Impacts of long-term exposure to tetracycline and sulfamethoxazole on the sludge granules in an anoxic-aerobic wastewater treatment system

Simultaneous efficient removal of tetracycline and mitigation of antibiotic resistance genes enrichment by a modified activated sludge process with static magnetic field

To address the increasing issue of antibiotic wastewater, this study applied a static magnetic field (SMF) to the activated sludge process to increase the efficiency of tetracycline (TC) removal from swine wastewater and to reveal its enhanced mechanisms. The results demonstrated that the SMF-modified activated sludge process could achieve almost complete TC removal at sludge loading rates of 0.3 mg TC/g MLSS/d. Analysis of zeta potential and extracellular polymeric substances composition of the activated sludge revealed that SMF increased electrostatic interactions between TC and activated sludge and made activated sludge has much more binding sites, finally resulting in the increased TC biosorption. Metagenomic analysis showed that SMF promoted the enrichment of ammonia-oxidizing bacteria, TC-degrading bacteria, and aromatic compounds-degrading bacteria; it also enhanced ammonia monooxygenase- and cytochrome P450-mediated TC metabolism while upregulating functional genes associated with oxidase, reductase, and dehydrogenase - all contributing to increased TC biodegradation. Additionally, SMF mitigated the enrichment and spread of antibiotic resistance genes (ARGs) by decreasing the abundance of potential hosts of ARGs and inhibiting the upregulation of genes encoding ABC transporters and putative transposase. Based on these findings, this study demonstrates that magnetic field is an enhancement strategy with great potential to relieve the harmful impacts of the growing antibiotic wastewater problem on human health and the ecosystem.

Exposure to zinc and dialkyldimethyl ammonium compound alters bacterial community structure and resistance gene levels in partial sulfur autotrophic denitrification coupled with the Anammox process

Dialkyldimethyl ammonium compound (DADMAC) is widely used in daily life as a typical disinfectant and often co-exists with the heavy metal zinc in sewage environments. This study investigated the effects of co-exposure to zinc (1 mg/L) and DADMAC (0.2-5 mg/L) on the performance, bacterial community, and resistance genes (RGs) in a partial sulfur autotrophic denitrification coupled with anaerobic ammonium oxidation (PSAD-Anammox) system in a sequencing batch moving bed biofilm reactor for 150 days. Co-exposure to zinc and low concentration (0.2 mg/L) DADMAC did not affect the nitrogen removal ability of the PASD-Anammox system, but increased the abundance and transmission risk of free RGs in water. Co-exposure to zinc and medium-to-high (2-5 mg/L) DADMAC led to fluctuations in and inhibition of nitrogen removal, which might be related to the enrichment of heterotrophic denitrifying bacteria dominated by Denitratisoma. Co-exposure to zinc and high concentration DADMAC (5 mg/L) stimulated the secretion of extracellular polymeric substances and increased the proliferation risk of intracellular RGs in sludge. This study provided insights into the application of PSAD-Anammox system and the ecological risks of wastewater containing zinc and DADMAC.

Biofilm formation and microbial interactions in moving bed-biofilm reactors treating wastewater containing pharmaceuticals and personal care products: A review

The risk of pharmaceuticals and personal care products (PPCPs) has been paid more attention after the outbreak of COVID-19, threatening the ecology and human health resulted from the massive use of drugs and disinfectants. Wastewater treatment plants are considered the final stop to restrict PPCPs from wide spreading into the environment, but the performance of conventional treatment is limited due to their concentrations and characteristics. Previous studies have shown the unreplaceable capability of moving bed-biofilm reactor (MBBR) as a cost-effective method with layered microbial structure for treating wastewater even with toxic compounds. The biofilm community and microbial interactions are essential for the MBBR process in completely degrading or converting types of PPCPs to secondary metabolites, which still need further investigation. This review starts with discussing the initiation of MBBR formation and its influencing parameters according to the research on MBBRs in the recent years. Then the efficiency of MBBRs and the response of biofilm after exposure to PPCPs are further addressed, followed by the bottlenecks proposed in this field. Some critical approaches are also recommended for mitigating the deficiencies of MBBRs based on the recently published publications to reduce the environmental risk of PPCPs. Finally, this review provides fundamental information on PPCPs removal by MBBRs with the main focus on microbial interactions, promoting the MBBRs to practical application in the real world of wastewater treatment.

Wastewater Treatment with Bacterial Representatives of the Thiothrix Morphotype

Bacteria of the Thiothrix morphotype, comprising the genera Thiothrix, Thiolinea and Thiofilum, are frequently encountered in domestic and industrial wastewater treatment systems, but they are usually not clearly differentiated due to the marked similarity in their morphologies. Methods ranging from light microscopy, FISH and PCR to modern high-throughput sequencing are used to identify them. The development of these bacteria in wastewater treatment systems has both advantages and disadvantages. On the one hand, the explosive growth of these bacteria can lead to activated sludge bulking or clogging of the treatment system's membranes, with a consequent decrease in the water treatment efficiency. On the other hand, members of the Thiothrix morphotype can improve the quality of granular sludge and increase the water treatment efficiency. This may be due to their capacity for sulfide oxidation, denitrification combined with the oxidation of reduced sulfur compounds, enhanced biological phosphate removal and possibly denitrifying phosphate removal. The recently obtained pangenome of the genus Thiothrix allows the explanation, at the genomic level, of the experimental results of various studies. Moreover, this review summarizes the data on the factors affecting the proliferation of representatives of the Thiothrix morphotype.

Combined toxic effects of fluxapyroxad and multi-walled carbon nanotubes in Xenopus laevis larvae

Carbon nanomaterials rarely exist in isolation in the natural environment, and their combined effects cannot be ignored. Multi-walled carbon nanotubes (MWCNTs) have shown tremendous potential applications in diverse fields, including pollution remediation, biomedicine, energy, and smart agriculture. However, the combined toxicities of MWCNTs and pesticides on non-target organisms, particularly amphibians, are often overlooked. Fluxapyroxad (FLX), a significant succinate dehydrogenase inhibitor fungicide, has been extensively utilized for the protection of food and cash crops and control of fungi. This raises the possibility of coexistence of MWCNTs and FLX. The objective of this study was to explore the individual and combined toxic effects of FLX and MWCNTs on the early life stages of Xenopus laevis. Embryos were exposed to varying concentrations of FLX (0, 5, and 50 μg/L) either alone or in combination with MWCNTs (100 μg/L) for a duration of 17 days. The findings indicated that co-exposure to FLX and MWCNTs worsened the inhibition of growth, liver damage, and dysregulation of enzymatic activity in tadpoles. Liver transcriptomic analysis further revealed that the presence of MWCNTs exacerbated the disturbances in glucose and lipid metabolism caused by FLX. Additionally, the combined exposure groups exhibited amplified alterations in the composition and function of the gut microflora. Our study suggests that it is imperative to pay greater attention to the agricultural applications, management and ecological risks of MWCNTs in the future, considering MWCNTs may significantly enhance the toxicity of FLX.

