Deciphering effects of humic acid in landfill leachate on the simultaneous nitrification, anammox and denitrification (SNAD) system from performance, electron transfer and microbial community

Response of anammox to organics with different degradation characteristics and exposure time: Performance, sludge characteristics and bacterial community

The effects of typical organic compounds including easily degradable organic matters sodium acetate, yeast and methanol, and refractory organic matter (ROM) humic acid on anaerobic ammonium oxidation (anammox) systems in short-term and medium-term exposure time were studied. During short-term experiments, nitrogen removal activity (NRA) was inhibited at sodium acetate level of 150 mg L-1 total organic carbon (TOC) and methanol level of 30-150 mg L-1 TOC, but humic acid and yeast (≤150 mg L-1 TOC) enhanced nitrogen removal in anammox systems. The greatest NRA of 30.10 mg TN g-1 VSS h-1 was recorded at yeast level of 90 mg L-1 TOC. In medium-term experiments, organics significantly inhibited the nitrogen removal ability. As a ROM, humic acid enhanced sludge aggregation and biological diversity, but decreased the bioactivity and extracellular polymeric substances levels. Due to the endogenous denitrification, the relative abundance of anammox bacteria (AnAOB) was decreased. Candidatus Kuenenia is still dominant in sludge with methanol and humid acid, but AnAOB are not dominant due to the addition of sodium acetate and yeast. This research would be beneficial for the full-scale application of the anammox process in treating real wastewater with organics and ammonia.

3D printing for constructing biocarriers using sodium alginate/ε-poly-l-lysine ink: Enhancing microbial enrichment for efficient nitrogen removal in wastewater

The microbial enrichment of traditional biocarriers is limited due to the inadequate consideration of spatial structure and surface charging characteristics. Here, capitalizing on the ability of 3D printing technology to fabricate high-resolution materials, we further designed a positively charged sodium alginate/ε-poly-l-lysine (SA/ε-PL) printing ink, and the 3D printed biocarriers with ideal pore structure and rich positive charge were constructed to enhance the microbial enrichment. The rheological and mechanical tests confirmed that the developed SA/ε-PL ink could simultaneously satisfy the smooth extrusion for printing process and the maintenance of 3D structure. The utilization of the ε-PL secondary cross-linking strategy reinforced the 3D mechanical structure and imparted the requisite physical properties for its application as a biocarrier. Compared with traditional sponge carriers, 3D printed biocarrier had a faster initial attachment rate and a higher biomass of 14.58 ± 1.18 VS/cm3, and the nitrogen removal efficiency increased by 53.9 %. Besides, due to the superior electrochemical properties and biocompatibility, the 3D printed biocarriers effectively enriched the electroactive denitrifying bacteria genus Trichococcus, thus supporting its excellent denitrification performance. This study provided novel insights into the development of new functional biocarriers in the wastewater treatment, thereby providing scientific guidance for practical engineering.

Effect of humic acid on aerobic denitrification by Achromobacter sp. strain GAD-3

Humic acid (HA), a common natural organic matter, could affect conventional anoxic denitrification. Aim of this study was to investigate effect of HA on the process of aerobic denitrification in Achromobacter sp. GAD-3, an aerobic denitrifying strain. The findings demonstrated that an increase in HA concentrations (≥5 mg L-1) promoted the aerobic denitrification process (excluding N2O reduction), manifesting as higher rates of nitrate removal (6.67-11.1 mg L-1 h-1) and lower levels of nitrite accumulation (30.2-20.7 mg L-1). This was attributed to the increased electron transfer activities and denitrifying reductase activities (including NAR, NIR and NOR) facilitated by HA. Accordingly, the expression of denitrification genes such as napA, cnorB, and nirS was enhanced by HA. Nonetheless, the nosZ gene and N2OR activity underwent suppression by HA, which was accountable for N2O emission. It is crucial to understand the HA mechanism towards aerobic denitrifiers for wastewater treatment plants to enhance nitrogen removal.

3D-printed controllable bio-accelerators with sustained release property to boost chromium (VI) inhibited denitrification recovery

Although soluble bio-accelerators have proven effective in mitigating Cr(VI) inhibition within denitrification system, issues persist in immobilizing bio-accelerators and making them slow-release for sustained regulation. In this study, a novel strategy was proposed to fabricate immobilized bio-accelerators with controlled structure, sustained release property by 3D printing technology. Notably, the sustained release of bio-accelerators from 3D-printed bio-accelerators (3DP-B) lasted for at least 144 h. Compared to control group, 3DP-B with basic components (3DP-BB) shortened the recovery time by 1.4 folds, and the COD and NO3--N removal efficiency was 36.5 % and 38.0 % higher than that of natural recovery. Correspondingly, the activity of key enzymes (nitrate reductase, nitrite reductase, nitric oxide reductase, and nitrous oxide reductase), electron transfer system activity and extracellular polymer substances of denitrification biofilm maintained at relatively high levels. Furthermore, introducing 60 mg·L-1 anthraquinone-2,6-disulfonate (AQDS) into the ink showed noticeable superiority on the bio-inhibition release over 1000 mg·L-1 AQDS. The released AQDS facilitated the electron transport capacity by 1.25 times compared with control group. The groundbreaking findings of this study could advance the development of 3D printing technology and utilization of bio-accelerators in the field of wastewater treatment.

