An overview of homogeneous and heterogeneous photocatalysis applications for the removal of pharmaceutical compounds from real or synthetic hospital wastewaters under lab or pilot scale

Photocatalytic systems: reactions, mechanism, and applications

The photocatalytic field revolves around the utilization of photon energy to initiate various chemical reactions using non-adsorbing substrates, through processes such as single electron transfer, energy transfer, or atom transfer. The efficiency of this field depends on the capacity of a light-absorbing metal complex, organic molecule, or substance (commonly referred to as photocatalysts or PCs) to execute these processes. Photoredox techniques utilize photocatalysts, which possess the essential characteristic of functioning as both an oxidizing and a reducing agent upon activation. In addition, it is commonly observed that photocatalysts exhibit optimal performance when irradiated with low-energy light sources, while still retaining their catalytic activity under ambient temperatures. The implementation of photoredox catalysis has resuscitated an array of synthesis realms, including but not limited to radical chemistry and photochemistry, ultimately affording prospects for the development of the reactions. Also, photoredox catalysis is utilized to resolve numerous challenges encountered in medicinal chemistry, as well as natural product synthesis. Moreover, its applications extend across diverse domains encompassing organic chemistry and catalysis. The significance of photoredox catalysts is rooted in their utilization across various fields, including biomedicine, environmental pollution management, and water purification. Of course, recently, research has evaluated photocatalysts in terms of cost, recyclability, and pollution of some photocatalysts and dyes from an environmental point of view. According to these new studies, there is a need for critical studies and reviews on photocatalysts and photocatalytic processes to provide a solution to reduce these limitations. As a future perspective for research on photocatalysts, it is necessary to put the goals of researchers on studies to overcome the limitations of the application and efficiency of photocatalysts to promote their use on a large scale for the development of industrial activities. Given the significant implications of the subject matter, this review seeks to delve into the fundamental tenets of the photocatalyst domain and its associated practical use cases. This review endeavors to demonstrate the prospective of a powerful tool known as photochemical catalysis and elucidate its underlying tenets. Additionally, another goal of this review is to expound upon the various applications of photocatalysts.

Synthesis and Characterization of Composite WO3 Fibers/g-C3N4 Photocatalysts for the Removal of the Insecticide Clothianidin in Aquatic Media

Photocatalysis is a prominent alternative wastewater treatment technique that has the potential to completely degrade pesticides as well as other persistent organic pollutants, leading to detoxification of wastewater and thus paving the way for its efficient reuse. In addition to the more conventional photocatalysts (e.g., TiO2, ZnO, etc.) that utilize only UV light for activation, the interest of the scientific community has recently focused on the development and application of visible light-activated photocatalysts like g-C3N4. However, some disadvantages of g-C3N4, such as the high recombination rate of photogenerated charges, limit its utility. In this light, the present study focuses on the synthesis of WO3 fibers/g-C3N4 Z-scheme heterojunctions to improve the efficiency of g-C3N4 towards the photocatalytic removal of the widely used insecticide clothianidin. The effect of two different g-C3N4 precursors (urea and thiourea) and of WO3 fiber content on the properties of the synthesized composite materials was also investigated. All aforementioned materials were characterized by a number of techniques (XRD, SEM-EDS, ATR-FTIR, Raman spectroscopy, DRS, etc.). According to the results, mixing 6.5% W/W WO3 fibers with either urea or thiourea derived g-C3N4 significantly increased the photocatalytic activity of the resulting composites compared to the precursor materials. In order to further elucidate the effect of the most efficient composite photocatalyst in the degradation of clothianidin, the generated transformation products were tentatively identified through UHPLC tandem high-resolution mass spectroscopy. Finally, the detoxification effect of the most efficient process was also assessed by combining the results of an in-vitro methodology and the predictions of two in-silico tools.

Accelerated mineralization of textile wastewater under 222 nm irradiation from Kr/Cl2 excilamp: an environmentally friendly and energy efficient approach

The textile dyeing and manufacturing industry is the major producer of significant amounts of wastewater that contain persistent substances such as azo dyes that require adequate remediation measures. Far ultraviolet at 222 nm light may provide an advantage for contaminants degradation as compared to conventional UV sources (254 nm). In this paper, the degradation of reactive black 5 (RB5) in artificial wastewater has been performed using a 222 nm Kr/Cl2 excimer source under direct photolysis and an advanced oxidation process using TiO2/H2O2. The solution pH, catalyst concentration, 222 nm intensity, initial concentration of dye, and addition of H2O2 influence the degradation rate constant. The molar absorption coefficient, quantum yield of RB5 at 222 nm and the electrical energy per order (EEO) from different treatment methods have been reported. RB5 shows 1.26 times higher molar absorption at 222 nm than at 254 nm. The EEO for excimer-222/H2O2 ( ∼ 13 kWh/m3) is five times lower than that of the excimer-222/TiO2 process, which makes the process energy efficient. The degradation of wastewater has been carried out at three distinct pH values (2, 6, and 10), and the pH level of 10 exhibited the highest degree of degradation. The degradation rate in the alkaline medium is 8.27 and 2.05 times higher than in the acidic or ambient medium. Since textile effluent is highly alkaline, this result is significant, as no neutralization of the wastewater is required, and direct treatment is possible. A possible degradation pathway has been established based on Fourier transform infrared spectroscopy (FTIR) and high resolution mass spectroscopy (HRMS) analysis. The phytotoxicity of the treated wastewater has also been evaluated for its suitability for reuse in agriculture. The study reveals that the excimer-222/H2O2 treated wastewater significantly enhanced the germination percentage of Raphanus sativus seed (97%) compared to dye wastewater-grown seeds (75%). This work offers crucial information for future studies on the direct and indirect photolysis of azo dyes, as well as insight into the process of RB5 degradation under Kr/Cl2 excimer radiation.

A Comparison of RML Prion Inactivation Efficiency by Heterogeneous and Homogeneous Photocatalysis

Prions are proteinaceous pathogens responsible for a variety of devastating diseases in mammals, including scrapie in sheep and goats, chronic wasting disease in cervids, and Creutzfeldt-Jakob disease (CJD) in humans. They are characterized by their exceptional persistence to common inactivation procedures. This applies to all possible sources of prion contamination as prions may be present in the tissues and biological fluids of infected individuals. Hence, efficient prion inactivation procedures are still being sought to minimize the risk of intra- or inter-species transmission. In the past, photocatalytic treatment has been proven to be capable of efficiently oxidizing and inactivating prions. In the present study, the efficacy of homogeneous photo-Fenton-based photocatalysis as well as heterogeneous photocatalysis with TiO2 in reducing RML mouse scrapie infectivity was evaluated. Prion inactivation was assessed by means of a bioassay, and the results were confirmed by in vitro experiments. While the prion infectivity of the RML mouse scrapie was reduced after treatment with the photo-Fenton reagent, the heterogeneous photocatalytic treatment of the same prion strain completely eliminated prion infectivity.

