From source to sink: Review and prospects of microplastics in wetland ecosystems

Does invasive submerged macrophyte diversity affect dissimilatory nitrate reduction processes in sediments with varying microplastics?

Nitrogen removal is essential for restoring eutrophic lakes. Microorganisms and aquatic plants in lakes are both crucial for removing excess nitrogen. However, microplastic (MP) pollution and the invasion of exotic aquatic plants have become increasingly serious in lake ecosystems due to human activity and plant-dominant traits. This field mesocosm study explored how the diversity of invasive submerged macrophytes affects denitrification (DNF), anammox (ANA), and dissimilatory nitrate reduction to ammonium (DNRA) in lake sediments with varying MPs. Results showed that invasive macrophytes suppressed DNF rates, but DNRA and ANA were less sensitive than DNF to the diversity of invasive species. Sediment MPs increased the biomass of invasive species more than native species, but did not affect microbial processes. The effects of MPs on nitrate dissimilatory reduction were process-specific. MPs increased DNF rates and the competitive advantage of DNF over DNRA by changing the sediment environment. The decoupling of DNF and ANA was also observed, with increased DNF rates and decreased ANA rates. The study findings suggested new insights into how the invasion of exotic submerged macrophytes affects the sediment nitrogen cycle complex environments.

Biodegradable microplastics pose greater risks than conventional microplastics to soil properties, microbial community and plant growth, especially under flooded conditions

Biodegradable plastics (bio-plastics) are often viewed as viable option for mitigating plastic pollution. Nevertheless, the information regarding the potential risks of microplastics (MPs) released from bio-plastics in soil, particularly in flooded soils, is lacking. Here, our objective was to investigate the effect of polylactic acid MPs (PLA-MPs) and polyethylene MPs (PE-MPs) on soil properties, microbial community and plant growth under both non-flooded and flooded conditions. Our results demonstrated that PLA-MPs dramatically increased soil labile carbon (C) content and altered its composition and chemodiversity. The enrichment of labile C stimulated microbial N immobilization, resulting in a depletion of soil mineral nitrogen (N). This specialized environment created by PLA-MPs further filtered out specific microbial species, resulting in a low diversity and simplified microbial community. PLA-MPs caused an increase in denitrifiers (Noviherbaspirillum and Clostridium sensu stricto) and a decrease in nitrifiers (Nitrospira, MND1, and Ellin6067), potentially exacerbating the mineral N deficiency. The mineral N deficit caused by PLA-MPs inhibited wheatgrass growth. Conversely, PE-MPs had less effect on soil ecosystems, including soil properties, microbial community and wheatgrass growth. Overall, our study emphasizes that PLA-MPs cause more adverse effect on the ecosystem than PE-MPs in the short term, and that flooded conditions exacerbate and prolong these adverse effects. These results offer valuable insights for evaluating the potential threats of bio-MPs in both uplands and wetlands.

The exploitation of bio-electrochemical system and microplastics removal: Possibilities and perspectives

Microplastic (MP) pollution has caused severe concern due to its harmful effect on human beings and ecosystems. Existing MP removal methods face many obstacles, such as high cost, high energy consumption, low efficiency, release of toxic chemicals, etc. Thus, it is crucial to find appropriate and sustainable methods to replace common MP removal approaches. Bio-electrochemical system (BES) is a sustainable clean energy technology that has been successfully applied to wastewater treatment, seawater desalination, metal removal, energy production, biosensors, etc. However, research reports on BES technology to eliminate MP pollution are limited. This paper reviews the mechanism, hazards, and common treatment methods of MP removal and discusses the application of BES systems to improve MP removal efficiency and sustainability. Firstly, the characteristics and limitations of common MP removal techniques are systematically summarized. Then, the potential application of BES technology in MP removal is explored. Furthermore, the feasibility and stability of the potential BES MP removal application are critically evalauted while recommendations for further research are proposed.

Factors influencing the distribution, risk, and transport of microplastics and heavy metals for wildlife and habitats in "island" landscapes: From source to sink

Microplastics (MPs) and heavy metals (HMs) are important pollutants in terrestrial ecosystems. In particular, the "island" landscape's weak resistance makes it vulnerable to pollution. However, there is a lack of research on MPs and HMs in island landscapes. Therefore, we used Helan Mountain as the research area. Assess the concentrations, spatial distribution, ecological risks, sources, and transport of MPs and HMs in the soil and blue sheep (Pseudois nayaur) feces. Variations in geographical distribution showed a connection between human activity and pollutants. Risk assessment indicated soil and wildlife were influenced by long-term pollutant polarization and multi-element inclusion (Igeo, Class I; PHI, Class V; RI (MPs), 33 % Class II, and 17 % Class IV; HI = 452.08). Source apportionment showed that tourism and coal combustion were the primary sources of pollutants. Meanwhile, a new coupling model of PMF/Risk was applied to quantify the source contribution of various risk types indicated transportation roads and tourism sources were the main sources of ecological and health risks, respectively. Improve the traceability of pollution source risks. Furthermore, also developed a novel tracing model for pollutant transportation, revealing a unique "source-sink-source" cycle in pollutant transportation, which provides a new methodological framework for the division of pollution risk areas in nature reserves and the evaluation of spatial transport between sources and sinks. Overall, this study establishes a foundational framework for conducting comprehensive risk assessments and formulating strategies for pollution control and management.

Nitrogen supply neutralizes the nanoplastic-plant interaction in a coastal wetland

The presence of nanoplastics posed a potential threat to coastal saline-alkaline wetlands where nitrogen (N) fertilizer is being implemented as an important ecological restoration measure. Notwithstanding, the effects of N inputs on plant community in polypropylene-nanoplastics (PP-NPs) coexistence environments are largely unknown. To address this, we investigated the effects of PP-NPs addition alone or combined N supply on community aboveground biomass, morphological traits, diversity, composition, niche differentiation, interspecific interactions, and assembly. Our results showed that the PP-NPs addition alone reduced community aboveground biomass and morphological traits. However, the addition of high concentration (0.5%) PP-NPs alone favored community α-diversity and reduced community stability, which could be weakened through combined N supply. Overall, the effect of PP-NPs addition alone on plant community composition was greater than that of combined N supply. We also demonstrated PP-NPs addition alone and combined N supply reduced the niche breadth of the plant community and affected the niche overlap of dominant species. In the assembly of plant communities, stochastic processes played a dominant role. We conclude that N fertilization can amend the terrestrial nanoplastics pollution, thus mitigating the effects of PP-NPs on the plant community.

Non-negligible impact of microplastics on wetland ecosystems

There has been much concern about microplastic (MP) pollution in marine and soil environments, but attention is gradually shifting towards wetland ecosystems, which are a transitional zone between aquatic and terrestrial ecosystems. This paper comprehensively reviews the sources of MPs in wetland ecosystems, as well as their occurrence characteristics, factors influencing their migration, and their effects on animals, plants, microorganisms, and greenhouse gas (GHG) emissions. It was found that MPs in wetland ecosystems originate mainly from anthropogenic sources (sewage discharge, and agricultural and industrial production) and natural sources (rainfall-runoff, atmospheric deposition, and tidal effects). The most common types and forms of MPs identified in the literature were polyethylene and polypropylene, fibers, and fragments. The migration of MPs in wetlands is influenced by both non-biological factors (the physicochemical properties of MPs, sediment characteristics, and hydrodynamic conditions) and biological factors (the adsorption and growth interception by plant roots, ingestion, and animal excretion). Furthermore, once MPs enter wetland ecosystems, they can impact the resident microorganisms, animals, and plants. They also have a role in global warming because MPs act as unique exogenous carbon sources, and can also influence GHG emissions in wetland ecosystems by affecting the microbial community structure in wetland sediments and abundance of genes associated with GHG emissions. However, further investigation is needed into the influence of MP type, size, and concentration on the GHG emissions in wetlands and the underlying mechanisms. Overall, the accumulation of MPs in wetland ecosystems can have far-reaching consequences for the local ecosystem, human health, and global climate regulation. Understanding the effects of MPs on wetland ecosystems is essential for developing effective management and mitigation strategies to safeguard these valuable and vulnerable environments.

Microplastics removal mechanisms in constructed wetlands and their impacts on nutrient (nitrogen, phosphorus and carbon) removal: A critical review

Microplastics (MPs) are now prevalent in aquatic ecosystems, prompting the use of constructed wetlands (CWs) for remediation. However, the interaction between MPs and CWs, including removal efficiency, mechanisms, and impacts, remains a subject requiring significant investigation. This review investigates the removal of MPs in CWs and assesses their impact on the removal of carbon, nitrogen, and phosphorus. The analysis identifies crucial factors influencing the removal of MPs, with substrate particle size and CWs structure playing key roles. The review highlights substrate retention as the primary mechanism for MP removal. MPs hinder plant nitrogen uptake, microbial growth, community composition, and nitrogen-related enzymes, reducing nitrogen removal in CWs. For phosphorus and carbon removal, adverse effects of MPs on phosphorus elimination are observed, while their impact on carbon removal is minimal. Further research is needed to understand their influence fully. In summary, CWs are a promising option for treating MPs-contaminated wastewater, but the intricate relationship between MPs and CWs necessitates ongoing research to comprehend their dynamics and potential consequences.

