Improving the reliability of aquatic toxicity testing of hydrophobic chemicals via equilibrium passive dosing - A multiple trophic level case study on bromochlorophene

NSO-heterocyclic PAHs - Controlled exposure study reveals high acute aquatic toxicity

Environmental occurrence and hazardous nature of heterocyclic polyaromatic hydrocarbons (heterocyclic PAHs) has the potential to threaten the health of aquatic ecosystems. Here, we investigate the acute toxicity of heterocyclic PAHs (log KOW 3.7-6.9) to aquatic organisms: marine bacteria (Aliivibrio fischeri), freshwater green algae (Raphidocelis subcapitata), and water fleas (Daphnia magna) using passive dosing to maintain stable exposure. The membrane-water partition coefficient (KMW) of the heterocycles was measured to elucidate its relationship with toxicity. Our findings show that the tested heterocycles had little inhibitory effect on A. fischeri, while most compounds were highly toxic to R. subcapitata and D. magna. Toxicity generally increased with increasing KMW values, and nonpolar narcosis was identified as the most likely mode of toxic action of the heterocycles. Comparison of standard protocols with passive dosing emphasizes the importance of maintaining a constant concentration during toxicity testing, as very high losses occurred in standard tests and passive dosing experiments revealed higher toxicities. These results indicate a potentially high risk to aquatic life and call for more in-depth investigation of the (eco)toxic effects of NSO-PAHs.

Environmental benefits from the use of CO2 in the thermal disposal of cigarette butts

As the global consumption of cigarettes has increased, the massive generation of cigarette butts (CBs) has led to critical environmental and health problems. Landfilling or incineration of CBs has been conventionally carried out, but such disposal protocols have suffered from the potential risks of the unwanted/uncontrolled release of leachates, carcinogens, and toxic chemicals into all environmental media. Thus, this study focuses on developing an environmentally dependable method for CB disposal. Littered CBs from filtered/electronic cigarettes were valorized into syngas (H₂/CO). To seek a greener approach for the valorization of CBs, CO₂ was intentionally considered as a reaction intermediate. Prior to multiple pyrolysis studies, the toxic chemicals in the CBs were qualitatively determined. This study experimentally proved that the toxic chemicals in CBs were detoxified/valorized into syngas. Furthermore, this work demonstrated that CO₂ was effective in thermally destroying toxic chemicals in CBs via a gas-phase reaction. The reaction features and CO₂ synergistically enhance syngas production. With the use of a supported Ni catalyst and CO₂, syngas production from the catalytic pyrolysis of CBs was greatly enhanced (approximately 4 times). Finally, the gas-phase reaction by CO₂ was reliably maintained owing to the synergistic mechanistic/reaction feature of CO₂ for coke formation prevention on the catalyst surface.

Dosing Methods to Enable Cell-Based In Vitro Testing of Complex Substances: A Case Study with a PAH Mixture

Cell-based testing of multi-constituent substances and mixtures for their potential adverse health effects is difficult due to their complex composition and physical-chemical characteristics. Various extraction methods are typically used to enable studies in vitro; however, a limited number of solvents are biocompatible with in vitro studies and the extracts may not fully represent the original test article's composition. While the methods for dosing with "difficult-to-test" substances in aquatic toxicity studies are well defined and widely used, they are largely unsuited for small-volume (100 microliters or less) in vitro studies with mammalian cells. Therefore, we aimed to evaluate suitability of various scaled-down dosing methods for high-throughput in vitro testing by using a mixture of polycyclic aromatic hydrocarbons (PAH). Specifically, we compared passive dosing via silicone micro-O-rings, cell culture media-accommodated fraction, and traditional solvent (dimethyl sulfoxide) extraction procedures. Gas chromatography-tandem mass spectrometry (GC-MS/MS) was used to evaluate kinetics of PAH absorption to micro-O-rings, as well as recovery of PAH and the extent of protein binding in cell culture media with and without cells for each dosing method. Bioavailability of the mixture from different dosing methods was also evaluated by characterizing in vitro cytotoxicity of the PAH mixture using EA.hy926 and HepG2 human cell lines. Of the tested dosing methods, media accommodated fraction (MAF) was determined to be the most appropriate method for cell-based studies of PAH-containing complex substances and mixtures. This conclusion is based on the observation that the highest fraction of the starting materials can be delivered using media accommodated fraction approach into cell culture media and thus enable concentration-response in vitro testing.

