Aerobic composting remediation of petroleum hydrocarbon-contaminated soil. Current and future perspectives

A comprehensive review on agricultural waste utilization through sustainable conversion techniques, with a focus on the additives effect on the fate of phosphorus and toxic elements during composting process

The increasing trend of using agricultural wastes follows the concept of "waste to wealth" and is closely related to the themes of sustainable development goals (SDGs). Carbon-neutral technologies for waste management have not been critically reviewed yet. This paper reviews the technological trend of agricultural waste utilization, including composting, thermal conversion, and anaerobic digestion. Specifically, the effects of exogenous additives on the contents, fractionation, and fate of phosphorus (P) and potentially toxic elements (PTEs) during the composting process have been comprehensively reviewed in this article. The composting process can transform biomass-P and additive-born P into plant available forms. PTEs can be passivated during the composting process. Biochar can accelerate the passivation of PTEs in the composting process through different physiochemical interactions such as surface adsorption, precipitation, and cation exchange reactions. The addition of exogenous calcium, magnesium and phosphate in the compost can reduce the mobility of PTEs such as copper, cadmium, and zinc. Based on critical analysis, this paper recommends an eco-innovative perspective for the improvement and practical application of composting technology for the utilization of agricultural biowastes to meet the circular economy approach and achieve the SDGs.

Revealing mechanisms of NH3 and N2O emissions reduction in the rapid bio-drying of food waste: Insights from organic nitrogen composition and microbial activity

Inevitably, aerobic biological treatment processes generate emissions of ammonia (NH3) and greenhouse gas (GHGs) emissions, especially nitrous oxide (N2O). The rapid bio-drying process (RBD) for food waste (FW) alleviates issues arising from its substantial growth. However, its emissions of NH3 and N2O remain unknown, and the correlation with nitrogen components in the substrate remains unclear, significantly impeding its widespread adoption. Here, the nitrogen loss and its mechanisms in RBD were investigated, and the results are as follows: The total emission of NH3 and N2O were1.42 and 1.16 mg/kg FW (fresh weight), respectively, achieving a 98 % reduction compared to prior studies. Structural equation modeling demonstrates that acid ammonium nitrogen (AN) decomposition chiefly generates NH3 in compost (p < 0.001). Strong correlation (p < 0.001) exists between amino acid nitrogen (AAN) and AN. In-depth analysis of microbial succession during the process reveals that the enrichment of Brevibacterium, Corynebacterium, Dietzia, Fastidiosipila, Lactobacillus, Mycobacterium, Peptoniphilus, and Truepera, are conducive to reducing the accumulation of AN and AAN in the substrate, minimizing NH3 emissions (p < 0.05). While Pseudomonas, Denitrobacterium, Nitrospira, and Bacillus are identified as key species contributing to N2O emissions during the process. Correlation analysis between physicochemical conditions and microbial succession in the system indicates that the moisture content and NO3- levels during the composting process provide suitable conditions for the growth of bacteria that contribute to NH3 and N2O emissions reduction, these enrichment in RBD process minimizing NH3 and N2O emissions. This study can offer crucial theoretical and data support for the resource utilization process of perishable organic solid waste, mitigating NH3 and GHGs emissions.

Effects of different organic substrate compositions on the decontamination of aged PAH-polluted soils through outdoor co-composting

The effects of different organic substrate compositions on the efficiency of outdoor co-composting as a bioremediation technology for decontaminating soil polluted by polycyclic aromatic hydrocarbons (PAHs) were investigated. Four different substrate mixtures and two different aged PAH-contaminated soils were used in a semi-pilot-scale experiment that lasted nearly 700 days. The two soils (A and B) differed concerning both the initial concentrations of the Ʃ16 US EPA PAHs (5926 vs. 369 mg kg-1, respectively) and the type of predominant PAH group by molecular weight. The experiments revealed that while the composition of the organic substrate had an impact on the rate of PAH degradation, it did not significantly influence the final extent of PAH degradation. Notably, the organic substrate consisting of green waste and wood chips (GW) was found to facilitate the most rapid rate of PAH degradation (first-order rate constant k = 0.033 ± 0.000 d-1 with soil A over the initial 42 days of the experiment and k = 0.036 ± 0.000 d-1 with soil B over the initial 56 days). Despite the differences in organic substrate compositions and types of soil being treated, PAH degradation levels exceeded at least 95% in all the treatments after more than 680 days of co-composting. Regardless of the composition, the removal of low- and medium- molecular-weight (2-4 rings) PAHs was nearly complete by the end of the experiment. Furthermore, high-molecular-weight PAHs (5 rings and more) were significantly degraded during co-composting, with reductions ranging from 54% to 79% in soil A and from 59% to 68% in soil B. All composts were dominated by Proteobacteria, Firmicutes, and Actinobacteria, with significant differences in abundance between soils. Genera with PAH degradation potentials were detected in all samples. The results of a battery of toxicity tests showed that there was almost no toxicity associated with the final composts.

Metagenomic analysis of a thermophilic bacterial consortium and its use in the bioremediation of a petroleum-contaminated soil

Biodegradation is difficult at high temperatures due to the limited capacity of microorganisms to survive and function outside their optimum temperature range. Here, a thermophilic petroleum-degrading consortium was enriched from compost at a temperature of 55 °C. 16S rDNA and metagenomic techniques were used to analyze the composition of the consortium and the mechanisms of degradation. The consortium degraded 17000 mg total petroleum hydrocarbons (TPHs) L-1 with a degradation efficiency of 81.5% in 14 days. The consortium utilized a range of substrates such as n-hexadecane, n-docosane, naphthalene and pyrene and grew well over a wide range of pH (4-10) and salinity (0-90 g L-1). The hydrocarbon-degrading extremophilic consortium contained, inter alia, (relative abundance >1%) Caldibacillus, Geobacillus, Mycolicibacterium, Bacillus, Chelatococcus, and Aeribacillus spp. Metagenomic analysis was conducted to discover the degradation and environmental tolerance functional genes of the consortium. Two alkane hydroxylase genes, alkB and ladA, were found. A microcosm study shows that the consortium promoted the bioremediation of soil TPHs. The results indicate that the consortium may be a good candidate for the high-temperature bioremediation of petroleum-contaminated soils.

Synergistic removal of total petroleum hydrocarbons and antibiotic resistance genes in Yellow River Delta wetlands contaminated soil composting regulated by biogas slurry addition

The interactive effects between the emerging contaminant antibiotic resistance genes (ARGs) and the traditional pollutant total petroleum hydrocarbons (TPHs) in contaminated soils remain unclear. The synergistic removal of TPHs and ARGs from composted contaminated soil, along with the microbial mechanisms driven by the addition of biogas slurry, have not yet been investigated. This study explored the impact of biogas slurry on the synergistic degradation mechanisms and bacterial community dynamics of ARGs and TPHs in compost derived from contaminated soil. The addition of biogas slurry resulted in a reduction of targeted ARGs and mobile genetic elements (MGEs) by 9.96%-95.70% and 13.32%-97.66%, respectively. Biogas slurry changed the succession of bacterial communities during composting, thereby reducing the transmission risk of ARGs. Pseudomonas, Cellvibrio, and Devosia were identified as core microorganisms in the synergistic degradation of ARGs and TPHs. According to the partial least squares path model, temperature and NO3- indirectly influenced the removal of ARGs and TPHs by directly regulating the abundance and composition of host microbes and MGEs. In summary, the results of this study contribute to the high-value utilization of biogas slurry and provide methodological support for the low-cost remediation of contaminated soils.

