Peroxymonosulfate-enhanced photocatalysis by carbonyl-modified g-C3N4 for effective degradation of the tetracycline hydrochloride

Mechanistic insights of PO43- functionalized carbon nitride homojunction hydrogels in photocatalytic-self-Fenton-peroxymonosulfate system for tetracycline degradation

In this study, metal-free PO43- enriched g-C3N4/g-C3N4 (PGCN) homojunction alginate 3D beads were developed for in-situ H2O2 production under visible light. Later, the photocatalytic-self-Fenton system was integrated with peroxymonosulfate for tetracycline degradation. Initially, the PO43- enriched g-C3N4 (PCN) and a homojunction composed of PCN and g-C3N4 (GCN) were prepared via the wet-impregnation method. Later, PGCN homojunction was formulated into 3D alginate beads through the blend-crosslinking method. The comprehensive characterization of the homojunction beads affirmed the closer contact between the semiconductors, alteration of the bandgap, faster channelization of electron-hole pairs, and improved separation of charge carriers that attributed to higher catalytic efficacy. The PGCN beads exhibited a maximum H2O2 production of 535 ± 12 µM under visible light irradiation for 60 min. The homojunction hydrogels displayed 99 ± 0.25 % tetracycline degradation in 20 min in the photocatalytic-self-Fenton-PMS system. The experimental studies also claimed a maximum chemical oxygen demand removal of 81 ± 3.6 % in 20 min with maximum reusability of beads up to 20 cycles. The Z-scheme electron migration mechanism is proposed based on the results aided by scavenger and electron spin resonance analysis. Overall, the as-synthesized alginate-supported homojunction-based photocatalytic-self-Fenton-peroxymonosulfate system is highly versatile and reusable for energy and environmental remediation.

Cerium oxide /Co-Co Prussian blue analogue composite catalyst for enhanced peroxymonosulfate activation for effective removal of tetracycline hydrochloride from water

In this paper, a novel CeO2/Co3[Co(CN)6]2 (CeO2/PBACo-Co) composite was prepared with co-precipitation and utilized to activate peroxymonosulfate (PMS) to eliminate tetracycline hydrochloride (TCH). Catalyst screening showed that the composite with a CeO2:PBACo-Co mass ratio of 1:5 (namely, 0.2-CeO2/PBACo-Co) had the best performance. The degradation efficiency of TCH in 0.2-CeO2/PBACo-Co/Oxone system was investigated. The experimental results illustrated that 98% of 50 mg/L TCH and 48.5% of TOC were degraded by 50 mg/L 0.2-CeO2/PBACo-Co and 400 mg/L Oxone within 120 min at 25 °C and initial pH 5.3. Recycling studies showed that the elimination rate of TCH can still achieve 85.8% after five cycles, suggesting that 0.2-CeO2/PBACo-Co composite processes good reusability. Trapping experiments and EPR tests revealed that the reaction system produced multiple active species (1O2, O2•-, SO4•-, and •OH). We proposed the catalytic mechanism of 0.2-CeO2/PBACo-Co for PMS activation, which mainly involves the promoted Co3+/Co2+ cycle by Ce3+ donated electrons. These results indicate that CeO2/PBACo-Co composite is an effective catalyst for wastewater remediation.

N,S,O triply-doped carbon with nanotubes-interwoven nanosheets encapsulated Co nanoparticles for robust antibiotic destruction via activating peroxymonosulfate

The development of facile and effective approaches to regulate the stability and reusability of metallic Co catalytic materials towards peroxymonosulfate (PMS) activation for remediating antibiotic pollutants remains challenging. In this study, we develop a one-step pyrolysis strategy to fabricate three-dimensional porous architecture assembled with N,S,O-codoped carbon nanotube-interwoven hierarchically porous carbon nanosheets encapsulated Co nanoparticles (Co@NSOC), which serve as chainmail catalysts for stable and reusable degradation of tetracycline hydrochloride (TCH) through PMS activation. The optimal Co@NSOC-700-activated PMS system presents an excellent removal efficiency of 94.1 % for TCH within 10 min and a high cycling efficiency of 92.9 % after eight cycles. The encapsulated structure, abundant catalytic sites, superior hydrophilicity and strong magnetism contribute to the high performance. Further investigation demonstrates that both radical and nonradical pathways contribute to the TCH destruction, and 1O2 is verified as the dominant reactive substance. The possible degradation pathways and the toxicity of intermediates for TCH are evaluated. This work offers an innovative structure design and surface modulation strategy to fabricate robust catalysts towards environmental remediation.

Electrochemically enhanced activation of Co3O4/TiO2 nanotube array anode for persulfate toward high catalytic activity, low energy consumption, and long lifespan performance

Advanced oxidation processes (AOPs) can directly degrade and mineralize organic pollutants (OPs) in water by generating reactive oxygen species with strong oxidizing ability. The development of advanced electrode materials with high catalytic performance, low energy consumption, no secondary pollution, and long lifespan has become a challenge that must be addressed in this field. A heterojunction catalyst loaded with Co3O4 on TDNAs (Co3O4/RTDNAs) was designed and constructed by a simple and efficient pyrolysis (Co3O4/TDNAs) and electrochemical reduction. Co3O4 can be uniformly distributed on the inner wall and surface of the TiO2 nanotubes, enhancing the specific surface area while forming a tight conductive interface with TiO2. This facilitates rapid transmission of electrons, thereby assisting Co3O4 in quickly activating PS to form reactive oxygen species. The Ti3+ and Ov generated in Co3O4/RTDNAs can significantly improve the electrocatalytic degradation of OPs. Also, the interface formed by Co3O4 and RTDNAs will effectively suppress Co2+ leakage, thereby reducing the risk of secondary pollution. When the reaction conditions were 1 mM PMS (PDS) and a current density of 5 mA/cm2 in the EA-PMS (PDS)/Co3O4/RTDNA system, 30 mg/L TC can achieve 83.24 % (81.89 %) removal in 120 min, with very low cobalt ion leaching, while the energy consumption was reduced significantly. Therefore, EA-PS/Co3O4/RTDNA system has strong stability and a high potential for treating the OPs in AOPs.

