Dermal bioaccessibility of plasticizers in indoor dust and clothing

Phthalate esters in clothing: A review

Phthalate esters (PAEs) are widely used as plasticizers to enhance the flexibility and durability of different consumer products, including clothing. However, concerns have been raised about the potential adverse health effects associated with the presence of phthalates in textiles, such as endocrine disruption, reproductive toxicity and potential carcinogenicity. Based on examination of more than 120 published articles, this paper presents a comprehensive review of studies concerning the phthalate content in clothing and other textile products, with special emphasis on those conducted in the last decade (2014-2023). The types and role of PAEs as plasticizers, the relevant legislation in different countries (emphasizing the importance of monitoring PAE levels in clothing to protect consumer health) and the analytical methods used for PAE determination are critically evaluated. The review also discusses the models used to evaluate exposure to PAEs and the associated health risks. Finally, the study limitations and challenges related to determining the phthalate contents of textile products are considered.

Endocrine disrupting chemicals in children's and their parents' urine: Is the exposure related to the Chinese and Western lifestyle?

Children are known to be more vulnerable to exposure to endocrine-disrupting chemicals (EDCs) compared to adults, but evaluating the exposure pathways can be challenging. This research employed target and non-target analysis (NTA) to examine the exposure characteristics of EDCs in spot urine samples collected from 46 children's (aged 3-12 years) and their parents in Hong Kong (Chinese/Western lifestyle) and Guangzhou (mainly Chinese lifestyle). The results revealed that the geometric mean concentrations of phthalate esters metabolites (mPAEs) and bisphenols (BPs) in children's urine were 127.3 μg/gcrea and 2.5 μg/gcrea in Guangzhou, and 93.7 μg/gcrea and 2.9 μg/gcrea in Hong Kong, respectively, which were consistent with global levels. NTA identified a total of 1069 compounds, including 106 EDCs, commonly detected in food, cosmetics, and drugs. Notable regional differences were observed between Guangzhou and Hong Kong with potential sources of EDCs including dietary and cosmetic additives, toys, flooring and dust, as well as differences in lifestyles, diet, and living environment. However, age was found to significantly impact EDC exposure. The quantified EDCs (mPAEs and BPs) posed possible health risks to 60% of the children. Moreover, the presence of caffeine in children's urine, which exhibited higher detection rates in children from Hong Kong (95.6%) and Guangzhou (44.4%), warrants further attention. The sources of EDCs exposure in these regions need to be fully confirmed.

Dermal bioaccessibility of perfluoroalkyl substances from household dust; influence of topically applied cosmetics

PFAS are known contaminants of indoor dust. Despite the adherence of such dust to skin, the dermal penetration potential of PFAS is not well understood. By applying in vitro physiologically based extraction tests, the bioaccessibility of 17 PFAS from indoor dust to synthetic human sweat sebum mixtures (SSSM) was assessed. The composition of the SSSM substantially impacted the bioaccessibility of all target compounds. PFAS bioaccessibility in a 1:1 sweat:sebum mixture ranged from 54 to 92% for perfluorocarboxylic acids (PFCAs) and 61-77% for perfluorosulfonic acids (PFSAs). Commonly applied cosmetics (foundation, sunscreen, moisturiser, and deodorant) significantly impacted the dermal bioaccessibility of target PFAS, e.g., the presence of moisturiser significantly decreased the total bioaccessibility of both PFCAs and PFSAs. Preliminary human exposure estimates revealed dermal contact with indoor dust could contribute as much as pathways such as drinking water and dust ingestion to an adult's daily intake of PFAS. While further research is needed to assess the percutaneous penetration of PFAS in humans, the current study highlights the potential substantial contribution of dermal exposure to human body burdens of PFAS and the need for further consideration of this pathway in PFAS risk assessment studies.

