The applicability of reflectance micro-Fourier-transform infrared spectroscopy for the detection of synthetic microplastics in marine sediments

Microplastics monitoring in freshwater systems: A review of global efforts, knowledge gaps, and research priorities

The escalating production of synthetic plastics and inadequate waste management have led to pervasive microplastic (MP) contamination in aquatic ecosystems. MPs, typically defined as particles smaller than 5 mm, have become an emerging pollutant in freshwater environments. While significant concern about MPs has risen since 2014, research has predominantly concentrated on marine settings, there is an urgent need for a more in-depth critical review to systematically summarize the current global efforts, knowledge gaps, and research priorities for MP monitoring in freshwater systems. This review evaluates the current understanding of MP monitoring in freshwater environments by examining the distribution, characteristics, and sources of MPs, alongside the progression of analytical methods with quantitative evidence. Our findings suggest that MPs are widely distributed in global freshwater systems, with higher abundances found in areas with intense human economic activities, such as the United States, Europe, and China. MP abundance distributions vary across different water bodies (e.g., rivers, lakes, estuaries, and wetlands), with sampling methods and size range selections significantly influencing reported MP abundances. Despite great global efforts, there is still a lack of harmonized analyzing framework and understanding of MP pollution in specific regions and facilities. Future research should prioritize the development of standardized analysis protocols and open-source MP datasets to facilitate data comparison. Additionally, exploring the potential of state-of-the-art artificial intelligence for rapid, accurate, and large-scale modeling and characterization of MPs is crucial to inform effective strategies for managing MP pollution in freshwater ecosystems.

Neonatal Exposure to Polystyrene Nanoplastics Impairs Microglia-Mediated Synaptic Pruning and Causes Social Behavioral Defects in Adulthood

The increasing prevalence and persistence of nanoplastics (NPs) have become critical environmental concerns. These particles have the potential to enter the food chain and accumulate in living organisms, which exerts their adverse effects on human health. The release of nanoparticles from feeding bottles raises concerns about potential health issues, especially for newborns exposed to NPs at the neonatal stage. In this study, we examined the impacts of neonatal exposure to polystyrene nanoplastics (PS-NPs) on neurodevelopment. Our study demonstrates that exposure to PS-NPs in newborn mice impairs microglial autophagic function and energy metabolism, leading to the disruption of microglia-mediated synaptic pruning during early neurodevelopment. These mice subsequently develop social behavioral defects in adulthood, suggesting the long-lasting effects of neonatal PS-NP exposure on brain development and behavior. Together, these data provide insights into the mechanism by which PS-NPs affect early neurodevelopment, thus emphasizing the crucial need to address plastic pollution globally.

Optimization and application of pretreatment method of microplastics detection in municipal solid waste landfills

The landfill is one of the most important sources of microplastics (MPs). The pretreatment method is a precondition of microplastics study for the presence of complex substances in landfills. Therefore, it is essential to examine the impact of different pretreatment methods on the microplastics detection. A literature review and a comparison experiment on digestion solutions were performed to establish a comprehensive identification method for MPs in landfills. When exposed to of 30 % H2O2, minimal mass reduction of PE, PP and PET were 4.00 %, 3.00 % and 3.00 % respectively, and the least surface damage was observed in MPs, while exhibiting the most optimal peak value for infrared spectral characteristics. It is demonstrated that the effect of 30 % H2O2 dissolution was superior compared to 10 % KOH and 65 % HNO3. The method was subsequently utilized to investigate the distribution of MPs in a landfill. The dominant MPs were polyethylene (PE, 18.56-23.91 %), polyethylene terephthalate (PET, 8.80-18.66 %), polystyrene (PS, 10.31-18.09 %), and polypropylene (PP, 11.60-14.91 %). The comprehensive identification method of "NaCl density separation + 30 % H2O2 digestion + NaI density separation + sampling microscope + Mirco-FTIR" is suitable for the detection of MPs in landfills.

Understanding microplastic pollution of marine ecosystem: a review

Microplastics are emerging as prominent pollutants across the globe. Oceans are becoming major sinks for these pollutants, and their presence is widespread in coastal regions, oceanic surface waters, water column, and sediments. Studies have revealed that microplastics cause serious threats to the marine ecosystem as well as human beings. In the past few years, many research efforts have focused on studying different aspects relating to microplastic pollution of the oceans. This review summarizes sources, migration routes, and ill effects of marine microplastic pollution along with various conventional as well as advanced methods for microplastics analysis and control. However, various knowledge gaps in detection and analysis require attention in order to understand the sources and transport of microplastics, which is critical to deploying mitigation strategies at appropriate locations. Advanced removal methods and an integrated approach are necessary, including government policies and stringent regulations to control the release of plastics.

Neurotoxic effects of polystyrene nanoplastics on memory and microglial activation: Insights from in vivo and in vitro studies

Nanoplastics, arising from the fragmentation of plastics into environmental pollutants and specialized commercial applications, such as cosmetics, have elicited concerns due to their potential toxicity. Evidence suggests that the oral ingestion of nanoplastics smaller than 100 nm may penetrate the brain and induce neurotoxicity. However, comprehensive research in this area has been hampered by technical challenges associated with the detection and synthesis of nanoplastics. This study aimed to bridge this research gap by successfully synthesizing fluorescent polystyrene nanoplastics (PSNPs, 30-50 nm) through the incorporation of IR-813 and validating them using various analytical techniques. We administered PSNPs orally (10 and 20 mg/kg/day) to mice and observed that they reached brain tissues and induced cognitive dysfunction, as measured by spatial and fear memory tests, while locomotor and social behaviors remained unaffected. In vitro studies (200 μg/mL) demonstrated a predominant uptake of PSNPs by microglia over astrocytes or neurons, leading to microglial activation, as evidenced by immunostaining of cellular markers and morphological analysis. Transcriptomic analysis indicated that PSNPs altered gene expression in microglia, highlighting neuroinflammatory responses that may contribute to cognitive deficits. To further explore the neurotoxic effects of PSNPs mediated by microglial activation, we measured endogenous neuronal activity using a multi-electrode array in cultured hippocampal neurons. The application of conditioned media from microglia exposed to PSNPs suppressed neuronal activity, which was reversed by inhibitors of microglial activation. Our findings offer detailed insights into the mechanisms by which nanoplastics damage the brain, particularly emphasizing the potential environmental risk factors that contribute to cognitive impairment in neurodegenerative diseases.

