate studies. A total of 72 articles were then eligible for full-text reading.

RESULTS

The review included eight studies that met its inclusion criteria. Three outcomes were compared in the included studies. The percentage of newly formed bone ranged from 21.34 ± 9.14% to more than 50% of new bone formation. The materials that showed more than 50% of newly formed bone formation were demineralized dentin graft, platelet-rich fibrin, freeze-dried bone allograft, corticocancellous porcine, and autogenous bone. Four Studies did not report the percentage of the residual graft materials, while those who reported showed a variable range of a minimum 1.5% to more than 25%. One study did not report the changes in horizontal width at the follow-up period, while other studies ranged from 0.6 mm to 10 mm.

CONCLUSION

Socket preservation represents an efficient technique to preserve the ridge contour with satisfactory newly formed bone in the augmented site and maintaining the vertical and horizontal dimensions of the ridge.

Associated factors of prosthetic rehabilitation in specialized dental care in Brazil: a cross-sectional study

OBJECTIVE

This study aimed to analyze the individual and contextual factors associated with prosthetic rehabilitation in Dental Specialty Centers (DSC) in Brazil. A cross-sectional study, with secondary data from modules II and III of the External Assessment of the 2nd Cycle of the National Program for the Improvement of Access and Quality (PMAQ) of DSCs, was conducted in 2018. Individual variables considered were socioeconomic conditions and perceptions about the structure and service of the DSC. Contextual variables were related to DSC. We considered the region of the country (capital or countryside), geographic location and work process of the DSC for prosthetic rehabilitation. The association between individual and contextual variables and prosthetic rehabilitation in the DSC was analyzed by multilevel logistic regression.

RESULTS

Ten thousand three hundred ninety-one users from 1,042 DSC participated. Of these, 24.4% used dental prosthesis and 26.0% performed at the DSC. In the final analysis, performed dental prostheses in the DSC individuals with less education (OR = 1.23; CI95%:1.01-1.50) and residents of the same city as the DSC (OR = 1.69; CI95%:1.07-2.66), at a contextual level, DSCs of the countryside (OR = 1.41; CI95%:1.01-1.97) were associated with the outcome. Individual and contextual factors were associated with prosthetic rehabilitation in the DSC.

Effects of Blood Contamination and Decontamination Protocol on Reverse Torque Value of Abutment Screws in Dental Implants: An In Vitro Study

Background and Objective: Loosening of abutment screws in dental implants is a mechanical complication that affects prosthetic treatments and hence, patient satisfaction. Blood contamination of abutment screws may play a role in this phenomenon. However, only limited research attention has been given to this issue. In the present study, we determined the effect of blood contamination and decontamination protocol on the reverse torque value (RTV) of abutment screws. Materials and Methods: A questionnaire-based survey was sent to 210 implantologists requesting feedback on their attitude to the blood contamination issue and the decontamination protocols used. The survey responses were used in a selection of the decontamination solutions that were used in the subsequent in vitro study on the effects of blood decontamination protocol on the RTV of abutment screws. Thus, three study groups were used (n = 20 abutment screws in each group): Group 1 (control group; blood-contaminated screws); Group 2 (screws decontaminated with 5.25% sodium hypochlorite (NaOCl) solution); and Group 3 (screws decontaminated with normal saline solution (0.9%)). Then, each of the connections were subjected to thermocycling, and RTVs of the screw were measured using a digital torque meter. Intragroup and intergroup RTVs were analyzed for significance using analysis of variance (ANOVA) and Tukey's honestly significant difference (HSD) tests. Results: 48% of the implantologists responded to the survey; 80% of them were concerned with blood contamination in the implant connection, especially before abutment loading and 85% of them used either chlorhexidine solution or normal saline solution as the decontamination agent. The mean RTV for Group 2 screws (30.27 ± 2.8 N.cm) was significantly greater than that for Group 3 screws (26.02 ± 1.99 N.cm) which, in turn, was significantly greater than that for Group 1 screws (23.64 ± 1.84 N.cm). Conclusion: Decontamination of blood-covered connections using 5.25% NaOCl solution or normal saline solution restores the RTV of abutment screws. This finding may have clinical relevance in that the decontaminated screws may contribute to the low incidence of screw loosening and, ultimately, improved patient satisfaction.