Systematic CFD-based evaluation of physical factors influencing the spatiotemporal distribution patterns of microplastic particles in lakes

Spatiotemporal distribution patterns of microplastic (MP) particles in lakes hinge on both the physical conditions in the lake and particle properties. Using numerical simulations, we systematically investigated the influence of lake depth and bathymetry, wind and temperature conditions, MP particle release location and timing, as well as particle diameter (10, 20, and 50 μm). Our results indicate that maximum lake depth had the greatest effect on the residence time in the water column, as it determines the settling timescale and occurrence of hydrodynamic complexity such as density-driven flows in the lake. Increasing particle size from 10 to 20 and 50 μm also significantly reduced the residence time making particle size the factor with the second strongest effect on the residence time and, in turn, on the availability of MP particles for uptake by organisms. Changing bathymetry from a uniform to a non-uniform had a less pronounced effect on particle residence time compared to maximum depth and particle size. Release location, wind conditions, and release time had comparably little effect on particle behavior but became more important as MP particle size decreased. The release of the 10 μm MP particles in the deeper lakes with uniform bathymetry during summer with stable thermal stratification, resulted in a nearly month-long turnover phase in the fall in which both settling and rising of particles occurred simultaneously. This was caused by convective heat and water transport during this period. In these scenarios about 2.6 to 5.4 % of the released MP particles were held in or returned to the water layers near the lake surface. While acknowledging the dominant role of lake depth and MP particle size on the particle residence time, this study further emphasizes that it is ultimately a particular combination of different factors and their interactions that shape MP distribution patterns in lakes.

Potential synergy of microplastics and nitrogen enrichment on plant holobionts in wetland ecosystems

Wetland ecosystems are global hotspots for environmental contaminants, including microplastics (MPs) and nutrients such as nitrogen (N) and phosphorus (P). While MP and nutrient effects on host plants and their associated microbial communities at the individual level have been studied, their synergistic effects on a plant holobiont (i.e., a plant host plus its microbiota, such as bacteria and fungi) in wetland ecosystems are nearly unknown. As an ecological entity, plant holobionts play pivotal roles in biological nitrogen fixation, promote plant resilience and defense chemistry against pathogens, and enhance biogeochemical processes. We summarize evidence based on recent literature to elaborate on the potential synergy of MPs and nutrient enrichment on plant holobionts in wetland ecosystems. We provide a conceptual framework to explain the interplay of MPs, nutrients, and plant holobionts and discuss major pathways of MPs and nutrients into the wetland milieu. Moreover, we highlight the ecological consequences of loss of plant holobionts in wetland ecosystems and conclude with recommendations for pending questions that warrant urgent research. We found that nutrient enrichment promotes the recruitment of MPs-degraded microorganisms and accelerates microbially mediated degradation of MPs, modifying their distribution and toxicity impacts on plant holobionts in wetland ecosystems. Moreover, a loss of wetland plant holobionts via long-term MP-nutrient interactions may likely exacerbate the disruption of wetland ecosystems' capacity to offer nature-based solutions for climate change mitigation through soil organic C sequestration. In conclusion, MP and nutrient enrichment interactions represent a severe ecological risk that can disorganize plant holobionts and their taxonomic roles, leading to dysbiosis (i.e., the disintegration of a stable plant microbiome) and diminishing wetland ecosystems' integrity and multifunctionality.

The critical role of microplastics in the fate and transformation of sulfamethoxazole and antibiotic resistance genes within vertical subsurface-flow constructed wetlands

Constructed wetlands (CWs) are reservoirs of microplastics (MPs) in the environment. However, knowledge about the impact of MPs on antibiotic removal and the fate of antibiotic resistance genes (ARGs) is limited. We focused on sulfamethoxazole (SMX) as a representative compound to examine the effects of MPs on SMX removal and the proliferation and dissemination of two SMX-related ARGs (sul1 and sul2) in vertical subsurface-flow CW (VFCW) microcosm. The presence of MPs in the substrate was found to enhance the proliferation of microorganisms owing to the large specific surface area of the MPs and the release of dissolved organic carbon (DOC) on MP surfaces, which resulted in a high SMX removal ranging from 97.80 % to 99.80 %. However, the presence of MPs promoted microbial interactions and the horizontal gene transfer (HGT) of ARGs, which led to a significant increase in the abundances of sul1 and sul2 of 68.47 % and 17.20 %, respectively. It is thus imperative to implement rigorous monitoring strategies for MPs to mitigate their potential ecological hazards.

Prioritising plastic pollution research in blue carbon ecosystems: A scientometric overview

The Blue Carbon Ecosystems (BCEs), comprising mangroves, saltmarshes, and seagrasses, located at the land-ocean interface provide crucial ecosystem services. These ecosystems serve as a natural barrier against the transportation of plastic waste from land to the ocean, effectively intercepting and mitigating plastic pollution in the ocean. To gain insights into the current state of research, and uncover key research gaps related to plastic pollution in BCEs, this study conveyed a comprehensive overview using bibliometric, altmetric, and literature synthesis approaches. The bibliometric analysis revealed a significant increase in publications addressing plastic pollution in BCEs, particularly since 2018. Geographically, Chinese institutions have made substantial contributions to this research field compared to countries and regions with extensive BCEs and established blue carbon science programs. Furthermore, many studies have focused on mangrove ecosystems, while limited attention was given to exploring plastic pollution in saltmarsh, seagrass, and multiple ecosystems simultaneously. Through a systematic analysis, this study identified four major research themes in BCE-plastics research: a) plastic trapping by vegetated coastal ecosystems, b) microbial plastic degradation, c) ingestion of plastic by benthic organisms, and d) effects of plastic on blue carbon biogeochemistry. Upon synthesising the current knowledge in each theme, we employed a perspective lens to outline future research frameworks, specifically emphasising habitat characteristics and blue carbon biogeochemistry. Emphasising the importance of synergistic research between plastic pollution and blue carbon science, we underscore the opportunities to progress our understanding of plastic reservoirs across BCEs and their subsequent effects on blue carbon sequestration and mineralisation. Together, the outcomes of this review have overarching implications for managing plastic pollution and optimising climate mitigation outcomes through the blue carbon strategies.

Spatial distribution and characteristics of plastic pollution in the salt marshes of Bahía Blanca Estuary, Argentina

This study delves into the magnitude and attributes of plastic pollution in the salt marshes of the Bahía Blanca Estuary, Argentina, with a specific focus on its spatial distribution. The investigation included the evaluation of microplastics (1-5 mm), mesoplastics (5-25 mm) and macroplastics (25-100 mm), discovering elevated levels along the high salt marsh strandline compared to low salt marsh and mudflat areas. Notably, the abundance of plastic reached staggering levels, reaching up to 20,060 items/m2 in the vicinity of an illegal dumpsite. Microplastics, particularly in the 2-4 mm range, were dominant, and the main plastic components were high-density polyethylene (HDPE), low-density polyethylene (LDPE), polypropylene (PP), and polystyrene (PS). Plastic films emerged as the predominant plastic type, while the presence of pellets hinted at potential sources such as illegal dumping and port-related activities. This contamination could be largely attributed to inappropriate waste management practices and urban runoff, which pose a substantial ecological threat to these ecosystems. Urgent remedial action is essential to protect these marshes, underscoring the critical need for comprehensive wetland management and educational initiatives to ensure their long-term sustainability.

Psychrobacter species enrichment as potential microplastic degrader and the putative biodegradation mechanism in Shenzhen Bay sediment, China

Microplastic (MP) pollution has emerged as a pressing environmental concern due to its ubiquity and longevity. Biodegradation of MPs has garnered significant attention in combatting global MP contamination. This study focused on MPs within sediments near the sewage outlet of Shenzhen Bay. The objective was to elucidate the microbial communities in sediments with varying MPs, particularly those with high MP loads, and to identify microorganisms associated with MP degradation. The results revealed varying MP abundance, ranging from 211 to 4140 items kg-1 dry weight (d. w.), with the highest concentration observed near the outfall. Metagenomic analysis confirmed the enrichment of Psychrobacter species in sediments with high MP content. Psychrobacter accounted for ∼16.71% of the total bacterial community and 41.71% of hydrocarbon degrading bacteria at the S3 site, exhibiting a higher abundance than at other sampling sites. Psychrobacter contributed significantly to bacterial function at S3, as evidenced by the Kyoto Encyclopedia of Genes and Genomes pathway and enzyme analysis. Notably, 28 enzymes involved in MP biodegradation were identified, predominantly comprising oxidoreductases, hydrolases, transferases, ligases, lyases, and isomerases. We propose a putative mechanism for MP biodegradation, involving the breakdown of long-chain plastic polymers and subsequent oxidation of short-chain oligomers, ultimately leading to thorough mineralization.

