Targeted modulation of g-C3N4 photocatalytic performance for pharmaceutical pollutants in water using ZnFe-LDH derived mixed metal oxides: Structure-activity and mechanism

Degradation of pharmaceuticals and other emerging pollutants employing bi-metal catalysts/magnesium and/or (green) hydrogen in aqueous solution

Contaminations by pharmaceuticals, personal care products, and other emerging pollutants in water resources have become a seriously burgeoning issue of global concern in the first third of the twenty-first century. As societal reliance on pharmaceuticals continues to escalate, the inadvertent introduction of these substances into water reservoirs poses a consequential environmental threat. Therefore, the aim of this study was to investigate reductive degradation, particularly, catalytic hydrogenation regarding model pollutants such as diclofenac (DCF), ibuprofen (IBP), 17α-ethinylestradiol (EE2), or bisphenol-A (BPA), respectively,  in aqueous solutions at lab scale. Iron bimetals (zero valent iron, ZVI, and copper, Cu, or nickel, Ni) as well as zero valent magnesium (Mg, ZVM) in combination with  rhodium, Rh, or palladium, Pd, as hydrogenation catalysts (HK), were investigated. Studies were executed through various short-term batch experiments, with multiple sample collections, over a total range of 120 min. The results indicated that DCF was attenuated at over 90 % when exposed to Fe-Cu or a Fe-Ni bimetal (applied as a single model pollutant). However, when DCF was part of a mixture alongside with IBP, EE2, and BPA, the attenuation efficacy decreased to 79 % with Fe-Cu and 23 % with Fe-Ni. Conversely, both IBP and BPA exhibit notably low attenuation levels with both bimetals, less than 50 %, both deployed as single substances or in mixtures. No reaction (degradation) products could be identified employing LC-MS, but sometimes a release of the parent pollutant when applying an acetic acid buffer could be noted to a certain extent, suggesting adsorption processes on corrosion products such as iron hydroxide and/or oxides. Surprisingly, Mg in combination with Rh (Rh-HK) or Pd (Pd-HK) showed a significantly rapid decrease in the concentrations of DCF, EE2, and BPA, in part up to approximately 100 %, that is, within a few minutes only in part due to hydrogenation degradation reactions (related reaction products could actually be identified by LC-MS; adsorption processes were not observed here). Moreover, kinetic modeling of the DCF degradation with Mg-Rh-HK was conducted at different temperatures (15 °C, 20 °C, 25 °C, 35 °C) and varied initial concentrations (2.5 mg/L, 5.0 mg/L, 7.5 mg/L, 10.0 mg/L). The outcomes prove that the degradation of DCF at the Rh-HK's surface followed a modified first-order kinetics, most probably by catalytic hydrodehalogenation and subsequent hydrogenation of the aromatic moieties (molecular hydrogen was provided by the corrosion of Mg). From the determined reaction rate constants at four different temperatures, the activation energy was estimated to be 59.6 kJ/mol by means of the Arrhenius equation what is in good agreement with similar results reported in the literature. This coupled hydrodehalogenation and hydrogenation approach may be upscaled into a new promising technical process for comprehensively removing such pharmaceuticals and similar pollutants in sewage plants in a single step, furthermore, even in combination with adsorption by activated carbon and/or ozonation which have already been established at some sewage plants in Switzerland and Germany recently.

Recent Advances in LDH/g-C3N4 Heterojunction Photocatalysts for Organic Pollutant Removal

Environmental pollution has been decreased by using photocatalytic technology in conjunction with solar energy. An efficient method to obtain highly efficient photocatalysts is to build heterojunction photocatalysts by combining graphitic carbon nitride (g-C3N4) with layered double hydroxides (LDHs). In this review, recent developments in LDH/g-C3N4 heterojunctions and their applications for organic pollutant removal are systematically exhibited. The advantages of LDH/g-C3N4 heterojunction are first summarized to provide some overall understanding of them. Then, a variety of approaches to successfully assembling LDH and g-C3N4 are simply illustrated. Last but not least, certain unmet research needs for the LDH/g-C3N4 heterojunction are suggested. This review can provide some new insights for the development of high-performance LDH/g-C3N4 heterojunction photocatalysts. It is indisputable that the LDH/g-C3N4 heterojunctions can serve as high-performance photocatalysts to make new progress in organic pollutant removal.

