Fate and removal efficiency of polystyrene nanoplastics in a pilot drinking water treatment plant

Efficient, quick, and low-carbon removal mechanism of microplastics based on integrated gel coagulation-spontaneous flotation process

To address the problems of unstable efficiency, long treatment period, and high energy consumption during microplastics (MPs) removal by traditional coagulation-flotation technology, a gel coagulation-spontaneous flotation (GCSF) process is proposed that employs laminarin (LA) as the crosslinker and polyaluminum chloride (PAC)/polyaluminum ferric chloride (PAFC) as the coagulant to remove MPs. Herein, the effects of GCSF chemical conditions on microplastic-humic acid composite pollutants (MP-HAs) removal were investigated, and the removal mechanisms were analyzed through theoretical calculations and floc structure characterization. Results showed that an LA to PAC/PAFC ratio of 2.5:1 achieved the highest removal of HA (86 %) and MPs (93 %-99 %) in short coagulation (< 1 min) and spontaneous flotation (< 9 min) period. PAC-LA exhibited strong removal ability for MP-HAs while PAFC-LA induced fast flotation speed. The peak intensity and peak shift in Fourier-transformed infrared and X-ray photo-electron spectra indicated that the removal mechanisms of MPs include hydrogen bond adsorption and the sweeping effect, mainly relying on -OH/-C = O on the MPs surface and entrapment of gel flocs with a high degree of aggregation, respectively. The extended Derjaguin-Landau-Verwey-Overbeek calculation also revealed that interactions between PAC/PAFC-LA and MP-HAs were mainly polar interaction (hydrogen bonding) and intermolecular attraction interaction (Lifshitz-van der Waals force), and the sweep effect was reflected by intermolecular interaction. In addition, density function theory calculations indicated that -OH in LA mainly adsorbs DO through a double hydrogen bond configuration, and the crosslinking ligand FeO6/AlO6 assists in DO absorption by -OH.

Physiological and molecular effects of contaminants of emerging concerns of micro and nano-size in aquatic metazoans: overview and current gaps in Antarctic species

Although Antarctica is the most isolated continent on Earth, its remote location does not protect it from the impacts of human activities. Antarctic metazoans such as filter-feeding invertebrates are a crucial component of the Antarctic benthos. They play a key role in the benthic-pelagic carbon flux in coastal areas by filtering particles and planktonic organisms from the sediment-water interface. Due to their peculiar ecological niche, these organisms can be considered a wasp-waist in the ecosystem, making them highly sensitive to marine pollution. Recently, anthropogenic particles such as micro-nanoplastics and manufactured nanoparticles (MNP) have been classified as contaminants of emerging concern (CEC) due to their small size range, which also overlaps with the preferred particle size ingested by aquatic metazoans. Indeed, it has been demonstrated that some species such as Antarctic krill can ingest, transform, and release MNPs, making them newly bioavailable for other Antarctic filter-feeding organisms. Similarly, the production and use of anthropogenic MNP are rapidly increasing, leading to a growing presence of materials, such as nano-sized metal-oxides, in the environment. For these reasons, it is important to provide evidence of the adverse effects of such emerging contaminants at sub-lethal concentrations in environmental risk assessments. These contaminants may cause cascade effects with consequences not only on individuals but also at the community and ecosystem levels. In this review, we discuss the state-of-the-art knowledge on the physiological and molecular effects of anthropogenic MNP in Antarctic aquatic metazoans. We further highlight the importance of identifying early biomarkers using sessile metazoans as sentinels of environmental health.

Harnessing Magnetic Nanoparticles for the Effective Removal of Micro- and Nanoplastics: A Critical Review