Synthesis and characterization of TiO2-based supported materials for industrial application and recovery in a pilot photocatalytic plant using chemometric approach

In this contribution, the performance of powdered titanium dioxide (TiO2)-based photocatalysts was evaluated in a pilot photocatalytic plant for the degradation of different dyes, with an investigated volume of 1 L and solar simulated light as irradiation source. Five different samples, synthesized in our laboratories, were tested in the pilot plant, each consisting of TiO2 nanoparticles (NPs) coupled with a different material (persistent luminescent material and semiconductor material) and treated in different thermal conditions. All synthesized samples have been subjected to X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), Brunauer-Emmett-Teller analysis (BET), and transmission electron microscopy (TEM) characterization, to shed light on the influence of introducing other materials on titania characteristics. To study and evaluate the significance of the parameters affecting the process in the pilot plant, a chemometric approach was applied, by selecting a mathematical model (D-Optimal) to simultaneously monitor a large number of variables (i.e., 7), both qualitative and quantitative, over a wide range of levels. At the same time, the recovery of the synthesized photocatalysts was studied following a novel promising recuperation method, i.e., annulling the surface charge of the suspended samples by reaching the isoelectric point (pHPZC) of each sample, for the quantitative precipitation of TiO2 nanoparticles.

Oxidative treatment of micropollutants present in wastewater: A special emphasis on transformation products, their toxicity, detection, and field-scale investigations

Micropollutants have become ubiquitous in aqueous environments due to the increased use of pharmaceuticals, personal care products, pesticides, and other compounds. In this review, the removal of micropollutants from aqueous matrices using various advanced oxidation processes (AOPs), such as photocatalysis, electrocatalysis, sulfate radical-based AOPs, ozonation, and Fenton-based processes has been comprehensively discussed. Most of the compounds were successfully degraded with an efficiency of more than 90%, resulting in the formation of transformation products (TPs). In this respect, degradation pathways with multiple mechanisms, including decarboxylation, hydroxylation, and halogenation, have been illustrated. Various techniques for the analysis of micropollutants and their TPs have been discussed. Additionally, the ecotoxicity posed by these TPs was determined using the toxicity estimation software tool (T.E.S.T.). Finally, the performance and cost-effectiveness of the AOPs at the pilot scale have been reviewed. The current review will help in understanding the treatment efficacy of different AOPs, degradation pathways, and ecotoxicity of TPs so formed.

Synthesis, characterization, and application of Cu-substituted LaNiO3 perovskites as photocatalysts and/or catalysts for persulfate activation towards pollutant removal

The presence of emerging contaminants in environmental aqueous matrices is an ever-growing problem, since conventional wastewater treatment methods fail to adequately remove them. Therefore, the application of non-conventional methodologies such as advanced oxidation processes is of great importance to tackle this modern problem. Photocatalysis as well as catalytic activation of persulfates are promising techniques in this field as they are capable of eliminating various emerging contaminants, and current research aims to develop new materials that can be utilized for both processes. In this light, the present study focused on the use of a simple sol-gel-combustion methodology to synthesize Cu-substituted LaNiO3 perovskite materials in an attempt to improve the photocatalytic and catalytic performance of pure LaNiO3, using molar ratios of Cu:Ni that have not been previously reported in the literature. The morphological, structural, and optical features of the synthesized materials were characterized by a series of analytical techniques (e.g., X-ray diffraction, Fourier-transform infrared spectroscopy, scanning electron microscopy, diffuse reflectance spectroscopy, etc.). Also, their performance as photocatalysts, persulfate anion activators and simultaneously as photocatalysts/persulfate anion activators (hybrid) was evaluated by conducting laboratory-scale experiments using phenol (phenolics) as a model emerging contaminant. Interestingly, the results revealed that LaCu0.25Ni0.75O3 exhibited the best efficiency in all the applied processes, which was mainly attributed to the introduction of oxygen vacancies in the structure of the substituted material. The contribution of selected reactive species in the hybrid photocatalytic/catalytic experiments utilizing LaCu0.25Ni0.75O3 as a (photo)catalyst was investigated using appropriate scavengers, and the results suggested that singlet oxygen is the most dominant. Additionally, the stability of all synthesized perovskites was assessed by monitoring the concentration of the leached Cu and/or Ni cations at the end of every applied process. Finally, the reusability of LaCu0.25Ni0.75O3 was evaluated in three consecutive catalytic cycles using the hybrid experiment methodology, as this process demonstrated the best efficiency in terms of phenolics removal, and the results were rather promising.

Photocatalytic degradation of fluoroquinolone antibiotics using chitosan biopolymer functionalized copper oxide nanoparticles prepared by facile sonochemical method

Photocatalytic degradation is an excellent method for removing pharmaceutical residues due to their simplicity, ecological benignity, high efficiency, and exceptional stability. Herein, we demonstrate the sonochemically synthesised chitosan biopolymer functionalized copper oxide nanoparticles as an efficient photocatalyst for the degradation of fluoroquinolone-based antibiotics. The X-ray diffraction Rietveld refinement revealed the formation of single-phase copper oxide (CuO) with a monoclinic structure. The presence of biopolymer functionalization was corroborated by Fourier Transform Infrared spectroscopy by observing the -NH2 and -OH functional groups. The high-resolution transmission electron microscopic images inferred that Chitosan functionalized copper oxide (C-CuO) particles are nano-sized with a smooth texture and aggregation-free particles. The strong absorbance and the broad photoluminescence emission in the ultraviolet-visible region confirm the suitability of CuO and C-CuO nanoparticles for photocatalytic applications. The catalytic activity was studied against fluoroquinolone-based antibiotics such as ciprofloxacin and norfloxacin under direct sunlight illumination. Interestingly, the C-CuO catalyst demonstrated 71.07 % (@140 min.) and 71.9 % (@60 min.) of degradation for ciprofloxacin and norfloxacin, respectively. The obtained photocatalytic activity of the prepared CuO and C-CuO catalysts was superior to the CuO particles prepared by the coprecipitation method (CC-CuO).

Solar heterogeneous photo-Fenton for complete inactivation of Escherichia coli and Salmonella typhimurium in secondary-treated wastewater effluent

In this work, complete elimination of Escherichia coli and Salmonella typhimurium was achieved in 120 min using a heterogeneous photo-Fenton process under sunlight at pH 6.5 in distilled water. A face-centered composite central design 22 with one categoric factor and three replicates at the central point was used to evaluate the effect of iron (III) oxide concentration (0.8-3.4 mg L-1), H2O2 (2-10 mg L-1), and the type of iron oxide phase (maghemite and hematite) on the inactivation of both bacteria. The results showed that the amount of catalyst, H2O2 concentration and their interaction were significant factors (p < 0.05) in the elimination of the microorganisms. Thus, under the best conditions (3.4 mg L-1 of iron (III) oxide and 10 mg L-1 of H2O2) in the experimental ranges, complete inactivation of E. coli and S. typhimurium was achieved (6-log reduction) in 120 min using the photo-Fenton treatment with both iron-oxide phases. Furthermore, the photocatalytic elimination of both bacteria by the photo-Fenton process using hematite and maghemite in secondary-treated wastewater effluent was performed obtaining slower inactivation rates (1.2-5.9 times) than in distilled water due to the matrix effect of the effluent from a wastewater treatment plant. Nevertheless, the process continued to be effective in the effluent, achieving complete bacterial elimination in 150 min using the hematite phase. Additionally, the SEM images of the bacterial cells showed that the heterogeneous photo-Fenton treatment generated permanent and irreversible cell damage, resulting in complete cell death.