Enhanced degradation of enrofloxacin in mariculture wastewater based on marine bacteria and microbial carrier

This study aimed to isolate marine bacteria to investigate their stress response, inhibition mechanisms, and degradation processes under high-load conditions of salinity and enrofloxacin (ENR). The results demonstrated that marine bacteria exhibited efficient pollutant removal efficiency even under high ENR stress (up to 10 mg/L), with chemical oxygen demand (COD), total phosphorus (TP), total nitrogen (TN) and ENR removal efficiencies reaching approximately 88%, 83%, 61%, and 73%, respectively. The predominant families of marine bacteria were Bacillaceae (50.46%), Alcanivoracaceae (32.30%), and Rhodobacteraceae (13.36%). They responded to ENR removal by altering cell membrane properties, stimulating the activity of xenobiotic-metabolizing enzymes and antioxidant systems, and mitigating ENR stress through the secretion of extracellular polymeric substance (EPS). The marine bacteria exhibited robust adaptability to environmental factors and effective detoxification of ENR, simultaneously removing carbon, nitrogen, phosphorus, and antibiotics from the wastewater. The attapulgite carrier enhanced the bacteria's resistance to the environment. When treating actual mariculture wastewater, the removal efficiencies of COD and TN exceeded 80%, TP removal efficiency exceeded 90%, and ENR removal efficiency approached 100%, significantly higher than reported values in similar salinity reactors. Combining the constructed physical and mathematical models of tolerant bacterial, this study will promote the practical implementation of marine bacterial-based biotechnologies in high-loading saline wastewater treatment.

Effects of antibiotics on microbial nitrogen cycling and N2O emissions: A review

Sulfonamides, quinolones, tetracyclines, and macrolides are the most prevalent classes of antibiotics used in both medical treatment and agriculture. The misuse of antibiotics leads to their extensive dissemination in the environment. These antibiotics can modify the structure and functionality of microbial communities, consequently impacting microbial-mediated nitrogen cycling processes including nitrification, denitrification, and anammox. They can change the relative abundance of nirK/norB contributing to the emission of nitrous oxide, a potent greenhouse gas. This review provides a comprehensive examination of the presence of these four antibiotic classes across different environmental matrices and synthesizes current knowledge of their effects on the nitrogen cycle, including the underlying mechanisms. Such an overview is crucial for understanding the ecological impacts of antibiotics and for guiding future research directions. The presence of antibiotics in the environment varies widely, with significant differences in concentration and type across various settings. We conducted a comprehensive review of over 70 research articles that compare various aspects including processes, antibiotics, concentration ranges, microbial sources, experimental methods, and mechanisms of influence. Antibiotics can either inhibit, have no effect, or even stimulate nitrification, denitrification, and anammox, depending on the experimental conditions. The influence of antibiotics on the nitrogen cycle is characterized by dose-dependent responses, primarily inhibiting nitrification, denitrification, and anammox. This is achieved through alterations in microbial community composition and diversity, carbon source utilization, enzyme activities, electron transfer chain function, and the abundance of specific functional enzymes and antibiotic resistance genes. These alterations can lead to diminished removal of reactive nitrogen and heightened nitrous oxide emissions, potentially exacerbating the greenhouse effect and related environmental issues. Future research should consider diverse reaction mechanisms and expand the scope to investigate the combined effects of multiple antibiotics, as well as their interactions with heavy metals and other chemicals or organisms.

Microecology of aerobic denitrification system construction driven by cyclic stress of sulfamethoxazole

The construction of aerobic denitrification (AD) systems in an antibiotic-stressed environment is a serious challenge. This study investigated strategy of cyclic stress with concentration gradient (5-30 mg/L) of sulfamethoxazole (SMX) in a sequencing batch reactor (SBR), to achieve operation of AD. Total nitrogen removal efficiency of system increased from about 10 % to 95 %. Original response of abundant-rare genera to antibiotics was changed by SMX stress, particularly conditionally rare or abundant taxa (CRAT). AD process depends on synergistic effect of heterotrophic nitrifying aerobic denitrification bacteria (Paracoccus, Thauera, Hypomicrobium, etc). AmoABC, napA, and nirK were functionally co-expressed with multiple antibiotic resistance genes (ARGs) (acrR, ereAB, and mdtO), facilitating AD process. ARGs and TCA cycling synergistically enhance the antioxidant and electron transport capacities of AD process. Antibiotic efflux pump mechanism played an important role in operation of AD. The study provides strong support for regulating activated sludge to achieve in situ AD function.

Effect of streptomycin sulphate on the nitrification system in activated sludge: insight into nitrification characteristic, antibiotic resistance gene and microbial community

Wastewater with residual streptomycin sulphate usually contains high content of ammonia-nitrogen. However, the biological removal process of ammonia-nitrogen under streptomycin sulphate circumstance was unclear. In this study, short-term and long-term effects of streptomycin sulphate on biological nitrification systems, including AOB, NOB, SAOR, SNOR and SNPR, were evaluated comprehensively. The results indicated IC50 for AOB and NOB were 7.5 and 6.6 mg/L. SAOR and SNPR could be decreased to 3.43 ± 0.52 mg N/(g MLSS·h) and 0.24 ± 0.03 mg N/(g MLSS·h) while the addition of streptomycin sulphate was 10 mg/L. When streptomycin sulphate addition was stopped, nitrification ability recovered slightly, SAOR and SNPR increased to 9.37 ± 0.36 mg N/(g MLSS·h) and 1.66 ± 0.49 mg N/(g MLSS·h), respectively. The protein of EPS increased gradually during the acclimatization process, and the maximal protein value was 68.24 mg/g MLSS on the 100th day, however, no significant change of polysaccharose was observed during the acclimatization process. High abundance of ARGs and intI1 was detected in effluent and sludge of the biological treatment system. The maximal relative abundance of aadA1 in the sludge appeared on the 140th day, and increased by 0.99 orders of magnitude. Biological diversity decreased significantly during the acclimatization process, relative abundance of nitrosomonas was changed from 9.07% to 38.68% on the 61st day, while relative abundance of nitrobacter was changed from 1.30% to 0.64%. It should be noted that relative abundances of nitrosomonas and nitrobacter were reduced to 16.17% and 0.25% on the 140th day. This study would be helpful for nitrogen removal in wastewater with antibiotic.

Automated method for the solid phase extraction of tetracyclines in wastewater followed by fluorimetric determination

This work presents a multisyringe flow injection analysis (MSFIA) system for the automatic extraction and determination of tetracyclines in wastewater samples. The sample was adjusted with Na2EDTA buffer before solid-phase extraction with an Oasis HLB column used for the analyte preconcentration. The europium (Eu3+)-based and citrate-mediated method (using Tris-HCl buffer) was selected for the fluorimetric analysis (λexc/em = 400/612 nm). For fluorescence detection, a low-cost system consisting of an USB 2000 CCD detector and a 3D-printed support that holds a LED light source was used. Under optimized conditions, the proposed method provided low limits of detection (9.4 μg L-1) and quantification (31 μg L-1), and good values for intra-day (<4 %) and inter-day precisions (<6 %). Recoveries of spiked TCs in wastewater samples ranged from 87 to 106 %. The results of this work were in good agreement with the measurements obtained by liquid chromatography coupled to a fluorescence detector.