The spread of micro- (MPs) and nanoplastics (NPs) in the environment has become a significant environmental concern, necessitating effective removal strategies. In this comprehensive scientific review, we examine the use of magnetic nanoparticles (MNPs) as a promising technology for the removal of MPs and NPs from water. We first describe the issues of MPs and NPs and their impact on the environment and human health. Then, the fundamental principles of using MNPs for the removal of these pollutants will be presented, emphasizing that MNPs enable the selective binding and separation of MPs and NPs from water sources. Furthermore, we provide a short summary of various types of MNPs that have proven effective in the removal of MPs and NPs. These include ferromagnetic nanoparticles and MNPs coated with organic polymers, as well as nanocomposites and magnetic nanostructures. We also review their properties, such as magnetic saturation, size, shape, surface functionalization, and stability, and their influence on removal efficiency. Next, we describe different methods of utilizing MNPs for the removal of MPs and NPs. We discuss their advantages, limitations, and potential for further development in detail. In the final part of the review, we provide an overview of the existing studies and results demonstrating the effectiveness of using MNPs for the removal of MPs and NPs from water. We also address the challenges that need to be overcome, such as nanoparticle optimization, process scalability, and the removal and recycling of nanoparticles after the completion of the process. This comprehensive scientific review offers extensive insights into the use of MNPs for the removal of MPs and NPs from water. With improved understanding and the development of advanced materials and methods, this technology can play a crucial role in addressing the issues of MPs and NPs and preserving a clean and healthy environment. The novelty of this review article is the emphasis on MNPs for the removal of MPs and NPs from water and a detailed review of the advantages and disadvantages of various MNPs for the mentioned application. Additionally, a review of a large number of publications in this field is provided.

Recent advances in microplastic removal from drinking water by coagulation: Removal mechanisms and influencing factors

Microplastics (MPs) are emerging contaminants that are widely detected in drinking water and pose a potential risk to humans. Therefore, the MP removal from drinking water is a critical challenge. Recent studies have shown that MPs can be removed by coagulation. However, the coagulation removal of MPs from drinking water remains inadequately understood. Herein, the efficiency, mechanisms, and influencing factors of coagulation for removing MPs from drinking water are critically reviewed. First, the efficiency of MP removal by coagulation in drinking water treatment plants (DWTPs) and laboratories was comprehensively summarized, which indicated that coagulation plays an important role in MP removal from drinking water. The difference in removal effectiveness between the DWTPs and laboratory was mainly due to variations in treatment conditions and limitations of the detection techniques. Several dominant coagulation mechanisms for removing MPs and their research methods are thoroughly discussed. Charge neutralization is more relevant for small-sized MPs, whereas large-sized MPs are more dependent on adsorption bridging and sweeping. Furthermore, the factors influencing the efficiency of MP removal were jointly analyzed using meta-analysis and a random forest model. The meta-analysis was used to quantify the individual effects of each factor on coagulation removal efficiency by performing subgroup analysis. The random forest model quantified the relative importance of the influencing factors on removal efficiency, the results of which were ordered as follows: MPs shape > Coagulant type > Coagulant dosage > MPs concentration > MPs size > MPs type > pH. Finally, knowledge gaps and potential future directions are proposed. This review assists in the understanding of the coagulation removal of MPs, and provides novel insight into the challenges posed by MPs in drinking water.

Filtration of polystyrene nanoplastics with different functional groups by natural mineral materials: Performance and mechanisms

Optimizing nanoplastics (NPs) removal performance of rapid sand filter (RSF) in water treatment plants is significant for NP pollution prevention and remediation. This study investigated the application prospect of natural granular manganese sand, zeolite and limestone in RSF for NP removal through column experiments. Pristine, amino-modified, and carboxyl-modified polystyrene NPs (100 nm) were selected as experimental subjects. Quartz sand filter showed negligible NP removal, zeolite and manganese sand showed no obvious optimization on NP filtration. Limestone amended RSF significantly enhanced the removal of three NPs, the removal efficiency increased with decreasing size and increasing limestone grains dosage. The excellent performance of limestone was attributed to its special physicochemical properties in terms of synthetical action of electrostatic interaction, cationic bridging and especially the surface roughness morphology, and the mechanisms overcame the influence of functional groups of NPs. The results indicate the prospective applications of granular limestone in RSF for NP filtration.