Efficient removal of tetracycline in water using modified eggplant straw biochar supported green nanoscale zerovalent iron: synthesis, removal performance, and mechanism

A novel NaOH modified eggplant straw biochar supported green nanoscale zerovalent iron (P-nZVI/ESBC) composite was synthesized and its removal performance and reaction mechanism for tetracycline (TC) in water were investigated. Multiple characterizations showed that the prepared P-nZVI/ESBC composite contained oxygen-containing functional groups (hydroxyl, carbonyl, and carboxyl groups) and Fe species (nZVI and its oxides). The dosage of composite, temperature, and solution pH significantly affected the removal capacity of the P-nZVI/ESBC composite for TC. The Avrami fraction-order kinetic model and Sips adsorption isotherm model can fit well the removal process of TC by the P-nZVI/ESBC composite, indicating that the adsorption behavior of TC involved multiple adsorption mechanisms and chemical adsorption might occur. The maximum adsorption capacity of the P-nZVI/ESBC composite for TC was 304.62 mg g-1. The adsorption and reductive degradation were the dominant mechanisms of TC removal by the P-nZVI/ESBC composite. This work offers abundant information on the application of eggplant straw to manufacture biochar-based composites for the efficient removal of antibiotic contaminants from aquatic environments.

Study on the dominant mechanism of direct hole oxidation for the photodegradation of tetracycline

Antibiotic contamination has a significant negative impact on China, one of the largest producers and consumers of antibiotics worldwide. In this study, a three-dimensional flower-like structure of CoFe-LDHs was used to efficiently degrade tetracycline (TC) in a system triggered by peroxymonosulfate (PMS) and exposed to visible light. After exploring the effects of different metal ratios, catalyst dosage, initial TC concentrations, and pH, the optimal reaction conditions were determined. In comparison to pure CoFe-LDHs, the TC elimination rate was dramatically increased by the addition of the PMS. The strong environmental resistance, excellent stability and reusability, and universal flexibility were shown. The quenching experiments and electron spin resonance detection showed that the creation of reactive oxygen species was facilitated by the synergistic transmission of electrons between the active bimetallic components. Further, photogenerated holes was the dominant oxidizing species, which contributed more to the degradation of TC. The potential degradation pathways and intermediate toxicity of TC were suggested. This work offers a new method dominated by photogenerated holes for efficiently removing TC effluent.

Localized electron-accepted yellow-emission carbon dots encapsulated in UiO-66 for efficient visible-light driven photocatalytic activity

Metal organic frameworks (MOFs) possess a large surface area, inherent porosity and high crystallinity. Nevertheless, they lack electron acceptors, which limit the exploitation of their photocatalytic properties. Carbon dots (CDs) known for excellent optical properties can serve as localized electron acceptors. As a novel hybrid nanomaterial, the structure of CDs@MOFs effectively facilitates charge separation and carrier transfer, bring about a marked improvement of photocatalytic activity. In this study, yellow-emission carbon dots (YCDs) were encapsulated within zirconium-based metal organic framework (UiO-66) via a dynamic adsorption method. Compared with blue carbon dots (BCDs), the YCDs@UiO-66 exhibited superior degradation performance. It demonstrates that incorporation of YCDs broadens the UV absorption range of UiO-66, thereby enhancing light utilization. The degradation efficiency of YCDs@UiO-66 was 92.6%, whereas UiO-66 alone achieved only 63.1%. Notably, the results of the radical quenching experiment and electron paramagnetic resonance (EPR) revealed that h+ and •O2- played a prominent role in the photodegradation of tetracycline hydrochloride (TCH). This study highlights that the introducing YCDs in MOFs-mediated photocatalytic reactions is a viable strategy to improve catalytic efficiency.

Exploration for cobalt/nitrogen-doped catalyst to creatinine degradation via peroxymonosulfate activation: toxicity evaluation, statistical modeling, and mechanisms study

Developing multifunctional catalysts applied in diversiform modes via advanced oxidation processes (AOPs) is a promising and attractive approach for organic pollution degradation. Herein, a novel hollow bamboo-like structural cobalt/nitrogen-doped carbonized material (CoC/N) was employed as a catalyst for AOPs, in which CoC/N was prepared in situ through calcining a Co-based coordination polymer. When CoC/N was utilized as a peroxymonosulfate (PMS) activator, the catalyst stood out prominent activities for effective CA oxidation. Furthermore, a five-level central composite rotatable design (CCRD) model describing CA decay as a function of PMS concentration, CoC/N dosage, and solution pH value was successfully constructed and engaged to explore the optimal operating conditions. Finally, the possible degradation mechanism of CA in CoC/N-PMS system was proposed by quantum chemistry calculation and LC/MS analysis. This work shed light on the structural morphology of the catalyst and its PMS synergy degradation pathway, which promotes its applications in miscellaneous pollutant degradation. A new Co/N-doped material was used to degrade unconventionality organic pollutant creatinine (CA) for the first time, in which the scientific approaches of five-level central composite rotatable design (CCRD) model, response surface methodology (RSM) and density function theory (DFT) were employed to evaluate the material performance and CA degradation pathway. The toxicity evaluation, statistical modeling and mechanisms study have been investigated meticulously.