Layered by layered construction of three novel ZnCo-LDHs/g-C3N4 for the removal of sunset yellow by adsorption-photocatalytic process

The removal of organic dyes has attracted attention by adsorption-photocatalytic synergetic process in water treatment technology. Three novel ZnCo-LDHs/g-C3N4 were successfully prepared for the first time by layered construction technique through the hydrolysis of triethanolamine in this paper. They exhibited high specific surface area which facilitates the adsorption of sunset yellow (SY) from solution to catalyst surface. All the target pollutant dyes are very effectively removed by the three ZnCo-LDHs/g-C3N4 composites through synergetic effect of adsorption and photocatalysis process under UV irradiation (λ = 365 nm). The order of synergistic degradation effect for SY is as follows: ZnCo-LDHs/g-C3N4-3 (99.6%) > ZnCo-LDHs/g-C3N4-2 (99.5%) > ZnCo-LDHs/g-C3N4-1 (99.3%) > pure g-C3N4 (77.4%) > pure ZnCo-LDHs (44.2.6%) at the initial concentration of 75 mg L-1. ZnCo-LDHs/g-C3N4-3 has the largest k value (0.0284 min-1) in SY degradation, which is 2.8 times that of g-C3N4. ZnCo-LDHs/g-C3N4-3 is a very promising adsorption-photocatalyst for the removal of SY from wastewater. The electron spin resonance experiments demonstrate that OH·, 1O2, and O2- are the dominant active species and oxides SY together. This result demonstrates that the three ZnCo-LDHs/g-C3N4 have practical applications as efficient adsorption-photocatalytic materials and also provides a synergetic strategy for the removal of SY wastewater.

A Review on the Use of Metal Oxide-Based Nanocomposites for the Remediation of Organics-Contaminated Water via Photocatalysis: Fundamentals, Bibliometric Study and Recent Advances

The improper disposal of toxic and carcinogenic organic substances resulting from the manufacture of dyes, drugs and pesticides can contaminate aquatic environments and potable water resources and cause serious damage to animal and human health and to the ecosystem. In this sense, heterogeneous photocatalysis stand out as one effective and cost-effective water depollution technique. The use of metal oxide nanocomposites (MON), from the mixture of two or more oxides or between these oxides and other functional semiconductor materials, have gained increasing attention from researchers and industrial developers as a potential alternative to produce efficient and environmentally friendly photocatalysts for the remediation of water contamination by organic compounds. Thus, this work presents an updated review of the main advances in the use of metal oxide nanocomposites-based photocatalysts for decontamination of water polluted by these substances. A bibliometric analysis allowed to show the evolution of the importance of this research topic in the literature over the last decade. The results of the study also showed that hierarchical and heterogeneous nanostructures of metal oxides, as well as conducting polymers and carbon materials, currently stand out as the main materials for the synthesis of MON, with better photocatalysis performance in the degradation of dyes, pharmaceuticals and pesticides.

Loose Nanofiltration Membrane Incorporating CeZnFe Layered Double Hydroxide with Enhanced Dye/Salt Separation Performance and Self-Cleaning Ability

The high-salinity wastewater from the textile industry faces a significant challenge in effectively separating dyes and salts. In this study, a CeZnFe-layered double hydroxide (LDH)-incorporated nanofiltration (LNF) membrane was fabricated using the conventional interfacial polymerization (IP) technique to fractionate dyes and salts within the wastewater. The impact of CeZnFe LDH on various aspects of membrane performance was examined, including water flux, dye removal efficiency, dye/salt separation capability, self-cleaning ability, and membrane integrity. The addition of LDHs resulted in improved membrane surface hydrophilicity, thereby enhancing water flux. The optimized TFN membrane (0.050 wt% LDH in PIP solution) significantly improved pure water flux, exceeding 150%. All TFN membranes exhibited excellent performance in dye and salt fractionation (93% for Congo red, 2.6% for NaCl, and 40.7% for Na2SO4). Also, excellent self-cleaning ability was observed for the optimized membrane, exhibiting a remarkable water flux recovery rate after three operation cycles. Moreover, including CeZnFe LDH in the optimized TFN membrane played a significant role in enhancing membrane integrity. This study provides new inspiration for fabricating self-cleaning loose NF membranes using CeZnFe LDH for effective dye/salt separation.