The corncobs-loaded iron nanoparticles enhanced mechanism of denitrification performance in microalgal-bacterial aggregates system when treating low COD/TN wastewater

To improve denitrification efficiency of microalgal-bacterial aggregates (MABAs) when treating low carbon to nitrogen (C/N) ratio wastewater, CK (the biological control), C1 (untreated corncobs), C2 (alkali-treated corncobs), CFe1 (C1 loaded iron nanoparticles) and CFe2 (C2 loaded iron nanoparticles) five groups of experiments were installed under artificial light (1600 lm). After 36 h of experiment, NO3--N was almost completely converted in CFe1 following by CFe2 when the initial concentration was 60.1 mg/L, whose NO3--N conversion rates were 6.2 and 3.4 times faster than the CK group, respectively. The result showed that the corncobs-loaded iron nanoparticles (CFe1, CFe2) had the potential to promote denitrification process and the CFe1 was more effective. Meanwhile, the CFe1 and CFe2 resulted in a decreased content in extracellular polymeric substances (EPS) secretion because iron nanoparticles (Fes) promoted electron transport and alleviated the nitrate stress. Moreover, the electrochemical analysis of EPS showed that the corncobs and corncobs-loaded iron nanoparticles improved the electron transport rate and redox active substances production. The increase in electron transport activity (ETSA), adenosine triphosphate (ATP) and nicotinamide adenine dinucleotide (NADH) also indicated that the CFe1 and CFe2 promoted microbial metabolic activity and the electron transport rate in MABAs. In addition, the CFe1 group enhanced the enrichment of Proteobacteria, Patescibacteria, Chlorophyta and Ignavibacteriae, which was contributed to the nitrogen removal performance of MABAs. In summary, the enhancement mechanism of corncobs-loaded iron nanoparticles on denitrification process of MABAs was depicted through EPS secretion, electrochemical characteristics, microbial metabolic activity and microbial community. The article provides a viable program for enhancing the denitrification performance of MABAs when treating low C/N wastewater.

Deciphering the anammox microbial community succession with humic acid exposure to optimize large anammox granules for robust nitrogen removal

The robustness of the anaerobic ammonia oxidation (anammox) process in treating wastewater with high concentrations of humic acids (HAs), including landfill leachate and sludge anaerobic digestion liquid, has been paid great attention. This study revealed that the anammox sludge granule size of 1.0-2.0 mm could be robust under the HA exposure with high concentrations. The total nitrogen removal efficiency (NRE) was 96.2% at the HA concentration of 20-100 mg/L, while the NRE was 88.5% at the HA concentration of 500 mg/L, with reduced by 7.7%. The increased extracellular polymeric substances (EPS) content which was stimulated by the HA exposure favored the formation of large granules (1.0-2.0 mm) by enveloping medium and micro granules (0.2-1.0 mm). The abundance of anammox bacteria Candidatus Brocadia was found to be higher (14.2%) in large anammox granules sized 1.0-2.0 mm, suggesting a potentially high anammox activity. However, the abundance of denitrifiers Denitratisoma increased by 4.3% in ultra-large anammox granules sized >2.0 mm, which could be attributed to the high EPS content for heterotrophic denitrifiers metabolism as organic matter. The feedback mechanism of the anammox community for maintaining the ecological function under the HA exposure resulted in a closely related microbial community, with positive and negative correlations in the ecological network increased by 64.3%. This study revealed that the HA exposure of the anammox system resulted in the anammox granules of 1.0-2.0 mm size being the dominant granules with robust nitrogen removal, providing significant guidance for the optimization of anammox granules for an efficient treatment of HA-containing wastewater in anammox applications.

External redox couple enhanced anammox sludge activity at low temperature: Insight into intracellular resource synthesis

Anaerobic ammonium oxidation (anammox), an energy-efficient deamination biotechnology, faces operational challenges in low-temperature environments. Enhancing the metabolic activity of anammox bacteria (AnAOB) is pivotal for advancing its application in mainstream municipal wastewater treatment. Inspired by the metabolic adaptability of AnAOB and based on our previous findings, this work investigated the enhancement of intracellular ATP and NADH synthesis through the exogenous supply of reduced humic acid (HAred) and H2O2 redox couple, aiming to augment AnAOB activity under low-temperature conditions. Our experimental setup involved continuous dosing of 0.0067 μmol g-1 volatile suspended solid of H2O2 and 10 mg g-1 volatile suspended solid of HAred into a mainstream anammox reactor operated at 15 °C with an influent TN content of 60 mg/L. The results showed that HAred / H2O2 couple succeeded in maintaining the effluent TN at 10.72 ± 0.91 mg l-1. The specific anammox activity, ATP and NADH synthesis levels of sludge increased by 1.34, 2.33 and 6.50 folds, respectively, over the control setup devoid of the redox couple. High-throughput sequencing analysis revealed that the relative abundance of Candidatus Kuenenia after adding HAred / H2O2 couple reached 3.65 % at the end of operation, which was 5.14 folds higher than that of the control group. Further metabolomics analysis underscored an activation in the metabolism of amino acids, nucleotides, and phospholipids, which collectively enhanced the availability of ATP and NADH for the respiratory processes. These findings may provide guidance on strategy development for improving the electron transfer efficiency of AnAOB and underscore the potential of using redox couples to promote the mainstream application of anammox technology.

Elucidating distinct roles of chemical reduction and autotrophic denitrification driven by three iron-based materials in nitrate removal from low carbon-to-nitrogen ratio wastewater

Effective nitrate removal is a key challenge when treating low carbon-to-nitrogen ratio wastewater. How to select an effective inorganic electron donor to improve the autotrophic denitrification of nitrate nitrogen has become an area of intense research. In this study, the nitrate removal mechanism of three iron-based materials in the presence and absence of microorganisms was investigated with Fe2+/Fe0 as an electron donor and nitrate as an electron acceptor, and the relationship between the iron materials and denitrifying microorganisms was explored. The results indicated that the nitrogen removal efficiency of each iron-based material coupled sludge systems was higher than that of iron-based material. Furthermore, compared with the sponge iron coupled sludge system (60.6%-70.4%) and magnetite coupled sludge (56.1%-65.3%), the pyrite coupled sludge system had the highest removal efficiency of TN, and the removal efficiency increased from 62.5% to 82.1% with time. The test results of scanning electron microscope, X-ray photoelectron spectroscopy and X-ray diffraction indicated that iron-based materials promoted the attachment of microorganisms and the chemical reduction of nitrate in three iron-based material coupled sludge systems. Furthermore, the pyrite coupled sludge system had the highest nitrite reductase activity and can induce microorganisms to secrete more extracellular polymer substances. Combined with high-throughput sequencing and PICRUSt2 functional predictive analysis software, the total relative abundance of the dominant bacterial in pyrite coupled sludge system was the highest (72.06%) compared with the other iron-based material systems, and the abundance of Blastocatellaceae was relatively high. Overall, these results suggest that the pyrite coupled sludge system was more conducive to long-term stable nitrate removal.