Does remaining teeth and dental prosthesis associate with social isolation? A six-year longitudinal study from the Japan Gerontological Evaluation Study (JAGES)

OBJECTIVES

Social isolation was associated with increased mortality and numerous adverse health outcomes. However, the longitudinal association between oral health and social isolation has not been studied. In this longitudinal prospective cohort study, the association between the number of remaining teeth and dental prosthesis use with social isolation after 6-years follow-up was examined.

METHODS

Functionally independent adults aged 65 years or older, who were not socially isolated in 2010, were followed up until 2016 in the Japan Gerontological Evaluation Study. Data from 26 417 participants were analysed after random forest imputation to address missing data. Logistic regression models were used to calculate the odds ratio (OR) for incident social isolation in 2016 after adjusting for age, sex, educational attainment, income, activities of daily living, living area and having depressive symptoms.

RESULTS

The mean age of the participants at baseline was 72.3 (SD = 5.0). A total of 1,127 (4.3%) participants were socially isolated at follow-up. Of these, 338 (3.2%) had ≥20 teeth (with or without using dental prosthesis), 171 (3.9%) had 10-19 teeth and used dental prosthesis, 112 (4.2%) had 10-19 teeth and did not use the dental prosthesis, 338 (5.1%) had 0-9 teeth and used dental prosthesis, and 168 (7.6%) had 0-9 teeth and did not use the dental prosthesis. Fully adjusted logistic regression models showed that the OR of incident social isolation was higher for those with fewer teeth; OR = 1.13 (95%CI = 0.96-1.33) for those with 10-19 teeth and OR = 1.36 (95%CI = 1.17-1.58) for those with 0-9 teeth, compared to those with ≥20 teeth. The OR of incident social isolation was lower for those who used a dental prosthesis [OR = 0.90, 95%CI = 0.80-1.02)] compared to those who did not use a dental prosthesis. The interaction between the number of teeth and dental prosthesis use demonstrated that the latter mitigated the incidence of social isolation for participants with tooth loss. Compared to those with ≥20 teeth (with or without prosthesis use), participants with 0-9 teeth that did not use a dental prosthesis were 79% [OR = 1.79, 95%CI = 1.49-2.19] more likely to be socially isolated, whereas participants with 0-9 teeth that used a dental prosthesis were only 23% [OR = 1.23, 95%CI = 1.05-1.45] more likely to be socially isolated.

CONCLUSION

Tooth loss was the main predictor for social isolation at follow-up, while no dental prostheses use was an additional risk factor. Dental prosthesis use may reduce the risk of social isolation especially in those with severe tooth loss.

Effect of hemispherical dimples at titanium implant abutments for the retention of cemented crowns

PURPOSE

The aim of this study was to assess the effect of hemispherical dimple structures on the retention of cobalt-chromium (Co-Cr) crowns cemented to titanium abutments, with different heights and numbers of dimples on the axial walls.

MATERIALS AND METHODS

3.0-mm and 6.0-mm abutments (N = 180) and Co-Cr crowns were prepared. The experimental groups were divided into two and four dimple groups. The crowns were cemented by TempBond and PANAVIA F 2.0 cements. The retention forces were measured after thermal treatments. A two-way Analysis of Variance (ANOVA) and post-hoc Tukey HSD test were conducted to analyze change in retention forces by use of dimples between groups, as well as t test for the effect of abutment height change (α = .05).

RESULTS

Results of the two-way ANOVA showed a statistically significant difference in retention force due to the use of dimples, regardless of the types of cements used (P < .001). A significantly higher mean retention forces were observed in the groups with dimples than in the control group, using the post hoc Tukey HSD test (P < .001). Results of t test displayed a statistically significant increase in the retention force with 6.0-mm abutments compared with 3.0-mm abutments (P < .001). The groups without dimples revealed adhesive failure of cements, while the groups with dimples showed mixed failure of cements.

CONCLUSION

Use of hemispherical dimples was effective for increasing retention forces of cemented crowns.

Oral health-related quality of life (OHRQoL) after rehabilitation with removable partial dentures (RPDs): A systematic review and meta-analysis

OBJECTIVES

To summarise evidence on the change in oral health-related quality of life (OHRQoL) before and after rehabilitation with removable partial dentures (RPDs) amongst partially edentulous adults.

DATA

Studies assessing OHRQoL amongst patients aged ≥18 years, before and after rehabilitation with RPDs of any type and design, were included. The quality of included studies was evaluated using the Cochrane risk of bias tools. Meta-analysis was conducted using a random-effect model.