Effect of antibiotic exposure on the characteristics of activated sludge in a landfill leachate biological treatment system

Changes in the activated sludge performance in an anaerobic/aerobic biological treatment system for leachate was discussed under the condition of tetracycline (TC) exposure. The results show that a low concentration of TC did not have an obvious effect on the removal of chemical oxygen demand (COD) while a high concentration of TC had a certain promoting effect. Under the stimulation of TC, the particle size distribution of anaerobic/aerobic sludge tended to be more uniform, the particle size of anaerobic sludge decreased while the settleability increased; however, the particle size of aerobic sludge increased due to bulking. With the addition of TC, the concentration of most heavy metal ions in sludge samples increased.TC exposure results in the release of a large amount of extracellular polymeric substances (EPS), thus leading to a smoother surface of anaerobic sludge and a rougher surface of aerobic sludge. The high removal efficiency of COD under the high concentration of TC was also presumed to be due to EPS promoting the microbial absorption of anaerobic substances in the leachate. The results clearly showed that TC had a bacteriostatic effect. After antibiotic exposure, the abundance and diversity index of bacteria in each reactor decreased obviously, the microbial community evolved, and the dominant species at the genus and phylum levels of anaerobic/aerobic reactors changed. This study provides a better understanding the effect of TC on activated sludge and has reference value for the management of antibiotic exposure in leachate treatment facilities.

Deciphering performance and microbial characterization of marine anammox bacteria-based consortia treating nitrogen-laden hypersaline wastewater: Inhibiting threshold of salinity

Hypersaline wastewater posed a challenge to microbial nitrogen removal processes. Herein, halophilic marine anammox bacteria (MAB) were applied to treat nitrogen-rich wastewater with 35-90 g/L salts for the first time. It was found that MAB, with low relative abundance (2.3-6.9 %), still exhibited good nitrogen removal efficiency (>90 %) under 35-70 g/L salts. The specific anammox activity peaked at 180.16 mg N/(g·VSS·d) at 65 g/L salts. MAB secreted more extracellular polymeric substances to resist the adverse effects of hypersaline stress. Nevertheless, the nitrogen removal deteriorated at 75 g/L salts, and further collapsed as the salinity increased. At 90 g/L salts, total nitrogen removal rate decreased by 74 % compared with that of 35 g/L salts. Besides, SBR1031 increased from 12.0 % (35 g/L salts) to 17.4 % (90 g/L salts) and became the dominant bacterial genus in the reactor. This work shed light on the treatment of hypersaline wastewater through MAB.

Mechanisms of total phosphorus removal and reduction of β-lactam antibiotic resistance genes by exogenous fungal combination activated sludge

This study utilized Trichoderma and activated sludge to construct combined activated sludge (TAS). The metagenomic approach was employed to examine the shifts in microbial community structure and function of TAS under amoxicillin stress and investigate the mechanism underlying the reduction of β-lactam antibiotic resistance genes (β-ARGs). The findings demonstrated that the elevated aundance of glpa, glpd, ugpq, glpq, and glpb were primarily responsible for the reduction in total phosphorus (TP) removal by TAS. The increased abundance of Proteobacteria and Verrucomicrobia led to enhanced expression of ugpb, phnd, and phne, thereby improving the TP removal of TAS. Furthermore, antibiotic inactivation has gradually become the primary antibiotic resistance mechanism in TAS. Specifically, an increase in the abundance of OXA-309 in TAS will decrease the probability of amoxicillin accumulation in TAS. A decrease in β-ARGs diversity confirmed this. This study presents a novel approach to reducing antibiotic and ARG accumulation in sludge.

Response of marine anammox bacteria to long-term hydroxylamine stress: Nitrogen removal performance and microbial community dynamics

The response of anammox bacteria to hydroxylamine has not been well explained. Herein, hydroxylamine was long-term added as the sole substrate to marine anammox bacteria (MAB) in saline wastewater treatment for the first time. MAB could tolerate 5 mg/L hydroxylamine. However, MAB activity was inhibited by the high dose of hydroxylamine (40 mg/L), and hydroxylamine removal efficiency was only 3 %. Remarkably, when hydroxylamine reached 20 mg/L, ammonium was produced the most at 2.88 mg/L, mainly by the hydroxylamine and hydrazine disproportionations. Besides, the relative abundance of Candidatus Scalindua decreased from 4.6 % to 0.6 % as the hydroxylamine increased from 0 to 40 mg/L. MAB secreted more extracellular polymeric substances to resist hydroxylamine stress. However, long-term hydroxylamine loading led to the disintegration of MAB granules. This work shed light on the response of MAB to hydroxylamine in saline wastewater treatment.

Roles of extracellular polymeric substances in the adsorption and removal of norfloxacin during hydrothermal treatment of sewage sludge

Hydrothermal treatment (HT) is promising to remove antimicrobials from sewage sludge (SS); however, the mechanism of antimicrobial degradation during the HT of SS is not fully understood. In this study, the roles of extracellular polymeric substances (EPS) in the removal and transformation of norfloxacin (NOR) during the HT of SS at temperatures of 100 and 160 °C were investigated. The results indicated that the degradation of NOR increased with increasing HT temperature, with maximum NOR removal (52%) achieved at 160 °C. Furthermore, the NOR in sludge showed higher degradation efficiencies than the control as HT temperature was higher than 120 °C. Evident promotion effects of bound-EPS (B-EPS) in sludge were observed on the NOR degradation as HT temperature was higher than 120 °C, leading to the mineralization and deamination of protein-like components in EPS during HT. Beside, the adsorption capacity of NOR during the HT of SS decreased at temperatures higher than 120 °C. The evolution of the spatial structure of B-EPS was predominantly responsible for the adsorption of antimicrobials, a spontaneous process driven mainly by hydrophilic interactions. With the hydrothermal conversion of B-EPS, the electron transfer, and reactive species (3EPS* and ·OH) derived from B-EPS could facilitate the degradation of NOR. In particular, hydrogen bonds between B-EPS and NOR increased the apparent yield of ·OH and accelerated the decarboxylation of NOR during HT at temperatures higher than 120 °C. A toxicity evaluation suggested that HT for NOR degradation could attenuate toxicity, whereas deep oxidation or mineralization would be needed to promote ecosystem safety. These findings provide new insights into the hydrothermal activation of EPS and the interrelated hydrothermal fate of antimicrobials and other toxic pollutants in sludge.

Sulfamethoxazole removal from wastewater via anoxic/oxic moving bed biofilm reactor: Degradation pathways and toxicity assessment

The effects of sulfamethoxazole (SMZ), an antibiotic commonly detected in the water environment, on the performance of a single staged anoxic/oxic moving bed biofilm reactor (A/O MBBR), was investigated. The anoxic zone played a key role in the removal of SMZ with a percentage of contribution accounting for around 85% in the overall removal. Denitrifying heterotrophic microbes present in the anoxic zone showed relatively more resistance to higher SMZ loads. It was found that in extracellular polymeric substances, protein content was increased consistently with the increase in SMZ concentration. Based on the detected biotransformation products, four degradation pathways were proposed and the toxicity was evaluated. Metagenomic analysis revealed that at higher SMZ load the activity of genera, such as Proteobacteria and Actinobacteria was significantly affected. In summary, proper design and operation of staged A/O MBBR can offer a resilient and robust treatment towards SMZ removal from wastewater.