A critical review on characterization, human health risk assessment and mitigation of malodorous gaseous emission during the composting process

Composting has emerged as a suitable method to convert or transform organic waste including manure, green waste, and food waste into valuable products with several advantages, such as high efficiency, cost feasibility, and being environmentally friendly. However, volatile organic compounds (VOCs), mainly malodorous gases, are the major concern and challenges to overcome in facilitating composting. Ammonia (NH3) and volatile sulfur compounds (VSCs), including hydrogen sulfide (H2S), and methyl mercaptan (CH4S), primarily contributed to the malodorous gases emission during the entire composting process due to their low olfactory threshold. These compounds are mainly emitted at the thermophilic phase, accounting for over 70% of total gas emissions during the whole process, whereas methane (CH4) and nitrous oxide (N2O) are commonly detected during the mesophilic and cooling phases. Therefore, the human health risk assessment of malodorous gases using various indexes such as ECi (maximum exposure concentration for an individual volatile compound EC), HR (non-carcinogenic risk), and CR (carcinogenic risk) has been evaluated and discussed. Also, several strategies such as maintaining optimal operating conditions, and adding bulking agents and additives (e.g., biochar and zeolite) to reduce malodorous emissions have been pointed out and highlighted. Biochar has specific adsorption properties such as high surface area and high porosity and contains various functional groups that can adsorb up to 60%-70% of malodorous gases emitted from composting. Notably, biofiltration emerged as a resilient and cost-effective technique, achieving up to 90% reduction in malodorous gases at the end-of-pipe. This study offers a comprehensive insight into the characterization of malodorous emissions during composting. Additionally, it emphasizes the need to address these issues on a larger scale and provides a promising outlook for future research.

Remediation of petroleum-contaminated site soil by bioaugmentation with immobilized bacterial pellets stimulated by a controlled-release oxygen composite

Bioaugmentation techniques still show drawbacks in the cleanup of total petroleum hydrocarbons (TPHs) from petroleum-contaminated site soil. Herein, this study explored high-performance immobilized bacterial pellets (IBPs) embed Microbacterium oxydans with a high degrading capacity, and developed a controlled-release oxygen composite (CROC) that allows the efficient, long-term release of oxygen. Tests with four different microcosm incubations were performed to assess the effects of IBPs and CROC on the removal of TPHs from petroleum-contaminated site soil. The results showed that the addition of IBPs and/or CROC could significantly promote the remediation of TPHs in soil. A CROC only played a significant role in the degradation of TPHs in deep soil. The combined application of IBPs and CROC had the best effect on the remediation of deep soil, and the removal rate of TPHs reached 70%, which was much higher than that of nature attenuation (13.2%) and IBPs (43.0%) or CROC (31.9%) alone. In particular, the CROC could better promote the degradation of heavy distillate hydrocarbons (HFAs) in deep soil, and the degradation rates of HFAs increased from 6.6% to 33.2%-21.0% and 67.9%, respectively. In addition, the IBPs and CROC significantly enhanced the activity of dehydrogenase, catalase, and lipase in soil. Results of the enzyme activity were the same as that of TPH degradation. The combined application of IBPs and CROC not only increased the microbial abundance and diversity of soil, but also significantly enhanced the enrichment of potential TPH-biodegrading bacteria. M. oxydans was dominant in AP (bioaugmentation with addition of IBPs) and APO (bioaugmentation with the addition of IBPs and CROC) microcosms that added IBPs. Overall, the IBPs and CROC developed in this study provide a novel option for the combination of bioaugmentation and biostimulation for remediating organic pollutants in soil.

Insights into the response of electroactive biofilm with petroleum hydrocarbons degradation ability to quorum sensing signals

Bioelectrochemical technologies based on electroactive biofilms (EAB) are promising for petroleum hydrocarbons (PHs) remediation as anode can serve as inexhaustible electron acceptor. However, the toxicity of PHs might inhibit the formation and function of EABs. Quorum sensing (QS) is ideal for boosting the performance of EABs, but its potential effects on reshaping microbial composition of EABs in treating PHs are poorly understood. Herein, two AHL signals, C4-HSL and C12-HSL, were employed to promote EABs for PHs degradation. The start-times of AHL-mediated EABs decreased by 18-26%, and maximum current densities increased by 28-63%. Meanwhile, the removal of total PHs increased to over 90%. AHLs facilitate thicker and more compact biofilm as well as higher viability. AHLs enhanced the electroactivity and direct electron transfer capability. The total abundance of PH-degrading bacteria increased from 52.05% to 75.33% and 72.02%, and the proportion of electroactive bacteria increased from 26.14% to 62.72% and 63.30% for MFC-C4 and MFC-C12. Microbial networks became more complex, aggregated, and stable with addition of AHLs. Furthermore, AHL-stimulated EABs showed higher abundance of genes related to PHs degradation. This work advanced our understanding of AHL-mediated QS in maintaining the stable function of microbial communities in the biodegradation process of petroleum hydrocarbons.

Sequential oxidation-composting-phytoremediation treatment for the management of an oily sludge from petroleum refinery

Oily sludges are generated in large quantities in petroleum refinery wastewater treatment plants. Given their complex composition, they are classified as hazardous waste. Selecting a single treatment technique for their remediation is challenging. This work aims to assess the extent of composting followed by phytoremediation on an oily sludge from an API separator unit, pre-treated by chemical oxidation with alkaline activated persulfate (PS). 18% of total petroleum hydrocarbons (TPH) were determined by IR spectroscopy. The aliphatic hydrocarbon content was 4714 ± 250 ppm by GC-FID, and aromatics were not detectable, suggesting a high amount of non-chromatographable complex hydrocarbons. The density of generalist and hydrocarbon-degrading populations of the oily sludge estimated by quantitative polymerase chain reaction (qPCR) evidenced an autochthonous microbiota with hydrocarbon-degrading capacity. The oxidative treatment with PS removed 31% of the TPH determined by IR after 20 days. The significant reduction of the native bacterial community was counterbalanced by coupling a composting treatment. Co-composting the sludge with goat manure and oat straw produced, after a year, a 96% reduction in TPH content, regardless of the oxidative pretreatment. Organic matter transformation was evidenced by the decrease of dissolved organic carbon (DOC) and the variation in E4/E6 ratio. The matrices obtained of composting were used as substrates for phytoremediation for 4 months. Ryegrass seeds were planted in both PS-treated and untreated sludge substrates. The presence of the plant grown in the pre-oxidised and composted substrate resulted in a higher aerial biomass of ryegrass (67%), an increase in enzymatic activities, and higher concentration of DOC, although without evidence of additional dissipation of TPH. The dynamics of the bacterial communities of the different substrates generated during the biological treatment were analyzed by Illumina NovaSeq DNA sequencing of 16S rRNA amplicons. The findings mirrored a succession compatible with that described in contaminated matrices, but also in other non-contaminated ones. According to these findings, an organic matter transformation process occurred, which included the complex hydrocarbons of the oily sludge, resulting in an active substrate that promoted the retention of nutrients and water and provided the necessary support for plant development.

Characterization and treatment of oily sludge: A systematic review

Oily sludge is a prevalent hazardous waste generated in the petroleum industry, and effectively treating it remains a key challenge for the petroleum and petrochemical sectors. This paper provides an introduction to the origin, properties, and hazards of oil sludge while summarizing various treatment methods focused on reduction, recycling, and harmlessness. These methods include combustion, stabilization/solidification, oxidation and biodegradation techniques, solvent extraction, centrifugation, surfactant-enhanced oil recovery processes as well as freezing-thawing procedures. Additionally discussed are pyrolysis, microwave radiation applications along with electrokinetic method utilization for oily sludge treatment. Furthermore explored are ultrasonic radiation techniques and froth flotation approaches. These technologies have been thoroughly examined through discussions that analyze their process principles while considering influencing factors as well as advantages and disadvantages associated with each method. Based on the characteristics of oily sludge properties and treatment requirements, a selection methodology for choosing appropriate oily sludge treatment technology is proposed in this study. The development direction of processing technology has also been explored to provide guidance aimed at improving efficiency by optimizing existing processing technologies. The paper presents a comprehensive treatment method for oily sludge, ensuring that all the parameters meet the standard requirements.