Facile fabrication of a 2D/2D CoFe-LDH/g-C3N4 nanocomposite with enhanced photocatalytic tetracycline degradation

The widespread use of tetracycline (TC) in medicine and agriculture has caused severe pollution problems in the environment. In this work, a nanocomposite comprising of CoFe-layered double hydroxides grown on graphitic carbon nitride nanosheets (CoFe-LDH/g-C₃N₄) with a notable two-dimensional/two-dimensional (2D/2D) heterostructure was synthesized through a facile co-precipitation method. The CoFe-LDH/g-C₃N₄ nanocomposite displayed significantly improved visible-light-driven photocatalytic activity towards TC degradation, compared to pristine g-C₃N₄ and CoFe-LDH alone. The enhanced activation efficiency was a result of intimate interfacial contact, enlarged the surface area, broadened visible-light absorbance, and enhanced photogenerated electron transfer. The scavenging experiments showed that holes (h⁺) and superoxide radical anions (‧O₂^-) played a crucial role in TC degradation. Factors including the type of TCs, initial concentration of TC, presence of ions, and the type of water matrix were investigated to evaluate the practical feasibility of the nanocomposites for TC removal from antibiotics-contaminated water. The repeated tests showed that the nanocomposites possessed good stability and recyclability. This study demonstrated the feasibility of achieving photocatalytic activity enhancement of g-C₃N₄ through the formation of a 2D-2D heterostructure between LDHs and g-C₃N₄.

Degradation of tetracycline antibiotic utilizing light driven-activated oxone in the presence of g-C3N4/ZnFe LDH binary heterojunction nanocomposite

In the present study, a binary heterojunction nanocomposite composed of graphitic carbon nitride (g-C₃N₄) and Zn/Fe-contained layered double hydroxide (ZnFe LDH) was employed as heterogeneous catalyst for the decomposition of tetracycline (TC) antibiotic utilizing Oxone and UV light irradiation. The sole use of g-C₃N₄/ZnFe LDH as adsorbent led to the negligible elimination of TC. In addition, the sole use of Oxone or UV (photolysis) and even their combination were not effective enough to degrade the target pollutant, while the combined process of g-C₃N₄/ZnFe LDH/Oxone/photolysis revealed significantly enhanced (synergistic) degradation of TC (92.4% within 30 min). Indirect detection tests for the identification of free radical species indicated the major role of both hydroxyl (^•OH) and sulfate (SO₄^•-) radicals in the degradation of TC by the g-C₃N₄/ZnFe LDH/Oxone/photolysis system. The elimination of TC followed a pseudo-first order kinetic model. The complete degradation of TC (degradation efficiency of 100%) was achieved within the reaction time of 25 min when ultrasound (US) was applied as enhancing agent. Furthermore, the results of total organic carbon (TOC) analysis were used to exhibit progress in the mineralization of the pollutant. The bioassay results indicated the decreased toxicity of the process effluent toward microbial population of Escherichia coli after the treatment.

Novel sphere-like copper bismuth oxide fabricated via ethylene glycol-introduced solvothermal method with improved adsorptive and photocatalytic performance in sulfamethazine removal

In this research, ethylene glycol-introduced solvothermal method was employed to fabricate a novel sphere-like CuBi₂O₄ material to improve the adsorptive and photocatalytic performance of conventional CuBi₂O₄. A series of characterization has been applied to investigate properties of the obtained CuBi₂O₄ (CBO-EG3). Compared with conventional rod-like CuBi₂O₄ (CBO), the synthesized sphere-like CBO-EG3 exhibited rough surface, larger specific surface area, and more effective separation of photo-generated carriers, which overcome main shortcomings of CuBi₂O₄. The removal efficiency of typical antibiotic sulfamethazine (SMZ) reached almost 100% under the optimal experimental conditions. About 70% of SMZ could be adsorbed in 180-min dark reaction, with residual being photodegraded in 30 min. CBO-EG3 showed much higher photocatalytic efficiency than pure CBO, attributing to its highly effective photo-induced electron and hole separation. Meanwhile, substantial adsorption of pollutant on CBO-EG3 contributed vastly to removal of SMZ, photo-generated electrons and holes inclined to react with adsorbed SMZ directly, and photocatalytic process was mainly led by non-radical reaction. Elimination of SMZ in actual water samples and recycling experiment were also performed to evaluate CBO-EG3's practical application potential. This study delivered a method to promote CuBi₂O₄'s adsorptive and photocatalytic ability, which could expand the application of CuBi₂O₄ in wastewater treatment.

Journey to the Market: The Evolution of Biodegradable Drug Delivery Systems

Biodegradable polymers have been used as carriers in drug delivery systems for more than four decades. Early work used crude natural materials for particle fabrication, whereas more recent work has utilized synthetic polymers. Applications include the macroscale, the microscale, and the nanoscale. Since pioneering work in the 1960’s, an array of products that use biodegradable polymers to encapsulate the desired drug payload have been approved for human use by international regulatory agencies. The commercial success of these products has led to further research in the field aimed at bringing forward new formulation types for improved delivery of various small molecule and biologic drugs. Here, we review recent advances in the development of these materials and we provide insight on their drug delivery application. We also address payload encapsulation and drug release mechanisms from biodegradable formulations and their application in approved therapeutic products.

