Self-propagating synthesis of Zn-loaded biochar for tetracycline elimination

Novel Approach to Photocatalytic Removal of Linezolid by Advanced Nano-Biochar/Bismuth Oxychloride Hybrid

Herein, we introduce an innovative nanohybrid material for advanced wastewater treatment, composed of Corchorus olitorius-derived biochar and bismuth oxychloride (Biochar/Bi12O17Cl2), demonstrated in a solar photoreactor. This work focuses on the efficient degradation of linezolid (LIN), a persistent pharmaceutical pollutant, utilizing the unique (photo)catalytic capabilities of the nanohybrid. Compared with its individual components, the biochar/Bi12O17Cl2 hybrid exhibits a remarkable degradation efficiency of 82.6% for LIN, alongside significant chemical oxygen demand (COD) and total organic carbon (TOC) mineralization rates of 81.3 and 75.8%, respectively. These results were achieved within 3 h under solar irradiation, using an optimal composite dose of 125 mg/L at pH 4.3 ± 0.45, with an initial COD and LIN concentrations of 1605 and 160.8 mg/L and TOC of 594.3 mg/L. The nanohybrid's stability across five cycles of use demonstrates its potential for repeated applications, with degradation efficiencies of 82.6 and 77.9% in the first and fifth cycles, respectively. This indicates the biochar/Bi12O17Cl2 composite's suitability as a sustainable and cost-effective solution for the remediation of heavily contaminated waters. Further, the degradation pathway proposed the degradation of all of the generated intermediates to a single-ring compound. Contributing to the development of next-generation materials for environmental remediation, this research underscores the critical role of nanotechnology in enhancing water quality and ecosystem sustainability and addressing the global imperative for clean water access and environmental preservation.

Interfacial interactions of polyethylene terephthalate microplastics and malachite green, tetracycline in aqueous environments

Polyethylene terephthalate microplastics (PET-MPs) are one of pivotal nondegradable emerging pollutant. Here the variation of the surface physicochemical characteristics of PET-MPs with UV irradiation aging and the adsorption behaviors of PET-MPs in malachite green (MG), tetracycline (TC) solution and the effect of coexisting Cu(II) were comparatively investigated. The yellowing, weakened hydrophobicity, and increased surface negative charge, crystallinity degree and oxygen-containing functional groups were manifested specifically by the aged PET-MPs. Different from the single system, the hydrophobic interaction and metal ion bridging complexation dominated the adsorption of MG and TC, respectively, in the binary solution. While in the ternary solution, cationic ion competition of Cu(II) with MG decreased its capture, and the formation of PET-Cu(II)-TC ternary complexes promoted TC adsorption. Moreover, PET-MPs could serve as an efficient vector for MG and TC in MG/TC/Cu(II) ternary system, indicating PET-MPs tend to carry more varieties in the complex environment, that may increase the environmental risk of PET-MPs.

Zinc and sulfur functionalized biochar as a peroxydisulfate activator via deferred ultraviolet irradiation for tetracycline removal

To enhance the degradation of tetracycline class (TC) residuals of high-concentration from pharmaceutical wastewater, a novel zinc (Zn) and sulfur (S) functionalized biochar (SC-Zn), as a peroxydisulfate (PDS) activator, was prepared by two-step pyrolysis using ZnSO4 accumulated water-hyacinth. Results showed that the removal rate of 50, 150, and 250 mg per L TC reached 100%, 99.22% and 94.83% respectively, by the SC-Zn/PDS system at a dosage of 0.3 g per L SC-Zn and 1.2 mM PDS, via the deferred ultraviolet (UV) irradiation design. Such excellent performance for TC removal was due to the synergetic activation of PDS by the biochar activator and UV-irradiation with biochar as a responsive photocatalyst. The functionalization of the co-doped Zn and S endowed the biochar SC-Zn with a significantly enhanced catalytic performance, since Zn was inferred to be the dominant catalytic site for SO4˙- generation, while S played a key role in the synergism with Zn by acting as the primary adsorption site for the reaction substrates. The employed SC-Zn/PDS/UV system had excellent anti-interference under different environmental backgrounds, and compared with the removal rate of TC by adsorption of SC-Zn, the increasing rate in the SC-Zn/PDS/UV system (18.75%) was higher than the sum of the increases in the SC-Zn/PDS (9.87%) and SC-Zn/UV systems (3.34%), furtherly verifying the systematic superiority of this synergy effect. This study aimed to prepare a high-performance functionalized biochar activator and elucidate the rational design of deferred UV-irradiation of PDS activation to efficiently remove high-concentration antibiotic pollutants.