Short- and medium-chain chlorinated paraffins in T-shirts and socks

The short- and medium-chain chlorinated paraffins (SCCPs and MCCPs) are complex mixtures of persistent compounds used mainly as plastic additives. They can have a negative impact on human health as they are suspected of disrupting the endocrine system and being carcinogenic, which is why monitoring their presence in the human environment is desirable. Clothing was selected for this study because they are produced in large quantities worldwide and the final products are worn for long periods throughout the day, in direct contact with human skin. The concentrations of CPs in this type of sample have not been sufficiently reported. We determined SCCPs and MCCPs in 28 samples of T-shirts and socks by gas chromatography coupled with high-resolution mass spectrometry in negative chemical ionisation mode (GC-NCI-HRMS). CPs were found above the limits of quantification in all samples, with concentrations ranging from 33.9 to 5940 ng/g (mean 1260 ng/g, median 417 ng/g). The samples with a substantial proportion of synthetic fibres contained higher CP concentrations (22 times higher mean for SCCPs and 7 times higher mean for MCCPs) than garments composed exclusively of cotton. Finally, the effect of washing in the washing machine was investigated. The individual samples behaved differently: (i) excessively emitting CPs; (ii) being contaminated; (iii) retaining the original CP levels. The CP profiles also changed for some samples (with a substantial proportion of synthetic fibres and samples composed exclusively of cotton).

Enhanced migration of plasticizers from polyvinyl chloride consumer products through artificial sebum

In the present study, the migration of plasticizers from modeled and commercial polyvinyl chloride (mPVC and cPVC, respectively) to poly(dimethylsiloxane) via artificial sebum was assessed to mimic the dermal migration of plasticizers. In addition, the various factors affecting migration of phthalic acid esters (PAEs) from diverse PVC products were investigated. The migrated mass and migration ratio of PAEs increased but the migration rate decreased over time. The migration rate increased with sebum mass, contact time, and temperature but decreased under higher pressure. Low-molecular-weight PAEs (dimethyl phthalate and diethyl phthalate) migrated in higher amounts than high-molecular-weight PAEs (dicyclohexyl phthalate [DCHP] and diisononyl phthalate [DINP]). Diffusion of all PAEs in mPVC increased with temperature, with diffusion coefficients ranging from 10^-13 to 10^-15, 10^-12 to 10^-14, and 10^-10 to 10^-12 cm²·s^-1 at 25 °C, 40 °C, and 60 °C, respectively; the enthalpy of activation ranged between 127 and 194 kJ·mol^-1. Moreover, migration depended on total PAE content of the product, as the diffusion coefficient for DINP in cPVC (softer PVC) was approximately three orders of magnitude higher than that for DINP in mPVC (harder PVC); this may be due to the increase in free volume with increasing plasticizer content. Finally, the daily exposure doses of the plasticizers were estimated. These findings will be helpful for estimating dermal exposure risk.

Disposable Polypropylene Face Masks: A Potential Source of Micro/Nanoparticles and Organic Contaminates in Humans

We have been effectively protected by disposable propylene face masks during the COVID-19 pandemic; however, they may pose health risks due to the release of fine particles and chemicals. We measured micro/nanoparticles and organic chemicals in disposable medical masks, surgical masks, and (K)N95 respirators. In the breathing-simulation experiment, no notable differences were found in the total number of particles among mask types or between breathing intensities. However, when considering subranges, <2.5 μm particles accounted for ∼90% of the total number of micro/nanoparticles. GC-HRMS-based suspect screening tentatively revealed 79 (semi)volatile organic compounds in masks, with 18 being detected in ≥80% of samples and 44 in ≤20% of samples. Three synthetic phenolic antioxidants were quantified, and AO168 reached a median concentration of 2968 ng/g. By screening particles collected from bulk mask fabrics, we detected 18 chemicals, including four commonly detected in masks, suggesting chemical partition between the particles and the fabric fibers and chemical exposure via particle inhalation. These particles and chemicals are believed to originate from raw materials, intentionally and nonintentionally added substances in mask production, and their transformation products. This study highlights the need to study the long-term health risks associated with mask wearing and raises concerns over mask quality control.

