Assessing face masks in the environment by means of the DPSIR framework

Environmental impact of disposable face masks: degradation, wear, and cement mortar incorporation

Polypropylene (PP) disposable face masks (DFMs) are essential for limiting airborne infectious diseases. This study examines the behavior of DFMs under three scenarios: (i) exposure to the natural environment, (ii) simulated high-energy aquatic environments through an abrasion test, and (iii) incorporation into cement-based mortars. In the natural weathering experiment, after 117 days, the DFMs exhibited photodegradation, resulting in chemical alterations in carbonyl and hydroxyl groups. This degradation led to the breakdown of the polymer and the release of microplastics and nanoplastics. Controlled abrasion tests, conducted in a Denver ball with water, sand, and ceramic balls for 2 h, confirmed that water is a critical factor for fiber release from DFMs. These tests resulted in the release of 0.26 g of PP fibers from 20 DFMs (weighing 62 g in total) with a diameter of 20 µm. Weathering and abrasion tests indicated rapid release and degradation of microplastics and nanoplastics, underscoring the importance of pursuing actions like reuse. Ecotoxicological tests revealed that leachates from the DFM-incorporated mortars showed no adverse effects on Daphnia magna or Selenastrum capricornutum, unlike the reference mortar, which caused substantial toxicity to Daphnia magna. Incorporating PP fibers from DFMs into cement-based mortars showed promising potential, as indicated by favorable ecotoxicity and chemical leaching test results.

Assessment of the ecological and environmental effects of large-scale photovoltaic development in desert areas

Photovoltaic development has played a crucial role in mitigating the energy crisis and addressing global climate change. However, it has also had significant impacts on the ecological environment. To ensure the sustainable growth of the photovoltaic industry, it is essential to establish an indicator system to assess the ecological and environmental effects of photovoltaic development. This study utilizes the Driving-Pressure-Status-Impact-Response (DPSIR) framework to create an indicator system for evaluating the ecological and environmental effects of desert photovoltaic development. The study evaluates the ecological and environmental effects at the on-site (WPS), transitional zone (TPS), and off-site (OPS) areas of the Qinghai Gonghe Photovoltaic Park in China. The entropy weight method was utilized to calculate indicator weights, while the evaluation model and indicators were transformed uniformly to obtain standardized scores for ecological and environmental effects. and conducting a thorough analysis of the distribution characteristics and factors influencing the evaluation indicators' scores. Overall, the large-scale development of desert photovoltaics in Gonghe County has had a positive impact on the ecological environment. The WPS had better ecological and environmental conditions than did the TPS and OPS, and the ecological and environmental evaluation levels of the WPS were categorized as "general" (0.439), while the ecological and environmental effect evaluation levels of the TPS (0.286) and OPS (0.28) were both "poor", indicating significant room for improvement. Moreover, all indicators in the scheme layer, which are used to evaluate ecological and environmental quality, yielded higher scores for the WPS than for the TPS and OPS, demonstrating that photovoltaic development has a positive effect on desert area ecology and the environment.

Nano-based remediation strategies for micro and nanoplastic pollution

Due to rapid urbanization, there have been continuous environmental threats from different pollutants, especially from microplastics. Plastic products rapidly proliferate significantly contributing to the occurrence of micro-plastics, which poses a significant environmental risk. These microplastics originated from diverse sources and are characterized by their persistent and widespread occurrence; human health and the entire ecosystem are adversely affected by them. The removal of microplastics not only requires innovative technologies but also efficient materials capable of effectively eliminating them from our environment. The progress made so far has highlighted the advantages of utilizing the dimensional and structural properties of nanomaterials to increase the effectiveness of existing methods for micro-plastic treatment, aiming for a more sustainable approach to their removal. In the current review, we demonstrate a thorough overview of the sources, occurrences, and potential harmful effects of microplastics, followed by a further discussion of promising technologies used for their removal. An in-depth examination of both advantages and a few limitations of all these given technologies, including physical, chemical, and biological approaches, has been discussed. Additionally, the review explores the use of nanomaterials as an effective means to overcome obstacles and improve the efficiency of microplastic elimination methods. n conclusion, this review addresses, current challenges in this field and outlines the future perspectives for further research in this domain.

