A novel jointly colorimetric and fluorescent sensor for Cu2+ recognition and its complex for sensing S2- by a Cu2+ displacement approach in aqueous media

A water-soluble colorimetric chemosensor for sequential probing of Cu2+ and S2- and its practical applications to test strips, reversible test, and water samples

A water-soluble colorimetric chemosensor NHOP ((E)-1-(2-(2-(2-hydroxy-5-nitrobenzylidene)hydrazineyl)-2-oxoethyl)pyridin-1-ium) chloride) was developed for the sequential probing of Cu2+ and S2-. NHOP underwent a color change from pale yellow to colorless in the presence of Cu2+ in pure water. The binding ratio between NHOP and Cu2+ was confirmed to be 1:1 by the Job plot and ESI-MS (electrospray ionization mass spectrometry). The detection limit of NHOP for Cu2+ was calculated as 0.15 μM, which was far below the EPA (Environmental Protection Agency) standard (20 μM). The NHOP-coated test strip was able to easily monitor Cu2+ in real-time. Meanwhile, the NHOP-Cu2+ complex reverted from colorless to pale yellow in the presence of S2- through the demetallation. The stoichiometric ratio between NHOP-Cu2+ and S2- was determined to be 1:1 by analyzing the Job plot and ESI-MS. The detection limit of NHOP-Cu2+ for S2- was calculated as 0.29 μM, which was very below the WHO (World Health Organization) guideline (14.7 μM). NHOP successfully achieved the quantification for Cu2+ and S2- in water samples. NHOP could work as a sequential probe for Cu2+ and S2- at the biological pH range (7.0-8.4). Moreover, NHOP could successively probe Cu2+ and S2- at least three cycles because of its reversible property. The detection mechanisms of NHOP for Cu2+ and NHOP-Cu2+ for S2- were demonstrated with Job plot, ESI-MS, and DFT (density functional theory) calculations. Therefore, NHOP could work as an efficient sequential probe for Cu2+ and S2- in environmental systems.

A portable/miniaturized analytical kit for on-site analysis: Chemical vapor generation-visual colorimetric and smartphone RGB dual-mode for detection of sulfide ion in water and food additives

Chemical vapor generation (CVG) was used as a gaseous sample introduction technique for the visual/smartphone RGB readout colorimetric system, with the advantages of efficient matrix elimination and high vapor generation efficiency, this analytical system exhibits a good selectivity and sensitivity. Sulfide ion (S2-) in solution was transformed to its volatile form (H2S), the generated H2S reacted with a silver-containing metal organic framework (Ag-BTC) selectively, Ag2S was thus generated. Ag-BTC (fabricated on paper sheet) changed from white to dark brown, the color variance was identified by smartphone and naked-eye simultaneously. Under the optimized conditions, a limit of detection of 0.02 μg/mL was obtained by naked-eye. Several water samples and commercial food additives were analyzed for confirming its accuracy and potential application for on-site detection, recoveries ranging 94-110 % were obtained. To meet the demand of on-site analysis of S2-, this colorimetric system was integrated in a portable/miniaturized analytical kit. It is an easy-used, affordable and portable analytical kit for S2- detection in field.

Naphthalimide-based new architecture for fluorescence turn-on sensing of Cu2+ and colorimetric detection of F-/CN. Methods 2024;225:13-19. [PMID: 38438060 DOI: 10.1016/j.ymeth.2024.02.009] [Citation(s) in RCA: 0] [Impact Index Per Article: 0]

A new molecular structure 1 has been developed on naphthalimide motif. The amine and triazole binding groups have been employed at the 4-position of naphthalimide to explore the sensing behavior of molecule 1. Single crystal x-ray diffraction and other spectroscopic techniques confirm the identity of 1. Compound 1 exhibits high selectivity and sensitivity for Cu2+ ions in CH3CN. The binding of Cu2+ shows ∼ 70-fold enhancement in emission at 520 nm. The binding follows 1:1 interaction and the detection limit is determined to be 6.49 × 10-7 M. The amine-triazole binding site in 1 also corroborates the detection of F- through a colour change in CH3CN. Initially H-bonding and then deprotonation of amine -NH- in the presence of F- are the sequential steps involved in F- recognition with a detection limit of 4.13 × 10-7 M. Compound 1 is also sensible to CN- like F- ion and they are distinguished by Fe3+ ion. Cu2+-ensemble of 1 fluorimetrically recognizes F- among the tested anions and vice-versa. The collaborative effect of amine and triazole motifs in the binding of both Cu2+ and F-/CN- has been explained by DFT calculation.