Tetracycline decontamination from aqueous media using nanocomposite adsorbent based on starch-containing magnetic montmorillonite modified by ZIF-67

In the present study, starch/zeolitic imidazole framework-67 (ZIF-67) modified magnetic montmorillonite nanocomposite adsorbent to remove tetracycline (TC) as an emerging antibiotic-based contaminant from aqueous media. The surface properties of the adsorbents were investigated using FTIR, XRD, SEM, EDX-Map, XPS, TEM, BET, and VSM analysis. The specific surface area of MMT, St/MMT-MnFe2O4, and St/MMT-MnFe2O4-ZIF-67 magnetic nanocomposite samples were found to be 15.63, 20.54, and 588.41 m2/g, respectively. The influence of pH, adsorbent amount, initial TC concentration, temperature, contact time, and coexisting ions on TC elimination was explored in a batch adsorption system. The kinetic and equilibrium data were well matched with the pseudo-second-order and Langmuir isotherm models, respectively. The maximum monolayer adsorption capacities of TC were obtained to be 40.24, 66.1, and 135.2 mg/g by MMT, St/MMT-MnFe2O4, and St/MMT-MnFe2O4-ZIF-67 magnetic nanocomposite adsorbents, respectively. Also, thermodynamic studies illustrated that the TC adsorption process is exothermic and spontaneous. Furthermore, the magnetic nanocomposite adsorbent St/MMT-MnFe2O4-ZIF-67 showed good reusability and could be recycled for up to five cycles. This excellent adsorption performance, coupled with the facile separation of the magnetic nanocomposite, gave St/MMT-MnFe2O4-ZIF-67 a high potential for TC removal from aqueous media.

Heteroatom-modulated NiCo2O4 apparent energy activation of PMS for tetracycline removal: Mechanism and toxicity analysis

Heteroatom doping to reconfigure the electronic structure of heterogeneous catalysts is expected to lead to the development of advanced oxidation water purification materials with superior performance and greater stability. Herein, a series of catalysts with different elemental doping was developed by a simple and environmentally friendly one-step self-propagating combustion method to remove Tetracycline (TC). After S-doping, the normalized kinetic constant of TC was significantly increased from 30.49 to 159.41 min-1M-1 within 30 min, which is even higher than most recent heterogeneous catalysts. The prepared S-doped NiCo2O4 (NCO-S) exhibits an extremely promising catalytic performance for oxidation (92.8 %) and mineralization (65.9 %) of TC in a wide pH range (3-11). The resistance to interference is excellent for inorganic ions and even in real water samples. Quenching experiments, electron paramagnetic resonance (EPR), and electrochemical analyses demonstrated that the non-radical oxidation pathway, including electron transfer and 1O2, dominated the degradation process after S doping. It is speculated that possible intermediates and toxicological studies are discussed, finding that the overall degradation process is moving towards low toxicity to reveal prospects for large-scale applications. This work not only provides a way to remove TC, but may also inspire the design of more efficient and stable materials for water treatment and other applications.

Adsorption characterization of tetracycline antibiotics on alkali-functionalized rice husk biochar and its evaluation on phytotoxicity to seed germination

This work presented adsorption characteristics of tetracycline antibiotics (TCs) on KOH-functionalized rice husk biochar pyrolyzed at 700 °C (KBC700) and evaluation on phytotoxicity of TCs-adsorbed aqueous phase to seed germination. Specifically, KBC700 gained eightfold rise in specific surface area by KOH activation. Predominant monolayer chemisorption helped KBC700 control TCs, and spontaneous and exothermic features were identified by thermodynamic studies. KBC700 could efficiently work in a wide pH range (4.5 ~ 9.5), as well as in simulated eutrophic water and co-existing cationic solution. Humic acid exerted negative impact on TCs disposal. Outstanding regeneration capability and stability were also found during adsorption-desorption cycles. Mechanism discussion implied predominant pore filling and π-π interaction accompanied by hydrogen bonding and electrostatic interaction involved in TCs-removal process. Importantly, less phytotoxicity to seed germination was found in TCs-adsorbed aqueous phase. Collectively, these findings contribute to adsorption properties recognition and subsequent application for KOH-modified rice rusk biochar in environmental TCs remediation.

Removal of tetracycline in aqueous solution by iron-loaded biochar derived from polymeric ferric sulfate and bagasse

In this study, the tetracycline (TC) removal performance of iron-loaded biochar (BPFSB) derived from sugarcane bagasse and polymerized iron sulfate was investigated, and the mechanism of TC removal was also explored by study of isotherms, kinetics and thermodynamics and characterization of fresh and used BPFSB (XRD, FTIR, SEM and XPS). The results showed that under optimized conditions (initial pH 2; BPFSB dosage 0.8 g·L-1; TC initial concentration 100 mg·L-1; Contact time 24 h; temperature 298 K), the removal efficiency of TC was as high as 99.03%. The isothermal removal of TC followed well the Langmuir, Freundlich, and Temkin models, indicating that multilayer surface chemisorption dominated the TC removal. The maximum removal capacity of TC by BPFSB at different temperatures was 185.5 mg·g-1 (298 K), 192.7 mg·g-1 (308 K), and 230.9 mg·g-1 (318 K), respectively. The pseudo-second-kinetic model described the TC removal better, while its rate-controlling step was a combination of liquid film diffusion, intraparticle diffusion, and chemical reaction. Meanwhile, TC removal was also a spontaneous and endothermic process, during which the randomness and disorder between the solid-liquid interface was increased. According to the characterization of BPFSBs before and after TC removal, H-bonding and complexation were the major interactions for TC surface adsorption. Furthermore, BPFSB was efficiently regenerated by NaOH. In summary, BPFSB had the potential for practical application in TC removal.