Scientific concepts and methods for moving persistence assessments into the 21st century

The evaluation of a chemical substance's persistence is key to understanding its environmental fate, exposure concentration, and, ultimately, environmental risk. Traditional biodegradation test methods were developed many years ago for soluble, nonvolatile, single-constituent test substances, which do not represent the wide range of manufactured chemical substances. In addition, the Organisation for Economic Co-operation and Development (OECD) screening and simulation test methods do not fully reflect the environmental conditions into which substances are released and, therefore, estimates of chemical degradation half-lives can be very uncertain and may misrepresent real environmental processes. In this paper, we address the challenges and limitations facing current test methods and the scientific advances that are helping to both understand and provide solutions to them. Some of these advancements include the following: (1) robust methods that provide a deeper understanding of microbial composition, diversity, and abundance to ensure consistency and/or interpret variability between tests; (2) benchmarking tools and reference substances that aid in persistence evaluations through comparison against substances with well-quantified degradation profiles; (3) analytical methods that allow quantification for parent and metabolites at environmentally relevant concentrations, and inform on test substance bioavailability, biochemical pathways, rates of primary versus overall degradation, and rates of metabolite formation and decay; (4) modeling tools that predict the likelihood of microbial biotransformation, as well as biochemical pathways; and (5) modeling approaches that allow for derivation of more generally applicable biotransformation rate constants, by accounting for physical and/or chemical processes and test system design when evaluating test data. We also identify that, while such advancements could improve the certainty and accuracy of persistence assessments, the mechanisms and processes by which they are translated into regulatory practice and development of new OECD test guidelines need improving and accelerating. Where uncertainty remains, holistic weight of evidence approaches may be required to accurately assess the persistence of chemicals. Integr Environ Assess Manag 2022;18:1454-1487. © 2022 The Authors. Integrated Environmental Assessment and Management published by Wiley Periodicals LLC on behalf of Society of Environmental Toxicology & Chemistry (SETAC).

Passive dosing: Assessing the toxicity of individual PAHs and recreated mixtures to the microalgae Raphidocelis subcapitata

Risk assessment of hydrophobic organic compounds (HOCs) is difficult because maintaining a well-defined exposure during aquatic toxicity testing is challenging due to the limited water solubility and various loss processes such as volatilization, biodegradation and sorption. Passive dosing techniques help to overcome these challenges by providing a well-controlled and solvent-free exposure. In this study, the algal growth inhibition test (DIN EN ISO 8692) was converted into a miniaturized passive dosing setting. For this purpose, biocompatible O-rings were used as substance reservoirs and loaded with polycyclic aromatic hydrocarbons (PAHs). The growth inhibition of the microalgae Raphidocelis subcapitata induced by single PAHs (log K_OW 3.24-5.91) was investigated. In addition, recreated PAH mixtures were tested representing field compositions of the pore water North Sea sediments. Some of the single PAHs revealed strong growth inhibiting effects on the algal growth, while the recreated mixture compositions had slightly lower effect on the growth inhibition in the highest concentrations. Overall, the toxicity of the PAHs generally increased with the maximum chemical activities (a_max) of the PAHs and the inhibition data could be fitted with one maximum chemical activity response curve. Therefore, the miniaturized passive dosing approach appears as a promising practical and economical method that can be used for toxicity testing of the different trophic levels to improve comprehensive risk assessment.