Small Molecule Optical Probes for Detection of H2S in Water Samples: A Review

Hydrogen sulfide (H2S) is closely linked to not only environmental hazards, but also it affects human health due to its toxic nature and the exposure risks associated with several occupational settings. Therefore, detection of this pollutant in water sources has garnered immense importance in the analytical research arena. Several research groups have devoted great efforts to explore the selective as well as sensitive methods to detect H2S concentrations in water. Recent studies describe different strategies for sensing this ubiquitous gas in real-life water samples. Though many of the designed and developed H2S detection approaches based on the use of organic small molecules facilitate qualitative/quantitative detection of the toxic contaminant in water, optical detection has been acknowledged as one of the best, attributed to the simple, highly sensitive, selective, and good repeatability features of the technique. Therefore, this review is an attempt to offer a general perspective of easy-to-use and fast response optical detection techniques for H2S, fluorimetry and colorimetry, over a wide variety of other instrumental platforms. The review affords a concise summary of the various design strategies adopted by various researchers in constructing small organic molecules as H2S sensors and offers insight into their mechanistic pathways. Moreover, it collates the salient aspects of optical detection techniques and highlights the future scope for prospective exploration in this field based on the limitations of the existing H2S probes.

Recent Development on Copper-Sensor and its Biological Applications: A Review

Metal ion recognition is one of the most prospective research topics in the field of chemical sensors due to its wide range of clinical, biological and environmental applications. In this context, hydrazones are well known compounds that exhibit metal sensing and several biological properties due to the presence of N=CH- bond. Some of the biological properties includes anti-cancer, anti-tumor, anti-oxidant, anti-microbial activities. Hydrazones are also used as a ligand to detect metal ion as well as to generate metal complexes that exhibit medicinal properties. Thus, in recent years, many attempts were made to develop novel ligands with enhanced metal sensing and medicinal properties. In this review, some of the recent development on the hydrazones and their copper complexes are covered from the last few years from 2015-2023. These includes significance of copper ions, synthesis, biological properties, mechanism and metal sensing properties of some of the copper complexes were discussed.

Aggregation-induced Emission Active Naphthalimide Derived Schiff Base for Detecting Cu2+ and Its Applications

Herein, an aggregation-induced emission (AIE) active Schiff base (NHS) was synthesized by condensing naphthalimide hydrazide with salicylaldehyde. The non-fluorescent solution of NHS in DMSO turned to emissive NHS upon increasing the HEPES fraction in DMSO from 70 to 95%. The UV-Vis absorption and DLS studies supported the self-aggregation of NHS that restricted the intramolecular rotation and activated the ESIPT process. The blue fluorescence of AIE luminogen NHS in DMSO:HEPES (5:95, v/v, pH = 7.4) was examined by adding different metal ions (Al3+, Ca2+, Cd2+, Co2+, Cu2+, Cr2+, Fe2+, Fe3+, Hg2+, Mg2+, Mn2+, Ni2+, Pb2+ and Zn2+). NHS showed a selective fluorescence switch-off response for Cu2+ due to the chelation enhancement quenching effect (CHEQ). The quenching of NHS by Cu2+ was explored by using density functional theory (DFT) and Stern-Volmer plot. The practical utility of NHS was examined by quantitative and qualitative analysis of Cu2+ in real water samples.