Simultaneous removal of calcium, phosphorus, and bisphenol A from industrial wastewater by Stutzerimonas sp. ZW5 via microbially induced calcium precipitation (MICP): Kinetics, mechanism, and stress response

The biological treatment of complex industrial wastewater has always been a research hotspot. In this experiment, a salt-tolerant strain Stutzerimonas sp. ZW5 with aerobic denitrification and biomineralization ability was screened, and the optimum conditions of ZW5 were explored by kinetics. The removal efficiencies of nitrate (NO3--N), bisphenol A (BPA), phosphorus (PO43--P), and calcium (Ca2+) were 94.47 %, 100 %, 98.87 %, and 83.04 %, respectively. The removal mechanism of BPA was the adsorption of microbial induced calcium precipitation (MICP) and extracellular polymeric substances (EPS). Moreover, BPA could weaken the electron transfer ability and growth metabolism of microorganisms and affect the structure of biominerals. At the same time, the stress response of microorganisms would increase the secretion of EPS to promote the process of biomineralization. Through nitrogen balance experiments, it was found that the addition of BPA would lead to a decrease in the proportion of gaseous nitrogen. This experiment offers novel perspectives on the treatment of industrial effluents and microbial stress response.

Multi-omics analysis of nitrifying sludge under carbon disulfide stress: Nitrification performance and molecular mechanisms

Carbon disulfide (CS2) is a widely used enzyme inhibitor with cytotoxic properties, commonly employed in viscose fibers and cellophane production due to its non-polar characteristics. In industry, CS2 is often removed by aeration, however, residual CS2 may enter the wastewater treatment plants, impacting the performance of nitrifying sludge. Currently, there is a notable dearth of research on the response of nitrifying sludge to CS2-induced stress. This study delves into the alterations in the performance of nitrifying sludge under short-term and long-term CS2 stress, scrutinizes the toxic effects of CS2 on microbial cells, elucidates the succession of microbial community structure, and delineates changes in microbial metabolic products. The findings from short-term CS2 stress revealed that low concentrations of CS2 induced oxidative stress damage, which was subsequently repaired in cells. However, at concentrations of 100-200 mg/L, CS2 inhibited reactive oxygen species, superoxide dismutase, and catalase, which are associated with metabolic and antioxidant activities. The inhibition of nitrite oxidoreductase activity by high concentrations of CS2 was attributed to its impact on the enzyme's conformation. Prolonged CS2 stress resulted in an increase in the secretion of soluble extracellular polymeric substances in sludge, while CS2 was assimilated into sulfate. The analysis of sludge microbial community structure revealed a decline in the relative abundance of Rhodanobacter, which is associated with nitrification, and an increase in Sinomonas, involved in sulfur oxidation. Metabolite analysis results demonstrated that high concentrations of CS2 affect pantothenate and CoA biosynthesis, purine metabolism, and glutathione metabolism. This study elucidated the microbial response mechanism of nitrifying sludge under short-term and long-term CS2 stress. It also clarified the composition and function of microbial ecosystems, and identified key bacterial species and metabolites. It provides a basis for future research to reduce CS2 inhibition through approaches such as the addition of metal ions, the selection of efficient CS2-degrading strains, and the modification of strain metabolic pathways.

Effect of sludge humic acid-derived nano-biochars on anaerobic degradation of sulfamethoxazole by Shewanella oneidensis MR-1

Some nano-biochars (nano-BCs) as electron mediators could enter into cells to directly promote intracellular electron transfer and cell activities. However, little information was available on the effect of nano-BCs on SMX degradation. In this study, nano-BCs were prepared using sludge-derived humic acid (SHA) and their effects on SMX degradation by Shewanella oneidensis MR-1 were investigated. Results showed that nano-BCs (Carbon dots, CDs, <10 nm) synthesized using SHA performed a better accelerating effect than that of the nano-BCs with a larger size (10-100 nm), which could be attributed to the better electron transfer abilities of CDs. The degradation rate of 10 mg/L SMX in the presence of 100 mg/L CDs was significantly increased by 84.6% compared to that without CDs. Further analysis showed that CDs could not only be combined with extracellular Fe(III) to accelerate its reduction, but also participate in the reduction of 4-aminobenzenesulphonic acid as an intermediate metabolite of SMX via coupling with extracellular Fe(III) reduction. Meanwhile, CDs could enter cells to directly participate in intracellular electron transfer, resulting in 32.2% and 25.2% increases of electron transfer system activity and ATP level, respectively. Moreover, the activities of SMX-degrading enzymes located in periplasm and cytoplasm were increased by around 2.2-fold in the presence of CDs. These results provide an insight into the accelerating effect of nano-BCs with the size of <10 nm on SMX degradation and an approach for SHA utilization.