Rapid sand filtration for <10 μm-sized microplastic removal in tap water treatment: Efficiency and adsorption mechanisms

The omnipresence of microplastics (MPs) in potable water has become a major concern due to their potential disruptive effect on human health. Therefore, the effective removal of MPs in drinking water is essential for life preservation. In this study, tap water containing microplastic <10 μm in size was treated using constructed pilot-scale rapid sand filtration (RSF) system to investigate the removal efficiency and the mechanisms involved. The results show that the RSF provides significant capacity for the removal and immobilization of MPs < 10 μm diameter (achieving 98 %). Results showed that silicate sand reacted with MPs through a cooperative assembly process, which mainly involved interception, trapping, entanglement, and adsorption. The MPs were quantified by Flow cytometry instrument. A kinetics study underlined the pivotal role of physio-chemisorption in the removal process. MP particles smaller than absorbents, saturation of adsorbents, and reactor hydrodynamics were identified as limiting factors, which were alleviated by backwashing. Backwashing promoted the desorption of up to 97 % MPs, conducive for adsorbent active site regeneration. These findings revealed the critical role of RSF and the importance of backwashing in removing MPs. Understanding the mechanisms involved in removing microplastics from drinking water is crucial in developing more efficient strategies to eliminate them.

Microplastics attenuation from surface water to drinking water: Impact of treatment and managed aquifer recharge - and identification uncertainties

River water can be used to recharge aquifers exploited for drinking water production. Several recent studies reported microplastics (MPs) in river water, and therefore, the potential contamination of groundwater by MPs is a growing concern among stakeholders and citizens. In this research, we investigate the fate of MPs (> 20 μm) along six different stages of a major Managed Aquifer Recharge (MAR)-water supply system in Switzerland. About 20 l of water were filtered using steel meshes at each location in triplicates. In the laboratory, MPs deposited on the anodisc filters were identified using Focal Plane Array (FPA) micro-Fourier-Transform-InfraRed (μFTIR) spectroscopy. The obtained hyperspectral data were processed using the imaging software Microplastics Finder for MPs identification and classification. Our results revealed a 20-fold decrease in MPs concentration from the Rhine River bed water (112 ± 27.4 MPs/l) to after the coagulation, flocculation and sedimentation (5.5 ± 2.2 MPs/l), a further 3-fold decrease to after the sand-filtration system (1.8 ± 0.9 MPs/l), corresponding to an overall removal efficiency of 98.4 %. The MPs concentrations remained low following MAR (2.7 ± 0.7 MPs/l) through a Quaternary gravel aquifer. Activated carbon filters did not substantially further reduce MPs concentrations. The percentage of fragments (≈95 %) prevailed over fibers (≈5 %) at all locations, with fibers being longer and more abundant in the river water. Overall, this study demonstrates the effectiveness of the treatment systems to remove MPs larger than 20 μm. Finally, we calculated an uncertainty in MPs concentrations of one order of magnitude depending on the user-defined parameters inside the MPs identification and classification model. The Quality Assurance/Quality Control approach followed during laboratory analysis highlighted an accumulation of surrogate particles at the edges of the disc, which would have an impact for MPs number upscaling.

Interaction of chitosan with nanoplastic in water: The effect of environmental conditions, particle properties, and potential for in situ remediation

Micro- and nanoplastic (MNP) pollution in aquatic ecosystems requires investigation on its source, transport, and extent to assess and mitigate its risks. Chitosan is a potential biomolecule for water treatment, but its interaction with MNP is undefined. In this work, chitosan-nanoplastic interaction was explored in the laboratory under environmentally relevant conditions using polystyrene (PS) nanoplastic (NP) as model particle to identify conditions at which PS-chitosan interaction resulted in aggregation. Aggregation limits NP transport and allows separation of NP for targeted remediation. The effect of environmental conditions (pH, salinity, dissolved organic matter (DOM) content), chitosan particle size and NP surface modification on chitosan-NP interaction was studied at various chitosan doses. PS aggregated at chitosan doses as low as 0.2 % w/w, while higher doses of chitosan resulted in re-stabilization of NP in solution, restoring the particle size to its initial value. Increasing pH, DOM, or carboxyl modification of the NP surface also improved NP stability in solution. Increased salinity of the solution caused aggregation of unmodified PS independent of chitosan, but carboxyl-modified PS remained stable and aggregated at the same chitosan doses across all salinity levels. Chitosan with low molecular weight promoted PS aggregation at lower doses. Notably, zeta potential (ZP) alone did not indicate chitosan-induced PS aggregation, which occurred independently of changes in ZP. DLVO calculations based on ZP, however, still indicated attractive interaction due to charge differences, albeit with less contrast at high pH, salinity, and DOM content. Additional insights gained in the work recommend caution when using spectrophotometric methods to assess NP removal. Overall, this study demonstrates that chitosan impacts NP transport and holds potential for water remediation of NP.