N-doped biochar from sewage sludge for catalytic peroxydisulfate activation toward sulfadiazine: Efficiency, mechanism, and stability

Sewage sludge-derived biochar (SBC) could remove organic contaminants in environment and reuse the sludge effectively. In this study, urea-doped SBC (NSBC) was prepared, characterized, and applied as heterogeneous catalytics to peroxydisulfate (PDS) activation. Sulfadiazine (SD), a widely used antibiotic, was used as a model pollutant to evaluate the efficiency and mechanism of this system. The degradation rate of SD increased to 100% after 4 h when 1 g/L of NSBC was added to the system with a SD concentration of 20 mg/L. In this study, it was confirmed that there were two important pathways in the degradation of SD by NSBC/PDS system: the free radical on the surface of NSBC and the nonradical (¹O₂) in the solution. The doping of N atoms makes neighboring C atoms positively charged, thereby making the direct transfer of electrons with S₂O₈^2- and the generation of ¹O₂ via nonradical pathway easy. In addition, the CO functional group formed during the pyrolysis of NSBC can produce ¹O₂ in a similar way. A total of 22 SD degradation products were identified, and 4 possible pathways were proposed. This study provide supplement for the degradation mechanism of organic compounds by carbon-based materials.

An overview on non-spherical semiconductors for heterogeneous photocatalytic degradation of organic water contaminants

Because of their carcinogenicity and mutagenicity, the elimination of organic contaminants from surface and subsurface water is a subject of environmental significance. Conventional water decontamination approaches such as membrane separation, ultrafiltration, adsorption, reverse osmosis, coagulation, etc., have relatively higher operating costs and can generate highly toxic secondary contaminants. On the other hand, heterogeneous photocatalysis, an advanced oxidation process (AOP), is considered a clean and cost-effective process for organic pollutants degradation. Owing to their distinctive structure and physicochemical properties non-spherical semiconductors have gained considerable limelight in the photocatalytic degradation of organic contaminants. The current review briefly introduces a wide range of organic water contaminants. Recent advances in non-spherical semiconductor assembly and their photocatalytic degradation applications are highlighted. The underlying mechanism, fundamentals of photocatalytic reactions, and the factors affecting the degradation performance are also alluded including the current challenges and future research perspectives.

Construction of Z-scheme g-C3N4 / MnO2 /GO ternary photocatalyst with enhanced photodegradation ability of tetracycline hydrochloride under visible light radiation

A facile wet-chemical method was adopted to synthesize g-C₃N₄/MnO₂/GO heterojunction photocatalyst for visible-light photodegradation of tetracycline hydrochloride (TC). The addition of MnO₂ and GO increased the absorption of visible light and the specific surface area of the photocatalyst. The results of photoluminescence, electrochemical impedance spectroscopy, and photocurrent response indicated that CMG-10 had the lowest electron-hole recombination probability, which was beneficial for the photocatalytic reaction. The ternary photocatalyst exhibited enhanced photoelectric performance and superior photocatalytic activity with 91.4% removal of TC (10 mg/L) under a mere 60 min visible light illumination, which showed enhanced photocatalytic degradation when compared with binary (CM, 77.95%; CG, 78.83%) and single (C₃N₄, 55.5%; MnO₂, 36.41%) photocatalysts. A pH of 6 was optimal for the CMG-10 photocatalytic degradation of TC, and the optimal photocatalyst dosage was 0.5 g/L. Common coexisting ions influenced the removal of TC by influencing the production of active species. The catalyst is stable and reusable with only a 10% reduction in removal efficiency after four cycles. According to the active species analysis, the Z-scheme mechanism was a charge transfer behavior in the composite photocatalyst, which could prevent the recombination of photogenerated carriers. This study presents a photocatalytic approach to the effective removal of TC from water bodies, which provides practical implications to advance the use of photocatalytic technology in the restoration of aqueous environmental pollution.