Oxygen vacancy-rich CeO2 decorated with Cu3BiS3 nanoparticles: Outstanding visible-light photocatalytic performance towards tetracycline degradation

Recently, the degradation of antibiotics has attracted a lot of attention all over the world, because the accumulation of these recalcitrant compounds in the environment, and their entry into the food chain have severely affected on human health. Herein, oxygen vacancy-rich CeO2 was decorated with Cu3BiS3 nanoparticles to fabricate Z-scheme CeO2-x/Cu3BiS3 photocatalysts with a simple procedure. Intriguingly, photocatalytic ability of CeO2-x/Cu3BiS3 (30%) nanocomposite in the detoxification of tetracycline hydrochloride, cephalexin, azithromycin, and rhodamine B was elevated 31.3, 28.2, 45.2, and 10.1-folds as much as CeO2, and 5.19, 5.97, 32.2, and 4.69-folds compared with the CeO2-x photocatalyst, respectively. The admirable activity of CeO2-x/Cu3BiS3 (30%) nanocomposite was ascribed to the production of many charge carriers, efficacious segregation and transfer of charges, and improved textural features, which were confirmed by UV-vis DRS, EIS, photocurrent density, PL, and BET analyses. In addition, the TC degradation pathway was investigated with LC-MS analysis, and also the biocompatibility of the purified solution was displayed with wheat seed cultivation. Regarding outstanding activity and facile synthesis, the CeO2-x/Cu3BiS3 (30%) photocatalyst could be utilized for wastewater treatment.

Advanced electrocatalytic redox processes for environmental remediation of halogenated organic water pollutants

Halogenated organic compounds are widespread, and decades of heavy use have resulted in global bioaccumulation and contamination of the environment, including water sources. Here, we introduce the most common halogenated organic water pollutants, their classification by type of halogen (fluorine, chlorine, or bromine), important policies and regulations, main applications, and environmental and human health risks. Remediation techniques are outlined with particular emphasis on carbon-halogen bond strengths. Aqueous advanced redox processes are discussed, highlighting mechanistic details, including electrochemical oxidations and reductions of the water-oxygen system, and thermodynamic potentials, protonation states, and lifetimes of radicals and reactive oxygen species in aqueous electrolytes at different pH conditions. The state of the art of aqueous advanced redox processes for brominated, chlorinated, and fluorinated organic compounds is presented, along with reported mechanisms for aqueous destruction of select PFAS (per- and polyfluoroalkyl substances). Future research directions for aqueous electrocatalytic destruction of organohalogens are identified, emphasizing the crucial need for developing a quantitative mechanistic understanding of degradation pathways, the improvement of analytical detection methods for organohalogens and transient species during advanced redox processes, and the development of new catalysts and processes that are globally scalable.

Biochar/layered double hydroxides composites as catalysts for treatment of organic wastewater by advanced oxidation processes: A review

Heterogeneous advanced oxidation process has been widely studied as an effective method for removing organic pollutants in wastewater, but the development of efficient catalysts is still challenging. This review summaries the present status of researches on biochar/layered double hydroxides composites (BLDHCs) as catalysts for treatment of organic wastewater. The synthesis methods of layered double hydroxides, the characterizations of BLDHCs, the impacts of process factors influencing catalytic performance, and research advances in various advanced oxidation processes are discussed in this work. The integration of layered double hydroxides and biochar provides synthetic effects for improving pollutant removal. The enhanced pollutant degradation in heterogeneous Fenton, sulfate radical-based, sono-assisted, and photo-assisted processes using BLDHCs have been verified. Pollutant degradation in heterogeneous advanced oxidation processes using BLDHCs is influenced by process factors such as catalyst dosage, oxidant addition, solution pH, reaction time, temperature, and co-existing substances. BLDHCs are promising catalysts due to the unique features including easy preparation, distinct structure, adjustable metal ions, and high stability. Currently, catalytic degradation of organic pollutants using BLDHCs is still in its infancy. More researches should be conducted on the controllable synthesis of BLDHCs, the in-depth understanding of catalytic mechanism, the improvement of catalytic performance, and large-scale application of treating real wastewater.

Adsorption and Photocatalytic Degradation of Methylene Blue on TiO2 Thin Films Impregnated with Anderson-Evans Al-Polyoxometalates: Experimental and DFT Study

In this work, we fabricated a TiO2 thin film, and the same film was modified with an Anderson aluminum polyoxometalate (TiO2-AlPOM). Physical-chemical characterization of the catalysts showed a significant change in morphological and optical properties of the TiO2 thin films after surface modification. We applied the kinetic and isothermal models to the methylene blue (MB) adsorption process on both catalysts. The pseudo-second order model was the best fitting model for the kinetic results; qe (mg/g) was 11.9 for TiO2 thin films and 14.6 for TiO2-AlPOM thin films, and k2 (g mg-1 min-1) was 16.3 × 10-2 for TiO2 thin films and 28.2 × 10-2 for TiO2-AlPOM thin films. Furthermore, the Freundlich model was suitable to describe the isothermal behavior of TiO2, KF (5.42 mg/g), and 1/n (0.312). The kinetics of photocatalytic degradation was fitted using the Langmuir-Hinshelwood model; kap was 7 × 10-4 min-1 for TiO2 and 13 × 10-4 min-1 for TiO2-AlPOM. The comparative study showed that TiO2 thin films reach a 19.6% MB degradation under UV irradiation and 9.1% MB adsorption, while the TiO2-AlPOM thin films reach a 32.6% MB degradation and 12.2% MB adsorption on their surface. The surface modification improves the morphological, optical, and photocatalytic properties of the thin films. Finally, the DFT study supports all the previously shown results.

MXenes and MXene-based materials for removal of pharmaceutical compounds from wastewater: Critical review

The rapid increase in the global population and its ever-rising standards of living are imposing a huge burden on global resources. Apart from the rising energy needs, the demand for freshwater is correspondingly increasing. A population of around 3.8 billion people will face water scarcity by 2030, as per the reports of the World Water Council. This may be due to global climate change and the deficiency in the treatment of wastewater. Conventional wastewater treatment technologies fail to completely remove several emerging contaminants, especially those containing pharmaceutical compounds. Hence, leading to an increase in the concentration of harmful chemicals in the human food chain and the proliferation of several diseases. MXenes are transition metal carbide/nitride ceramics that primarily structure the leading 2D material group. MXenes act as novel nanomaterials for wastewater treatment due to their high surface area, excellent adsorption properties, and unique physicochemical properties, such as high electrical conductivity and hydrophilicity. MXenes are highly hydrophilic and covered with active functional groups (i.e., hydroxyl, oxygen, fluorine, etc.), which makes them efficient adsorbents for a wide range of species and promising candidates for environmental remediation and water treatment. This work concludes that the scaling up process of MXene-based materials for water treatment is currently of high cost. The up-to-date applications are still limited because MXenes are currently produced mainly in the laboratory with limited yield. It is recommended to direct research efforts towards lower synthesis cost procedures coupled with the use of more environmentally friendly materials to avoid secondary contamination.