Development of human dermal PBPK models for the bisphenols BPA, BPS, BPF, and BPAF with parallel-layered skin compartment: Basing on dermal administration studies in humans

Risk assessment of human exposure to bisphenols (BPs) including bisphenol A, S, F and AF (BPA, BPS, BPF and BPAF) have suggested that except for ingestion, health risk resulting from dermal contact is not negligible. However, the absorption kinetics of BPA substitutes in humans following dermal exposure have been poorly studied. This study aimed to address the knowledge gap in physiologically based pharmacokinetic (PBPK) modeling of BPA and its high-concerned substitutes (BPS, BPF and BPAF) following dermal administration. Parallel-layered skin compartmental model for dermal absorption of BPs was for the first time proposed and human dermal administration studies were conducted to determine dermal bio-accessibility of BPS from thermal paper (TP) (n = 4), BPF (n = 4) and BPAF (n = 5) from personal care products (PCPs). Further, pharmacokinetics of BPS and its metabolites following human handling TP were investigated and the dermal PBPK models for BPA and BPS were validated using the available human biomonitoring data. Overall, 28.03 % ± 13.76 % of BPS in TP was transferred to fingers followed by absorption of 96.17 % ± 2.78 % of that. The dermal bio-accessibilities of BPs in PCPs were 31.65 % ± 2.90 % for BPF and 12.49 % ± 1.66 % for BPAF. Monte Carlo analysis indicated that 90 % of the predicted variability fell within one order of magnitude, which suggested that the developed PBPK models had medium uncertainty. Global sensitivity analysis revealed that the model uncertainty is mainly attributed to the variabilities of dermal absorption parameters. Compared with the previous models for BPs, the developed dermal PBPK models were capable of more accurate predictions of the internal dose metric in target organs following human dermal exposure to BPs via TP and PCPs routes. These results suggested that the developed human dermal PBPK models would provide an alternative tool for assessing the risk of human exposure to BPs through dermal absorption.

Characterizing the obesogenic and fatty liver-inducing effects of Acetyl tributyl citrate (ATBC) plasticizer using both in vivo and in vitro models

The global incidence of obesity and non-alcoholic fatty liver disease (NAFLD) is rising rapidly in recent years. Environmental factors including usage of plastics and exposure to chemicals have been proposed as important contributors to the obesity pandemic. Acetyl tributyl citrate (ATBC) is a non-phthalate plasticizer widely used in food packaging, personal care products, medical devices and children's toys etc. Due to its high leakage rate from plastics, exposure risk of ATBC keeps increasing. Although there are some studies investigating the safety of ATBC on human health, these studies mainly focused on high dosages and information regarding ATBC safety at environmental-relevant low levels is still limited. In this study, we aimed to evaluate the safety of subchronic exposure to environmentally-relevant concentrations of ATBC. C57BL/6J mice were orally exposed to ATBC for 6 or 14 weeks. Results indicated that ATBC exposure increased the body weight gain, the body fat content and the size of adipocytes, induced liver steatosis in mice. Consistent with in vivo effects, ATBC treatment increased the intracellular lipid accumulation in vitro hepatocytes. Transcriptome sequencing, qRT-PCR analysis and western blotting revealed that ATBC exposure affected the expression of genes involved in de novo lipogenesis and lipid uptake. Therefore, based on our subchronic and in vitro results, it suggested that ATBC might be a potential environmental obesogen with metabolism-disturbing and fatty liver-inducing risk, and its application in many consumer products should be carefully re-evaluated.

Occurrence and seasonal variation of plasticizers in sediments and biota from the coast of Mahdia, Tunisia

Plasticizers are compounds often involved in the manufacturing of plastic products. Nevertheless, the ageing of the latter generates plasticizers that generally end up in the marine environment. In fact, marine pollution by phthalate acid esters (PAEs) and their alternatives has become an environmental and health issue of serious concern, as they are largely and ubiquitously present in the environment and aquatic organisms. In the present study, four PAEs, such as diethyl phthalate (DEP), diisobutyl phthalate (DiBP), dibutyl phthalate (DBP), and di(2-ethylhexyl) phthalate (DEHP), and one non-phthalate plasticizer (NPP), namely di-2-ethylhexyl terephthalate (DEHT), are wanted in different marine compartments from the coast of Mahdia in Tunisia such as sediment, seagrass, and mussel. The most abundant and frequently detected congener was DEHT at the concentrations reached 1.181 mg/kg in the sediment, 1.121 mg/kg in the seagrass, and 1.86 mg/kg in the mussel. This result indicates that the DEHT could emerge through the food chain and therefore bioaccumulate in marine compartments. In addition, we noticed that the seasonal variations of plasticizers were seriously affected by environmental factors including industrial and urban discharges.