Interactions between microplastics and Culex sp. larvae in wastewater

Microplastics (MPs) are a growing issue because they endanger both aquatic organisms and humans. Studies have indicated that wastewater treatment plants (WWTPs) are one of the major contributors to MPs in the environment. However, studies on the abundance of MP contamination in WWTPs and its transmission into aquatic organisms are still scarce, especially in Egypt. The goal of this study was to examine the temporal fluctuations in the distribution of MPs in surface water and the dominant macroinvertebrate fauna (Culex sp. larvae) in a fixed wastewater basin in Sohag Governorate, Egypt. The average of MPs in the surface water was 3.01 ± 0.9 particles/L. The results indicated to seasonal variation of MP abundance in the wastewater basin that was significantly higher in winter than in the other seasons. The risk index for polymers (H), pollution load index (PLI), and potential ecological risk index (RI) were used to assess the degree of MP contamination. The basin has moderate H values (<1000) because of the presence of polymers with moderate hazard scores such as polyester (PES), polyethylene (PE), and polypropylene (PP). According to the PLI values, surface water is extremely contaminated with MPs (PLI: 88 to 120). The RI values of surface water showed higher ecological risk (level V). MPs in Culex sp. larvae were seasonally changed with an 85% detection rate, and an abundance average of 0.24 ± 0.65 particles/ind, MP concentration in Culex sp. larvae was influenced by the MP characters (shape, color, and polymer). The larvae of Culex sp. showed a greater preference for black and red fibrous polyester (PES) with sizes (<1000 μm) of MPs. These findings suggest that Culex sp. larvae prefer ingesting MPs that resemble their food. It is possible to overestimate Culex sp.'s preference for lower sizes because of their catabolism of MPs. To better understand the preferences of Culex sp. larvae for MPs, further controlled trials should be conducted. PRACTITIONER POINTS: Wastewater is highly contaminated with microplastics (MPs) in the different seasons. First report of detection of the seasonal abundance of MP in Culex sp. larvae. Culex sp. larvae showed a stronger feeding preference for MPs with specific characteristics. Smaller size and blue polyester fibers were the dominant characteristics of MPs in wastewater.

Reversing the damage: ecological restoration of polluted water bodies affected by pollutants due to anthropogenic activities

Aquatic ecosystems provide a large number of cultural, regulating, and supporting services to humans and play a pivotal role in sustaining freshwater-dependent ecosystems. However, an increase in human population coupled with economic growth in the last few decades has severely affected their functioning and ecological health. This has led to an increase in concentrations of pollutants originating from anthropogenic activities such as heavy metals, plastics, semi-volatile organic compounds, and endocrine disruptors. These pollutants provoke deleterious impacts on aquatic biodiversity and affect the water quality and functioning. In this paper, we discuss the sources and impacts of such pollutants as well as restoration techniques for reducing their impact on aquatic ecosystems. Several physical and chemical ecological restoration techniques, such as dredging, sediment capping, water diversion, adsorption, aeration, and flushing, can be employed to improve the water quality of water bodies. Additionally, biological techniques such as phytoremediation, phycoremediation, the use of biomembranes, and the construction of ecological floating beds can be employed to increase the population of aquatic organisms and improve the overall ecological health of aquatic ecosystems. Restoration techniques can effectively reduce the concentrations of suspended solids and dissolved phosphorus and increase the levels of dissolved oxygen. The restoration techniques for improving the ecological health of water bodies should not be limited to simply improving the water quality but should also focus on improving the biological processes and ecosystem functioning since it is essential to mitigate the adverse effects of pollutants and restore the vital ecosystem services provided by water bodies for future generations.

Urban tropical freshwater ponds as microplastics hotspots-insight on abundance and characteristics using an improved sampling technique

This study elucidates the distribution and characteristics of microplastics (MPs) in 20 tropical freshwater ponds, located in the urban settlement of Raipur city in state of Chhattisgarh, India. The ponds were divided into 4 groups based on the habitat types to understand the influence of land use patterns and human activity on the distribution of MPs. Here, we provide an improved sampling technique that is economical, traditional, indigenous, independent of vessels or structures, and replicable for smaller waterbodies. The efficiency of the proposed method is closer to the traditional boat-based net sampling technique. MPs are ubiquitous in surface water samples of all 20 ponds. The average abundance of MPs was 2.52 ± 1.28 particles/L for bucket samples and 2.93 ± 1.34 particles/L for net samples. Among extracted MPs, fragments, films, and foams were dominant. MPs within size class 1 mm to 500 μm were prevailing for both bucket samples and tube-net samples. Color-wise, white/transparent and black MPs were abundant in both types of samples while the majority of MPs were polyethylene and polystyrene. The tube-net sampling method is economical and replicable and provides comparable results. This can help study MPs distribution in smaller inland waterbodies where boats and structures are not readily available to conduct net sampling. We provide the first insight into the distribution of MPs in urban ponds, and the results can be used to determine the ubiquity of MPs in urban ponds located in different regions of the subcontinent.

Seawater Accelerated the Aging of Polystyrene and Enhanced Its Toxic Effects on Caenorhabditis elegans

Microplastics (MPs) are emerging pollutants and pose a significant threat to marine ecosystems. Although previous studies have documented the mechanisms and toxic effects of aging MPs in various environments, the impact of the marine environment on MPs remains unclear. In the present study, the aging process of polystyrene (PS) in seawater was simulated and the changes in its physicochemical properties were investigated. Our results showed that the surface of the PS eroded in the seawater, which was accompanied by the release of aged MPs with a smaller size. In situ optical photothermal infrared microspectroscopy revealed that the mechanism of PS aging was related to the opening of the carbonyl group and breaking of the bond between carbon and benzene removal. To verify the toxic effects of aged PS, Caenorhabditis elegans was exposed to PS. Aged PS resulted in a greater reduction in locomotion, vitality, and reproduction than virgin PS. Mechanistically, aged PS led to oxidative stress, high glutathione s-transferase activity, and high total glutathione in worms. Together, our findings provided novel information regarding the accelerated aging of PS in seawater and the increased toxicity of aged PS, which could improve our understanding of MPs' ecotoxicity in the marine environment.

Distinct microplastics abundance variation in root-associated sediments revealed the underestimation of mangrove microplastics pollution

Mangrove sediment is acknowledged as the critical sink of microplastics (MPs). However, the potential effect of mangrove root systems on the MPs migration in sediment remains largely unknown. Here, our study characterized the spatial distribution of MPs trapped in root hair, rhizosphere, and non-rhizosphere zones, and analyzed their correlations with physicochemical properties of sediments. The significantly increased MPs abundances toward root systems shed light on the distinct effect on the migration of MPs exerted by mangrove root systems. Partial least squares path modeling (PLS-PM) analysis revealed that pore water content and pH influenced the abundances of different MP characteristics (shape, color, size, and type) and further promoted the accumulation of MPs toward the root systems. In different mangrove areas from landward to seaward, other sediment properties (median grain size, clay content, and salinity) also controlled MP distribution. Additionally, smaller-sized MPs (<1000 μm) were more easily transported to the root systems. Our study emphasizes the importance of considering root systems effect when investigating the mechanisms of MPs distribution and migration in mangrove sediments.

Effects of plastic contamination on carbon fluxes in a subtropical coastal wetland of East China

Coastal wetlands are recognized as carbon sinks that play an important role in mitigating global climate change because of the strong carbon uptake by vegetation and high carbon sequestration in the soil. Over the last few decades, plastic waste pollution in coastal zones has become increasingly serious owing to high-intensity anthropogenic activities. However, the influence of plastic waste (including foam waste) accumulation in coastal wetlands on carbon flux remains unclear. In the Yangtze Estuary, we investigated the variabilities of vegetation growth, carbon dioxide (CO2) and methane (CH4) fluxes, and soil properties in a clean Phragmites australis marsh and mudflat and a plastic-polluted marsh during summer and autumn. The clean marsh showed a strong CO2 uptake capacity (a carbon sink), and the clean mudflat showed a weak CO2 sink during the measurement period. However, polluted marshes are a significant source of CO2 emissions. Regardless of the season, the gross primary production and vegetation biomass of the polluted marshes were on average 9.5 and 1.1 times lower than those in the clean marshes, respectively. Ecosystem respiration and CH4 emissions in polluted marshes were significantly higher than those in clean marshes and mudflats. Generally, the soil bulk density and salinity in polluted marshes were lower, whereas the median particle size was higher at the polluted sites than at the clean sites. Increased soil porosity and decreased salinity may favor CO2 and CH4 emissions through gas diffusion pathways and microbiological behavior. Moreover, the concentrations of heavy metals in the soil of plastic-polluted marshes were 1.24-1.49 times higher than those in the clean marshes, which probably limited vegetation growth and CO2 uptake. Our study highlights the adverse effects of plastic pollution on the carbon sink functions of coastal ecosystems, which should receive global attention in coastal environmental management.