Masks and respirators for prevention of respiratory infections: a state of the science review

SUMMARYThis narrative review and meta-analysis summarizes a broad evidence base on the benefits-and also the practicalities, disbenefits, harms and personal, sociocultural and environmental impacts-of masks and masking. Our synthesis of evidence from over 100 published reviews and selected primary studies, including re-analyzing contested meta-analyses of key clinical trials, produced seven key findings. First, there is strong and consistent evidence for airborne transmission of severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) and other respiratory pathogens. Second, masks are, if correctly and consistently worn, effective in reducing transmission of respiratory diseases and show a dose-response effect. Third, respirators are significantly more effective than medical or cloth masks. Fourth, mask mandates are, overall, effective in reducing community transmission of respiratory pathogens. Fifth, masks are important sociocultural symbols; non-adherence to masking is sometimes linked to political and ideological beliefs and to widely circulated mis- or disinformation. Sixth, while there is much evidence that masks are not generally harmful to the general population, masking may be relatively contraindicated in individuals with certain medical conditions, who may require exemption. Furthermore, certain groups (notably D/deaf people) are disadvantaged when others are masked. Finally, there are risks to the environment from single-use masks and respirators. We propose an agenda for future research, including improved characterization of the situations in which masking should be recommended or mandated; attention to comfort and acceptability; generalized and disability-focused communication support in settings where masks are worn; and development and testing of novel materials and designs for improved filtration, breathability, and environmental impact.

Disposable surgical/medical face masks and filtering face pieces: Source of microplastics and chemical additives in the environment

The production and consumption of disposable face masks (DFMs) increased intensely during the COVID-19 pandemic, leading to a high amount of them being found in the terrestrial and aquatic environment. The main goal of this research study is to conduct a comparative evaluation of the water-leachability of microplastics (MPs) and chemical additives from various types of disposable surgical/medical face masks (MM DFMs) and filtering face pieces (FFPs). Fourier-Transform Infrared Spectroscopy was used for MPs analysis. Liquid Chromatography/High Resolution Mass Spectrometry was used to analyse analytes presented in the water-leachates of DFMs. FFPs released 3-4 times more microplastic particles compared to MM DFMs. The release of MPs into water from all tested DFMs without mechanical stress suggests potential MP contamination originating from the DFM production process. Our study for the first time identified bisphenol B (0.25-0.42 μg/L) and 1,4-bis(2-ethylhexyl) sulfosuccinate (163.9-115.0 μg/L) as leachables from MM DFMs. MPs in the water-leachates vary in size, with predominant particles <100 μm, and the release order from DFMs is MMIIR > MMII > FFP3>FFP2>MMI. The main type of microplastics identified in the water leachates of the investigated face masks was polypropylene, accounting for 93-97% for MM DFMs and 82-83% for FFPs. Other polymers such as polyethylene, polycarbonate, polyester/polyethylene terephthalate, polyamide/Nylon, polyvinylchloride, and ethylene-propylene copolymer were also identified, but in smaller amounts. FFPs released a wider variety and a higher percentage (17-18%) of other polymers compared to MM DFMs (3-7%). Fragments and fibres were identified in all water-leachate samples, and fragments, particularly debris of polypropylene fibres, were the most common MP morphotype. The findings in this study are important in contributing additional data to develop science-based policy recommendations on the health and environmental impacts of MPs and associated chemical additives originated from DFMs.