Potential of novel dual Z-scheme carbon quantum dots decorated MnIn2S4/CdS/Bi2S3 heterojunction for environmental applications

In this work, CQDs decorated MnIn₂S₄/CdS/Bi₂S₃ heterojunction was prepared successfully by hydrothermal technique for photocatalytic disinfection of Escherichia coli (E. coli) and mineralization of methyl orange (MO) dye. The charge transferal route and mineralization process in CQDs-MnIn₂S₄/CdS/Bi₂S₃ heterojunction were comprehensively investigated by advanced spectroscopic techniques. The improved visible-light activity and enhanced photo-generated charge transferal efficacy caused dual Z-scheme CQDs-MnIn₂S₄/CdS/Bi₂S₃ heterojunction to achieve boosted photodegradation ability. The catalytic degradation trend was followed as CQDs-MnIn₂S₄/CdS/Bi₂S₃ > MnIn₂S₄ > CdS > Bi₂S₃. The dye was mineralized within 180 min under visible light irradiation. The effect of reaction parameters, pH effect, catalyst dosage, and H₂O₂ addition on MO degradation was also investigated. The degradation rate was maximal at pH 4 with a pseudo-first-order rate constant, 0.0438 min^-1. The assessment of antibacterial properties revealed that CQDs-MnIn₂S₄/CdS/Bi₂S₃ composite effectively inactivated E. coli under visible light. Scavenging experiments, transient photocurrent response, and electron spin resonance spectroscopy suggested that ^•[Formula: see text] and holes were the dominant reactive species. The Z-scheme heterojunction is recyclable up to ten photocatalytic cycles according to recycling experiments. This research indicates the importance of dual Z-scheme CQDs decorated MnIn₂S₄/CdS/Bi₂S₃ heterojunction in wastewater remediation.

Study on the photocatalytic degradation of metronidazole antibiotic in aqueous media with TiO2 under lab and pilot scale

Nowadays, the increased consumption of antibiotics, such as metronidazole (MTZ), leads to their introduction in wastewater as well as in the receiving surface waters due to their incomplete removal by conventional wastewater treatment plants. Heterogeneous photocatalysis is a versatile technology that can efficiently degrade such organic contaminants. In the present research, the photocatalytic degradation of MTZ with TiO₂ P25 was studied under lab and pilot (CPC reactor) conditions. The antibiotic was efficiently removed at high rates in both cases (100 % and 91 %) following pseudo-first order kinetics with rate constants equal to 0.0452 min^-1 (±RSD% = 0.68 % - 2.57 %) and 0.0462 L KJ^-1 (±RSD% = 8.94 % - 21.64 %) respectively. Also, by scavenging lab scale experiments, the contribution of the generated reactive species was investigated and hydroxy radicals (HO^•) were proposed as the predominant species. By applying high resolution mass spectrometry techniques, the transformation products (TPs) were identified and possible transformation pathways were proposed. The ecotoxicity of the TPs was assessed in silico using the ECOSAR software with the results revealing that most of them were less toxic than the parent compound. Similarly, the mutagenicity, developmental toxicity and bioconcentration factors of the TPs were predicted by utilizing the T.E.S.T. software and in their majority, were found to be less mutagenic and developmentally toxic than MTZ. The ecotoxicity monitoring with the Vibrio fischeri bioassay in both laboratory and pilot scale experiments indicated that through heterogeneous photocatalysis it is possible to reduce the toxicity of wastewater containing MTZ. Finally, the stability and reusability of the photocatalyst was investigated through three consecutive catalytic cycles with the results showing that the performance of TiO₂ decreased after each use. For the heterogeneous photocatalysis with TiO₂ to be a "real life" applicable technique, further studies focusing on catalyst regeneration and optimization of the catalytic conditions must be conducted.

Removal of pharmaceutically active compounds (PhACs) by zero-valent iron: quantification of removal mechanisms consisting of degradation, adsorption and co-precipitation

The removal mechanisms of carbamazepine (CBZ), which is one of pharmaceutically active compounds, using zero-valent iron (ZVI) were quantified by defining three fractions, namely "degradation", "adsorption", and "co-precipitation". The maximum total organic carbon (TOC) removal was obtained at pH 4. The results demonstrate that the adsorption on the ZVI surface is dominant in the TOC removal of CBZ for 4 ≤ pH ≤ 6 while the degradation by oxidative and reductive reactions is efficient exclusively for pH ≤ 3. TOC removal was not obtained for pH ≥ 8. The most dominant mechanism in the removal of CBZ by ZVI is the adsorption onto the iron oxides/hydroxides layer formed on ZVI surface rather than the degradation by oxidative and reductive reactions including Fenton and Fenton-like reactions for pH ≥ 4. A novel kinetic model for removal of CBZ by ZVI was developed to simulate the dynamic concentration profiles of CBZ, TOC, total Fe ions, and dissolved oxygen linked closely with each other and the contributions of degradation, adsorption, and co-precipitation in TOC removal of CBZ. Reasonable agreement between experimental data and model predictions suggests the applicability of the proposed kinetic model to quantitatively analyze the mechanisms of CBZ removal by ZVI.

Photo-Fenton and TiO2 Photocatalytic Inactivation of Model Microorganisms under UV-A; Comparative Efficacy and Optimization

Photocatalytic inactivation of pathogens in aqueous waste is gaining increasing attention. Several homogeneous and heterogeneous photocatalytic protocols exist using the Fenton's reagent and TiO₂, respectively. A comprehensive study of homogeneous and heterogeneous photocatalysis on a range of microorganisms will significantly establish the most efficient method. Here, we report a comparative study of TiO₂- and Fe⁺³-based photocatalytic inactivation under UV-A of diverse microorganisms, including Gram-positive (Staphylococcus aureus) and Gram-negative (Escherichia coli) bacteria, bacterial spores (Bacillus stearothermophilus spores) and viruses (MS2). We also present data on the optimization of TiO₂ photocatalysis, including optimal catalyst concentration and H₂O₂ supplementation. Our results indicate that both photo-Fenton and TiO₂ could be successfully applied for the management of microbial loads in liquids. Efficient microorganism inactivation is achieved with homogeneous photocatalysis (7 mg/L Fe⁺³, 100 mg/L H₂O₂, UV-A) in a shorter processing time compared to heterogeneous photocatalysis (0.5 g/L TiO₂, UV-A), whereas similar or shorter processing is required when heterogenous photocatalysis is performed using microorganism-specific optimized TiO₂ concentrations and H₂O₂ supplementation (100 mg/L); higher H₂O₂ concentrations further enhance the heterogenous photocatalytic inactivation efficiency. Our study provides a template protocol for the design and further application for large-scale photocatalytic approaches to inactivate pathogens in liquid biomedical waste.