Synergistic adsorption-photocatalytic degradation of different antibiotics in seawater by a porous g-C3N4/calcined-LDH and its application in synthetic mariculture wastewater

In this work, a modified g-C₃N₄/MgZnAl-calcined layered double hydroxide composite (M-CN/cLDH) was successfully fabricated via a template method. The composite material is a hierarchical porous flower-like nanostructure self-assembled from stacked hybrid flakes. The 3D M-CN/cLDH architectures exhibit a synergistic effect of adsorption and photocatalysis for eliminating typical tetracycline antibiotics in seawater, i.e., oxytetracycline (OTC), tetracycline (TC), chlortetracycline (CTC), and doxycycline (DXC). The synergistic removal rate of OTC in seawater of M-CN/cLDH is 2.73 times higher than that of g-C₃N₄ after 120 min of visible-light illumination, and M-CN/cLDH also performs better adsorption-photocatalytic degradation on OTC in the continuous flow reaction process. The superior adsorption capability of the M-CN/cLDH is attributed to the open porous structures of cLDH, and its excellent photocatalytic degradation activity is ascribed to the closely bonded heterojunctions between g-C₃N₄ (CN) and cLDH double layers. The mass spectra reveals the degradation pathways of OTC, and its byproducts are less toxic after degradation for 120 min. The exploration of the M-CN/cLDH in synthetic mariculture wastewater suggested a huge potential for its practical application. With the assistance of magnesium ammonium phosphate (MAP) precipitation pretreatment, the material can effectively retain the high OTC removal rate in the synthetic mariculture wastewater circumstance.

Construction of Z-scheme NiO/NiC/g-C3N4 composites using NiC as novel cocatalysts for the efficient photocatalytic degradation

A novel composite consisting of NiO/NiC/g-C₃N₄ with excellent photocatalytic properties was successfully synthesized by the simple calcination of layered double metal hydroxide (LDH) and melamine. The color and chemical composition of the as-prepared composites could be tailored by changing the mass ratio of NiAl-LDH and g-C₃N₄. For the L4C composite at the ratio of 1 : 1, it showed the desired dark color due to the generated NiC. It also showed high photodegradation efficiency under visible light irradiation, reaching 97.5% toward Rhodamine B and 92.6% toward tetracycline. The high photodegradation efficiency could be mainly attributed to the unique formation of NiC cocatalysts coupled with g-C₃N₄ and NiO semiconductors, which constructed a Z-scheme system and facilitated the efficient separation of the photogenerated electron–hole pairs. The present findings provide a promising approach for fabricating the new types of composite photocatalysts for pollutant degradation.

A novel composite consisting of NiO/NiC/g-C₃N₄ with excellent photocatalytic properties was successfully synthesized by the simple calcination of layered double metal hydroxide (LDH) and melamine.

Layered double hydroxides and related hybrid materials for removal of pharmaceutical pollutants from water

Pharmaceuticals and their by-products are recalcitrant contaminants in water. Moreover, the high consumption of these drugs has many detrimental effects on body waters and ecosystems. In this timely review, the advances in molecular engineering of layered double hydroxides (LDH) that have been used for the removal of pharmaceutical pollutants are discussed. The approach starts from the strategies to obtain homogeneous synthesis of LDH that allow the doping and/or surface functionalization of different metals and oxides, producing heterojunction systems as well as composites with carbon and silica-based materials with high surface area. Adsorption is considered as a traditional removal of pharmaceutical pollutants, so the kinetic and mechanism of this phenomenon are analyzed based on pH, temperature, ionic strength, in order to obtain new insights for the formation of multifunctional LDH. Advanced oxidation methodologies, mainly heterogeneous photocatalysis and Fenton-like processes, stand out as the more efficient even to obtain the mineralization of the drugs. The LDH have the advantage of structural memory that favors regeneration processes. The reconstruction of calcined LDH can be used to improve drug removal, through a combination of adsorption capacity/catalytic activity. A meticulous analysis of the persistence, toxicity and bioaccumulation of the most common pharmaceuticals has allowed us to highlight the ability of the LDH to remove recalcitrant drugs at relatively low concentrations (ppm, ppb), in contrast to other mixed oxide nanostructures and homogeneous oxidation processes. In this sense, the mechanism of drug removal by LDH is discussed based on the importance of the use of composites, scavenger agents, Fenton and electro-Fenton processes, membranes, thin films and coatings, among others. In addition, the ecotoxicity of LDH is also reviewed to indicate that these layered structures can exhibit biocompatibility or high toxicity depending on the adsorbed drug and ions/metals that compose them. Undoubtedly, the LDH have a unique flexible structure with adsorption capacity and catalytic activity, facts that explain the important reasons for their extensive use in the environmental remediation of pharmaceutical pollutants from water.