Effects of Bacillus-based inoculum on odor emissions co-regulation, nutrient element transformations and microbial community tropological structures during chicken manure and sawdust composting

This study aims to evaluate whether different doses of Bacillus-based inoculum inoculated in chicken manure and sawdust composting will provide distinct effects on the co-regulation of ammonia (NH3) and hydrogen sulfide (H2S), nutrient conversions and microbial topological structures. Results indicate that the Bacillus-based inoculum inhibits NH3 emissions mainly by regulating bacterial communities, while promotes H2S emissions by regulating both bacterial and fungal communities. The inoculum only has a little effect on total organic carbon (TOC) and inhibits total sulfur (TS) and total phosphorus (TP) accumulations. Low dose inoculation inhibits total potassium (TK) accumulation, while high dose inoculation promotes TK accumulation and the opposite is true for total nitrogen (TN). The inoculation slightly affects the bacterial compositions, significantly alters the fungal compositions and increases the microbial cooperation, thus influencing the compost substances transformations. The microbial communities promote ammonium nitrogen (NH4+-N), TN, available phosphorus (AP), total potassium (TK) and TS, but inhibit nitrate nitrogen (NO3--N), TP and TK. Additionally, the bacterial communities promote, while the fungal communities inhibit the nitrite nitrogen (NO2--N) production. The core bacterial and fungal genera regulate NH3 and H2S emissions through the secretions of metabolic enzymes and the promoting or inhibiting effects on NH3 and H2S emissions are always opposite. Hence, Bacillus-based inoculum cannot regulate the NH3 and H2S emissions simultaneously.

Assessment of biodegradation of lignocellulosic fiber-based composites - A systematic review

Lignocellulosic fiber-reinforced polymer composites are the most extensively used modern-day materials with low density and better specific strength specifically developed to render better physical, mechanical, and thermal properties. Synthetic fiber-reinforced composites face some serious issues like low biodegradability, non-environmentally friendly, and low disposability. Lignocellulosic or natural fiber-reinforced composites, which are developed from various plant-based fibers and animal-based fibers are considered potential substitutes for synthetic fiber composites because they are characterized by lightweight, better biodegradability, and are available at low cost. It is very much essential to study end-of-life (EoL) conditions like biodegradability for the biocomposites which occur commonly after their service life. During biodegradation, the physicochemical arrangement of the natural fibers, the environmental conditions, and the microbial populations, to which the natural fiber composites are exposed, play the most influential factors. The current review focuses on a comprehensive discussion of the standards and assessment methods of biodegradation in aerobic and anaerobic conditions on a laboratory scale. This review is expected to serve the materialists and technologists who work on the EoL behaviour of various materials, particularly in natural fiber-reinforced polymer composites to apply these standards and test methods to various classes of biocomposites for developing sustainable materials.

Regulating the biodegradation of petroleum hydrocarbons with different carbon chain structures by composting systems

Composting can decrease petroleum hydrocarbons in petroleum contaminated soils, however the microbial degradation mechanisms and regulating method for biodegradation of petroleum hydrocarbons with different carbon chain structures in the composting system have not yet been investigated. This study analyzed variations of total petroleum hydrocarbon concentrations with C ≤ 16 and C > 16, Random Forest model was applied to identify the key microorganisms for degrading the petroleum hydrocarbon components with specific structure in biomass-amended composting. Regulating method for biodegradation of petroleum hydrocarbons with different carbon chain structures was proposed by constructing the influence paths of "environmental factors-key microorganisms- total petroleum hydrocarbons". The results showed that composting improved the degradation rate of C ≤ 16 fraction and C > 16 fraction of petroleum hydrocarbons by 67.88 % and 61.87 %, respectively. Analysis of the microbial results showed that the degrading bacteria of the C ≤ 16 fraction had degradation advantages in the heating phase of the compost, while the C > 16 fraction degraded better in the cooling phase. Moreover, microorganisms that specifically degraded C > 16 fractions were significantly associated with total nitrogen and nitrate nitrogen. The biodegradation of C ≤ 16 fraction was regulated by organic matter, moisture content, and temperature. The composting system modified by biogas slurry was effective in removing of petroleum hydrocarbons with different carbon chain structures in soil by regulating the metabolic potential of the 46 key microorganisms. This study given their expected importance to achieve the purpose of treating waste with waste and contributing to soil utilization as well as pollution remediation.

Techno-economic analysis of phytoremediation: A strategic rethinking

Phytoremediation is a cost-effective and environmentally sound approach, which uses plants to immobilize/stabilize, extract, decay, or lessen toxicity and contaminants. Despite successful evidence of field application, such as natural attenuations, and self-purification, the main barriers remain from a "promising" to a "commercial" approach. Therefore, the ultimate goal of this paper is to examine factors that contribute to phytoremediation's underutilization and discuss the real costs of phytoremediation when the time and land values are considered. We revisit mechanisms and processes of phytoremediation. We synthesize existing information and understanding based on previous works done on phytoremediation and its applications to provide the technical assessment and perspective views in the commercial acceptance of phytoremediation. The results show that phytoremediation is the most suitable for remote regions with low land values. Since these regions allow a longer period to be restored, land vegetation covers can be established in more or less time like natural attenuation. Since the length of phytoremediation is an inherent limitation, this inherent disadvantage limits its adoption in developed business regions, such as growing urban areas. Because high land values could not be recovered in the short term, phytoremediation is not cost-effective in those regions. We examine the potential measures that can enhance the performance of phytoremediation, such as soil amendments, and agricultural practices. The results obtained through review can clarify where/what conditions phytoremediation can provide the most suitable solutions at a large scale. Finally, we identify the main barriers and knowledge gaps to establishing a vegetation cover in large-scale applications and highlight the research priorities for increased acceptance of phytoremediation.

Combined assessment of health hazard and odour impact of soils at a contaminated site: a case study on a defunct pharmaceuticals factory in China

Surveys and assessments of contaminated sites primarily focus on hazardous pollutants in the soil with less attention paid to odorants. This makes the management of contaminated sites difficult. In this study, hazardous and odorous pollutants in the soil were assessed for a large site that was previously used for production of pharmaceuticals to determine the degree and characteristics of soil contamination at pharmaceutical production sites, for undertaking rational remediation measures. The main hazardous pollutants at the study site were triethylamine, n-butyric acid, benzo(a)pyrene (BaP), N-nitrosodimethylamine (NDMA), dibenzo(a,h)anthracene (DBA), total petroleum hydrocarbons (C10-C40) (TPH), and 1,2-dichloroethane; TEA, BA, and isovaleric acid (IC) were the main odorants. As the type and distribution of hazardous and odorous pollutants differ, it is necessary to separately assess the impact of these pollutants at a contaminated site. Soils in the surface layer pose significant non-carcinogenic (HI = 68.30) and carcinogenic risks (RT = 3.56E-5), whereas those in the lower layer only pose non-carcinogenic risks (HI > 7.43). Odorants were found at considerable concentrations both in the surface and lower layers, with the maximum concentrations being 29,309.91 and 41.27, respectively. The findings of this study should improve our understanding of soil contamination at former pharmaceutical production sites and should inform the assessment of the risks posed by contaminated sites, with problems associated with odour, and possible remediation strategies.