Effect of endogenetic dissolved organic matter on tetracycline adsorption by biochar

The endogenetic biochar-derived dissolved organic matter (BDOM) might interact with pollutants in the environment. In this study, tetracycline (TC) was selected as the representative pollutant, and corn straw biochar (pyrolyzed at 300 °C) was used as the adsorbent. Through batch experiments and microscopic characterization, the releasing kinetics of BDOM and its effect on TC adsorption on biochar were investigated. The results showed that BDOM with weaker aromaticity and higher molecular weight was preferentially released. BDOM release led to the decrease of specific surface area (from 4.02 to 1.83 m²/g), mesopore number, and aromaticity of biochar (H/C increased from 0.80 to 0.91) and consequently weakened the pore filling of TC on biochar, hydrophobic interaction, and π-π EDA (electron donor receptor) interaction between biochar and TC. In addition, the released BDOM could form a complex with TC in solution to prevent TC adsorption on biochar. Overall, the change in the structural properties of biochar caused by BDOM release had a greater impact on the inhibition of TC adsorption than that of BDOM and TC complexation in this study. Through EEM-PRARFAC, BDOM contained about 63% humic acid-like fluorescent component and 37% tryptophan-like fluorescent component; the former (logK_b values were 7.31 and 6.48, respectively) had a stronger binding strength with TC than the latter (logK_b was 6.45). The findings of this study could provide some useful evidence for the removal of organic pollutants in soil and water environments and biochar application in pollution remediation.

Magnetic CuFe2O4 nanoparticles anchored on N-doped carbon for activated peroxymonosulfate removal of oxytetracycline from water: Radical and non-radical pathways

In this work, magnetic CuFe₂O₄ was prepared for the removal of oxytetracycline (OTC) by a self-propagating combustion synthesis method. Almost complete degradation (99.65%) of OTC was achieved within 25 min at [OTC]₀ = 10 mg/L, [PMS]₀ = 0.05 mM, CuFe₂O₄ = 0.1 g/L under pH = 6.8 at 25 °C for deionized water. Specially, the addition CO₃^2- and HCO₃^- induced the CO₃•^- appearance enhancing the selective degradation to electron-rich OTC molecule. The prepared CuFe₂O₄ catalyst exhibited desirable OTC removal rate (87.91%) even in hospital wastewater. The reactive substances were analyzed by free radical quenching experiments and electron paramagnetic resonance (EPR), and the results demonstrated that ¹O₂ and •OH were the main active substances. Liquid chromatography-mass spectrometry (LC-MS) was used to analyze the intermediates produced during the degradation of OTC and thus to speculate on the possible degradation pathways. Ecotoxicological studies were conducted to unveil large-scale application prospect.

Efficient Adsorption of Tebuconazole in Aqueous Solution by Calcium Modified Water Hyacinth-Based Biochar: Adsorption Kinetics, Mechanism, and Feasibility

The application of fungicides (such as tebuconazole) can impose harmful impacts on the ecosystem and humans. In this study, a new calcium modified water hyacinth-based biochar (WHCBC) was prepared and its effectiveness for removing tebuconazole (TE) via adsorption from water was tested. The results showed that Ca was loaded chemically (CaC₂O₄) onto the surface of WHCBC. The adsorption capacity of the modified biochar increased by 2.5 times in comparison to that of the unmodified water hyacinth biochar. The enhanced adsorption was attributed to the improved chemical adsorption capacity of the biochar through calcium modification. The adsorption data were better fitted to the pseudo-second-order kinetics and the Langmuir isotherm model, indicating that the adsorption process was dominated by monolayer adsorption. It was found that liquid film diffusion was the main rate-limiting step in the adsorption process. The maximum adsorption capacity of WHCBC was 40.5 mg/g for TE. The results indicate that the absorption mechanisms involved surface complexation, hydrogen bonding, and π-π interactions. The inhibitory rate of Cu²⁺ and Ca²⁺ on the adsorption of TE by WHCBC were at 4.05-22.8%. In contrast, the presence of other coexisting cations (Cr⁶⁺, K⁺, Mg²⁺, Pb²⁺), as well as natural organic matter (humic acid), could promote the adsorption of TE by 4.45-20.9%. In addition, the regeneration rate of WHCBC was able to reach up to 83.3% after five regeneration cycles by desorption stirring with 0.2 mol/L HCl (t = 360 min). The results suggest that WHCBC has a potential in application for removing TE from water.