A critical review of improving mainstream anammox systems: Based on macroscopic process regulation and microscopic enhancement mechanisms

Full-scale anaerobic ammonium oxidation (anammox) engineering applications are vastly limited by the sensitivity of anammox bacteria to the complex mainstream ambience factors. Therefore, it is of great necessity to comprehensively summarize and overcome performance-related challenges in mainstream anammox process at the macro/micro level, including the macroscopic process variable regulation and microscopic biological metabolic enhancement. This article systematically reviewed the recent important advances in the enrichment and retention of anammox bacteria and main factors affecting metabolic regulation under mainstream conditions, and proposed key strategies for the related performance optimization. The characteristics and behavior mechanism of anammox consortia in response to mainstream environment were then discussed in details, and we revealed that the synergistic nitrogen metabolism of multi-functional bacterial genera based on anammox microbiome was conducive to mainstream anammox nitrogen removal processes. Finally, the critical outcomes of anammox extracellular electron transfer (EET) at the micro level were well presented, carbon-based conductive materials or exogenous electron shuttles can stimulate and mediate anammox EET in mainstream environments to optimize system performance from a micro perspective. Overall, this review advances the extensive implementation of mainstream anammox practice in future as well as shedding new light on the related EET and microbial mechanisms.

Extraction and application of extracellular polymeric substances from fungi

Extracellular polymeric substances (EPS) are extracellular metabolites of microorganisms, highly associated with microbial function, adaptation, and growth. The main compounds in EPS have been revealed to be proteins, polysaccharides, nucleic acids, humic substances, lipids, etc. EPS are not only biomass, but also a biogenic material. EPS have high specific surface, abundant functional groups, and excellent degradability. In addition, they are more extensible to the environment than the microbial cells themselves, which exhibits their huge advantages. Therefore, they have been applied in many fields, such as the environment, ecosystem, basic commodities, and medicine. However, the functions of EPS highly depend on the suitable extraction process, as different extraction methods have different effects on their composition, structure, and function. There are many types of EPS extraction methods, in which physical and chemical methods have been widely utilized. This review summarizes the extraction methods and applications of EPS. In addition, it considers some important gaps in current knowledge, and indicates perspectives of EPS for their future study.

Fabrication of an intimately coupled photocatalysis and biofilm system for removing sulfamethoxazole from wastewater: Effectiveness, degradation pathway and microbial community analysis

Sulfamethoxazole (SMX) is an extensively applied antibiotic frequently detected in municipal wastewater, which cannot be efficiently removed by conventional biological wastewater processes. In this work, an intimately coupled photocatalysis and biodegradation (ICPB) system consisting of Fe³⁺-doped graphitic carbon nitride photocatalyst and biofilm carriers was fabricated to remove SMX. The results of wastewater treatment experiments showed that 81.2 ± 2.1% of SMX was removed in the ICPB system during the 12 h, while only 23.7 ± 4.0% was removed in the biofilm system within the same time. In the ICPB system, photocatalysis played a key role in removing SMX by producing hydroxyl radicals and superoxide radicals. Besides, the synergism between photocatalysis and biodegradation enhanced the mineralization of SMX. To understand the degradation process of SMX, nine degradation products and possible degradation pathways of SMX were analyzed. The results of high throughput sequencing showed that the diversity, abundance, and structure of the biofilm microbial community remained stable in the ICPB system at the end of the experiments, which suggested that microorganisms had accommodated to the environment of the ICPB system. This study could provide insights into the application of the ICPB system in treating antibiotic-contaminated wastewater.

Hierarchical stringent response behaviors of activated sludge system to stressed conditions

The stringent response of activated sludge systems to either stressed or harmful environments is important for the stable operation of activated sludge, which is examined by taking copper ion (Cu²⁺) as a stress model in this study. When weak stress was employed (Cu²⁺ ≤ 2.5 mg/L), the N-acyl-homoserine lactones (AHLs) of C6-, C8-, and C10-HSL increased by 30 %, 13 %, and 127 %, respectively, while the redox sensor green (RSG) intensity decreased by 28 %. Encountering the increased stress (2.5 mg/L < Cu²⁺ ≤ 5 mg/L), bacteria concentration in the supernatant increased by 87 %. However, the respiration rates of autotrophic and heterotrophic bacteria (SOUR_a and SOUR_h) and adenosine triphosphate decreased by 52 %, 18 %, and 27 %, respectively, and the flocs disintegrated with a diameter decreasing from 57 to 51 μm. When the stress became more serious (Cu²⁺ > 5 mg/L), the respiration rates continued to decline, but the quasi-endogenous respiration ratio (R_q/t) increased from 31 % to 47 %. Negligible changes occurred in the endogenous respiration rate (SOUR_e), adenosine diphosphate, and adenosine monophosphate. Based on these results, a hierarchical stringent response model of the activated sludge system to stressed conditions was proposed, and these responses were evaluated by respirogram. The initial response to weak stress was related to the most sensitive signals of quorum sensing and RSG intensity, well described by the quasi-endogenous respiration rate. The adaptive response to increased stress was the proactive migrations of low- and high-nucleic-acid bacteria to the supernatant, causing the looseness and even disintegration of sludge flocs, well described by SOUR_a, SOUR_h, and R_q/t. The lethal response to lethal stress was related to endogenous metabolic processes, well described by SOUR_e. This work provides new insights into understanding the stringent response of activated sludge systems to some stressed conditions. It helps to regulate the stability of activated sludge systems with respirogram technology.

New insight into soluble extracellular metabolites during sludge bulking process based on excitation-emission matrix spectroscopy and ultrahigh-performance liquid chromatography-mass spectrometry

Soluble extracellular metabolites (SEM) produced by microorganisms might significantly change during sludge bulking, which is a major operational problem caused by the excessive growth of filamentous bacteria. However, knowledge remains limited about the dynamics and potential role of SEM in the bulking of sludge. In this study, filamentous bulking was simulated in a laboratory-scale reactor and changes to SEM characteristics during the bulking process were investigated using excitation-emission matrix spectroscopy and ultrahigh-performance liquid chromatography-mass spectrometry. SEM components changed significantly at different phases of sludge bulking. Changes in SEM were closely correlated with the structure of the bacterial community. Based on the EEM profiles, significant increases in fulvic acid-like and humic acid-like substances in SEM were observed with the development of filamentous bulking. The degree of humification in SEM showed a clear increasing trend. Untargeted extracellular metabolomic analysis showed that the intensity of berberine and isorhamnetin in SEM increased significantly during the bulking phase, which might synergistically facilitate the development of filamentous bulking.