Adsorption-desorption behavior of florpyrauxifen-benzyl on three microplastics in aqueous environment as well as its mechanism and various influencing factors

Microplastics (MPs) and pesticides are two categories contaminants with proposed negative impacts to aqueous ecosystems, and adsorption of pesticides on MPs may result in their long-range transport and compound combination effects. Florpyrauxifen-benzyl, a novel pyridine-2-carboxylate auxin herbicide has been widely used to control weeds in paddy field, but the insights of which are extremely limited. Therefore, adsorption and desorption behaviors of florpyrauxifen-benzyl on polyvinyl chloride (PVC), polyethylene (PE) and disposable face masks (DFMs) in five water environment were investigated. The impacts of various environmental factors on adsorption capacity were evaluated, as well as adsorption mechanisms. The results revealed significant variations in adsorption capacity of florpyrauxifen-benzyl on three MPs, with approximately order of DFMs > PE > PVC. The discrepancy can be attributed to differences in structural and physicochemical properties, as evidenced by various characterization analysis. The kinetics and isotherm of florpyrauxifen-benzyl on three MPs were suitable for different models, wherein physical force predominantly governed adsorption process. Thermodynamic analysis revealed that both high and low temperatures weakened PE and DFMs adsorption, whereas temperature exhibited negligible impact on PVC adsorption. The adsorption capacity was significantly influenced by most environmental factors, particularly pH, cations and coexisting herbicide. This study provides valuable insights into the fate of florpyrauxifen-benzyl in presence of MPs, suggesting that PVC, PE and DFMs can serve as carriers of florpyrauxifen-benzyl in aquatic environment.

aPDI meets PPE: photochemical decontamination in healthcare using methylene blue-where are we now, where will we go?

Personal protective equipment (PPE) reuse, first recommended in the context of the SARS-CoV-2 pandemic, can mitigate shortages in crisis situations and can greatly reduce the environmental impact of typically single-use PPE. Prior to safe reuse, PPE must be sanitized and contaminating pathogens-in current circumstances viruses in particular-must be inactivated. However, many established decontamination procedures are not equitable and remain unavailable in low-resource settings. In mid-2020, an interdisciplinary consortium of researchers first studied the potential of implementing cheap and easy-to-use antimicrobial photodynamic inactivation (aPDI) using methylene blue as photosensitizer to decontaminate face masks and filtering facepiece respirators. In this perspective piece, we describe the development of this novel method, discuss recent advances, and offer insights into how equitable PPE decontamination via methylene blue-based aPDI may be integrated into circular economy policies in the healthcare sector.

Assessing disposable masks consumption and littering in the post COVID-19 pandemic in China

Disposable masks associated with COVID-19 pandemic are one of the most thrown plastic garbage items in the environment, even three years later, and they need more than 450 years to completely decompose. Given their harm to the environment and the absence of monitoring efforts to quantify the consumption and improper disposal of disposable masks in China, we carried out a survey to assess the consumption and littering of disposable masks nationwide. Our objectives were to quantify the consumption and littering of disposable masks and estimate the plastic pollution caused by disposable masks in China. According to the national survey, which combined online and offline results performed in March 2023, about 69% Chinese people still wear masks, and among of them, more than 93% used disposable masks, with more than 70% using more than one piece each day. Therefore, at least 20.3 billion disposable masks were consumed by Chinese people in March 2023 and 238.5 billion will be consumed in 2023 if there are no significant changes in circumstances. Meanwhile, more than 67% of the mask-wearing public disposed of the disposable masks into the household waste bin, and 7% of them discarded them at will. This means about 1.4 billion disposable masks, amounting to at least 350 tons of plastic pollution, were casually discharged into the environment during March 2023. The finding shed light on the inadequate management and disposal of disposable masks and highlight the urgency of preventing plastic pollution from disposable masks in China. It is recommended to raise public awareness of proper handling of disposable masks, institute strict management guidelines, and support innovations and research for nontoxic, biodegradable, reusable and easily recyclable masks.

Global face mask pollution: threats to the environment and wildlife, and potential solutions

Face masks are an indispensable low-cost public healthcare necessity for containing viral transmission. After the coronavirus disease (COVID-19) became a pandemic, there was an unprecedented demand for, and subsequent increase in face mask production and use, leading to global ecological challenges, including excessive resource consumption and significant environmental pollution. Here, we review the global demand volume for face masks and the associated energy consumption and pollution potential throughout their life cycle. First, the production and distribution processes consume petroleum-based raw materials and other energy sources and release greenhouse gases. Second, most methods of mask waste disposal result in secondary microplastic pollution and the release of toxic gases and organic substances. Third, face masks discarded in outdoor environments represent a new plastic pollutant and pose significant challenges to the environment and wildlife in various ecosystems. Therefore, the long-term impacts on environmental and wildlife health aspects related to the production, use, and disposal of face masks should be considered and urgently investigated. Here, we propose five reasonable countermeasures to alleviate these global-scale ecological crises induced by mask use during and following the COVID-19 pandemic era: increasing public awareness; improving mask waste management; innovating waste disposal methods; developing biodegradable masks; and formulating relevant policies and regulations. Implementation of these measures will help address the pollution caused by face masks.