Hydrothermal and pyrolytic conversion of sunflower seed husk into novel porous biochar for efficient adsorption of tetracycline

In this study, sunflower seed husk biochar prepared by ZnCl₂-activated and hydrothermal carbonization (HZSF) was studied for its effectiveness in removing tetracycline (TC) from an aqueous solution. The physical and chemical properties of materials were characterized by different methods of surface analysis. The specific surface area of HZSF is significantly enhanced over 1200 times compared with non-modified biochar (HZSF: 1578.3 m²·g^-1, SF-700: 1.3 m²·g^-1), which has an enhancement effect on the TC adsorption capacity. The HZSF showed that the Langmuir isotherm and pseudo-second-order kinetic models could properly characterize the adsorption processes. In the Langmuir isotherm model, HZSF exhibited effective adsorption performance with q_max of 673.0 mg·g^-1 at 298 K for 24 h. The possible mechanisms for the adsorption process were the monolayer, chemical adsorption, and the participation of strong intermolecular forces. In general, HZSF has the potential to be a useful adsorbent for the elimination of antibiotics from water-based solutions.

A Stable Fe-Zn Modified Sludge-Derived Biochar for Diuron Removal: Kinetics, Isotherms, Mechanism, and Practical Research

To remove typical herbicide diuron effectively, a novel sludge-derived modified biochar (SDMBC600) was prepared using sludge-derived biochar (SDBC600) as raw material and Fe-Zn as an activator and modifier in this study. The physico-chemical properties of SDMBC600 and the adsorption behavior of diuron on the SDMBC600 were studied systematically. The adsorption mechanisms as well as practical applications of SDMBC600 were also investigated and examined. The results showed that the SDMBC600 was chemically loaded with Fe-Zn and SDMBC600 had a larger specific surface area (204 m²/g) and pore volume (0.0985 cm³/g). The adsorption of diuron on SDMBC600 followed pseudo-second-order kinetics and the Langmuir isotherm model, with a maximum diuron adsorption capacity of 17.7 mg/g. The biochar could maintain a good adsorption performance (8.88-12.9 mg/g) under wide water quality conditions, in the pH of 2-10 and with the presence of humic acid and six typical metallic ions of 0-20 mg/L. The adsorption mechanisms of SDMBC600 for diuron were found to include surface complexation, π-π binding, hydrogen bonding, as well as pore filling. Additionally, the SDMBC600 was tested to be very stable with very low Fe and Zn leaching concentration ≤0.203 mg/L in the wide pH range. In addition, the SDMBC600 could maintain a high adsorption capacity (99.6%) after four times of regeneration and therefore, SDMBC600 could have a promising application for diuron removal in water treatment.

Performance and mechanism of Pb2+ and Cd2+ ions’ adsorption via modified antibiotic residue-based hydrochar

This study investigated the hydrochar-based porous carbon prepared by combining the technical route of hydrothermal carbonization (HTC) + chemical activation. The hydrochar morphology was adjusted by changing the activation reaction conditions and adding metal salts. Experiments showed that the activation of KHCO₃ significantly increased the specific surface area and pore size of the hydrochar. Besides, oxygen-rich groups on the surface of the activated hydrochar interacted with heavy metal ions to achieve efficient adsorption. The activated hydrothermal carbon adsorption capacity for Pb²⁺ and Cd²⁺ ions reached 289 and 186 mg/g, respectively. The adsorption mechanism study indicated that the adsorption of Pb²⁺ and Cd²⁺ was related to electrostatic attraction, ion exchange, and complexation reactions. The "HTC + chemical activation" technology was environmentally friendly and effectively implemented antibiotic residues. Carbon materials with high adsorption capacity can be prepared so that biomass resources can be utilized with excessive value, as a consequence presenting technical assistance for the comprehensive disposal of organic waste in the pharmaceutical industry and establishing a green and clean production system.

Hydrothermal synthesis of sewage sludge biochar for activation of persulfate for antibiotic removal: Efficiency, stability and mechanism

The use of biochar materials as catalysts to activate persulfate (PS) for the degradation of antibiotics has attracted much attention. In this study, a carbonaceous material (Cu/Zn-SBC) was prepared from sewage sludge by hydrothermal modification. The efficiency of PS activation by Cu/Zn-SBC was investigated using tetracycline (TC) as the model antibiotic. In the Cu/Zn-SBC + PS system, the TC removal rate reached 90.13% at 10 min and exceeded 99% within 4 h. This not only met the requirement of removing large amounts of pollutants in a short time but also achieved the complete removal of pollutants in the subsequent time. Additionally, the Cu/Zn-SBC + PS system was found to be dominated by radical and nonradical pathways. Cu, hydroxyl and carboxyl groups on the surface of Cu/Zn-SBC promoted the production of free radicals and non-free radicals. Under several changes in reaction conditions and water environment factors, the TC removal rate remained above 85% within 10 min. Furthermore, the removal rate of TC was still 85.79% when Cu/Zn-SBC combined with PS was reused twice and 77.14% when reused four times. This study provides an ideal solution for the treatment of sewage sludge, and offers a stable and efficient material for removing antibiotics from wastewater.

