Enhanced peroxymonosulfate activation on dual active sites of N vacancy modified g-C3N4 under visible-light assistance and its selective removal of organic pollutants

Cerium oxide /Co-Co Prussian blue analogue composite catalyst for enhanced peroxymonosulfate activation for effective removal of tetracycline hydrochloride from water

In this paper, a novel CeO2/Co3[Co(CN)6]2 (CeO2/PBACo-Co) composite was prepared with co-precipitation and utilized to activate peroxymonosulfate (PMS) to eliminate tetracycline hydrochloride (TCH). Catalyst screening showed that the composite with a CeO2:PBACo-Co mass ratio of 1:5 (namely, 0.2-CeO2/PBACo-Co) had the best performance. The degradation efficiency of TCH in 0.2-CeO2/PBACo-Co/Oxone system was investigated. The experimental results illustrated that 98% of 50 mg/L TCH and 48.5% of TOC were degraded by 50 mg/L 0.2-CeO2/PBACo-Co and 400 mg/L Oxone within 120 min at 25 °C and initial pH 5.3. Recycling studies showed that the elimination rate of TCH can still achieve 85.8% after five cycles, suggesting that 0.2-CeO2/PBACo-Co composite processes good reusability. Trapping experiments and EPR tests revealed that the reaction system produced multiple active species (1O2, O2•-, SO4•-, and •OH). We proposed the catalytic mechanism of 0.2-CeO2/PBACo-Co for PMS activation, which mainly involves the promoted Co3+/Co2+ cycle by Ce3+ donated electrons. These results indicate that CeO2/PBACo-Co composite is an effective catalyst for wastewater remediation.

Degradation of Bisphenol A by Nitrogen-Rich ZIF-8-Derived Carbon Materials-Activated Peroxymonosulfate

Bisphenol A (BPA), representing a class of organic pollutants, finds extensive applications in the pharmaceutical industry. However, its widespread use poses a significant hazard to both ecosystem integrity and human health. Advanced oxidation processes (AOPs) based on peroxymonosulfate (PMS) via heterogeneous catalysts are frequently proposed for treating persistent pollutants. In this study, the degradation performance of BPA in an oxidation system of PMS activated by transition metal sites anchored nitrogen-doped carbonaceous substrate (M-N-C) materials was investigated. As heterogeneous catalysts targeting the activation of peroxymonosulfate (PMS), M-N-C materials emerge as promising contenders poised to overcome the limitations encountered with traditional carbon materials, which often exhibit insufficient activity in the PMS activation process. Nevertheless, the amalgamation of metal sites during the synthesis process presents a formidable challenge to the structural design of M-N-C. Herein, employing ZIF-8 as the precursor of carbonaceous support, metal ions can readily penetrate the cage structure of the substrate, and the N-rich linkers serve as effective ligands for anchoring metal cations, thereby overcoming the awkward limitation. The research results of this study indicate BPA in water matrix can be effectively removed in the M-N-C/PMS system, in which the obtained nitrogen-rich ZIF-8-derived Cu-N-C presented excellent activity and stability on the PMS activation, as well as the outstanding resistance towards the variation of environmental factors. Moreover, the biological toxicity of BPA and its degradation intermediates were investigated via the Toxicity Estimation Software Tool (T.E.S.T.) based on the ECOSAR system.

Rational design of animal-derived biochar composite for peroxymonosulfate activation: Understanding the mechanism of singlet oxygen-mediated degradation of sulfamethoxazole