One-step hydrothermal synthesis of a ternary heterojunction g-C3N4/Bi2S3/In2S3 photocatalyst and its enhanced photocatalytic performance

In recent years, photoelectrocatalysis has been one of the hotspots of research. Graphite-like carbon nitride (g-C3N4) is one of the few non-metal semiconductors known and has good potential in the field of photocatalysis due to its simple preparation method and visible light effects. In this study, a method for compounding two semiconductor materials, In2S3 and Bi2S3, on the surface of g-C3N4 via a one-step hydrothermal method is reported, and it was found that this resulting material showed remarkable properties. The advantages of this method are as follows: (1) the formation of a heterojunction, which accelerates the separation efficiency of photogenerated carriers; (2) a large number of holes and defects on the surface of g-C3N4 are conducive to the nucleation, crystallisation and growth of In2S3 and Bi2S3. Compared with its counterpart catalysts, the CN/In2S3/Bi2S3 composite catalyst has significantly improved performance. Due to its high degree of crystallinity, the adsorption capacity of the catalyst itself is also significantly improved. In addition, the stability of the composite material maintains 90.9% after four cycles of use, and the structure is not damaged. In summary, CN/Bi2S3/In2S3 composite materials are believed to have broad application potential in the treatment of dye wastewater.

Photocatalytic decontamination of tetracycline and Cr(VI) by a novel α-FeOOH/FeS2 photocatalyst: One-pot hydrothermal synthesis and Z-scheme reaction mechanism insight

Tetracycline and Cr(VI) as non-biodegradable environmental contaminants have attracted increasing attention because of their chronic toxicity. In this regard, the environmentally friendly Z-scheme photocatalytic decontamination system has been widely used for contaminant treatment. Herein, a novel 3D Z-scheme α-FeOOH/FeS₂ composite photocatalyst was successfully synthesized for the first time via a simple one-pot hydrothermal method. X-ray diffraction (XRD) and Fourier-transform infrared (FT-IR) analyses and high-resolution transmission electron microscopy (HRTEM) and X-ray photoelectron spectroscopy (XPS) demonstrated that the O component of the heterogeneous nanostructures formed by the FeOFe linkages in α-FeOOH was replaced by S to generate FeSFe linkages in the resulting FeS₂. As expected, the novel 3D Z-scheme α-FeOOH/FeS₂ composites exhibited remarkable photocatalytic activity for Cr(VI) reduction and tetracycline degradation compared to pure α-FeOOH. Photoluminesence (PL) measurement and electrochemical impedance spectroscopy (EIS), as well as density functional theory (DFT) calculations, suggested that the enhanced photocatalytic activity of the Z-scheme α-FeOOH/FeS₂ composite can be attributed to the improved photo-absorption properties and the effective separation of photo-induced charge carriers caused by the Z-scheme system of the as-prepared 3D α-FeOOH/FeS₂ composites. Thus, this work may facilitate the effective design of α-FeOOH-based photocatalysts.

Adsorption, degradation, and mineralization of emerging pollutants (pharmaceuticals and agrochemicals) by nanostructures: a comprehensive review

This review discusses a fresh pool of research findings reported on the multiple roles played by metal-based, magnetic, graphene-type, chitosan-derived, and sonicated nanoparticles in the treatment of pharmaceutical- and agrochemical-contaminated waters. Some main points from this review are as follows: (i) there is an extensive number of nanoparticles with diverse physicochemical and morphological properties which have been synthesized and then assessed in their respective roles in the degradation and mineralization of many pharmaceuticals and agrochemicals, (ii) the exceptional removal efficiencies of graphene-based nanomaterials for different pharmaceuticals and agrochemicals molecules support arguably well a high potential of these nanomaterials for futuristic applications in remediating water pollution issues, (iii) the need for specific surface modifications and functionalization of parent nanostructures and the design of economically feasible production methods of such tunable nanomaterials tend to hinder their widespread applicability at this stage, (iv) supplementary research is also required to comprehensively elucidate the life cycle ecotoxicity characteristics and behaviors of each type of engineered nanostructures seeded for remediation of pharmaceuticals and agrochemicals in real contaminated media, and last but not the least, (v) real wastewaters are extremely complex in composition due to the mix of inorganic and organic species in different concentrations, and the presence of such mixed species have different radical scavenging effects on the sonocatalytic degradation and mineralization of pharmaceuticals and agrochemicals. Moreover, the formulation of viable full-scale implementation strategies and reactor configurations which can use multifunctional nanostructures for the effective remediation of pharmaceuticals and agrochemicals remains a major area of further research.