Long-term aged fibrous polypropylene microplastics promotes nitrous oxide, carbon dioxide, and methane emissions from a coastal wetland soil

Microplastics (MPs) has been suggested that it can greatly affect soil greenhouse gases (GHGs) emissions via altering soil physical, chemical, and biological properties. However, the difference in GHGs emissions, especially for those from coastal wetland soils, between varied aged MPs was rarely explored and the underlying mechanisms of GHGs emissions affected by the aged MPs were poorly understood. Therefore, the implications of fibrous polypropylene MPs (FPP-MPs) exposure on N2O, CO2, and CH4 emissions were examined by a 60-day soil incubation experiment. Compared with the control, the additions of un-aged FPP-MPs with both two rates (0.2 and 2 %) and aged FPP-MPs with a low rate (0.2 %) showed an insignificant effect on N2O emission, while the aged FPP-MPs added with a high rate (2 %) resulted in a remarkably increase in N2O emission, especially for those of the 30-day-aged FPP-MPs. A significant increase in CO2 emission was only observed in the 30-day-aged FPP-MPs treatments, compared with the control, and a higher addition rate produced a higher increase of CO2 emission. Regarding CH4 emission, it was significantly increased by adding aged FPP-MPs, and a longer aging period or/and a higher addition rate generated a higher degree of promotion of CH4 emission. However, compared with the CO2 emission, the quantity of CH4 emission was extremely low. These increased GHGs emissions can be ascribed to the improvements in soil physical structure and other chemical properties (e.g., pH and contents of soil organic matter and dissolved organic carbon) and enhancements in the abundances of denitrification- and carbon mineralization-related microorganisms. Overall, our results highlight the risk of elevated GHGs emissions from the soil polluted with 30-day-aged FPP-MPs, which should not be ignored as long-term aged FPP-MPs continue to increase in coastal wetland soils.

Challenges of Raman spectra to estimate carbonyl index of microplastics: A case study with environmental samples from sea surface

This study investigates the feasibility of using the carbonyl index (CI) derived from Raman spectra as an indicator of plastic degradation and its relationship with the CI calculated from Fourier transform infrared (FTIR) spectra, using microplastic samples of polyethylene (PE) from surface seawater. Multiple methods were used to calculate the CI values of FTIR spectra, while proposed methods were used to calculate the corresponding CI values of Raman spectra. Some significant relations between FTIR CI and Raman CI were observed. However, small R2 values suggest weak functional relationships, which can be attributed to the low signal-to-noise ratio (SNR) of Raman spectra. These results highlight the challenges of establishing a functional relationship between FTIR CI and Raman CI, including challenges such as the uniformity of Raman spectra, determining optimal Raman measurement parameters, selecting appropriate peaks for Raman CI calculation, deciding on spectral processing methods, and addressing the interdependence of these issues.

Tire wear particles in different water environments: occurrence, behavior, and biological effects-a review and perspectives

As an important source of microplastics, the water ecological risk of tire wear particles (TWPs) has attracted widespread attention worldwide. However, the occurrence and behavior of TWPs and their biological effects in water environments have not been clearly analyzed. For example, most contemporary studies have focused on the evaluation of the aquatic toxicity of TWPs leachate, and little attention has been paid to the behavior process and potential risks of its surface properties in water environments. In addition, most studies rely on preparing TWPs under laboratory conditions or purchasing commercial TWPs for studying their water environmental behavior or exposure. These obviously cannot meet the requirements of accurate assessment of water ecological risks of TWPs. As thus, in addition to describing the occurrence, distribution, and (aging) transformation of TWPs in different water environments, we further tried to explain the potential water environment behavior process and multiple pathways leading to potential adverse impacts of TWPs on aquatic organisms from the perspectives of particle self-toxicity and release toxicity, as well as synergistic effects of TWPs and other substances are also discussed. The existing data, such as studies on the self-characteristics of TWPs, environmental factors, and subjects, are insufficient to comprehensively evaluate the recent changes in essential water ecosystem services and multifunctions caused by TWPs, implying that the impact of TWPs on water environmental health needs to be further evaluated, and the corresponding countermeasures should be recommended. In this context, the current review provides an outlook on future research on TWPs in aquatic environments.

Recent advances towards micro(nano)plastics research in wetland ecosystems: A systematic review on sources, removal, and ecological impacts

In recent years, microplastics/nanoplastics (MPs/NPs) have received substantial attention worldwide owing to their wide applications, persistence, and potential risks. Wetland systems are considered to be an important "sink" for MPs/NPs, which can have potential ecological and environmental effects on the ecosystem. This paper provides a comprehensive and systematic review of the sources and characteristics of MPs/NPs in wetland ecosystems, together with a detailed analysis of MP/NP removal and associated mechanisms in wetland systems. In addition, the eco-toxicological effects of MPs/NPs in wetland ecosystems, including plant, animal, and microbial responses, were reviewed with a focus on changes in the microbial community relevant to pollutant removal. The effects of MPs/NPs exposure on conventional pollutant removal by wetland systems and their greenhouse gas emissions are also discussed. Finally, current knowledge gaps and future recommendations are presented, including the ecological impact of exposure to various MPs/NPs on wetland ecosystems and the ecological risks of MPs/NPs associated with the migration of different contaminants and antibiotic resistance genes. This work will facilitate a better understanding of the sources, characteristics, and environmental and ecological impacts of MPs/NPs in wetland ecosystems, and provide a new perspective to promote development in this field.

Effects of waves, burial depth and material density on microplastic retention in coastal sediments

Coastal sediments, recognized as a major sink for microplastics (MPs), are subject to frequent physical disturbances, such as wave disturbance and associated sediment dynamics. Yet it remains poorly understood how wave disturbance regulates MPs accumulation in such a dynamic environment. Here, we examined the effects of waves and their interactions with material density and burial depth on the retention of MPs in coastal sediments, through manipulative experiments in a mangrove habitat along the coast of South China. The results clearly revealed that stronger waves removed more buried MPs from the sediments. Moreover, storms can have disproportional effects on MPs retention by inducing large waves and strong sediment erosion. We also demonstrated that MPs retention generally increased linearly with growing material density and non-linearly with raised burial depth in the sediment. Overall, our findings highlight the importance of both external and internal factors in shaping MPs retention in coastal ecosystems like mangroves, which is essential to assess and predict MPs accumulation patterns as well as its impacts on ecosystem functioning of such blue carbon habitats.

Role of mangrove forest in interception of microplastics (MPs): Challenges, progress, and prospects

Mangroves receive microplastics (MPs) from terrestrial, marine and atmospheric sources, acting as a huge filter for environmental MPs between land and sea. Due to the high primary production and complex hydrodynamic conditions in mangroves, MPs are extensively intercepted in various ways while flowing through mangroves, leading to a long-standing but fiercely increasing MPs accumulation. However, current researches mainly focused on the occurrence, source and fate of MPs pollution in mangroves, ignoring the role of mangrove forests in the interception of MPs. Our study firstly demonstrates that mangrove ecosystems have significantly greater MPs interception capacity than their surrounding environments. Then, the current status of studies related to the interception of MPs in mangrove ecosystems is comprehensively reviewed, with the main focus on the interception process and mechanisms. At last, the most pressing shortcomings of current research are highlighted regarding the intercepted flux, interception mechanisms, retention time and ecological risks of MPs in mangrove ecosystems and the relevant future perspectives are provided. This review is expected to emphasize the critical role of mangrove forests in the interception of MPs and provide the foundational knowledge for evaluating the MPs interception effect of mangrove forests globally.

Distribution characteristics of microplastics in storm-drain inlet sediments affected by the types of urban functional areas, economic and demographic conditions in southern Beijing

A storm-drain inlet is an important link in the transport of microplastic pollutants in urban rainwater runoff. In three functional districts (agricultural, commercial, and residential) from Beijing South 2nd Ring Road to South 6th Ring Road, microplastics in storm-drain inlet sediments were analyzed for abundance and characteristics. The abundance of microplastics in the collected samples ranged from 1121 ± 247 items kg^-1 to 7393 ± 491 items kg^-1. Among the sample areas, the commercial area had the greatest abundance (11094 items kg^-1), while the agricultural area had the lowest (833 items kg^-1). The microplastics in the samples were mainly fragments, accounting for 50.4%. Microplastics of less than 1 mm accounted for 74.8%. The color of microplastics was diverse, with colored MPs accounting for 26% and transparent ones for 47.8%. Most of the polymers detected were PET, PS, and PP, which are the most commonly used polymers. Overall, the results provide baseline data on microplastic pollution and its associated risks, in addition to guidelines for controlling runoff pollution.