Evaluation of microplastics release from solar water disinfection poly(ethylene terephthalate) and polypropylene containers

Public health concern associated with the ingestion of microplastics (MPs) released from water packaging materials is increasing. The use of plastic materials for solar disinfection (SODIS) containers has also raised concerns in the SODIS community due to the lack of studies evaluating the presence of MPs in the treated water. In this work, the migration of MPs from poly(ethylene terephthalate, PET) bottles and polypropylene (PP) translucent and transparent jerrycan containers (TJC) into water under natural weathering was investigated using micro-reflectance Fourier Transform Infrared Spectroscopy (µ-FTIR). Containers exposed to sunlight for three months became photodegraded, releasing micro-sized fragments identified as PET, PP and high-density polyethylene (HDPE, from the screw-caps), although with varying degrees of weathering. It is noteworthy that the presence of a clarifying additive in PP formulation did not seem to impact the release of MPs from the containers. The study showed that PP TJC containers released more MPs than PET bottles. Finally, the size of MPs was measured to determine their fate upon ingestion and highlights the need for further studies to understand the safety of these plastic containers for SODIS.

Identification and physico-chemical characterization of microplastics in marine aerosols over the northeast Arabian Sea

Microplastics (MPs) in the atmosphere can undergo long-range transport from emission regions to pristine terrestrial and oceanic ecosystems. Due to their inherent toxic and hazardous characteristics, MPs pose serious risks to both human well-being and the equilibrium of ecosystem. The present study outlines the comprehensive characterization, spanning physical and chemical attributes of MPs associated with atmospheric aerosols. Total suspended particulates (TSPs) were collected on a quartz fibre filter by operating a high-volume sampler for 24 h during distinct years (March, 2016 and November, 2020) at a coastal location in the northeast Arabian Sea. Subsequent to the sampling, a series of techniques were applied including density separation. The assessment and scrutiny of the MPs was carried out using stereo-zoom microscopy with supplementary validation using advanced fluorescence microscopy for enhanced precision in identification. Our comparative assessment suggests peroxide treatment followed by density separation could be a robust procedure for the definitive identification and characterization of MPs in the atmosphere. Average total abundance of MPs was found to be 1.30 ± 0.14 n/m3 in 2016 and 1.46 ± 0.12 n/m3 in 2020 with fibres, fragments and films having similar relative contributions (41 %, 31 %, 28 % in 2016 and 40 %, 35 %, 25 % in 2020). Fibres were found to be dominant morphotype followed by fragments and films over the coastal region of the Arabian Sea. In order to unravel the detailed chemical nature of these MPs, spectral analysis using μ-FTIR was carried out. The outcome of the analysis showed prevailing polymers as polyvinyl chloride and polymethyl methacrylate (50545 %) as dominant polymers followed by polyester (15 %), styrene butyl methacrylate (11 %), and polyacetal (9 %). MPs present in the vicinity of the Arabian Sea have potential to supply nutrients and toxicants, consequently can contribute to the modulation of the surface water biogeochemical processes.

Underappreciated microplastic galaxy biases the filter-based quantification

Long-term environmental loading of microplastics (MPs) causes alarming exposure risks for a variety of species worldwide, considered a planetary threat to the well-being of ecosystems. Robust quantitative estimates of MP extents and featured diversity are the basis for comprehending their environmental implications precisely, and of these methods, membrane-based characterizations predominate with respect to MP inspections. However, though crucial to filter-based MP quantification, aggregation statuses of retained MPs on these substrates remain poorly understood, leaving us a "blind box" that exaggerates uncertainty in quantitive strategies of preselected areas without knowing overview loading structure. To clarify this uncertainty and estimate their impacts on MP counting, using MP imaging data assembled from peer-reviewed studies through a systematic review, here we analyze the particle-specific profiles of MPs retained on various substrates according to their centre of mass with a fast-random forests algorithm. We visualize the formation of distinct galaxy-like MP aggregation-similar to the solar system and Milky Way System comprised of countless stars-across the pristine and environmental samples by leveraging two spatial parameters developed in this study. This unique pattern greatly challenges the homogeneously or randomly distributed MP presumption adopted extensively for simplified membrane-based quantification purposes and selective ROI (region of interest) estimates for smaller-sized plastics down to the nano-range, as well as the compatibility theory using pristine MPs as the standard to quantify the presence of environmental MPs. Furthermore, our evaluation with exemplified numeration cases confirms these location-specific and area-dependent biases in many imaging analyses of a selective filter area, ascribed to the minimum possibility of reaching an ideal turnover point for the selective quantitive strategies. Consequently, disproportionate MP schemes on loading substrates yield great uncertainty in their quantification processing, highlighting the prompt need to include pattern-resolved calibration prior to quantification. Our findings substantially advance our understanding of the structure, behavior, and formation of these MP aggregating statuses on filtering substrates, addressing a fundamental question puzzling scientists as to why reproducible MP quantification is barely achievable even for subsamples. This study inspires the following studies to reconsider the impacts of aggregating patterns on the effective counting protocols and target-specific removal of retained MP aggregates through membrane separation techniques.

Microplastic Distribution Characteristics and Sources on Beaches That Serve as the Largest Nesting Ground for Green Turtles in China

The threat of microplastics to marine animals and habitats is increasing, which may affect sea turtle nesting grounds. The Qilianyu Islands are the largest remaining green turtle (Chelonia mydas) nesting grounds in China. Despite being far from the mainland, microplastic pollution cannot be ignored. In this study, the level of microplastic pollution in surface sediments from three different zones, namely, the bottom, intertidal, and supratidal zone, was investigated on North Island, Qilianyu Islands. The results showed that the abundance of microplastics in the supratidal zone was significantly higher than that in the bottom zone and intertidal zone (r = 3.65, p = 0.011), with the highest average abundance of microplastics located on the southwest coast of North Island. In the bottom zone, only plastic blocks (88%) and fibers (12%) were found. The main types of microplastics in the intertidal and supratidal zones were plastic blocks (48%) and foam (42%), with polyethylene (PE) (40%) and polystyrene (PS) (34%) being the predominant components. These types and components of microplastics differed from those in the surrounding seawater, but corresponding types and components were found in the plastic debris on the beach. Meanwhile, it was also observed that there were multiple instances of fragmented plastic on the beach. Thus, we suggest that the microplastics on the beach in North Island were mainly derived from the fragmentation of microplastic debris, indicating secondary microplastics. It is recommended to further strengthen the regular cleaning of plastic debris on the beach, especially the removal of small plastic debris, in order to reduce the pollution from secondary microplastics generated by the fragmentation of beach plastic debris and to better protect China's most important sea turtle nesting site in the South China Sea.

Detecting small microplastics down to 1.3 μm using large area ATR-FTIR

Large area attenuated total reflectance-Fourier transform infrared spectroscopy (LAATR-FTIR) is introduced as a novel technique for detecting small microplastics (MPs) down to 1.3 μm. Two different LAATR units, one with a zinc selenide (ZnSe) and one with a germanium (Ge) crystal, were used to detect reference MPs < 20 μm, and MPs in marine water samples, and compared with μ-FTIR in transmission mode. The LAATR units performed well in identifying small MPs down to 1.3 μm. However, they were poorly suited for large MPs as uneven particle thickness resulted in uneven contact between crystal and particle, misinterpreting large MPs as many small MPs. However, for more homogeneous matrices, the technique was promising. Further assessment indicated that there was little difference in spectra quality between transmission mode and LAATR mode. All in all, while LAATR units struggle to substitute transmission mode, it provides additional information and valuable information on small MPs.