SOURCES

MEDLINE, EMBASE and CENTRAL, up to March 29, 2022.

STUDY SELECTION AND RESULTS

Thirteen studies were eligible and eight were included in the meta-analysis. The studies had moderate to serious risk of bias. There was a very low level of certainty that OHRQoL, as measured using OHIP-14, improved 3 months after RPDs were fitted (222 participants, MD: -12.0, 95% CI: -16.1, -7.9, p<0.001) and after 6 months (101 participants, MD: -10.5, 95% CI: -16.4, -4.6, p<0.001). At 12 months post-treatment, RPD rehabilitation did not result in statistically significant improvement in OHIP-14 scores (62 participants, MD: -12.7, 95% CI: -26.1, 0.6, p = 0.06). However, the assessment using OHIP-49 at 12 months showed significant improvement (87 participants, MD: -34.8, 95% CI: -41.9, -27.7, p<0.001), with low certainty of evidence.

CONCLUSIONS

Based on the limited evidence available, this review found that RPD rehabilitation appear to improve OHRQoL in the short term up to 6 months, with a very low level of certainty. The long-term effect of RPD treatment on OHRQoL after 12 months is inconclusive. There is currently insufficient evidence on the effect of RPD treatment on OHRQoL. This review highlights the need for more and better quality studies.

CLINICAL SIGNIFICANCE

Data on RPD outcomes are summarised, aiding clinicians in providing evidence-based patient-centred care that matches patients' needs and expectations. Recommendations for future research were also highlighted.

REGISTRATION

PROSPERO CRD42022328606.

Evaluating the relation of posterior occlusal plane to ala-tragal line according to age and sex

INTRODUCTION

Occlusal plane orientation affects the esthetic, function, and success of removable or fixed prostheses. The most prevalent index for determination of this plane is the ala-tragus line while there are controversies in the exact location of tragus reference point.

Evaluation of biofilm formation on acrylic resins used to fabricate dental temporary restorations with the use of 3D printing technology

Background

Temporary implant-retained restorations are required to support function and esthetics of the masticatory system until the final restoration is completed and delivered. Acrylic resins are commonly used in prosthetic dentistry and lately they have been used in three-dimensional (3D) printing technology. Since this technology it is fairly new, the number of studies on their susceptibility to microbial adhesion is low. Restorations placed even for a short period of time may become the reservoir for microorganisms that may affect the peri-implant tissues and trigger inflammation endangering further procedures. The aim of the study was to test the biofilm formation on acrylamide resins used to fabricate temporary restorations in 3D printing technology and to assess if the post-processing impacts microbial adhesion.

Methods

Disk-shaped samples were manufactured using the 3D printing technique from three commercially available UV-curable resins consisting of acrylate and methacrylate oligomers with various time and inhibitors of polymerization (NextDent MFH bleach, NextDent 3D Plus, MazicD Temp). The tested samples were raw, polished and glazed. The ability to create biofilm by oral streptococci (S. mutans, S. sanguinis, S. oralis, S. mitis) was tested, as well as species with higher pathogenic potential: Staphylococcus aureus, Staphylococcus epidermidis and Candida albicans. The roughness of the materials was measured by an atomic force microscope. Biofilm formation was assessed after 72 h of incubation by crystal violet staining with absorbance measurement, quantification of viable microorganisms, and imaging with a scanning electron microscope (SEM).

Results

Each tested species formed the biofilm on the samples of all three resins. Post-production processing resulted in reduced roughness parameters and biofilm abundance. Polishing and glazing reduced roughness parameters significantly in the NextDent resin group, while glazing alone caused significant surface smoothing in Mazic Temp. A thin layer of microbial biofilm covered glazed resin surfaces with a small number of microorganisms for all tested strains except S. oralis and S. epidermidis, while raw and polished surfaces were covered with a dense biofilm, rich in microorganisms.

Conclusions

UV-curing acrylic resins used for fabricating temporary restorations in the 3D technology are the interim solution, but are susceptible to adhesion and biofilm formation by oral streptococci, staphylococci and Candida. Post-processing and particularly glazing process significantly reduce bacterial biofilm formation and the risk of failure of final restoration.

Supplementary Information

The online version contains supplementary material available at 10.1186/s12903-022-02488-5.