Enhanced degradation of petroleum in saline soil by nitrogen stimulation and halophilic emulsifying bacteria Bacillus sp. Z-13

Remediation of petroleum-contaminated soil is a widely concerned challenge. As an ecofriendly method, the performance improvement of indigenous microbial degradation is facing the bottleneck. In this study, a strain with high efficiency of petroleum degradation was isolated from the petroleum-contaminated soil and identified and named as Bacillus sp. Z-13. The strain showed the ability to produce lipopeptide surfactant which could improve 66% more petroleum hydrocarbons eluted. Strain Z-13 and its biosurfactant exhibited broad environmental adaptability to salinity (0-8%), pH (6-9) and temperature (15-45 °C). With the addition of strain Z-13 and the stimulation of NH4Cl, up to 59% of the petroleum in the contaminated soil was removed at the carbon to nitrogen ratio of 10. Microbial community analysis showed that petroleum-degrading bacteria, represented by Bacillus, became the dominant species at genus level and played an important role in the remediation. Additionally, ammonium stimulation facilitated both pathways of ammonium assimilation and nitrification in native microorganisms to achieve efficient degradation of petroleum hydrocarbons. This study could provide a promising approach for stable, environmental-friendly and efficient remediation of petroleum-contaminated soil.

Low-density polyethylene microplastics alter chemical properties and microbial communities in agricultural soil

Microplastic (MP) pollution in agricultural soils, resulting from the use of plastic mulch, compost, and sewage sludge, jeopardizes the soil microbial populations. However, the effects of MPs on soil chemical properties and microbial communities remain largely unknown. Here, we investigated the effects of different concentration levels (0, 0.1, 1, 3, 5, and 7%; w:w) of low-density polyethylene (LDPE) MPs on the chemical properties and bacterial communities of agricultural soil in an incubation study. The addition of LDPE MPs did not drastically change soil pH (ranging from 8.22 to 8.42). Electrical conductivity increased significantly when the LDPE MP concentrations were between 1 and 7%, whereas the total exchangeable cations (Na+, K+, Mg2+, and Ca2+) decreased significantly at higher LDPE MP concentrations (3-7%). The highest available phosphorus content (2.13 mg kg-1) was observed in 0.1% LDPE MP. Bacterial richness (Chao1 and Ace indices) was the lowest at 0.1% LDPE MP, and diversity indices (Shannon and Invsimpson) were higher at 0 and 1% LDPE MP than at other concentrations. The effect of LDPE MP concentrations on bacterial phyla remained unchanged, but the bacterial abundance varied. The relative abundance of Proteobacteria (25.8-33.0%) was the highest in all treatments. The abundance of Acidobacteria (15.8-17.2%) was also high, particularly in the 0, 0.1, and 1% LDPE MPs. With the increase in LDPE MP concentration, the abundance of Actinobacteria gradually increased from 7.80 to 31.8%. Our findings suggest that different MP concentration levels considerably alter soil chemical properties and microbial composition, which may potentially change the ecological functions of soil ecosystems.

Valorisation of food waste for valuable by-products generation with economic assessment

This study assessed the techno-economic feasibility of a biorefinery for valuable by-products (mainly hydrogen, ethanol and fertilizer) generation from food waste. The plant was designed to be built in Zhejiang province (China) with a processing capacity of 100 t food waste per day. It was found that the total capital investment (TCI) and annual operation cost (AOC) of the plant were US$ 7625549 and US$ 2432290.7 year^-1, respectively. After the tax, US$ 3141867.6 year^-1 of net profit could be reached. The payback period (PBP) was 3.5 years at a 7% discount rate. The internal rate of return (IRR) and return on investment (ROI) were 45.54% and 43.88%, respectively. Shutdown condition could happen with the feed of food waste less than 7.84 t day^-1 (2587.2 t year^-1) for the plant. This work was beneficial for attracting interests and even investment for valuable by-products generation from food waste in large scale.

Role of different natural materials in reducing nitrogen loss during industrial sludge composting: Modelling and optimization

In this study, the effects of pumice, expanded perlite, and expanded vermiculite on nitrogen loss were examined for industrial sludge composting using the Box-Behnken experimental design. The independent factors and their levels were selected as amendment type, amendment ratio, and aeration rate, and codded as x₁, x₂, and x₃ at 3 levels (low, center, and high). The statistical significance of independent variables and their interactions were determined at 95% confidence limits by Analysis of Variance. The quadratic polynomial regression equation produced to predict the responses was solved and the optimum values of the variables were predicted by analyzing the three-dimensional response surfaces plots. The optimum conditions for minimum nitrogen loss by the regression model were as pumice of amendment type, 40% of amendment ratio, and 6 L/min of aeration rate. In this study, it was observed that time-consuming and laborious laboratory work can be minimized with the Box-Behnken experimental design.

Assessment of oily sludge biodegradation in lab scale composting and slurry bioreactor by bacterial consortium

The present study aimed to investigate biodegradability of oily sludge in lab scale composting and slurry bioreactor using a potential bacterial consortium isolated from petroleum-contaminated sites. The consortium used in the study consisted of bacterial genera, including Enterobacter, Bacillus, Microbacterium, Alcaligenes Pseudomonas, Ochrobactrum, Micrococcus, and Shinella which were obtained after rigorous screening using different hydrocarbons. The meticulously designed lab scale composting experiments were carried out and showed that the combination of 10% oily sludge (A1) exhibited the highest total carbon (TC) removal, which was 40.33% within 90 days. To assess the composting experiments' efficiency, the first (k₁) and second (k₂) order rate constants were evaluated and was found to be 0.0004-0.0067 per day and second (k₂) 0.0000008-0.00005 g/kg. day respectively. To further enhance the biodegradation rate of A1 combination, a slurry bioreactor was used. The maximum total petroleum hydrocarbon (TPH) removals in a slurry bioreactor for cycle-I and -II were 48.8% and 46.5%, respectively, on the 78th and 140th days of the treatment. The results obtained in the study will be a technological platform for the development of slurry phase treatment of petroleum waste in a sustainable and eco-friendly manner.

A review on control and abatement of soil pollution by heavy metals: Emphasis on artificial intelligence in recovery of contaminated soil

"Save Soil Save Earth" is not just a catchphrase; it is a necessity to protect soil ecosystem from the unwanted and unregulated level of xenobiotic contamination. Numerous challenges such as type, lifespan, nature of pollutants and high cost of treatment has been associated with the treatment or remediation of contaminated soil, whether it be either on-site or off-site. Due to the food chain, the health of non-target soil species as well as human health were impacted by soil contaminants, both organic and inorganic. In this review, the use of microbial omics approaches and artificial intelligence or machine learning has been comprehensively explored with recent advancements in order to identify the sources, characterize, quantify, and mitigate soil pollutants from the environment for increased sustainability. This will generate novel insights into methods for soil remediation that will reduce the time and expense of soil treatment.

Ex situ bioremediation of diesel fuel-contaminated soil in two different climates

The petroleum industry is often faced with accidental spills and discharges that pollute valuable natural resources such as soil. The purpose of this study was to assess bioremediation potential of an on-site landfarming unit (LU), a highly economical solution that complies with the zero-waste policy, for bioremediation of the contaminated soil after an actual diesel fuel leakage in a fuel depot. The first aim was to evaluate the effects of different climates on hydrocarbon bioremediation. For this reason, a part of the contaminated soil was moved from the initial location with a sub-Mediterranean climate to an LU at another location with a temperate continental climate. Our results demonstrated that remediation in sub-Mediterranean climate is less effective than the remediation in a temperate continental climate. The second aim of this study was to evaluate the effect of different plant species on the microbial population during bioremediation. For that purpose, 365-day monitoring of phospholipid fatty acids (PLFA) was performed. Our results support the hypothesis that plant-assisted bioremediation can diminish toxic effects of diesel-polluted soil and that the changes in plant species during bioremediation cause changes in the microbial population.