It matters how we measure - Quantification of microplastics in drinking water by μFTIR and μRaman

The water treatment for microplastics (MP) at a Danish groundwater-based waterworks was assessed by Fourier-Transform IR micro-spectroscopy (μFTIR) (nominal size limit 6.6 μm) and compared to results from Raman micro-spectroscopy (μRaman) (nominal size limit 1.0 μm) on the same sample set. The MP abundance at the waterworks' inlet and outlet was quantified as MP counts per cubic metre (N/m3) and estimated MP mass per cubic metre (μg/m3). The waterworks' MP removal efficiency was found to be higher when analysing by μFTIR (counts: 78.14 ± 49.70%, mass: 98.73 ± 11.10%) and less fluctuating than when using μRaman (counts: 43.2%, mass: 75.1%). However, both techniques pointed to a value of ∼80% for the counts' removal efficiency of MPs >6.6 μm. Contrarily to what was shown by μRaman, no systematic leaking of MPs from the plastic elements of the facility could be identified for the μFTIR dataset, either from the counts (inlet 31.86 ± 17.17 N/m3, outlet 4.98 ± 2.09 N/m3) or mass estimate (inlet 76.30 ± 106.30 μg/m3, outlet 2.81 ± 2.78 μg/m3). The estimation of human MP intake from drinking water calculated from the μFTIR data (5 N/(year·capita)) proved to be approximately 332 times lower than that calculated from the μRaman dataset, although in line with previous studies employing μFTIR. By merging the MP length datasets from the two techniques, it could be shown that false negatives became prevalent in the μFTIR dataset already below 50 μm. Further, by fitting the overall frequency of the MP length ranges with a power function, it could be shown that μFTIR missed approximately 95.7% of the extrapolated MP population (1-1865.9 μm). Consequently, relying on only μFTIR may have led to underestimating the MP content of the investigated drinking water, as most of the 1-50 μm MP would have been missed.

Unveiling the noxious effect of polystyrene microplastics in aquatic ecosystems and their toxicological behavior on fishes and microalgae

Microplastic (MP) particles are considered noxious pollutants due to their presence in aquatic habitats at almost every level of the food chain. Thus, the entry of MP particles into marine waterbodies has triggered a common research interest. Until recently, the toxicity of polystyrene towards aquatic creatures in comparison to other polymers has not been widely investigated. This article provides an extensive overview of the occurrence of microplastic particles, the route of polystyrene (PS) in the aquatic ecosystem, the PS properties characterization, and its noxious effects on the aquatic biota, particularly fishes and microalgae. Alarming high levels of polystyrene were found in urban, coastal, and rural surface waters and sediments. The fast-screening technique began with a stereoscope to determine the polystyrene particles' shape, size, and color on the organism. SEM and complemented by micro FTIR or Raman spectroscopy were used to evaluate MP's polymer structures. The findings present evidence suggesting that polystyrene buildup in fish can have long-term and unknown consequences. Meanwhile, the presence of polystyrene on microalgae causes a decrease in chlorophyll concentration and photosynthetic activity, which may disrupt photosynthesis by interfering with the electron characters and leading to the production of reactive oxygen species (ROS).

Insights into adsorption mechanisms of nitro polycyclic aromatic hydrocarbons on common microplastic particles: Experimental studies and modeling

Nitro polycyclic aromatic hydrocarbons (NPAHs) and microplastics (MPs) are emerging contaminants that pose a threat to the aquatic ecosystem. Knowledge of the NPAHs and MPs interaction will help the understanding of their fate and risks in natural environment. Here, the adsorption behavior and mechanism of typical NPAHs on microplastics were investigated. The adsorption kinetic and isotherm data showed that the adsorption of NPAHs was controlled by chemical adsorption and hydrophobic partition, because of excellent fit of kinetic and isothermal equations (R² > 0.9). The adsorption capacity (587-744 μg g^-1) was largely dependent on the hydrophobicity of NPAHs. The experiment of environmental factors confirmed the important role of pollutant hydrophobicity, with 1-Npyr of the highest hydrophobicity having the greatest adsorption on MPs (adsorption rate >90%) and less affected by solution pH and ionic strength (changer <5%). In the mixture system, MPs displayed high adsorption capacity for each compound; Interestingly, because compounds with smaller size were easy to occupy the adsorption sites in the pores of MPs, the adsorption of 2-Nflu (724 μg g^-1) was even greater than that of 9-Nant (713 μg g^-1) and 1-Npyr (703 μg g^-1). The model calculation of adsorption also shows that there is surface adsorption and hydrophobic distribution in the adsorption process. The findings provide new insights into the interactions of MPs with organic pollutants in complex environments.

Detection of Sub-20 μm Microplastic Particles by Attenuated Total Reflection Fourier Transform Infrared Spectroscopy and Comparison with Raman Spectroscopy

Microplastics are particulate water contaminants that are raising concerns regarding their environmental and health impacts. Optical spectroscopy is the gold standard for their detection; however, it has severe limitations such as tens of hours of analysis time and spatial resolution of more than 10 μm, when targeting the production of a 2D map of the microparticle population. In this work, through a single spectrum acquisition, we aim at quickly getting information about the whole population of identical particles, their chemical nature, and their size in a range below 20 μm. To this end, we built a compact setup enabling both attenuated total reflection Fourier transform infrared (ATR-FTIR) and Raman spectroscopy measurement on the same sample for comparison purposes. We used monodisperse polystyrene and poly(methyl methacrylate) microplastic spheres of sizes ranging between 6 and 20 μm, also measured collectively using a bench-top FTIR spectrometer in ATR mode. The ATR-FTIR technique appears to be more sensitive for the smallest particles of 6 μm, while the opposite trend is observed using Raman spectroscopy. We use theoretical modeling to simulate and explain the ripples observed in the measured spectra at the shortest wavelength (higher wavenumber) region, which appears as an indicator of the microparticle dimension. The latter finding opens new perspectives for ATR-FTIR for the identification and classification of populations of nearly identical micro-scale bodies, such as bacteria and other micro-organisms, where the same measured spectrum embeds dual information about the chemical nature and the size.