Biotransformation of sulfamethoxazole (SMX) by aerobic granular sludge: Removal performance, degradation mechanism and microbial response

Aerobic granular sludge (AGS) is a promising biotechnology for the treatment of antibiotic-rich wastewater. However, little is known about the antibiotics degradation mechanism and microbial response in a sulfamethoxazole (SMX)-loaded AGS system. Herein, the results of a continuous 240 days test suggested that 0.5-5 mg/L of SMX could be thoroughly removed by AGS via adsorption and degradation. The degradation pathway of SMX involved the hydrolysis of the sulfonamide bond and cleavage of NS or CS bonds, subsequently leading to the production of small molecular substances (e.g. benzene and 5-methyl-isoxazole). In terms of the AGS system, it exhibited a strong resistance to 0.5 mg/L of SMX, while 1 and 5 mg/L of SMX significantly inhibited the microbial growth, declined the nitrification efficiency, weakened the sludge settleability, and triggered the excessive growth of filamentous bacteria. Besides, the secretion of extracellular polymer substances was suppressed by 57.3% when increasing the SMX concentration from 0.5 to 5 mg/L, which was not conducive to the system stability. The long-term presence of SMX enhanced the proliferation of antibiotics resistance genes (sul1and sul2) and exerted a strong selection pressure on the microbial community, especially with Thiothrix being the dominating genus. Overall, this study elucidated that AGS qualified promising application prospects in the removal of SMX present in wastewater, but SMX at high concentrations posed great adverse impacts on the performance of the AGS system, which causes concern when treating SMX rich wastewaters.

Effect of minute amounts of arsenic on the sulfamethoxazole removal and microbial community structure via the SBR system

In this study, the effect of arsenic on the sulfamethoxazole (SMX) removal efficiency and microbial community structure was investigated over 60 days using the SBR process. The results showed that the presence of arsenic had no significant impact on the system performance, the removal efficiencies of two reactors, R1 (the control test) and R2 (with the addition of arsenic), were 13.36 ± 5.71 and 14.20 ± 5.27%, which were attributed to the adsorption of SMX by fulvic acid-like substances and tryptophan-like proteins of extracellular polymeric substances. Compared to the seed sludge, the species number indicated that R2 possessed the richer diversity, while R1 possessed the lower diversity on day 60, which might be relative to the transferring of antibiotic resistance genes (ARGs) in sludge bacterial communities; the minute amounts of arsenic could make the relative levels of Sul1 and Sul2 genes which encode ARGs of sulfonamides in R2 (2.07 and 2.47%) be higher than that in R1 (1.65 and 1.27%), which made the bacterial community of the R2 system more adaptable to SMX stress. Therefore, the minute amounts of arsenic weakened the effect of SMX on the system and enhanced the stability of the microbial community structure.

Extracellular polymeric substances-antibiotics interaction in activated sludge: A review

Antibiotics, the most frequently prescribed drugs, have been widely applied to prevent or cure human and veterinary diseases and have undoubtedly led to massive releases into sewer networks and wastewater treatment systems, a hotspot where the occurrence and transformation of antibiotic resistance take place. Extracellular polymeric substances (EPS), biopolymers secreted via microbial activity, play an important role in cell adhesion, nutrient retention, and toxicity resistance. However, the potential roles of sludge EPS related to the resistance and removal of antibiotics are still unclear. This work summarizes the composition and physicochemical characteristics of state-of-the-art microbial EPS, highlights the critical role of EPS in antibiotics removal, evaluates their defense performances under different antibiotics exposures, and analyzes the typical factors that could affect the sorption and biotransformation behavior of antibiotics. Next, interactions between microbial EPS and antibiotic resistance genes are analyzed. Future perspectives, especially the engineering application of microbial EPS for antibiotics toxicity detection and defense, are also emphatically stressed.

Plastisphere showing unique microbiome and resistome different from activated sludge

Plastisphere (the biofilm on microplastics) in wastewater treatment plants (WWTPs) may enrich pathogens and antibiotic resistance genes (ARGs) which can cause risks to the ecological environment by discharging into receiving waters. However, the microbiome and resistome of plastisphere in activated sludge (AS) systems remain inconclusive. Here, metagenome was applied to investigate the microbial composition, functions and ARGs of the Polyvinyl chloride (PVC) plastisphere in lab-scale reactors, and revealed the effects of tetracycline (TC) and/or Cu(II) pressures on them. The results indicated that the plastisphere provided a new niche for microbiota showing unique functions distinct from the AS. Particularly, various potentially pathogenic bacteria tended to enrich in PVC plastisphere. Moreover, various ARGs were detected in plastisphere and AS, but the plastisphere had more potential ARGs hosts and a stronger correlation with ARGs. The ARGs abundances increased after exposure to TC and/or Cu(II) pressures, especially tetracycline resistance genes (TRGs), and the results further showed that TRGs with different resistance mechanisms were separately enriched in plastisphere and AS. Furthermore, the exogenous pressures from Cu(II) or/and TC also enhanced the association of potential pathogens with TRGs in PVC plastisphere. The findings contribute to assessing the potential risks of spreading pathogens and ARGs through microplastics in WWTPs.

The responses of marine anammox bacteria-based microbiome to multi-antibiotic stress in mariculture wastewater treatment

Saline mariculture wastewater containing multi-antibiotics poses a challenge to anaerobic ammonia oxidation (anammox) process. Herein, the halophilic marine anammox bacteria (MAB)-based microbiome was used for treating mariculture wastewater (35‰ salinity) under multi-antibiotics (enrofloxacin + oxytetracycline + sulfamethoxazole, EOS) stress. And the main focus of this study lies in the response of MAB-based microbiome against multi-antibiotics stress. It is found that MAB-based microbiome shows stable community structure and contributes high nitrogen removal efficiency (>90%) even under high stress of EOS (up to 4 mg·L^-1). The relative abundance of main functional genus Candidatus Scalindua, responsible for anammox, had little change while controlling the influent EOS concentration within 4 mg·L^-1, whereas, significantly decreased to 2.23% at EOS concentration of as high as 24 mg·L^-1. As an alternative, antibiotic resistance bacteria (ARB) species Rheinheimera dominated the microbial community of MAB-based biological reactor under extremely high EOS stress (e.g. 24 mg·L^-1 in influent). The response mechanism of MAB-based microbiome consists of extracellular and intracellular defenses with dependence of EOS concentration. For example, while EOS within 4 mg·L^-1 in this study, most of the antibiotics were retained by extracellular polymeric substances (EPS) via adsorption; If increasing the EOS concentration to 8 and even 24 mg·L^-1, part of antibiotics could intrude into the cells and cause the intracellular accumulation of antibiotic resistance genes (ARGs) (total abundance up to 2.44 × 10^-1 copies/16S rRNA) for EOS response. These new understandings will facilitate the practical implementation of MAB-based bioprocess for saline nitrogen- and antibiotics-laden wastewater treatment.

Trace antibiotics increase the risk of antibiotic resistance genes transmission by regulating the biofilm extracellular polymeric substances and microbial community in the sewer

Sewer is considered a potential hotspot for antibiotic resistance, but the occurrence and proliferation of antibiotic resistance genes (ARGs) under trace antibiotics exposure have received little attention. This work evaluated the effects of tetracycline (TC) and sulfamethoxazole (SMX) individually and in combination in the sewer system and revealed the related mechanisms of ARG proliferation. The relative abundance of tetA and sul1 increased the most under TC and SMX stress, respectively, whereas sul1 increased the most under combined stress. Intl1 was abundant in both the liquid phase and the biofilm, and redundancy analysis confirmed that horizontal gene transfer was the main reason for the proliferation of ARGs. The increase in extracellular polymeric substances (EPS) secretion and the enhancement of the main hydrophobic functional groups facilitated the accumulation of biofilms, which promoted the proliferation of ARGs in biofilms. The relative abundance of most ARGs in the liquid phase was significantly correlated with EPS, protein and tryptophan-like substances. Furthermore, the microbial community structure and diversity affected the proliferation and spread of ARGs in the sewer. These findings contribute to our further understanding of the proliferation and development of ARGs in the sewer and lay the foundation for the front-end control of ARGs.