Animal-derived biochar are identified as a promising candidate for peroxymonosulfate (PMS) activation due to the abundant aromatics and oxygen-containing functional groups. The current investigation focuses on pig carcass-derived biochar (800-BA-PBC) by ball milling-assisted alkali activation. The results showed that 800-BA-PBC could effectively activate PMS and degraded 94.2% sulfamethoxazole (SMX, 10 mg/L) within 40 min. The reaction rate constant was found to be 47 times higher than that observed with PBC. The enhanced catalytic activity is mainly attributed to the increase in specific surface area, the increase content of oxygen-containing groups on the surface, and the formation of graphitic nitrogen. The quenching tests and electron paramagnetic resonance (EPR) analysis demonstrated that 1O2 is the main active species in the degradation of SMX. Moreover, the 800-BA-PBC + PMS system can maintain excellent degradation rate under different water quality, wide pH range, and the presence of different anions. The degradation pathways of SMX in the optimal system are also evaluated through intermediate identification and DFT calculation. These results indicate that the catalytic system has high anti-interference ability and practical application potential. This investigation provides new insight into the rational design of animal-derived biochar and develops a low-cost technology for the treatment of antibiotic containing wastewater.

New insights into Co3O4-carbon nanotube membrane for enhanced water purification: Regulated peroxymonosulfate activation mechanism via nanoconfinement

Co-based peroxymonosulfate (PMS) activation system with fascinating catalytic performance has become a promising technology for water purification, but it always suffers from insufficient mass transfer, less exposed active sites and toxic metal leaching. In this work, a carbon nanotube membrane confining Co3O4 inside (Co3O4-in-CNT) was prepared and was coupled with PMS activation (catalytic membrane process) for sulfamethoxazole (SMX) removal. Compared with counterpart with surface-loaded Co3O4 (Co3O4-out-CNT), the Co3O4-in-CNT catalytic membrane process exhibited enhanced SMX removal (99.5% vs. 89.1%) within residence time of 2.89 s, reduced Co leaching (20 vs. 147 μg L-1) and more interestingly, the nonradical-to-radical mechanism transformation (from 1O2 and electron transfer to SO4•- and •OH). These phenomena were ascribed to the nanoconfinement effect in CNT, which enhanced mass transfer (2.80 × 10-4 vs. 5.98 × 10-5 m s-1), accelerated Co3+/Co2+ cycling (73.4% vs. 65.0%) and showed higher adsorption energy for PMS (cleavage of O-O bond). Finally, based on the generated abundant reactive oxygen species (ROS), the seven degradation pathways of SMX were formed in system.

A novel copper oxide/titanium membrane integrated with peroxymonosulfate activation for efficient phenolic pollutants degradation

Herein, a novel CuO catalyst functionalized Ti-based catalytic membrane (FCTM) was prepared via the regulated electro-deposition technique followed with low-temperature calcination. The morphology of CuO catalyst and oxygen vacancy (OV) content can be controlled by adjusting the preparation conditions, under optimal condition (400 °C, electrolyte as sulfuric acid), the fern-shaped CuO catalyst was formed and the OV content was up to its highest level. Under the optimal treatment condition, the 4-chlorophenol (4-CP) removal of the membrane filtration combined with peroxymonosulfate (PMS) activation (MFPA) process was up to 98.2% (TOC removal of 88.2%). Mechanism studying showed that the enhanced performance in this system was mainly due to the increased production of singlet oxygen (1O2) via the co-effect of fern-shaped CuO (increased specific surface area) and its fine-tuned OV (precursor of 1O2), which not only synergistically enhanced adsorption ability but also offered more active sites for PMS activation. Theoretical calculations showed that the OV-rich CuO displayed high adsorption energy for PMS molecule, leading to the change in OO and OH bond (tend to 1O2) of the PMS molecule. Finally, the possible three degradation pathways of 4-CP were formed by the electrophilic attacking of 1O2.

Construction of type-II scheme SnO@HfC photocatalyst for bisphenol A degradation via peroxymonosulfate activation; DFT and self-cleaning analysis