Photocatalytic Degradation of Inherent Pharmaceutical Concentration Levels in Real Hospital WWTP Effluents Using g-C3N4 Catalyst on CPC Pilot Scale Reactor

The objective of this work was to evaluate the efficiency of a solar photocatalytic process using g-C₃N₄ as photocatalyst on the degradation of pharmaceutical compounds detected in hospital wastewater treatment plant secondary effluents. A compound parabolic collector pilot plant, established in the secondary effluent stream of the Ioannina city hospital wastewater treatment plant, was used for the photocatalytic experiments. The analysis of the samples before and after the photocatalytic treatment was accomplished using solid phase extraction (SPE), followed by UHPLC-LTQ/Orbitrap HRMS. Initial effluent characterization revealed the presence of ten pharmaceutical compounds. Among these, amisulpride, O-desmethyl venlafaxine, venlafaxine and carbamazepine were detected in all experiments. Initial concentrations ranged from 73 ng L^-1 for citalopram to 2924.53 ng L^-1 for O-desmethyl venlafaxine. The evolution of BOD₅ and COD values were determined before and after the photocatalytic treatment. All detected pharmaceuticals were removed in percentages higher than 54% at an optimum catalyst loading ranging between 200 and 300 mg L^-1. The potential of the catalyst to be reused without any treatment for two consecutive cycles was studied, showing a significant efficiency decrease.

g-C3N4 as Photocatalyst for the Removal of Metronidazole Antibiotic from Aqueous Matrices under Lab and Pilot Scale Conditions

The presence of pharmaceuticals in water is a problem of utmost importance due to the various adverse effects that these compounds may have on aquatic organisms and also humans. Since conventional wastewater treatment plants fail to efficiently remove many of these compounds, new techniques such as heterogeneous photocatalysis have been developed that are capable of degrading them. In this study, graphitic carbon nitride (g-C3N4) was used as photocatalyst to remove metronidazole (MTZ), which is a widely prescribed antibiotic that has been reported as a potential carcinogen. The experiments were performed under lab and pilot scale conditions. During the lab scale experiments, 90.6% of the initial pharmaceutical concentration was removed after 360 min of irradiation and its removal followed a pseudo first order kinetic model with a degradation rate constant of k = 0.00618 min−1. Moreover, scavenging studies indicated that the indirectly produced hydroxy radicals contribute very little to the degradation mechanism. Through high precision mass spectrometry techniques, eight transformation products (TPs) were identified, and possible transformation pathways were suggested. Similarly, in the case of pilot scale experiments, 100 and 200 mg L−1 of g-C3N4 were used and the antibiotic’s removal also followed pseudo first order kinetics with k = 0.00827 min−1 and k = 0.00942 min−1, respectively. However, starting from low level inherent concentrations, only two TPs were identified. By using in silico tools (ECOSAR and T.E.S.T.), various ecotoxicological values were predicted for the TPs, which were generally found to be less toxic than the parent compound and with lower mutagenic and bioaccumulative potential. Moreover, the monitoring of the ecotoxicity with the in vitro Microtox bioassay showed that at the end of all the photocatalytic processes, the toxicity was reduced. In conclusion, this technique could have the potential to remove MTZ and other similar pharmaceuticals in full-scale applications. However, for this to happen with the highest possible efficiency, further studies must be conducted, focusing on improving the catalyst’s performance and reusability, improving the separation of catalyst as well as finding the optimum conditions for this process.

Heterogeneous photocatalytic oxidation for the removal of organophosphorus pollutants from aqueous solutions: A review

Organophosphorus pollutants (OPs), which are compounds containing carbon‑phosphorus bonds or phosphate derivatives containing organic groups, have received much attention from researchers because of their persistence in the aqueous environment for long periods of time and the threat they pose to human health. Heterogeneous photocatalysis has been widely applied to the removal of OPs from aqueous solutions due to its better removal effect and environmental friendliness. In this review, the removal of OPs from aqueous matrices by heterogeneous photocatalysis was presented. Herein, the application and the heterogeneous photocatalysis mechanism of OPs were described in detail, and the effects of catalyst types on degradation effect are discussed categorically. In particular, the heterojunction type photocatalyst has the most excellent effect. After that, the photocatalytic degradation pathways of several OPs were summarized, focusing on the organophosphorus pesticides and organophosphorus flame retardants, such as methyl parathion, dichlorvos, dimethoate and chlorpyrifos. The toxicity changes during degradation were evaluated, indicating that the photocatalytic process could effectively reduce the toxicity of OPs. Additionally, the effects of common water matrices on heterogeneous photocatalytic degradation of OPs were also presented. Finally, the challenges and perspectives of heterogeneous photocatalysis removal of OPs are summarized and presented.

Recent advances in application of metal-organic frameworks (MOFs) as adsorbent and catalyst in removal of persistent organic pollutants (POPs)

The presence of persistent organic pollutants (POPs) in the aquatic environment is causing widespread concern due to their bioaccumulation, toxicity, and possible environmental risk. These contaminants are produced daily in large quantities and released into water bodies. Traditional wastewater treatment plants are ineffective at degrading these pollutants. As a result, the development of long-term and effective POP removal techniques is critical. In water, adsorption removal and photocatalytic degradation of POPs have been identified as energy and cost-efficient solutions. Both technologies have received a lot of attention for their efforts to treat the world's wastewater. Photocatalytic removal of POPs is a promising, effective, and long-lasting method, while adsorption removal of persistent POPs represents a simple, practical method, particularly in decentralized systems and isolated areas. It is critical to develop new adsorbents/photocatalysts with the desired structure, tunable chemistry, and maximum adsorption sites for highly efficient removal of POPs. As a class of recently created multifunctional porous materials, Metal-organic frameworks (MOFs) offer tremendous prospects in adsorptive removal and photocatalytic degradation of POPs for water remediation. This review defines POPs and discusses current research on adsorptive and photocatalytic POP removal using emerging MOFs for each type of POPs.

Chlorophyll sensitized and salicylic acid functionalized TiO2 nanoparticles as a stable and efficient catalyst for the photocatalytic degradation of ciprofloxacin with visible light

Developing efficient and stable visible light active photocatalyst has significant environmental applications. Though dye sensitization of TiO₂ nanoparticles with natural chlorophyll pigments can potentially impart visible light activity, their long-term stability is a major concern. We investigated the functionalization of TiO₂ with salicylic acid, and subsequent sensitization with chlorophylls to improve the catalyst stability for the photocatalytic degradation of Ciprofloxacin (CPX) under visible light. A significant improvement in the degradation efficiency and catalyst stability was observed for five reuse cycles. Further, an optimum CPX degradation of ∼75% was achieved with 0.75 g L^-1 catalyst dosage of 0.1 chl/0.1 SA-TiO₂, initial pH of 6, and 10 ppm of initial CPX for a visible light exposure of 2 h. The degradation followed the pseudo-second-order kinetics. In addition, the ciprofloxacin degradation was reduced in the wastewater matrix system due to the presence of other scavenging species such as chlorides, sulphates, and alkalinity. Significant reduction in the toxicity of degradation compounds after the photocatalytic degradation was observed in comparison to parent CPX. Further, the degradation pathway and plausible mechanism of degradation of CPX were also proposed.