Global Situation of Bioremediation of Leachate-Contaminated Soils by Treatment with Microorganisms: A Systematic Review

This systematic review presents the current state of research in the last five years on contaminants in soils, especially in leachates from solid waste landfills, with emphasis on biological remediation. In this work, the pollutants that can be treated by microorganisms and the results obtained worldwide were studied. All the data obtained were compiled, integrated, and analyzed by soil type, pollutant type, bacterial type, and the countries where these studies were carried out. This review provides reliable data on the contamination of soils worldwide, especially soils contaminated by leachate from municipal landfills. The extent of contamination, treatment objectives, site characteristics, cost, type of microorganisms to be used, and time must be considered when selecting a viable remediation strategy. The results of this study can help develop innovative and applicable methods for evaluating the overall contamination of soil with different contaminants and soil types. These findings can help develop innovative, applicable, and economically feasible methods for the sustainable management of contaminated soils, whether from landfill leachate or other soil types, to reduce or eliminate risk to the environment and human health, and to achieve greater greenery and functionality on the planet.

Investigation of biochar amendments on odor reduction and their characteristics during food waste co-composting

The odor emission such as ammonia (NH₃) and hydrogen sulfide (H₂S) during the composting process is a severe problem that adversely affects the environment and human health. Therefore, this study aimed to (1) evaluate the variation of physicochemical characteristics during the co-composting of food waste, and sawdust mixed biochar; (2) assess the efficiency of biochar-composting combined amendment materials for reducing odor emissions and their maturity. The raw materials including food waste (FW), straw dust (SD), and biochar (BC) were prepared and homogeneously mixed with the weight ranging from 120.0 kg to 135.8 kg with five treatments, BC0 (Control), BC1 (5 % biochar), BC2 (5 % distilled water washed biochar), BC3 (10 % biochar), BC4 (20 % biochar). Adding biochar could change physicochemical properties such as temperature, moisture, and pH during composting. The results indicated applying biochar-composting covering to minimalized NH₃ and H₂S aided by higher porous structure and surface functional groups. Among trials, biochar 20 % obtained the lowest NH₃ (2 ppm) and H₂S (3 ppm) emission on day 16 and stopping their emission on day 17. The NH₃/NH₄⁺ adsorption on large specific surface areas and highly porous micro-structure of biochar lead to reduced nitrogen losses, while nitrification (NH₄⁺ ➔ NO₂^- ➔ NO₃^-) may also contribute to nitrogen retention. The H₂S concentration decreased with increasing the biochar proportion, suggesting that biochar could reduce the H₂S emission. Correlation analysis illustrated that temperature, moisture, and oxygen are the most critical factors affecting H₂S and NH₃ emissions (p <0.05). The physicochemical properties and seed germination index indicated that the compost was mature without phytotoxicity. These novelty findings illustrated that the biochar amendment is an effective solution to reduce odor emission and enhances the maturity of compost mixture, which is promising to approach in real-scale conditions and could apply in agricultural fields.

Injection strategy for effective bacterial delivery in bioaugmentation scheme by controlling ionic strength and pore-water velocity

For the in-situ remediation of the contaminated subsurface environment, the injection of nutrients and microorganisms changes chemical and physical conditions, which control the delivery and immobilization of microorganisms. We investigated the injection strategy for effective bacterial delivery in a bioaugmentation scheme by controlling ionic strength (IS) and pore-water velocity (v). A set of bacterial transport tests was conducted using the saturated sand column to mimic the saturated subsurface environment. The effectiveness of the injection strategies was evaluated by applying solutions with different ionic strengths into the sand column with different pore-water velocities. The deposition and delivery of bacteria through the sand column were analyzed using the first-order deposition model. The deposition and delivery of bacteria injected by various strategies were numerically simulated considering the variable deposition rate. The breakthrough curves from column experiments revealed that the bacterial deposition on the sand surface was increased by an increase in the ionic strength and by a decrease in the pore-water velocities. The rates of bacterial deposition (k₁) on sand could be determined as a function of ionic strength and pore-water velocity, and it was applicable to simulate the delivery of bacteria under dynamic groundwater conditions. The numerical case study considering various injection strategies showed that the nutrient concentration controlled the bacterial delivery to the target area more significantly than the injection flow rate. Injection of bacterial solution with lower nutrient concentration could be increased the deposited bacterial concentration at the target point (S_tp) by 6.2-7.1 times higher. Short pulse injection with a high injection rate decreased S_tp by 67-78%. The efficiency of bacterial delivery (E_d) could be increased three times higher by lowering nutrient concentration in the injection solution. The process of evaluating the efficiency of bacterial delivery could be a prominent approach to determining the injection strategy for in-situ remediation considering variable conditions of a contaminated site.

Total petroleum hydrocarbons and influencing factors in co-composting of rural sewage sludge and organic solid wastes

Co-composting is an efficient strategy for collaborative disposal of multiple organic wastes in rural areas. In this study, we explored the co-composting of rural sewage sludge and other organic solid wastes (corn stalks and kitchen waste), with a focus on the variation of total petroleum hydrocarbons (TPH) during this process. 12% corn-derived biochar was applied in the composting (BC), with no additives applied as the control treatment (CK). The TPH contents of piles after composting ranged from 0.70 to 0.74 mg/g, with overall removal efficiencies of 35.6% and 61.1% for CK and BC, respectively. The results indicate that the addition of 12% biochar increased the rate of TPH degradation and accelerated the degradation process. 16s rDNA high-throughput sequencing was applied to investigate the biodiversity and bacterial community succession during the composting process. Diverse bacterial communities with TPH degradation functions were observed in the composting process, including Acinetobacter, Flavobacterium, Paenibacillus, Pseudomonas, and Bacillus spp. These functional bacteria synergistically degraded TPH, with cooperative behavior dominating during composting. Biochar amendment enhanced the microbial activity and effectively promoted the biodegradation of TPH. The physicochemical properties of the compost piles, including environmental factors (pH and temperature), nutrients (nitrogen, phosphorus, potassium), and humic substances produced in composting (humic acids and fulvic acids), directly and indirectly affected the variation in TPH contents. In conclusion, this work illustrates the variation in TPH content and associated influencing factors during co-composting of rural organic solid wastes, providing valuable guidance toward the further optimization of rural organic waste management.

Biodegradation of Different Types of Bioplastics through Composting—A Recent Trend in Green Recycling

In recent years, the adoption of sustainable alternatives has become a powerful tool for replacing petroleum-based polymers. As a biodegradable alternative to petroleum-derived plastics, bioplastics are becoming more and more prevalent and have the potential to make a significant contribution to reducing plastic pollution in the environment. Meanwhile, their biodegradation is highly dependent on their environment. The leakage of bioplastics into the environment and their long degradation time frame during waste management processes are becoming major concerns that need further investigation. This review highlights the extent and rate of the biodegradation of bioplastic in composting, soil, and aquatic environments, and examines the biological and environmental factors involved in the process. Furthermore, the review highlights the need for further research on the long-term fate of bioplastics in natural and industrial environments. The roles played by enzymes as biocatalysts and metal compounds as catalysts through composting can help to achieve a sustainable approach to the biodegradation of biopolymers. The knowledge gained in this study will also contribute to the development of policies and assessments for bioplastic waste, as well as provide direction for future bioplastics research and development.