A novel "on-off-on" near-infrared fluorescent probe for Cu2+ and S2- continuous detection based on dicyanoisoflurone derivatives, and its application in bacterial imaging

We have successfully synthesized a near-infrared fluorescent probe for the continuous detection of copper and sulfur ions. The probe has good selectivity and anti-interference ability against Cu2+ and S2-. The results show that after adding Cu2+ to the DL solution of the near-infrared fluorescent probe, Cu2+ forms a [DL + Cu2+] complex with the probe, which leads to fluorescence quenching due to the paramagnetism of Cu2+. The probe can be used for the quantitative detection of Cu2+ with a detection limit of 1.26 × 10-9 M. According to the Job's plot curve the binding stoichiometry between DL and Cu2+ is 1 : 1. Subsequently, S2- was added to the [DL + Cu2+] solution, because the precipitation dissolution equilibrium constant of CuS was Ksp = 1.27 × 10-36, so the binding capacity between Cu2+ and S2- was stronger, CuS precipitation was formed, and red fluorescence was re-released, and the quantitative detection of S2- was realized, and the detection limit was 3.50 × 10-8 M. Through bacterial imaging experiments, we found that the probe can accomplish the fluorescence imaging experiments of Staphylococcus aureus, indicating that the probe has good biopenetration and biocompatibility, and has application prospects in bioimaging and environmental monitoring. In addition, the probe DL has good suitability for Cu2+ and S2- detection in real samples.

Strategies for Improving Selectivity and Sensitivity of Schiff Base Fluorescent Chemosensors for Toxic and Heavy Metals

Toxic cations, including heavy metals, pose significant environmental and health risks, necessitating the development of reliable detection methods. This review investigates the techniques and approaches used to strengthen the sensitivity and selectivity of Schiff base fluorescent chemosensors designed specifically to detect toxic and heavy metal cations. The paper explores a range of strategies, including functional group variations, structural modifications, and the integration of nanomaterials or auxiliary receptors, to amplify the efficiency of these chemosensors. By improving selectivity towards targeted cations and achieving heightened sensitivity and detection limits, consequently, these strategies contribute to the advancement of accurate and efficient detection methods while increasing the range of end-use applications. The findings discussed in this review offer valuable insights into the potential of leveraging Schiff base fluorescent chemosensors for the accurate and reliable detection and monitoring of heavy metal cations in various fields, including environmental monitoring, biomedical research, and industrial safety.

Construction of a novel ESIPT and AIE-based fluorescent sensor for sequentially detecting Cu2+ and H2S in both living cells and zebrafish

The development of effective methods for tracking Cu²⁺ and H₂S in living organisms is urgently required due to their vital function in a variety of pathophysiological processes. In this work, a new fluorescent sensor BDF with excited-state intramolecular proton transfer (ESIPT) and aggregation-induced emission (AIE) features for the successive detection of Cu²⁺ and H₂S was constructed by introducing 3,5-bis(trifluoromethyl)phenylacetonitrile into the benzothiazole skeleton. BDF showed a fast, selective and sensitive fluorescence "turn off" response to Cu²⁺ in physiological media, and the situ-formed complex can serve as a fluorescence "turn on" sensor for highly selective detection of H₂S through the Cu²⁺ displacement approach. In addition, the detection limits of BDF for Cu²⁺ and H₂S were determined to be 0.05 and 1.95 μM, respectively. Encouraged by its favourable features, including strong red fluorescence from the AIE effect, large Stokes shift (285 nm), high anti-interference ability and good function at physiological pH as well as a low toxicity, BDF was successfully applied for the consequent imaging of Cu²⁺ and H₂S in both living cells and zebrafish, making it an ideal candidate for detecting and imaging of Cu²⁺ and H₂S in live systems.

Highly Sensitive and Selective Spiropyran-Based Sensor for Copper(II) Quantification

The metal-binding capabilities of the spiropyran family of molecular switches have been explored for several purposes from sensing to optical circuits. Metal-selective sensing has been of great interest for applications ranging from environmental assays to industrial quality control, but sensitive metal detection for field-based assays has been elusive. In this work, we demonstrate colorimetric copper sensing at low micromolar levels. Dimethylamine-functionalized spiropyran (SP1) was synthesized and its metal-sensing properties were investigated using UV-vis spectrophotometry. The formation of a metal complex between SP1 and Cu²⁺ was associated with a color change that can be observed by the naked eye as low as ≈6 μM and the limit of detection was found to be 0.11 μM via UV-vis spectrometry. Colorimetric data showed linearity of response in a physiologically relevant range (0-20 μM Cu²⁺) with high selectivity for Cu²⁺ ions over biologically and environmentally relevant metals such as Na⁺, K⁺, Mn²⁺, Ca²⁺, Zn²⁺, Co²⁺, Mg²⁺, Ni²⁺, Fe³⁺, Cd²⁺, and Pb²⁺. Since the color change accompanying SP1-Cu²⁺ complex formation could be detected at low micromolar concentrations, SP1 could be viable for field testing of trace Cu²⁺ ions.