Microbial engineering strategies for synthetic microplastics clean up: A review on recent approaches

Microplastics are the small fragments of the plastic molecules which find their applications in various routine products such as beauty products. Later, it was realized that it has several toxic effects on marine and terrestrial organisms. This review is an approach in understanding the microplastics, their origin, dispersal in the aquatic system, their biodegradation and factors affecting biodegradation. In addition, the paper discusses the major engineering approaches applied in microbial biotechnology. Specifically, it reviews microbial genetic engineering, such as PET-ase engineering, MHET-ase engineering, and immobilization approaches. Moreover, the major challenges associated with the plastic removal are presented by evaluating the recent reports available.

Tradeoffs and synergies in wetland multifunctionality: A scaling issue

Wetland area in agricultural landscapes has been heavily reduced to gain land for crop production, but in recent years there is increased societal recognition of the negative consequences from wetland loss on nutrient retention, biodiversity and a range of other benefits to humans. The current trend is therefore to re-establish wetlands, often with an aim to achieve the simultaneous delivery of multiple ecosystem services, i.e., multifunctionality. Here we review the literature on key objectives used to motivate wetland re-establishment in temperate agricultural landscapes (provision of flow regulation, nutrient retention, climate mitigation, biodiversity conservation and cultural ecosystem services), and their relationships to environmental properties, in order to identify potential for tradeoffs and synergies concerning the development of multifunctional wetlands. Through this process, we find that there is a need for a change in scale from a focus on single wetlands to wetlandscapes (multiple neighboring wetlands including their catchments and surrounding landscape features) if multiple societal and environmental goals are to be achieved. Finally, we discuss the key factors to be considered when planning for re-establishment of wetlands that can support achievement of a wide range of objectives at the landscape scale.

Mechanisms influencing the impact of microplastics on freshwater benthic invertebrates: Uptake dynamics and adverse effects on Chironomus riparius

Chironomids inhabit freshwater benthic ecosystems which are prone to microplastic contamination. This work aimed at understanding the factors and mechanisms influencing microplastic uptake and related adverse effects on Chironomus riparius, by exploring an extensive project database, conducting a literature review, and performing an agent-based model to explore trends in data. Results reveal that high concentrations of small microplastics fill the gut of fourth instar C. riparius (99.7 %). Ingested microplastics had an average size of 38-61 μm, presenting slower elimination rates than undigested organic or mineral particles. Ingestion rates of microplastics depend mainly on encounter rates, and therefore on available concentrations, until reaching a plateau corresponding to the maximum gut volume. Short-term toxicity of microplastics seems to result from damage to gut epithelium, with inflammatory reactions, production of reactive oxygen species, and a negative energy balance exacerbated by the lack of food (organic matter). Long-term toxicity is characterized by a reduction in larval body length and increase in mean time to emergence, seemly from increased energy costs rather than a decrease in nutrient absorption. Wild chironomids already present microplastics in their guts and environmental concentrations in hotspots may already exceed no effect concentrations. Therefore, environmental exposure to microplastics may induce adverse effects to wild C. riparius in freshwater benthic ecosystems, which could compromise their ecologic role as deposit-feeders (e.g., reducing their nutrient cycling ability) and key-stone species in aquatic food webs.

The spatial distribution of microplastics in topsoils of an urban environment - Coimbra city case-study

Due to their seemingly ubiquitous nature and links to environmental and human health problems, microplastics are quickly becoming a major concern worldwide. Artificial environments, such as those found in urban environments, represent some of the main sources of microplastic. However, very few studies have focused on the occurrence of microplastics in urban soils. The aim of the current research was to evaluate the microplastic contamination in urban soils from artificial and natural land uses throughout Coimbra city, Portugal. Sixty-seven spaces and ten land use areas were evaluated. The artificial land use areas were dumps, landfills, parking lots, industries and construction areas, and the natural land use areas were forests, urban parks, moors (wetlands), pastures and urban agricultural areas. Microplastic extraction was done by density separation. Quantification and size measurements of microplastics was carried out using a microscope. Polymer types were identified by μ-FTIR for 25% of the samples. The microplastic content ranged from 5 × 10³ to 571 × 10³ particles·kg^-1, with a mean of 106 × 10³ particle·kg^-1. The green park was the land use with the highest concentration of microplastics (158 × 10³ particle·kg^-1) and the forest was the one with the lowest concentration (55 × 10³ particle·kg^-1). The landfill (150 × 10³ particle·kg^-1), industry (127 × 10³ particle·kg^-1) and dump (126 × 10³ particle·kg^-1) were the artificial spaces with the highest levels of microplastics. The main polymers detected were polypropylene and polyethylene, followed by polyvinyl chloride and rubber, and the main sizes measured between 50 and 250 μm. Our results indicate that natural spaces can contain higher amounts of microplastics as compared to artificial spaces in the urban environment. This suggests that microplastics are easily transported through the urban landscape and that urban green spaces can retain microplastics in their soils. Land use planning may present an opportunity to better control the levels of microplastics in urban environments.

Microplastic dynamics in a free water surface constructed wetland

This study investigates microplastic (MPs) dynamics of a recently established surface flow 2100 population equivalent polishing constructed wetland (CW) receiving 1.4 ML per day of secondary treated wastewater. MPs type, size ranges and concentrations were measured along the CW at a 2-months sampling campaign. The CW received an average of 5·10⁶ MPs per day (6 MPs per liter), mostly 100-1000 μm-sized synthetic fibers followed by fragments in the same size range. 95 % of MPs were retained, resulting in 0.30 ± 0.09 MPs per liter in CW effluent. Most MPs (97 %) were trapped within the first 20 % of the CW which consisted of a settling pond and shallow vegetated treatment cells and provided an areal removal rate > 4000 MP m^-2 d^-1. Data and microscopic analysis indicate MPs erosion and fragmentation in the CW. Turbidity and suspended solids were no indicator for MP removal due to water fowl activity, algal growth, and preferential flow conditions. This is the first study on MP dynamics in an independently operating full scale free water surface CW incorporated into a municipal wastewater treatment scheme. Surface flow CWs can retain MPs effectively but accumulation in CW sediments and substrate needs to be considered when further utilized or recycled.

A systematic review on microplastic pollution in water, sediments, and organisms from 50 coastal lagoons across the globe

Coastal lagoons are transitional environments between continental and marine aquatic systems. Globally, coastal lagoons are of great ecological and socioeconomic importance as providers of valuable ecosystem services. However, these fragile environments are subject to several human pressures, including pollution by microplastics (MPs). The aim of this review was to identify and summarize advances in MP pollution research in coastal lagoons across the world. We consider peer-reviewed publications on this topic published in English and Spanish between 2000 and April 21, 2022, available in Scopus and Google Scholar. We found 57 publications with data on MP abundances and their characteristics in 50 coastal lagoons from around the world, 58% of which have some environmental protection status. The number of publications on this type of pollution in lagoons has increased significantly since 2019. Methodological differences amongst studies of MPs in coastal lagoons were nevertheless a limiting factor for wide-ranging comparisons. Most studies (77%) were conducted in single environmental compartments, and integration was limited, hampering current understanding of MP dynamics in such lagoons. MPs were more abundant in lagoons with highly populated shores and watersheds, which support intensive human activities. On the contrary, lagoons in natural protected areas had lower abundances of MPs, mostly in sediments and organisms. Fiber/filament and fragment shapes, and polyethylene, polyester, and polypropylene polymers were predominant. MPs had accumulated in certain areas of coastal lagoons, or had been exported to the sea, depending on the influence of seasonal weather, hydrodynamics, anthropogenic pressures, and typology of MPs. It is advised that future research on MP pollution in coastal lagoons should focus on methodological aspects, assessment/monitoring of pollution itself, MP dynamics and impacts, and prevention measures as part of a sound environmental management.