Research status and prospects of microplastic pollution in lakes

As an emerging pollutant, microplastics have attracted widespread concern around the world. Research on microplastics was first conducted in oceans, and in recent years, inland water, especially lakes, has gradually become a hot spot. This paper systematically reviews the sampling, separation, purification, and identification technologies used to assess microplastics in lakes and summarizes the occurrence of lake microplastics worldwide. The results show that microplastics are widespread in lake water and sediment. There are obvious geographical differences in the occurrence of microplastics. The abundance of microplastics in different lakes varies greatly. The forms are mostly fibrous and fragments, and the main polymers are polypropylene (PP) and polyethylene (PE). Previous papers have failed to comment in as much detail on the microplastic sampling techniques employed within lake systems. The sampling and analysis methods are critical to accurately evaluating contamination results. Due to the widespread presence of microplastics and the lack of uniform standards, there are various sampling methods. Trawls and grabs are most widely used in the sampling of lake water bodies and sediment, and sodium chloride and hydrogen peroxide are the most widely used media for flotation and digestion, respectively. In the future, it will be critical to establish unified standards for lake microplastic sampling and analysis technology, further explore the migration mechanism of microplastics in lake systems, and pay attention to the impact of microplastics on lake ecosystems.

Microplastics toxicity, detection, and removal from water/wastewater

The world has witnessed massive and preeminent microplastics (MPs) pollution in water bodies due to the inevitable continuous production of plastics for various advantageous chemical and mechanical features. Plastic pollution, particularly contamination by MPs (plastic particles having a diameter lesser than 5 mm), has been a rising environmental concern in recent years due to the inappropriate disposal of plastic trash. This study presents the recent advancements in different technologies for MPs removal in order to gain proper insight into their strengths and weaknesses, thereby orchestrating the preparation for innovation in the field. The production, origin, and global complexity of MPs were discussed. This study also reveals MPs' mode of transportation, its feedstock polymers, toxicities, detection techniques, and the conventional removal strategies of MPs from contaminated systems. Modification of conventional methods vis-à-vis new materials/techniques and other emerging technologies, such as magnetic extraction and sol-gel technique with detailed mechanistic information for the removal of MPs are presented in this study. Conclusively, some future research outlooks for advancing the MPs removal technologies/materials for practical realization are highlighted.

Microplastic in the Baltic Sea: A review of distribution processes, sources, analysis methods and regulatory policies

Microplastics pollution is an issue of great concern for scientists, governmental bodies, ecological organisations, and the general public. Microplastics pollution is widespread and is a great environmental problem on account of its potential toxicity for marine biota and human health. Today, almost all the world's seas and oceans are polluted with microplastics. The Baltic Sea is a semi-enclosed reservoir of brackish water and is a hotspot for contamination in terms of eutrophication and the presence of organic matter. Microplastics are quite intense, based on data from studies of marine litter and microplastics in the Baltic Sea. The number of microplastics in the Baltic Sea water is 0.07-3300 particles/m³, and in sediments 0-10179 particles/kg. These amounts prove that the waters and sediments of the Baltic Sea are heavily contaminated with microplastics. This article provides a comprehensive review of the microplastic origins and transport routes to the Baltic Sea. The data is presented as the concentration of microplastics in surface waters, sediments, and sea sand. The extraction methods used and the microplastics techniques are also presented. The possibilities and limitations of water and sediment sampling methods for microplastics determination were summarised, taking into account sampling tools, volume and depth. Extraction, separation, filtration, and visual sorting are outlined as sample preparation techniques for microplastic analysis. This review also focuses on the problems of obtaining data relevant to the development of the mathematical models necessary to monitor trends in the spread of microplastics in the Baltic Sea. Finally, several important laws and policies, which are in place in the Baltic States to control and manage microplastic pollution in the region, are highlighted.

Micro- and nanoplastic contamination in livestock production: Entry pathways, potential effects and analytical challenges

The abundant and widespread presence of particulate plastics in the environment is considered an area of increasing environmental, animal and human health concern. Despite the abundance and the potential to cause deleterious biological effects, studies related to the impact of micro and nanoplastics (MNPs) on livestock animals are limited. This review evaluates the sources and entry pathways of particulate plastics in all the types of livestock production systems. The potential health effects of MNPs on mouse models, ruminant animals and a few other livestock animals are discussed. Since evaluation of MNPs in almost all types of matrices in hindered by analytical challenges, this review also evaluates the commonly used methods, emerging techniques, and quality control/quality assurance (QC/QA) procedures. Plastic mulching, fragmentation of plastic wastes and stream water runoff have been identified as major routes of MNPs entry in grazing-based and mixed livestock production systems. Notwithstanding the controlled indoor environment and relatively efficient waste management, MNPs have been detected in industrial livestock systems. The bioaccumulation and biomagnification of chemical toxicants can exacerbate the adverse effects of MNPs on higher trophic level species. Although there are several methods for the analysis of MNPs, dearth of standardized methods, certified reference materials, MPs standards, and global database libraries are major impediments. The adverse effects of MNPs on the internal organs of different livestock animals have to be studied using large sample sizes and without raising ethical concerns. Importantly, investigations on the accurate quantification of MNPs and its adverse effects in various livestock animals using rapid, cost-effective and robust analytical methods are required.

Microplastics in landfill and leachate: Occurrence, environmental behavior and removal strategies

Plastic wastes buried in landfill are gradually broken and decomposed into microplastics under physical, chemical and biological effects, bringing environmental risks to the exploitation of waste resources. Landfill leachate as a potential source of environmental microplastics has not good attention. Microplastics in leachate carry toxic and harmful pollutants and antibiotic resistance genes, and these vectors pose greater risks to human and environmental health without systematic treatment. Recently, the main technologies of landfill leachate treatment process include order batch activated sludge process, membrane biological reaction process, flocculation process, combined filtration process, and constructed wetland process. However, there is still little knowledge about microplastic removal of the existing leachate treatment facilities, and some technologies to alleviate the sources of such microplastics should be timely developed. This paper systematically summarizes the occurrence of plastics, microplastics and nanoplastics in leachate and their interactive pollution with other toxic pollutants. Meanwhile, the prospects of their environmental behaviors in landfill and leachate are put forward. The microplastic removal by existing leachate treatment equipment and the limitations and challenges to upgrading process of development and implementation are also discussed. The paper can provide a scientific basis for studying the fate of microplastics in landfill and leachate.

Current development and future challenges in microplastic detection techniques: A bibliometrics-based analysis and review

Microplastics have been considered a new type of pollutant in the marine environment and have attracted widespread attention worldwide in recent years. Plastic particles with particle size less than 5 mm are usually defined as microplastics. Because of their similar size to plankton, marine organisms easily ingest microplastics and can threaten higher organisms and even human health through the food chain. Most of the current studies have focused on the investigation of the abundance of microplastics in the environment. However, due to the limitations of analytical methods and instruments, the number of microplastics in the environment can easily lead to overestimation or underestimation. Microplastics in each environment have different detection techniques. To investigate the current status, hot spots, and research trends of microplastics detection techniques, this review analyzed the papers related to microplastics detection using bibliometric software CiteSpace and COOC. A total of 696 articles were analyzed, spanning 2012 to 2021. The contributions and cooperation of different countries and institutions in this field have been analyzed in detail. This topic has formed two main important networks of cooperation. International cooperation has been a common pattern in this topic. The various analytical methods of this topic were discussed through keyword and clustering analysis. Among them, fluorescent, FTIR and micro-Raman spectroscopy are commonly used optical techniques for the detection of microplastics. The identification of microplastics can also be achieved by the combination of other techniques such as mass spectrometry/thermal cracking gas chromatography. However, these techniques still have limitations and cannot be applied to all environmental samples. We provide a detailed analysis of the detection of microplastics in different environmental samples and list the challenges that need to be addressed in the future.