A Bis(Salamo)-Based Fluorogenic Sensor for Highly Selective and Sequential Recognition of Cu2+ and B4O72- Ions in Semi-Aqueous Medium

A new type of multifunctional bis(salamo)-based fluorogenic sensor H₂BS was designed and synthesized. Under the action of V_DMF: V_H2O = 9: 1, the fluorogenic sensor can identify Cu²⁺ and B₄O₇^2-, in which N and O atoms can serve as binding sites for Cu²⁺ and B₄O₇^2-, the stoichiometry of the binding of the fluorogenic sensor H₂BS and Cu²⁺ has been confirmed by titration experiment, working curve, ESI-MS analysis and DFT calculation. The pH response experiment also confirmed that the fluorogenic sensor can recognize Cu²⁺ and B₄O₇^2- in the pH range applicable to the physiological environment. The minimum detection limit of H₂BS for Cu²⁺ and B₄O₇^2- recognition reaches 1.12 × 10^-7 and 5.56 × 10^-8 M, and the fluorogenic sensor H₂BS has been successfully applied to Cu²⁺ detection in actual water samples, and the test strip for detecting Cu²⁺ and B₄O₇^2- was obtained. Meanwhile, the success of the test strip experiment made the fluorogenic sensor H₂BS to recognize Cu²⁺ and B₄O₇^2- widely used in daily life. A new type of salamo-based multifunctional fluorogenic sensor H₂BS was designed and synthesized to identify Cu²⁺ and B₄O₇^2- in aqueous solvent systems. Added Cu²⁺ to H₂BS can cause fluorescence quenching. Further experiments showed that H₂BS and Cu²⁺ form a stable 1:2 complex, while B₄O₇^2- can also cause fluorescence quenching of H₂BS, which is the occurrence of the PET effect. Meanwhile, H₂BS can be used for quantitative detection in the environment and rapid identification in life.

A label-free fluorescent peptide probe for sensitive and selective determination of copper and sulfide ions in aqueous systems

A label free fluorescent peptide probe (HDSGWEVHH) was used for Cu2+ and S2- determination in aqueous solution. Our results demonstrated that HDSGWEVHH is highly selective and sensitive for monitoring free Cu2+ concentration via quenching of the probe fluorescence upon Cu2+ binding. The mechanism of the complexation is investigated with Cyclic Voltammetry (CV), 1H nuclear magnetic resonance (NMR), electron paramagnetic resonance (EPR) spectroscopy and computational techniques. Theoretical calculation results indicated the binding ratio of the probe to Cu2+ is 2 : 1 and the binding constant was obtained as 1.72 × 10 8 M-1. Cu2+ concentration can be detected with the detection limit of 16 nM. Free Cu2+ concentration released from the metallothionein-Cu complex at different pH values was detected. Cu2+ concentration in real water and tea samples was also detected, and the results were consistent with the ones monitored by atomic absorption spectrometer. Because of the exceedingly small K sp value of CuS (1.27 × 10-36), S2- can sequester Cu2+ from HDSGWEVHH to restore the tryptophan (W) fluorescence. Thus the HDSGWEVHH-Cu2+ complex can also be used for S2- detection. The S2- concentrations can be monitored with a detection limit of 19 nM. The assay is also amenable to measurement of S2- concentration in pure water samples. Thus the probe designed herein is sensitive, label free, low cost, and environmentally friendly for Cu2+ and S2- determination in aqueous solutions.

Asparagine modified downconversion NaGdF4:Dy3+/Tb3+ nanophosphor for selective and sensitive detection of Cu(ii) ion

Pure NaGdF4, NaGdF4:Dy3+, and Dy3+/Tb3+ co-doped NaGdF4 nanoparticles with different concentrations of Tb3+ (ranging from 3 to 20 mol%) were prepared via hydrothermal method.