Fabrication of 2D/1D Bi2WO6/halloysite nanotubes photocatalyst towards water purification: a support effect onin situconstruction and electron-hole separation

In this research work, a reusable and efficient 2D/1D heterogeneous structured photocatalyst based on amine-functionalized halloysite nanotubes (MHNTs) and Bi2WO6nanosheet (BWO) was prepared using a facile hydrothermal method for decomposing PPCPs under simulated sunlight. On the degradation of tetracycline hydrochloride (TCH), the effects of composite catalysts prepared under various conditions were discussed. The results showed that over BWO/MHNTs with a mass ratio was 3:1, the synthesizing temperature was 120 °C and the precursor pH value was 1, the TCH (10 mg l-1) degradation efficiency reached 100% after 1 h irradiation of simulated sunlight. Moreover, BWO/MHNTs composites kept good recovery and stable photocatalytic activity after 5 cycles. The excellent dispersion of Bi2WO6on the surface of clay minerals and the oxygen vacancy enhanced electron-hole separation may be responsible for the its high activity and stability. Futhermore, the radical capture test demonstrated that ·O-2was primarily responsible for the photodegradation of TCH. Thus, BWO/MHNTs composites exhibit a good application prospect in the field of sunlight-driven photocatalytic degradation towards PPCPs pollutants in water.

Activation of persulfate by heterogeneous nano zero-valent iron/halloysite nanotubes: reaction behavior, mechanism, and implication for tetracycline hydrochloride degradation

A novel composite (nZVI/HNTs) was prepared via incorporating nano zero-valent iron (nZVI) on halloysite nanotubes (HNTs) for degrading tetracycline hydrochloride (TCH) with existence of persulfate (PS). The adsorption process of nZVI/HNTs to TCH conformed to the Freundlich isotherm model and pseudo-second-order kinetic model, and its maximum adsorption capacity was 76.62 mg·g-1. Furthermore, the nZVI/HNTs + PS system exhibited satisfactory degradation efficiency (84.21%) for TCH, and stable nZVI/HNTs (Fe leaching < 0.001 mg·L-1) could be reused. When nZVI/HNTs dosage, PS dosage and temperature increased, TCH degradation could be enhanced. After four cycling, nZVI/HNTs + PS system had still 65.8% degradation for TCH. The quenching tests and EPR analysis evidenced that SO4•- was predominant instead of •OH in such system. Three possible pathways of TCH degradation were provided through the liquid chromatograph-mass spectrometer (LC-MS) determination. Meanwhile, the biological toxicity prediction analysis indicated that the nZVI/HNTs + PS system would be an environment friendly treatment method toward TCH pollution.

Role variations of MnOx on monoclinic BiVO4 (110)/(040) facets for enhanced Photo-Fenton reactions

Compared with traditional Fenton reaction, peroxymonosulfate based advanced oxidation processes (PMS-AOPs) are more effective to remove the organic pollutants in wastewater in a wider pH range. Herein, selective loading of MnO_x on monoclinic BiVO₄ (110) or (040) facets were achieved by photo-deposition method with addition of different Mn precursors and electron/hole trapping agents. MnO_x has good chemical catalysis activity for PMS activation, which can also enhance photogenerated charge separation, thus leading to enhanced activities than naked BiVO₄. The BPA degradation reaction rate constants of MnO_x(040)/BiVO₄ and MnO_x(110)/BiVO₄ system are 0.245 min^-1 and 0.116 min^-1, which are 6.45 and 3.05 times larger than that of naked BiVO₄, respectively. The roles of MnO_x on different facets are different, which will promote OER process on (110) facets and utilize the dissolved O₂ to produce O₂^•- and ¹O₂ more effectively on (040) facets. ¹O₂ is the dominated reactive oxidation species of MnO_x(040)/BiVO₄, while SO₄^•- and •OH play more important roles on MnO_x(110)/BiVO₄, which are proved by quenching experiments and chemical probe identifications, thus mechanism in MnO_x/BiVO₄-PMS-light system is proposed. The good degradation performance of MnO_x(110)/BiVO₄ and MnO_x(040)/BiVO₄ and mechanism theory may promote the application of photocatalysis in PMS based wastewater remediation.

Architecture and active motif engineering of N-CoS2@C yolk-shell nanoreactor for boosted tetracycline removal via peroxymonosulfate activation: Performance, mechanism and destruction pathways

Rational construction of yolk-shell architecture with regulated binding configuration is crucially important but challengeable for antibiotic degradation via peroxymonosulfate (PMS) activation. In this study, we report the utilization of yolk-shell hollow architecture consisted of nitrogen-doped cobalt pyrite integrated carbon spheres (N-CoS₂@C) as PMS activator to boost tetracycline hydrochloride (TCH) degradation. The creation of yolk-shell hollow structure and nitrogen-regulated active site engineering of CoS₂ endow the resulted N-CoS₂@C nanoreactor with high activity for PMS activating toward TCH degradation. Intriguingly, the N-CoS₂@C nanoreactor exhibits an optimal degradation performance with a rate constant of 0.194 min^-1 toward TCH via PMS activation. The ¹O₂ and SO₄^•- species are demonstrated as the dominant active substances for TCH degradation through quenching experiments and electron spin resonance characterization. The possible degradation mechanism, intermediates and degradation pathways for TCH removal over the N-CoS₂@C/PMS nanoreactor are unveiled. Graphitic N, sp²-hybrid carbon, oxygenated group (C-OH) and Co species are verified as the possible catalytic sites of N-CoS₂@C for PMS activation toward TCH removal. This study offers a unique strategy to engineer sulfides as highly efficient and promising PMS activators for antibiotic degradation.