In this study, novel stannous oxide@hafnium carbide (SnO@HfC) nanocomposite was successfully manufactured by an appropriate hydrothermal scheme which was utilized for the photocatalytic degradation of BPA by stimulation of peroxymonosulfate (PMS) and self-cleaning application. Numerous methods were applied for the characterization of photocatalyst and demonstrated the successful preparation of SnO@HfC nanocomposite. The crystal structures, band structures and density of states for SnO and HfC were explored by DFT analysis. The amazing PMS stimulation performance of SnO@HfC nanocomposite originated from the establishment of a heterojunction, which led to the enhancement of the light response aptitude and the electron conduction competence of the composite. BPA was degraded by 0.75 g/L PMS and SnO@HfC at neutral pH during the period of 60 min. In order to identify active groups in the reaction procedure, quenching experiments and electron paramagnetic resonance (EPR) approaches were also used. In the subsequent active species scavenging assays, where sulfate radicals, hydroxyl radicals, holes, and superoxide radicals were engaged in the degradation of BPA. While, liquid phase mass spectrometry (LC-MS) was used to pinpoint the intermediate metabolites in the course of degradation. SnO@HfC/PMS/light system delivered excellent TOC removal efficiency and less ions leaching. The SnO@HfC nanocomposite proved good durability and reusability in continuous cycle tests along with excellent self-cleaning function on the glass substrate. The SnO@HfC nanocomposite performs admirably in terms of self-cleaning application. The SnO@HfC nanocomposite is expected to be used in the future for the treatment of wastewater that contains pharmaceuticals due to its superior stability and reusability after five consecutive cycles.

A Breakthrough in Photocatalytic Wastewater Treatment: The Incredible Potential of g-C3N4/Titanate Perovskite-Based Nanocomposites

Water pollution has emerged as a major global environmental crisis due to the massive contamination of water resources by the textile dyeing industry, organic waste, and agricultural residue. Since water is fundamental to life, this grave disregard puts lives at risk, making the protection of water resources a serious issue today. Recent research has shown great interest in improving the photocatalytic performance of graphitic carbon nitride (g-C3N4) for wastewater treatment. However, the photocatalytic removal activity of pure g-C3N4 is poor, owing to its minimal surface area, fast recombination of photo-generated electron-hole pairs, and poor light absorption. Recently, titanate perovskites (TNPs) have attracted significant attention in both environmental remediation and energy conversion due to their exceptional structural, optical, physiochemical, electrical, and thermal properties. Accordingly, TNPs can initiate a variety of surface catalytic reactions and are regarded as an emerging category of photocatalysts for sustainability and energy-related industries when exposed to illumination. Therefore, in this review article, we critically discuss the recent developments of extensively developed g-C3N4/TNPs that demonstrate photocatalytic applications for wastewater treatment. The different synthetic approaches and the chemical composition of g-C3N4/TNP composites are presented. Additionally, this review highlights the global research trends related to these materials. Furthermore, this review provides insight into the various photocatalytic mechanisms, including their potential impact and significance. Also, the challenges faced by such materials and their future scope are discussed.

Accelerated radical generation from visible light driven peroxymonosulfate activation by Bi2MoO6/doped gCN S-scheme heterojunction towards Amoxicillin mineralization: Elucidation of the degradation mechanism

A novel S-scheme photocatalyst Bi₂MoO₆ @doped gCN (BMO@CN) was prepared through a facile microwave (MW) assisted hydrothermal process and further employed to degrade Amoxicillin (AMOX), by peroxymonosulfate (PMS) activation with visible light (Vis) irradiation. The reduction in electronic work functions of the primary components and strong PMS dissociation generate abundant electron/hole (e^-/h⁺) pairs and SO₄^*-,*OH,O₂^*-reactive species, inducing remarkable degeneration capacity. Optimized doping of Bi₂MoO₆ on doped gCN (upto 10 wt%) generates excellent heterojunction interface with facile charge delocalization and e^-/h⁺ separation, as a combined effect of induced polarization, layered hierarchical structure oriented visible light harvesting and formation of S-scheme configuration. The synergistic action of 0.25 g/L BMO(10)@CN and 1.75 g/L PMS dosage can degrade 99.9% of AMOX in less than 30 min of Vis irradiation, with a rate constant (k_obs) of 0.176 min^-1. The mechanism of charge transfer, heterojunction formation and the AMOX degradation pathway was thoroughly demonstrated. The catalyst/PMS pair showed a remarkable capacity to remediate AMOX-contaminated real-water matrix. The catalyst removed 90.1% of AMOX after five regeneration cycles. Overall, the focus of this study is on the synthesis, illustration and applicability of n-n type S-scheme heterojunction photocatalyst to the photodegradation and mineralization of typical emerging pollutants in the water matrix.