Bio-promoter mediated denitrification recovery from Cd(II) stress: Microbial activity resilience, electron behavior enhancement and microbial community evolution

Denitrification is fragile to toxic substances, while currently there are few regulation strategies for toxic substance-stressed denitrification. This study proposed a combined bio-promoter composed of basic bio-promoter (cytokinin, biotin, L-cysteine, and flavin adenine dinucleotide) and phosphomolybdic acid (PMo12) to recover cadmium(II) (Cd(II)) stressed denitrification. By inhibiting 58.02% and 48.84% of nitrate reductase and nitrite reductase activities, Cd(II) caused all the influent nitrogen to accumulate as NO3--N and NO2--N. Combined bio-promoter shortened the recovery time by 21 cycles and improved nitrogen removal efficiency by 10% as the synergistic effect of basic bio-promoter and PMo12. Basic bio-promoter enhanced antioxidant enzyme activities for reactive oxygen species clearance and recovered 23.30% of nicotinamide adenine dinucleotide for sufficient electron donors. Meanwhile, PMo12 recovered electron carriers contents, increasing the electron transfer activity by 60.81% compared with self-recovery. Bio-promoters enhanced the abundance of denitrifiers Seminibacterium and Dechloromonas, which was positively correlated with rapid recovery of denitrification performance.

Enhancing anammox process with granular activated carbon: A study on Microbial Extracellular Secretions (MESs)

Granular activated carbon (GAC), a porous carbon-based material, provides increased attachment space for functional microorganisms and enhances nitrogen removal by facilitating extracellular electron transfer in the anammox process. This study investigates the effects of GAC on the biosynthesis of microbial extracellular secretions (MESs) and explores the roles of these secretions in anammox activities. Four lab-scale reactors were operated: two downstream UASB reactors (D1 and D2) receiving effluents from the upstream UASB reactors (U1: no-GAC, U2: yes-GAC). Our results indicate that MESs were enhanced with the addition of GAC. The effluent from U2 exhibited a 59.62 % higher amino acid content than that from U1. These secretions contributed to an increase in the nitrogen loading rate (NLR) in the downstream reactors. Specifically, NLR in D1 increased from 130.5 to 142.7 g N/m3/day, and in D2, it escalated from 137.5 to 202.8 g N/m3/day, likely through acting as cross-feeding substrates or vital nutrients. D2 also showed increased anammox bacterial activity, enriched Ca. Brocadia population and hao gene abundance. Furthermore, this study revealed that D2 sludge has significantly higher extracellular polymeric substances (EPS) (48.71 mg/g VSS) and a larger average granule size (1.201 ± 0.119 mm) compared to D1 sludge. Overall, GAC-stimulated MESs may have contributed to the enhanced performance of the anammox process.

Iron-mediated DAMO-anammox process: Revealing the mechanism of electron transfer

The nitrate denitrifying anaerobic methane oxidation-anaerobic ammonia oxidation (DAMO-anammox) can accomplish nitrogen removal and methane (CH4) reduction. This process greatly contributes to carbon emission mitigation and carbon neutrality. In this study, we investigated the electron transfer process of functional microorganisms in the iron-mediated DAMO-anammox system. Fe3+ could be bound to several functional groups (-CH3, COO-, -CH) in extracellular polymeric substance (EPS), and the functional groups bound were different at different iron concentration. Fe3+ underwent reduction reactions to produce Fe2+. Most Fe3+ and Fe2+ react with microorganisms and formed chelates with EPS. Three-dimensional fluorescence spectra showed that Fe3+ affected the secretion of tyrosine and tryptophan, which were essential for cytochrome synthesis. The presence of Fe3+ accelerated c-type cytochrome-mediated extracellular electron transfer (EET), and when more Fe3+ existed, the more cytochrome C expressed. DAMO archaea (M. nitroreducens) in the system exhibited a high positive correlation with the functional genes (resa and ccda) for cytochrome c synthesis. Some denitrifying microorganisms showed positive correlations with the abundance of riboflavin. This finding showed that riboflavin secreted by functional microorganisms acted as an electron shuttle. In addition, DAMO archaea were positively correlated with the hair synthesis gene pily1, which indicated that direct interspecies electron transfer (DIET) may exist in the iron-mediated DAMO-anammox system.

Immobilized bioreactor for enhanced ammonia, phosphorus, and phenol removal and effects of phenol on microbial communities, potential functions, and nitrogen metabolism

In the present study, an immobilized bioreactor was established to remove ammonia (NH4+-N), phosphate (PO43--P), and phenol using composite mycelium spheres (CMP) as the immobilization material in combination with Pseudomonas sp. Y1. Under optimal operating conditions, the bioreactor achieved 98.07, 91.71, and 92.57 % removal of NH4+-N, PO43--P, and phenol, respectively. The results showed that the bioreactor removed PO43--P by biomineralization and co-precipitation. Phenol removal relied on a Fenton-like reaction achieved by CMP-induced quinone redox cycling. High-throughput sequencing analysis and functional gene prediction indicated that Pseudomonas was the dominant genus and that the bioreactor had much potential for nitrogen removal, respectively. In addition, phenol affected the performance of functional genes and the associated enzymes, which influenced the nitrogen metabolism process in the bioreactor. This work serves as a guideline for the development of more stable and sustainable composite pollution removal technologies and fungal-bacterial symbiotic systems.

Microbial activity along the depth of biofilm in the simultaneous partial nitrification, anammox and denitrification (SNAD) system

Simultaneous partial nitrification, anammox and denitrification (SNAD) is a sustainable and cost-effective technology for nitrogen removal from low-strength wastewater. However, knowledge of the biofilm microenvironment of the SNAD system is currently unsatisfactory. The purpose of this study was to evaluate organic carbon effects on the microenvironment and microbial growth in the SNAD biofilm system. Microelectrodes were used to investigate microbial activity in-depth within biofilms. ORP distribution of the SNAD system was positively related to anammox activity(R2 = 0.9), and had some influence on microbial community structure. The synergistic effect of anammox bacteria and denitrifiers could be achieved when the abundance ratio of anammox bacteria to denitrifying bacteria is greater than 1.2.