Retention and Transport of Nanoplastics with Different Surface Functionalities in a Sand Filtration System

The efficiency of sand filtration was investigated in terms of the behavior of the nanoplastics (NPLs) with different surface functionalities. The initial condition concentrations of NPLs were varied, and their effects on retention and transport were investigated under a constant flow rate in saturated porous media. The behavior of NPLs in this porous system was discussed by considering Z- average size and zeta (ζ) potential measurements of each effluent. The retention efficiencies of NPLs were ranked as functionalized with amidine [A-PS]+ > with sulfate [S-PS]- > with surfactant-coated amidine [SDS-A-PS]-. The reversibility of the adsorption process was revealed by introducing surfactant into the sand filter system containing adsorbed [A-PS]+ at three different initial state concentration conditions. The deposition behavior on sand grain showed that positively charged NPLs were attached to the quartz surface, and negatively charged NPLs were attached to the edge of the clay minerals, which can be caused by electrical heterogeneities. The homoaggregates made of positively charged NPLs were more compact than those made of negatively charged NPLs and surfactant-coated NPLs. An anti-correlation was revealed, suggesting a connection between the fractal dimension (Df) of NPL aggregates and retention efficiencies. Increased Df values are associated with decreased retention efficiencies.The findings underscore the crucial influence of NPL surface properties in terms of retention efficiency and reversible adsorption in the presence of surfactants in sand filtration systems.

Insights into Anthropogenic Micro- and Nanoplastic Accumulation in Drinking Water Sources and Their Potential Effects on Human Health

Anthropogenic microplastics (MPs) and nanoplastics (NPs) are ubiquitous pollutants found in aquatic, food, soil and air environments. Recently, drinking water for human consumption has been considered a significant pathway for ingestion of such plastic pollutants. Most of the analytical methods developed for detection and identification of MPs have been established for particles with sizes > 10 μm, but new analytical approaches are required to identify NPs below 1 μm. This review aims to evaluate the most recent information on the release of MPs and NPs in water sources intended for human consumption, specifically tap water and commercial bottled water. The potential effects on human health of dermal exposure, inhalation, and ingestion of these particles were examined. Emerging technologies used to remove MPs and/or NPs from drinking water sources and their advantages and limitations were also assessed. The main findings showed that the MPs with sizes > 10 μm were completely removed from drinking water treatment plants (DWTPs). The smallest NP identified using pyrolysis-gas chromatography-mass spectrometry (Pyr-GC/MS) had a diameter of 58 nm. Contamination with MPs/NPs can occur during the distribution of tap water to consumers, as well as when opening and closing screw caps of bottled water or when using recycled plastic or glass bottles for drinking water. In conclusion, this comprehensive study emphasizes the importance of a unified approach to detect MPs and NPs in drinking water, as well as raising the awareness of regulators, policymakers and the public about the impact of these pollutants, which pose a human health risk.

Stability of arsenic(Ⅲ, Ⅴ) in galvanized steel pipe scales coexisting with colloidal polystyrene microplastics under drinking water conditions

The stability of metalloid arsenic (As(Ⅲ)) and As(V) in corrosion scales of drinking water distribution systems (DWDS) is closely related to drinking water safety. The effects of colloidal microplastics entering the DWDS on the stability of As(Ⅲ) and As(V) have not been understood. This study investigated the migration and transformation behaviors of As (Ⅲ) and As(V) in the galvanized steel pipe scales employing speciation simulation and sequential extraction methods. The stability of As(Ⅲ) and As(V) in the pipe scales coexisting with colloidal polystyrene microplastics (CPMPs) under drinking water conditions was studied for the first time from the release behaviors and form distributions. Finally, the optimum water quality conditions for As(Ⅲ) and As(V) fixation were summarized. The existing forms of As(Ⅲ) and As(V) under different pH conditions, the competitive action of anions, and the hydrolysis of cations all would significantly affect the stability of As(Ⅲ) and As(V). Sequential extraction method results revealed that the content of As fractions increased in different forms after the pipe scales adsorbed As(Ⅲ) and As(V). The contents of As and iron (Fe) in the form of residual fractions increased in the presence of CPMPs. The effect of three cations on the stability of As(Ⅲ) and As(V) was Fe³⁺ > Zn²⁺ > Ca²⁺. Neutral to weak alkalescence, proper Cl^- and cation concentrations were conducive to the fixation of As in DWDS. Notably, the presence of CPMPs could increase the stability of As(Ⅲ) and As(V) in corrosion scales, thus reducing the risk of metalloid As release in DWDS.