Investigation on the reaction kinetic mechanism of polydopamine-loaded copper as dual-functional catalyst in heterogeneous electro-Fenton process

Heterogeneous electro-Fenton (HEF) process has been regarded as a promising method in environmental remediation. However, the reaction kinetic mechanism of the HEF catalyst for simultaneous production and activation of H₂O₂ remained confounded. Herein, the copper supported on polydopamine (Cu/C) was synthesized by a facile method and employed as a bifunctional HEFcatalyst, and the catalytic kinetic pathways were deeply investigated by using rotating ring-disk electrode (RRDE) voltammetry based on the Damjanovic model. Experimental results substantiated that a two-electron oxygen reduction reaction (2e^- ORR) and a sequential Fenton oxidation reaction were proceeded on 1.0-Cu/C, where metallic copper played a crucial role in the fabrication of 2e^- active sites as well as utmost H₂O₂ activation to produce highly reactive oxygen species (ROS), resulting in the high H₂O₂ productivity (52.2%) and the almost complete removal of contaminant ciprofloxacin (CIP) after 90 min. The work not only expanded the idea of reaction mechanism on Cu-based catalyst in HEF process but also provided a promising catalyst for pollutants degradation in wastewater treatment.

Highly efficient peroxymonosulfate activation on Fe-N-C catalyst via the collaboration of low-coordinated Fe-N structure and Fe nanoparticles for enhanced organic pollutant degradation

Supporting Fe catalysts on N doped carbon (Fe-N-C) renders a promising way towards peroxymonosulfate (PMS) activation for water decontamination, but constructing high-efficiency Fe-N-C remains challenging due to the insufficient understanding of the structure-performance relationship. Herein, the N doped carbon nanotube supported Fe catalysts (Fe-NCNT) were prepared towards PMS activation for organic pollutants removal, in which the Fe-N coordination number and Fe species were tuned through changing the pyrolysis temperature to study their roles in PMS activation. Results showed increasing the pyrolysis temperature converted the Fe-N₄ structure in Fe-NCNT to low-coordinated Fe-N₃ structure and produced Fe nanoparticles (FeNP, encapsulated in carbon). The Fe-NCNT with Fe-N₃ and FeNP exhibited a remarkably high specific activity (0.119 L min^-1 m^-2), which was 1.8 times higher than that of Fe-NCNT with only Fe-N₄ and obviously outperformed those of the state-of-the-art PMS activators. The low-coordinated structure and FeNP promoted the PMS reduction on Fe²⁺ of Fe-N_x for •OH and SO₄^•- production, which served as major oxidants for pollutants degradation. The experimental results and theoretical calculation corroborated the low-coordinated structure and FeNP jointly enhanced the PMS adsorption and electron density on Fe center, which accelerated electron transfer from Fe center to PMS for radical production.

Peroxymonosulfate activation by magnetic CoNi-MOF catalyst for degradation of organic dye

In this work, Fe₃O₄/CoNi-MOF was synthesized by a simple solvothermal method. The catalytic performance of 0.2-Fe₃O₄/CoNi-MOF toward PMS activation was studied by degradation of 20 mg/L methylene blue (MB). The results indicated that 0.2-Fe₃O₄/CoNi-MOF had good catalytic ability, the removal rate of MB was 99.4% within 60 min with 125 mg/L PMS and 150 mg/L catalyst. Quenching experiment and electron paramagnetic resonance (EPR) analysis revealed that the singlet oxygen (¹O₂), superoxide radical (•O₂^-) and sulfate radical (SO₄^•-) played a crucial role in the catalytic degradation process. Meantime, mechanism of PMS activation by 0.2-Fe₃O₄/CoNi-MOF was proposed, the electrons donated by Fe²⁺ can also enhance the Co-Ni cycles. In conclusion, Fe₃O₄/CoNi-MOF composite catalyst has the advantages of simple preparation, excellent catalytic activity and reusability, which is an effective catalyst for water pollution control.