A naked-eye colorimetric sensor based on chalcone for the sequential recognition of copper(ii) and sulfide ions in semi-aqueous solution: spectroscopic and theoretical approaches

A chalcone-based new colorimetric sensor A01 for the sequential detection of Cu²⁺ and S²⁻ ions.

A highly sensitive and selective bis(salamo)-type fluorescent chemosensor for identification of Cu2+ and the continuous recognition of S2-, Arginine and Lysine

A novel bis(salamo)-type chemosensor H₃L was synthesized and characterized. It was found that the sensor molecule can selectively recognize Cu²⁺, and its L-Cu²⁺ is highly sensitive to the detection of S^2- anion, Arginine and Lysine when dissolved in ethanol solvent. The sensor H₃L can be used to identify a relay sensor for Cu²⁺, while the L-Cu²⁺ recognizes S^2- anion, Arginine and Lysine with high selectivity and sensitivity over an acceptable physiological pH range. The detection line of the sensor molecule H₃L is 1.02 × 10^-6 M, and its binding constant to Cu²⁺ is 1.54 × 10⁶ M^-1. The detection line of L-Cu²⁺ as a sensor is calculated as 5.57 × 10^-7 M, and its binding constants with S^2- anion, Arginine and Lysine are 2.80 × 10⁵ M^-1, 5.32 × 10⁶ M^-1 and 5.94 × 10⁶ M^-1, respectively. The crystal structure of the Cu(II) complex [Cu₄(L)₂(CH₃OH)₂]·2NO₃ with the sensor molecule H₃L has been determined by single crystal X-ray crystallography.

Facile and Green Fabrication of Carrageenan-Silver Nanoparticles for Colorimetric Determination of Cu2+ and S2

In the present work, silver nanoparticles (AgNPs) were prepared by a simple and green method using carrageenan as reducing and capping agent. The as-synthesized carrageenan-AgNPs was demonstrated as an effective duel colorimetric sensing for selective and sensitive recognition of Cu²⁺ and S²⁻, which could be used to detect these ions with naked eyes. In addition, the possible sensing mechanism was that Cu²⁺ ions caused serious aggregation of carrageenan-AgNPs, which led to the color change of carrageenan-AgNPs. AgNPs were etched by S²⁻ forming Ag₂S, which played an important role in the determination of S²⁻ ions. Furthermore, it has been successfully applied to the determination of Cu²⁺ and S²⁻ in tap water and lake water, showing its great potential for the analysis of environmental water samples.

CuO@Cu/Ag/MWNTs/sponge electrode-enhanced pollutant removal in dielectric barrier discharge (DBD) reactor

In this study, a sponge modified by multi-walled carbon nanotubes (MWNTs) was used as sheet support for the adsorption of CuO@Cu and Ag nanowires to prepare a CuO@Cu/Ag/MWNTs/sponge electrode. Similar to their use in a dielectric barrier discharge (DBD) reactor, the MWNTs changed the conductivity and water absorptivity of the modified electrode, whereas the CuO@Cu and Ag nanowires significantly enhanced the tip effect to increase discharge. The optimal ratio of the Ag:CuO@Cu nanowires was 5:3 at a total adsorbed concentration of 0.8 g L^-1. Compared with CuO@Cu and Ag nanowires were separately adsorbed on the MWNTs/sponge, and the CuO@Cu/Ag/MWNTs/sponges recorded higher current response, lower discharge inception voltage, and higher removal efficiency of phenol and 2,4,5-trichlorobiphenyl (PCB29) through their degradation. The removal efficiency reached 100% within 30 min of the reaction for the degradation of phenol and 65.1% within 60 min of the reaction for the degradation of PCB29 at an input voltage of 30 V. These results show that the CuO@Cu/Ag/MWNTs/sponge structure has significant potential for use in the DBD reactor to improve the discharge efficiency of the system and reduce energy consumption, and can be further extended to other types of plasma reactors.