Removal of Ciprofloxacin from Water by a Potassium Carbonate-Activated Sycamore Floc-Based Carbonaceous Adsorbent: Adsorption Behavior and Mechanism

In this study, a porous carbonaceous adsorbent was prepared from sycamore flocs by pyrolysis method and K₂CO₃ activation. The effects of preparative conditions of the material on its adsorptive property were explored. The optimal material (SFB_2-900) was obtained with a K₂CO₃/biochar mass ratio of 2:1 at an activation temperature of 900 °C, possessing a huge surface specific area (1651.27 m²/g). The largest adsorption capacity for ciprofloxacin on SFB_2-900 was up to 430.25 mg/g. The adsorption behavior was well described by the pseudo-second-order kinetic model and the Langmuir isothermal model. Meanwhile, this process was spontaneous and exothermic. The obtained material showed excellent adsorption performance in the conditions of diverse pH range, ionic strength, and water quality of the solution. The optimum adsorption conditions (pH = 7.01, dosage = 0.6 g/L, and C₀ = 52.94 mg/L) determined based on the response surface methodology were in accordance with the practical validation consequences. The good regeneration effect of SFB_2-900 manifested that this material had great practical application potential. Combining the experimental results and density functional theory calculation results, the adsorption mechanisms mainly included pore filling, π-π EDA interactions, electrostatic interactions, and H-bonds. The material could be regarded as a novel and high-efficiency adsorbent for antibiotics. Additionally, these findings also provide reference for the reuse of waste biomass in water treatment.

Removal of Tetracycline Hydrochloride by Photocatalysis Using Electrospun PAN Nanofibrous Membranes Coated with g-C3N4/Ti3C2/Ag3PO4

In order to improve the photocatalytic performance of g-C3N4, the g-C3N4/Ti3C2/Ag3PO4 S-type heterojunction catalyst was prepared by electrostatic assembly method, and then the g-C3N4/Ti3C2/Ag3PO4/PAN composite nanofiber membrane was prepared by electrospinning technology. The morphology and chemical properties of the nanofiber membrane were characterized by SEM, FTIR, and XRD, and the photocatalytic degradation of tetracycline hydrochloride (TC) in water by the nanofiber membrane was investigated. The results showed that g-C3N4/Ti3C2/Ag3PO4 could be successfully loaded on PAN and uniformly distributed on the surface of composite nanofiber membrane by electrospinning technology. Increasing the amount of loading and catalyst, lowering the pH value and TC concentration of the system were conducive to the oxidation and degradation of TC. The nano-fiber catalytic membrane had been recycled five times and found to have excellent photocatalytic stability and reusability. The study of catalytic mechanism showed that h+, •OH and •O2− were produced and participated in the oxidation degradation reaction of TC, and •O2− plays a major role in catalysis. Therefore, this work provides a new insight into the construction of high-performance and high-stability photocatalytic system by electrospinning technology.

Mitigating phytotoxicity of tetracycline by metal-free 8-hydroxyquinoline functionalized carbon nitride photocatalyst

Photooxidative removal of pharmaceuticals and organic dyes is an effective way to eliminate growing micropollutants. However, photooxidation often results in byproducts as secondary hazardous substances such as phytotoxins. Herein, we found that photooxidation of common antibiotic tetracycline hydrochloride (TCH) over a metal-free 8-hydroxyquinoline (8-HQ) functionalized carbon nitride (CN) photocatalyst significantly reduces the TCH phytotoxic effect. The phytotoxicity test of photocatalytic treated TCH-solution evaluated towards seed growth of Cicer arietinum plant model endowed natural root and shoot growth. This study highlights the conceptual insights in designing of metal-free photocatalyst for environmental remediation.

Quantitatively regulating the ketone structure of triazine-based covalent organic frameworks for efficient visible-light photocatalytic degradation of organic pollutants: Tunable performance and mechanisms

As promising visible-light-responsive photocatalysts, triazine-based covalent organic frameworks (CTFs) still suffer from broad bandgap and high electron-hole recombination. As such, different contents of electron-rich ketone group were introduced to CTFs (X % keto-CTF), aiming to clarify the mechanism of quantitatively regulating ketone for enhanced visible-light photocatalytic performance of CTFs. As ketone content increased, the bandgap narrowed, electron-hole recombination decreased, charge transfer and quantum yield increased. As a result, keto-CTF outperformed other keto-CTFs in visible-light photocatalytic degradation of tetracycline, and apparent rate constant of TC (k_obs) was 3.69 times higher than that of CTF. Importantly, ketone tuning induced varied types and concentrations of reactive species. Integrated with quantitative structure-activity relationships (QSARs) analysis and density functional theory (DFT) calculations, this study unravels how ketone content regulates bandgap structure of CTF, affects the contribution of varied reactive species, and quantitatively enhances the photocatalytic performance of CTFs. It also provides novel insights into the precise design and synthesis of CTFs-based catalyst structures for high-efficient visible-light photocatalytic degradation of organic pollutants.