Homogeneous and Heterogeneous Photocatalysis for the Treatment of Pharmaceutical Industry Wastewaters: A Review

Pharmaceuticals are biologically active compounds used for therapeutical purposes in humans and animals. Pharmaceuticals enter water bodies in various ways and are detected at concentrations of ng L^-1-μg L^-1. Their presence in the environment, and especially long-term pollution, can cause toxic effects on the aquatic ecosystems. The pharmaceutical industry is one of the main sources introducing these compounds in aquatic systems through the disposal of untreated or partially treated wastewaters produced during the different procedures in the manufacturing process. Pharmaceutical industry wastewaters contain numerous pharmaceutical compounds and other chemicals and are characterized by high levels of total dissolved solids (TDS), biochemical oxygen demand (BOD) and chemical oxygen demand (COD). The toxic and recalcitrant nature of this type of wastewater hinders conventional biological processes, leading to its ineffective treatment. Consequently, there is an urgent demand for the development and application of more efficient methods for the treatment of pharmaceutical industry wastewaters. In this context, advanced oxidation processes (AOPs) have emerged as promising technologies for the treatment of pharmaceutical industry wastewaters through contaminant removal, toxicity reduction as well as biodegradability improvement. Therefore, a comprehensive literature study was conducted to review the recent published works dealing with the application of heterogeneous and homogeneous photocatalysis for pharmaceutical industry wastewater treatment as well as the advances in the field. The efficiency of the studied AOPs to treat the wastewaters is assessed. Special attention is also devoted to the coupling of these processes with other conventional methods. Simultaneously with their efficiency, the cost estimation of individual and integrated processes is discussed. Finally, the advantages and limitations of the processes, as well as their perspectives, are addressed.

The overall assessment of simultaneous photocatalytic degradation of Cimetidine and Amisulpride by using chemical and genotoxicological approaches

Pharmaceutical Active Compounds (PhACs) are of particular interest among the emerging contaminants detected in the aquatic environment. Commonly, PhACs exist as complex mixtures in aquatic systems, causing potential adverse effects to the environment and human health than those of individual compounds. Based on the increasing interest in the contamination of water resources by PhACs, the photocatalytic degradation of Cimetidine and Amisulpride as a mixture in combination with their toxic and genotoxic effects before and after the treatment were evaluated for the first time. The toxic, genotoxic and cytotoxic effects were investigated using the Trypan Blue Exclusion Test and the Cytokinesis Block MicroNucleus (CBMN) assay in cultured human lymphocytes. The photocatalytic degradation of the PhACs was studied in ultrapure water and environmentally relevant matrices using UV-A and visible (Vis) irradiation and C-TiO₂ (TiO₂ Kronos vlp 7000) as photocatalyst. High removal percentages were observed for both compounds under UV-A and Vis irradiation in ultrapure water. In lake and drinking water a slower degradation rate was shown that could be attributed to the complex composition of these matrices. Scavenging experiments highlighted the significant role of h⁺ and O₂^●- in the degradation mechanisms under both irradiation sources. Oxidation, dealkylation and deamination were the main degradation pathways. Regarding the individual compounds, Amisulpride was found to be more cytotoxic than Cimetidine. No significant differences of the genotoxic effects during the treatment were observed. However, a slight increase in cytotoxicity was observed at the first stages of the process. At the end of the process under both UV-A and Vis light, non-significant cytotoxic/toxic effects were observed. Based on the results, heterogeneous photocatalysis can be considered as an effective process for the treatment of complex mixtures without the formation of harmful transformation products.

Fabrication of ZnAl-LDH mixed metal-oxide composites for photocatalytic degradation of 4-chlorophenol

In this work, two different types of ZnAl-layered double hydroxide (LDH) mixed metal-oxide composites (CeO₂ and SnO₂) were synthesized and applied for the photodegradation of 4-chlorophenol (4-CP) in wastewater. The fabricated CeO₂/ZnAl-LDH and SnO₂/ZnAl-LDH were characterized by X-ray diffraction (XRD), Fourier transform infrared (FTIR) spectroscopy, UV-visible diffuse reflectance spectroscopy (UV-vis DRS), and theoretical density functional theory (DFT) calculations, suggesting that the band gaps of the synthesized hybrid composites were much lower than those of traditional ZnAl-LDH. In addition, the photocatalytic activity for 4-CP degradation and reaction kinetics were investigated to evaluate the catalytic behavior of the prepared composites. The results indicated that the photocatalytic process in this case followed a pseudo-first-order kinetic model, and SnO₂/ZnAl-LDH illustrated the optimum performance for 4-CP degradation with an efficiency of 95.2% due to its stability and recyclability. Additionally, the reaction mechanism of 4-CP photodegradation was studied over SnO₂/ZnAl-LDH; it presented that 4-CP could be oxidized by hydroxyl radicals, holes, and superoxide radicals, where hydroxyl radicals were identified as the dominant active species during the degradation process. Finally, decomposition intermediates were measured to deduce the reaction pathway of 4-CP, and three tentative pathways were proposed and discussed.

Trends in Fenton and photo-Fenton processes for degradation of antineoplastic agents in water matrices: current knowledge and future challenges evaluation using a bibliometric and systematic analysis

Antineoplastic agents present potential hazards to human health and the environment. For this reason, these compounds have attracted a great deal of attention from researchers in the environmental sciences field. In order to help guide future research, it is important to understand the current state of investigation of the occurrence of these microcontaminants and methods for their removal, especially focusing on Fenton and photo-Fenton processes applied to various aqueous matrices in which this class of pharmaceuticals is present. For this purpose, a systematic review of these topics was performed by bibliometric analysis of articles published during the last decade and available in the Scopus and Web of Science databases. This study enables visualization of the current panorama and trends in this field, providing a guide for future collaborative research and exchange of knowledge. Various strategies have been suggested to improve the efficiency of Fenton and photo-Fenton processes, mainly by means of the application of multiples additions of iron, the use of heterogeneous catalysts, and/or the use of chelating agents. Some studies have evaluated different radiation sources employed for photo-Fenton processes, such as solar and/or artificial radiation. In turn, the identification of transformation products generated by Fenton and photo-Fenton treatments, together with their evaluation by in silico (Q)SAR predictions or experimental toxicological bioassays, are related subjects that have been less reported in published works and that should be studied in depth. These subjects can support treatment evaluations that are more realistic, considering their limitations or potentials.

