Design and performance of a novel direct Z-scheme NiGa2O4/CeO2 nanocomposite with enhanced sonocatalytic activity

Hybridization of Polymer-Encapsulated MoS2-ZnO Nanostructures as Organic-Inorganic Polymer Films for Sonocatalytic-Induced Dye Degradation

The development of environmentally friendly technology is vital to effectively address the issues related to environmental deterioration. This work integrates ZnO-decorated MoS2 (MZ) to create a high-performing PVDF-based PVDF/MoS2-ZnO (PMZ) hybrid polymer composite film for sonocatalytic organic pollutant degradation. An efficient synergistic combination of MZ was identified by altering the ratio, and its influence on PVDF was assessed using diverse structural, morphological, and sonocatalytic performances. The PMZ film demonstrated very effective sonocatalytic characteristics by degrading rhodamine B (RhB) dye with a degradation efficiency of 97.23%, whereas PVDF only degraded 17.7%. Combining MoS2 and ZnO reduces electron-hole recombination and increases the sonocatalytic degradation performance. Moreover, an ideal piezoelectric PVDF polymer with MZ enhances polarization to improve redox processes and dye degradation, ultimately increasing the degradation efficiency. The degradation efficiency of RhB was seen to decrease while employing isopropanol (IPA) and p-benzoquinone (BQ) due to the presence of reactive oxygen species. This suggests that the active species •O2- and •OH are primarily responsible for the degradation of RhB utilizing PMZ2 film. The PMZ film exhibited improved reusability without substantially decreasing its catalytic activity. The superior embellishment of ZnO onto MoS2 and effective integration of MZ into the PVDF polymer film results in improved degrading performance.

Sonocatalytic degradation of Bisphenol A from aquatic matrices over Pd/CeO2 nanoparticles: Kinetics study, transformation products, and toxicity

In this work, different ratios of palladium - cerium oxide (Pd/CeO2) catalyst were synthesized and characterized, while their sonocatalytic activity was evaluated for the degradation of the xenobiotic Bisphenol A (BPA) from aqueous solutions. Sonocatalytic activity expressed as BPA decomposition exhibited a volcano-type behavior in relation to the Pd loading, and the 0.25Pd/CeO2 catalyst characterized by the maximum Pd dispersion and lower crystallite size demonstrated the higher activity. Using 500 mg/L of 0.25 % Pd/CeO2 increased the kinetic constant for BPA destruction by more than two times compared to sonolysis alone (20 kHz at 71 W/L). Meanwhile, the simultaneous use of ultrasound and a catalyst enhanced the efficiency by 50.1 % compared to the sum of the individual processes, resulting in 95 % BPA degradation in 60 min. The sonocatalytic degradation of BPA followed pseudo-first-order kinetics, and the apparent kinetic constant was increased with ultrasound power and catalyst loading, while the efficiency was decreased in bottled water and secondary effluent. From the experiments that were conducted using appropriate scavengers, it was revealed that the degradation mainly occurred on the bubble/liquid interface of the formed cavities, while the reactive species produced from the thermal or light excitation of the prepared semiconductor also participated in the reaction. Five first-stage and four late-stage transformation products were identified using UHPLC/TOF-MS, and a pathway for the sonocatalytic degradation of BPA was proposed. According to ECOSAR software prediction, most transformation by-products (TBPs) present lower ecotoxicity than the parent compound, although some remain toxic to the indicators chosen.

Sonoactivated Nanomaterials: A potent armament for wastewater treatment

The world is currently facing a critical issue of water pollution, with wastewater being a major contributor. It comes from different types of pollutants, including industrial, medical, agricultural, and domestic. Effective treatment of wastewater requires efficient degradation of pollutants and carcinogens prior to discharge. Commonly used methods for wastewater treatment include filtration, adsorption, biodegradation, advanced oxidation processes, and Fenton oxidation, among others.The sonochemical effect refers to the decomposition, oxidation, reduction, and other reactions of pollutant molecules in wastewater upon ultrasound activation, achieving pollutants removal. Furthermore, the micro-flow effect generated by ultrasonic waves creates tiny bubbles and eddies. This significantly increases the contact area and exchange speed of pollutants and dissolved oxygen, thereby accelerating pollutant degradation. Currently, ultrasonic-assisted technology has emerged as a promising approach due to its strong oxidation ability, simple and cheap equipments, and minimal secondary pollution. However, the use of ultrasound in wastewater treatment has some limitations, such as high energy consumption, lengthy treatment time, limited water treatment capacity, stringent water quality requirements, and unstable treatment effects. To address these issues, the combination of enhanced ultrasound with nanotechnology is proposed and has shown great potential in wastewater treatment. Such a combination can greatly improve the efficiency of ultrasonic oxidation, resulting in an improved performance of wastewater purification. This article presents recent progress in the development of sonoactivated nanomaterials for enhanced wastewater disposal. Such nanomaterials are systematically classified and discussed. Potential challenges and future prospects of this emerging technology are also highlighted.