Synergistic mechanism and degradation kinetics for atrazine elimination by integrated N-ZnO/g-C3N4/solar light/oxidant

In this study, an N-ZnO/g-C₃N₄ (g-N-Z) Z-scheme photocatalyst was constructed using hydrothermal and high-temperature calcination. X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), X-ray photoelectron spectroscopy (XPS), and other tests were employed to characterise the catalytic material. The results showed that after N-ZnO modification, the separation efficiency of the photoinduced charge pairs and the utilisation of sunlight in the composites were improved. The kinetics experiments indicated that the degradation of atrazine (ATZ) in the g-N-Z/PDS/solar system was significantly better than that in the PDS/solar system. Under the action of the g-N-Z/PDS/solar system, the degradation rate of ATZ reached 83.88%, whereas in the PDS/solar system, it was only 31.76%. In addition, it was found that increasing the PDS concentration, g-N-Z dosage, and solution acidity effectively accelerated the removal of ATZ. The presence of HCO₃^-/CO₃^2-, Cl^-, and natural organic matter (NOM) inhibited the oxidation efficiency of the g-N-Z/PDS/solar system. Moreover, the presence of multiple reactive oxygen species (ROS) was confirmed using radical scavenging experiments to determine the contribution of each active component. Twelve oxidation intermediates of ATZ were obtained via liquid chromatography-tandem mass spectrometry (LC-MS/MS), and the mechanism of enhanced ATZ degradation in the g-N-Z/PDS/solar system was proposed. Actual water and cyclic photocatalytic experiments further suggest that g-N-Z has good application value in water treatment.

An investigation on the adsorption and removal performance of a carboxymethylcellulose-based 4-aminophenazone@MWCNT nanocomposite against crystal violet and brilliant green dyes

The multistep chemical modification of carboxymethylcellulose (CMC) in the presence of 4-aminophenazone (A-PH) and multiwall carbon nanotubes (MWCNTs) has been successfully conducted. The environmental performance of this material has been thoroughly investigated. Crystal violet (CV) and brilliant green (BG) were eliminated by utilising a new hybrid nanocomposite material (A-PH-CMC/MWCNTs) from a simulated textile wastewater solution. Using SEM, EDX, XRD and FTIR spectroscopy methods, the detailed characterisation of A-PH-CMC/MWCNT nanocomposites was investigated. The results indicated that the adsorption capacity was dependent on six factors (e.g., contact duration, starting concentration, adsorbent mass, the effect of the solution pH, temperature and the effect of KNO₃). In addition, thermodynamic and regeneration studies have been reported. According to the theories of pseudo-second-order kinetics, the removal process involves chemical adsorption. The experimental results were best suited by the Langmuir model, in which maximum adsorption capacities of 20.83 and 22.42 mg g^-1 were predicted for the BG and CV dyes, respectively. The research is a preliminary case study demonstrating the excellent potential of A-PH-CMC/MWCNT nanocomposites as a material for CV and BG dye removal.

Recent Advances in g-C3N4-Based Materials and Their Application in Energy and Environmental Sustainability

Graphitic carbon nitride (g-C₃N₄), with facile synthesis, unique structure, high stability, and low cost, has been the hotspot in the field of photocatalysis. However, the photocatalytic performance of g-C₃N₄ is still unsatisfactory due to insufficient capture of visible light, low surface area, poor electronic conductivity, and fast recombination of photogenerated electron-hole pairs. Thus, different modification strategies have been developed to improve its performance. In this review, the properties and preparation methods of g-C₃N₄ are systematically introduced, and various modification approaches, including morphology control, elemental doping, heterojunction construction, and modification with nanomaterials, are discussed. Moreover, photocatalytic applications in energy and environmental sustainability are summarized, such as hydrogen generation, CO₂ reduction, and degradation of contaminants in recent years. Finally, concluding remarks and perspectives on the challenges, and suggestions for exploiting g-C₃N₄-based photocatalysts are presented. This review will deepen the understanding of the state of the art of g-C₃N₄, including the fabrication, modification, and application in energy and environmental sustainability.

Hydrolytically stable mixed ditopic linker based zirconium metal organic framework as a robust photocatalyst towards Tetracycline Hydrochloride degradation and hydrogen evolution

In the existing eco-crisis, designing and engineering an efficient as well as water stable photocatalyst for energy conversion and pollutant abatement remains crucial. In this regard, a mixed linker type zirconium metal organic framework (Zr-MOF) with terepthalic acid based ditopic linkers were utilized to design a single component photocatalyst through single step solvothermal method to utilize photons from visible light illumination towards hydrogen energy (H2) production and Tetracycline Hydrochloride (TCH) degradation. The one pot synthesized mixed linker based Zr-MOF displays visible light absorption through band gap tuning, superior exciton segregation and oxygen vacancy that cumulatively supports the enhancement in the photocatalytic output with respect to their pristine counterparts. Additionally, the X-ray photoelectron spectroscopy, optical and electrochemical studies strongly reinforces the above claims. The prepared mixed linker Zr-MOF showed superior photocatalytic H2 evolution performance of 247.88 µmol h-1 (apparent conversion efficiency; ACE = 1.9%) that is twice than its pristine Zr-MOFs. Moreover, in TCH degradation, the mixed linker MOF displays an enhanced efficacy of 91.8 % and adopts pseudo-first order type kinetics with a rate constant value of 0.032. Typically, the active species participating for the TCH photo-degradation follows the order of hydroxyl (OH.) < superoxide (O2.-) radicals. Consequently, the mixed linker Zr-MOF could be effectively used as a robust photocatalyst exhibiting boosted TCH degradation and H2 production.