The suitability and mechanism of polyaluminum-titanium chloride composite coagulant (PATC) for polystyrene microplastic removal: Structural characterization and theoretical calculation

Microplastics (MPs) particles bring potential threats to the aqueous environment, and the coexistence of natural organic matter (NOM) enhances their toxicity. Coagulation is an efficient method for particle removal and exploring the binding sites and modes of the coagulant hydrolysates with MPs in the presence of NOM is essential to understand the coagulation mechanism. In this study, a novel polymerized polyaluminum-titanium chloride composite coagulant (PATC) was prepared and used to remove polystyrene (PS). It was found that PATC could compress or even destroy the surface layer of the negatively charged PS. In comparison to PAC and PTC, PATC was more efficient in decreasing the energy barrier of the PS particles and increasing their aggregation rate over a wider pH range. The results of the Extended Derjaguin-Landau-Verwey-Overbeek (XDLVO) calculation revealed that the interaction between the hydrolysates of PATC and PS was mainly polar interaction (V_AB), such as hydrogen bonding. The peak intensity and peak shift in Fourier-transformed infrared (FTIR) and X-ray photoelectron spectra (XPS) were analyzed to further explore the interaction between the hydrolysates of PATC and PS. It was found that hydrogen bonding existed between the -OH group of PATC and the aliphatic C-H and C=O groups of PS. And the main interaction between HA and PS was the π-π* conjugation and hydrogen bonding between the -COOH, -OH, and C=O groups of HA and the C=O and aliphatic C-H groups of PS. Therefore, in the HA@PS system, the active sites of HA (e.g. -COOH and -OH) and PS (e.g., C=O and aliphatic C-H) binding with the coagulants were occupied, which accordingly led to the dramatic decline in the removal efficiency of both HA and PS. In actual lake water treatment, although the removal efficiency of PS was significantly poor, PATC performed better for PS removal than PAC and PTC. Besides, the effluent pH was maintained at 6.81±0.08, which met the requirements of the subsequent water treatment process. This study provides systematic knowledge for understanding the interaction between PS, NOM, and coagulant hydrolysates, and further confirms the application potential of PATC for MPs removal.

Insights into the removal of microplastics and microfibres by Advanced Oxidation Processes

Water treatment plants' effluents are hotspots of microplastics (MPs) and microfibres (MFs) released into the aquatic environment because they were not designed to capture these particles. Special attention should be given to MFs, since they mainly come from laundry and are related to one of the main MP shapes detected in water and wastewater treatment plants. In this sense, Advanced Oxidation Processes (AOPs) could be a feasible solution for tackling MP and MF pollution, however, it is still premature to extract conclusions due to the limited number of studies on the degradation of these particles (specifically MFs) using AOPs. This review addresses the impacts of AOPs on MPs/MFs, focusing on their degradation efficiency, toxicity, and sustainability of the processes, among other aspects. The review points out that polyamide MFs can achieve mass loss >90% by photocatalytic system using TiO₂. Also, the low oxidation of MPs (<30 %) by conventional Fenton process affects mainly the surface of the MPs. However, other Fenton-based processes can provide better removal of some types of MPs, mainly using temperatures >100 °C, reaction time ≥ 5 h, and initial pH ≤ 3, achieving MP weight loss up to 96 %. Despite these results, better operating conditions are still required for AOPs since the ones reported so far are not feasible for full-scale application. Additionally, ozonation in treatment plants has increased the fragmentation of MPs (including MFs), leading to a new generation of MPs. More attention is needed on toxicity effects of intermediates and methods of analysis employed for the analysis of MPs/MFs in wastewater effluent should be standardized so that studies can be compared effectively. Future research should focus on the sustainability of the AOP for MP removal in water treatment (power consumption, chemicals consumed and operational costs) for a better understanding of full-scale applicability of AOP adapted to MP treatment.