Applications of vacancy defect engineering in persulfate activation: Performance and internal mechanism

The vacancy defects in heterogeneous catalysts have received extensive attention for persulfate (PS) activation. Vacancy defects can tune the electronic structure of metal oxides and generate unsaturated coordination sites. Meanwhile, the adsorption energy of reactants on catalyst surface is optimized. Thereby, the reaction energy barrier between catalysts and PS decreases, which could promote catalytic activation and accelerate pollutants degradation. Nowadays, oxygen vacancy (OV), nitrogen vacancy (NV), sulfur vacancy (SV), selenium vacancy (SeV) and titanium vacancy (TiV) have been widely studied with great potential for water remediation. So far, no review was reported regarding the vacancy activated persulfate systems. This paper summarized the types, preparation, mechanism and applications of vacancy in PS systems systematically. In addition, we put forward possible development of vacancy engineering in PS activation systems. It is expected that this review will contribute to the controllable synthesis and applications of vacancies in catalysts for PS activation and contaminants removal.

Rapid removal of high-concentration Rhodamine B by peroxymonosulfate activated with Co3O4-Fe3O4 composite loaded on rice straw biochar

In this study, rice straw biochar modified with Co₃O₄-Fe₃O₄ (RSBC@Co₃O₄-Fe₃O₄) was successfully prepared via calcinating oxalate coprecipitation precursor and employed as a catalyst to activate peroxymonosulfate (PMS) for the treatment of Rhodamine B (RhB)-simulated wastewater. The results indicated that RSBC@Co₃O₄-Fe₃O₄ exhibited high catalytic performance due to the synergy between Co₃O₄ and Fe₃O₄ doping into RSBC. Approximately 98% of RhB (180 mg/L) was degraded in the RSBC@Co₃O₄-Fe₃O₄/PMS system at initial pH 7 within 15 min. The degradation efficiency of RhB maintained over 90% after the fourth cycle, illustrating that RSBC@Co₃O₄-Fe₃O₄ displayed excellent stability and reusability. The primary reactive oxygen species (ROS) answerable for the degradation of RhB were ¹O₂, •OH, and SO₄^•-. Moreover, the intermediates involved in the degradation of RhB were identified and the possible degradation pathways were deduced. This work can provide a new approach to explore Co-based and BC-based catalysts for the degradation of organic pollutants.

New insight into enhanced photocatalytic selectivity of g-C3N4 by nitrogen vacancy introduction: Experimental study and theoretical calculation

Constructing photocatalyst with both high efficiency and selectivity is highly desired in water treatment process. However, it is difficult to realize the selectivity of photocatalysis due to the non-selective oxidative species produced in this process. Herein, for the first time, the photocatalytic selectivity was achieved on g-C₃N₄ (CN) through N vacancy introduction for effective removal of organic pollutants, and the mechanism of vacancy induced selectivity enhancement was studied. The nitrogen vacancy modified CN (VCN) showed enhanced photocatalytic activity and unique selectivity towards phenolic compounds with electron-donating group, whose kinetic constant for p-aminophenol (p-NH₂) degradation was 5.95 times higher than that over CN. Moreover, VCN photocatalytic system also displayed similar selectivity in binary pollutant systems. Characteristics and theoretical calculation results confirmed the enhanced photocatalytic performance and selectivity of VCN was mainly attributed to the effect of N vacancy. On one hand, electron-deficient N vacancy enhanced the adsorption of the O₂ and phenolic compounds, which promoted the production of O₂^•- and strengthened the photocatalytic surface reaction. On the other hand, the N vacancy preferred to adsorb the electron-donating groups of phenolic compounds, which resulted in their selective removal.