Highly Sensitive Dansyl-Based Chemosensor for Detection of Cu2+ in Aqueous Solution and Zebrafish

A new dansyl-based chemosensor (2-(4-((5-(dimethylamino)naphthalen-1-yl)sulfonyl)piperazin-1-yl)-N-(quinolin-8-yl)acetamide) (DC) for detecting Cu2+ was synthesized and characterized. DC showed great selectivity to Cu2+ by a fluorescent "on-off" detection method. Job plot, ESI-mass spectroscopy, and 1H NMR titration suggested a 1 to 1 binding mode between DC and Cu2+. The detection limit was determined to be 43 nM, which is greatly below the WHO guidelines. In addition, DC can be applied to real samples and zebrafish imaging. The fluorescence quenching mechanism was proposed as the enhancement of intramolecular charge transfer with calculations.

An On-Off-On Fluorescence Probe Based on Coumarin for Cu2+, Cysteine, and Histidine Detections

A simple coumarin-based Schiff base (probe L) was successfully developed. It showed strong green fluorescence emission at 527 nm with a 70.3% of fluorescence quantum efficiency (Φ_F). However, after the addition of common metal ions, probe L can only combine with Cu²⁺ ions and displayed significant fluorescence quenching of > 96.2% (Φ_F = 2.7%) due to the paramagnetic quenching action from Cu²⁺. Conversely, by the coordination action of cysteine (Cys) and histidine (His), the quenching fluorescence of the complex (L-Cu²⁺) between probe L and Cu²⁺ ions was recovered mostly because the Cys and His can usurp Cu²⁺ of L-Cu²⁺ and led to the liberation of probe L. Based on the fluorescence changes of probe L with the actions of Cu²⁺, Cys, and His, an on-off-on reversible fluorescence probe for sensitive and specific monitoring Cu²⁺, Cys, and His has been prepared. More importantly, the probe L and L-Cu²⁺ ensemble can be used, respectively, to test Cu²⁺ and Cys/His in live cells and human urine samples with great reliability.

A highly sensitive fluorescent probe with different responses to Cu2+ and Zn2

We report a highly sensitive fluorescent probe based on p-dimethylaminobenzoyl derivatives (probe L) for the detection of Cu²⁺ and Zn²⁺. In this work, the probe L exhibited a fluorescent turn-on sensing model to Cu²⁺ and Zn²⁺ with a distinct fluorescent color change from colorless to green and yellow respectively. Probe L exhibited high selectivity as a fluorescent Cu²⁺/Zn²⁺ probe with a limit of detection (LOD) of 45 nM/17 nM. The results of ¹H NMR titrations revealed that the response of L to Cu²⁺ and Zn²⁺ was triggered by the interaction of the thiophene unit and the metal ion. Furthermore, the fluorescence titrations and Job's plot curves displayed the binding ratio of 1:2 for Cu²⁺ and 1:1 for Zn²⁺ metal-L complex formation respectively. Density functional theory calculation also demonstrated the possibility of molecular luminescence and the process of metal-L complex formation. Additionally, fluorescent test strips have been prepared for convenient detection of Cu²⁺ and Zn²⁺, which means the convenient and rapid assay in real samples can be achieved.

A turn-on fluorescent probe with a dansyl fluorophore for hydrogen sulfide sensing

Hydrogen sulfide (H₂S) is a biologically relevant molecule that has been newly identified as a gasotransmitter and is also a toxic gaseous pollutant. In this study, we report on a metal complex fluorescent probe to achieve the sensitive detection of H₂S in a fluorescent “turn-on” mode. The probe bears a dansyl fluorophore with multidentate ligands for coordination with copper ions. The fluorescent “turn-on” mode is facilitated by the strong bonding between H₂S and the Cu(ii) ions to form insoluble copper sulfide, which leads to the release of a strongly fluorescent product. The H₂S limit of detection (LOD) for the proposed probe is estimated to be 11 nM in the aqueous solution, and the utilization of the probe is demonstrated for detecting H₂S in actual lake and mineral water samples with good reproducibility. Furthermore, we designed detector vials and presented their successful application for the visual detection of gaseous H₂S.

H₂S turn on the fluorescence of DNS–Cu complex probe.