Fabrication and response optimization of Moringa oleifera-functionalized nanosorbents for the removal of diesel range organics from contaminated water

The purpose of this research is to synthesize environmentally friendly nanosorbents for the novel adsorption of diesel range organics (DRO) from contaminated water. Central composite design (CCD) analysis of response surface methodology (RSM) was employed in a model fitting of the variables predicting the adsorption efficiency of Moringa oleifera-functionalized zerovalent iron particles (ZINPs) for the removal of DRO. The effects of the reaction parameters on the response were screened using 2⁴ factorial designs to determine the statistically significant independent variables. A quadratic model predicting the DRO adsorption efficiency of ZINPs with an F value of 276.84 (p value < 0.0001) was developed. Diagnostic plots show that the predicted values were in excellent agreement with actual experimental values (R² = 0.99). The maximum percentage removal of DRO of 92.6% was achieved after optimization, using the synthesized ZINPs after 8 h of contact between DRO substrates and ZINPs at pH of 8, the temperature of 25 °C, with an adsorbent dosage of 2 g/L and at composite desirability of 1. Characterization of ZINPs revealed the formation of quasi nanospheres and nanocubes with an average particle diameter of 50.9 ± 9.7, a crystallite size of 15.31 nm, a crystallinity index of 32.47% and a pore width of 75.69-88.59 nm. The adsorption equilibrium data modelling of ZINPs for adsorption of DRO was best described by Langmuir isotherm with the maximum monolayer coverage capacity of 7.194 mg/g. The separation factor [Formula: see text], indicated favourable adsorption. The adsorption kinetic data were consistent with pseudo-second-order kinetics indicating probable chemisorption.

Composting and green technologies for remediation of phthalate (PAE)-contaminated soil: Current status and future perspectives

Phthalate esters (PAEs) are hazardous organic compounds that are widely added to plastics to enhance their flexibility, temperature, and acidic tolerance. The increase in global consumption and the corresponding environmental pollution of PAEs has caused broad public concerns. As most PAEs accumulate in soil due to their high hydrophobicity, composting is a robust remediation technology for PAE-contaminated soil (efficiency 25%-100%), where microbial activity plays an important role. This review summarized the roles of the microbial community, biodegradation pathways, and specific enzymes involved in the PAE degradation. Also, other green technologies, including biochar adsorption, bioaugmentation, and phytoremediation, for PAE degradation were also presented, compared, and discussed. Composting combined with these technologies significantly enhanced removal efficiency; yet, the properties and roles of each bacterial strain in the degradation, upscaling, and economic feasibility should be clarified in future research.

Bacterial Communities Associated with Crude Oil Bioremediation through Composting Approaches with Indigenous Bacterial Isolate

In this study, we aim to investigate the efficiency of crude oil bioremediation through composting and culture-assisted composting. First, forty-eight bacteria were isolated from a crude oil-contaminated soil, and the isolate with the highest crude oil degradation activity, identified as Pseudomonas aeruginosa, was selected. The bioremediation was then investigated and compared between crude oil-contaminated soil (S), the contaminated soil composted with fruit-based waste (SW), and the contaminated soil composted with the same waste with the addition of the selected bacterium (SWB). Both compost-based methods showed high efficiencies of crude oil bioremediation (78.1% and 83.84% for SW and SWB, respectively). However, only a slight difference between the treatments without and with the addition of P. aeruginosa was observed. To make a clear understanding of this point, bacterial communities throughout the 4-week bioremediation period were analyzed. It was found that the community dynamics between both composted treatments were similar, which corresponds with their similar bioremediation efficiencies. Interestingly, Pseudomonas disappeared from the system after one week, which suggests that this genus was not the key degrader or only involved in the early stage of the process. Altogether, our results elaborate that fruit-based composting is an effective approach for crude oil bioremediation.

Evaluation of key microbial community succession and enzyme activities of nitrogen transformation in pig manure composting process through multi angle analysis

This experiment aimed to investigate changes in enzyme activity, microbial succession, and nitrogen conversion caused by different initial carbon-to-nitrogen ratios of 25:1, 35:1 and 20:1 (namely CK, T1 and T2) during pig manure composting. The results showed that the lower carbon-to-nitrogen ratio (T2) after composting retained 19.64 g/kg of TN which was more than 16.74 and 17.32 g/kg in treatments of CK and T1, respectively, but excessive conversion of ammonium nitrogen to ammonia gas resulted in nitrogen loss. Additional straw in T1 could play the role as a bulking agent. After composting, TN in T1 retained the most, and TN contents were 63.51 %, 67.34 % and 56.24 % in CK, T1 and T2, respectively. Network analysis indicated that many types of microorganisms functioned as a whole community at various stages of nitrogen cycle. This study suggests that microbial community structure modification might be a good strategy to reduce ammonium nitrogen loss.

Phytotoxicity complements chemical assessment for re-use and re-purposing of refinery wastes for soil amendment purposes after bioremediation

The objective of this study was to assess the suitability of onsite re-use of mature compost for landscaping and tree mulching, produced from the bioremediation of oily sludge from the refinery. Compost samples from the co-composting process were analysed for a range of contaminants, including a human health risk assessment fractionation (HRAF) of the remaining petroleum hydrocarbons, as well as a phytotoxicity test. The chemical characterisation demonstrated that the process removed more than 94% of the original petroleum hydrocarbons from the sludge, and the removal rates were high at 1155 mg/kg/day. The HRAF demonstrated no residual risks, posed by the petroleum hydrocarbons present in the compost to human health if used on-site when compared to the relevant Australian environmental investigation levels (ILs). However, the phytotoxicity assessment demonstrated that the compost was toxic to germinating lettuce. The gap in the literature this study addressed was to provide an estimate of the LD₅₀ and no effect concentration (NEC) for the compost using a standard plant bioassay containing a range of residual (aged) and bioremediated refinery process wastes, including petroleum hydrocarbons. The values estimated for LD₅₀ and NEC were approximately 125 and 43 mg/kg, respectively for compost containing residual petroleum hydrocarbon fractions, filling a gap in the current literature which has limited data on standard toxicity values that can be used in determining and informing commercial remediation strategies and their outcomes with aged sludges. Phytotoxicity was shown to be an important complement to conventional analyses and HRAF data when characterising the sludge, and understanding its potential for re-use. The novelty of the study is that it highlighted a gap in the complementary use of chemical and bioassay analyses for evaluating refinery waste remediation endpoints, which has potential for broader application to other projects.

Coupled effect of porous network and water content on the natural attenuation of diesel in unsaturated soils

The natural attenuation potential of a vadose zone against diesel is critical for optimizing remedial actions and determining groundwater vulnerability to contamination. Here, diesel attenuation in unsaturated soils was systematically examined to develop a qualitative relationship between physical soil properties and the natural attenuation capacity of a vadose zone against diesel. The uniformity coefficient (C_u) and water saturation (S_w, %) were considered as the proxies reflecting the degree of effects by porous network and water content in different soils, respectively. These, in turn, are related to the primary diesel attenuation mechanisms of volatilization and biodegradation. The volatilization of diesel was inversely proportional to C_u and S_w, which could be attributed to effective pore channels facilitating gas transport. Conversely, biodegradation was highly proportional to C_u under unsaturated conditions (S_w = 35-71%), owing to nutrients typically associated with fine soil particles. The microbial community in unsaturated soils was affected by S_w rather than C_u. The overall diesel attenuation including volatilization and biodegradation was optimized at S_w = 35% for all tested soils.

A review on the physicochemical and biological applications of biosurfactants in biotechnology and pharmaceuticals

Biosurfactants are the chemical compounds that are obtained from various micro-organisms and possess the ability to decrease the interfacial tension between two similar or different phases. The importance of biosurfactants in cosmetics, pharmaceuticals, biotechnology, agriculture, food and oil industries has made them an interesting choice in various physico-chemical and biological applications. With the aim of representing different properties of biosurfactants, this review article is focused on emphasizing their applications in various industries summarizing their importance in each field. Along with this, the production of recently developed chemically and biologically important biosurfactants has been outlined. The advantages of biosurfactants over the chemical surfactants have also been discussed with emphasis on the latest findings and research performed worldwide. Moreover, the chemical and physical properties of different biosurfactants have been presented and different characterization techniques have been discussed. Overall, the review article covers the latest developments in biosurfactants along with their physico-chemical properties and applications in different fields, especially in pharmaceuticals and biotechnology.