First assessment of microplastic and artificial microfiber contamination in surface waters of the Amazon Continental Shelf

The composition and distribution of microplastics (MPs) in the Brazilian Amazon Continental Shelf surface waters are described for the first time. The study was conducted during the 2018 rainy and dry seasons, using 57 water samples collected with aluminum buckets and filtered through a 64-μm mesh. The samples were vacuum-filtered in a still-air box, and the content of each filter was measured, counted, and classified. A total of 12,288 floating MPs were retrieved; particles were present at all 57 sampling points. The mean MP abundance was 3593 ± 2264 items·m^-3, with significantly higher values during the rainy season (1500 to 12,967; 4772 ± 2761 items·m^-3) than in the dry season (323 to 5733; 2672 ± 1167 items·m^-3). Polyamides (PA), polyurethane (PU), and acrylonitrile butadiene styrene (ABS) were the most common polymers identified through Fourier Transform Infrared Spectroscopy (FTIR) analysis. Cellulose-based textile fibers were also abundant (~40%). Our results indicate that the Amazon Continental Shelf is contaminated with moderate to high levels of MPs; the highest abundances were recorded at stations near land-based sources such as river mouths and large coastal cities.

Micro(nano)plastics in food system: potential health impacts on human intestinal system

Micro(nano)plastics (MNPs) in human food system have been broadly recognized by researchers and have drawn an increasing public attention to their potential health risks, particularly the risk to the intestinal system regarding the long-term exposure to MNPs through food consumption. This study aims to review the environmental properties (formation and composition) of MNPs and MNPs pollution in human food system following the order of food production, food processing and food consumption. The current analytic and identical technologies utilized by researchers are also summarized in this review. In fact, parts of commonly consumed food raw materials, processed food and the way to take in food all become the possible sources for human MNPs ingestion. In addition, the available literatures investigating MNPs-induced intestinal adverse effect are discussed from in vitro models and in vivo mammalian experiments, respectively. Particle translocation, cytotoxicity, damaged gut barrier, intestinal inflammation as well as microbial alteration are mostly reported. Moreover, the practical remediation strategies for MNPs pollution are also illustrated in the last section. This review is expected to provide a research insight for foodborne MNPs and arouse more public awareness of MNPs pollution in food and potential risk for human intestinal health.

Evaluating the role of biochar in mitigating the inhibition of polyethylene nanoplastics on anaerobic granular sludge

The extensive application of anaerobic granular sludge (AGS) to wastewater treatment for methane recovery has drawn considerable attention to the system performances affected by the presence of emerging contaminants in wastewater such as nanoplastics. However, effective strategies on how to mitigate the inhibition caused by nanoplastics remained unavailable. In this study, a novel strategy using biochar to mitigate the inhibition on the AGS performances caused by polyethylene nanoplastics (PE-NPs) was proposed and the corresponding mitigating mechanisms involved were explored. The PE-NPs solely decreased the level of methane recovery of AGS to 71.3 ± 2.7% of control, which was subsequently increased to 85.6 ± 0.8% of control with the presences of both biochar and PE-NPs, although biochar solely showed no obvious effect on methane production. The addition of biochar also elevated the granule size of AGS, along with AGS integrity based on the morphological observation. Moreover, the distributions of live cells and functional microbes related to acidification and methanation increased with biochar addition compared to sole PE-NPs exposure. More extracellular polymeric substance (EPS) was secreted when biochar was involved in AGS systems, with more protein being detected to maintain the granule structure of AGS. Evaluation of adsorption tests indicated that biochar possessed stronger affinity for PE-NPs than AGS, thus capturing the PE-NPs that would originally contact AGS and posing less toxicity to microorganisms.

Microplastics contamination in sediments from Portuguese inland waters: Physical-chemical characterisation and distribution

Plastics are the major constituent of waste accumulated in inland waters and subsequently transferred to the ocean. The smaller plastic particles, typically obtained from the fragmentation of larger pieces, are vehicles for food chain accumulation of plastic components and contaminants sorbed to these particles through their ingestion by small organisms. The monitoring of the level and trends of the contamination by microplastics is essential to determine the relevance and potential sources of this contamination necessary to define strategies to reduce this threat. This work presents microplastic contamination levels and trends of sediments of four Portuguese inland waters, namely Ria de Aveiro, Ria Formosa, Mira river, and Mondego river, between 02/2019 and 09/2020. The contamination is classified considering the type of polymer and size, shape, and colour of particles. Polymers are identified by micro-ATR-FTIR with true and false identification rates larger and lower than 95% and 5%, respectively. Duplicate analysis results are used to quantify contamination heterogeneity subsequently applied to assess if a specific contamination trend is not meaningful for a 99% confidence level. The analytical procedure is described in detail to clarify the scope of the analysis. Tests' quality is controlled by following strict quality control measures. Results from sixty-three sediment samples proved the ubiquitous presence of microplastic (MP) in these inland waters with contamination levels ranging between 20 MP kg^-1 and 1090 MP kg^-1, excluding six samples not contaminated with these particles. Overall, more than 86% of the microplastics were fragments lower than 1000 μm, and 33% were identified as polyethylene or polypropylene. A large diversity of microplastic colours was observed. For the Mondego River and Ria de Aveiro locations monitored for consecutive years, no significant variations of microplastic contamination were observed for a 99% confidence level.

Identification and Quantification of Microplastics in the Marine Environment Using the Laser Direct Infrared (LDIR) Technique

Here, we evaluate for the first time the performances of the newly developed laser direct infrared (LDIR) technique and propose an optimization of the initial protocol for marine microplastics (MPs) analysis. Our results show that an 8 μm porosity polycarbonate filter placed on a Kevley slide enables preconcentration and efficient quantification of MPs, as well as polymer and size determination of reference plastic pellets of polypropylene (PP), polyethylene (PE), polystyrene (PS), polyvinyl chloride (PVC), and polyethylene terephthalate (PET), with recoveries ranging from 80-100% and negligible blank values for particle sizes ranging from 200 to 500 μm. A spiked experiment using seawater, sediment, mussels, and fish stomach samples showed that the method responded linearly with significant slopes (R² ranging from 0.93-1.0; p < 0.001, p < 0.01). Overall, 11 polymer types were identified with limited handling and an analysis time of ca. 3 h for most samples and 6 h for complex samples. Application of this technique to Mediterranean marine samples (seawater, sediment, fish stomachs and mussels) indicated MP concentrations and size distribution consistent with the literature. A high predominance of PVC (sediment, fish stomachs) and PE and PP (seawater, mussels) was observed in the analyzed samples.