Effects of time, temperature, and sebum layer on migration rate of plasticizers in polyvinyl chloride products

Large amounts of plasticizers, such as di(2-ethylhexyl) phthalate (DEHP) and dioctyl terephthalate (DOTP), are added to various polyvinyl chloride (PVC) products. To assess the human exposure to these plasticizers on using PVC products, it is important to know their migration rate. However, conventional migration tests conducted at a fixed time and temperature are often insufficient for determining possible variations in migration rates with respect to time, temperature, and sebum layer. In this study, the migration rates of DEHP and DOTP from five PVC products were measured using a polydimethylsiloxane (PDMS) sampler at different times and temperatures, in the presence and absence of artificial sebum. Although the migrated mass of the plasticizers increased over time, the average migration rate decreased. The average migration rates increased with increasing temperature and in the presence of an artificial sebum layer between the product and the PDMS sampler. When the artificial sebum layer was added, the average migration rate increased considerably by a factor of 1.5-14, suggesting that sebum should be considered to avoid the underestimation of dermal exposure to highly hydrophobic plasticizers, such as DEHP and DOTP. Based on the measured values, a conceptual analysis was conducted to quantitatively assess the difference in the migration rate of plasticizers caused by the difference between the time set for the migration test and the exposure time when the product is used. To reduce uncertainties and the potential underestimation of dermal exposure, an appropriate time for the experiment should be set to simulate the exposure scenario of a given product.

Human skin responses to environmental pollutants: A review of current scientific models

Whatever the exposure route, chemical, physical and biological pollutants modify the whole organism response, leading to nerve, cardiac, respiratory, reproductive, and skin system pathologies. Skin acts as a barrier for preventing pollutant modifications. This review aims to present the available scientific models, which help investigate the impact of pollution on the skin. The research question was "Which experimental models illustrate the impact of pollution on the skin in humans?" The review covered a period of 10 years following a PECO statement on in vitro, ex vivo, in vivo and in silico models. Of 582 retrieved articles, 118 articles were eligible. In oral and inhalation routes, dermal exposure had an important impact at both local and systemic levels. Healthy skin models included primary cells, cell lines, co-cultures, reconstructed human epidermis, and skin explants. In silico models estimated skin exposure and permeability. All pollutants affected the skin by altering elasticity, thickness, the structure of epidermal barrier strength, and dermal extracellular integrity. Some specific models concerned wound healing or the skin aging process. Underlying mechanisms were an exacerbated inflammatory skin reaction with the modulation of several cytokines and oxidative stress responses, ending with apoptosis. Pathological skin models revealed the consequences of environmental pollutants on psoriasis, atopic dermatitis, and tumour development. Finally, scientific models were used for evaluating the safety and efficacy of potential skin formulations in preventing the skin aging process or skin irritation after repeated contact. The review gives an overview of scientific skin models used to assess the effects of pollutants. Chemical and physical pollutants were mainly represented while biological contaminants were little studied. In future developments, cell hypoxia and microbiota models may be considered as more representative of clinical situations. Models considering humidity and temperature variations may reflect the impact of these changes.

Exposure to Contemporary and Emerging Chemicals in Commerce among Pregnant Women in the United States: The Environmental influences on Child Health Outcome (ECHO) Program

Prenatal chemical exposures can influence maternal and child health; however, few industrial chemicals are routinely biomonitored. We assessed an extensive panel of contemporary and emerging chemicals in 171 pregnant women across the United States (U.S.) and Puerto Rico in the Environmental influences on Child Health Outcomes (ECHO) Program. We simultaneously measured urinary concentrations of 89 analytes (103 total chemicals representing 73 parent compounds) in nine chemical groups: bactericides, benzophenones, bisphenols, fungicides and herbicides, insecticides, organophosphate esters (OPEs), parabens, phthalates/alternative plasticizers, and polycyclic aromatic hydrocarbons (PAHs). We estimated associations of creatinine-adjusted concentrations with sociodemographic and specimen characteristics. Among our diverse prenatal population (60% non-Hispanic Black or Hispanic), we detected 73 of 89 analytes in ≥1 participant and 36 in >50% of participants. Five analytes not currently included in the U.S. biomonitoring were detected in ≥90% of samples: benzophenone-1, thiamethoxam, mono-2-(propyl-6-carboxy-hexyl) phthalate, monocarboxy isooctyl phthalate, and monohydroxy-iso-decyl phthalate. Many analyte concentrations were higher among women of Hispanic ethnicity compared to those of non-Hispanic White women. Concentrations of certain chemicals decreased with the calendar year, whereas concentrations of their replacements increased. Our largest study to date identified widespread exposures to prevalent and understudied chemicals in a diverse sample of pregnant women in the U.S.