Microbial induced calcium precipitation by Zobellella denitrificans sp. LX16 to simultaneously remove ammonia nitrogen, calcium, and chemical oxygen demand in reverse osmosis concentrates

In recent years, with the rapid development of industrial revolution and urbanization, the generation and treatment of a large number of salt-containing industrial wastewater has attracted wide attention. A novel salt-tolerant Zobellella denitrificans sp. LX16 with excellent nitrogen removal and biomineralization capabilities was isolated in this experiment. Kinetic experiments were conducted to determine the optimal condition. Under this condition, chemical oxygen demand (COD) can be entirely removed together with ammonia nitrogen, and the removal efficiency of calcium was 88.09%. Growth curves and nitrogen balance tests showed that strain LX16 not only had good HNAD and MICP capabilities, but also had high nitrite reductase and nitrate reductase activities during this process. Three-dimensional fluorescence results reflected that when external carbon sources were lacking or salinity was high, humic acid could effectively enhance the metabolic activity of heterotrophic nitrifying aerobic denitrifying microorganisms through extracellular electron transfer, and the substances produced in the metabolic process could promote biommineralization. Moreover, combined with SEM, SEM-EDS, XRD and FTIR analysis, it is concluded that the microbial surface can provide nucleation sites to form calcium salts, and with the increase of alkalinity to generate Ca5(PO4)3OH. The theoretical basis for the use of biological treatment in reverse osmosis wastewater have been proved by this experiment.

Effect of ibuprofen (IBU) on the sulfur-based and calcined pyrite-based autotrophic denitrification (SCPAD) systems with two filling modes: Performance and toxic response mechanism

To investigate the effect of ibuprofen (IBU) on the sulfur-based and calcined pyrite-based autotrophic denitrification (SCPAD) systems, two individual reactors with the layered filling (L-SCPAD) and mixed filling (M-SCPAD) systems were established via sulfur and calcined pyrite. Effluent NO3--N concentration of the L-SCPAD and M-SCPAD systems was first increased to 6.44, 0.93 mg/L under 0.5 mg/L IBU exposure and gradually decreased to 1.66 mg/L, 0 mg/L under 4.0 mg/L IBU exposure, indicating that NO3--N removal performance of the M-SCPAD system was better than that of the L-SCPAD system. The variation of extracellular polymeric substances (EPS) characteristics demonstrated that more EPS was secreted in the M-SCPAD system compared to the L-SCPAD system, which contributed to forming a more stable biofilm structure and protecting microorganisms against the toxicity of IBU in the M-SCPAD system. Moreover, the increased electron transfer impedance and decreased cytochrome c implied that IBU inhibited the electron transfer efficiency of the L-SCPAD and M-SCPAD systems. The decreased adenosine triphosphate (ATP) and electron transfer system activity (ETSA) content showed that IBU inhibited metabolic activity, but the M-SCPAD system exhibited higher metabolic activity compared to the L-SCPAD system. In addition, the analysis of the bacterial community indicated a more stable abundance of nitrogen removal function bacteria (Bacillus) in the M-SCPAD system compared to the L-SCPAD system, which was conducive to maintaining a stable denitrification performance. The toxic response mechanism based on the biogeobattery effect was proposed in the SCPAD systems under IBU exposure. This study provided an important reference for the long-term toxic effect of IBU on the SCPAD systems.

Enhanced ammonia nitrogen and phenol removal by immobilized bacteria through composite mycelium pellet-driven quinone redox cycle

The composite mycelium pellet (CMP) was coupled with Pseudomonas sp. Y1 (CMP-Y1) to remove phenol and ammonia nitrogen (NH4+-N). The CMP was formed by the self-assembly of fungal mycelium with sponge iron (SIO), gallic acid (GA), and oxalic acid. The results showed that CMP with abundant pore size and successful internal loading of sponge iron containing iron nanoparticles. CMP could induce GA redox cycle to form Fenton-like reaction and thus achieve efficient phenol removal (93.32%, 24 h). Meanwhile, the removal efficiencies of phenol, NH4+-N, and chemical oxygen demand (COD) using CMP-Y1 at 12 h were 93.71, 92.40, and 89.00%, respectively. The increase in the electron transfer activity of strain Y1 by the addition of CMP could facilitate the nitrogen removal processes. In addition, high-throughput sequencing results indicated the abundance of antioxidant and repair genes was increased, which might be a strategy of strain Y1 to cope with oxidative stress. This strategy provided the possibility for the practical application of the combination of advanced oxidation and biological treatment, and offered new insights into the symbiotic system of fungi and bacteria.

Microbial community and gene dynamics response to high concentrations of gadolinium and sulfamethoxazole in biological nitrogen removal system

The impact of high antibiotic and heavy metal pollution levels on biological nitrogen removal in wastewater treatment plants (WWTPs) remains poorly understood, posing a global concern regarding the issue spread of antibiotic resistance induced by these contaminants. Herein, we investigated the effects of gadolinium (Gd) and sulfamethoxazole (SMX), commonly found in medical wastewater, on biological nitrogen removal systems and microbial characteristics, and the fate of antibiotic resistance genes (ARGs), metal resistance genes (MRGs), and mobile genetic elements (MGEs). Our findings indicated that high SMX and Gd(III) concentrations adversely affected nitrification and denitrification, with Gd(III) exerting a strong inhibitory effect on microbial activity. Metagenomic analysis revealed that high SMX and Gd(III) concentrations could reduce microbial diversity, with Thauera and Pseudomonas emerging as dominant genera across all samples. While the relative abundance of most ARGs decreased under single Gd(III) stress, MRGs increased, and nitrification functional genes were inhibited. Conversely, combined SMX and Gd(III) pollution increased the relative abundance of intl1. Correlation analysis revealed that most genera could host ARGs and MRGs, indicating co-selection and competition between these resistance genes. However, most denitrifying functional genes exhibited a positive correlation with MRGs. Overall, our study provides novel insights into the impact of high concentrations of antibiotics and heavy metal pollution in WWTPs, and laying the groundwork for the spread and proliferation of resistance genes under combined SMX and Gd pollution.