Photocatalytic Degradation of Recalcitrant Pollutants of Greywater

These days, many countries have a water shortage and have limited access to clean water. To overcome this, a new treatment is emerging, namely, the photocatalytic processing of greywater. Photocatalytic processes to remove the organic matter from different greywater sources are critically reviewed. Their efficiency in degrading the organic matter in greywater is scrutinized along with factors that can affect the activity of photocatalysts. Modified TiO2, ZnO and TiO2 catalysts show great potential in degrading organic materials that are present in greywater. There are several methods that can be used to modify TiO2 by using sol-gel, microwave and ultrasonication. Overall, the photocatalytic approach alone is not efficient in mineralizing the organic compounds, but it works well when the photocatalysis is combined with oxidants and Fe3+. However, factors such as pH, concentration and catalyst-loading of organic compounds can significantly affect photocatalytic efficiency.

Monopersulfate in water treatment: Kinetics

The kinetics of monopersulfate based systems in the elimination of potential harmful contaminants has been assessed from a theoretical point of view. A detailed reaction mechanism sustained in the generation of radicals (mainly hydroxyl and sulfate), propagation and termination stages has been proposed. The system of first order differential equations derived has numerically been solved. The effect of main influencing parameters such as contaminant and peroxymonosulfate initial concentrations, intermediate generation, presence of organic matter, role played by anions, has been theoretically obtained. Discussion of simulated results has been accomplished by comparison with experimental data found in the literature. At the sight of the theoretical and empirical data, use of simplistic pseudo first order kinetics is discouraged. Despite considering a significant number of elemental reactions, modelling of the system reveals that a high fraction of them can be neglected due to their insignificant role played in the mechanism. The entire mechanism has been tested when peroxymonosulfate has been activated by UV radiation, although results can be fairly extrapolated to other activation strategies. Finally, a generic model capable of accounting for the effect of a diversity of parameters is proposed. No theoretical background is behind the model, however the generic model clearly improves the results obtained by simple first order kinetics.

Photocatalysis and perovskite oxide-based materials: a remedy for a clean and sustainable future

The massive use of non-renewable energy resources by humankind to fulfill their energy demands is causing severe environmental issues. Photocatalysis is considered one of the potential solutions for a clean and sustainable future because of its cleanliness, inexhaustibility, efficiency, and cost-effectiveness. Significant efforts have been made to design highly proficient photocatalyst materials for various applications such as water pollutant degradation, water splitting, CO2 reduction, and nitrogen fixation. Perovskite photocatalyst materials are gained special attention due to their exceptional properties because of their flexibility in chemical composition, structure, bandgap, oxidation states, and valence states. The current review is focused on perovskite materials and their applications in photocatalysis. Special attention has been given to the structural, stoichiometric, and compositional flexibility of perovskite photocatalyst materials. The photocatalytic activity of perovskite materials in different photocatalysis applications is also discussed. Various mechanisms involved in photocatalysis application from wastewater treatment to hydrogen production are also provided. The key objective of this review is to encapsulate the role of perovskite materials in photocatalysis along with their fundamental properties to provide valuable insight for addressing future environmental challenges.

Photocatalytic Degradation Pathways of the Valsartan Drug by TiO2 and g-C3N4 Catalysts

The photocatalytic degradation of the valsartan (VLS) pharmaceutical using TiO2 and g-C3N4 catalysts under simulated solar light is studied in this paper by high-resolution Orbitrap mass spectrometry. •OH radicals were the major oxidant species for the degradation of valsartan using TiO2, while positive holes (h+), followed by a much lesser amount of •OH radicals, were the major species in the case of g-C3N4. Valsartan degradation followed first order kinetics by both catalysts with TiO2 being the catalyst with the better photocatalytic efficiency. The transformation products (TPs) and their evolution profiles are identified and monitored, respectively, by means of LC-HRMS. Based on TPs identification, the degradation mechanisms are discussed. The major degradation pathways for g-C3N4 include decarboxylation and subsequent oxidation, hydroxylation, and cleavage of C–N bond, while for TiO2 cyclization, TPs are abundant and the hydroxylation occurs in the first stage products. The study highlights the complex nature of TPs formed during such processes, the different mechanisms involved and the necessity for the identification of TPs for the assessment of the treatment and the tracking of such TPs in different environmental compartments.

Emerging Pollutants in Moroccan Wastewater: Occurrence, Impact, and Removal Technologies

The rapid growth of anthropogenic activities in recent decades has resulted in the appearance of numerous new chemical compounds in the environment, known as “emerging pollutants” (EPs) or “contaminants of emerging concern” (CECs). Although partially or not yet regulated or monitored, there is growing research interest in these EPs among the scientific community because of their bioaccumulation, persistence, and adverse effects. Among these, endocrine disruptors, pesticides, and pharmaceuticals can have harmful impacts on human health and the ecosystem. Conventional wastewater treatment technologies are not effective in removing these contaminants, allowing them to be released into the receiving environment. In order to improve the understanding of emerging pollutants, this review discusses the source, occurrence, and impacts of bisphenol A, atrazine, amoxicillin, and paracetamol as model molecules of emerging environmental pollutants, an issue that remains underrepresented in Morocco. Then, treatment methods for EPs are reviewed, including adsorption, advanced oxidation processes, biodegradation, and hybrid treatment. It is proposed that adsorption and photocatalysis can be used as simple, effective, and environmentally friendly technologies for their removal. Thus, we summarize some of the adsorbent and photocatalyst materials applied in recent work to control these pollutants. Towards the end of this paper, the development of inexpensive and locally available (Morocco) materials to remove these compounds from wastewater is considered.

Recent progress of silver-containing photocatalysts for water disinfection under visible light irradiation: A review

Photocatalysis has emerged as an environmentally friendly approach for microbial disinfection. The development of visible-light-driven (VLD) photocatalysts for water pollution remediation is imperative, considering that visible light constitutes a substantial fraction of the solar spectrum. The modification of photocatalysts by Ag/AgX (X = Cl, Br, I) deposition can be used to improve photocatalytic efficiencies. This is achieved by preventing photogenerated electron-hole pairs recombination through electron trapping mechanisms. With the introduction of silver NPs, visible light absorption can also be increased through its SPR enhancement. Silver also possesses excellent antimicrobial properties. Consequently, a novel class of Ag/AgX-containing hybrid materials has recently emerged as a promising candidate for water disinfection. This review summarizes the latest advances in the synthesis of Ag/AgX-containing photocatalysts using various synthetic methods. The microbial disinfection efficiencies of the as-prepared materials, the main reactive oxygen species and disinfection mechanisms are also reviewed in detail. Finally, some areas that need to be improved are discussed along with new insights as perspectives for future developments in this field.