The nitrogen cycle and mitigation strategies for nitrogen loss during organic waste composting: A review

Composting is a promising technology to decompose organic waste into humus-like high-quality compost, which can be used as organic fertilizer. However, greenhouse gases (N₂O, CO₂, CH₄) and odorous emissions (H₂S, NH₃) are major concerns as secondary pollutants, which may pose adverse environmental and health effects. During the composting process, nitrogen cycle plays an important role to the compost quality. This review aimed to (1) summarizes the nitrogen cycle of the composting, (2) examine the operational parameters, microbial activities, functions of enzymes and genes affecting the nitrogen cycle, and (3) discuss mitigation strategies for nitrogen loss. Operational parameters such as moisture, oxygen content, temperature, C/N ratio and pH play an essential role in the nitrogen cycle, and adjusting them is the most straightforward method to reduce nitrogen loss. Also, nitrification and denitrification are the most crucial processes of the nitrogen cycle, which strongly affect microbial community dynamics. The ammonia-oxidizing bacteria or archaea (AOB/AOA) and the nitrite-oxidizing bacteria (NOB), and heterotrophic and autotrophic denitrifiers play a vital role in nitrification and denitrification with the involvement of ammonia monooxygenase (amoA) gene, nitrate reductase genes (narG), and nitrous oxide reductase (nosZ). Furthermore, adding additives such as struvite salts (MgNH₄PO₄·6H₂O), biochar, and zeolites (clinoptilolite), and microbial inoculation, namely Bacillus cereus (ammonium strain), Pseudomonas donghuensis (nitrite strain), and Bacillus licheniformis (nitrogen fixer) can help control nitrogen loss. This review summarized critical issues of the nitrogen cycle and nitrogen loss in order to help future composting research with regard to compost quality and air pollution/odor control.

Evaluate the role of biochar during the organic waste composting process: A critical review

Composting is very robust and efficient for the biodegradation of organic waste; however secondary pollutants, namely greenhouse gases (GHGs) and odorous emissions, are environmental concerns during this process. Biochar addition to compost has attracted the interest of scientists with a lot of publication in recent years because it has addressed this matter and enhanced the quality of compost mixture. This review aims to evaluate the role of biochar during organic waste composting and identify the gaps of knowledge in this field. Moreover, the research direction to fill knowledge gaps was proposed and highlighted. Results demonstrated the commonly referenced conditions during composting mixed biochar should be reached such as pH (6.5-7.5), moisture (50-60%), initial C/N ratio (20-25:1), biochar doses (1-20% w/w), improved oxygen content availability, enhanced the performance and humification, accelerating organic matter decomposition through faster microbial growth. Biochar significantly decreased GHGs and odorous emissions by adding a 5-10% dosage range due to its larger surface area and porosity. On the other hand, with high exchange capacity and interaction with organic matters, biochar enhanced the composting performance humification (e.g., formation humic and fulvic acid). Biochar could extend the thermophilic phase of composting, reduce the pH value, NH₃ emission, and prevent nitrogen losses through positive effects to nitrifying bacteria. The surfaces of the biochar particles are partly attributed to the presence of functional groups such as Si-O-Si, OH, COOH, CO, C-O, N for high cation exchange capacity and adsorption. Adding biochars could decrease NH₃ emissions in the highest range up to 98%, the removal efficiency of CH₄ emissions has been reported with a wide range greater than 80%. Biochar could absorb volatile organic compounds (VOCs) more than 50% in the experiment based on distribution mechanisms and surface adsorption and efficient reduction in metal bioaccessibilities for Pb, Ni, Cu, Zn, As, Cr and Cd. By applicating biochar improved the compost maturity by promoting enzymatic activity and germination index (>80%). However, physico-chemical properties of biochar such as particle size, pore size, pore volume should be clarified and its influence on the composting process evaluated in further studies.

Performance evaluation of rhamnolipids addition for the biodegradation and bioutilization of petroleum pollutants during the composting of organic wastes with waste heavy oil

Environmental pollution caused by petroleum hydrocarbons is being paid more and more attention worldwide. Surfactants are able to improve the solubility of petroleum hydrocarbons, but their effects on petroleum hydrocarbon degradation in composting systems are still unclear. In this study, the effects on microbial community succession were investigated by adding petroleum hydrocarbons and rhamnolipids during composting of organic wastes. The results showed that the compost and the addition of rhamnolipids could effectively reduce the petroleum hydrocarbon content with an efficiency of 73.52%, compared to 53.81% for the treatment without addition. Network analyses and Structural Equation Model suggested that there were multiple potential petroleum degraders microbes that might be regulated by nitrogen. The findings in this study can also provide an implication for the treatment of petroleum hydrocarbon pollutants from oil-polluted soil, and the technology can be potentially applied on an industrial scale in practice.

•

Effects of rhamnolipids on the removal of petroleum hydrocarbons were investigated

•

The relationship between PDM, APDM, and environmental factors was revealed

•

There was a significant correlation between nitrogen and PDM and APDM

•

Rhamnolipids are bio-resources for effectively removing petroleum hydrocarbons

Odors Emitted from Biological Waste and Wastewater Treatment Plants: A Mini-Review

In recent decades, a new generation of waste treatment plants based on biological treatments (mainly anaerobic digestion and/or composting) has arisen all over the world. These plants have been progressively substituted for incineration facilities and landfills. Although these plants have evident benefits in terms of their environmental impact and higher recovery of material and energy, the release into atmosphere of malodorous compounds and its mitigation is one of the main challenges that these plants face. In this review, the methodology to determine odors, the main causes of having undesirable gaseous emissions, and the characterization of odors are reviewed. Finally, another important topic of odor abatement technologies is treated, especially those related to biological low-impact processes. In conclusion, odor control is the main challenge for a sustainable implementation of modern waste treatment plants.

Microbial Involvement in the Bioremediation of Total Petroleum Hydrocarbon Polluted Soils: Challenges and Perspectives

Nowadays, soil contamination by total petroleum hydrocarbons is still one of the most widespread forms of contamination. Intervention technologies are consolidated; however, full-scale interventions turn out to be not sustainable. Sustainability is essential not only in terms of costs, but also in terms of restoration of the soil resilience. Bioremediation has the possibility to fill the gap of sustainability with proper knowledge. Bioremediation should be optimized by the exploitation of the recent “omic” approaches to the study of hydrocarburoclastic microbiomes. To reach the goal, an extensive and deep knowledge in the study of bacterial and fungal degradative pathways, their interactions within microbiomes and of microbiomes with the soil matrix has to be gained. “Omic” approaches permits to study both the culturable and the unculturable soil microbial communities active in degradation processes, offering the instruments to identify the key organisms responsible for soil contaminant depletion and restoration of soil resilience. Tools for the investigation of both microbial communities, their degradation pathways and their interaction, will be discussed, describing the dedicated genomic and metagenomic approaches, as well as the interpretative tools of the deriving data, that are exploitable for both optimizing bio-based approaches for the treatment of total petroleum hydrocarbon contaminated soils and for the correct scaling up of the technologies at the industrial scale.

Biodeterioration of Compost-Pretreated Polyvinyl Chloride Films by Microorganisms Isolated From Weathered Plastics

Polyvinyl chloride (PVC) is a petroleum-based plastic used in various applications, polluting the environment because of its recalcitrance, large content of additives, and the presence of halogen. In our case study, a new, two-stage biodegradation technology that combined composting process used for PVC pretreatment with a subsequent PVC attack by newly-isolated fungal and bacterial strains under SSF conditions was used for biodegradation of commercial PVC films. The novelty consisted in a combined effect of the two biodegradation processes and the use for augmentation of microbial strains isolated from plastic-polluted environments. First, the ability of the newly-isolated strains to deteriorate PVC was tested in individual, liquid-medium- and SSF cultures. Higher mass-reductions of PVC films were obtained in the former cultures, probably due to a better mass transfer in liquid phase. Using the two-stage biodegradation technology the highest cumulative mass-reductions of 29.3 and 33.2% of PVC films were obtained after 110 days with Trichoderma hamatum and Bacillus amyloliquefaciens applied in the second stage in the SSF culture, respectively. However, FTIR analysis showed that the mass-reductions obtained represented removal of significant amounts of additives but the PVC polymer chain was not degraded.