Degradation of a New Herbicide Florpyrauxifen-Benzyl in Water: Kinetics, Various Influencing Factors and Its Reaction Mechanisms

Florpyrauxifen-benzyl is a novel herbicide used to control weeds in paddy fields. To clarify and evaluate its hydrolytic behavior and safety in water environments, its hydrolytic characteristics were investigated under varying temperatures, pH values, initial mass concentrations and water types, as well as the effects of 40 environmental factors such as microplastics (MPs) and disposable face masks (DFMs). Meanwhile, hydrolytic products were identified by UPLC-QTOF-MS/MS, and its hydrolytic pathways were proposed. The effects of MPs and DFMs on hydrolytic products and pathways were also investigated. The results showed that hydrolysis of florpyrauxifen-benzyl was a spontaneous process driven by endothermic, base catalysis and activation entropy increase and conformed to the first-order kinetics. The temperature had an obvious effect on hydrolysis rate under alkaline condition, the hydrolysis reaction conformed to Arrhenius formula, and activation enthalpy, activation entropy, and Gibbs free energy were negatively correlated with temperature. Most of environmental factors promoted hydrolysis of florpyrauxifen-benzyl, especially the cetyltrimethyl ammonium bromide (CTAB). The hydrolysis mechanism was ester hydrolysis reaction with a main product of florpyrauxifen. The MPs and DFMs did not affect the hydrolytic mechanisms but the hydrolysis rate. The results are crucial for illustrating and assessing the environmental fate and risks of florpyrauxifen-benzyl.

Microplastics/nanoplastics released from facemasks as contaminants of emerging concern

Facemasks have become a global medical necessity and are a key preventive measure against COVID-19. Typically, facemasks (FMs) are fabricated from non-renewable polymers, particularly polypropylene (PP) and polyethylene (PE), which release secondary microplastic (MPs) due to the chemical, physical, and biological processes. In light of the widespread usage and improper disposal of single-use facemasks, there is concern about their environmental impact since they contribute to plastic pollution during and after pandemics. The repercussions of this have led to millions of tons of plastic waste being dumped into the environment. Due to lack of awareness and improper disposal, the occurrence of micro/nanoplastics released from facemasks in wastewater treatment plants and landfills poses a concern. Infiltration of wastewater treatment processes by micro/nanoplastics at various levels can be problematic because of their chemical nature and broad but small size. Thus, operational and process stability issues can arise during wastewater treatment processes. In addition, landfilling and illegal waste disposal are being used to dispose of potentially infectious COVID-19 waste, leading to an environmental threat to animal and human health and exacerbating plastic pollution. This paper reviews the fate of facemasks in the environment and the repercussions of improper waste management of facemasks in wastewater treatment plants, landfills, and ultimately the environment.

Development of a desktop mask charger

Polypropylene mesh, integrated in N95 respirators and surgical masks that are widely used in the current crisis of COVID-19, filters aerosols via electrostatics in addition to the physical block. However, any contact to water such as storage under high humidity, exposure to exhaling breath, and washing in water removes its charges and thus compromises its filtering efficiency. We developed a desk top device based on a Cockcroft-Walton's voltage multiplier that can restore the electrostatic charge of surgical masks within 1 min and recover the filtering efficiency of the polypropylene mesh from 87% to 97%. The device is easy to operate and safe, thus may be applied for the reuse of surgical masks towards reducing the plastic wastes.