Mechanistic insights into the response of electroactive biofilms to Cd2+ shock: bacterial viability and electron transfer behavior at the cellular and community levels

Electroactive biofilms (EABs) play a crucial role in environmental bioremediation due to their excellent extracellular electron transfer (EET) capabilities. However, Cd2+ can have toxic effects on the electrochemical performance of EABs, and the comprehensive inhibition mechanism of EABs in response to Cd2+ shock remains elusive. This study indicated that Cd2+ shock significantly reduced biomass and increased oxidative stress in EABs at the cellular level. The bacterial viability of EABs in phase III under 0.5 mM Cd2+ shock (EABCd2+-III0.5) decreased by 16.31% compared to EABCK-III. Moreover, intracellular NADH, c-Cyts, and the abundance of electroactive species were essential indicators to evaluate EET behavior of EABs. In EABCd2+-III0.5, these indicators decreased by 26.32%, 33.40%, and 20.65%, respectively. Structural equation modeling analysis established quantitative correlations between core components and electrochemical activity at cellular and community levels. The correlation analysis revealed that the growth and electron transfer functions of EABs were predictive indicators for their electrochemical performance, with standardized path coefficients of 0.407 and 0.358, respectively. These findings enhance our understanding of EABs' response to Cd2+ shock and provide insights for improving their performance in heavy metal wastewater.

Anodic ammonium oxidation in microbial electrolysis cell: Towards nitrogen removal in low C/N environment

Biological nitrogen removal in low C/N environment is challenging in wastewater treatment for a long time. Autotrophic ammonium oxidation is promising due to the no need of carbon source addition, but alternative electron acceptors other than oxygen has to be widely investigated. Recently, microbial electrolysis cell (MEC), which applies a polarized inert electrode as the electron harvester, has been proved effective to oxidize ammonium with electroactive biofilm. That is, anodic microbes stimulated by exogenous low power can extract electron from ammonium and transfer electron to electrodes. This review aims to consolidate the recent advances in anodic ammonium oxidation in MEC. Various technologies based on different functional microbes and mechanisms of these processes are reviewed. Thereafter, the crucial factors influencing the ammonium oxidation technology are discussed. Challenges and prospects of anodic ammonium oxidation in ammonium-containing wastewater treatment are also proposed to provide valuable insights on the technologic reference and potential value of MEC in ammonium-containing wastewater treatment.

Nitrogen removal from mature landfill leachate through enhanced Partial Nitrification-Anammox process in an innovative multi-stage fixed biofilm reactor

In the current integrated PN/A method/process for mature landfill leachate treatment, microbial inhibition and low nitrogen removal capacity are the big barriers due to high ammonia concentration and low C/N. This study aimed to evaluate the performance of a high-rate nitrogen removal lab-scale reactor, which combines pre-denitrification and Partial Nitrification-Anammox (PN/A) in a multi-stage fixed biofilm reactor (MFBR), for mature landfill leachate treatment. A nitrogen removal efficiency (NRE) of 90.43 % and an average nitrogen removal rate (NRR) of 0.94 kg/m³·d were observed at an influent NH+ 4-N concentration of 2274.39 mg/L during the last operational phase. The nitrogen mass balance showed that the nitrogen concentration gradually decreases along the course, and nitrogen was mainly removed in the aerobic chambers, in which Anammox contributed to 86.4 % of the removed nitrogen, while the front anoxic chamber is mainly used to remove NO- 3-N from the recirculation. Redundancy analysis showed that the variation in NH+ 4-N concentration along the course was the main factor affecting microbial community succession, which shows that the reactor configuration enables efficient cooperation and distribution of different microorganisms. Moreover, economic analysis of MFBR process showed that the energy consumption and carbon addition were reduced by 58.9 % and 100 %, respectively. Therefore, the MFBR established in this study, with its new configuration, achieves efficient treatment of landfill leachate in a single reactor and is environmentally friendly, and could be considered as a reference for full-scale landfill leachate treatment.

Simultaneous removal of phosphate, calcium, and ammonia nitrogen in a hydrogel immobilized reactor with bentonite/lanthanum/PVA based on microbial induced calcium precipitation

In recent years, it is urgent to solve nitrogen and phosphorus pollution in domestic wastewater. The target strain Pseudomonas sp. Y1 was immobilized using polyvinyl alcohol (PVA) matrix coupled with bentonite and lanthanum (La), respectively, to fabricate four hydrogel materials that used to construct bioreactors. The optimal operating parameters and dephosphorization mechanism were discussed, and the effects of hydrogel materials and different loads on the performance of the bioreactor were contrastively analyzed. The results manifested that when the hydraulic retention time (HRT) was 6.0 h, the C/N was 6.0, and the Ca²⁺ concentration was 100.0 mg L^-1, the bioreactors had the best heterotrophic nitrification-aerobic denitrification (HNAD) and biomineralization capacity, and the maximum removal efficiencies of Ca²⁺, PO₄^3--P, and NH₄⁺-N were 82.57, 99.17, and 89.08%, respectively. The operation data indicated that the addition of bentonite significantly promoted HNAD, and the bioreactor had stronger dephosphorization ability in the presence of La. The main phosphorous removal mechanisms were confirmed to be adsorption and co-precipitation. Finally, high-throughput sequencing results indicated that Pseudomonas accounted for the paramount proportion in the bioreactor, and the prediction of functional genes indicated that the C/N of 6.0 is more favorable for the expression of nitrogen removal-related functional genes in the bioreactor system. This study highlights the superiority of microbial induced calcium precipitation (MICP) combined with PVA hydrogel, and provides a theoretical basis for simultaneous nitrogen and phosphate removal of wastewater.