Accelerated Redox Cycles of Fe(III)/Fe(II) and Cu(III)/Cu(II) by Photo-Induced Electron from N-CQDs for Enhanced Photo-Fenton Capability of CuFe-LDH

Layered double hydroxide (LDH) materials have shown charming photo-Fenton capability for the treatment of refractory organic wastewater. In this study, CuFe-LDH hybridized with N-doped carbon quantum dots (N-CQDs) was investigated to further enhance the photo-Fenton capability. The results showed that the assembly techniques of coprecipitation and the hydrothermal method could synthesize the target material, CuFe-LDH/N-CQDs, successfully. CuFe-LDH/N-CQDs could possess a 13.5% higher methylene blue (MB) removal rate than CuFe-LDH in 30 min due to the accelerated redox cycles of Fe(III)/Fe(II) and Cu(III)/Cu(II), resulting from the photo-induced electron transfer from N-CQDs to CuFe-LDH via a d–π conjugation electronic bridge. Moreover, CuFe-LDH/N-CQDs has excellent photo-Fenton capability in the pH range of 2–11, even after being reused five times. This study would provide an efficient and stable photo-Fenton catalyst for the treatment of refractory organic wastewater.

Photodecomposition of ibuprofen over g-C3N4/Bi2WO6/rGO heterostructured composites under visible/solar light

A microwave-assisted hydrothermal preparation of heterostructured graphitic carbon nitride/bismuth tungsten oxide/reduced graphene oxide nanocomposites (denoted as GBR-T, T = microwave irradiation time) is performed. The prepared GBR-T photocatalysts are identified by employing X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), scanning electron microscopy (SEM), high-resolution transmission electron microscopy (HRTEM), time-resolved photoluminescence (TRPL) and nitrogen adsorption-desorption isotherms. The photocatalytic performance of these GBR-T is evaluated by the photocatalytic degradation of ibuprofen (IBP) under the visible light (λ > 420 nm) and solar light irradiation. Among all prepared photocatalysts, ca. 93% of IBP photodegradation can be achieved with a degradation rate constant (k) of 0.011 min^-1 under visible-light irradiation upon the optimal microwave-assisted reaction time of 60 min. The improvement is primarily attributable to the higher crystallization degree, specific surface area and increased charge transfer efficiency as verified by XRD, nitrogen adsorption-desorption isotherms and TRPL, respectively. The photocatalytic performance of this catalyst is further enhanced in the photodecomposition of IBP (ca. 98.6%) under sun light irradiation. The electron spin resonance (ESR) and liquid chromatography-mass/mass spectrometry (LC-MS/MS) studies show that the superoxide radicals and hydroxyl radicals are the dominant active species in the photocomposition of IBP and degradation intermediates are formed through three probable photodegradation pathways. This investigation provides a simple way to prepare triple 2D heterojuction photocatalysts which could be effectively used in the advanced oxidation process for removal of emerging contaminants in wastewater by using renewable energy.

Mesoporous TiO2/g-C3N4 composites with O-Ti-N bridge for improved visible-light photodegradation of enrofloxacin

g-C₃N₄ makes good prospects in photocatalytic field due to its two-dimensional (2D) structure and visible-light activity. How to improve its photocatalytic activity by minimizing the unexpected recombination of photo-induced charge carries on g-C₃N₄ motivates our research. Herein, mesoporous TiO₂/g-C₃N₄ composites are fabricated with 2D TiO₂(B) nanosheets regulating thermal condensation process of g-C₃N₄ nanosheets. FT-IR and XPS results suggest that the formation of O-Ti-N chemical bond increases the percentage of N-(C)³ in the conjugated system, accelerating the transportation of photo-induced electrons. The optical property and PL results illustrate that the formed interface heterojunction with chemical bond facilitates the separation and transfer of photo-induced charge carriers. Hence, the removal constant of TiO₂/g-C₃N₄ composites is 46.3 times higher than that of g-C₃N₄. This study opens up a new insight into the development of composite materials in the field of organic pollutant treatment.

The synergistic effect of Ag/AgCl@ZIF-8 modified g-C3N4 composite and peroxymonosulfate for the enhanced visible-light photocatalytic degradation of levofloxacin

In this work, a series of Ag/AgCl@ZIF-8 modified g-C₃N₄ composites were synthesized and used to degrade levofloxacin (LVFX) in water under visible light irradiation with the assistant of peroxymonosulfate (PMS). The morphologies and physicochemical properties of the materials were characterized by SEM, TEM, XRD, XPS, FTIR, and DRS technologies. The results of photocatalytic experiments showed that in the presence of PMS, the degradation rate of LVFX reached 87.3% in 60min. Furthermore, factors affecting photocatalytic efficiency such as the concentration of PMS, photocatalyst dosage and different pH values were investigated. The degradation products of LVFX were analyzed by LC-MS and the degradation pathway was inferred. Active species trapping experiments indicated that O₂^-, h⁺ and SO₄^- played important roles in the degradation process in the presence of PMS and the possible degradation mechanism was put forward. This work provides a photocatalyst system that is beneficial to the separation of photogenerated carriers and demonstrates the great potential of PMS-assisted photocatalysis in the purification of organic pollutants.