Preparation of high-crystalline and non-metal modified g-C3N4 for improving ultrasound-accelerated white-LED-light-driven photocatalytic performances

As a non-metallic organic semiconductor, graphitic carbon nitride (g-C3N4) has received much attention due to its unique physicochemical properties. However, the photocatalytic activity of this semiconductor faces challenges due to factors such as low electronic conductivity and limited active sites provided on its surface. The morphology and structure of g-C3N4, including macro/micro morphology, crystal structure and electronic structure can affect its catalytic activity. Non-metallic heteroatom doping is considered as an effective method to tune the optical, electronic and other physicochemical properties of g-C3N4. Here, we synthesized non-metal-doped highly crystalline g-C3N4 by one-pot calcination method, which enhanced the photocatalytic activity of g-C3N4 such as mesoporous nature, reduced band gap, wide-range photousability, improved charge carrier recombination, and the electrical conductivity was improved. Hence, the use of low-power white-LED-light illumination (λ ≥ 420 nm) and ultrasound (US) irradiation synergistically engendered the Methylene Blue (MB) mineralization efficiency elevated to 100% within 120 min by following the pseudo-first-order mechanism under the following condition (i.e., pH 11, 0.75 g L-1 of O-doped g-C3N4 and S-doped g-C3N4, 20 mg L-1 MB, 0.25 ml s-1 O2, and spontaneous raising temperature). In addition, the rapid removal of MB by sonophotocatalysis was 4 times higher than that of primary photocatalysis. And radical scavenging experiments showed that the maximum distribution of active species corresponds to superoxide radical [Formula: see text]. More importantly, the sonophotocatalytic degradation ability of O-doped g-C3N4 and S-doped g-C3N4 was remarkably sustained even after the sixth consecutive run.

Application of Photocatalysis and Sonocatalysis for Treatment of Organic Dye Wastewater and the Synergistic Effect of Ultrasound and Light

Organic dyes play vital roles in the textile industry, while the discharge of organic dye wastewater in the production and utilization of dyes has caused significant damage to the aquatic ecosystem. This review aims to summarize the mechanisms of photocatalysis, sonocatalysis, and sonophotocatalysis in the treatment of organic dye wastewater and the recent advances in catalyst development, with a focus on the synergistic effect of ultrasound and light in the catalytic degradation of organic dyes. The performance of TiO₂-based catalysts for organic dye degradation in photocatalytic, sonocatalytic, and sonophotocatalytic systems is compared. With significant synergistic effect of ultrasound and light, sonophotocatalysis generally performs much better than sonocatalysis or photocatalysis alone in pollutant degradation, yet it has a much higher energy requirement. Future research directions are proposed to expand the fundamental knowledge on the sonophotocatalysis process and to enhance its practical application in degrading organic dyes in wastewater.

A hydrangea-like nitrogen-doped ZnO/BiOI nanocomposite for photocatalytic degradation of tetracycline hydrochloride

The effectiveness of photocatalysts can be impacted by the high compounding efficiency of photogenerated carriers, which depends on the morphology of the photocatalyst. Here, a hydrangea-like N-ZnO/BiOI composite has been prepared for achieving efficient photocatalytic degradation of tetracycline hydrochloride (TCH) under visible light. The N-ZnO/BiOI exhibits a high photocatalytic performance, degrading nearly 90% of TCH within 160 min. After 3 cycling runs, the photodegradation efficiency remained above 80%, demonstrating its good recyclability and stability. The major active species at work are superoxide radicals (·O₂ ^-) and photo-induced holes (h⁺) in the photocatalytic degradation of TCH. This work provides not only a new idea for the design of photodegradable materials but also a new method for the effective degradation of organic pollutants.

Preparation of Ag3PO4/CoWO4 S-scheme heterojunction and study on sonocatalytic degradation of tetracycline

In this study, 0.6Ag3PO4/CoWO4 composites were synthesized by hydrothermal method. The prepared materials were systematically characterized by techniques of scanning electron microscope (SEM), transmission electron microscope (TEM), X-ray diffractometer (XRD), X-ray photoelectron spectroscopy (XPS), N2 adsorption/desorption, and UV-vis diffuse reflectance spectrum (DRS). Furthermore, the sonocatalytic degradation performance of 0.6Ag3PO4/CoWO4 composites towards tetracycline (TC) was investigated under ultrasonic radiation. The results showed that, combined with potassium persulfate (K2S2O8), the 0.6Ag3PO4/CoWO4 composites achieved a high sonocatalytic degradation efficiency of 97.89 % within 10 min, which was much better than bare Ag3PO4 or CoWO4. By measuring the electrochemical properties, it was proposed that the degradation mechanism of 0.6Ag3PO4/CoWO4 is the formation of S-scheme heterojunction, which increases the separation efficiency of electron-hole pairs (e--h+) and generates more electrons and holes, thereby enhancing the degradation activity. The scavenger experiments confirmed that hole (h+) was the primary active substance in degrading TC, and free radicals (OH) and superoxide anion radical (O2-) were auxiliary active substances. The results indicated that 0.6Ag3PO4/CoWO4 nanocomposites could be used as an efficient and reliable sonocatalyst for wastewater treatment.