Volumetric Evaluations of Full-Arch Implant Supported Restorations and Their Role on Patients’ Quality of Life: A Mixed-Model Analysis

Introduction

Full-arch, implant-supported hybrid restorations, employing tilted implants, can offer an efficient way of treating edentulous patients. Several factors, such as the timing of implant placement and the inclination of the fixture, can have a detrimental effect on their stability. This retrospective study is aimed at discerning the role played by those factors.

Materials and Methods

Patients treated with full-arch, implant supported restorations were selected for this study; cone-beam computed tomography (CBCT) images, taken 3 months and 3 years after delivery of the final restoration, as well as peri-implant values, were obtained and compared; bone loss was measured on four sites for each implant and then averaged. These patients were recalled, and the OHIP-5 questionnaire was administered.

Results

21 patients, with a mean age of 53 years, were included in the present analysis. 108 implants were placed, and 25 Toronto prostheses were delivered. According to a mixed-model analysis, tilted implants (0.51, p < 0.001) had a higher rate of bone loss, while implants placed in a healed ridge suffered less bone loss than immediate implants (-0.21, p < 0.001). Patient-level variables have a significant effect on this variable, as implants coming from the same subject share a similar risk of bone loss. The mean response to the self-administered OHIP-5 questionnaire was 1.53 ± 0.29; other variables did not have a statistically significant effect on this outcome. Discussion/Conclusions. The results of the present study show that Toronto bridges prostheses are an efficient procedure for treating edentulous patients, as their oral-related quality of life is reported as satisfactory even 7 years after delivery of the restoration. Tilted and immediate implants are more at risk of bone loss. Implants coming from the same subject share a similar risk of bone loss.

Radiographically screened periodontitis is associated with deteriorated oral-health quality of life: A cross-sectional study

Periodontitis is greatly related to worse perceived oral health-related quality of life (OHRQoL), yet this association has never been explored using radiographically screened periodontal bone loss. Here we have radiographically screened patients for periodontitis via a validated method and assessed its association with measures of OHRQoL. From a total of 10,267 participants (6,112 females and 4,155 males), self-reported general health questionnaire, body mass index, self-reported oral health behaviours, panoramic x-rays and the oral health impact profile (OHIP-14) were gathered. Radiographically screened periodontitis was measured through a radiographic-based periodontal bone loss (R-PBL) approach. We compared the respective variables according to the R-PBL status and explored using multiple logistic regression adjusted for the significant variables. Overall, patients with periodontitis shown significantly different sociodemographic, health measures and oral hygiene characteristics. All domains of the OHIP-14 were significantly worsened in the periodontitis group, and further confirmed through adjusted logistic regression (p<0.001). Active smoking, number of missing teeth, sex and age were the most impactful variables in this relationship. Our results demonstrate the existence of a link between radiographically screened periodontitis and OHRQoL, mostly upheld by active smoking, number of missing teeth, sex and age.

Patient-reported outcome measures of digitally versus conventionally constructed removable dentures: a systematic review protocol

OBJECTIVE

This review will evaluate patient-reported outcome measures of treatment with digitally fabricated versus conventionally manufactured removable dental prostheses in partially or completely edentate adults.

INTRODUCTION

Compared with conventionally manufactured dental prostheses, digitally fabricated prostheses may simplify and reduce the number of clinical steps and minimize errors in the production of prostheses without compromising occlusal accuracy and fit. This may, in turn, improve patient satisfaction, ability to speak, esthetics, stability, and oral health status. Determining evidence of patient-reported outcomes will assist the dental practitioner when communicating patient expectations.

INCLUSION CRITERIA

This review will consider experimental and quasi-experimental study designs, including randomized and non-randomized controlled trials, comparative clinical studies, prospective or retrospective trials, longitudinal clinical studies, clinical reports, and technique articles. The review will include patient-reported outcome measures from fully or partially edentulous adult participants who received either conventionally or digitally fabricated dental prostheses.

METHODS

The following databases will be searched for scientific, peer-reviewed literature: Academic Search Complete, CINAHL, Dentistry and Oral Sciences (all via EBSCO), MEDLINE (PubMed), ScienceDirect, and Cochrane Central Register of Controlled Trials. The search strategy will include terms relevant to the intervention, which will be adapted for each bibliographic database, in combination with database-specific filters, where available. The language restriction will be English and Dutch. All included studies will be critically appraised and data will be extracted for synthesis. If possible, a meta-analysis will be conducted. The Grading of Recommendations, Assessment, Development and Evaluation approach will be followed to evaluate the certainty of evidence.