Enhanced visible light-driven photodegradation of tetracycline by salicylic acid-modified graphitic carbon nitride and toxicity assessment

The tetracycline (TC) in water has led to serious concern. Graphitic carbon nitride (g-C₃N₄) photocatalysts were produced via copolymerization of mono-benzene ring-mediated precursors (urea, melamine, and dicyandiamide) involving salicylic acid (SA) for TC degradation. The SA-modified g-C₃N₄ samples showed improved visible light absorbance, transfer and separation of photogenerated electrons, and prospective photocatalytic application in TC degradation. As a result, the optimal SA-modified g-C₃N₄ (2 wt% of SA) using urea (CNU-SA-2) showed 2 times higher TC degradation than that of pristine g-C₃N₄. The process of TC degradation was evaluated by the reduction of antibacterial activity and extensively studied by varying the types of TC, initial pH values, co-existing anions, and natural organic materials. In addition, the catalyst could be reused for at least four cycles, indicating good reusability. The main active species were revealed to be h⁺ and ·O₂^- by scavenging experiments and electron spin resonance. The CNU-SA-2 photocatalyst and TC intermediates during degradation had no adverse impact on zebrafish embryos. This work could provide a design strategy and a perspective on the practical application of g-C₃N₄-based photocatalysts for the treatment of wastewater containing antibiotics.

Fluorescent carbon dots from water hyacinth as detection sensors for ferric ions: the preparation and optimisation using response surface methodology

The search for alternatives to chemicals from natural products as precursors for the preparation of highly doped carbon dots (CDs) remains challenging. Novel CDs (W-CDs) were synthesised using a one-step pyrolysis method with wastewater hyacinth as the sole carbon and nitrogen source at a mild temperature without using any surface-activating reagents or salt. The obtained W-CDs emitted strong blue fluorescence under 365 nm UV light excitation, with a quantum yield of 15.12%. The Box-Behnken design of the response surface methodology was applied to optimize the W-CD preparation conditions, including the reaction temperature, reaction time and weight of water hyacinths. The temperature was found to be the most important factor affecting the fluorescence intensity of the W-CDs. Additionally, the fluorescence sensor based on W-CDs demonstrated excellent selectivity towards ferric (Fe) ions, with a limit of detection of 2.35 μM. The fluorescent sensor was successfully applied for detecting Fe³⁺ in real water samples with a recovery of 97.80-103.10%. Hence, the pyrolysis of water hyacinth is proven to be a rapid, effective and green approach for CDs and provides a novel method for recycling water hyacinth.

Enhanced adsorption and catalytic degradation of antibiotics by porous 0D/3D Co3O4/g-C3N4 activated peroxymonosulfate: An experimental and mechanistic study

In this work, Co₃O₄/g-C₃N₄ catalyst with highly efficient adsorption and degradation of antibiotics was developed based on the combination of three-dimensional (3D) porous morphological controls of g-C₃N₄ and the loading of Co₃O₄ quantum dots (Co₃O₄ QDs). It was discovered that the catalyst can effectively activate peroxymonosulfate (PMS) through a non-photochemical path, and a high tetracycline elimination rate of 99.7% can be achieved within 18 min. The characterization and density functional theory calculation results demonstrated that the porous 3D structure can not only promote the substrate adsorption reaction but also provide large surface area and countless exposed active sites for catalytic reaction. The introduction of Co₃O₄ QDs lowered activation energy barrier and lead to high energy of PMS adsorption. More efficient charge migration between the catalyst and PMS further accelerated PMS activation. Thus, leading to the excellent catalytic performance. In addition, non-free radical mediated degradation mechanism of catalytic activity was also proposed. This work provides a scheme for designing novel and efficient PMS activators for the removal of abusive antibiotics from aqueous environments.

An outer membrane photosensitized Geobacter sulfurreducens-CdS biohybrid for redox transformation of Cr(VI) and tetracycline

Microbe-photocatalyst biohybrids, integrating the optimal attributes of whole-cell catalysts and nanometer photocatalysts, have emerged as a promising strategy for environment-associated applications. However, few such biohybrids have been tested for complex pollution systems. Herein, we constructed an outer membrane photosensitized Geobacter sulfurreducens (G. sulfurreducens)-CdS biohybrid, which enabled to generate stronger photocurrent in response to irradiation and meanwhile achieved an significant promotion for the redox transformation of Cr(VI) and tetracycline compared with that of bare G. sulfurreducens or CdS counterparts. Further analysis revealed that the outer membrane played a significant role in photoelectron transfer. Differential pulse voltammetry (DPV) tests demonstrated that CdS enhanced the catalytic activity of C-type cytochromes on the outer membrane under irradiation, resulting in the increase of electron-hole pairs separation efficiency. The possible degradation pathway of tetracycline was proposed based on determined intermediates, whose toxicities were well evaluated. Importantly, the toxicity of the final detected intermediates was apparently decreased. Overall, this work aims to explore the working mechanisms of the novel G. sulfurreducens-CdS biohybrid system and opens up a new avenue to purifying combined wastewater by microbe-photocatalyst biohybrids.