Microplastics in surface sediments of a highly urbanized wetland

This study investigates the incidence of MPs in surface sediment samples, collected from the Anzali Wetland, Gillan province, North of Iran. This natural habitat receives municipal wastewater effluents and hosts industries and recreational activities that could release plastic to the wetland. There is need for studies to understand MPs pollution in wetlands. A total of 40 superficial sediment samples were taken covering potential pollution hotspots in the wetland. The average level of MPs was 362 ± 327.6 MP/kg: the highest MPs levels were near the outlet of a highly urbanized river (Pirbazar River) (1380 MP/kg), which runs through Rasht city. This was followed by 1255 MP/kg where there was intense fishing, boating and tourism activities in the vicinity of Bandar-e Anzali city. Fibers were the most common type of MPs (80% of the total MPs detected). The MPs polluting the wetland were predominantly white/transparent (42%), and about 40% of them were >1000 μm. Polypropylene (PP) and polyethylene (PE) prevailed in MPs found. MPs were characterized with polarized light microscopy, Raman spectroscopy, Scanning Electron Microscopy coupled with Energy-Dispersive X-ray spectroscopy. Microplastics levels were found to correlate significantly (p > 0.7) with electrical conductivity (EC) and sand-size fraction of the sediments. Coarse-grained sediments presented large capacity to lodge the MPs. This study can be used to establish protection policies in wetlands and newly highlights the opportunity of intercepting MPs in the Anzali Wetland, which are generally >250 μm, before they fragment further.

Recent advances on the effects of microplastics on elements cycling in the environment

Microplastics (<5 mm) are an emerging pollutant which have received increasing concern in recent years. Microplastics pose a serious hazard and potential risk to the environment due to their migration, transformation, adsorption and degradation properties. The effects of different types of microplastics on the elemental cycles (carbon, nitrogen and phosphorus cycles) in ecosystems were comprehensively summarized. The impacts of microplastics on the element cycle occur mainly in the soil environment and to less extent in other environments. Microplastics affect carbon sources, carbon dioxide (CO₂) emissions, and carbon conversion processes, mainly by affecting plant and animal activities, changing gene abundance, enzyme activity, and microbial community composition. Microplastics can affect nitrogen sources, nitrogen fixation, ammonification, nitrification and denitrification processes by changing gene abundance, enzyme activity and microbial community composition. Microplastics can also influence phosphorus content and phosphorus conversion processes by stimulating enzyme activity and changing the composition of microbial communities. Future research needs to analyze the coupling of multiple microplastics and influencing factors on elemental cycling processes. This work provides a better view of the impacts of microplastics on element cycles and the interaction between microplastics and organisms.

Riverine microplastics derived from mulch film in Hainan Island: Occurrence, source and fate

Mulch film (MF) residues is an important source of microplastics (MPs) in farmland, but its transportation risk to the wider environment was still unknown. Some researches have pursued the sources of MPs found in exorheic rivers. Even so, a systematic study depicting the occurrence, source and fate of microplastics derived from mulch films (MPMF), the crucial component of MPs in farmlands, in exorheic rivers still lacking. Here, the combination of UV-Vis Raman spectroscopy and X-ray photoelectron spectroscopy (XPS) was used to identify the full-size MPMF (1-5000 μm) in field sediment samples collected by single-diagonal systematic sampling. This study verified that MPMF, a polyethylene-matrix composite doped with additives, contributed a considerable part of MPs detected in upstream farmland soil and riverine sediments, and even had an abundance of 38 ± 11 items/kg to 82 ± 15 items/kg, accounting for 9.0%-13.7% of the total MPs in estuary sediments. Notably, upstream farmland was identified to the main source of the riverine MPMF by partial least square path modeling (PLS-PM), contributing to 94.7% of MPMF in riverside sediments and 85.0% of MPMF in estuary sediments. Our study first demonstrates that MPMF constitutes a non-negligible component of MPs in estuarine sediments and underlines the urgency of strengthening the management of MPs pollution in drainage areas with a high agricultural intensity.

Press perturbations of microplastics and antibiotics on freshwater micro-ecosystem: Case study for the ecological restoration of submerged plants

Microplastics (MPs) can adsorb antibiotics to form complex pollutants, which seriously threatens the health of freshwater ecosystems. Few studies have examined the combined pollution characteristics of microplastics (MPs) and antibiotics in restored freshwater ecosystems and their effects on the growth traits of the aquatic primary producers. We studied both the ecotoxicological effects of polyethylene (PE) MPs and the antibiotics sulfanilamide (sulfa, SA) on the structural (diversity etc.,) and functional (nutrient cycling etc.,) properties of water-plant-sediment ecosystems. The synergistic toxic effects of PE and SA resulted in a reduction in the chlorophyll content and chloroplast fluorescence. Meanwhile, PE and SA single/combined pollution stress inhibits the radial oxygen loss in roots, and activates the antioxidant defense system in leaves. The change in the growth response characteristics of Vallisneria natans (V. natans) under oxidative stress induced by single/combined pollution showed a dosage effect. The microbial compositions of the overlying water and sediment were significantly changed by the pollution exposure, as evidenced by the increased microbial diversity and altered microbial taxa distribution. An increase in the total concentrations of sulfa in the overlying water was accompanied by an increase in the relative abundances of resistance genes. PE-MPs significantly affected the removal of total nitrogen and antibiotics from the overlying water. The interaction between PE and SA affects ammonia and nitrite nitrogen exchange in water-sediment systems. Thus, this study investigated the effects of combined MP and antibiotics pollution on the growth state, metabolic function, microbial community structure and microbial diversity of the freshwater ecosystems. The mechanism underlying of the combined polyethylene-sulfanilamide (PE-SA) effect on the V. natans was revealed. In addition, the correlation between different environmental factors was analyzed, and a structural equation model was constructed. This study provides primary data for evaluating the ecological and environmental effects of combined PE-SA pollution and its possible risks. Moreover, it provides a reference index for the study of ecological wetland environments and phytoremediation.

Algae-containing raw water treatment and by-products control based on ClO2 preoxidation-assisted coagulation/precipitation process

Eutrophication has become a great concern in recent years with the algae blooms in source water resulting in a serious threat posing to the safety of drinking water. Chlorine dioxide (ClO₂) has been served as an alternative oxidant for preoxidation or disinfection during drinking water treatment process due to its high oxidation efficiency and low risk of organic by-products formation. However, the generation of inorganic by-products including chlorite (ClO₂^-) and chlorate (ClO₃^-) has become a potential problem when applied in drinking water treatment. In this study, ClO₂ preoxidation-assisted coagulation/precipitation process was applied to improve the raw water quality, especially algae, turbidity, chemical oxygen demand (COD_Mn), and UV₂₅₄, and explore the formation mechanisms of inorganic by-products. It was found that the polymeric aluminum chloride (PAC) and ClO₂ have shown the best raw water treatment performance with the optimal dosage of 10 mg/L and 0.8 mg/L, respectively. Moreover, the initial pH also has exhibited a notable influence on pollutants treatment and by-products generation. Due to the adverse influence of algae and natural organic matters (NOM) and the generation of by-products, it was significant to investigate their inhibition effect on the water quality and the production of ClO₂^- and ClO₃^- in the ClO₂ preoxidation-assisted coagulation/precipitation process. Moreover, it was applicable of this process to apply for the algae-containing raw water (calculated as Chl.a lower than 50 μg/L) treatment with the ClO₂ dosage of less than 0.8 mg/L to achieve optimum treatment performance and minimum by-products generation.

Microplastics in urban runoff: Global occurrence and fate

Public concerns on microplastic (MP) pollution and its prevalence in urban runoff have grown exponentially. Huge amounts of MPs are transported from urban environments via surface runoff to different environment compartments, including rivers, lakes, reservoirs, estuaries, and oceans. The global concentrations of MPs in urban runoff range from 0 to 8580 particles/L. Understanding the sources, abundance, composition and characteristics of MPs in urban runoff on a global scale is a critical challenge because of the existence of multiple sources and spatiotemporal heterogeneity. Additionally, dynamic processes in the mobilization, aging, fragmentation, transport, and retention of MPs in urban runoff have been largely overlooked. Furthermore, the MP flux through urban runoff into rivers, lakes and even oceans is largely unknown, which is very important for better understanding the fate and transport of MPs in urban environments. Here, we provide a critical review of the global occurrence, transport, retention process, and sinks of MPs in urban runoff. Relevant policies, regulations and measures are put forward. Future global investigations and mitigation efforts will require us to address this issue cautiously, cooperating globally, nationally and regionally, and acting locally.