Bioremediation of Hydrocarbon-Polluted Soil: Evaluation of Different Operative Parameters

The bioremediation of soils polluted with hydrocarbons demonstrated to be a simple and cheap technique, even if it needs a long time. The current paper shows the application of statistical analysis, based on two factors involved in the biological process at several levels. We focus on the Design of Experiments (DOE) to determine the number and kind of experimental runs, whereas the use of the categorical factors has not been widely exploited up to now. This method is especially useful to analyze factors with levels constituted by categories and define the interaction effects. Particularly, we focused on the statistical analysis of (1) experimental runs carried out at laboratory scale (test M, in microcosm), on soil polluted with diesel oil, and (2) bench scale runs (test B, in biopile), on refinery oil sludge mixed with industrial or agricultural biodegradable wastes. Finally, the main purpose was to identify the factor’s significance in both the tests and their potential interactions, by applying the analysis of variance (ANOVA). The results demonstrate the robustness of the statistical method and its quality, especially when at least one of the factors cannot be defined with a numerical value.

Identifying the Active Phenanthrene Degraders and Characterizing Their Metabolic Activities at the Single-Cell Level by the Combination of Magnetic-Nanoparticle-Mediated Isolation, Stable-Isotope Probing, and Raman-Activated Cell Sorting (MMI-SIP-RACS)

Magnetic-nanoparticle-mediated isolation coupled with stable-isotope probing (MMI-SIP) is a cultivation-independent higher-resolution approach for isolating active degraders in their natural habitats. However, it addresses the community level and cannot directly link the microbial identities, phenotypes, and in situ functions of the active degraders at the single-cell level within complex microbial communities. Here, we used ¹³C-labeled phenanthrene as the target and developed a new method coupling MMI-SIP and Raman-activated cell sorting (RACS), namely, MMI-SIP-RACS, to identify the active phenanthrene-degrading bacterial cells from polycyclic aromatic hydrocarbon (PAH)-contaminated wastewater. MMI-SIP-RACS significantly enriched the active phenanthrene degraders and successfully isolated the representative single cells. Amplicon sequencing analysis by SIP, ¹³C shift of the single cell in Raman spectra, and the 16S rRNA gene from single cell sequencing via RACS confirmed that Novosphingobium was the active phenanthrene degrader. Additionally, MMI-SIP-RACS reconstructed the phenanthrene metabolic pathway and genes of Novosphingobium, including two novel genes encoding phenanthrene dioxygenase and naphthalene dioxygenase. Our findings suggested that MMI-SIP-RACS is a powerful method to efficiently and precisely isolate active PAH degraders from complex microbial communities and directly link their identities to functions at the single-cell level.

Toxicity and physicochemical parameters of composts including distinct residues from agribusiness and slaughterhouse sludge

Composting is useful for treatment of residues from agribusiness, but the potential toxicity of the final compost should be evaluated before its agricultural destination. The objective of this study was to evaluate the physicochemical characteristics and the toxicity of agribusiness residues using onion seeds as bioindicators. All tested treatments were composed by sludge from a swine slaughterhouse and sawdust. Besides the control, which included no additional materials, the other treatments included aviary bedding, rice husk and residue from tobacco industries as structuring materials. After 120 days of composting, for all treatments, the temperature inside the composting piles approached the environmental temperature, the physicochemical parameters indicated that the composts were stabilized and, except for the treatment including tobacco residues, that could be used for agriculture without impairing plant germination. Although the treatments including tobacco residues and rice husk showed evidence of cytotoxicity and genotoxicity at the beginning of the composting period, that was not observed for the treatment including aviary bedding. Such potential toxicity was not observed at the end of composting for any of the tested treatments.

Composting and its application in bioremediation of organic contaminants

This review investigates the findings of the most up-to-date literature on bioremediation via composting technology. Studies on bioremediation via composting began during the 1990s and have exponentially increased over the years. A total of 655 articles have been published since then, with 40% published in the last six years. The robustness, low cost, and easy operation of composting technology make it an attractive bioremediation strategy for organic contaminants prevalent in soils and sediment. Successful pilot-and large-scale bioremediation of organic contaminants, e.g., total petroleum hydrocarbons, plasticizers, and persistent organic pollutants (POPs) by composting, has been documented in the literature. For example, composting could remediate >90% diesel with concentrations as high as 26,315 mg kg^−a of initial composting material after 24 days. Composting has unique advantages over traditional single- and multi-strain bioaugmentation approaches, including a diverse microbial community, ease of operation, and the ability to handle higher concentrations. Bioremediation via composting depends on the diverse microbial community; thus, key parameters, including nutrients (C/N ratio = 25–30), moisture (55–65%), and oxygen content (O₂ > 10%) should be optimized for successful bioremediation. This review will provide bioremediation and composting researchers with the most recent finding in the field and stimulate new research ideas.

Adsorptive removal of crude petroleum oil from water using floating pinewood biochar decorated with coconut oil-derived fatty acids

The present investigation deals with the adsorptive removal of crude petroleum oil from the water surface using coconut oil-modified pinewood biochar. Biochar generated at higher pyrolysis temperature (700 °C) revealed higher fatty acid-binding efficiency responsible for the excellent hydrophobicity of the biochar. Fatty acids composition attached to the biochar produced at 700 °C was (mg g^-1 BC) lauric acid (9.024), myristic acid (5.065), palmitic acid (2.769), capric acid (1.639), oleic acid (1.362), stearic acid (1.114), and linoleic acid (0.130). Simulation of the experimental adsorption data of pristine and modified pinewood biochar generated at 700 °C offered the best fit to pseudo-first-order kinetics (R² > 0.97) and Langmuir isotherm model (R² > 0.99) based on the highest regression coefficients. Consequently, the adsorption process was mainly driven by surface hydrophobic interactions including π-π electron-donor-acceptor between electron-rich (π-donor) polycyclic aromatic hydrocarbons from the crude oil and biochar (π-acceptor). A maximum adsorption capacity (Q_max) of 5.315 g g^-1 was achieved by modified floating biochar within 60 min. Whereas the reusability testing revealed 49.39% and 51.40% was the adsorption efficiency of pristine and modified biochar at the fifth adsorption-desorption cycle.

Bacterial community progression during food waste composting containing high dioctyl terephthalate (DOTP) concentration

The overall dioctyl terephthalate (DOTP) degradation efficiency during food waste composting was 98%. The thermophilic phases contributed to 76% of the overall degradation efficiency, followed by the maturation phase (22%), then the mesophilic phase (0.7%). The thermophilic phase had the highest specific degradation rate of 0.149 d^-1. The progression of the bacterial community during the composting process was investigated to understand DOTP biodegradation. The results showed that the bacterial richness and the alpha diversity of the DOTP composting were similar to a typical composting process, indicating that the high concentration of DOTP did not hinder the thriving and evolution of the bacterial community. Additionally, Firmicutes was the most dominant at the phylum level, followed by Proteobacteria and Bacteroidetes. Bacilli was the most dominant class (70%) in the mesophilic phase, with the abundance decreasing thereafter in the thermophilic and maturation phase. Moreover, Lactobacillus sp. was the dominant species at the beginning of the experiment, which was probably responsible for DOTP biodegradation. The high removal efficiency observed in the maturation phase indicates that degradation occurs in all the composting phases, and that compost can be used to enhance natural attenuation. These findings provide a better understanding of the bacterial communities during biodegradation of DOTP and plasticizers via food waste composting and should facilitate the development of appropriate green bioremediation technologies.