Impact of pyroxasulfone on sugarcane rhizosphere microbiome and functioning during field degradation

Pyroxasulfone (PYR) is a widely used herbicide, but its effects on non-target organisms, particularly microorganisms, are largely unknown. Herein, we investigated the effects of various doses of PYR on the sugarcane rhizosphere microbiome by using amplicon sequencing of rRNA genes and quantitative PCR techniques. Correlation analyses indicated that several bacterial phyla (Verrucomicrobia and Rhodothermaeota) and genera (Streptomyces and Ignavibacteria) strongly responded to PYR application. Additionally, we found that both bacterial diversity and composition were significantly altered after 30 days, indicating a prolonged effect of the herbicide. Moreover, co-occurrence analyses of the bacterial community showed that the network complexity was significantly decreased by PYR at day 45. Furthermore, FAPROTAX analysis suggested that some functions with implications for carbon cycling groups were significantly altered after 30 days. Overall, we provide the first indications that PYR may not pose a significant risk for altering microbial communities in the short term (less than 30 days). However, its potential negative effects on bacterial communities in the middle and late stages of degradation deserve further attention. To our knowledge, this is the first study to provide insight into the effects of PYR on the rhizosphere microbiome, providing an extended basis for future risk assessments.

Responses of anammox and sulfur/pyrite autotrophic denitrification in one-stage system to high nitrogen load: Performance, metabolic and bacterial community

To remove residual nitrate from anammox process and achieve efficient nitrogen removal, a two-stage system (TAS) with the two individual reactors and a one-stage system (OAS) with the spatial functional areas in one reactor were established via anammox coupling sulfur autotrophic denitrification. The total nitrogen removal efficiency (TNRE) of OAS system (97.85 ± 1.92%) was higher than that of TAS system (93.63 ± 1.87%) under the influent NH₄⁺-N and NO₂^--N of 227 and 300 mg/L. Meanwhile, the responses of microbial metabolism to high nitrogen load were investigated in term of microbial metabolites, electron transfer and metabolic activity. Microbial metabolites characteristics demonstrated that the OAS system secreted more EPS with lower protein (PN)/polysaccharide (PS) ratio than that in the TAS system, which was beneficial to protect bacteria from high nitrogen load. Electrochemical analysis suggested that the secretion of electron conductive substance (such as PN, PS) and redox active substances (such as flavin mononucleotide, the binding of flavins and cytochrome c on the outer membrane) were increased in the OAS system, which promoted the electron transfer efficiency. Moreover, the electron transport system activity (ETSA) values and ATP contents in OAS system were higher than that in the TAS system, which indicated that metabolic activity was improved in OAS system under the stimulation of high nitrogen load. Additionally, the bacterial community analysis indicated that the functional bacteria of Candidatus_Kuenenia and Armatimonadetes_gp5 had higher abundance in the OAS system than that in the TAS system, which was beneficial to realize the stable nitrogen removal performance. Overall, the responses mechanism of the OAS system was established to explain the resistant to high nitrogen load.

Sustainable nitrogen removal in anammox-mediated systems: Microbial metabolic pathways, operational conditions and mathematical modelling

Anammox-mediated systems have attracted considerable attention as alternative cost-effective technologies for sustainable nitrogen (N) removal from wastewater. This review comprehensively highlights the importance of understanding microbial metabolism in anammox-mediated systems under crucial operation parameters, indicating the potentially wide applications for the sustainable treatment of N-containing wastewater. The partial nitrification-anammox (PN-A), simultaneous PN-A and denitrification (SNAD) processes have demonstrated sustainable N removal from sidestream wastewater. The partial denitrification-anammox (PD-A) and denitrifying anaerobic methane oxidation-anammox (DAMO-A) processes have advanced sustainable N removal efficiency in mainstream wastewater treatment. Moreover, N2O production/emission hotspots are extensively discussed in anammox-based processes and are related to the dominant ammonia-oxidizing bacteria (AOB) and denitrifying heterotrophs. In contrast, N2O is not produced in the metabolism pathways of AnAOB and DAMO-archaea; Moreover, the actual contribution of N2O production by dissimilatory nitrate reduction to ammonium (DNRA) and DAMO-bacteria in their species remains uncertain. Thus, PD-A and DAMO-A processes would achieve reduction in greenhouse gas production, as well as energy consumption for the reliability of N removal efficiencies. In addition to reaction mechanisms, this review covers the mathematical models for simultaneous anammox, partial nitrification and/or denitrification (i.e., PN-A, PD-A, and SNAD). Promising NO3- reduction technologies by endogenous PD, sulfur-driven autotrophic denitrification, and DNRA by anammox are also discussed. In summary, this review provides a better understanding of sustainable N removal in anammox-mediated systems, thereby encouraging future investigation and exploration of the sustainable N bio-treatment from wastewater.