Synergistic adsorption and advanced oxidation activated by persulfate for degradation of tetracycline hydrochloride using iron-modified spent bleaching earth carbon

At present, tetracycline hydrochloride (TCH) is a widely used antibiotic, and is often detected in water, posing a serious harm to human and ecological health. In this study, spent bleaching earth (SBE) was pyrolyzed to obtain spent bleaching earth carbon (SBE@C) and the nano Fe⁰/SBE@C prepared after zero-valent iron loading was adopted to remove TCH in water for the first time. The combination of nano Fe⁰/SBE@C and PS, the strong adsorption of SBE@C coupled with the oxidation of free radicals could achieve TCH efficient removal. The effects of nano Fe⁰ load, nano Fe⁰/SBE@C dosage, solution initial pH, and PS/TCH molar ratio on TCH removal efficiency in nano Fe⁰/SBE@C + PS system were studied. The results indicate that the optimal reaction conditions are 5% nano Fe⁰ load, 0.2 g/L nano Fe⁰/SBE@C dosage, initial pH of 3, PS/TCH molar ratio of 100:1. Under these conditions, TCH removal efficiency could reach 91%. Meanwhile, response surface methodology (RSM) was applied to predict optimal value of reaction conditions. The removal efficiency corresponding to the predicted optimal conditions was consistent with the actual removal efficiency obtained from the experiment. Moreover, six reaction systems were tested, and TCH removal efficiency in the SBE@C + PS system was 22.6%. When nano Fe⁰ was loaded on SBE@C, TCH removal efficiency in Fe⁰/SBE@C + PS system increased to 78.2%, in which TCH was first adsorbed on the surface of nano Fe⁰/SBE@C, and then was degraded by the oxidation of SO₄^•- and •OH. Totally, the nano Fe⁰/SBE@C + PS system displayed excellent TCH removal efficiency, good stability and reusability, exhibiting a promise toward TCH removal.

High efficiency degradation of tetracycline by peroxymonosulfate activated with Fe/NC catalysts: Performance, intermediates, stability and mechanism

Carbon-based catalysts have the advantages of biological cleaning, eco-friendly and cost-effective in water treatment. While, nitrogen doped biochar promotes the development of non-radical peroxymonosulfate (PMS) activation in environmental remediation. Thus, three-dimensional sponge-like porous Fe and N co-doped biochar (Fe/CN-30) with high catalytic activity for PMS activation was synthesized. In a wide pH range (1-11), the Fe/CN-30 catalyst can efficiently degrade tetracycline (TC) with a small amount of PMS. The non-radical pathways are prominent in the TC decomposition process according to the quenching experiments, electron paramagnetic resonance (EPR) and gas chromatograph-mass spectrometer (GC-MS) analysis, in which the contribution of high-valent iron-oxo species (Fe(IV) = O) was dominant. X-ray photoelectron spectroscopy and reaction kinetic experiments confirmed that the coordination sites of Fe and N in the Fe/CN-30 are the reactive centers for TC degradation. Moreover, the successive addition of low concentration PMS into the system was confirmed to favor the PMS utilization, and the high selectivity of the Fe/CN-30 was confirmed by the analysis of pollutant structure. Furthermore, by-products of TC degradation in the Fe/CN-30/PMS system and the possible TC degradation pathways were proposed via liquid chromatography-mass spectrometry (LC-MS). Therefore, this study dedicates to providing new insights into the non-radical pathway-catalyzed AOPs.

MOF composites derived BiFeO3@Bi5O7I n-n heterojunction for enhanced photocatalytic performance

BiFeO₃is a photocatalyst with excellent performance. However, its applications are limited due to its wide bandgap. In this paper, MIL-101(Fe)@BiOI composite material is synthesized by hydrothermal method and then calcined at high temperature to obtain BiFeO₃@Bi₅O₇I composite material with high degradation capacity. Among them, an n-n heterojunction is formed, which improves the efficiency of charge transfer, and the recombination of light-generated electrons and holes promotes improved photocatalytic efficiency and stability. The result of photocatalytic degradation of tetracycline under visible light irradiation showed, BiFeO₃@Bi₅O₇I (1:2) has the best photodegradation effect, with a degradation rate of 86.4%, which proves its potential as a photocatalyst.

Insights into the mechanism of enhanced peroxymonosulfate degraded tetracycline using metal organic framework derived carbonyl modified carbon-coated Fe0

Tetracycline (TC) is a commonly used antibiotic that has gained wide spread notoriety owing to its high environmental risks. In this study, rich carbonyl-modified carbon-coated Fe⁰ was obtained by pyrolysis of MIL-100(Fe) in an Ar atmosphere, and used to activate peroxymonosulfate (PMS) for the degradation of tetracycline in water. The roles of Fe⁰, carbon and surface carbonyl on PMS activation were investigated. Fe⁰ continuously activated PMS, acted as a sustained-release source of Fe²⁺, and could effectively activate PMS to produce SO₄^•-, O₂^•- and •OH. Carbon was found to do responsible for electron transportation during the activation of PMS and slow down the oxidation of Fe⁰. The carbonyl group on the carbon surface layer was the active site of ¹O₂, which explains the enhanced performance for TC degradation. When Ca = 0.1 g/L and C₀ = 0.4 mM, TC degradation rate reached 96%, which was attributed to the synergistic effect of radicals (i.e., SO₄^•-, O₂^•-, •OH) and non-radical (i.e., ¹O₂). Finally, the degradation pathway was proposed by combining density functional theory (DFT) calculations with liquid chromatography-mass spectrometry (LC-MS), toxicities of the intermediate products were also evaluated. All results show that carbonyl-modified carbon-coated Fe⁰ possesses promising capacity for the removal of antibiotics from water.