Occurrence of Microplastics in Borehole Drinking Water and Sediments in Lagos, Nigeria

We investigated the occurrence of microplastics in samples of borehole drinking water and sediments obtained from borehole sites in Lagos Island, Nigeria. The samples were digested with hydrogen peroxide, pretreated, and filtered through a polytetrafluoroethylene membrane. The filtered microplastics were examined/analyzed under an attenuated total reflection Fourier-transformed infrared device, to quantify the microplastics. The results showed the presence of microplastics in drinking water and sediments from the sites, with plastic concentrations ranging from 206 to 1691 items m^-3 and 9-47 items kg^-1 for drinking water and sediments, respectively; polypropylene was the most common and was approximately 61.9% for borehole drinking water. In terms of shape distribution, plastic fragments were the highest, at 73.02%. The detected microplastics had a size range of 0.02-0.5 mm. In addition, sites with a lower percentage of microplastics had lower population densities and lower industrial activity, whereas areas of high industrial activity had high amounts of microplastics. Environ Toxicol Chem 2022;41:1721-1731. © 2022 SETAC.

A Simple Sample Preparation Method to Significantly Improve Fourier Transform Infrared (FT-IR) Spectra of Microplastics

Spectroscopic analysis has become an essential part of the rapidly growing field of microplastic (MP) research. Here, we introduce a simple sample preparation method that dramatically improves results from Fourier transform infrared (FT-IR) analysis of MP and other environmental fibers. Our method provides cost-effective, reliable, high-quality spectra that achieve high-matching scores to polymer libraries. The efficacy of this method is demonstrated with two environmental datasets from Singapore and Phnom Penh that were collected while sampling for atmospheric MPs. The method developed and applied in this study is a simplification of the KBr method, where the analyzed fiber is pressed to a thickness of <10 μm; however, no KBr powder is required. For the combined dataset, 379 non-pressed fibers were analyzed with 193 (51%) returning a search score of ≥80% (chosen minimum search score threshold) and 259 pressed fibers, with 254 (98%) returning a search score of ≥80%. Direct comparisons of fibers before and after pressing show that the highest individual search score, and average search score from multiple single-point measurements, is overwhelmingly higher following our method. Our method immobilizes and improves the surface of the fiber, by creating a wider and uniform area for measurements. For FT-IR operators, this saves considerable time, improves reliability of the analysis, and, importantly, provides reproducibility of the spectra generated.

Emerging microplastics in the environment: Properties, distributions, and impacts

Microplastics (MPs) are emerging and recalcitrant micropollutants in the environment, which have attracted soaring interests from a wide range of research disciplines. To this end, numerous technologies have been devised to understand the properties, environmental behaviors, and potential impacts/hazards of MPs. Herein, we present a review on the properties, environmental distribution and possible impacts. In this review, a comprehensive introduction of the most universal types of MPs, their shapes and characters will be first presented. Then the distributions of MPs in the environment and the impacts on microbe, plants, and human will be reported. Finally, major challenges and directions will be discussed to provide some clues to the better understanding, control and migration of MPs pollution in future studies.

A review of atmospheric microplastics pollution: In-depth sighting of sources, analytical methods, physiognomies, transport and risks

Micro-sized plastics were first examined for atmospheric environment in 2016. From then on, they have been detected in both indoor and outdoor atmospheric samples, with indoor environments demonstrated as containing a big proportion of these particles. The sparse distribution of these particles, is attributed to their swift and long distance transportation that is mainly eased by their tiny size (1 μm to 5 mm) and low density. Due to ongoing limitation on detectable size, analysis methods together with a lack of standardized sampling and analytical procedures, few studies were conducted on airborne microplastics (MPs). Thus, the facts regarding the occurrence, global spatial distribution, fate, and threats to ecosystem and human health of airborne MPs, are still far from being fully clarified. This literature review is a broad depiction of a state of knowledge on atmospheric MPs. Within it, robust and concise information on the sources, inspection, transport, and threats pertaining to airborne MPs are presented. Particularly, the paper entails some information concerning traffic-generated MPs pollution, which has not been frequently discussed within previously published reports. In addition, this paper has widely unveiled sectors and aspects in need of further attention, with the gaps to be filled pinpointed.

Resin-based composite materials: elution and pollution

Pollution arises from all human activity and the provision of oral healthcare using resin-based composite restorative materials (RBCs) should be considered. This paper aims to provide a comprehensive review of the potential pollutant risk to the environment from the chemical compounds found in resin-based restorative materials, by including: 1) the principal pollutant compounds present in the resin matrix; 2) the degradation process of RBCs and its consequences; 3) the methods used for the detection and quantification of monomer elution and RBC microparticles; and 4) a review of the release mechanisms of eluates and RBC microparticles into the environment.

RBCs are pollutants by virtue of the compounds created during the degradation processes. These are in the form of the constituent eluted monomers and microparticles. Their impact on the environment and biodiversity is unknown. These materials are currently one of the main direct-placement restorative materials and their success is unquestionable when used and maintained correctly. Mitigation strategies for reducing the impact of pollution on the environment should be considered and implemented by all stakeholders and processes in the supply chain, from manufacturing, clinical use and waste management.

All the constituent components of resin-based composites have the potential to act as environmental pollutants as a consequence of their breakdown and subsequent elution.

Microparticles have a pollution potential as they are easily dispersed in solution and have an increased surface area that potentiates the elution of monomers.

Strategies to reduce their pollution impact should include: a) development of innovative direct-placement restorative materials; b) minimising waste; and c) providing good-quality preventive dentistry that minimises restoration failure and requirement for replacement.

Material-Specific Determination Based on Microscopic Observation of Single Microplastic Particles Stained with Fluorescent Dyes

Microplastics are increasingly suspected of having serious negative effects on ecological systems and living organisms. These effects are different based on the materials of the microplastics, leading to the importance of the determination of the materials. For material determination, spectral fingerprints based on FT-IR and Raman microspectroscopy are previously and commonly used, though they require patience and special skills. In this study, we have developed a novel technique for microscopic observation of single microplastic particles stained with fluorescent dyes to enable fluorescence-based determination of materials of these particles as a first screening of material determination. Commercially available and popular microplastic particles and fluorescent dyes were used. Fluorescence microscopy was carried out to observe the degree of fluorescent intensity for various combinations of microplastics and dyes based on the difference in fluorescent intensity of microplastics before and after staining with the dyes. We have found a dependence of the fluorescent intensity on the combination of the microplastics and the dye. Fluorescein gave the highest increase in intensity for PS (polystyrene), showing a statistically significant difference between fluorescent intensity for PS and that for PP (polypropylene) or PE (polyethylene). The use of Fluorescein thus enables specific detection of PS. On the other hand, Nile Red gave the highest increase in fluorescence for PP, indicating that the combination of Nile Red and PP gives a significantly greater interaction than with other combinations. The use of Nile Red thus enables the specific detection of PP. These results indicate the possibility of the material determination of microplastics by using fluorescent dyes. This is the first demonstration of the differential determination of the materials of single-particle microplastics based on a material-specific increase in fluorescent intensity by staining microplastics with fluorescent dyes.