Development of an in vitro model to simulate migration of organic contaminants from pad products to human sweat and enhance dermal exposure risk assessment

Dermal sorption is an important route for human exposure to organic chemicals embedded in consumer products, but the related chemical migration from consumer products to sweats was often overlooked in assessing skin exposure risk. To address this issue, the present study selected polycyclic aromatic hydrocarbons (PAHs), phthalic acid esters (PAEs), and benzothiazoles (BTs) as the target compounds and developed an in vitro simulation model with two artificial sweats (i.e., acidic and alkaline), a sorbent, and a PVC standard material. An appropriate biological inhibitor (ampicillin) and incubation time of 20 d for assessing the maximum migration efficiency of chemicals were selected. The mass balance of the target compounds during the in vitro incubation was verified. The established in vitro simulation model was used to determine the migration ratios of PAEs and BTs in three types of mouse pads. The maximum migration ratios of DBP, DIBP, DEHP, and BT from leather pad to both sweats were less than those for silicone and rubber pads. Key controlling parameters in migration ratios should be examined in subsequent investigations. Risk assessment showed that the daily exposure doses of PAEs and BTs in mouse pads were higher than the literature data. The hazard index of PAEs in leather pad exceed 1, indicating that PAEs could induce non-carcinogenic effects to human health through hand contact. Overall, the established in vitro simulation model provides a feasible alternative for assessing the potential risk for dermal exposure to consumer products.

Identifying Citric Acid Esters, a Class of Phthalate Substitute Plasticizers, in Indoor Dust via an Integrated Target, Suspect, and Characteristic Fragment-Dependent Screening Strategy

Citrate acid esters (CAEs) have been proposed as a class of phthalate substitute plasticizers; however, information on their occurrence in indoor environments is rare. By using liquid chromatography coupled with a quadrupole-Orbitrap mass spectrometer, we developed an integrated strategy that can be applied for target, suspect, and characteristic fragment-dependent screening of CAEs. In n = 50 indoor dust samples collected from Nanjing City (China), three CAEs, namely, acetyl tributyl citrate (ATBC; mean: 412,000 ng/g), tributyl citrate (TBC, 11,600 ng/g), and triethyl citrate (TEC, 10,900 ng/g), exhibited the greatest contamination levels. Total concentrations of CAEs (∑₈CAEs) were statistically significantly (p < 0.01) greater than those of common organophosphate triesters (OPTEs), a class of ubiquitous contaminants in dust. Suspect and characteristic fragment-dependent screening (m/z 111.0078 ([C₅H₃O₃]⁺) and m/z 129.0181 ([C₅H₅O₄]⁺)) of CAEs were further conducted for the same batch of samples. We tentatively identified six novel CAEs, and the most frequent and abundant CAE was fully identified as tributyl aconitate (TBA). Statistically significant correlation relationships were observed on dust levels between TBA vs ATBC (r = 0.650; p < 0.01) and TBA vs TBC (r = 0.384; p < 0.01), suggesting their similar sources in dust samples.

Extraction With Sweat-Sebum Emulsion as a New Test Method for Leachables in Patch-Based Medical Devices, Illustrated by Assessment of Isobornylacrylate (IBOA) in Diabetes Products

BACKGROUND

The increasing offering of patch-based medical devices is accompanied by growing numbers of reported adverse skin reactions. Procedures for testing leachables according to ISO 10993 may not be optimal for lipophilic substances that can be mobilized on skin by sweat and sebum. We propose an improved extraction method for targeted analysis of leachables using low volumes of a sweat-sebum emulsion. The approach is illustrated by the analysis of isobornylacrylate (IBOA), a compound found in some devices and suspected for allergenic potential.