N, S co-doped magnetic mesoporous carbon nanosheets for activating peroxymonosulfate to rapidly degrade tetracycline: Synergistic effect and mechanism

Heteroatoms doped carbon materials are widely used in the advanced oxidation process (AOPs) to remove organic pollutants in water due to the synergies effect between different heteroatoms. In this study, a novel kind of N, S co-doped magnetic mesoporous carbon nanosheets (Fe@NS-C) was prepared by simple one-step pyrolysis. Further, the influence of doping amount of S (L-methionine) and N (melamine) on catalytic activity was studied, the optimized sample Fe@NS-C-2-12/PMS showed a satisfying degradation ( 91.07%) for high concentrations of tetracycline (80 mg/L TC) in 10 min, which was attributed to the proper ratio of S content to N content (S(at.%)/ N(at.%)= 0.2097) in the sample could better play its synergistic effect by XPS analysis. The Fe@NS-C-2-12/ PMS system also exhibited satisfactory degradation effects in a wide pH range (3-10) and the existence of inorganic ions and humic acid. Then, the degradation mechanisms were mainly through the non-radical pathway (¹O₂ and electron transfer) and the major active sites were pyridinic N compared to thiophene S, CO, and Fe-N_x. This study could inspire the design of high-performance active and low-cost heteroatomic doping nano-magnetic catalysts for PMS-based waste treatment.

Visible-light-assisted peroxymonosulfate activation by metal-free bifunctional oxygen-doped graphitic carbon nitride for enhanced degradation of imidacloprid: Role of non-photochemical and photocatalytic activation pathway

Bifunctional oxygen-doped graphitic carbon nitride (OCN) was fabricated to activate peroxymonosulfate (PMS) for degrading imidacloprid (IMD). The modulated electronic structure of OCN promoted the adsorption, electron transfer, and formation of the redox site of PMS. The light absorption capacity, and the separation and migration speed of photogenerated carriers of OCN were increased. Consequently, 94.5% of IMD (3.0 mg/L) was removed by OCN-10/PMS process in 2.0 h. Compared with g-C₃N₄/PMS (0.048 h^-1), the IMD degradation rate constant of OCN-10/Vis/PMS system (1.501 h^-1) was increased by 30.3 times. The PMS oxidation on electron-deficient C atoms and holes, the PMS reduction around electron-rich O atoms and photogenerated electrons, and the multiple reactions of superoxide radical were the sources of the main active species singlet oxygen. Moreover, even under different pH conditions, coexisting anions, humic acid, and other neonicotinoid pesticides, the OCN-10/Vis/PMS system still showed acceptable applicability. Finally, mass spectrometry identified that hydroxylation and N-dealkylation of amines were the primary degradation pathways of IMD. This paper demonstrates an environmental-friendly combined activation strategy of PMS that can be operated day and night with low energy consumption, aiming to pave the way for developing metal-free photocatalysts for high-efficient environmental purification based on advanced oxidation coupling technology.

π-π stacking derived from graphene-like biochar/g-C3N4 with tunable band structure for photocatalytic antibiotics degradation via peroxymonosulfate activation

The severe pollution caused by antibiotics has raised serious concerns in recent decades. In this study, graphene-like Enteromorpha biochar modified g-C₃N₄ (BC/CN) was synthesized and applied to degrade tetracycline by activating PMS under visible light, obtaining around 90% removal rate within 1 h. The Enteromorpha biochar can provide electron-withdrawing groups to adjust the electronic structure of g-C₃N₄, and induces more π-π interaction to decline the recombination of photocarriers. The environmental adaptability of the BC/CN/PMS/vis system was confirmed by the TC degradation in different initial pH, coexisting ions, and natural organic materials. In most cases, the system maintained over 78% degradation rate. The kinetics and mechanism of the system indicating that ∙O₂^-, ¹O₂ contributed more to the TC photocatalytic degradation than ∙OH, SO₄∙^-, and h⁺. During the process, TC underwent serials hydroxylation, demethylation, and ring-opening processes, and produced more than 40 intermediates in three pathways. Moreover, the BC/CN/PMS/vis system was proved to have at least a 50% degradation rate for more tetracyclines and quinolone antibiotics with the same condition.

Construction of ternary CuO/CuFe2O4/g-C3N4 composite and its enhanced photocatalytic degradation of tetracycline hydrochloride with persulfate under simulated sunlight

In this study, a graphitic carbon nitride (g-C₃N₄) based ternary catalyst CuO/CuFe₂O₄/g-C₃N₄ (CCCN) is successfully prepared thorough calcination method. After confirming the structure and composition of CCCN, the as-synthesized composites are utilized to activate persulfate (PS) for the degradation of organic contaminant. While using tetracycline hydrochloride (TC) as pollutant surrogate, the effects of initial pH, PS and catalyst concentration on the degradation rate are systematically studied. Under the optimized reaction condition, CCCN/PS is able to give 99% degradation extent and 74% chemical oxygen demand removal in assistance of simulated solar light, both of which are apparently greater than that of either CuO/CuFe₂O₄ and pristine g-C₃N₄. The great improvement in degradation can be assignable to the effective separation of photoinduced carriers thanks to the integration between CuO/CuFe₂O₄ and g-C₃N₄, as well as the increased reaction sites given by the g-C₃N₄ substrate. Moreover, the scavenging trials imply that the major oxidative matters involved in the decomposition are hydroxyl radicals (•OH), superoxide radicals (•O₂^-) and photo-induced holes (h⁺).

Facile preparation of graphitic carbon nitride nanosheet/agar composite hydrogels for removal of tetracycline via the synergy of adsorption and photocatalysis

Compared with the BCN/agar composite hydrogel, the CNNS/agar 4 composite hydrogel exhibited a much higher photocatalytic activity for tetracycline degradation due to suppressive recombination of electrons and holes.