Accelerating denitrification and mitigating nitrite accumulation by multiple electron transfer pathways between Shewanella oneidensis MR-1 and denitrifying microbial community

The bio-denitrification was usually retarded by the unbalance of electron generation and consumption. In this study, mixing S. oneidensis MR-1 with denitrifying microbial community increased the nitrogen removal rate by 74.74 % via the interspecies electron transfer (IET), and reduced the accumulated nitrite from 9.90 ± 0.81 to 0.02 ± 0.03 mg/L. Enhanced denitrification still appeared but relatively decreased, when S. oneidensis MR-1 was separated by a dialysis bag (MW < 3000), indicating mediated interspecies electron transfer (MIET) counted in IET. The results of electron transfer activity and sludge conductivity suggested DIET and MIET jointly transfer electrons from MR-1 to electroactive denitrifying bacteria (EDB), improving denitrifying reductase activities. Electron distribution among denitrifying reductases was found to be associated with the IET rate. Microbial insights showed the total abundance of EDB was increased, and denitrifying genes were correspondingly enriched. Pseudomonas was found to cooperate with exoelectrogens in a complicated microbial community.

Impacts of humic-based products on the microbial community structure and functions toward sustainable agriculture

Humic-based products (HPs) are carbon-rich organic amendments in the forms of extracted humic substances from manure, compost, and raw and extracted forms of lignites, coals and peats. HPs are widely used in agriculture and have beneficial effects on plants. While the agronomic benefits of HPs have been widely reported, information on their impact on the soil microbial community composition and functions is lacking, despite claims made by companies of humic substances as biostimulants. In this review, we explored published research on microbial responses with HPs application in an agronomic context. Although research data are sparse, current results suggest indirect impacts of HPs on microbial community composition and activities. HPs application changes the physico-chemical properties of the soil and influence root exudation, which in turn impact the microbial structure and function of the soil and rhizosphere. Application of HPs to the soil as biostimulants seemed to favor plant/soil beneficial bacterial community composition. HPs impacts on microbial activities that influence soil biogeochemical functioning remain unclear; existing data are also inconsistent and contradictory. The structural properties of HPs caused inconsistencies in their reported impacts on soil properties and plants. The sources of HPs and forms (whether extracted or raw), soil type, geographic location, crop species, and management strategies, among others, affect microbial communities affecting HPs efficacy as biostimulants. A more holistic approach to research encompassing multiple influential factors and leveraging the next-generation sequencing technology is needed to unravel the impacts of HPs on the soil microbiome. Addressing these knowledge gaps facilitates sustainable and efficient use of HPs as organic agricultural amendments reducing the use of chemical fertilizers.

Multi-Omics Analysis Reveals the Nitrogen Removal Mechanism Induced by Electron Flow during the Start-up of the Anammox-Centered Process

Significant progress in understanding the key enzymes or species of anammox has been made; however, the nitrogen removal mechanism in complex coupling systems centered on anammox remains limited. In this study, by the combination of metagenomics-metatranscriptomics analyses, the nitrogen removal in the anammox-centered coupling system that entails partial denitrification (PD) and hydrolytic acidification (HA, A-PDHA) was elucidated to be the nitrogen transformation driven by the electron generation-transport-consumption process. The results showed that a total nitrogen (TN) removal efficiency of >98%, with a TN effluence of <1 mg/L and a TN removal contribution via anammox of >98%, was achieved after 59 days under famine operation and alkaline conditions during the start-up process. Further investigation confirmed that famine operation promoted the activity of genes responsible for electron generation in anammox, and increased the abundance or expression of genes related to electron consumption. Alkaline conditions enhanced the electron generation for PD by upregulating the activity of glyceraldehyde 3-phosphate dehydrogenase and strengthened electron transfer by increasing the gene encoding quinone pool. Altogether, these variations in the electron flow led to efficient nitrogen removal. These results improve our understanding of the nitrogen removal mechanism and application of the anammox-centered coupling systems in treating nitrogen wastewater.

Advanced nitrogen removal from mature landfill leachate based on novel step-draining partial nitrification-denitrification and Anammox process: Significance of low volume exchange ratio

To save external carbon source dosage and simplify NH4+ to NO2- ratio control strategy, this study established a novel step-draining based partial nitrification-denitrification and Anammox (PND-AMX) system for advanced nitrogen removal from mature landfill leachate. Separation of partial nitrification and denitrification was realized based on step-draining, achieving 74.8 % nitrogen removal. 25 % was the optimal volume exchange ratio for synergistic removal of organics and nitrogen, allowing full use of carbon source. NH4+ to NO2- ratio was easily controlled by varying the volume ratio of the first and second effluent of PND reactor. Brocadia, Kuenenia and Jettenia collectively accounted for 13.61 % in AMX reactor, contributing 21.0 % of nitrogen removal. Nitrogen removal efficiency and nitrogen removal rate reached 98.3 ± 1.2 % and 3.07 ± 0.09 kgN/(m3∙d), respectively. Partial Anammox process based on step-draining was easier to realize and of practical significance for application in treatment of landfill leachate.

Synchronous removal of ammonia nitrogen, phosphate, and calcium by heterotrophic nitrifying strain Pseudomonas sp. Y1 based on microbial induced calcium precipitation

Pseudomonas sp. Y1, a strain with superior synchronous removal ability of ammonia nitrogen (NH₄⁺-N), phosphate (PO₄^3--P), and calcium (Ca²⁺) was isolated, with the removal efficiencies of 92.04, 99.98, and 83.40 %, respectively. Meanwhile, the chemical oxygen demand (COD) was degraded by 90.33 %. Through kinetic analysis, the optimal cultivated conditions for heterotrophic nitrification-aerobic denitrification (HNAD) and biomineralization were determined. The growth curves experimental results of different nitrogen sources indicated that strain Y1 could remove NH₄⁺-N through HNAD. The results of excitation-emission matrix (EEM) proved that the appearance of extracellular polymeric substances (EPS) promoted the precipitation of phosphate minerals. Finally, the characterization results of the bioprecipitates showed that the HNAD process produced the alkalinity required for microbial induced calcium precipitation (MICP), resulting in the removal of PO₄^3- via adsorption and co-precipitation. This study provides a theoretical basis for the application of microorganisms to achieve synchronous nutrient removal and phosphorus recovery in wastewater.