Toxicological Assessment of Bromochlorophene: Single and Repeated-Dose 28-Day Oral Toxicity, Genotoxicity, and Dermal Application in Sprague-Dawley Rats

Bromochlorophene (BCP) has shown good properties in sterilization and antibacterial activity and is widely used as a household chemical. We evaluated the genotoxicity, single and repeated-dose 28-day oral toxicity, and dermal application of a BCP suspension in Sprague–Dawley (SD) rats. For the single-dose toxicity study, a dose of 25–1,000 mg per kg of bodyweight (mg/kg b.w.) of BCP was given once orally to SD rats. Mortality and clinical signs were observed and recorded for the first 30 min after treatment, at 4 h post-administration, and then at least once daily for 14 days after administration. For the repeated-dose 28-day toxicity study, the high dose was set at 1,000 mg/kg b.w. and the middle, middle-low, and low dose were set to 500, 250, and 125 mg/kg, respectively. Hematology and biochemistry parameters were examined. Gross pathologic and histopathologic examinations were performed on selected tissues from all animals. A bacterial reverse mutation assay, in vitro chromosomal aberration assay, and in vivo micronucleus assay were performed to assess genotoxicity-dermal application exposure assessment of BCP in rats. A high oral approximate lethal dose (ALD) of 1,000 mg/kg was observed in the single-dose toxicity test. During the repeated-dose 28-day time period, most animal deaths after administration occurred during the first 3 weeks. The 1,000 mg/kg b.w. oral dose caused the death of six male rats (6/7) and four female rats (4/7). At 500 mg/kg b.w., the female rats showed mortality (1/7). For the biochemistry assays, cholesterol was increased significantly compared to vehicle in both sexes in the 250 and 500 mg/kg groups. Histopathological changes with treatment-related findings were observed in the pancreas in female rats treated with a high dose of BCP compared with the vehicle group. BCP showed no genotoxic effect. These data suggested that the ALD of BCP, estimated as a non-genotoxic substance, was over 1,000 mg/kg b.w. in the single-dose toxicity study, and the NOAEL of BCP was considered to be 250 mg/kg b.w. for male and female rats after repeated oral administration for 28 days under the present study conditions.

Assessing toxicity of hydrophobic aliphatic and monoaromatic hydrocarbons at the solubility limit using novel dosing methods

Reliable delineation of aquatic toxicity cut-offs for poorly soluble hydrocarbons is lacking. In this study, vapor and passive dosing methods were applied in limit tests with algae and daphnids to evaluate the presence or absence of chronic effects at exposures corresponding to the water solubility for representative hydrocarbons from five structural classes: branched alkanes, mono, di, and polynaphthenic (cyclic) alkanes and monoaromatic naphthenic hydrocarbons (MANHs). Algal growth rate and daphnid immobilization, growth and reproduction served as the chronic endpoints investigated. Results indicated that the dosing methods applied were effective for maintaining mean measured exposure concentrations within a factor of two or higher of the measured water solubility of the substances investigated. Chronic effects were not observed for hydrocarbons with an aqueous solubility below approximately 5 μg/L. This solubility cut-off corresponds to structures consisting of 13-14 carbons for branched and cyclic alkanes and 16-18 carbons for MANHs. These data support reliable hazard and risk evaluation of hydrocarbon classes that comprise petroleum substances and the methods described have broad applicability for establishing empirical solubility cut-offs for other classes of hydrophobic substances. Future work is needed to understand the role of biotransformation on the observed presence or absence of toxicity in chronic tests.

Triclocarban, Triclosan, Bromochlorophene, Chlorophene, and Climbazole Effects on Nuclear Receptors: An in Silico and in Vitro Study

BACKGROUND

Endocrine-disrupting chemicals can interfere with hormonal homeostasis and have adverse effects for both humans and the environment. Their identification is increasingly difficult due to lack of adequate toxicological tests. This difficulty is particularly problematic for cosmetic ingredients, because in vivo testing is now banned completely in the European Union.

OBJECTIVES

The aim was to identify candidate preservatives as endocrine disruptors by in silico methods and to confirm endocrine receptors' activities through nuclear receptors in vitro.

METHODS

We screened preservatives listed in Annex V in the European Union Regulation on cosmetic products to predict their binding to nuclear receptors using the Endocrine Disruptome and VirtualToxLab™ version 5.8 in silico tools. Five candidate preservatives were further evaluated for androgen receptor (AR), estrogen receptor (ER α ), glucocorticoid receptor (GR), and thyroid receptor (TR) agonist and antagonist activities in cell-based luciferase reporter assays in vitro in AR-EcoScreen, hER α -HeLa- 9903 , MDA-kb2, and GH3.TRE-Luc cell lines. Additionally, assays to test for false positives were used (nonspecific luciferase gene induction and luciferase inhibition).