METHOD

Three patch-based products were tested: an implantable device for continuous glucose monitoring (CGM), an intermittently scanned CGM (isCGM) device, and a micro-insulin pump. Quantification of IBOA was performed by gas chromatography and allergenic potential of IBOA levels was assessed by the KeratinoSens cell assay. Different combinations were used for extraction solvent (isopropanol, 5% ethanol-water solution, and sweat-sebum emulsion), extraction volumes (complete immersion vs partial immersion in 2 mm of solvent), and extraction time (3, 5, and 14 days).

RESULTS

Isobornylacrylate was only found in the isCGM device. About 20 mg/L IBOA were eluted after 3 days in isopropanol but only about 1 mg/L in ethanol-water. Sweat-sebum emulsion dissolves IBOA better and gives a more stable solution than ethanol-water. Decomposition of IBOA solutions requires adjusted extraction timing or correction of results. In the sweat-sebum extract, IBOA levels were about 20 mg/L after 3 days and about 30 mg/L after 5 days, clearly above the threshold found in the KerationSens assay for keratinocyte activation (10 mg/L).

CONCLUSION

Extraction by low volumes of sweat-sebum emulsion can be a superior alternative for the targeted simulating-use assessment of leachables in patch-based medical devices.

Phthalate exposure and semen quality in infertile male population from Tianjin, China: Associations and potential mediation by reproductive hormones

Global decline in male fertility and their associations with ubiquitous exposure of phthalates (PAEs) have raised public concerns. However, the current epidemiological data are limited and controversial. Hence, we investigated possible associations between PAE exposure and male infertility. Eleven phthalate metabolites (mPAEs) were determined in urine and serum samples collected from eighty-eight males diagnosed with infertility from Tianjin, China. The median serum levels of mPAE were n.d. -3.63 ng/mL, which were 1-2 orders of magnitude lower than the urinary levels of n.d. -192 ng/mL. Negative associations were identified between urinary follicle-stimulating hormone (FSH) and MiBP and serum MCMHP, as well as testosterone (T) and luteinizing hormone (LH) and the molar concentrations of ∑mPAE, while positive association was found between T and the serum molar concentrations of ∑mDEHP. Positive associations were found between the molar concentrations of serum ∑mPAE and sperm concentration, sperm motility rate, and progressive motility, between mono (2-ethyl-5-carboxypentyl) phthalate (MECPP) and semen volume and total sperm number, and between MCMHP and progressive motility, while negative association was found between mono(2-ethyl-5-oxohexyl) phthalate (MEOHP) and progressive motility. Moreover, FSH was found to mediate the association between serum concentrations of MCMHP and progressive motility (mediation ratio = 41.6%), and LH to mediate the associations between serum concentrations of ∑mPAE and sperm concentration (mediation ratio = 45.7%) and sperm motility rate (mediation ratio = 29.0%). These results also suggested that serum levels of mPAE are a good predictor for male infertility. Further efforts need to be made on toxicological studies to systematically elaborate the internal mechanisms.

Phthalate Plasticizers in Children's Products and Estimation of Exposure: Importance of Migration Rate

Plasticizers are added to diverse consumer products including children's products. Owing to their potential for endocrine disruption, the use of phthalate plasticizers is restricted in many children's products. In this study, exposure to five phthalate esters (dibutylphthalate, di(2-ethylhexyl) phthalate (DEHP), diethyl phthalate, di-isobutyl phthalate, and diisononyl phthalate (DINP)) and an alternative (di-ethylhexyl adipate) was assessed by the use of children's products based on chemical analysis of 3345 products purchased during 2017 and 2019 in Korea. Plasticizers were found above the detection limits in 387 products, and DEHP and DINP were the two most predominantly detected plasticizers. Deterministic and probabilistic estimation of the margin of exposure at a screening level revealed that the use of children's products might be an important risk factor. However, it is also highly likely that the exposure could be overestimated, because the migration rate was estimated based solely on the content of plasticizers in children's products. Chemical migration is a key process determining the absorption of plasticizers from products; thus, further refinements in experimental determination or model estimation of the migration rate are required.