Efficient removal of tetracycline from aqueous solution by K2CO3 activated penicillin fermentation residue biochar

In this study, biochar was prepared using penicillin fermentation residue (PR) as the raw material by different methods. The adsorption behavior and adsorption mechanism of biochar on tetracycline (TC) in an aqueous environment were investigated. The results showed that K₂CO₃ as an activator could effectively make porous structures, and that biochar with mesoporous or microporous could be prepared in a controlled manner with two kinds of different activation methods, the dry mixing method and the impregnation method. The dry mixing method could create more mesopores, while the impregnation method could prepare more micropores. Microporous biochar (IKBCH) with a high specific surface area could be prepared by the impregnation method combined with HCl soaking, which has an excellent adsorption effect on tetracycline. When the concentration of tetracycline was 200 mg/L, the removal rate of 99.91% could be achieved with the dosage of microporous biochar at 1 g/L. The adsorption process was in accordance with the Langmuir model and the pseudo-second-order model, respectively. The maximum adsorption capacity of IKBCH was 268.55 mg/g (25°C). The adsorption mechanisms were pore filling, π-π interaction, electrostatic adsorption, and hydrogen bond. Its stable and wide applicability adsorption process does not cause ecological pollution in the aqueous environment, and it is a promising biochar adsorbent.

Introduction of acid mine drainage in the direct production of 5-hydroxymethylfurfural from raw biomass and expanding the use of biomass conversion residue

Direct production of 5-hydroxymethylfurfural (HMF) through biomass always needs the addition of exogenous catalysts and causes extra costs. Herein, acid mine drainage (AMD), one of the traditional wastewaters, was introduced as a natural catalyst to produce HMF directly from lignocellulosic biomass. Key factors in the biomass conversion were optimized and investigated by the response surface methodology (RSM), and the HMF yield reached 13.51 wt% under optimal conditions. The metal elements and the acidic environment in AMD activated the Fenton reaction to effectively destroy the lignocellulose structure and synergistically promote the formation of HMF. Furthermore, the biomass substrate in the biomass conversion was indirectly modified by the AMD during this process. The biomass conversion residue could be prepared by pyrolysis to obtain a functional metal-loaded carbon material with good adsorption of thiamethoxam (THX), which provides a sustainable solution for the disposal of biomass conversion residue.

Efficient Cr(VI) removal from wastewater by D-(+)-xylose based adsorbent: Key roles of three-dimensional porous structures and oxygen groups

Reducing the harm of heavy metals to the environment has been a major scientific challenge. In this study, D-(+)-xylose was used to prepare an adsorbent with rich O groups and three-dimensional porous structures for Cr(VI) adsorption. What's more, the adsorption sites of many oxygen groups in the material were combined with the three-dimensionally connected porous structures, which made the adsorption sites fully in contact with Cr(VI). At the concentration of 300 mg/L, the removal rate of Cr(VI) was 94.50%, 6.4 times that of the non-porous treatment and 9.6 times that of the non-porous and O group treatment. The adsorbent showed a high adsorption capacity (910.10 mg/g) for Cr(VI), and the adsorption model proved that the adsorbent was a multi-molecular layer adsorbent. In addition, the adsorption was controlled by chemical reaction and diffusion, which was also attributed to the three-dimensional porous structure and abundant oxygen groups of the material. XPS and FTIR indicated that four O groups participated in the adsorption reaction (-OH, C-O-C, CO, and C-O), and C-O-C and C-O were the main reaction sites. After treating wastewater from electroplating plants with X-PC, the discharged water met international and domestic discharge standards (Cr(VI) removal rate> 99.90%). This work provides a new idea for the application of sugars in the environment and the design of porous adsorbents.

Simultaneous adsorption of phosphate and tetracycline by calcium modified corn stover biochar: Performance and mechanism

It is important to solve the problems of biomass treatment and combined contaminants removal in environmental remediation. In this study, a calcium (Ca) modified biochar (CaBC800) was fabricated using corn stover (CS) as a raw material to remove phosphate and tetracycline (TC). The experimental results indicate that CaBC800 can adsorb both inorganic phosphate and organic TC. The entire adsorption process corresponds to pseudo-second-order kinetics and Langmuir adsorption isotherm. The maximum adsorption capacities of phosphate and TC were 33.944 and 33.534 mg/g, respectively. The phosphate adsorption was demonstrated to mainly depend on the chemical precipitation by Ca²⁺ and ligand exchange by hydroxyl groups from CaBC800. Meanwhile, hydrogen bonding from oxygen functional groups and π-π interactions from aromatic rings are the main adsorption mechanisms of TC. This study provides a new adsorbent to efficiently remove phosphate and TC, and the simultaneous adsorption indicates the application potential of CaBC800 in wastewater remediation.

Recovery, regeneration and sustainable management of spent adsorbents from wastewater treatment streams: A review

Adsorption is the most widely adopted, effective, and reliable treatment process for the removal of inorganic and organic contaminants from wastewater. One of the major issues with the adsorption-treatment process for the removal of contaminants from wastewater streams is the recovery and sustainable management of spent adsorbents. This review focuses on the effectiveness of emerging adsorbents and how the spent adsorbents could be recovered, regenerated, and further managed through reuse or safe disposal. The critical analysis of both conventional and emerging adsorbents on organic and inorganic contaminants in wastewater systems are evaluated. The various recovery and regeneration techniques of spent adsorbents including magnetic separation, filtration, thermal desorption and decomposition, chemical desorption, supercritical fluid desorption, advanced oxidation process and microbial assisted adsorbent regeneration are discussed in detail. The current challenges for the recovery and regeneration of adsorbents and the methodologies used for solving those problems are covered. The spent adsorbents are managed through regeneration for reuse (such as soil amendment, capacitor, catalyst/catalyst support) or safe disposal involving incineration and landfilling. Sustainable management of spent adsorbents, including processes involved in the recovery and regeneration of adsorbents for reuse, is examined in the context of resource recovery and circular economy. Finally, the review ends with the current drawbacks in the recovery and management of the spent adsorbents and the future directions for the economic and environmental feasibility of the system for industrial-scale application.