Powerful combination of g-C3N4 and LDHs for enhanced photocatalytic performance: A review of strategy, synthesis, and applications

The utilization of solar energy with photocatalytic technology has been considered a good solution to alleviate environmental pollution and energy shortage. Constructing 2D/2D heterostructure photocatalysts with layered double hydroxide (LDH) and graphitic carbon nitride (g-C₃N₄) is an effective approach to attain high performance in solar photocatalysis. This paper provides a review of recent studies about 2D/2D LDH/g-C₃N₄ heterostructure photocatalysts. Main strategies for constructing the desired 2D/2D heterojunction are summarized. The planar structure of LDH and g-C₃N₄ offers a shorter transfer distance for charge carriers and reduces electron-hole recombination in the bulk phase. The face-to-face contact between the two materials can promote the charge transfer across the heterostructure interface, thus improving the electron-hole separation efficiency. The performance and mechanisms of LDH/g-C₃N₄ photocatalysts in hydrogen production, CO₂ reduction, and organic pollutant degradation are analyzed and discussed. Incorporating reduced graphene oxide or Ag nanoparticles into LDH/g-C₃N₄ heterojunction and fabricating calcined LDH/g-C₃N₄ composites are effective strategies to further facilitate charge transfer at the interface of LDH and g-C₃N₄ and improve the absorption capacity for visible light. This review is expected to provide basic insights into the design of 2D/2D LDH/g-C₃N₄ heterojunctions and their applications in solar photocatalysis.

The effective photocatalysis and antibacterial properties of AgBr/Ag2MoO4@ZnO composites under visible light irradiation

A novel Z-scheme AgBr/Ag₂MoO₄@ZnO photocatalyst was fabricated via a hydrothermal process and in situ growth method. X-ray powder diffraction, scanning electron microscopy and transmission electron microscopy were used to determine the structure of the photocatalyst. The results showed that the composites were tightly connected by the (101) lattice plane of ZnO, the (222) plane of Ag₂MoO₄ and the (200) lattice plane of AgBr. Because of the strong redox activity and good separability of photoelectrons and holes induced by the Z-scheme structure, the photodegradation rate for ciprofloxacin (CIP) solution was 80.5% by the photocatalysis of 0.5 AgBr/Ag₂MoO₄@ZnO. In addition, more than 99.999% of Escherichia coli, Staphylococcus aureus, and Pseudomonas aeruginosa cells were killed within 60 min. These results demonstrate that AgBr/Ag₂MoO₄@ZnO is a promising photocatalyst, which can be used in organic pollutant degradation and the photocatalytic antibacterial area.

Hybridization of Nanodiamond and CuFe-LDH as Heterogeneous Photoactivator for Visible-Light Driven Photo-Fenton Reaction: Photocatalytic Activity and Mechanism

Establishing a heterojunction for two kinds of semiconductor catalysts is a promising way to enhance photocatalytic activity. In this study, nanodiamond (ND) and CuFe-layered double hydroxide (LDH) were hybridized by a simple coprecipitation method as a novel heterojunction to photoactivate H2O2. The ND/LDH possessed a hydrotalcite-like structure, large specific surface area (SBET = 99.16 m2/g), strong absorption of visible-light and low band gap (Eg = 0.94 eV). Under the conditions of ND/LDH dosage 0.0667 g/L, H2O2 concentration 19.6 mmol/L, and without initial pH adjustment, 93.5% of 10 mg/L methylene blue (MB) was degraded within 120 minutes, while only 78.3% of MB was degraded in the presence of LDH instead of ND/LDH. The ND/LDH exhibited excellent stability and maintained relatively high activity, sufficient to photoactivate H2O2 even after five recycles. The mechanism study revealed that in the heterojunction of ND/LDH, the photoelectrons transferred from the valence band of LDH (Cu/Fe 3d t2g) to the conduction band of LDH (Cu/Fe 3d eg) could spontaneously migrate onto the conduction band of ND, promoting the separation of photo-induced charges. Thus, the photoelectrons had sufficient time to accelerate the redox cycles of Cu3+/Cu2+ and Fe3+/Fe2+ to photoactivate H2O2 to produce hydroxyl radicals, resulting in excellent photo-Fenton efficiency on MB degradation.