Effect of sulfamethoxazole on nitrate removal by simultaneous heterotrophic aerobic denitrification

The increase in mariculture activities worldwide has not only led to a rise of nitrogen compounds in the ecosystem but has also intensified the accumulation of antibiotics in both terrestrial and marine environments. This study focused on the effect of typical antibiotics, specifically sulfamethoxazole (SMX) on nitrate removal from mariculture wastewater by aerobic denitrification process; an aerobic denitrification system feeding with 148.2 mg/L COD, 8.59 mg/L nitrate, 0.72 mg/L nitrite, and 4.75 mg/L ammonium was set up. The hydraulic retention time (HRT) was 8 h. As the aerobic bioreactor started up successfully without SMX dosage, an excellent removal of ammonium, nitrite, and nitrate was achieved at 91.35%, 93.33%, and 88.51%, respectively; the corresponding effluent concentrations were 0.41 mg/L, 0.048 mg/L, and 0.96 mg/L. At the influent SMX doses of 0, 1, 5, and 10 mg/L, the COD removal reached 96.91%, 96.27%, 88.69%, and 85.89%, resulting in effluent concentrations of 4.53, 5.45, 17.38, and 20.6 mg/L, respectively. Nitrification was not inhibited by SMX dosage. However, aerobic denitrification was inhibited by 10 mg/L SMX. Proteobacteria was the most abundant phylum, and surprisingly its abundance increased with the increase in SMX concentration. An excellent SMX degradation was noted at initial SMX dosages of 1, 5, and 10 mg/L; the removal rate was 100%,100%, and 99.8%, respectively. The SMX degrading genera Comamonas sp., Acinetobacter sp., and Thauera sp. are of great validity to wastewater engineers because they have demonstrated efficiency in simultaneous heterotrophic aerobic denitrification and antibiotic degradation as well as COD removal. PRACTITIONER POINTS: Nitrification was not inhibited by increase in SMX dosage. An increase in SMX dosage inhibited aerobic denitrification. COD removal was not affected by increased SMX dosage. Comamonas, Acinetobacter, and Thauera had high efficiency in COD removal and SMX degradation.

Dissemination of antibiotic resistance under antibiotics pressure during anaerobic co-digestion of food waste and sludge: Insights of driving factors, genetic expression, and regulation mechanism

This study revealed the effects and regulation mechanisms on antibiotic resistance genes (ARGs) dissemination during anaerobic co-digestion (AcoD) of food waste and sludge under the exposure of tetracycline, sulfamethoxazole (SMZ) and erythromycin (ERY). Results indicated antibiotics significantly increased the abundance of ARGs, and selectively enriched integron gene, suggesting antibiotics promoted the dissemination of ARGs. Procrustes analysis indicated that bacterial community, integrons and physicochemical properties displayed significant correlations with ARGs, and they respectively contributed 10.61%, 6.94% and 2.97% of explanations on ARGs variation. Especially, the maximum combined contribution (48.6%) of bacterial community and integrons, implying their significances on ARGs alteration. Metatranscriptomic analysis further demonstrated antibiotics upregulated the expressions of total ARGs and virulence factors, raising potential risks. The proposed mechanisms for ARGs dissemination facilitated by antibiotics might be attributed to the changes of ARGs-regulated functions for inducing DNA/cell damage and DNA conjugation during AcoD.

Lanza V, Rodríguez-Beltrán J, Galán JC, San Millán A, Cantón R, Coque TM. Evolutionary Pathways and Trajectories in Antibiotic Resistance

Evolution is the hallmark of life. Descriptions of the evolution of microorganisms have provided a wealth of information, but knowledge regarding "what happened" has precluded a deeper understanding of "how" evolution has proceeded, as in the case of antimicrobial resistance. The difficulty in answering the "how" question lies in the multihierarchical dimensions of evolutionary processes, nested in complex networks, encompassing all units of selection, from genes to communities and ecosystems. At the simplest ontological level (as resistance genes), evolution proceeds by random (mutation and drift) and directional (natural selection) processes; however, sequential pathways of adaptive variation can occasionally be observed, and under fixed circumstances (particular fitness landscapes), evolution is predictable. At the highest level (such as that of plasmids, clones, species, microbiotas), the systems' degrees of freedom increase dramatically, related to the variable dispersal, fragmentation, relatedness, or coalescence of bacterial populations, depending on heterogeneous and changing niches and selective gradients in complex environments. Evolutionary trajectories of antibiotic resistance find their way in these changing landscapes subjected to random variations, becoming highly entropic and therefore unpredictable. However, experimental, phylogenetic, and ecogenetic analyses reveal preferential frequented paths (highways) where antibiotic resistance flows and propagates, allowing some understanding of evolutionary dynamics, modeling and designing interventions. Studies on antibiotic resistance have an applied aspect in improving individual health, One Health, and Global Health, as well as an academic value for understanding evolution. Most importantly, they have a heuristic significance as a model to reduce the negative influence of anthropogenic effects on the environment.

Antibiotic residues in wastewaters from sewage treatment plants and pharmaceutical industries: Occurrence, removal and environmental impacts

Sewage treatment plants (STPs) and pharmaceutical manufactories (PMFs) are recognized as important reservoirs for aquatic pollution with antibiotics. Although the occurrence of multiple classes of antibiotics has been mostly reported for STPs and PMFs, knowledge on the effects of wastewater treatment processes on the removal of antibiotics is not well documented. In this study, wastewaters were collected from different treatment points of two STPs and two PMFs in eastern China. Thirty-seven antibiotics within the four classes of fluoroquinolones (FQs), macrolides (MACs), sulfonamides (SAs) and tetracyclines (TCs) were analyzed. Among the investigated antibiotics, 19-33 out of 37 target compounds were detected at least once in the STPs wastewaters ranging from low ng/L to approximately 12.7 μ/L. In the wastewater samples collected from PMFs, up to 34 antibiotics were present with detection frequencies up to 100%, showing generally higher concentrations (up to 19.0 μ/L) than those at the STPs. FQs and SAs were the dominant antibiotic families, which accounted for more than 90% of the total antibiotic concentration in the wastewaters. Moreover, the removal of antibiotics by anaerobic-anoxic-oxic (A²O), membrane bioreactor (MBR) and conventional activated sludge (CAS) systems was evaluated. The MBR system exhibited the best performance, mainly due to the processes of biodegradation and sorption during biological treatments. Notably, several SAs (SMP, SMZ) and FQs (CIN, ENO) antibiotics were consistently detected at concentration levels of μ/L in the effluent samples. The culturable antibiotic-resistance tests and risk assessment indicated that the antibiotic-contaminated effluents would facilitate the development of resistant bacteria and pose high toxicity to non-target organisms in the aquatic environment. Overall, the findings suggested an urgent need for improving the wastewater treatment technologies for simultaneous removal of different classes of antibiotics.