Self-supporting nanoporous CoMoP electrocatalyst for hydrogen evolution reaction in alkaline solution

Efficient catalysts with low costs are very important for hydrogen production. In this work, a nanoporous CoMoP (np-CoMoP) bimetallic phosphide catalyst with a self-supporting structure was prepared by the electrochemical dealloying method. The introduction of Mo tuned the electronic structures around Co and P, optimized the desorption of the H atom, and improved the catalytic activity of cobalt phosphide. The prepared nanoporous Co₆₅Mo₁₅P₂₀ (np-Co₆₅Mo₁₅P₂₀) structures promoted electron transfer and provided more active sites, exhibiting superior hydrogen evolution reaction (HER) performance with the overpotential of 40.8 mV at 10 mA cm^-2 and Tafel slope of 46.2 mV dec^-1 in alkaline solution. Also, the catalysts exhibited good long-term stability.

Flexible construct of N vacancies and hydrophobic sites on g-C3N4 by F doping and their contribution to PFOA degradation in photocatalytic ozonation

N vacancies, hydrophobic sites and electron rich zone were simply regulated by doping F into g-C₃N₄ (CN) to accelerate photocatalytic ozonation of PFOA. Activity of F-CN was superior to that of CN, with 74.3% PFOA removal by F-CN/Vis/O₃ but only 57.1% by CN/Vis/O₃. Experimental results and theory simulations suggested that the photogenerated hole (h_vb⁺) oxidation with the help of N vacancies was vital for PFOA degradation. N vacancies on both CN and F-CN would trap O atom of PFOA and seize electron from α -CF₂ group, which made PFOA more easily to be oxidized. Doping of F narrowed band gap, lowered the valence band position and enhanced the oxidation potential of h_vb⁺. The hydrophobic sites would accelerate the mass transfer of O₃ and PFOA, enhance O₃'s single electron reduction with e_cb^- to generate hydroxyl radicals (•OH) and reduce the recombination of h_vb⁺-e_cb^-. Under the joint function of h_vb⁺, N vacancies and •OH, PFOA degradation in F-CN/Vis/O₃ proceeded through the gradually shortening of perfluoroalky chain and loss of CF₂ unit. The acute and chronic toxicity of generated short-chain perfluorocarboxylic acid toward fish, green algae daphnid were predicted by ECOSAR. And the toxicity change of solutions was examined by luminescent bacteria.

Visible-light-assisted peroxymonosulfate activation by metal-free bifunctional oxygen-doped graphitic carbon nitride for enhanced degradation of imidacloprid: Role of non-photochemical and photocatalytic activation pathway

Bifunctional oxygen-doped graphitic carbon nitride (OCN) was fabricated to activate peroxymonosulfate (PMS) for degrading imidacloprid (IMD). The modulated electronic structure of OCN promoted the adsorption, electron transfer, and formation of the redox site of PMS. The light absorption capacity, and the separation and migration speed of photogenerated carriers of OCN were increased. Consequently, 94.5% of IMD (3.0 mg/L) was removed by OCN-10/PMS process in 2.0 h. Compared with g-C₃N₄/PMS (0.048 h^-1), the IMD degradation rate constant of OCN-10/Vis/PMS system (1.501 h^-1) was increased by 30.3 times. The PMS oxidation on electron-deficient C atoms and holes, the PMS reduction around electron-rich O atoms and photogenerated electrons, and the multiple reactions of superoxide radical were the sources of the main active species singlet oxygen. Moreover, even under different pH conditions, coexisting anions, humic acid, and other neonicotinoid pesticides, the OCN-10/Vis/PMS system still showed acceptable applicability. Finally, mass spectrometry identified that hydroxylation and N-dealkylation of amines were the primary degradation pathways of IMD. This paper demonstrates an environmental-friendly combined activation strategy of PMS that can be operated day and night with low energy consumption, aiming to pave the way for developing metal-free photocatalysts for high-efficient environmental purification based on advanced oxidation coupling technology.