Marine litter in the Red Sea: Status and policy implications

The Red Sea's unique ecosystem is home to >1500 species. However, the presence of anthropogenic litter, whether from land-based or sea-based sources, may pose a potential risk to the Red Sea fauna and flora. This work analyzes marine litter in the Red Sea, utilizing the Drivers-Pressure-State-Impact-Response (DPSIR) framework to group findings in a survey of peer-reviewed studies. The review is further augmented with a survey of the current response, covering regional and national instruments. Although research addressing marine litter in the Red Sea is not as rich as for other seas, studies suggest marine litter is abundant and that the influx of litter is driven by recreational activity, fishing, and shipping. Moreover, the COVID-19 pandemic has exacerbated the influx of marine litter to the Red Sea due to improper disposal of personal protective equipment (PPE). The response has intensified in recent years, with regional and national frameworks established and initiatives driven by Non-Governmental Organizations (NGOs). We discuss whether the regional action plan addresses the specific concerns uncovered in marine litter studies while providing a comparison with plans of other regional seas.

Face mask and medical waste generation in the City of Baguio, Philippines: its current management and GHG footprint

The daily use of facemask to prevent virus transmission increases the negative effect on the environment because of improper waste disposal. Due to the absence of baseline data, the impact of facemask and medical waste generation, as well as the community's management practice, should be studied to avoid further environmental degradation. In this study, we surveyed 384 respondents and conducted computational analysis to provide an overview of the household's facemask usage and ecological footprint in combating Covid-19. Results showed that most respondents (48.7%) use two facemasks per day. Thus, an estimated 417,834 facemasks are disposed daily, generating 3,585 kg/day of additional waste. The average medical waste of Covid-infected individuals is 3.29 kg per day per capita. This yields 22,438 kg. of CO2 eq., which could contribute to the global warming potential; however, there is also a potential recovery of 61.572 gigajoules of energy for power generation. Most respondents are aware of proper facemask waste management practices, but some lacks application regarding responsible waste disposal. Despite the contribution of facemask to the overall solid waste generation, the city's current management remains a challenge since disposable facemasks are potentially mixed with other types of waste from its storage, collection, and disposal.

Supplementary Information

The online version contains supplementary material available at 10.1007/s10163-023-01601-2.

Review of research on migration, distribution, biological effects, and analytical methods of microfibers in the environment

Microplastics have been proven to be one of the critical environmental pollution issues. Moreover, microfibers, the most prominent form of microplastics in the environment, have likewise attracted the attention of various countries. With the increase in global population and industrialization, the production and use of fibers continue to increase yearly. As a result, a large number of microfibers are formed. If fiber products are not used or handled correctly, it will cause direct/indirect severe microfiber environmental pollution. Microfibers will be further broken into smaller fiber fragments when they enter the natural environment. Presently, researchers have conducted extensive research in the identification of microfibers, laying the foundation for further resourcefulness research. This work used bibliometric analysis to review the microfiber contamination researches systematically. First, the primary sources of microfibers and the influencing factors are analyzed. We aim to summarize the influence of the clothing fiber preparation and care processes on microfiber formation. Then, this work elaborated on the migration in/between water, atmosphere, and terrestrial environments. We also discussed the effects of microfiber on ecosystems. Finally, microfibers' current and foreseeable effective treatment, disposal, and resource utilization methods were explained. This paper will provide a structured reference for future microfiber research.

Probing nanoplastics derived from polypropylene face masks with hyperspectral dark-field microscopy

The high worldwide consumption of cheap plastic goods has already resulted in a serious environmental plastic pollution, exacerbated by piling of disposed personal protective equipment because of the recent outbreak of COVID-19. The aim of this study was to assess the feasibility of dark-field hyperspectral microscopy in the 400-1000 wavelength range for detection of nanoplastics derived from weathered polypropylene masks. A surgical mask was separated to layers and exposed to UV radiation (254 nm) for 192 h. Oxidative degradation of the polypropylene was evidenced by ATR FT-IR analysis. UV treatment for 192 h resulted in generation of differently shaped micro- and nano-sized particles, visualized by dark-field microscopy. The presence of nanoparticles was confirmed by AFM studies. The hyperspectral profiles (400-1000 nm) were collected after every 48 h of the UV treatment. The distinct hyperspectral features faded after prolonged UV exposure, but the assignment of some particles to either blue or white layers of mask could still be made based on spectral characteristics.