Adsorption of chlortetracycline in aquaculture wastewater by lanthanum modified multi-walled carbon nanotubes

The lanthanum modified multi-walled carbon nanotubes (La-CNTs) prepared by an impregnation method were investigated for the adsorption of chlortetracycline (CTC) in aquaculture wastewater. The adsorbents were characterized by SEM, EDS, XRD and BET. The effects of some factors including La-containing impregnant concentration, adsorbent dosage, CTC adsorbate concentration, adsorption time, pH of the adsorbate solution and additional ions on the CTC adsorption by La-CNTs were investigated in detail, and the optimal adsorption conditions were determined. The adsorption kinetics obeyed the quasi-second-order kinetic model. The adsorption isotherms obeyed the Langmuir model and the fitted maximum capacity of La-CNTs for CTC adsorption was 55.3 mg/g.

A feasible biochar derived from biogas residue and its application in the efficient adsorption of tetracycline from an aqueous solution

The recovery of carbon materials from biogas residue (BR) could efficiently promote the efficient utilization of waste and the preparation of novel materials. In this study, a green and feasible reagent of citric acid was introduced and applied in the modification of biogas residue biochar (BRC). The modified biogas residue biochar (CABRC) showed a superior adsorption ability due to its higher specific surface area (approximately 6 times that of the BRC). Additionally, the adsorption capacities of CABRC and BRC for TC were 58.25 mg/g and 20.77 mg/g, respectively, while the TC adsorption performance of CABRC was 2.8 times that of BRC. The adsorption of TC by both BRC and CABRC was primarily controlled by physical adsorption and chemical adsorption (including pore filling, hydrogen bonding, π-π DEA interaction, and electrostatic interaction). Therefore, CABRC should be considered an environmentally friendly material due to its higher adsorption performance, which could expand its application in wastewater treatment.

Efficient adsorptive removal of fluoroquinolone antibiotics from water by alkali and bimetallic salts co-hydrothermally modified sludge biochar

Fluoroquinolones are one of most commonly used antibiotics for preventing and treating bacterial infections and their unsatisfactory removal by conventional wastewater treatment technology have aroused widespread attention. A novel adsorbent of KMSBC was the first time synthesized and tested to adsorb three typical fluoroquinolone antibiotics of CIP, NOR and OFL from water. The characterization analysis showed that KMSBC possessed the superior porous structure, abundant functional groups and greater graphitic degree. Together with kinetics, isotherms, thermodynamics and critical factors (e.g., biochar dose, reaction time/temperature, fluoroquinolone antibiotics concentration, pH, co-existing ionic strength and HA concentration) analysis suggested that pore filling, π-π conjugation, H-bonding and electrostatic interaction were the key mechanisms for fluoroquinolone antibiotics adsorption by KMSBC. KMSBC exhibited the optimum adsorption performance at pH = 5 despite the adsorbates. The maximum adsorption capacity of KMSBC for CIP, NOR and OFL were 49.9, 55.7 and 47.4 mg/g at 25 °C, respectively. Also, KMSBC exhibited the good magnetic sensitivity and stability with the leaching concentrations of Fe were far below than environmental limit (GB5749-2006) at various pH (from 3 to 12), ionic strength and HA concentrations. Additionally, KMSBC performed a stable sustainable adsorption performance in recycles by NaOH regeneration. Thus, KMSBC had the potential to be a promising adsorbent for fluoroquinolone antibiotics removal with favorable adsorption capacity, environmental security and easy regeneration performance.

Facile construction of high-performance 3D Co2C-doped CoAl2O4 fiber composites for capturing and decomposing tetracycline from aqueous solution

Herein, novel 3D hollow-carved Co₂C-doped CoAl₂O₄ fiber composites (3D-CA-FC) were successfully synthesized via a simple-green pyrolysis method and exhibited remarkably outstanding elimination performance for tetracycline (TC) by adsorption and degradation. The results indicated that the TC adsorption process of the samples could be accurately described by the pseudo-second-order and Langmuir isothermal model, and the maximum TC uptake reached up to 1889.63 mg/g under neutral conditions. Meanwhile, 3D-CA-FC showed good affinity for TC and its adsorption capacity was greatly promoted due to the presence of humic acid, CO₃^2- ion and weakly alkaline environment. About complete degradation of TC could be completed within 60 min under suitable conditions. A significant improvement of catalyst rate was observed after the addition of CO₃^2- ion, because of the selective degradation of CO₃^•- to TC. BET, XPS and FT-IR analysis indicated that the mechanisms of TC uptake can be ascribed to pore-filling, H-bonds and complexation. Radical trapping experiments showed that ¹O₂ should serve as predominant contributions, and SO₄^•- and •OH also played a role in the degradation process. This study provides some inspiration for the construction of 3D-CA-FC as a novel and promising bifunctional material for the elimination of contaminants in water treatment.