RESULTS

Triclocarban had agonist activity on AR and ER α at 1 μ M and antagonist activity on GR at 5 μ M and TR at 1 μ M . Triclosan showed antagonist effects on AR, ER α , GR at 10 μ M and TR at 5 μ M , and bromochlorophene at 1 μ M (AR and TR) and at 10 μ M (ER α and GR). AR antagonist activity of chlorophene was observed [inhibitory concentration at 50% (IC50) IC 50 = 2.4 μ M ], as for its substantial ER α agonist at > 5 μ M and TR antagonist activity at 10 μ M . Climbazole showed AR antagonist (IC 50 = 13.6 μ M ), ER α agonist at > 10 μ M , and TR antagonist activity at 10 μ M .

DISCUSSION

These data support the concerns of regulatory authorities about the endocrine-disrupting potential of preservatives. These data also define the need to further determine their effects on the endocrine system and the need to reassess the risks they pose to human health and the environment. https://doi.org/10.1289/EHP6596.

Comparing passive dosing and solvent spiking methods to determine the acute toxic effect of pentachlorophenol on Daphnia magna

Pentachlorophenol (PCP) is a widespread and persistent hydrophobic organic pollutant in the environment despite its restricted public use. Risk assessment of such hydrophobic organic compounds (HOCs) is challenging because sorption and volatilization issues during toxicity test often lead to inconsistent exposure concentration. Considering the hydrophobicity of the PCP, in this study, a passive dosing format was applied by adopting a silicone O-ring as a reservoir and evaluated its applicability on the determination of PCP on Daphnia magna. Results obtained with passive dosing method were compared with that of solvent spiking method. We hypothesized that the passive dosing method may provide more reliable and accurate toxicity results than conventional solvent spiking approach. As a result, the partition coefficient of PCP between methanol and a test medium (log K_MeOH:ISO) was 2.1, which enabled the maintenance of reliable exposure concentration throughout the experiment. In the acute toxicity tests, passive dosing and solvent spiking showed similar EC50 values of 576 and 485 µg/L for 24 h, and 362 and 374 µg/L for 48 h, respectively, which overlap with EC50 values of previous studies. Altogether, both methods were suitable for the acute toxicity assessment of hydrophobic PCP.

Development of predictive models for silicone rubber-water partition coefficients of hydrophobic organic contaminants

The silicone rubber passive sampling technique is extensively applied to monitor the aqueous freely dissolved concentration of hydrophobic organic compounds (HOCs). The silicone rubber-water partition coefficient (Ksrw) is an important parameter to accurately measure the concentrations of chemicals using passive sampling devices. In this study, two theoretical linear solvation energy relationship (TLSER) models and a quantitative structure-property relationship (QSPR) model were developed for predicting the Ksrw of HOCs. The 119 model compounds studied here included 31 personal care products, such as musks, UV-filters, and organophosphate flame retardants, as well as "conventional" pollutants, such as polycyclic aromatic hydrocarbons and polychlorinated biphenyls. The statistical parameters indicated that the final QSPR model with seven descriptors for all 119 chemicals had a satisfactory goodness-of-fit (Radj2 = 0.898), robustness (QLOO2 = 0.881) and predictive ability (Qext-F1,2,32 = 0.897-0.926). In comparison, the results of one TLSER model with four descriptors for 113 chemicals (Radj2 = 0.826, QLOO2 = 0.790, Qext-F1,2,32 = 0.805-0.837) and another TLSER model with one descriptor for 5 chemicals (Radj2 = 0.747, QLOO2 = 0.647) were also acceptable. The applicability domains of the obtained models covered chemicals containing hydroxyl, imino groups, carbonyl groups, ether bonds, halogen atoms, sulfur atoms, phosphorus atoms, nitro groups, and cyano groups. In addition, the structural features governing the partition behavior of chemicals between silicone rubber and water were explored through interpretation of appropriate mechanisms.