Hazardous contaminants in plastics contained in compost and agricultural soil

Macro-, meso- and microplastic (MAP, MEP, MP) occurrence in compost is an environmental issue whose extent and effects are not yet understood. Here, we studied the occurrence of MAPs, MEPs and MPs in compost samples, and the transfer of hazardous contaminants from plastics to compost and soil. MAPs/MEPs and MPs concentrations in compost were 6.5 g/kg and 6.6 ± 1.5 pieces/kg; from common recommendations for compost application, we estimated ∼4-23 × 10⁷ pieces MPs and 4-29 × 10⁴ g MAPs/MEPs ha^-1 per year ending into agricultural soils fertilized with such compost. Regarding contaminants, bis(ethylhexyl) phthalate, acetyl tributyl citrate, dodecane and nonanal were extracted in higher concentrations from plastics and plastic-contaminated compost than from compost where MAPs/MEPs had been removed prior to extraction and analysis. However, some contaminants were present even after MAPs/MEPs removal, ascribable to short- and long-term release by MAPs/MEPs, and to the presence of MPs. DEHP concentration was higher in soils where compost was applied than in fields where it was not used. These results, along with estimations of plastic load to soil from the use of compost, show that compost application is a source of plastic pollution into agricultural fields, and that plastic might transfer hazardous contaminants to soil.

Maternal exposure to polystyrene nanoplastics causes brain abnormalities in progeny

As global plastic production continues to grow, microplastics released from a massive quantity of plastic wastes have become a critical environmental concern. These microplastic particles are found in a wide range of living organisms in a diverse array of ecosystems. In this study, we investigated the biological effects of polystyrene nanoplastic (PSNP) on development of the central nervous system using cultured neural stem cells (NSCs) and mice exposed to PSNP during developmental stages. Our study demonstrates that maternal administration of PSNP during gestation and lactating periods altered the functioning of NSCs, neural cell compositions, and brain histology in progeny. Similarly, PSNP-induced molecular and functional defects were also observed in cultured NSCs in vitro. Finally, we show that the abnormal brain development caused by exposure to high concentrations of PSNP results in neurophysiological and cognitive deficits in a gender-specific manner. Our data demonstrate the possibility that exposure to high amounts of PSNP may increase the risk of neurodevelopmental defects.

Recent Advances in Spectroscopic Techniques for the Analysis of Microplastics in Food

Microplastic pollution has become a worldwide concern in aquatic and terrestrial environments. Microplastics could also enter the food chain, causing potential harm to human health. To facilitate the risk assessment of microplastics to humans, it is critically important to have a reliable analytical technique to detect, quantify, and identify microplastics of various materials, sizes, and shapes from environmental, agricultural, and food matrices. Spectroscopic techniques, mainly vibrational spectroscopy (Raman and infrared), are commonly used techniques for microplastic analysis. This review focuses on recent advances of these spectroscopic techniques for the analysis of microplastics in food. The fundamental, recent technical advances of the spectroscopic techniques and their advantages and limitations were summarized. The food sample pretreatment methods and recent applications for detecting and quantifying microplastics in different types of food were reviewed. In addition, the current technical challenges and future research directions were discussed. It is anticipated that the advances in instrument development and methodology innovation will enable spectroscopic techniques to solve critical analytical challenges in microplastic analysis in food, which will facilitate the reliable risk assessment.

Biodegradation of microplastics: Better late than never

Plastics use is growing due to its applications in the economy, human health and aesthetics. The major plastic particles in the form of microplastics (MPs) released into the environment are made up of polyethylene (PE), polypropylene (PP), polyvinylchloride (PVC), and polyethylene terephthalate (PET). Tremendous usage and continuous accumulation of MPs in the environment pose a global threat to ecosystems and human health. The current knowledge of biotechnological, aerobic and aerobic biodegradation approaches emphasizes the microbial culture's potential towards MPs removal. This review selectively provides recent biotechnological advances such as biostimulation, bioaugmentation and enzymatic biodegradation that can be applied for MPs removal by biodegradation and bioaccumulation. This review summarizes the knowledge and the research exploration on the biodegradation of synthetic organic MPs with different biodegradability. However, further research is still needed to understand the underlying mechanism of MPs biodegradation in soil and water systems, leading to the development of an effective method for MPs removal.

Distribution and characterization of microplastics in marine sediments from the Montenegrin coast

PURPOSE

Plastic pollution in the world has led to an abundance of microplastics (MPs) and has been identified as a potential factor that can lead to serious environmental problems, especially in oceans and seas. Information on the current status of MPs pollution along the Montenegrin coast is insufficiently investigated. This study monitors the abundance, distribution, and sources of MPs, and identifies present polymers in the surface sediment of the Montenegrin coast, as well as comparison with previous research.

MATERIALS AND METHODS

Ten sampling sites along the Montenegrin coast were selected to collect surface sediment samples. The upper layer of sediment (0-5 cm) was collected by a Petite ponar grab. The samples were dried, and density separation was performed using a NaCl solution. The abundance and morphological characteristics of MPs were determined using an optical microscope (DP-Soft software), while FT-IR analysis was done to identify the polymer type.

RESULTS AND DISCUSSION

Microplastics were identified in all sediment samples with an average abundance of 307 ± 133 (SD) MPs/kg in dry sediment. The highest abundance of MPs was found in locations in the vicinity of highly populated areas, near wastewater discharges, and areas with high fishing and tourist activities. The most dominant shape types of MPs in all samples were filaments and fragments. The most common colors of MPs were blue and red, while the dominant MPs sizes were 0.1-0.5 mm and 0.5-1.0 mm. Of the eight identified polymers, PP, PE, and PET were the most common.

CONCLUSION

This study reveals MPs characteristics (abundance, distribution, shape type, colors, size, polymers type) in surface sediment along the Montenegrin coast, as well as the most significant sources of MPs pollution, and provides important data for further research on MPs to identify the effects of MPs pollution on the quality, health, and functionality of the marine environment.