Analysis of Marine Microplastic Pollution of Disposable Masks under COVID-19 Epidemic-A DPSIR Framework

Marine microplastic pollution (MMP) is becoming one of the most pressing environmental problems facing humanity today. The novel coronavirus epidemic has raised the issue of environmental contamination caused by large-scale improper disposal of medical waste such as disposable masks (DMs). To assess the impact of MMP caused by DMs and to seek solutions for the prevention and control of MMP, this study uses the Driving force-Pressure-State-Impact-Response (DPSIR) framework to establish a causal chain of MMP caused by DMs. The conclusion shows that the novel coronavirus epidemic has led to a surge in the use of DMs, which has brought pressure on resource constraints and environmental pollution at the same time. Improperly DMs enter the environment and eventually transform into MMP, which not only endangers the marine ecological system but also poses potential human health risks as well as economic and social hazards. In addition, further research on environmentally friendly masks (cloth masks and biodegradable masks) is essential to mitigate the environmental damage caused by the large-scale global use of DMs. This study provides a scientific and theoretical basis for the assessment of MMP from discarded DMs, and the findings of this study will provide a reference for the formulation of relevant policies.

Regional water pollution management pathways and effects under strengthened policy constraints: the case of Tianjin, China

In recent years, China has attached great importance to pollution control, and national and many provinces have introduced water pollution management policies in the hope that improvements can be made. However, there is currently a lack of objective and adequate assessment of the effectiveness of water pollution management (WPM) at the regional level, especially a lack of in-depth research on the causes of improvement, key measures, and pathways of action. This paper constructs an evaluation index system based on the driver, pressure, state, impact and response (DPSIR) model and evaluates the WPM performance of Tianjin based on the five aspects comprising the DPSIR model. The results show that WPM performance in Tianjin has been commendable, improving from 76.15 points out of 100 in 2014 to 90.93 points out of 100 in 2018. The score increased more rapidly from 2016 to 2018 after the regional policy was implemented. The main reason for this encouraging phenomenon is the significant improvement in water quality. From 2016 to 2020, the closure of high pollution industrial enterprises and the regulatory management of aquaculture have significantly reduced pollutant emissions. At the same time, under the constraints of the river chief system, pollutant discharge permits, discharge standards, ecological compensation agreements on water pollution and other policies in Tianjin, the effect of pollution source control is obvious, with improved water quality and high public satisfaction.

Microfiber releasing into urban rivers from face masks during COVID-19

Face masks play a crucial protective role in preventing the spread of coronavirus disease during the COVID-19 pandemic, but the improper disposal of used face masks also causes an emerging environmental problem, such as microplastic contamination. Here, the aim was to evaluate the improper disposal of used face masks and, subsequently, the potential contribution to microplastic contamination in urban rivers. First, we investigated the occurrence of discarded face masks in Qing River through continuously one-month collection on-site, and the disposable masks with a density of (8.28 ± 4.21) × 10-5 items/m2 with varying degrees of wear and tear were found. Next, the microfibers shedding from two popular types of new disposable masks were tested. The results showed that 50.33 ± 18.50 items/mask of microfibers, ranging from 301 μm to 467 μm in size, were released from the disposal face mask after immersion in ultrapure water for 24-h. It was significantly higher than the KN95 respirator of 31.33 ± 0.57 items/mask, ranging from 273 μm to 441 μm. Besides C and O elements only found in new face masks, some potentially toxic elements were also detected on the surface of discarded face masks, indicating that various environmental contaminations are easy to adsorb on the surface of discarded face masks. The results implied that these discarded face masks in an aquatic environment are emerging sources of microfibers and could act as transport vectors for contaminants, which would aggravate the present microplastic contamination. In conclusion, these findings were expected to raise public awareness of the proper disposal of used face masks to prevent microplastic contamination and the spread of COVID-19 in the environment.