Metal-rich hyperaccumulator-derived biochar as an efficient persulfate activator: Role of intrinsic metals (Fe, Mn and Zn) in regulating characteristics, performance and reaction mechanisms

Biochar has been widely used in advanced oxidation processes (AOPs) for the decomposition of organic contaminants. However, the role of intrinsic metals in hyperaccumulator biomass in the physico-chemical properties and performance of peroxodisulfate (PDS) activation by biochar is still unclear. This work employed hyperaccumulator biomass containing Fe, Mn and Zn, respectively. Result showed that as the pyrolysis temperature of the biochar increased, Fe was gradually reduced to iron oxide and Fe⁰, and Zn was reduced and volatilized; however, Mn remained in biochar in the form of MnS and CaMnO₃ with high valence states. These thermochemical behaviors of intrinsic metals also facilitated graphitized structure growth and pore development (for Zn) and persistent free radicals (PFRs) generation (for Mn and Zn) in biochar, and these processes were crucial for imidacloprid degradation in biochar/PDS systems. Moreover, Fe/Zn@PB9/PDS showed better imidacloprid degradation performance, while Mn species in Mn@PB were catalytically inert. In addition, the radical pathway depending on·SO₄^- and·OH was the dominant pathway for imidacloprid degradation in the Fe@PB9/PDS systems, while the·O₂^--mediated ¹O₂ pathway and ¹O₂-based nonradical pathway contributed more in the Zn@PB9/PDS systems. These results reveal the role of intrinsic metals in biochar-based catalysts and provide a reference for the preparation of green and efficient hyperaccumulator-derived biochar catalysts for AOPs.

Bifunctional two-dimensional copper-aluminum modified filter paper composite for efficient tetracycline removal: Synergy of adsorption and reusability by degradation

Herein, bifunctional two-dimensional copper-aluminum modified filter paper composite (2D-Cu/Al-C) was successfully prepared by simple calcination and showed ultrahigh adsorption performance and degradation potential. The adsorption removal of TC on 2D-Cu/Al-C all exceeded 92.2% under solution conditions of 10-200 mg/L TC, 100 mg/L 2D-Cu/Al-C, pH 8 and 298 K. The pseudo-second-order kinetic and Langmuir models better fitted the kinetic and isotherm data via spontaneous and exothermic process, and the maximum capacity of the 2D-Cu/Al-C was 2391.78 mg/g. Additionally, 2D-Cu/Al-C showed desired specific adsorption for TC (TC: 98.7%, norfloxacin: 5.8%, sulfamethoxazole: 2.1%, and ciprofloxacin: 1.8%) and it could effectively adsorbed TC even in the binary system (various coexisting ions or natural organic matter). After TC adsorbed on adsorbent was mineralized into CO₂ and H₂O by adding peroxydisulfate to generate high electrode potential radical in another limited systems, the 2D-Cu/Al-C still had ∼89.12% on TC removal (initial concentration of 50 mg/L) after five experimental cycles. Zeta potential, FT-IR and XPS results indicated that the multi-adsorption mechanism, including electrostatic interactions, complexation, and H-bonds, played a vital role in the fast and efficient adsorption process. Thus, the way of combining adsorption and regeneration via degradation are green, non-polluting strategy which are expected to be applied for water purification in future environmental remediation.

Combined impact of TiO2 nanoparticles and antibiotics on the activity and bacterial community of partial nitrification system

The effects of TiO2 nanoparticles (nano-TiO2) together with antibiotics leaking into wastewater treatment plants (WWTPs), especially the partial nitrification (PN) process remain unclear. To evaluate the combined impact and mechanisms of nano-TiO2 and antibiotics on PN systems, batch experiments were carried out with six bench-scale sequencing batch reactors. Nano-TiO2 at a low level had minimal effects on the PN system. In combination with tetracycline and erythromycin, the acute impact of antibiotics was enhanced. Both steps of nitrification were retarded due to the decrease of bacterial activity and abundance, while nitrite-oxidizing bacteria were more sensitive to the inhibition than ammonia-oxidizing bacteria. Proteobacteria at the phylum level and Nitrosospira at the genus level remained predominant under single and combined impacts. The flow cytometry analysis showed that nano-TiO2 enhanced the toxicity of antibiotics through increasing cell permeability. Our results can help clarify the risks of nano-TiO2 combined with antibiotics to PN systems and explaining the behavior of nanoparticles in WWTPs.