SYSTEMATIC REVIEW REGISTRATION NUMBER

PROSPERO CRD42018094357.

Three-dimensional printing of clinical scale and personalized calcium phosphate scaffolds for alveolar bone reconstruction

OBJECTIVE

Alveolar bone defects can be highly variable in their morphology and, as the defect size increases, they become more challenging to treat with currently available therapeutics and biomaterials. This investigation sought to devise a protocol for fabricating customized clinical scale and patient-specific, bioceramic scaffolds for reconstruction of large alveolar bone defects.

METHODS

Two types of calcium phosphate (CaP)-based bioceramic scaffolds (alginate/β-TCP and hydroxyapatite/α-TCP, hereafter referred to as hybrid CaP and Osteoink™, respectively) were designed, 3D printed, and their biocompatibility with alveolar bone marrow stem cells and mechanical properties were determined. Following scaffold optimization, a workflow was developed to use cone beam computed tomographic (CBCT) imaging to design and 3D print, defect-specific bioceramic scaffolds for clinical-scale bone defects.

RESULTS

Osteoink™ scaffolds had the highest compressive strength when compared to hybrid CaP with different infill orientation. In cell culture medium, hybrid CaP degradation resulted in decreased pH (6.3) and toxicity to stem cells; however, OsteoInk™ scaffolds maintained a stable pH (7.2) in culture and passed the ISO standard for cytotoxicity. Finally, a clinically feasible laboratory workflow was developed and evaluated using CBCT imaging to engineer customized and defect-specific CaP scaffolds using OsteoInk™. It was determined that printed scaffolds had a high degree of accuracy to fit the respective clinical defects for which they were designed (0.27 mm morphological deviation of printed scaffolds from digital design).

SIGNIFICANCE

From patient to patient, large alveolar bone defects are difficult to treat due to high variability in their complex morphologies and architecture. Our findings shows that Osteoink™ is a biocompatible material for 3D printing of clinically acceptable, patient-specific scaffolds with precision-fit for use in alveolar bone reconstructive procedures. Collectively, emerging digital technologies including CBCT imaging, 3D surgical planning, and (bio)printing can be integrated to address this unmet clinical challenge.

Masticatory index for patients wearing dental prosthesis as alternative to conventional masticatory ability measures

OBJECTIVES

The study objectives were: 1) to develop a masticatory index for evaluating masticatory ability in patients wearing a dental prosthesis, including complete dentures (CD), removable partial denture (RPD), and fixed partial denture (FPD), 2) to test the reliability and validity of the index, and 3) to determine whether the index better reflected patients' masticatory ability compared with conventional subjective and objective measures.

METHODS

The present cross-sectional study consisted of 2 phases: 1) developing the Chulalongkorn University masticatory index (CUMI) consisting of 20 food items in 5 masticatory difficulty grades using a 3-point Likert scale, and 2) application of the CUMI in 110 patients wearing a dental prosthesis, including CD, RPD, and FPD (control group). The CUMI test-retest reliability was reevaluated 2 weeks later. The convergent validity was compared with objective masticatory performance evaluated with a standard peanut chewing test, and subjective eating impacts evaluated by the Oral Impacts on Daily Performances Index. Oral and denture status were determined clinically. The associations between CUMI score, peanut particle size, and eating impact score was identified using Spearman's correlation coefficient. To evaluate discriminant validity, the associations between masticatory ability measurements and oral and denture status were analyzed using regression analyses.

RESULTS

The CUMI's Cronbach's alpha and intraclass correlation coefficient values were 0.89 and 0.95, respectively. The convergent validity was shown by significant associations between the increased CUMI score, smaller peanut particle size and decreased eating impact score. Multivariable analyses found that the CUMI score, peanut particle size, and percentage of having an eating impact were significantly associated with the number of remaining teeth and posterior occluding pairs, and type and quality of dental prosthesis. However, the CUMI demonstrated better discriminant validity because significant dose-response relationships were found only between the decreased CUMI score and increased tooth loss severity, and unacceptable denture quality. Adjusted R2 values of the CUMI models were the highest, followed by those of peanut particle size and eating impact.