Evaluation of the bioaccumulation of octocrylene after dietary and aqueous exposure

Octocrylene is used as UV filter in personal care products with a high production volume and can be detected in surface water and biota. It is liquid at ambient temperature, highly lipophilic, has a high adsorption capacity to organic material and is considered as persistent in the environment. The very low water solubility complicates the evaluation of potential long-term effects in aquatic toxicity testing, since effect thresholds are often above the water solubility limit. Thus, the evaluation of the bioaccumulation potential becomes highly relevant for the assessment of long-term environmental effects. However, even the determination of the water solubility limit for a substance with such difficult properties is challenging. The following experiments are described, and results compared to available environmental monitoring data: A bioconcentration study with aqueous exposure (BCF) in zebrafish and a biomagnification study with dietary exposure (BMF) in rainbow trout, as well as supporting experiments to evaluate the water solubility. The growth and lipid corrected BCF determined by aqueous exposure was 858 L kg^-1 while the corrected BMF was 0.0335. The model-based estimation of the BCF from BMF (152-1182 L kg^-1) is in good agreement with the measured BCF value. Environmental monitoring data provide only limited information on the bioaccumulation potential of octocrylene, as only few investigations were made in biota and water in parallel and concentrations of octocrylene vary by several orders of magnitude during seasons. Based on the determined fish BCF data, we conclude that OCR is not bioaccumulative according to the criteria as laid down by ECHA, 2017. Furthermore, the low BMF value indicates no accumulation along the food chain.

Demonstrating the need for chemical exposure characterisation in a microplate test system: toxicity screening of sixteen pesticides on two marine microalgae

Pesticides used in viticulture create a potential risk for the aquatic environment due to drift during application, runoff and soil leaching. The toxicity of sixteen pesticides and one metabolite were evaluated on the growth of two marine microalgae, Tisochrysis lutea and Skeletonema marinoi, in 96-h exposure assays conducted in microplates. For each substance, concentrations of stock solutions were analytically measured and abiotic assays were performed to evaluate the chemical stability of pesticides in microplates. For two chemicals, microalgae exposures were run simultaneously in microplates and culture flasks to compare EC₅₀ calculated from the two exposure systems. Results from chemical analyses demonstrated the low stability of hydrophobic pesticides (log K_OW > 3). For such chemicals, EC₅₀ values calculated using measured pesticide concentrations were two-fold lower than those first estimated using nominal concentrations. Photosystem II inhibitors were the most toxic herbicides, with EC₅₀ values below 10 μg L^-1 for diuron and around double this for isoproturon. Chlorpyrifos-methyl was the only insecticide to significantly affect the growth of T. lutea, with an EC₅₀ around 400 μg L^-1. All fungicides tested were significantly toxic to both species: strobilurins showed low overall toxicity, with EC₅₀ values around 400 μg L^-1, whereas quinoxyfen, and spiroxamine, showed high toxicity to both species, especially to T. lutea, with an EC₅₀ below 1 μg L^-1 measured for spiroxamine in culture flasks. This study highlights the need to perform chemical analyses for reliable toxicity assessment and discusses the advantages and disadvantages of using microplates as a toxicity screening tool.

Miniaturised Marine Algae Test with Polycyclic Aromatic Hydrocarbons - Comparing Equilibrium Passive Dosing and Nominal Spiking

In this study the miniaturised Marine Algae Test (mMAT) using passive dosing was developed based on the ISO EN DIN10253 to investigate the growth inhibition of the marine diatom Phaeodactylum tricornutum caused by polycyclic aromatic hydrocarbons (PAHs). Risk assessment of hydrophobic organic compounds (HOCs) like PAHs in aquatic toxicity tests is very difficult due to their low aqueous solubilities, losses via sorption to the wells and volatilisation. However, passive dosing can overcome these challenges. In this study biocompatible silicone O-rings were used as PAH reservoir. Individual PAHs at saturation were tested using passive dosing and in comparison with nominal spiking. Additionally, a recreated mixture of PAHs reflecting the field composition of the sediment pore water was tested with passive dosing. PAHs revealed strong growth inhibiting effects on algal growth in passive dosing tests, while nominal spiking had only slightly growth inhibiting effects in the highest concentration. The recreated PAH mixture revealed slightly inhibiting effects using passive dosing when tested with a factor of 5000 of the field concentration. This study demonstrates the superiority of passive dosing to spiking and further the successful implementation of passive dosing in the marine algae test maintaining a constant concentration for HOCs with a log KOW > 4.6.