Dermal bioaccessibility and absorption of polycyclic aromatic hydrocarbons (PAHs) in indoor dust and its implication in risk assessment

Numerous studies have focused on assessing the risk of human exposure to polycyclic aromatic hydrocarbons (PAHs) in indoor dust via dermal contact. However, the dermal bioaccessibility and dermal absorption of PAHs in indoor dust have seldom been reported. In the present study, the effects of temperature, sweat ratio, solid-liquid ratio and incubation time on the dermal bioaccessibility of PAHs were examined. Naphthalene, phenanthrene, pyrene and benzo[a]pyrenewere selected for examination in an absorption assay with keratinocyte cells. The results showed the release of PAHs from indoor dust fitted a first-order one-compartment model. Naphthalene had the highest rate of release, which was consistent with the bioaccessibility assay results. In addition, the absorption rate of naphthalene and phenanthrene by keratinocytes was higher than that of pyrene and benzo[a]pyrene, with the latter being of higher molecular weight. These results indicated that low molecular weight PAHs were much more easily absorbed via dermal contact than were high molecular weight PAHs. The dermal bioavailability of PAHs in indoor dust was estimated by multiplying the bioaccessibility of PAHs in indoor dust by the ratio of dermal absorption by skin cells, and ranged from 0.12 to 51.0%. These data will be useful in risk assessments.

Percutaneous Penetration and Metabolism of Plasticizers by Skin Cells and Its Implication in Dermal Exposure to Plasticizers by Skin Wipes

Numerous studies focused on the human exposure to plasticizers via dermal contact; however, the percutaneous penetration of plasticizers was seldom considered in exposure assessment. In the present study, skin wipes of palms, back-of-hands, and forehead were collected from 114 participants (ages: 18-27). There was no significant difference between the levels of phthalates from palms and back-of-hand, while all phthalates collected from the forehead were significantly higher than those from palms and back-of-hand (p < 0.001); di(2-ethylhexyl)phthalate levels were substantially higher than other detected phthalates followed by di(n-butyl)phthalate and di(isobutyl)phthalate (DiBP), and for alternative plasticizers, bis-2-ethylhexyl terephthalate levels were substantially higher than acetyltributyl citrate and bis-2-ethylhexyladipate. Skin permeation and metabolism of phthalates was assessed using human skin equivalent models. The permeability coefficient (k_p) values of phthalates were significantly negatively correlated with their log octanol-water partition coefficient (log K_ow), while a significantly positive correlation was found between the log K_ow and the cumulative amounts of phthalates in the cells. The proportion of phthalate intake via dermal exposure to skin wipes ranges from 1.3% (for dimethyl phthalate) to 8.6% (for DiBP) and suggests that dermal absorption is a significant route for adult phthalate exposure.

A Method Validation for Simultaneous Determination of Phthalates and Bisphenol A Released from Plastic Water Containers

Phthalates (or phthalate esters, PAEs) and bisphenol A (BPA) are widely used in various industries, particularly in the fields of cosmetics and packaging, and they increase the malleability and workability of materials. As a result of their use, some international health organizations have begun to study them. In this study, the authors developed a methodology for the simultaneous determination of dimethyl phthalate (DMP), diethyl phthalate (DEP), diisobutyl phthalate (DiBP); dibutyl phthalate (DBP), bis(2-ethylhexyl) phthalate (DEHP); di-n-octyl-phthalate (DnOP) and bisphenol A (BPA) from drinking and non-potable waters. The extraction of PAEs and BPA was performed using a solvent-based dispersive liquid–liquid microextraction (SB-DLLME) method. The analytical determination was performed using a gas chromatography–ion trap mass spectrometry (GC-IT/MS) analysis. The entire procedure was validated as recoveries were studied according to the volume and the extraction solvent used, pH, and ionic strength. Dynamic linearity ranges and linear equations of all the compounds were experimentally determined as well as the limit of detection (LOD) (1–8 ng mL−1) and the limit of quantification (LOQ) (5–14 ng mL−1), reproducibility, and sensitivity. The method was applied to 15 water samples (mineral water and tap water) for determining PAEs and BPA released from the plastic container. After the release simulation, four PAEs (i.e., DiBP, DBP, DHEP, and DnOP) were determined at very low concentrations (below 1.2 ng mL−1) in two water samples from (sport) bottles.