CONCLUSION

CUMI is a reliable and valid tool to evaluate masticatory ability of patients wearing a dental prosthesis, including CD, RPD, and FPD. Due to a better discriminant validity, the CUMI better reflects masticatory ability of patients compared with conventional subjective and objective masticatory ability measures.

The Effect of the COVID-19 Pandemic on Patient Selection, Surgical Procedures, and Postoperative Complications in a Specialized Dental Implant Clinic

During the coronavirus disease 2019 (COVID-19) pandemic, aerosol-generating procedures, including dental implant treatments, are considered high-risk. With dental implant treatment mostly an elective procedure, we aimed to assess whether the pandemic influenced patient selection, surgical procedures, and postoperative complications. We compared dental implant treatments during (March to December 2020) and before (December 2018 to February 2020) the COVID-19 pandemic based on patient and implant parameters, as well as postoperative complications. For analysis, we used the Chi-squared test with the Holm–Sidak correction for multiple comparisons. The number of implants placed during the COVID-19 pandemic (696 implants in 406 patients, 70 implants per month) was comparable to pre-pandemic levels (1204 implants in 616 patients, 80 implants per month). Regarding patient parameters, there were no significant differences in respiratory (p = 0.69) and cardiovascular conditions (p = 0.06), diabetes (p = 0.69), and smoking (p = 0.68). Regarding implant parameters, there was a significant difference in the distribution of augmentative procedures (no augmentation, guided bone regeneration, and sinus floor elevation, p = 0.01), but no significant differences in the types of edentulous spaces (p = 0.19) and the timing of implant placement (p = 0.52). Regarding complications, there were significantly fewer minor complications (p < 0.001) and early (i.e., before loading) implant failures (p = 0.02) compared with pre-pandemic levels. Our results suggest that the COVID-19 pandemic had no effect on patient selection and only a slight effect on the surgical procedures. However, postoperative complications, including early failures, were significantly less prevalent during the pandemic.

Custom Made Device for Removal of Removable Partial Denture in a Patient with Manual Impairment

Manual impairment could be part of the clinical presentation of a number of systemic conditions or traumas. Inability to successfully remove a removable partial denture is one of the contraindications of this type of treatment. This report presents a technique for fabrication of a custom device made chairside to assist a manually impaired patient due to osteoarthritis with the removal of a removable mandibular prosthesis. This technique could allow patients with similar conditions to replace their missing teeth with removable partial dentures, in cases where a fixed restoration is not an option.

Professional and patient-reported outcomes of two surgical approaches for implant-supported single-crown restoration: 1-year results of a randomized controlled clinical trial

OBJECTIVES

To test whether there is a difference in professional and patient-reported outcome measures (PROM) after single-crown restoration supported by short implants (SI) (6 mm) compared with standard length implants (SLI) (13 mm) in conjunction with maxillary sinus floor augmentation (MSFA) after 1 year of functional implant loading.

MATERIAL AND METHODS

Forty patients were randomly allocated to SI or SLI/MSFA. PROM included Oral Health Impact Profile (OHIP-14) questionnaire and subjective assessment of the peri-implant soft tissue (A), implant crown (B), implant function (C) and overall implant treatment outcome (D) using visual analogue scale (VAS). Professional assessment included pink aesthetic score (PES) and white aesthetic score (WES).

RESULTS

No significant differences in professional or PROM between the two treatment modalities were revealed at any time point (p > .05). OHIP-14 score decreased at baseline and 1 year after functional implant loading compared with preoperative measurements indicating improved quality of life with both treatment modalities. The 1-year mean VAS score was 9.4 (A), 9.3 (B), 9.6 (C) and 9.3 (D) for SI compared with 9.3 (A), 9.6 (B), 9.7 (C) and 9.2 (D) for SLI. The 1-year mean PES/WES scores were 11.3 and 8.1 for SI compared with 11.2 and 8.1 for SLI/MSFA.

CONCLUSIONS

Prosthetic rehabilitation of the posterior part of the maxilla with SI or SLI/MSFA revealed no significant differences in professional and PROM after 1 year of implant loading.

Impact of rehabilitation versus edentulism on systemic health and quality of life in patients affected by periodontitis: A systematic review and meta-analysis

AIM

To investigate the effect of rehabilitation in fully/partially edentulous patients with stage IV periodontitis on oral-health-related quality of life (OHRQoL) and systemic health.