Efficiency of sulfamethoxazole removal from wastewater using aerobic granular sludge: influence of environmental factors

The effects of adsorption, sulfamethoxazole (SMX) content, chemical oxygen demand (COD), and dissolved oxygen (DO) are recognized to be crucial for SMX removal in the aerobic granular sludge (AGS) system. Therefore, we investigated the impact of adsorption and these three different environmental factors on the SMX removal loading rate and removal efficiency of an AGS system, and determined the differences in microbial community composition under different environmental conditions. Adsorption was not the main SMX removal mechanism, as it only accounted for 5% of the total removal. The optimal SMX removal conditions were obtained for AGS when the COD, DO, and SMX concentrations were 600 mg/L, 8 mg/L, and 2,000 µg/L, respectively. The highest SMX removal efficiency was 93.53%. Variations in the three environmental factors promoted the diversity and changes of microbial communities in the AGS system. Flavobacterium, Thauera, and norank_f_Microscillaceae are key microorganisms in the AGS system. Thauera, and norank_f_Microscillaceae were sensitive to increases in SMX concentrations and beneficial for degrading high SMX concentrations. In particular, Flavobacterium abundances gradually decreased with increasing SMX concentrations.

Effects of sulfamethoxazole on aerobic sludge granulation process

AIMS

Our purpose was to clarify the effect of sulfamethoxazole (SMX) on the start-up period, particle formation, and treatment efficiency of an aerobic granular sludge system.

METHODS AND RESULTS

We compared an R1 granular sequencing batch reactor (GSBR) started with 5 μg L^-1 SMX and an R2 GSBR started without SMX, as a control, to investigate the impact of a trace amount of SMX (5 μg L^-1 ) on aerobic granular sludge (AGS) characteristics and the removal of conventional contaminants. AGS granulation in the R1 system was not inhibited by SMX, but the granule particle size was smaller than that in the R2 system. Both systems had good performance removing conventional pollutants. Extracellular polymeric substance secretion in the R1 system was lower than that in the R2 system. After stabilizing reactor operations, the SMX removal efficiency in the R1 system (~73.93%) was higher than that in the R2 system (~70.66%). The start-up modes also determined the differences in the microbial community structure of the AGS systems.

CONCLUSIONS

SMX-activated AGS performed better than AGS without SMX.

SIGNIFICANCE AND IMPACT OF STUDY

The study can help engineers determine start-up modes with varieties of antibiotics in AGS processes and provide references for the optimization of water treatment processes.

Responses of bacterial and bacteriophage communities to long-term exposure to antimicrobial agents in wastewater treatment systems

The occurrence of antibacterial agents has received increasing concern due to their possible threats to human health. However, the effects of antibacterial residues on the evolution and dynamics between bacteria and bacteriophages in wastewater treatment systems have seldom been researched. Especially for phages, little is known about their response to antimicrobial exposure. In this study, two identical anoxic-aerobic wastewater treatment systems were established to evaluate the responses of bacterial and phage communities to long-term exposure to antimicrobial agents. The results indicated simultaneous exposure to combined antimicrobials significantly inhibited (p < 0.05) the abundance of phages and bacteria. Metagenomic sequencing analysis indicated the community of bacteria and phages changed greatly at the genus level due to combined antibacterial exposure. Additionally, long-term exposure to antimicrobial agents promoted the attachment of receptor-binding protein genes to Klebsiella, Escherichia and Salmonella (which were all members of Enterobacteriaceae). Compared to that in the control system, the numbers of receptor-binding protein genes on their possible phages (such as Lambdalikevirus and P2likevirus) were also obviously higher when the microorganisms were exposed to antimicrobials. The results are helpful to understanding the microbial communities and tracking the relationship of phage-bacterial host systems, especially under the pressure of antimicrobial exposure.

Bacteriophage ecology in biological wastewater treatment systems

Biological wastewater treatment (BWT) is currently the most widely applied approach for treating wastewater. The performance of BWT systems depends on the complex microbial communities they support. Although bacteriophages (phages), which are the viruses that infect prokaryotes, are recognized as the most abundant life entities, understanding of their ecological roles in BWT systems remains limited. Here, we review recent progress in phage-associated researches in BWT systems, including the interactions between phage and host, polyvalent phages, the influence of phage activity on BWT performance, and the potential applications of phage-based control for sludge bulking/foaming and pathogens. The challenges and perspectives of phage ecology are also outlined, which are expected to provide implications for future research and applications.Key points• Phage-host interactions in BWT systems are summarized• Impacts of phage activities on BWT performance• Potential applications of phages in BWT systems.

Effects of the antibiotics trimethoprim (TMP) and sulfamethoxazole (SMX) on granulation, microbiology, and performance of aerobic granular sludge systems

This work assessed the effect of the antibiotics trimethoprim (TMP) and sulfamethoxazole (SMX) on the granulation process, microbiology, and organic matter and nutrient removal of an aerobic granular sludge (AGS) system. In addition, after the maturation stage, the impact of the redox mediator anthraquinone-2,6-disulfonate (AQDS) (25 μM) on the biotransformation of the antibiotics was evaluated. The reactor R1 was maintained as a control, and the reactor R2 was supplemented with TMP and SMX (200 μg L^-1). The ability to remove C, N, and P was similar between the reactors. However, the structural integrity of the AGS was impaired by the antibiotics. Low TMP (∼30%) and SMX (∼60%) removals were achieved when compared to anaerobic or floccular biomass aerobic systems. However, when the system was supplemented with AQDS, an increase in the removal of TMP (∼75%) and SMX (∼95%) was observed, possibly due to the catalytic action of the redox mediator on cometabolic processes. Regarding the microbial groups, whereas Proteobacteria and Bacterioidetes increased, Planctomycetes decreased in both reactors. However, TMP and SMX presence seemed to inhibit or favor some genera during the formation of the granules, possibly due to their bactericidal action.

Biodegradation of sulfonamides in both oxic and anoxic zones of vertical flow constructed wetland and the potential degraders

The pollution of wastewater with antibiotics and antibiotics resistance genes has attracted public concerns about ecosystem and global health. Swine wastewater can contain high concentrations of antibiotics, especially sulfonamides, even after full-scale wastewater treatment. In this study, mesocosm-scale vertical flow constructed wetlands (VF-CWs) were applied to abate nutrients and antibiotics in swine wastewater containing sulfonamides. VF-CWs performed well in the removal of both nutrients and antibiotics. Sulfonamides did not influence total organic carbon (TOC) and total phosphorus (TP) removal, and even slightly enhanced NH₄⁺-N removal. High removal efficiencies (26.42-84.05%) were achieved for sulfadiazine (SDZ), sulfamethoxazole (SMX) and sulfamethazine (SMZ). Together with lab-scale sorption and biodegradation experiments, microbial degradation was found to be the most important removal mechanism for sulfonamides in VF-CWs. Sulfonamides addition increased bacterial alpha-diversity and changed microbial community structure. Moreover, antibiotics promoted antibiotic-resistant or -degrading bacteria. Bacillus, Geobacter and other seven genera were correlated with sulfonamides reduction under either aerobic or anaerobic condition. In summary, VF-CW is a suitable alternative for swine wastewater treatment, and biodegradation plays the key role in sulfonamides abatement. Main findings of the work. This was the first work to combine bacterial community analysis with microcosm experiments to uncover the major removal mechanism of sulfonamides in constructed wetlands.