Widespread occurrence of microplastics in marine bays with diverse drivers and environmental risk

Microplastic contamination in the sediment of marine bays has attracted widespread attention, whereas the distribution, sedimentation, morphology and risk of microplastics at regional scale remain poorly understood. By introducing a data mining framework into microplastic research, we compiled a microplastic dataset of 649 samples from 24 bays to enhance the understanding of geographical difference and drivers, transfer, composition profile and environmental risk of sedimental microplastics. Microplastic abundance varied from 0.72 to 1963.96 items/kg dry weight, with higher concentrations mainly occurring in East Asian bays. The spatial pattern in abundance was driven by the river plastic emissions, aquaculture production and hydrodynamic condition. A significantly positive correlation between microplastic abundance in water and sediment was found, and microplastic sedimentation was related to polymer density, hydrodynamic conditions and sediment properties. The dominant shape and polymer of sedimental microplastics were fiber and polypropylene, respectively, and the similarity of microplastic composition decreased with increasing geographical distance. The environmental risks of microplastics were partitioned into three classes (Rank II-Rank IV) with a two-dimensional assessment system considering the bioavailability and toxicity of microplastics, and Asian bays were identified as potential high-risk areas. To reduce the environmental risk of sedimental microplastics in bays, priority should be given to the removal of microfibers, and control measures depend on the risk classes and dominant polymers. Microplastic abundance and composition were significantly affected by methodological choices regarding sampling, pretreatment and identification, suggesting a unified methodology is essential to further enhance our knowledge on the distribution and risk of microplastics in marine bays.

Differences, links, and roles of microbial and stoichiometric factors in microplastic distribution: A case study of five typical rice cropping regions in China

Microplastics (MPs), as new pollutants in agroecosystems, have already attracted widespread attention from scientists. However, our understanding of MP geographic distribution and its influencing factors across spatial scales remains poor. Here, a regional-scale field investigation was conducted to assess the distribution characteristic of MPs in five major rice-growing regions of China, and we explored the roles of biological and abiotic factors, especially stoichiometry and microbial influences on MP distribution. MPs were observed in all sampling sites, averaging 6,390 ± 2,031 items⋅kg^–1. Sizes less than 0.5 mm and black and transparent MPs dominated. Fiber, classified as one of the MP shapes, occurred most frequently. MP community analysis, firstly used in paddy soil, revealed more black MPs abundance in Henan (HE), more rayon, blue, and other colors MPs in Hunan (HN), more transparent MPs in Tianjing (TJ), and more PE MPs in Heilongjiang (DB). Higher MP community diversity was found in most south paddy soils of this study, due to a broader range of sources. C/N showed a positive relationship with pellet-shaped MP abundance and MPs of size between 2 and 5 mm (P < 0.05). Chao1 index of soil microbial communities was positively correlated with the MP abundance, MPs of size less than 0.5 mm, and fiber abundance. The minimum temperature was positively correlated with MP abundance (P < 0.05), implying the potential effects of the freeze-thaw process might exist. The regression analysis highlighted the important role of population quantity in determining MP abundance (R = 0.421, P = 0.02). This study confirmed the wide distribution of MPs in different soil depths of paddy lands in China and demonstrated that its distribution was influenced by population quantity and environmental variables, such as microbiology. These findings could provide a basis for the toxicological behavior of MPs and the potential risk to human health.

A review on the remediation of microplastics using constructed wetlands: Bibliometric, co-occurrence, current trends, and future directions

Massive prevalence of microplastics (MPs) in the environment has become one of the world's most serious environmental concerns. Human dependence on plastics has created a constant flow of MPs from different sources into natural environment, which has raised public concern regarding consequences of MPs coming into contact with the natural environment. Deploying constructed wetlands (CWs) to reduce MPs pollution is considered a promising method, however there are still barriers for breakthroughs in this technology, particularly knowledge gaps in the mechanisms affect removal process. Recognising this, we provide a comprehensive summary of current advances and theories regarding the mechanisms of occurrence in this research area. In this work, the bibliometric methods were first used to identify annual publication trends and topical topics of research interest. The selected documents were then statistically analyzed using VOSviewer and the 'bibliometrix' package in R to derive the annual productivity of countries or organizations, the most relevant affiliations, the most relevant authors, the most relevant sources, textual analysis, co-occurrence analysis, and cluster analysis of keywords. Finally, detailed information concerning the removal of MPs by CWs was summarised, covering the most common operational and design parameters (i.e., structure types, wetland plants, substrate materials, and microbial communities), to reveal how these parameters can be adjusted for more efficient MPs removal rate. Challenges and future directions were additionally proposed. It is hoped that the review will help identify current research trends, provide insight into the mechanisms of the removal process, and contribute further to the development of this important area.

Sustainable valorization of styrofoam and CO2 into syngas

Plastic is a versatile material broadly used in a variety of industries. However, the current disposal practices for plastic wastes (incineration/landfilling) add the hazardous materials into the environment. To offer a sustainable valorization platform for plastic waste, this study adopted the catalytic pyrolysis process using CO₂ as a co-feedstock. A model plastic waste collected from a seaport was waste buoy (WB), which has been widely used in fishing industry. Prior to the pyrolysis tests, the exact type of plastic in WB and the thermolytic characteristics of WB were examined. Since the WB was made of polystyrene, it was mainly converted into styrene monomer (styrene), dimer (diphenyl-1-butene), and trimer (2,4,6-triphenyl-1-hexene) from pyrolysis of WB. To further valorize/detoxify styrene derivatives into value-added syngas, catalytic pyrolysis of WB was practiced using the Ni-based catalysts (2/5/10 wt% Ni/SiO₂). The yield of H₂ from the catalytic pyrolysis process of WB was more than one magnitude higher comparing to that from the non-catalytic one. H₂ formation also increased as catalyst loading increased. When flow gas was switched from inert gas to CO₂, CO gas formation was enhanced due to the chemical reactions between CO₂ and styrene derivatives over Ni catalysts. Syngas (H₂/CO) formation under the CO₂ condition was 5 times higher in comparison to the N₂ condition in catalytic pyrolyses of WB with 10 wt% Ni/SiO₂. CO₂ also effectively suppressed coke deposition on a Ni catalyst. This study proposes a sustainable valorization and disposal platform for used plastic waste and greenhouse gas (CO₂), converting them into value-added fuel.

Microplastics aging in wastewater treatment plants: Focusing on physicochemical characteristics changes and corresponding environmental risks

Microplastics (MPs) have been frequently detected in effluent wastewater and sludge in wastewater treatment plants (WWTPs), the discharge and agricultural application of which represent a primary source of environmental MPs contamination. As important as quantitative removal is, changes of physicochemical characteristics of MPs (e.g., shapes, sizes, density, crystallinity) in WWTPs are crucial to their environmental behaviors and risks and have not been put enough attention yet. This review is therefore to provide a current overview on the changes of physicochemical characteristics of MPs in WWTPs and their corresponding environmental risks. The changes of physicochemical characteristics as well as the underlying mechanisms of MPs in different successional wastewater and sludge treatment stages that mainly driven by mechanical (e.g., mixing, pumping, filtering), chemical (e.g., flocculation, advanced oxidation, ultraviolet radiation, thermal hydrolysis, incineration and lime stabilization), biological (e.g., activated sludge process, anaerobic digestion, composition) and their combination effects were first recapitulated. Then, the inevitable correlations between physicochemical characteristics of MPs and their environmental behaviors (e.g., migration, adsorption) and risks (e.g., animals, plants, microbes), are comprehensively discussed with particular emphasis on the leaching of additives and physicochemical characteristics that affect the co-exist pollutants behavior of MPs in WWTPs on environmental risks. Finally, knowing the summarized above, some relating unanswered questions and concerns that need to be unveiled in the future are prospected. The physicochemical properties of MPs change after passing through WWTP, leading to subsequent changes in co-contaminant adsorption, migration, and toxicity. This could threaten our ecosystems and human health and must be worth investigating.

Anthropogenic particles in coypu (Myocastor coypus; Mammalia, Rodentia)' faeces: first evidence and considerations about their use as track for detecting microplastic pollution

Anthropogenic plastic litter is widespread in all environments, with particular emphasis on aquatic habitats. Specifically, although freshwater mammals are important as they are at the top of food web, research mainly focus on marine animals, while only few studies have been carried out on freshwater mammals. The main gap is that microplastics (MP) are completely understudied in freshwater mammals. Here, we reported the first evidence of the presence of anthropogenic particles (including MP) in coypu (Myocastor coypus)' faeces. Coypu is a rodent mammal inhabiting rivers and wetland areas, and we discussed our preliminary data suggesting the use of these tracks as possible future bioindicator of MP pollution in wetlands and freshwaters. We collected 30 coypu's faeces in "Torre Flavia wetland" nature reserve. Then, in laboratory, faeces were digested in 30 ml hydrogen peroxide (30%) for a week a 20 °C and analysed under stereoscope. All the suspected found MP were isolated in a petri dish, using FT-IR analysis to confirm the polymers. Overall, we recorded 444 natural and anthropogenic particles with most of items being fibres. FT-IR analysis of the 10% of the particles recovered revealed that 72% of them was not MP (mainly, polyethylene, polyethylene terephthalate, and polyamide). Also, the number of anthropogenic particles is not correlated with the faecal weight. Given that alien species, such as coypu, are widespread species, our results might have a great importance as these species and MP in faecal tracks may be used as undirect proxy of environmental bioavailability of MP pollution.