Environmental challenges of COVID-19 pandemic: resilience and sustainability - A review

The emergence of novel respiratory disease (COVID-19) caused by SARS-CoV-2 has become a public health emergency worldwide and perturbed the global economy and ecosystem services. Many studies have reported the presence of SARS-CoV-2 in different environmental compartments, its transmission via environmental routes, and potential environmental challenges posed by the COVID-19 pandemic. None of these studies have comprehensively reviewed the bidirectional relationship between the COVID-19 pandemic and the environment. For the first time, we explored the relationship between the environment and the SARS-CoV-2 virus/COVID-19 and how they affect each other. Supporting evidence presented here clearly demonstrates the presence of SARS-CoV-2 in soil and water, denoting the role of the environment in the COVID-19 transmission process. However, most studies fail to determine if the viral genomes they have discovered are infectious, which could be affected by the environmental factors in which they are found.The potential environmental impact of the pandemic, including water pollution, chemical contamination, increased generation of non-biodegradable waste, and single-use plastics have received the most attention. For the most part, efficient measures have been used to address the current environmental challenges from COVID-19, including using environmentally friendly disinfection technologies and employing measures to reduce the production of plastic wastes, such as the reuse and recycling of plastics. Developing sustainable solutions to counter the environmental challenges posed by the COVID-19 pandemic should be included in national preparedness strategies. In conclusion, combating the pandemic and accomplishing public health goals should be balanced with environmentally sustainable measures, as the two are closely intertwined.

Removal of nanoplastics in water treatment processes: A review

Nanoplastics are drawing a significant attention as a result of their propensity to spread across the environment and pose a threat to all organisms. The presence of nanoplastics in water is given attention nowadays as the transit of nanoplastics occurs through the aquatic ecosphere besides terrestrial mobility. The principal removal procedures for macro-and micro-plastic particles are effective, but nanoparticles escape from the treatment, increasing in the water and significantly influencing the society. This critical review is aimed to bestow the removal technologies of nanoplastics from aquatic ecosystems, with a focus on the treatment of freshwater, drinking water, and wastewater, as well as the importance of transit and its impact on health concerns. Still, there exists a gap in providing a collective knowledge on the methods available for nanoplastics removal. Hence, this review offered various nanoplastic removal technologies (microorganism-based degradation, membrane separation with a reactor, and photocatalysis) that could be the practical/effective measures along with the traditional procedures (filtration, coagulation, centrifugation, flocculation, and gravity settling). From the analyses of different treatment systems, the effectiveness of nanoplastics removal depends on various factors, source, size, and type of nanoplastics apart from the treatment method adopted. Combined removal methods, filtration with coagulation offer great scope for the removal of nanoplastics from drinking water with >99 % efficiency. The collected data could serve as base-line information for future research and development in water nanoplastics cleanup.

Removal of microplastics and nanoplastics from urban waters: Separation and degradation

The omnipresent micro/nanoplastics (MPs/NPs) in urban waters arouse great public concern. To build a MP/NP-free urban water system, enormous efforts have been made to meet this goal via separating and degrading MPs/NPs in urban waters. Herein, we comprehensively review the recent developments in the separation and degradation of MPs/NPs in urban waters. Efficient MP/NP separation techniques, such as adsorption, coagulation/flocculation, flotation, filtration, and magnetic separation are first summarized. The influence of functional materials/reagents, properties of MPs/NPs, and aquatic chemistry on the separation efficiency is analyzed. Then, MP/NP degradation methods, including electrochemical degradation, advanced oxidation processes (AOPs), photodegradation, photocatalytic degradation, and biological degradation are detailed. Also, the effects of critical functional materials/organisms and operational parameters on degradation performance are discussed. At last, the current challenges and prospects in the separation, degradation, and further upcycling of MPs/NPs in urban waters are outlined. This review will potentially guide the development of next-generation technologies for MP/NP pollution control in urban waters.