Design of Z-scheme g-C3N4/BC/Bi25FeO40 photocatalyst with unique electron transfer channels for efficient degradation of tetracycline hydrochloride waste

High electron transfer rates and a higher number of electron transfer active sites play important roles in inhibiting the recombination of photogenerated electron-hole pairs. In the experiments described in this article, the g-C₃N₄/BC/Bi₂₅FeO₄₀ composite material was prepared to use biochar (BC) as the conductive channel. The presence of BC significantly increases the electron transfer rate due to its excellent electrical conductivity and can provide more electron transfer active sites. At the same time, BC provides a larger surface area and has a loose porous structure, which lead to excellent adsorption performance. Based on various characterization results, it was confirmed that the Z-scheme heterojunction was successfully constructed between g-C₃N₄ and Bi₂₅FeO₄₀. The photocatalytic experiment results showed that the degradation efficiency of g-C₃N₄/BC/Bi₂₅FeO₄₀ on the tetracycline hydrochloride (TCH) could reach 92.2% within 60 min. Parameters such as circulation stability, pH value of the solution and the amount of composite materials were studied. The synthesized composite material has good reusability and high efficiency in a wide pH range of 3-11. Its excellent photocatalytic activity is attributed to the formation of an effective Z-scheme heterostructure, as well as the rapid photoelectron transfer and excellent adsorption capacity of BC. This work provides a way to design new photocatalysts using semiconductor composite materials and BC materials.

Prussian blue modified CeO2 as a heterogeneous photo-Fenton-like catalyst for degradation of norfloxacin in water

The heterogeneous photo-Fenton-like process is emerging as a promising treatment of antibiotics-containing wastewater. The preparation of new efficient and stable catalysts is one of the research fields. A composite catalyst, prussian blue (PB) modified CeO₂ was prepared, characterized, and applied for photo-Fenton oxidation of norfloxacin (NOR) in this study. It was found that chemical doping of PB leaded to more oxygen vacancies and increased the surface area of CeO₂ obviously. PB/CeO₂ with more Ce³⁺ facilitated electron transfer between Fe³⁺/Fe²⁺ with Ce³⁺/Ce⁴⁺. PB could also improve the separation rate of photoexcited electron-hole pairs in CeO₂ nanostructures. When the doping ratio of PB and CeO₂ was 10%, PB/CeO₂ show the highest catalytic degradation ability and 88.93% of NOR could be degraded within 30 min. PB/CeO₂ composite showed well reactivity at the wide pH value range of 3-8. The reusable experiments and low iron dissolution with less than 1 mg/L indicated that PB/CeO₂ could be employed as an efficient heterogeneous photo-Fenton-like catalyst in organic contaminants degradation.

A high-efficiency mediator-free Z-scheme Bi2MoO6/AgI heterojunction with enhanced photocatalytic performance

A high-efficiency Z-scheme Bi₂MoO₆/AgI heterojunction was designed and fabricated via in situ growth of AgI on Bi₂MoO₆. Its photocatalytic activity was investigated with the degradation of malachite green (MG). After 40 min of visible light irradiation, near complete degradation of MG (20 mg/L) occurred when BA11 (Bi₂MoO₆:AgI = 1:1, 2.0 g/L) was present, while only 29.0% and 49.7% of the MG could be degraded in the presence of Bi₂MoO₆ and AgI, respectively. The excellent photocatalytic activity of BA11 results from strong visible light absorption and the low recombination efficiency of photogenerated electron-hole pairs induced by the formation of heterojunction. Density function theory (DFT) calculations revealed that the formation of built-in electric field at the interface between Bi₂MoO₆ and AgI facilitates the effective separation and transfer of photogenerated charge carriers. Results of reuse experiments indicated that the heterostructured photocatalyst has excellent stability. Radical scavenging experiments and electron spin resonance spectra showed that superoxide radicals (O₂^-) and hydroxyl radicals (OH) were the major reactive oxygen species in the photocatalytic system. The photocatalytic degradation pathway of MG was proposed based on the organic degradation intermediates detected. These findings demonstrate that the mediator-free Z-scheme Bi₂MoO₆/AgI heterojunction could serve as a promising photocatalyst in photocatalytic treatment of organic pollutants.

Magnetic separable zeolite-type ZSM-5/CdS nanorods/MoS2 nanoflowers/MnFe2O4 quaternary nanocomposites: synthesis and application of sonocatalytic activities

Magnetic zeolite-type ZSM-5/CdS nanorods/MoS₂ nanoflowers/MnFe₂O₄ quaternary nanocomposites were synthesized and used for the sonocatalytic degradation of organic pollutants.