Sulfur vacancies on MoS2 enhanced the activation of peroxymonosulfate through the co-existence of radical and non-radical pathways to degrade organic pollutants in wastewater

The enhancement of vacancies in catalysts involving Fenton-like reactions is a promising way to remove organic pollutants in wastewater, but sulfur vacancies are rarely involved. In this work, MoS₂ containing defect sites were synthesized by a simple high-temperature treatment and then applied for activating peroxymonosulfate to eliminate organic pollutants in wastewater. The structure was characterized by several techniques such as XRD, BET, and XPS. Important influencing factors were systemically investigated. The results indicated that MoS₂ with sulfur vacancies possessed a higher catalytic activity than that of the parent MoS₂. The annealing temperature of the catalyst had a great effect on the removal of organic pollutants. Besides, the catalytic system had a wide pH range. Quenching and electron paramagnetic resonance (EPR) experiments indicated that the reaction system contained radical and non-radical species. The characterization results revealed that the defect sites in catalysts mainly strengthened the activity of catalysts. This study offers a new heterogeneous catalyst for the removal of organic pollutants via the peroxymonosulfate-based Fenton-like reactions.

Sulfur vacancies on MoS2 enhanced the activation of peroxymonosulfate to remove organic pollutants in wastewater.

Enhanced photocatalytic degradation of 4-chlorophenol under visible light over carbon nitride nanosheets with carbon vacancies

Two-dimensional graphitic carbon nitride (g-C₃N₄, GCN) is considered as one of the promising visible light-responsive photocatalysts for energy storage and environmental remediation. However, the photocatalytic performance of pristine GCN is restricted by the inherent shortcomings of rapid charge carrier recombination and limited absorption of visible light. Vacancy engineering is widely accepted as the auspicious approach for boosting the photocatalytic activity of GCN-based photocatalysts. Herein, a magnesium thermal calcination method has been developed to reconstruct GCN, in which magnesium serves as a carbon etcher for introducing carbon vacancies and pores into GCN (V_c-GCN). The fabricated V_c-GCN demonstrates excellent photocatalytic performances of degrading hazardous 4-chlorophenol under visible light irradiation benefiting from the improved carrier separating and light absorption ability as well as rich reactive sites. The optimal V_c-GCN sample delivers 2.3-fold enhancement from the pristine GCN. The work provides a tactic to prepare GCN photocatalysts with controllable carbon vacancies and for a candidate for the degradation of organic pollutants from the environment.

Activation of Peroxymonosulfate Using Secondary Pyrolysis Oil-Based Drilling Cuttings Ash for Pollutant Removal

In this study, the utilization of secondary pyrolysis oil-based drilling cuttings ash (OBDCA-sp) to activate peroxymonosulfate (PMS) for pollutant removal was investigated. The chemical and physical properties of OBDCA-sp were explicitly analyzed via multiple characterization. The activation efficiency of OBDCA-sp for PMS was tested using humic acid (HA) as the target pollutant. 92% of HA and 52% of total organic carbon in solution could be removed using OBDCA-sp-activated PMS under optimal conditions: OBDCA-sp dosage at 4 g/L, PMS concentration at 4 mmol/L, HA concentration at 10 mg/L, and pH value at 7. After four cycles, 84% removal rate of HA could still be achieved using OBDCA-sp to activate PMS. The main catalysis elements for PMS activation in OBDCA were postulated to be Fe(III), Co(III), and Mn(III), based on X-ray photoelectron spectroscopy and X-ray diffraction results. The results of the quenching experiment indicated that SO4 •-, •OH, and 1O2 were the main reactive oxygen species (ROS) and that 1O2 was the dominant ROS in the HA removal process. Radical trapping experiments indicated the presence of SO4 •-, •OH, and 1O2 in the reaction system. This study presented a novel utilization path of OBDCA in the field of environmental remediation.

High carrier separation efficiency for a defective g-C3N4 with polarization effect and defect engineering: mechanism, properties and prospects

Different types of defects in g-C3N4 induce polarization effect to promote the separation of charge carriers and improve the photocatalytic efficiency.