Recycling of plastic wastes generated from COVID-19: A comprehensive illustration of type and properties of plastics with remedial options

Plastic has contributed enormously to the healthcare sector and towards public health safety during the COVID-19 pandemic. With the frequent usage of plastic-based personal protective equipment (PPEs) (including face masks, gloves, protective body suits, aprons, gowns, face shields, surgical masks, and goggles), by frontline health workers, there has been a tremendous increase in their manufacture and distribution. Different types of plastic polymers are used in the manufacture of this equipment, depending upon their usage. However, since a majority of these plastics are still single-use plastics (SUP), they are not at all eco-friendly and end up generating large quantities of plastic waste. The overview presents the various available and practiced methods in vogue for disposal cum treatment of these highly contaminated plastic wastes. Among the current methods of plastic waste disposal, incineration and land filling are the most common ones, but both these methods have their negative impacts on the environment. Alongside, numerous methods that can be used to sterilize them before any treatment have been discussed. There are several new sorting technologies, to help produce purer polymers that can be made to undergo thermal or chemical treatments. Microbial degradation is one such novel method that is under the spotlight currently and being studied extensively, because of its ecological advantages, cost-effectiveness, ease of use, and maintenance. In addition to the deliberations on the methods, strategies have been enumerated for combination of different methods, vis-à-vis studying the life cycle assessment towards a more circular economy in handling this menace to protect mankind.

Effective recycling of disposable medical face masks for sustainable green concrete via a new fiber hybridization technique

Global public response to the COVID-19 (SARS-CoV-2) pandemic is highly focused on human health. However, conservationists have cautioned of unprecedented threats to the natural environment from a new type of non-biodegradable microplastic waste resulting from extensive use of disposable medical face masks (DMFMs). Thus, this waste must be recycled in an eco-friendly manner on an urgent basis. In this research, we developed a new environmentally friendly recycling technique using waste DMFMs in sustainable green concrete. More explicitly, a new fiber hybridization approach has been introduced in which two types of fibers namely DMFM fiber and basalt fiber (BF) were incorporated into fiber reinforced recycled aggregate concrete (FRAC). The volume fractions of DMFM fiber were 0%, 0.1%, and 0.2% and the volume fractions of BF were 0%, 0.25%, and 0.5%. In addition, two mineral admixtures (fly ash and ground granulated blast furnace slag) were also used. Test results indicated increase of approximately 12% in compressive strength, 26% in split tensile strength, and 60% in flexural strength of FRAC containing hybrid fibers and mineral admixtures. The density and ultra-sonic pulse velocity (UPV) of DMFM fiber- and BF-modified FRAC ranged from 2406-2433 kg/m3 and 4502-4541 m/s, respectively, which meets structural concrete requirements. The water absorption rate gradually increased with an increase in the volume fractions of fibers but remained within the allowable water absorption limit for construction materials. Lastly, the microstructure investigation indicated excellent concrete quality, improved interfacial transition zones (ITZs), and good compatibility of host concrete matrix with both DMFM fiber and BF that correlates well with the experimental results reported in this study.

Public face masks wearing during the COVID-19 pandemic: A comprehensive analysis is needed for potential implications

Face mask-wearing as a public health measure has been practiced since the coronavirus 2019 (COVID-19) pandemic outbreak. Extensive research has shown that face masks are an effective non-pharmaceutical measure to contain the spread of respiratory infections. However, recent studies indicate that face masks release microplastics and other contaminants that have adverse health effects on humans. This communication reviews the evidence for face mask as a potential source of contaminants capable of adversely affecting human health. The benefits of face masks in reducing the transmission of SARS-Cov-2 (severe acute respiratory syndrome coronavirus 2) and seasonal communicable diseases were addressed. In addition, the risk of inhaling microplastics and organic contaminants, as well as the associated exposure level, were discussed. Finally, the potential research gaps that need to be addressed were outlined to provide a holistic view of the problem. This communication has illustrated that face mask-wearing as a public health measure to contain the spread of COVID-19 could be a potential risk factor for human health. Very few studies have been done on microplastics, organic pollutants, and trace metal inhalation from surgical masks. However, future work providing a comprehensive understanding of the risk and exposure levels needs to be undertaken.