Two-Dimensional Nanomaterials for the Removal of Pharmaceuticals from Wastewater: A Critical Review

The removal of pharmaceuticals from wastewater is critical due to their considerable risk on ecosystems and human health. Additionally, they are resistant to conventional chemical and biological remediation methods. Two-dimensional nanomaterials are a promising approach to face this challenge due to their combination of high surface areas, high electrical conductivities, and partially optical transparency. This review discusses the state-of-the-art concerning their use as adsorbents, oxidation catalysts or photocatalysts, and electrochemical catalysts for water treatment purposes. The bibliographic search bases upon academic databases including articles published until August 2021. Regarding adsorption, high removal capacities (>200 mg g−1) and short equilibrium times (<30 min) are reported for molybdenum disulfide, metal-organic frameworks, MXenes, and graphene oxide/magnetite nanocomposites, attributed to a strong adsorbate-adsorbent chemical interaction. Concerning photocatalysis, MXenes and carbon nitride heterostructures show enhanced charge carriers separation, favoring the generation of reactive oxygen species to degrade most pharmaceuticals. Peroxymonosulfate activation via pure or photo-assisted catalytic oxidation is promising to completely degrade many compounds in less than 30 min. Future work should be focused on the exploration of greener synthesis methods, regeneration, and recycling at the end-of-life of two-dimensional materials towards their successful large-scale production and application.

Photochemical transformation of fentanyl under the simulated solar radiation - Enhancement of the process by heterogeneous photocatalysis and in silico analysis of toxicity

In this study the photochemical transformation of fentanyl-a very potent opioid drug-under simulated solar radiation was investigated for the first time. This pharmaceutical is frequently detected in various environment samples at concentrations that should be regarded as potentially harmful. Nevertheless, to date, no drug phototransformation products (TPs) have been reported. Considering fentanyl's exceptionally high toxicity, knowledge of the properties of these potential TPs is essential in order to properly assess its pollution impact. In this study, all photolytic experiments were performed using a xenon lamp (D65 filter) and RP-UHPLC coupled with the ESI-high-resolution tandem mass spectrometry. The phototransformation of fentanyl in natural river water and the application of heterogeneous photocatalysis as a possible way of decontaminating water were also investigated. Fentanyl turned out to be photostable, but twenty-six previously unreported TPs (formed mainly as a consequence of hydroxylation and oxidation) were found and characterized. The applied catalysts-TiO₂ and ZnO-showed very high effectiveness, and the presence of the natural water matrix further increased the photodecomposition rate (up to 600 times) relative to direct photolysis. Importantly, the almost complete degradation of the parent compound as well as its TPs after 16 min of irradiation indicated that heterogeneous photocatalysis can be considered an efficient way of treatment of fentanyl-contaminated water. The computational analysis of toxicity showed that fentanyl may be more harmful to rodents and aquatic species than its TPs. However, some of these products are probably more mutagenic and developmentally toxic. Additionally, one product in particular may be a strong estrogenic compound, proving the importance of assessing TPs' toxic properties. The evaluation of bioaccumulation, bioconcentration and biodegradability revealed that fentanyl possesses unfavorable properties compared to TPs.

UV-induction of photolytic and photocatalytic degradation of fumonisins in water: reaction kinetics and toxicity

Although fumonisins are toxic and carcinogenic mold products that contaminate feed, food, and water, their photodegradation has not yet been reported. In this work, the efficiency of photolysis (UV, UV/H₂O₂, and UV/[Formula: see text]) and photocatalysis (TiO₂ (Degussa P25/Wackherr) and ZnO) for the degradation of fumonisins in an aqueous medium were investigated. In the case of fumonisin B₁ (FB₁) optimal conditions in terms of pH, the initial concentrations of H₂O₂/[Formula: see text] for UV, UV/H₂O₂, and UV/[Formula: see text] treatments were investigated. The photocatalytic degradation using TiO₂ Wackherr as catalyst at natural pH (about 8) proved to be the most efficient treatment for removal of FB₁ and FB₃. Namely, during the first 30 min of irradiation, 99% of FB₁ (1.39 μM) was degraded, while FB₃ (0.425 μM) was completely removed during the first 20 min of irradiation. In the case of FB₂ (0.687 μM), UV/[Formula: see text] was the most efficient treatment, and complete removal occurred in the first 90 min of irradiation. All applied treatments for fumonisins removal have followed pseudo-first-order kinetics under the relevant experimental conditions. Toxicity of fumonisins and their mixtures formed during photodegradation were investigated using mammalian cell lines (BHK, H-4-II-E, Neuro-2a, and MRC-5). The BHK cell line was the most sensitive to fumonisins, especially FB₂ and FB₃, and its photodegradation mixtures.

Antibiotics in Aquaculture Wastewater: Is It Feasible to Use a Photodegradation-Based Treatment for Their Removal?

Aquacultures are a sector facing a huge development: farmers usually applying antibiotics to treat and/or prevent diseases. Consequently, effluents from aquaculture represent a source of antibiotics for receiving waters, where they pose a potential threat due to antimicrobial resistance (AMR) induction. This has recently become a major concern and it is expectable that regulations on antibiotics’ discharge will be established in the near future. Therefore, it is urgent to develop treatments for their removal from wastewater. Among the different possibilities, photodegradation under solar radiation may be a sustainable option. Thus, this review aims at providing a survey on photolysis and photocatalysis in view of their application for the degradation of antibiotics from aquaculture wastewater. Experimental facts, factors affecting antibiotics’ removal and employed photocatalysts were hereby addressed. Moreover, gaps in this research area, as well as future challenges, were identified.

Recent progress in green and biopolymer based photocatalysts for the abatement of aquatic pollutants

Enormous research studies on the abatement of anthropogenic aquatic pollutants including organic dyes, pesticides, cosmetics, antibiotics and inorganic species by using varieties of semiconductor photocatalysts have been reported in recent decades. Besides, many of these photocatalysts suffer in real applications owing to their high production cost and low stability. In many cases, the photocatalysts themselves are being considered as secondary pollutants. To eliminate these drawbacks, the green synthesized photocatalysts and the use of biopolymers as photocatalyst supports are considered in recent years. In this context, recent developments in green synthesized metals, metal oxides, other metal compounds, and carbon based photocatalysts in water purification are critically reviewed. Furthermore, the pivotal role of biopolymers including chitin, chitosan, cellulose, natural gum, hydroxyapatite, alginate in photocatalytic removal of aquatic pollutants is comprehensively reviewed. The presence of functional groups, electron trapping ability, biocompatibility, natural occurrence, and low production cost are the major reasons for using biopolymers in photocatalysis. Finally, the summary and conclusion are presented along with existing challenges in this research area.

Toward Scaling-Up Photocatalytic Process for Multiphase Environmental Applications

Recently, we have witnessed a booming development of composites and multi-dopant metal oxides to be employed as novel photocatalysts. Yet the practical application of photocatalysis for environmental purposes is still elusive. Concerns about the unknown fate and toxicity of nanoparticles, unsatisfactory performance in real conditions, mass transfer limitations and durability issues have so far discouraged investments in full-scale applications of photocatalysis. Herein, we provide a critical overview of the main challenges that are limiting large-scale application of photocatalysis in air and water/wastewater purification. We then discuss the main approaches reported in the literature to tackle these shortcomings, such as the design of photocatalytic reactors that retain the photocatalyst, the study of degradation of micropollutants in different water matrices, and the development of gas-phase reactors with optimized contact time and irradiation. Furthermore, we provide a critical analysis of research–practice gaps such as treatment of real water and air samples, degradation of pollutants with actual environmental concentrations, photocatalyst deactivation, and cost and environmental life-cycle assessment.