Effect of land use on microplastic pollution in a major boundary waterway: The Arvand River

The occurrence of microplastics (MPs) was investigated in the Arvand River (Iran). The Arvand River (200 Km) is a major water body that flows through land with diverse use and it meets the Persian Gulf. This study constitutes the first assessment of MP pollution (prevalence and physico-chemical characteristics) in the Arvand river, both in the sediment and in the water. MP monitoring has been carried out in 24 stations located along the river. The MP pollution found ranged between 1 and 291 items·L^-1 and 70 to 15,620 items·kg^-1 (dw), in water and sediment, respectively. The majority of MPs were fibres, black/grey and yellow/orange in colour, and mainly 250-500 μm and >1000 μm in size. Polyethylene terephthalate (PET), polypropylene (PP), nylon (NYL), high-density polyethylene (HDPE), and polystyrene (PS) were found in sediment samples. All these polymers, except HDPE, were also identified in the water samples. PET and PP were dominant in the water samples; whereas PET and PS were the most abundant in the sediments. The vicinity of urban wastewater effluents could be behind MP pollution in both water and sediments. Significant differences (p < 0.05) of MP concentrations were affected by different land uses when comparing MP levels in undisturbed natural area with urban areas. A strong correlation between MP fibres and fragments found with PCA biplots revealed their similar distribution in water. In the sediment samples, fibre and fragment MP particles were significantly correlated with colloidal particles (e.g., clay and organic matter) suggesting a relevant role of colloidal particles in the aquatic ecosystem of the Arvand River in transporting MPs. This study contributes to the better understanding of the presence of MP in major rivers, which are systems that have been scarcely investigated for this type of pollution, and it can inform interventions to reduce MP inputs to the river and sea.

Differentiation in the expression of toxic effects of polyethylene-microplastics on two freshwater fish species: Size matters

The built up of microplastic (MPs) remains is shaping a new aquatic habitat and imposes the necessity for research of the effects that these relatively new pollutants exert on organisms, environment, and human health. The purpose of the present study was to verify if there is a particle-size dependence of fish response to MPs. Thus, we exposed two freshwater fish species, the zebrafish (Danio rerio) and perch (Perca fluviatilis) for 21 days to polyethylene microplastics (PE-MPs) sized 10-45 μm and 106-125 μm. Thereafter, in the liver and gills tissues, biochemical and molecular parameters and the metabolic profile were examined. Ex-vivo characterization by ATR-FTIR spectroscopy exhibited increased concentration of 10-45 μm PE-MPs in the liver of the two fish species while 106-125 μm PE-MPs mostly concentrated in fish gills. The penetration of PE-MPs to fish and the induced oxidative stress triggered changes in lipid peroxidation, DNA damage and ubiquitination and furthermore stimulated signal transduction pathways leading to autophagy and apoptosis. The smaller PE-MPs were more potent in inducing alterations to all the latter parameters measured than the larger ones. Tissue response in both fish seems to depend on the parameter measured and does not seem to follow a specific pattern. Our results showed that there is no clear sensitivity of one fish species versus the other, against both sizes of PE-MPs they were exposed. In perch the metabolic changes in gills were distinct to the ones observed in liver, following a size dependent pattern, indicating that stress conditions are generated through different mechanisms. All the parameters employed can be suggested further as biomarkers in biomonitoring studies against PE-MPs.

Urban natural wetland as a sink for microplastics: A case from Lalu Wetland in Tibet, China

Microplastics have been reported in a wide range of aquatic habitats. The wetlands are considered to be important roles in microplastic migration in water bodies. Nevertheless, knowledge about the occurrence and fate of microplastics in urban natural wetland is still limited for us to better understand how they become a sink of microplastics. In this study, the distribution and characteristics of microplastics in surface water, surface sediments, and sediment cores of the Lalu Wetland watershed, China's highest urban wetland, were investigated in August 2020 and January 2021. The abundances of microplastics in the surface water were 0.06-3.05 MPs/L. Microplastic abundance in the surface sediment and sediment core was 0.01-1.10 MPs/g and 0-16.23 MPs/g, respectively. The abundance of microplastics in the water was significantly lower in the wetland than that in the channel in the watershed. Comparing the wetland inlet and outlet water, the microplastic interception rates were 53% in January and 95% in August. The characteristics and seasonal variation of microplastics in the Lalu Wetland implied that urban natural wetlands were good at intercepting microplastics, and vegetation growth might play an important role on the interception of microplastics by the wetland. The increasing of microplastics from bottom to top in the sediment cores of Lalu Wetland also indicated that the ecological risks of microplastics accumulation in sediments of urban natural wetland required further attention.

Can we quantify the aquatic environmental plastic load from aquaculture?

Aquaculture provides livelihoods for hundreds of millions of people, but it also forms a significant source of plastic litter that poses a serious hazard to aquatic ecosystems. How to assess and subsequently manage plastic loads from aquaculture is a pending and pressing issue for aquaculture sustainability, and an important concern for water environment monitoring and management. In this study, we developed the first framework for estimating plastic litter from aquaculture by combining data from satellite remote sensing, drones, questionnaires, and in situ measurements. By acquiring multidimensional (human and nature) and multiscale (centimeter to basin scale) data, this framework helped us understand the aquaculture farming patterns and its spatial and temporal evolution, and thus estimate the plastic load it generates and suggest effective management approaches. Applying this framework, we assessed the marine plastic load from oyster floating raft farming in the Maowei Sea, a typical mariculture bay in China, with an increasing farming area. Approximately 3840 tons of plastic waste is expected to be discharged into the sea in the next four years (the average service life of a floating raft) without improvements in aquaculture waste management. Strengthening governance, timely plastic removal, innovative replacement, and transforming farmers' behavior patterns are recommended as the subsequent measures for plastic management. This framework can be extended to other regions and other aquaculture patterns, and is applicable to local, regional, and global aquaculture plastic litter assessments. It is a source-based method for evaluating plastic pollution that is more conducive to subsequent plastic management than traditional post-contamination environmental monitoring. In the context of the global expansion of mariculture and the global commitment to action to combat plastic pollution, this approach could play a critical role in the investigation and management of plastic waste in aquatic environments.

Microplastic pollution in mountain terrains and foothills: A review on source, extraction, and distribution of microplastics in remote areas

Microplastic (MP) pollution is a critical environmental concern that exists within different mountain ecosystem compartments. This review paper highlights the source, sampling, distribution, and behavior of MPs in mountain terrains and foothills. Atmospheric transport and tourism are major sources of MP pollution in mountain ecosystems. Snow samples provide the maximum concentration of MPs compared to that of stream or ice core samples. Precipitation events considerably influence MP deposition and fallout in mountains and glaciers. PE, PP, PS, polyester, and PVC are common plastic polymers with diverse shapes, such as fibers, fragments, films, and pellets. Ecological concerns and stress due to MP accumulated in natural ecosystems have also been discussed, with considerable focus on MP transport and distribution dynamics at higher altitudes as prospects for future research. A remarkable knowledge gap was observed regarding the MP pathways in the mountainous ecosystems and the assessment of microplastic-associated additives, such as heavy metals and other toxic chemicals, including the evidence of nano-sized plastics. Furthermore, studies on the ecological and biological risks posed by MPs on remote mountains is severely limited with respect to global climate change, biodiversity loss, and influence on ecosystem services.

Microplastics can alter phytoplankton community composition

Microplastic pollution is a growing concern globally due to the risks they may pose to ecological communities. Phytoplankton are key ecological community in aquatic ecosystems providing both energy to food webs and have critical roles in ecosystem functions such as carbon cycling. To date studies on how microplastics effect phytoplankton have largely been limited to laboratory exposure studies using monocultures of algae. It remains unknown how the structure of phytoplankton communities will be influenced by growing microplastic pollution. The aim of this study was to determine how different concentrations microplastic fibers influence phytoplankton community structure. Two six-day microcosm studies were conducted testing the response of the phytoplankton community to low, medium, and high microplastics concentrations on the Georges River, Australia. The results showed the highest concentrations of microplastics significantly altered the structure phytoplankton community. These differences were largely driven by increased abundances of cyanobacteria taxa Aphanocapsa and Pseudanabaena, and to a lesser extent reduced abundances of taxa including Crucigenia and Chlamydmonas. There were no significant differences between controls and the low and medium treatments in either experiment. The high concentrations used in this experiment whilst likely rare in the environment are environmentally relevant and equivalent to some of more polluted ecosystems. The results highlight the potential risk to food webs and ecosystem functioning through altering the dynamics of primary production and provide evidence for further study examining the response of ecological communities to microplastics in the environment.