Enhanced performance of tetracycline treatment in wastewater using aerobic granular sludge with in-situ generated biogenic manganese oxides

Wastewaters containing tetracycline (TC) are produced in many industries, and biotechnology is an economic way to treat it. In this work, aerobic granular sludge (AGS) modified with in-situ generated biogenic manganese oxides (BioMnOx), named after manganese-oxidizing AGS (Mn-AGS), was used to treat TC in wastewater. Comparisons between Mn-AGS and AGS indicated that Mn-AGS showed superior TC resistance and treatment results than AGS. The activity of Mn-AGS was not inhibited by TC content as high as 20 mg/L. Wastewater TC could be removed stably and efficiently (95.2 ± 0.8%) in the Mn-AGS reactors after 119 days' acclimation. Furthermore, TC may be first adsorbed on Mn-AGS sludge and then degraded by both microbial community and BioMnOx. TC adsorption could be greatly improved by increasing solution pH, which can be attributed to the increase in negatively charged TC species at high pHs. The microbial community changed greatly after TC exposure and some TC-resistant bacteria, such as Flavobacterium, were enriched in the final sludge. Moreover, the antibiotic resistance genes (ARGs) tetA, tetG, and tetX largely increased and the microorganisms were TC-resistant through efflux pumps and antibiotic inactivation mechanisms. This work suggests a new biological-chemical coupling strategy, Mn-AGS, to treat antibiotics in organic wastewater with high efficiency and stability.

Combined effects of electrical current and nonsteroidal antiinflammatory drugs (NSAIDs) on microbial community in a three-dimensional electrode biological aerated filter (3DE-BAF)

Three-dimensional electrode biological aerated filter (3DE-BAF) with particulate bioelectrode from lithium slag was used to simultaneously remove diclofenac and clofibric acid from the synthetic domestic sewage, and the combined effects of electrical current and nonsteroidal antiinflammatory drugs (NSAIDs) on microbial community was analyzed. The results indicated that (1) the average diclofenac and clofibric acid removal efficiency in the 3DE-BAF firstly increased, attained the peak of 79.40 ± 6.74% and 69.50 ± 6.26% at 0.35 A, and then decreased to 71.82 ± 4.90% and 55.92 ± 5.17% at 0.40 A, respectively; (2) the concentration of the diclofenac and clofibric acid in 3DE-BAF gradually decreased with the increase of reactor height; (3) the current intensity and space position affected the microbial structure at the different level; (4) at the optimum current intensity, Thiothrix, Flavobacteriaceae, Halothiobacillaceae, Hydrogenophaga, and Comamonadaceae accounted for the main bacterial community for removal diclofenac and clofibric acid in the 3DE-BAF.

Biodegradation of Amoxicillin, Tetracyclines and Sulfonamides in Wastewater Sludge

The removal of antibiotics from the aquatic environment has received great interest. The aim of this study is to examine degradation of oxytetracycline (OTC), tetracycline (TC), chlortetracycline (CTC), amoxicillin (AMO), sulfamethazine (SMZ), sulfamethoxazole (SMX), sulfadimethoxine (SDM) in sludge. Four antibiotic-degrading bacterial strains, SF1 (Pseudmonas sp.), A12 (Pseudmonas sp.), strains B (Bacillus sp.), and SANA (Clostridium sp.), were isolated, identified and tested under aerobic and anaerobic conditions in this study. Batch experiments indicated that the addition of SF1 and A12 under aerobic conditions and the addition of B and SANA under anaerobic conditions increased the biodegradation of antibiotics in sludge. Moreover, the results of repeated addition experiments indicated that the efficiency of the biodegradation of antibiotics using the isolated bacterial strains could be maintained for three degradation cycles. Two groups of potential microbial communities associated with the aerobic and anaerobic degradation of SMX, AMO and CTC in sludge were revealed. Twenty-four reported antibiotics-degrading bacterial genera (Achromobacter, Acidovorax, Acinetobacter, Alcaligenes, Bacillus, Burkholderia, Castellaniella, Comamonas, Corynebacterium, Cupriavidus, Dechloromonas, Geobacter, Gordonia, Klebsiella, Mycobacterium, Novosphingobium, Pandoraea, Pseudomonas, Rhodococcus, Sphingomonas, Thauera, Treponema, Vibrio and Xanthobacter) were found in both the aerobic and anaerobic groups, suggesting that these 24 bacterial genera may be the major antibiotic-degrading bacteria in sludge.

A Mild Method for Preparation of Highly Selective Magnetic Biochar Microspheres

We report the use of biochar and Fe₃O₄ nanoparticles as co-stabilizers for oil-in-water (o/w) Pickering emulsion. The emulsion is subsequently used to prepare magnetic tetracycline-imprinted biochar composite microspheres (MMIPMs) with good uniformity and high selectivity. The MMIPMs were characterized by scanning electron microscopy (SEM), Brunner-Emmet-Teller (BET) measurements, Fourier transform infrared spectrometry (FT-IR), X-ray diffraction (XRD), vibrating sample magnetometer (VSM) and thermogravimetry analysis (TGA). The adsorption properties of tetracycline to the MMIPMs were investigated using different adsorption experiments including adsorption kinetic experiment, equilibrium binding experiment, selectivity evaluation and competitive adsorption tests. The theoretical maximum adsorption capacity of the MMIPMs (15.45 mg g⁻¹) was greater than that of the raw biochar (2.10 mg g⁻¹) and non-imprinted biochar composite microspheres (3.39 mg g⁻¹) for tetracycline. Further, the MMIPMs were used as adsorbent for magnetic solid phase extraction (SPE) for the extraction of tetracycline present in drinking water, milk, fish and chicken samples. Under optimal conditions, the results showed good recovery yield ranging from 88.41% to 106.29% with a relative standard deviation (RSD) ranging from 0.35% to 6.83%, respectively.

Evolution of Antibiotic Resistance and the Relationship between the Antibiotic Resistance Genes and Microbial Compositions under Long-Term Exposure to Tetracycline and Sulfamethoxazole

The removal of antibiotics and widespread of antibiotic resistance genes (ARGs) have received continuous attention due to the possible threats to environment. However, little information is available on the evolution of antibiotic resistance and the relationship between ARGs and microbial communities under long-term exposure to sub-inhibitory concentrations of antibiotics. In our study, two laboratory-scale anoxic-aerobic wastewater treatment systems were established and operated for 420 days to investigate the evolution of antibiotic resistance under exposure of 5 mg·L⁻¹ tetracycline (TC) or 5 mg·L⁻¹ TC and 1 mg·L⁻¹ sulfamethoxazole (SMX). The average removal rates of TC and SMX were about 59% and 72%, respectively. The abundance of the main ARGs responsible for resistance to TC and SMX increased obviously after antibiotics addition, especially when TC and SMX in combination (increased 3.20-fold). The tetC and sul1 genes were the predominant genes in the development of TC and SMX resistance, in which gene sul1 had the highest abundance among all the detected ARGs. Network analysis revealed that under antibiotic pressure, the core bacterial groups carrying multiple ARGs formed and concentrated in about 20 genera such as Dechloromonas, Candidatus Accumulibacter, Aeromonas, Rubrivivax, in which intI1 played important roles in transferring various ARGs except sul3.