MATERIALS AND METHODS

A systematic electronic and manual search was conducted. Three authors independently reviewed, selected, and extracted the data. Outcomes were OHRQoL (Oral Health Impact Profile 14 [OHIP-14] and OHIP-49, General Oral Health Assessment Index [GOHAI], visual analogue scale, symptoms registration) and systemic health-related outcomes (incidence and prevalence of systemic diseases, values of systemic disease indicators). Qualitative data were synthesized for OHRQoL and systemic health-related outcomes. Meta-analysis was conducted on available quantitative data.

RESULTS

The search identified 59 articles (6724 subjects in total). OHRQoL improved across all the studies, irrespective of the number of missing teeth, their location, or treatment modality. Meta-analysis showed significant improvement of OHIP-49 (36.86, p < .01) in manuscripts including subjects affected by periodontitis, consistently with the remaining literature (reduction of score points post rehabilitation: OHIP-14 = 10.52, OHIP-49 = 56.02, GOHAI = 5.40, p < .01 for all). Non-rehabilitated subjects exhibited inferior cognitive status, higher medication intake, and frailty. However, our data are limited and should be interpreted with caution.

CONCLUSIONS

Oral rehabilitation improves OHRQoL and, potentially, systemic health in edentulous patients. It is unclear whether these findings may be extrapolated to patients with stage IV periodontitis.

The impacts of prosthetic interventions on mastication predominance in Kennedy Class Ⅱ patients

Purpose The purpose of this study was to investigate the effects of prosthetic interventions in patients with Kennedy Class Ⅱ (unilateral missing posterior teeth) on mastication predominance.Methods The subjects comprised patients with Kennedy Class II and healthy dentate volunteers (HD group). The subjects were asked to freely chew the test foods (chewing gum, beef jerky, and peanuts). Electromyographic activity of the bilateral masseter muscles was recorded twice (before and after prosthetic intervention). The chewing side (right or left) was judged by the level of the root mean square electromyographic amplitude. Mastication predominance was assessed using the mastication predominance index (MPI; range 0-100%). Each patient was restored with a removable partial denture (RPD) or an implant-supported fixed prosthesis (IFP). The effects of prosthetic interventions were statistically evaluated by the differences between MPI before and after prosthetic interventions (pre-MPI and post-MPI , respectively).Results There was a significant difference between pre-MPI of patients with Kennedy Class II and MPI of the HD group (HD-MPI) for all test foods (P < 0.0001). Statistical analysis also demonstrated a significant difference between pre-MPI and post-MPI measured with each of the three food items in both the RPD and IFP groups (P < 0.0001). Multiple comparisons revealed that post-MPI in the IFP group, but not in the RPD group, was statistically comparable with HD-MPI, although there were no significant differences among the three groups when MPIs were calculated using peanuts.Conclusions Prosthetic interventions improved mastication predominance in patients with Kennedy Class Ⅱ patients. Depending on the food type, IFP might contribute to better improvement of mastication predominance than RPD depending on food.

Periodontal Behavior and Patient Satisfaction of Anterior Teeth Restored with Single Zirconia Crowns Using a Biologically Oriented Preparation Technique: A 6-Year Prospective Clinical Study

Objectives. The aim of this study was to analyze the behavior of the periodontal tissues around teeth in the anterior region when restored with zirconia single crowns, using a biologically oriented preparation technique (BOPT), over a 6-year follow-up. Methods. The study investigated tooth-supported single crowns in the anterior region that were fabricated with a zirconia core and feldspathic ceramic covering, in 34 patients. Follow-up analysis took place annually for 6 years, assessing periodontal responses by evaluating the following variables: plaque index (PI); probing depth (PD); gingival index (GI); gingival thickness adjacent to the restoration; and stability of the gingival margin (MS). Any (biological and mechanical) complications were also recorded, as well as the patients’ satisfaction with the treatment. Results. After 6 years’ follow-up, a low mean plaque index was obtained, probing depth was stable, and gingival thickness and margin stability had increased. Complications (biological and mechanical) did not present a statistically significant incidence and a crown survival rate of 97.2% was achieved. Patients’ satisfaction obtained a mean VAS score of 9.04 under 10. Conclusion. Teeth that are prepared with BOPT in the anterior region present good periodontal behavior around the restored teeth, particularly in terms of the stability of the gingival margin and increased gingival thickness. Single crowns prepared with BOPT obtain an excellent clinical survival rate, as well as a high score in patients’ satisfaction after 6 years.