Photoluminescence-Based Techniques for the Detection of Micro- and Nanoplastics

The growing numbers related to plastic pollution are impressive, with ca. 70 % of produced plastic (>350 tonnes/year) being indiscriminately wasted in the environment. The most dangerous forms of plastic pollution for biota and human health are micro‐ and nano‐plastics (MNPs), which are ubiquitous and more bioavailable. Their elimination is extremely difficult, but the first challenge is their detection since existing protocols are unsatisfactory for microplastics and mostly absent for nanoplastics. After a discussion of the state of the art for MNPs detection, we specifically revise the techniques based on photoluminescence that represent very promising solutions for this problem. In this context, Nile Red staining is the most used strategy and we show here its pros and limitations, but we also discuss other more recent approaches, such as the use of fluorogenic probes based on perylene‐bisimide and on fluorogenic hyaluronan nanogels, with the added values of biocompatibility and water solubility.

The microplastic pollution in beaches that served as historical nesting grounds for green turtles on Hainan Island, China

This study evaluated microplastic pollution in beaches that have served as historical nesting grounds for green turtles in Hainan Island, China and explored the sources of microplastic pollutants to conduct habitat restoration for sea turtles. The average abundance of the microplastics in the beach surface sediments was 2567.38 ± 2937.37 pieces·m^-2 or 641.85 ± 734.34 thousand pieces·m^-3, foam and plastic block were the main microplastics identified. Microplastic size was predominantly within the 0.05-1 mm category (small microplastic particles), and most microplastic particles were white. Polystyrene and polyethylene were the dominant plastic compositions. The type and compositions of microplastics indicate that most microplastics in this study were broken from large plastic blocks and foam. To reduce the threat of microplastic pollution to marine life, including sea turtles, we suggested removing plastic litter, especially small plastic on beaches, and replacing and recovering the foam used in aquaculture before it ages and fragments.

Science-society-policy interface for microplastic and nanoplastic: Environmental and biomedical aspects

The global concern over the possible consequences of the downsizing of plastic to microplastics (MPs) and nano plastics (NPs) needs to be addressed with a new conceptual framework. The transformation of plastics to MPs and NPs can be discussed in terms of fundamental physics principles applicable to micro and nanophase matter and colloidal science principles. Further, accurate and reliable detection and characterization of MPs and NPs are crucial for an extensive understanding of their environmental and ecological impacts. The other decisive factor that can classify MPs and NPs as hazardous to existing nanomaterials is discussing the cytotoxicity study on human cell lines. The human health risk assessment that might arise from the ingestion of MPs and NPs can be addressed about contrast agents used for medical imaging. However, the lack of standard analytical techniques for MPs and NPs measurement is an emerging challenge for analytical scientists due to their complex physicochemical properties, especially in environmental samples. This review article navigates readers through the point of origin of MPs and NPs and their interdisciplinary aspects. Biomedical applications of plastics and concerns over the toxicity of MPs and NPs are further analyzed. Moreover, the analytical challenges of MPs and NPs have been discussed with critical inputs. Finally, the worldwide efforts being made for creating a common platform of discussion on a different aspect of plastic pollution were taken into account.

Chemical Analysis of Microplastics and Nanoplastics: Challenges, Advanced Methods, and Perspectives

Microplastics and nanoplastics have become emerging particulate anthropogenic pollutants and rapidly turned into a field of growing scientific and public interest. These tiny plastic particles are found in the environment all around the globe as well as in drinking water and food, raising concerns about their impacts on the environment and human health. To adequately address these issues, reliable information on the ambient concentrations of microplastics and nanoplastics is needed. However, micro- and nanoplastic particles are extremely complex and diverse in terms of their size, shape, density, polymer type, surface properties, etc. While the particle concentrations in different media can vary by up to 10 orders of magnitude, analysis of such complex samples may resemble searching for a needle in a haystack. This highlights the critical importance of appropriate methods for the chemical identification, quantification, and characterization of microplastics and nanoplastics. The present article reviews advanced methods for the representative mass-based and particle-based analysis of microplastics, with a focus on the sensitivity and lower-size limit for detection. The advantages and limitations of the methods, and their complementarity for the comprehensive characterization of microplastics are discussed. A special attention is paid to the approaches for reliable analysis of nanoplastics. Finally, an outlook for establishing harmonized and standardized methods to analyze these challenging contaminants is presented, and perspectives within and beyond this research field are discussed.

Insight into the Interaction Between Microplastics and Microorganisms Based on a Bibliometric and Visualized Analysis

Microplastics are abundant in the environment and have been proven to affect ecosystems and human health. Microorganisms play essential roles in the ecological fate of microplastics pollution, potentially yielding positive and negative effects. This study reviews the research progress of interaction between microplastics and microorganisms based on a bibliometric and visualized analysis. Publication numbers, subjects, countries, institutions, highly cited papers, and keywords were investigated by statistical analysis. VOSviewer software was applied to visualize the co-occurrence and aggregation of national collaboration, subjects, and keywords. Results revealed trends of rapidly increasing publication output that involved multiple disciplines. Contributing countries and their institutions were also identified in this study. Keywords, co-occurrence network visualization, highly cited papers analysis, and knowledge-based mining were all used to give insight into microorganisms or microbiota related to microplastics pollution, and the potential impacts that microplastics biodegradation may cause. In the future, research efforts need to focus on the following areas: microbial degradation processes and mechanisms, assessment of ecological microplastics risks, and potential effects of microplastics bioaccumulation and human exposure. This study provides a holistic view of ongoing microplastics and related microbial research, which may be useful for future microplastics biodegradation studies.

Microplastics: An overview on separation, identification and characterization of microplastics

At present plastic residues has become grave threat to the environment. Microplastics are plastic residues with a size <5 mm, due to their small size it is very difficult to remove them from water bodies, sediments and air with available techniques. Nanoplastics are different in size range as nanoplastics are smaller than 1 μm in size. This review is an attempt to gather an insight towards microplastic and its associated point of concerns. The review will highlight some of the methods appropriate for microplastics sampling and techniques for its identification in environmental samples. Some of the sampling methods include sieving, filtration, visual sorting, digestion, density separation. While, identification techniques in practice are SEM-EDS, FTIR, NIR, Raman, NMR spectroscopy, etc. Still there is a need and scope for development of more economical and portable techniques in this direction.

Potassium carbonate (K2CO3) - A cheap, non-toxic and high-density floating solution for microplastic isolation from beach sediments

Beaches are good indicators for local microplastic distribution and pollution. Multiple methods have been developed for extracting microplastics from sediment through density separation. However, the chemicals applied are often expensive and harmful to the user or the environment. We briefly review the problems associated with the use of these chemicals and present a new floatation medium, potassium carbonate (K₂CO₃), that has many advantages over other available media. It is non-toxic and cheap, and with a density of 1.54 g/cm³ the K₂CO₃ solution yielded a mean recovery rate of around 90% for PVC, one of the densest polymers, that cannot be easily extracted with alternative floatation media. We propose that the use of K₂CO₃ is particularly promising for long term and large-scale monitoring studies, because it allows involving citizen scientists in such studies, leading to an increased public awareness of the plastic problem in the seas.