Sustainable biochar/MgFe2O4 adsorbent for levofloxacin removal: Adsorption performances and mechanisms

The limitation of low efficiency and complicated separation after adsorption make the practical application of biochar a huge challenge. Here, one pomelo peel-derived magnetic biochar composite, biochar supported MgFe₂O₄ (BMF) was fabricated and adopted for Levofloxacin (LFX) adsorption. Adsorption behaviors and mechanisms were investigated by characterization analysis, batch experiments, and data modeling. Results indicated that adsorption could be strikingly influenced by pyrolysis temperature. Adsorption kinetic was well fitted by pseudo-second-order model. Adsorption isotherm was best fitted with Freundlich model. The maximum adsorption capacity was 115 mg g^-1. Moreover, hydrophobic effect played a limited contribution according to dual-mode model analysis. LFX adsorption was spontaneous and endothermic. Adsorption mechanisms were ascribed to electrostatic interactions, H-bonding, functional groups complexation, and π-π electron donor-acceptor interactions. Besides that, BMF had the potential for repeated use. This research proposed a novel and promising method for LFX or other antibiotics adsorption removal.

Zn2+ removal from the aqueous environment using a polydopamine/hydroxyapatite/Fe3O4 magnetic composite under ultrasonic waves

In this study, an easily magnetically recoverable polydopamine (PDA)-modified hydroxyapatite (HAp)/Fe₃O₄ magnetic composite (HAp/Fe₃O₄/PDA) was suitably synthesized to exploit its adsorption capacity to remove Zn²⁺ from aqueous solution, and its structural properties were thoroughly examined using different analytical techniques. The effect of multiple parameters like pH, ultrasonic power, ultrasonic time, adsorbent dose, and initial Zn²⁺ concentration on the adsorption efficiency was assessed using RSM-CCD. According to the acquired results, by increasing the adsorbent quantity, ultrasonic power, ultrasonic time, and pH, the Zn²⁺ adsorption efficiency increased and the interaction between the variables of ultrasonic power/Zn²⁺ concentration, pH/Zn²⁺ concentration, pH/absorbent dose, and ultrasonic time/adsorbent dose has a vital role in the Zn²⁺ adsorption. The uptake process of Zn²⁺ onto PDA/HAp/Fe₃O₄ followed Freundlich and pseudo-second order kinetic models. The maximum capacity of Zn²⁺ adsorption (q _m) obtained by PDA/HAp/Fe₃O₄, HAp/Fe₃O₄, and HAp was determined as 46.37 mg g^-1, 40.07 mg g^-1, and 37.57 mg g^-1, respectively. Due to its good performance and recoverability (ten times), the HAp/Fe₃O₄/PDA magnetic composite can be proposed as a good candidate to eliminate Zn²⁺ ions from a water solution.

A series of novel carbohydrate-based carbon adsorbents were synthesized by self-propagating combustion for tetracycline removal

Herein, a series of novel adsorbents derived from glucose, maltose, and starch zinc oxide (ZnO) loaded carbohydrate-based carbon materials (Zn-Cs) were synthesized by a fast and efficient self-propagating combustion synthesis method (SCS). The experimental results show that Zn-Cs exhibits excellent adsorption performance (>375 mg/g) to tetracycline, and the pseudo-second-order model and Freundlich model can better describe the adsorption data. The adsorption capacities of Zn-Cs were over 300 mg/g throughout the wide pH range (6-9), while various coexisting ions in the concentration range of 0-10 mg/L and the presence of humic acid had nearly no impact on the adsorption of tetracycline. Moreover, the adsorption experiment of simulated hospital wastewater shows that the adsorption capacity of Zn-Cs for tetracycline exceeds 185 mg/g. The adsorption mechanism of tetracycline are H-bond, complexation, and conjugation effect. This work provides an efficient, excellent versatility and time-saving strategy for preparing high-performance carbohydrate-based carbon materials for adsorbents.

The efficient enrichment of marine peptides from the protein hydrolysate of the marine worm Urechis unicinctus by using mesoporous materials MCM-41, SBA-15 and CMK-3

Peptides found in marine life have various specific activities due to their special growth environment, and there is increasing interest in the isolation and concentration of these biofunctional compounds. In this study, the protein hydrolysate of the marine worm Urechis unicinctus was prepared by enzymolysis and enriched by using mesoporous materials of silica MCM-41 and SBA-15 and carbon CMK-3. The differences in pore structures and elemental composition of these materials lead to differences in surface area and hydrophobicity. The adsorption capacities of peptides were 459.5 mg g^-1, 431.3 mg g^-1, and 626.3 mg g^-1 for MCM-41, SBA-15 and CMK-3, respectively. Adsorption kinetics studies showed that the pseudo-second-order model fit the adsorption process better, where both external mass transfer and intraparticle diffusion affected the adsorption, while the Langmuir model better fit the adsorption of peptides on MCM-41 and SBA-15 and the Freundlich model was more suitable for CMK-3. Aqueous acetonitrile (ACN, 50/50, v/v) yielded the most extracted peptides. MALDI-TOF mass spectrometry of the extracted peptides showed that the three mesoporous materials, especially the CMK-3, gave good enrichment results. This study demonstrates the great potential of mesoporous materials in the enrichment of marine biofunctional peptides.